A mirror is a must-have attribute in every home. This is not only a functional piece of furniture, but also a decorative element. Sometimes it becomes necessary to attach a new mirror to the wall yourself. Properly executed fastening will not only protect an expensive item from damage, but will also make the appearance of the fixation points as elegant and beautiful as possible. As a result, the interior will not be spoiled and the appearance of the mirror itself will be impeccable.
Methods for attaching mirrors to the wall
In order for a mirror attached to a wall or cabinet door to be securely fixed, you should decide on the method of its installation. There are several of them, and to choose the most suitable one you need to consider the following:
- The nature of the surface on which the canvas will be attached. How easy it is to drill holes or drive dowels in it.
- Product size. With a large area, some fasteners can deform the mirror and cause cracks to appear.
- Presence of frame. In this case, you can use glue or double-sided tape, although not in all cases.
- Possibility of dismantling the mirror later. Eliminated when using glue.
- Desired appearance. Few people want to see protruding hooks or other details.
Considering the above, it is easy to choose one of the mounting methods:
- dowels, nails;
- special holders;
- glue;
- double sided tape.
Now, thanks to the development of the chemical industry, there is large selection enough reliable adhesives. They will cope with the task perfectly and will hold tightly glass product on the wall. There is also a good selection of mechanical fasteners.
Wall mounting without drilling
Fastening will be simple and reliable using special holders. They do not require drilling of the mirror. The choice of this accessories in stores is very large and allows you to choose holders for every taste. Installation is done as follows:
- Attach the mirror to the wall, mark the mounting points. You need at least six (2 each from the bottom, left and right).
- Drill holes and install dowels in them.
- Place the selected holders onto the screws.
- Screw the screws into place.
- Insert the product from above.
A mirror installed in this way will not be drilled, which eliminates the associated risks.
How to hang a mount on dowels
Using dowels, hanging a mirror will be a more time-consuming and problematic task. This is due to the need to drill holes in it. Without the proper skills and special tool the product may be damaged. For fastening with dowels you need:
- Take care of the holes in the canvas itself. It is better to order this service from professionals.
- Make marks on the wall at the mounting points. To do this, attach the mirror to the surface and mark the desired places.
- Drill into the wall at the marked points.
- Insert the dowel bushings into the holes.
- Attach the mirror and screw in the screws, having previously installed the clamping parts on them.
- The last step: check the strength of the installation, and cover the screw heads with special caps.
ATTENTION! When making such fastening you need to be careful, especially with marking the places for the dowels. The mirror should be clearly in the desired position.
How to hang a mirror without nails
The main means for such fastening are special double-sided tape and glue. In addition to aesthetic purposes, this method will be preferable if the wall is made of fragile material, for example, plasterboard or foam block. Such a surface is not capable of supporting the heavy weight of the mirror on the dowels.
Produced this operation So:
- Prepare the wall. The surface must be flat and smooth. Prime if necessary.
- Degrease the surfaces to be bonded.
- Apply glue to the decorative item or stick it with tape. You should be careful with the glue near the edge - if it squeezes out beyond the border, it can ruin the appearance.
- Press the product against the wall. If glue is used, you will need to install the supports and hold them for a while.
ATTENTION! The choice of glue or tape must be taken seriously. Any means will not work; you will need special ones designed for this. You can find suitable tape or glue at your local hardware store.
How to attach a mirror without a frame
Depending on the wall surface, there are several options for attaching the product without a frame. The simplest one is using glue or double sided tape. This method is perfect if the wall does not hold nails very well, for example, made of foam block or drywall.
Another option is to use decorative profile or special holders. This fittings are securely fixed with dowels or self-tapping screws. First, the lower parts into which the canvas is installed are attached.
How to mount a large mirror on the wall
Mirror large sizes will look good in many interiors. But fixing it is not an easy task and requires professional approach. If you decide to install it yourself, you should pay attention to the following things:
- Be sure to make sure that the wall is perfectly level. Otherwise, the mirror will not last long.
- Choose quality glue or tape. At heavy weight canvas, add an additional fastening at the bottom in the form of a profile.
