The desktop for miter saws &ndash is professional equipment, designed for the use of this tool and its quick transportation to the right place. It provides reliable installation material to be processed and operator safety.
Design features
Reliability. The material for the manufacture of the structure is high-strength steel or aluminum alloy, so that the table for miter saw can withstand 180 & ndash250 kg depending on the model.
compactness. Products can be folded in length by two or more times, which facilitates their transportation and storage. Many models are equipped with special wheels for transportation.
Light weight. The catalog contains tables for end saws within 10&ndash29 kg.
Structural stability. The legs are adjustable in height, which ensures a solid position of the entire structure, even on uneven surfaces.
Ease of use. The table extends, has roller stops that support long workpieces for sawing. Can be equipped with a workbench.
Our range
Online store site offers by attractive prices big choice devices for working with miter saws. You can buy from us:
- beds and tables (conventional and transformers) for working with long products
- goats to support blanks when cutting with a chainsaw.
When choosing a design, you should focus on maximum dimensions and the mass of the workpiece to be processed, as well as the operations that should be carried out on it. Delivery of orders is organized in Moscow and other cities of Russia.
Table for a miter saw in artisanal conditions
Table for a miter saw is a device that serves as the basis for installing this type of saw, facilitating work on face machining various kinds materials as in strictly vertical plane, so not at the required angle.
What it is
Worker installation table miter saw carries a solid base where this cutting tool, a miter saw, is mounted. You will like this design. It is made of a metal profile of various sections. different metal, and additionally durable types of plastic. Additional elements (side extensions, guide shelves, not stops) can be made from lumber (board, plywood, chipboard or OSB board).
The dimensions of the table depend on the geometric dimensions of the material being cut (lumber, metallic profile, tubes as it is also called fittings). You will like the design more permanent, as it is also called sliding, which allows you to change the surface area of \u200b\u200bthe table, which also depends on the material being processed and the working conditions.
The table, starting from the nature of the work performed, you will like it to be made stationary, as it is also called portable installation, with a device of legs, as it is also called, providing for installation on a flat horizontal surface located above the floor level.
DIY miter saw table
Read also
Support table, where there is an option to perform trimming various materials by installing miter saw, buy in construction tool stores, where wide range of similar products. However, there are cases when it is not possible to buy what exactly is needed for the process of performing work, then the question arises, how to do it yourself.
Initially, you need to answer several questions, on which the parameters of the product under construction depend, not the material that will be used, these are:
- Where will it be installed.
- At what level will we perform fixing on the floor, in other words, a different surface.
- What material and what geometric dimensions are to be processed.
- What type, method of fastening is not the geometric dimensions of the end saw, which is to be installed on the manufactured table.
Preparatory stage
During such a period, you should answer, as for yourself, the questions that were described above, then draw a sketch of the product under construction.
Worker saw table Metabo KSU 400
AllTools.ru presents an overview desktop for drank Metabo KSU 400.
Performing work on the manufacture of the table
Of course, the frame will be made from a metal profile of various sections, available in the assortment set. The geometric dimensions of the frame depend on the available area where the equipment will be mounted, the dimensions of the miter saw and the type of installation (stationary or portable).
On the frame, it is necessary to provide for the installation site of the saw, which must correspond to the one in the assortment set (geometric dimensions, the height of one of the marks of a possible cut, the possibility of changing the spatial arrangement).
Read also
Regardless of the size and shape of the frame, it is necessary to provide for side extensions of the table, which can be made of durable plastic, sheet metal, or plywood. The presence of side extensions working surface makes cutting workpieces easier long size. If the side extensions are located below the level of the surface of the miter saw, then it is necessary to provide for the installation of special shelves along which the workpieces will move.
Will not be useful side stops, due to which, after fixing them, of course, trim a lot of workpieces according to fixed size. For stops use corners from different kind metal, equipped clamping elements, through which the stops are fixed on working surface, in addition, other elements (bosses, bars, etc.) made of wood, in other words, plastic, which, of course, are fixed on working surface table.
For the convenience of working with large quantity blanks, it is necessary to make pressure plates. For this purpose, you use sheet metal as it is also called a metal profile, which must be equipped with devices that allow them to be rigidly fixed on the desktop. This may be a bolted or other connection, at the same time one of the plates is placed under the surface of the table (lateral expansion), and the other above the surface of the workpieces. Compression is carried out by tightening the bolted, in other words, screw connection using nuts or shanks.
- Produced by miter saw.
