How to stick a static stained glass film (detailed instructions and video). How mirror film is glued to windows: the secrets of professional and non-professional installation What problems can arise when self-sticking a film on glass

There are several ways to escape the summer heat. The first is to buy an air conditioner, but this is an expensive pleasure. The second is to hang blinds in the room. It is more profitable, but the product is not durable. In addition, it must be regularly looked after. The third is to stick a film that would protect from sunlight. The method is the cheapest, takes little time, and anyone can do it. More than one video has been made on how to stick sun protection film on a window, but the main aspects of transforming a room are covered below.

Features of the film from heat and sun

This is not about aluminum foil, but about the film. The first is opaque, the second has one transparent side. This edge during installation, it turns into the room.

The film can be applied to the window both from the outside of the windows and from the inside. It is made from metallized polyethylene terephthalate, at the final stage of manufacturing it is a mirror. The transparency of a sunscreen product is different, and the service life when applied externally is estimated at 2-3 years. If you stick a transparent foil on the window from the inside, the durability increases significantly.

The advantages of a solar control film (in addition to the function implied by the name) are:

• high degree of light and heat reflection;
• prevention of fading of furniture, interior items, expensive items that are sensitive to the sun;
• the ability to protect yourself from prying eyes from the street.

Some users noted the negative side of the product - the difficulty in transmitting ultraviolet rays, which is bad for indoor plants. But even if you cover them from the sun with a film, the necessary amount of light and heat will still reach the foliage and soil, allowing the flowers to develop normally.

Product installation instructions

To properly stick the film on the window, you will need the following tools, which are usually present in every home:

• detergent/cleaner for windows and mirror surfaces;
• water atomizer (liquid sprayer);
• rubber or plastic spatula (cotton and viscose fabric);
• stationery knife.

There are two ways to install solar control film. The first one is not reliable and consists in gluing the product on adhesive tape, adhesive tape or fixing it with buttons to the frame. It is better to stick the film on the window using a special solution.

Sequential installation of a sun protection product includes the following steps:

• Window washing.

A special tool is used. It is better to wash the surface on both sides.

• Solution preparation.

It is a mixture of liquid soap and water. It is not necessary to shake it strongly, as abundant foaming will occur. The mixture is prepared in a spray bottle, after which it is sprayed. The properties of soap will allow you to properly glue the film, moving it to the desired position.

• Alignment of the film on the window.

The sun protection product is applied to the surface, moved to the desired position. When it "sits down", you need to take a spatula and gently smooth the film from the center to the edges. This will remove the bubbles. When the surface becomes perfectly even, smooth, leave it to dry completely.

• Removing excess edges.

If a workpiece of the required size was not cut before gluing, it is possible to separate the excess parts of the material after the film has dried.

It is advisable not to make the template strictly according to the size of the window, since after drying it may shrink.

Features of installation of anti-vandal films

There are products that can not only protect the room from the sun, but also prevent penetration from the outside, as well as make the glass more resistant to mechanical damage.

Anti-vandal films are mainly used in banks, museums, shopping centers, institutions where expensive and valuable items are located, but they can find a place, for example, in a luxurious country cottage.

Structurally, the product differs from the sunscreen, so the technology of application to the surface is somewhat different. The composition with which the film is fixed on the window is indicated on the label or in the instructions. Also, complete drying lasts much longer, ranging from 2 to 4 months. At the same time, it is necessary to ensure that the mechanical impact on the anti-vandal foil during this period is minimal.

The user will prolong the life of their thin film applied windows by considering the following recommendations:

• it is better to choose the most opaque product (except when the windows face north or on a territory heavily darkened by trees);
• during the first month after complete drying, it is undesirable to wet the film; later treatment with detergents will not violate the integrity of the windows and will not affect the durability of the product;
• owners who are worried about the health and safety of their children or pets should take a closer look at the anti-vandal type of foil - in addition to protection against burglary, it reduces the risk of damage by glass fragments.