- Apply glue according to instructions. After installation, secure the canvas with supports and keep it there for several days.
Availability large mirror It can be dangerous in the house - the likelihood that it will break is higher. As a precaution, it is advisable to cover it with a special film, especially if there are children. This step will prevent the possibility of scattering fragments.
Features of mounting on walls made of different materials
The properties of some materials will not allow you to securely hang a mirror on them. For example, drywall has a very fragile structure, so it is preferable adhesive methods fastenings If there is a need to use dowels, it is better to use butterfly dowels specially designed for this.
You can attach a mirror to concrete in any way. Before working with glue or tape, the surface must be prepared - coated with a primer. Another feature of this material is strength. It is more difficult to make a recess for the fastening in it than in others. For this you will need a hammer drill.
Hang mirror cloth on PVC panels, which are often used to decorate toilets, is quite problematic. Silicone glue will help here. Drilling holes in polyvinyl chloride would be a bad idea - it won’t be very reliable.
To avoid problems with this task, you need to take into account not only the characteristics of the wall material, but also the size of the mirror and the selected fittings.
On a brick base
Before work, you need to prepare the surface. To do this, it is cleaned and coated with a primer. Mounting on a brick surface can be anything.
If glue is chosen, you need to remember that once installed, the canvas cannot be removed. Therefore, you need to work with extreme caution. Use glue according to the instructions, without spreading it over the entire surface of the decorative element.
The most in a simple way fastening is double-sided tape. To use it, just degrease the surface, stick it in strips at intervals of up to 8 cm, remove the protective film and press the product to the surface.
Other ways to hang a canvas on a brick base are carried out in the same way as on other surfaces.
On the tiles in the bathroom
When working with tiles, gluing the product is the best choice. The glue you need to choose is as moisture resistant as possible. Silicone sealant well suited for these purposes. It is also resistant to temperature changes. When fixing the product in the bathroom, it is a good idea to remove the tiles in the mounting area. Ideal option– foresee in advance and do not cover the location of the future mirror. There is no need to remove the tiles at all. Well-chosen glue and thorough cleaning of surfaces from grease and dirt will make the connection quite reliable.
Hardware and other holders will also cope well with the task. It is advisable to try to choose the size of the product so that you can install them in the joints between the tiles.
On drywall
Products with a large weight (from 10 kg) plasterboard wall It's better not to hang it. Drywall is a very fragile and unreliable thing. Best choice When installing the mirror you will need glue and double-sided tape. If in the future you foresee the need to dismantle the product (this is impossible with glue), you can use butterfly dowel mounts.
For wallpaper
Hanging canvas on wallpaper using glue or double-sided tape is not a good idea. This method is possible only if the product weighs no more than two kg, but even in this case the use of these means is not advisable. It is better to use any mechanical fasteners (holders, decorative strips).
The task of hanging a mirror yourself, although difficult, is doable. Before you start, you need to prepare thoroughly. Get the right tool, carry out measurements and calculations. If you treat it with due attention and patience, everything will work out.
IN lately Frameless mirrors are becoming increasingly popular among consumers. And this is not without reason, because this is how the minimalism so beloved by many is achieved and the creation of modern design in premises of any type. However, the question of how to hang a mirror without a frame on the wall is an open one for many home craftsmen, which is why we consider it advisable to fill this gap.
Mirror mounting options
Considering the high demand for frameless mirrors, many manufacturers of specialized equipment offer consumers various options fixing the material. We would like to consider the most popular of them.
Attaching the mirror with tape
You can often hear the opinion that fixing a mirror to a wall is best done using double-sided tape, for which it is enough to apply the material to the underside of the mirror and stick it in a given place. However, such an approach can only be applied if the base has a smooth structure (MDF, laminated chipboard, PVC panels, tiles), and the weight of the decorative element does not exceed 1 kg.
Firstly, the surfaces to be glued must be absolutely dry, clean and free of easily peelable elements (wallpaper, whitewash, etc.).
Secondly, it is advisable to apply tape not only around the perimeter, but also in the central part of the mirror.