When the work on the manufacture of the frame is not additional elements completed, it is necessary to install the frame on the prepared surface not to be rigidly fixed there. After that, install miter saw not manufactured additional elements. - Functionality check.
As a result of the installation of the saw and other elements that facilitate the work on this type of cutting tool, it is necessary to check its performance.
If to check the saw it is enough just to turn it on electrical network, then to check the convenience of performing work on the manufactured table, it is necessary to perform certain work, the trimming of prepared blanks. Here you need to check that:
- The geometric dimensions of the table allow you to perform the entire set of operations that are supposed to be performed on this equipment;
- Table not a miter saw rigidly fixed along the floor as it is also called a different plane;
- The size of the extensions corresponds to the size of the blanks, they move easily and are not fixed;
- Setting the stops on the pressure plates is not hindered by any irregularities on the working surface tables are not frame elements.
The support table for the miter saw is a structural element that allows you to work with high performance labor, ensuring the safe performance of processing operations various types materials.
A tool designed to cut all kinds of materials and surfaces at a certain angle is called a miter saw. It is used in the processing of wood, tiles, plastic, as well as metal and many other building products.
When working with such a heavy tool, construction tasks can be greatly facilitated by using a special table for a miter saw. In production, you simply cannot do without it, but at home, for example, in a garage or workshop, you can make such a table with my own hands if you use blueprints. This tool will serve as the basis for placing the saw and will facilitate the processing and cutting of materials.
Description of the manufactured product
The trimming table is a horizontal base, on the surface of which the cutting element is placed and fixed. This design is usually made of a metal profile, durable plastic and strong wooden planks. Together, these materials provide a strong, stable position for the cutting element and ease of use of the saw, especially when processing long materials.
Based on the length of the pipes or boards that you plan to cut, the table must be made to a certain size. Therefore, for a comfortable cut, such a tool is often made sliding, however, you can stop at a permanent model.
The table can be stationary or, when installing additional wheels, portable, but in any case, the surface must stand firmly on the floor and not move during processing.
Preparing to make a table
Various types of such tables can be found in construction stores, from the cheapest to the largest professional, however, there are situations when it is not possible to purchase this product. It is in such cases that one should make homemade workbench for such a tool.
First of all, in the process of making a table, you need to consider several important points:
- choice of convenient free space to set up the table;
- obligatory installation of fasteners for stationary placement of the tool;
- dimensions of processed materials for their successful placement;
- type and dimensions of the miter saw itself, which will be installed on the table.
The next step will be the analysis and implementation of the above points, since the successful manufacture of the table directly depends on this. After studying the instructions for assembling the table, preparing the drawings, as well as the necessary building materials you can safely begin the main part of the whole work.
We assemble the table with our own hands
The assembly of a tool can be conditionally divided into work with several of its parts. Its main components include the frame, side extensions, side stops, pressure plates and the base-platform for the saw.
Let's look at each part in order of importance.
frame
The frame of the product is best made from a metal profile (aluminum or steel), and its cross section is usually chosen from the existing assortment in the store. The dimensions of the frame, as fundamental for the table, are determined by the free space around, the dimensions of the cutting element and the type of product (non-movable or mobile).
In accordance with the dimensions of the saw you are considering, the level of the bottom line of the potential cut and the possibility of changing the position of the saw on the frame are set aside in the frame structure.
Side extensions
In the course of interaction with especially dimensional materials in the table, the installation of side extensions made of metal, a durable plastic sheet or wood is provided. At the end of the treatment, thanks to their design, they are lowered to the sides of the machine.
You can make a model not with retractable, but retractable extensions, for example, on a shelf inside the table.
Side stops
To facilitate the milling process, parallel side stops are fixed on a homemade table.
Often they are made of boards and plastic, but we recommend using them as stops. metal corners with clamping elements.
With their help, the corners are fixed on the working trimming table.
Pressure plates
A metal profile is chosen as the pressure plates on the table and equipped with a device for rigid fixation with the surface. The plates are installed as follows: one element is placed under the work surface, and the second - above it. Next dragged on bolted connection, tightly compressing the materials together.
Saw assembly
After Assembly metal frame and assembling the extensions, stops and pressure plates, you can proceed to the final stage. Installation of a miter saw consists in placing it on a platform base and fastening the parts with screws.
Reliability check
The final step is to check the integrity and overall reliability of the trimming table.
Make sure that the bed is stationary, the roller stand, if any, and any other rotary mechanism work correctly, and the saw, when connected to the network, does not have difficulty in sawing.