To escape from the summer heat, you can go different ways. If tenants decide to put sun protection film on the windows of their apartment. They will guess with the fastest, most profitable and highly efficient way. It remains only to choose the right type of product, not miscalculating with its transparency. A few minutes of work are worth it to always be comfortable indoors.

https://www.youtube.com/watch?v=vaitBn6w69U Video can "t be loaded: How a mirror sun protection film is glued onto windows (https://www.youtube.com/watch?v=vaitBn6w69U)

Self-adhesive mirror film has not surprised anyone for a long time. More and more people are using it to make their lives more comfortable and beautiful. What is this material, what advantages does it have?

What is mirror film

Note! Self-adhesive polymer films with a metal coating that reflects light are called mirror films.

A variety of film materials have varying degrees of light reflection, thickness and density, affecting its quality and price.

At one time, mirror films were very popular with motorists. for several reasons:

• hid those sitting in the car from prying eyes;
• partly protected the interior from overheating;
• sun protection film on the windshield shielded the driver's eyes from sunlight and oncoming headlights;
• high-density film materials protected the glass from breaking and dispersing small fragments.

True, at night and in the evening, the visibility of the road was sharply reduced, which increased the accident rate. And therefore, in a number of countries, tinting of car windows was prohibited.

But transparent materials with an adhesive surface began to be used for home and office windows.

At one time, mirror films were very popular with motorists.

Material for manufacturing

The most common raw material for the production of reflective film materials is (PVC). Differ 2 types of films:

1. Calendered, rolled with hot calender rolls, melted granules or polyvinyl chloride powder. Belongs to the economy class. The disadvantage is, albeit slow, but shrinkage, a tendency to shrink.
2. Cast ones are produced in a slightly different way, and are of higher quality. Polyvinyl chloride granules with dye (for tinting materials) are melted in the furnace. The molten mass flows out onto the belt, forming a film. Passes through the primer rollers, then heats up again. At this stage, a polymer plasticizer is added. The heated mass is rolled out by the calibrator, cooled and wound on the shaft. Cast tape is of higher quality. It is less prone to shrinkage, more plastic, and therefore does not tear as quickly as calendered.

Please note that cast films are stronger, higher quality. If you want the self-adhesive to last longer, choose cast.

Elite film polymers include those made polyurethane. They are distinguished by higher wear resistance, strength, and are not afraid of temperature changes. But they are also much more expensive.

The most common raw material for the production of reflective film materials is polyvinyl chloride (PVC).

mirror film prices

mirror film

Mirror Film Properties

Light reflection

Reflection of light is the main purpose of a mirror material. From the street, it looks like reflective foil, or a mirror. It reflects the sun's rays, objects, people on the street. Materials with tinting have the appropriate shades: blue, green, cherry, brown, etc. Silvery films reflect up to 30% sunlight. Tinted films absorb part of the sun's rays, so that even less light enters the room.

Dark tint finishes undesirable to stick in children's rooms, kitchen, living room, as they absorb up to 80% of light. In autumn and winter, when there are very few sunny days in residential premises, dusk will reign, people will experience discomfort. During the day, additional lighting is required.

It is advisable to stick darkened tints on the bedrooms, especially if the sun looks there in the morning and is used only for sleeping. In other rooms, bluish or silver is suitable.

Mirrored solar control film protects the room and objects in it from burnout. This property can be successfully used in art galleries, museums.

Thermal insulation

Summer sun rays have a negative effect on furniture. Summer heat destroys the lacquer surface, causing it to crack. Under the action of heat, the veneer on cabinet furniture may lag behind.

Upholstered furniture also suffers from the sun's rays. Fabrics burn out, lose light. Artificial leather, leather substitutes crack under the influence of heat within 2-3 years, the upper “leather” layer peels off. Wallpaper on the walls is subject to fading.

As you know, a significant proportion of winter heat loss falls on glass. Self-adhesive mirror film has properties, and will not release heat from the house. Thus, in the summer, the mirror film for the window will not let excess heat into the house from the street, but in the winter it will not let the heat out of the house.

impact resistance

Self-adhesive mirror film on windows significantly increases strength glass. The increased impact resistance is explained three reasons:

1. The adhesive layer that holds the film on the window somewhat links the crystal lattices of the glass, thereby increasing the impact resistance.
2. Part of the impact force is absorbed by the polymer, and the glass bears a significantly weakened force.
3. Even if the glass does break, it will hold on the adhesive layer.