Thirdly, you should not resort to the specified method of fixing in places high humidity, since the adhesive ability of the tape in this case will be minimal.
Fixing mirrors using glue
You can hang a mirror without a frame on the wall alternative way using specialized adhesives (for example, “liquid nails”). Moreover, the operating algorithm in this case is that on the reverse surface of the mirror using mounting gun glue is applied with a small roller (along the perimeter and in the central part), and after that the mirror is simply pressed to the base in the required place. And at the end of the work, it is advisable to fix the mirror in a stationary state for a time sufficient for the adhesive to harden (you can support the mirror with spacers or fix it with tape).
Just as in the previous case, certain requirements are imposed on the quality of the base base, and although manufacturers of “liquid nails” guarantee high adhesion of the substance to almost any surface, it is still not justified to glue mirrors on top of wallpaper and other finishing elements (alternatively, under the location of the mirror wallpaper can be removed or installed over the existing finish sheet material, and glue the mirror to it).
In addition, for better adhesion, it is recommended to prime the base base, and carry out work only after the wall has completely dried. Well, of course, it is not advisable to fix mirrors using glue on uneven surfaces, because the area of contact of the elements in this case will be small, and accordingly the quality of the work will be in question.
Mechanical fixation of frameless mirror
Refers to the most reliable options for attaching a decorative element to the wall. Indeed, in this case, specialized fittings act as holding elements, by means of which the mirror is held in the required position. And although many users are skeptical about this mounting option due to their visual unattractiveness, today manufacturers of such equipment produce decorative fasteners that can fit perfectly into any room.
Installation of a frameless mirror in this case also does not cause any particular difficulties and consists in the fact that first the location of its installation is determined (and the corresponding markings are applied to the wall), and then, with a certain indentation along the entire perimeter, recesses are made in the wall and dowels are installed.
At the end of the work, the mirror is leaned against the wall, and screws with fittings are screwed into pre-mounted dowels, due to which the mirror sheet will be held in the required position.
It should be noted that mechanical fixation The use of frameless mirrors is justified not only for enclosing structures, but also for furniture elements. Moreover, there are no significant requirements for the quality of the base base, unlike the options described above.
It is very easy to visually expand a small room and make it brighter if done in in the right places installation of mirrors on the walls, at a certain angle to the light source.
Mounting a mirror on the wall in various ways
You can see your reflection in calm water and various polished metal objects. And even in an ordinary glass surface you can see yourself if you stand in the light, and there is darkness on the other side. However, in fact, the mirror is the same glass, it’s just that a special amalgam is applied to the back side, which ensures the refraction of the rays, creating a reflection. The thickness varies, from the thinnest plates within 2-3 millimeters, to reliable half-centimeter options, which can be drilled for through fixation with screws.
By the way, it is not advisable to perforate glass yourself; it can easily crack; it is better to entrust this task to specialists or buy a model with ready-made holes. Mirrors are sold mostly as is, without baguettes; the kit may include fasteners and brackets. You can limit yourself to ordinary screws, especially if they have decorative heads, the main thing is that they are wide enough. There are special plate fittings that allow you to mount several mirrors closely in one or several rows, covering most of the wall or its entire surface.
Another common way to mount mirrors on the wall is in frames to which special hinges are attached for screws or construction nails. Small mirrors can be glued to the wall using double-sided construction tape or special glue (liquid nails are not always suitable, due to the composition that can destroy the amalgam). It is not recommended to fasten mirrors with a side size of up to 50 centimeters with screws or massive fittings, since the fixing elements will be too noticeable.
Detailed instructions on how to hang a mirror on the wall
Very often, even during the construction of a house, the places where various interior items, including mirrors, will be located are determined. Sometimes this is justified by the fact that the owners plan in advance to expand the space with the help of reflection, or prudently prepare a place for the child to practice ballet. And, since such planning involves long-term placement of the interior detail in question, it is very important to know in detail how to properly hang a mirror on the wall in the bathroom or hallway.