The overall reliability of the table is evaluated by a trial run.
Additional safety precautions
Pay attention to the following points.
- When making a table with your own hands, choose only high-quality materials.
- Keeping the workplace and the space around you in order reduces the possibility of injury of various kinds.
- It is necessary to periodically check the table for imbalance and its elimination. It is also important to check the fixation of the saw before starting work.
- Do not place your hands close to the cutting blade while processing workpieces.
- Wear safety goggles to avoid getting chips in your eyes.
A table for a miter saw is a device that serves as the basis for installing this type of saw, facilitating the performance of work on the face processing of various types of materials both in a strictly vertical plane and at the required angle.
The worktable for installing a miter saw is a solid base on which this cutting tool, a miter saw, is mounted. Such a design can be made of a metal profile of various sections and different metals, as well as durable types of plastic. Additional elements (side extensions, guide shelves and stops) can be made from lumber (board, plywood, chipboard or OSB board).
The dimensions of the table depend on the geometric dimensions of the material being cut (lumber, metal profile, tubes or fittings). The design can be fixed or sliding, allowing you to change the surface area of the table, which also depends on the material being processed and the conditions of work.
The table, depending on the nature of the work performed, can be made of stationary or portable installation, with legs or providing for installation on a flat horizontal surface located above the floor level.
DIY miter saw table
A support table that can be used to trim various materials by attaching a miter saw can be purchased at construction tool stores, where a wide range of such products is available. But sometimes there are cases when it is not possible to buy what exactly is needed for the process of performing work, then the question arises, how to do it yourself.
Initially, you need to answer several questions, on which the parameters of the product under construction and the material to be used depend, these are:
- Where will it be installed.
- How will it be fixed to the floor or other surface.
- What material and what geometric dimensions to be processed.
- What type, method of fastening and geometric dimensions of the miter saw, which is to be installed on the table being made.
Preparatory stage
During this period, you should answer for yourself the questions that were described above, and then draw a sketch of the product under construction.
Prepare construction tool and the required materials, and then proceed to work.
Performing work on the manufacture of the table
The frame can be made from a metal profile of various sections available. The geometric dimensions of the frame depend on the available area where the equipment will be mounted, the dimensions of the miter saw and the type of installation (stationary or portable).
On the frame, it is necessary to provide for the installation site of the saw, which must correspond to the available one (geometric dimensions, the height of the lower mark of a possible cut, the possibility of changing the spatial arrangement).
Regardless of the size and shape of the frame, it is necessary to provide side extensions of the table, which can be made of durable plastic, sheet metal or plywood. The presence of lateral extensions of the working surface will facilitate sawing of long-sized workpieces. If the side extensions are located below the level of the surface of the miter saw, then it is necessary to provide for the installation of special shelves along which the workpieces will move.
Side stops will also be useful, thanks to which, after fixing them, you can trim a large number of blanks according to the set size. As stops, you can use corners made of various types of metal, equipped with clamping elements, by means of which the stops are fixed on the working surface, as well as other elements (lugs, bars, etc.) made of wood or plastic that can be fixed on the working surface of the table .
For the convenience of performing work with a large number of workpieces, it is necessary to make pressure plates. To do this, you can use sheet metal or a metal profile, which must be equipped with devices that allow them to be rigidly fixed on the desktop. This can be a bolted or other connection, with one of the plates placed under the surface of the table (lateral expansion), and the second above the surface of the workpieces. Compression is carried out by tightening a bolted or screwed connection using nuts or shanks.
- Mounting a miter saw.
When the work on the manufacture of the frame and additional elements is completed, it is necessary to install the frame on the prepared surface and firmly fix it there. After that, install the miter saw and manufactured additional elements. - Functionality check.
After completing the installation of the saw and other elements that facilitate work on this view cutting tool, you need to check its performance.
If to check the saw it is enough just to turn it on to the electrical network, then to check the convenience of doing work on the manufactured table, it is necessary to perform certain work, trimming the prepared workpieces. In doing so, you need to check that:
- The geometric dimensions of the table allow you to perform all types of operations that are supposed to be performed on this equipment;
- The table and the miter saw are rigidly fixed to the floor surface or other plane;
- The size of the extensions corresponds to the size of the workpieces, they are easy to move and fix;
- Setting stops and pressure plates is not hindered by any irregularities on the working surface of the table and frame elements.
The support table for the miter saw is a design element that allows you to work with high labor productivity, ensuring the safe execution of operations for processing various types of materials.