The most durable polyurethane film materials are able to protect glass from a blast wave or from a shot from a traumatic pistol.

decorative properties

From the street, mirrored glass looks unusual. In low-lying windows you can look like in a mirror.

Mirror sun protection film is an excellent solution for French balconies, where the bottom glass is often covered with colored metallic tinting.

Scope of mirror films

A decorative film in the form of a mirror appliqué or rosette looks unusual and stylish. Polyvinyl chloride (PVC) - most often used in interior design. It is ideal for decorating ceilings and walls. Mirror PVC panels without an adhesive layer are used as stretch ceilings. Unlike window films, ceiling film is not a transparent material, and therefore ceiling mount systems, electrical wiring and communication pipes are perfectly hidden under it. PVC material has high enough strength, not prone to flammability.

The disadvantage of PVC films is that at -15°C they become brittle and brittle. This limits the use on the street, but does not prevent the use of mirrored or decorated with a pattern, self-adhesive films in the interior of the room. For example, sheets of stained glass film are glued to interior glass doors, wardrobes, etc.

Polyurethane films can be mirror and stained glass. Self-adhesive stained glass navels are used in car tuning.

Mirrored windows are used for pasting large windows in offices and shopping centers.

Automotive PU films protect the surface of the car from impacts of pebbles flying off from under the wheels of passing cars.

Along with the thinnest films, made of PVC and other plastics, a denser sheet material with a metallic reflective surface is produced, which is used for decorating walls.

Such sheets have a thickness of up to 2 mm, and are glued to smooth, carefully plastered walls. A safe mirror pushes the walls apart, visually enlarges the space. You can stick it in the bathroom without fear that it will break and hurt someone.

How to stick a mirror film

Mirror Self Adhesive Window Film pasted by yourself if the glass is small. But it will be more convenient and efficient to work with an assistant. One holds the film so that it does not slip, the other pulls and expels water from under it. A sheet is cut from the film to fit the glass plus an allowance of approximately 1 cm on each side. The sheet is pasted on cleanly washed damp glass.

It is important that there are no grease stains and dust on the window before pasting. Therefore, before pasting, the glass is washed with warm water with the addition of dish shampoo. Then the remains of the shampoo are washed off the glass, and the glass itself is wetted with clean water. Water is applied with a household spray gun both on the glass and on the film. On moistened glass, the canvas is easily adjusted and leveled.

After the material has been leveled, water is expelled from under the upper edge, and the edge of the sheet itself is rubbed so that it grabs a little with the glass.

Then, with a rubber spatula, water should be carefully expelled from the center to the edges, holding the material with one hand.

Try to keep it from moving out and puckering up.

In conclusion, when all the water has been driven out, the frame must be wiped of water with a soft cloth, and the excess carefully cut off with a wallpaper knife, but so as not to damage the wood or plastic.

Note! In the same way, you can glue the mirror.

The film material pasted on the mirror will extend the life of the glass and make it safe. This is especially true if there are small children or pets in the house.

Where to buy mirror film

Mirror self-adhesive films for interior decoration can buy in construction, hardware stores and even on the Internet. There is consumer demand for film polymers, which store owners strive to satisfy. The price ranges from 250 to 650 rubles per 1 linear meter. Wholesale buyers, for example, companies specializing in working with interiors, can purchase a film sheet in a roll at a wholesale price - from 1,400 rubles per roll.

Useful video: how to stick a mirror film on a window

Inexpensive film coatings used in the interior have another advantage. Annoyed polymer is easily removed from the wall or glass with a hair dryer. And in its place, you can stick a new coating of a different color, with a different pattern. Thus, the interior can be refreshed at any time.

In a multi-storey building on the top floor, it is not easy to escape from the heat and heat. Someone installs tinted windows, but not everyone has the opportunity to choose this option. Therefore, there is a completely modern and affordable solution - a mirror film for windows. What are the features of such a film, what types are there and how to glue it correctly, as well as other details and useful recommendations - you will learn about everything from this article.