Master class mirror installation - step by step diagram
Step 1: Preparing and marking the wall
It is very important that the surface on which the mirror will be mounted is perfectly flat. Therefore, the wall needs to be leveled as thoroughly as possible, the plaster should be dense, without cracks and primed from dust. Otherwise, if you decide to use glue to fix the mirror, you can apply it to any finish, including wallpaper. After making sure that the selected area is absolutely level, we make markings using a plumb line and level so that the glass is fixed without distortions. We mark the vertical line along which we will be guided with a coated thread, instead of which a laser beam can be used.
Step 2: Setting the bottom point
Having determined the height at which the lower edge of the mirror will be located, we prepare the appropriate trimmings of the timber. In order for the glass to stand level, two supports are enough. Due to the fact that the geometry of the room may be incorrect, and the floor slab may not coincide with the horizon, just in case, we prepare thin plates of plastic or metal that can be used to build up supports.
Step 3: Preparing the Mirror
We wipe the back side with a thin layer of amalgam with careful movements using a soft, slightly moistened rag, removing the slightest particles of dust.
Then we take special glue for mirrors or liquid nails with a neutral composition that will not destroy the reflective coating.
Apply small portions of glue in dots every 20 centimeters. in even rows. Carefully set the glass interior part aside.
Step 4: Preparing the Supports
After the mirror is installed on the bars, there is a possibility that with a careless movement they will be knocked out from under the edge of the glass. As a result, misalignment may occur. To prevent this from happening, it is recommended to glue the supports to the wall with construction tape as tightly as possible.
Step 5: Attaching the Mirror
All that remains is to install the prepared mirror on the bars (after applying the glue you need to act quickly so that it does not start to dry out) and press it against the wall.
Using a level, we check the positioning relative to the horizon and, if necessary, place pre-prepared plates under the lower edge.
We rub a rag over the entire glass surface, pressing lightly so that the glue spreads over the entire area of the back side, and at the same time erasing traces from our palms. The bars can be removed after 2 days.
If you need to mount several mirrors, the supports can be installed at the joints between them so that the lower edges are at the same level.
Installing a mirror on a wall in a bathroom differs only in that all gaps between the edges of the glass and the wall must be sealed with sealant to prevent moisture from getting on the amalgamated surface.
Which mirror to hang in the hallway - design secrets
Reflective surfaces in rooms often serve not only their intended purpose, but also to improve the layout. In particular, narrow corridor, on one of the walls of which a wide full-length mirror is suspended will appear much wider. And having installed over glass surface or on either side of it a couple of lamps, you can get the effect of diffused light. Stained glass film will help to decorate the piece of furniture we are interested in to match the design of the room.
Remembering the law of physics “angle of incidence equal to angle reflections", can be directed by mirrors sun rays so as to disperse the darkness in the most remote, remote corners of a house or apartment. It should be remembered that when exposed to direct ultraviolet radiation, amalgam fades over time, causing the mirror to become cloudy. It is also undesirable to hang mirrors at an angle to the vertical, since the reflection in this case will be somewhat distorted. For greater convenience, it is recommended to follow certain rules when placing the piece of furniture we are considering.
First of all, in order to fully use a full-length mirror, you need to hang it so that you can step back at least 1.5-2 meters from it.
In addition, in order to fully see yourself in reflection from such a distance, the lower edge of the glass should be no more than 50 centimeters away from the floor. Based on the average height of a person, it is recommended to place the top edge of the mirror at a height of at least 170 centimeters. If you only need to see your face, for convenience it is better to purchase a reflective surface with a vertical edge length of at least 40 centimeters. Which mirror is best to hang in the hallway? A model with a height of 60 centimeters will give comfortable view to the waist, up to 120 centimeters - from the top of the head to the knees, and at full height - from 140 centimeters.
How to hang?
It is impossible to imagine the life of a modern person without a mirror - or rather, without many mirrors: in the bathroom, bedroom, dressing room, hallway, office hallway, etc. Hanging mirrors are perceived naturally and as a matter of course until the need arises to hang the mirror yourself. This is where you have to think, because the walls are different everywhere, and the weight of the mirrors can vary significantly. The biggest difficulties probably arise when you have to hang a mirror in the bathroom or on a plasterboard wall. Let's figure out how this can and should be done.
How to hang a mirror in the bathroom?
If there is tile on the wall in the bathroom, and it’s brand new, you don’t really want to drill into it. Doubts plague me: “What if it cracks or falls off along with the mirror?” What to do? It is best, of course, to prepare a place under the mirror in advance. That is, choose and buy plumbing fixtures, bathroom furniture and a mirror before the renovation begins. Having chosen the place where the mirror will be located, you can not cover it with tiles, but leave free space. If the wall in this place is concrete or brick, attaching a mirror will not be difficult. However, it will hang here until the next renovation.
Well, if the repairs have already been done, there are several options. The first is suitable for those cases when the mirror is really heavy, and hanging it with glue seems impractical. You will have to drill the tiles and the wall.
We hang a mirror in the bathroom. Drilling
There is no need to be afraid that the tile will crack - if the tile itself is of high quality and is glued well, nothing will happen to it. First you need to choose a place for the mirror, using a level to make a line where the mirror will be attached. Holes must be made in this place. Their number depends on the width of the mirror and the number of fasteners on it (if the mirror was already sold with holes for fasteners and with the fasteners themselves).
Before drilling, you need to make holes in the tiles: for this you can take a screwdriver and a glass drill. After making neat holes in the tiles, you can arm yourself with a drill and make holes in the wall under the tiles. Dowels are inserted into the holes and screws are screwed in. All that remains is to hang the mirror, if, of course, it is already equipped with fasteners. We hope no one will think of attaching a mirror only to tiles? You need to attach the mirror to the wall!
Since we are talking about the bathroom, it is worth saying that most mirrors designed specifically for this room are already on sale with holes and fasteners
. These fasteners are decorative: a cap is placed on the front side of the mirror - a kind of “knob” chrome-plated, nickel-plated, imitating bronze or gold, or even wood.
The fastener becomes an element of the mirror and is combined with other details of its decoration, especially if the mirror is complex design with shelves, lighting, etc.
So if bathroom mirror
equipped with a mounting system, all that remains is to hang it and smile at your reflection.
What if the mirror is solid, without fasteners? You can also drill holes in the mirror, and buy decorative fasteners in the store (sold in the departments of fasteners and accessories for mirrors).
However, making a hole in a mirror is a very delicate process. A mirror is a fragile thing, and this must be taken into account.
The optimal solution is to take the mirror to glass makers so they can make holes the right size in the marked places.
But, if you have experience, you can do this work yourself. Diamond drills are usually used for this. To prevent the mirror from cracking, you need to ensure its cooling during the drilling process. At home, they make something like a plasticine bath, fill it with water and stick it in place of the future hole. They drill carefully, step by step, checking whether there is any water left in the plasticine bath. If necessary, top up. It is also recommended that, when interrupting drilling, drip turpentine onto the hole formed, and then continue working. When the holes are drilled, they need to be rounded using sandpaper, but this work also needs to be done very carefully and slowly so as not to overheat the glass, which can cause it to crack. |
Making holes required diameter, you can screw in the fasteners and decorative plug, prepare the wall and hang the mirror - you're done! For reliability, a mirror suspended from a fastener can be additionally glued to the wall with special double-sided tape.
We hang a mirror in the bathroom in the space between the tiles
As already mentioned, you can leave space for the mirror without covering it with tiles. In this case, the mirror, if it is not heavy and the wall is smooth, can simply be glued to liquid nails, and the joints of the tile and mirror can be treated with sealant. If placed on a thick layer of glue, the mirror will deepen. If you do not want this effect, you can do this: nail or glue it to the wall metal profile, place a sheet of moisture-resistant drywall on it and attach a mirror to the drywall - using liquid nails or using fasteners, but in in this case you need to use a butterfly dowel.
Some people place a mirror between the tiles on a layer of tile adhesive or even cement. Of course it's very reliable fastening, however, the mirror in this case must have protective layer. Otherwise, the amalgam may darken over time from contact with cement. There are tips to process back surface seal the mirrors with mirror sealant and only then place the mirror on the cement.