Peculiarities

Mirror film is perfect for any window. This is the best solution for those who want to live and work in comfortable conditions, as such a film allows you to keep the room cool. Now, in the heat and heat, you do not have to use cooling devices, which will significantly save on electricity. And in the winter season, such a film will easily keep the accumulated heat in the room. Misted windows can also be forgotten thanks to this modern material.

With such protection, you will be reliably protected from harmful UV rays, and the rooms will not overheat during the hot season. In addition, furniture that is closest to the window will not fade, wallpaper will not fade, paintings and house plants will always be in comfortable conditions.

As a rule, this material is made using polymers, due to which the strength of the glass itself is significantly increased. In addition, such a film will not allow passers-by to see what is happening outside the window, indoors during the daytime. But from the inside the street will be perfectly visible.

It is worth noting that despite the fact that all types of such protective materials for windows are considered tinting, the lighting in the room will be the same, and during the day you will not have to use an additional light source.

Such a solution for windows allows you to give any building a special look, make it more attractive. The material is completely non-toxic, does not emit any harmful substances. And thanks to the anti-reflective effect, the eyes will not get tired looking out the window.

If we talk further about the advantages of this product, then it is worth mentioning that thanks to the film, the pasted glass becomes impact-resistant. In addition, in case of breaking, there will be no dangerous fragments. It is important to note the fact that it will be almost impossible to break the glass from the outside. This will keep your home safe from thieves. For personal safety and unexpected situations, this is very important.

Another advantage of this product is that its price is quite affordable. Therefore, many prefer this particular material.

Kinds

Today in specialized stores you can find a large number of different films that are designed to protect the window. Most often, there are conventional sunscreen options that are attached with an adhesive. And someone does it with tape. But there is also a self-adhesive film, which is much more practical to use.

Sun protection film can also be very different. Many of them not only protect from the sun, but also have other qualities.

• It could be reflective model. Such a product is guaranteed to reflect at least fifty percent of the sun's rays. They are different: blue, bronze, silver or green. This option is considered to be very budgetary and average in terms of efficiency. You can find a similar product with high efficiency. Such a film is able to reflect the sun's rays by almost one hundred percent. You can always find all the detailed information on the product packaging to make the right choice.

• Energy saving option- This is a protective film that reflects the sun's rays, and also filters heat. As a rule, this option is installed on the inside of windows.

• There is also a protective or, as it is also called, shockproof model. As you may have guessed, the main advantage of this option is that the film will reliably protect the glass from any external damage and make the glass more durable. When broken, there will be no fragments, pieces of glass will remain on the film.
• decorative the model will not only protect the premises from the heat, but also give a special style to a boring window. Such a film can be with a completely different pattern. It can be natural motifs, abstraction, geometric shapes and so on. There are even models that resemble a luxurious stained glass window. The surface of such models is often matte. The only disadvantage of this option is that it is unable to perform its functions one hundred percent. That is, such a film unevenly transmits and reflects the rays of the sun. Often come across decorative models without drawings. As a rule, they come in all colors of the rainbow, and you can choose any color in order to give the room an unusual and attractive look.

• spatternaya It perfectly blocks not only the sun's rays, but also infrared radiation. Such a product not only absorbs heat, it reflects it, preventing it from penetrating into the room.
• You can often find such a description - architectural film. Do not think that this is some special type of film. Often, manufacturers call so all models of such a protective material for windows.

How to stick?

Of course, professionals in their field will be able to quickly and efficiently cope with the work, properly pasting the glass in your apartment. In fact, if you know all the subtleties, then gluing the film on the windows is not so difficult. Pasting will not take you much time, but it will require extreme accuracy.

Usually this material is sold in rolls. Therefore, to begin with, you will need to cut the blanks. That is, cut the film in such a way that it is suitable for your window.

Remember that the workpiece itself should be slightly smaller than the glass. This will allow you to do better work.