In any case, you get a “built-in” mirror, which is very beautiful and original in its own way.
Hanging a bathroom mirror on tiles without drilling
If the mirror is not very heavy, you can simply glue it to the tile.
To do this, use special sealants (glue) for mirrors or special double-sided adhesive tapes (they are also called “double-sided mounting tape for mirrors”). For reliability, both methods are sometimes combined: glue is distributed around the perimeter, and several adhesive tapes are glued parallel to each other in the center. Then the protective layer is removed from the tapes and the mirror is attached to the wall.
First, of course, you need to use a level to mark off the line on which the mirror will hang. When hanging a mirror, you need to immediately level it, as the strips and sealant stick quickly. To mount the mirror, special suction cups are used, but it is not profitable to buy them for one time, therefore, if the mirror is large enough, it is better to use someone’s help.
Mirror tape can be moisture resistant. By the way, some manufacturers of bathroom tiles also produce it. Before gluing the mirror, the tiles must be cleaned and degreased with alcohol, allowed to dry and only then the mirror must be glued. After gluing the edges of the mirror, it is recommended to treat it with a sealant to prevent moisture from entering the space between the mirror and the wall and, as a result, damage to the amalgam. Treatment with a sealant should be done when the adhesives used to secure the mirror are completely dry.
How to glue a mirror using tape or liquid nails?
If you only use adhesive tapes, distribute them around the perimeter of the mirror and in the center - parallel to one another. Gluing the mirror liquid nails or a special glue-sealant, distribute the composition in small portions around the perimeter of the mirror at a distance of approximately 5-7 cm from each other. Do not put glue on the corners, otherwise, when pressing the mirror against the wall, it may “float” out and ruin both the tile and the mirror. By the way, not every liquid nail is suitable for attaching a mirror. Buy only those that indicate that they can be used to glue a mirror.
You need to press the mirror against the wall for at least 10 minutes. If it is too heavy, it is necessary to provide supports for a day.
How to hang a bathroom mirror on a PVC panel
If the bathroom has PVC panels, the place for the mirror also needs to be planned in advance - even before finishing works. In the place where the mirror will hang, they are mounted additional elements lathing, onto which the mirror is subsequently fastened using dowel-nails, anchors, etc. A lightweight mirror can be glued to PVC using the same mounting tape or liquid nails. If the distance between the wall and the panels is not too large, you can drill to the wall if desired. However, it will be easier to buy a moidodyr - a cabinet with a sink and a mirror already attached to it.
In order to hang any objects on a plasterboard wall, you cannot use ordinary nails. Typically used special butterfly dowels
. The longitudinal ribs of such a dowel protect against rotation. This dowel also has a locking edge that prevents the fastening system from falling into the hole.
The butterfly dowel is used when you need to hang a mirror weighing up to 20 kg. If it weighs more, it can become a serious burden for. In this case, a sheet of plasterboard is hemmed from the inside or outside another sheet of drywall or plywood. Fastening is done using butterfly dowels or anchor bolts.
In the same way, using special dowels or anchors, a hook or rail is installed to hang the mirror on a fishing line, rope, or chain.
Today they sell special brackets for hanging mirrors . First, the bottom line is marked on which the staples are attached. The mirror is simply inserted into these brackets. After which the staples are attached from above. Thus, the mirror is clamped in the brackets.
There are many ways to hang a beautiful mirror on the wall with your own hands, beautifully and securely. It all depends on the parameters, the material of the surface on which you will mount this product, as well as the operating conditions in the room where you plan to install it. There are many installation methods that everyone can do and do not require special knowledge. Let's look at how to attach a mirror to a wall.
Features of fastening to different surfaces
Much during installation depends on the material from which the walls are made. For different reasons different rules mirror installation.
The differences are mainly concentrated in the fastenings (different fittings and different tools are used), the weight of the mirror, which is acceptable for these walls.
Let's look at the main ones.
Concrete
Concrete is the main material of many home floors. To make a hole in such a wall, you will need a hammer drill. Glue the mirror product to concrete wall can be done using a special glue, but initially you should coat it with a primer that increases the adhesion of the mirror to the base. Not every massive mirror will hold securely, so in some cases glue alone will not be enough.
Drywall
This material is in high demand. To install a reflective product on a plasterboard base, you need to drill a hole using suitable tool(regular screwdriver, professional drill). Must be used at work special types fastenings (for example, a butterfly dowel or anchor bolt). The fastening technology is subject to weight.
If the mirror sheet is not too heavy and weighs up to 10 kg, you can use liquid nails or construction tape with two adhesive sides to fix it to the base. If the weight of the mirror sheet is large, additional reinforcement of the wall will be required. However, strengthening is not always effective: drywall is not good reason for placing massive mirrors.
If excessive stress is placed on it, it can crack and even crumble.
PVC wall panels
PVC panels are a building material used for wall cladding bathrooms and toilets. Sometimes it is not possible to install a mirror on these panels; it is advisable to look for another place to attach the accessory before installation. This material itself is not suitable for fixing large mirrors, so small products are often attached to it. A base of wooden blocks will help to install a small mirror sheet efficiently.
You can stick an oversized product weighing 1–2 kg on it. If the distance from the facing part to the main side of the wall is small, it is recommended to make a small hole in the plastic covering, drill into the wall itself behind it and then install a mirror on it.
Tile
Tile is another type of cladding; you can attach a mirror to it in many ways. You can pierce the tiles with a concrete drill, but it is better to use a glass drill. You should not fix the product only on the tile: you need to deepen the hole in the wall itself. If you initially know the location of the mirror, you can leave space for the mirror even at the stage of laying the tiles themselves.
To make height differences invisible, between tiles and another layer of plaster is applied with a mirror cloth or the product is secured to fasteners in the form of a plasterboard board that is not afraid of moisture. The joints are treated with a special glue for mirrors and glass.
To secure the product to a wall with wallpaper, you just need to use a standard dowel. But after repair work I rarely want to make holes in new walls to install mirrors. Don’t forget: one day you will want to change its location, and when you move it, a hole will be visible in the same place, which will be quite difficult to hide. Therefore, in some cases, based on the dimensions of the mirror, it is glued to the base with double-sided tape, glue with polyurethane and hidden plugs are used.
If the products have large decorative elements, due to which the products become 2 kg or more heavier, it makes no sense to glue them to the wallpaper: they can fall and break.
How to hang?
There are many ways to securely secure a reflective object to a selected surface. The mirror fastening should be reliable, simple and discreet in appearance. You can often easily attach a mirror in any room of your home with your own hands, without involving a specialist. Let's consider several methods.
Using glue and sealant
Decorative item small size(weighing up to 10 kg) can be easily fixed with glue or sealant. The composition of the glue helps to install the product well without damaging the walls. This is the most popular method for those who want to install small mirrors in their home without compromising the integrity wall covering. This method should be used for materials with low load-bearing capacity.
This method works if you don't want to drill into new wall tiles or furniture surfaces. If the walls themselves are smooth, the mirror sticks to them easily and looks smooth.
Holders
Besides adhesive connection you can use decorative holders that are sold in construction stores. Such mounts cannot support the weight of massive panoramic mirrors, but they will securely fasten small accessories to the surface of the walls. In this case, the fastening will not only be reliable, but also beautiful.
Staples
You can purchase brackets with through fasteners that will support the product from below or from the side. Today you can find many different types of mirror holders of this type. They differ in the material of manufacture, the complexity of the design and the original appearance.
These are extremely convenient elements that do not require drilling holes in the mirror, which is important for those who often rearrange furniture.
Suspensions
Mirrors can be secured using pendants in the form of 2 screws, a thread glued to a solid substrate (panel).
Drilling holes
If the previous fixation methods are not suitable and the mirror sheet does not have a frame, it is worth creating holes in the mirror sheet itself. Holes are drilled in it, then it is secured to the wall or cabinet doors. You can use the usual self-tapping screws or special fasteners with plastic compensators that prevent cracks from appearing in the product.