Once the blanks are ready, you will need to prepare the surface itself. It is possible to glue the workpiece to dusty and dirty glass, but the work will be of poor quality and short-lived. Therefore, we recommend cleaning the glass and degreasing it.

Then carefully apply the adhesive to the glass itself. Such a tool may well be the most common soap solution. It will need to be evenly applied to the surface of the glass. If necessary, be sure to remove the residue with a sponge, which should be at hand. Experts recommend pouring such a solution into a spray bottle, which will allow you to easily and evenly apply the liquid to the glass.

Further, everything is simple - the film is applied to the prepared glass and everything is ready. Pasting is recommended to start from the top, from one corner. After the film is already on the window, it will be necessary to smooth out the “wrinkles” and correct irregularities and bubbles. Take any soft and dry rag, smooth the material on the surface of the window with gentle movements. You need to do this from the center, gradually moving towards the edges. Such a simple procedure allows you to lay the protective material on the glass as evenly as possible. Then everything must be left to dry for two to three days.

In the event that the film is self-adhesive, then it will be much easier to deal with pasting. How to properly prepare everything is described above. The only thing is that you will not need to apply an adhesive. On the reverse side of the film there is a protective layer that will need to be gradually removed during pasting.

It is not recommended to remove the entire layer at once. First, peel off the layer at the very top, carefully attach the film to the glass surface and stick it. You should get a strip of centimeters in five. Then gradually removing the protective layer of several centimeters, glue the base and slowly move downwards. To make the film lay down easily and correctly, you can use a silicone spatula. Gently smooth the surface with it from above, and slowly remove the protection from the back. In this case, it is important not to rush.

After you apply any of the selected types of protection to the windows, they will not need special care. Such a surface can be safely wiped with a clean cloth.

Most importantly, do not use chemical detergents, as well as products containing alcohol. These aggressive substances can damage the protective layer of the film.

As for which side to apply the film on, there is no definite answer. Mirror versions of such materials are often mounted on the outside of the window. It happens that they paste over the windows from the inside. Some experts mount such products between glasses for greater strength. That is, inside the window structure itself, if the window model allows it.

Pasting with this material is recommended to be carried out at a comfortable temperature. The temperature in the room and on the street should not be more than thirty-five degrees. The best option is twenty-five - thirty degrees of heat. In the event that it is cool, then the pasting will not be of high quality, and the film will not be able to dry well. This means that the overall quality of work will be unsatisfactory.

It will become a real salvation in the hot summer season, when it is difficult to hide from the sun even at home.

Currently, there are more than a dozen types of tinted solar control film for windows, which differ in the degree of darkening, density and method of gluing, as well as cost and service life.

The advantages of the film and how to install it

After sticking the mirror film, you will get the following benefits:

• UV delay by 98% - harmful rays will not enter the rooms, but the illumination will not change in brightness.
• The possibility of dismantling the product when not needed - after the end of the hot season, the film is removed (subject to certain conditions, which we will discuss later).
• Adequate lighting - now working at a computer or watching a movie will only be a pleasure and you do not have to constantly turn the screen from the sun.
• Protection from prying eyes in the daytime - the mirror surface will hide the entire room, and passers-by will not be able to look into your window. All they see is their own reflection.
• Reliable fastening of glass fragments - when the film is pasted, broken glass will not fall apart, and fragments will not fly into the apartment.
• In winter, the sun-protection film will serve as an obstacle to the release of heat - it will help to accumulate it more efficiently.

Installation of a mirror sun-protection film

If necessary, you can do the work on gluing the film on the windows on your own, however, if you have no idea how to glue the tinting on the windows of the apartment, it is better to use the services of professionals or at least carefully study the technology and each stage of such work.

For self-gluing the film, you will need tools such as:

1. Scraper,
2. Spray,
3. Stationery knife,
4. mild detergent,
5. Soft rubber or plastic spatula.

The film has an adhesive base, that is, it is a self-adhesive product.

Before starting work, it is necessary to prepare the glass.

1. Cleaning glass from dirt with mild detergents.
2. Removing old stains and marks with scrapers. If glue for plastic windows remains on the surface of the glass, then you will need to use a metal or wooden tool to remove the composition.
3. After cleaning the glass, thoroughly wipe it dry. For this purpose, a towel made of any soft fabric, such as microfiber, is ideal.
4. After the preparatory work is completed, it is necessary to measure and cut the film, and then you can proceed to the direct installation of tinting, which is carried out in several steps:
5. Moisten the glass with soft, purified water with the addition of detergent, liquid soap or baby shampoo.
6. Release of the film from the protective layer.
7. Application of a sun-protection film on the window surface, uniform distribution of the material over the entire glass area.
8. If the edges go beyond the glass, they should be carefully trimmed with a knife.
9. Residual water is removed from under the glued film with a spatula.
10. The renewed window must be left to dry completely, which usually takes about a week.
11. After completing all the above steps, you will soon be able to enjoy high-quality tinting that will protect your home from the hot and bright sun in any weather.

Anyone can cope with the installation, even if you have never glued such products before, you just need to responsibly approach this task.

VIDEO INSTRUCTION

Disadvantages of a mirror surface

Consider the possible disadvantages regarding specifically the mirror coating.

• The film has a mirror surface on the side where it is lighter. That is, during the day it will be brighter from the side of the street and for passers-by the glass will be a real impenetrable mirror. But in the evening and at night you will have to use curtains or blinds, because now it will be lighter on your side and it will not be difficult for onlookers to look out the window, especially on the first floors.
• Another disadvantage is the difficulty of dismantling with proper gluing according to the instructions.

Otherwise, this method of sun protection can be considered universal. You will always be safe, keep your things from fading.

Reasonable cost is an added bonus.

Mirror film, which is pasted over windows, consists of high quality polymers. It increases the strength characteristics of glass surfaces, protects the interior of the room, preventing ultraviolet radiation from entering. Window tinting is a great way to keep cool inside the apartment, keep prying eyes from the outside, completely preserving the privacy of your personal life.

Mirror self-adhesive film: protecting windows and rooms from the sun, how to properly stick on windows

Mirror film on windows is increasingly common, not only in business premises, but in private properties. This device has many advantages.

The composition has an important ability that determines its intended purpose - it captures ultraviolet radiation, does not let it into the rooms. Solves the problem of overheating of the internal space of houses, the windows of which face the south, east sides.

Important! Properly done tinting saves electrical energy, when the room is not heated, the need to use air conditioning disappears.

Advantages of Mirror Film

Self-adhesive product, has a variety of colors, differs in the level of blackout. The essence of its application remains the same - it protects the rooms from the penetration of a large amount of heat inside, protects the glass surface from destruction.

Safety from prying eyes

When a person passing by looks inside, he will see his own reflection. This property of the material is appreciated by consumers, protects privacy against outside intrusion.

The property is lost when electric lights are turned on inside. Thick curtains used in the evenings will help correct the situation.

Improves the performance properties of glass

Increases the performance of the glass surface:

• increasing the strength of the glass surface;
• protection against accidental breaking;
• in case of violation of integrity, the canvas remains fused, it is held by the composition;
• reduces the risk of injury and cuts.

Enough light for indoor work

Inside the rooms, a sufficient level of illumination is maintained, which makes it easy to go about your daily activities. There is no need to use additional light sources (before dark). The use of raw materials is a great way to really save electrical energy, which distinguishes it from curtains that completely darken the interior of rooms.

No sun glare or reflections

The composition of the sun-protection type completely removes the sun glare that appears on the screens of computers, laptops, TVs. This allows you to work or relax, without unpleasant discomfort, unnecessary stress for the visual organs.

Stylish design

There are many varieties of tinting material with different colors and textures. Raw materials are suitable for any interior, skillfully complementing it, emphasizing individuality.

Material disadvantages

In addition to the advantages, it has a number of disadvantages that should be considered.

Flaws:

• it is impossible to regulate the intensity of the penetrating light;
• protection against prying eyes is possible during the day, by the light of electricity, everything becomes visible;
• cold time is associated with minimal heating of rooms.

How to care for the mirror film on the window?