In addition to the main methods, there is still the use of a profile. It is mounted on the wall, then the mirror is installed, securing the top using one of the methods described above. Double-sided tape is inappropriate in this case.. Special fittings will do. Holders in the form of brackets, strong brackets and metal strips help to easily secure the product to the desired wall.
The fastening sequence is the same in most cases. First, mark on the coating the place where the fasteners will be fixed. You will have to use 2 fasteners at the bottom - they will bear the heaviest load. You will also have to use 2 fasteners at the top. You must understand: the heavier the fabric, the more fasteners will have to be used.
Using plates
Option suitable for mounting frameless mirrors. This method has almost no downsides. The product is securely fixed to the wall, it will look great in the interior of any room. This hidden fastener will create the illusion of floating.
These plates are made from steel sheets with a thickness of 0.7 mm. Steel coating strengthens the plate, makes it resistant, so it is not afraid of various damages. Special glue will provide good fastening these plates on the surface of the product, the unusual composition of the glue will not damage the spraying of the product. Before using glue, the surfaces must be thoroughly degreased. then the mount will serve for many years.
Framed mirrors
Typically, mirrors in the frame have their own fasteners when purchased. Even if they are not there, it will not amount to a lot of work buy hinges, secure them to the frame and hang the mirror using screws. For heavy canvases with massive frames, it is best to purchase special types of plates. They are made of high-quality metal; a number of existing holes for self-tapping screws will help securely attach the plates to the frame.
Products without frame
Many people choose mirrors without frames, since massive frames with ready-made fasteners are almost impossible to find in stores. Applicable in such models different ways fastenings:
- The simplest option for securely attaching mirrors without frames to walls is to install them using special fittings. You can choose interesting clamps, original metal strips where the canvas is placed without drilling.
- Installation is carried out using special tape for installation. This is how the canvas is most often mounted on walls made of tiles, PVC panels, laminated chipboard. Scotch tape works well for light mirrors glued into furniture.
- More often for not large mirrors apply special glue. It is sold in tubes; it is a glue for a hot-melt gun, which becomes viscous when heated and hardens when it dries. It contains no acids, so it does not spoil the amalgam. For models large size You can use liquid nails by treating the inside of the product with sealant. This glue is sold in tubes and bottles for a construction gun. The mass sets quickly, the connection will be especially strong.
- Securing the mirror small dowels requires drilling through holes. If you are inexperienced, it will be difficult to drill clean holes without damaging the mirror. First, choose a method for attaching the mirror (at the time of purchase). If you choose the dowel method, you can ask that the mounting holes in the mirror be drilled in the shop itself.
- The more massive the mirror, the more durable the mount should be. You can try to fix a product with a diagonal of more than 40 cm with glue, but no one can guarantee that it will be a good fastening. For massive mirrors, you can use a more familiar method (2 plugs and 2 screws).
- If the product does not have a base made of compressed cardboard or plastic on the reverse side, you need to glue it to it. homemade screen made of cardboard or plank made of wood. For mirrors with a diagonal of 50 cm or more, you need reinforcement from a small wooden base in the form of a rail - it is for this that the frame of the product is fixed to the wall surface. The rail is secured with glue at a distance of one-fourth the height of the glass. After this, one screw is screwed at a distance of 5-6 cm from its ends. There is no need to screw them all the way into the rail; it is important to leave 2 mm.
When choosing a method for attaching a mirror, based on the wall material, its reliability, do not forget about the place in which this mirror will look most advantageous. It's no secret that sometimes it is not possible to place the mirror canvas where you want. The reason may be design features premises, lack of footage.
IN small apartments Each piece of furniture has its own place, which limits the space for the mirror itself. To simplify the task, you can pay attention to some nuances:
- In a small darkened room, it is worth placing a mirror opposite the window opening to give more light to the room. The mirror will extend across the entire wall of the bedroom small room twice.
- You should not hang a glass product in the kitchen near the stove: high temperature and couples will provoke frequent care, will affect appearance mirrors
- Before hanging the canvas panel in the bathroom, cover its ends and back with a special sealant.
Cover the mirror in the children's room with a special film that will prevent the product from flying apart if it breaks.