Manufacturers offer different options for such raw materials:

1. Reflective: reflects up to half of the sun's rays. The film differs in colors (green, blue, bronze, silver). It is budget-friendly, has an average level of efficiency. You can find raw materials with a high level of ultraviolet reflection.
2. Energy Saving: Protective option that filters heat. The material is fixed from the inside of the glass surface.
3. Shockproof: protects the plane of the window, reducing the likelihood of external damage, making it stronger. During the breaking, all the fragments simply hang.
4. Decorative: fights heat by changing the style of rooms. Models contain abstract drawings, geometric shapes, natural motifs, stained glass surface. Sometimes people get a matte surface, this brings a certain element of sophistication. This option reflects the sun's rays unevenly.
5. Spatter: retains the sun's rays, infrared radiation, absorbs heat, reflecting it.
6. Architectural: some manufacturers distinguish it separately, although this is the name of any kind of protective raw material.

An important advantage of the tinting agent is that a properly glued product does not require special care. Glass surfaces are wiped with a damp cloth. They are easily cleaned with detergent, without the use of compounds containing abrasives, chemicals, acids or alcohol.

How to choose and stick a mirror film on the window glass?

Mirror film on glass is sold everywhere. To choose the right type, you should pay attention to the tips.

• when the windows of the house are to the south, east, you should purchase a product with high density. It must contain a minimum of 28 microns;
• buy products from manufacturers with a good reputation, a long work experience. A low-quality product will not fulfill its goals. During heating, the product is capable of releasing harmful chemical compounds, which will adversely affect human health;
• we must not forget about the need to equip window blocks with curtains. When the main lighting is turned on in the evenings, the film ceases to fulfill its function of protecting the space from prying eyes. Therefore, you should purchase beautiful, functional curtains;
• material can be applied from any side of the surface. Some manufacturers put models inside double-glazed windows to increase their strength characteristics (this method is implemented when the characteristics allow);
• gluing is carried out when the temperature does not exceed 35 degrees Celsius, the optimal interval is 25-30 degrees. This will allow the raw material to dry completely;
• to make the pasting process convenient, experts recommend first removing the double-glazed window.

Film editing is quite simple to manage, it is enough to have free time, invite an assistant.

Pre-prepare the necessary tool:

• scrapers;
• distillation;
• spray bottle with soapy water;
• stationery knives;
• spatula with a wide base.

Important! Work is carried out, from 5 to 35 degrees Celsius. Such conditions will allow the adhesive layer to fully dry. Humidity indicators can range from 20 to 80%, to increase the parameter you will need a spray gun.

Sticking scheme:

1. Wash the glass surface thoroughly using water with a few drops of baby soap, mild shampoo.
2. Measure the dimensions of the window.
3. Cut the material with a clerical knife: cut with 2 mm allowances. The material is allowed to join in width.
4. Moisten the work area with soapy water from a spray bottle.
5. Spread the product on a flat surface.
6. Gradually remove the protective layer.
7. Treat the released material with soapy water.
8. Attach the moistened film to the glass plane.
9. Smooth out from the center to the periphery.
10. While there is liquid under the raw material, its position should be corrected.
11. Use a spatula to remove moisture from under the material.
12. As it dries, the glass will lighten a little, become transparent. This process can take up to two weeks.

When the gluing technology is violated, various problems arise:

• the surface under the material dries instantly, which makes it difficult to evenly straighten it, or remains wet for a long time: it means that the process goes on without observing the temperature regime (5-35 degrees of heat will be optimal);
• smoothing is done with a cloth, this creates difficulties, making it difficult to fully remove water from the inside. It is better to purchase a special scraper than to engage in re-gluing later;
• the surface of the glass was covered with small air bubbles (some people pierce them with a needle, after smoothing the plane). Proper installation prevents swelling. The problem arises due to the poor quality of pre-washing the glass, or insufficient dispersal of moisture, air;
• small bubbles are best left, without piercing with a needle. When their diameter is less than 3 mm, there is a possibility of further self-smoothing;
• when the perimeter of the protection peels off, this is evidence of the acquisition of a poor quality coating, without providing the required level of adhesion, or minimal moisture, smoothing the glass.