- Overall dimensions, mm: width - 1222 (3073 with extensions fully extended); depth - 508; height - 165.
- Weight about 26 kg.
- Necessary materials: one sheet of plywood 19 x 1220 x 2440 mm; one maple board 19x140x2440 mm; four galvanized pipes 3/4 inch x 1085 mm.
- Quick assembly with screws and glue.
First make the panels for the platform
1. Cut the top and bottom panels according to the dimensions indicated in the "List of Materials" BUT. Mark the centers of the four flange nut counterbore holes on the underside of the top panel (Fig. 1 and 2). Make counterbores and drill holes, then insert M6 flange nuts.
Using a combination square, measure the height of the miter saw table on a level surface.
2. To determine the width of the side support-handles B, measure the height of the miter saw table (photo A). In our case, this size
equal to 90 mm. Then cut out the handles specified length and give them the width according to the measurements.
3. To make 25 x 190 mm slots in the handle supports, mark the centers of the 25 mm holes (Fig. 1). Use a Forstner drill to make holes, placing a piece of scrap underneath to prevent chipping. Finish the slots by sawing the excess material between the holes with a jigsaw. Then mill 6mm roundings around the edges of the slots on both sides.
4. Glue the side handles AT to the top side of the top panel A (Fig. 2). Drill holes and screw in screws.
After bending business cards around both ends of the pipe, press the middle guide rail C and screw it to panel A.
5. Cut out the pipe guides With. Glue two of them to the top side of the bottom panel BUT, aligning the edges (Fig. 1), fix with clamps, drill mounting holes and screw in screws. Prepare 1085mm lengths of 1085mm lengths of 3/4" tubing (for extensions) to mount the middle and inner rails. Using pipes and spacers made of thin cardboard (business cards will do), position and install the middle guides (photo B) and do the same for mounting the inner rails. The spacers will provide the clearance necessary for the pipes to slide freely between the guides.
6. Apply glue to the top side of the tube guides With and clamp the top panel A/B to the bottom A/C aligning their edges.
Add extension supports
1. For extension supports D saw out four blanks measuring 152 x 508 mm. To determine their final width, place a miter saw on the top panel BUT. Lay the long straight board rule on the saw table and support handles AT so that its ends extend beyond the edges of the platform. Measure the distance from the rule to bottom side bottom panel. Sawing blank supports D to this width and save the trimmings.
2. For marking on extension supports D centers of holes into which the ends of the pipes are inserted (Fig. 1), mark on one end of the bottom panel BUT centers of openings between pipe guides With. Draw center lines for the outer opening at the front and for the inner opening at the back.
Align the ends of the support D with the bottom panel A and transfer the center marks of the pipe openings.
Rotate the support 90°. Mark on its end the position of the underside of the top panel A.
Now, pressing the extension support D edge towards the bottom panel, extend the indicated center lines of the openings (photo C). Turn the support over to press it against both panels and the rule, and mark the position of the bottom of the top panel on it with a line (photo D). This line defines the top edge of the pipe holes so that the top of the supports is flush with the table top of the miter saw. Using a square, mark the crosshairs by drawing lines from the marks made on the support. Transfer these labels and draw lines on the remaining extension supports.
Align the Forstner bit with the marking lines on the support D. Drill holes with a diameter of 25 mm in the outer supports and 28 mm in the internal supports.
3. In the two outer supports of the extensions D use a Forstner drill to mark a hole with a diameter of 25 mm (photo E). Mark these parts as external. Insert a 28 mm drill into the chuck and set the stop so that the cutting rim of the drill aligns with the top line of the holes. Make holes in the two remaining supports. ( Large holes allow the extension supports to easily slide over the pipes.) Please note: the distance between the centers of the holes must be the same on all supports. When installing supports on pipes on both sides of the platform (Fig. 1) you will need to deploy the ends of one pair of supports.
By drilling mounting holes through the edges of the two outer supports D and through steel pipes, screw in the screws.
4. Mill 6 mm roundings on the edges of the holes of the internal supports D (Fig. 1). Check how the pipes are inserted into the holes of the external supports. With a round file or sanding head for an electric drill, expand the holes if you want the ends of the pipes to fit snugly into them. To save right position do not touch the supports with a file or sandpaper the top edge of the holes. Insert the pipes, align their ends flush with outside external supports, drill mounting holes for fixing the pipes and screw in the screws (Fig. 2, photoF).
5. Cut out the flaps E and drill 8mm holes in them (Fig. 1).
6. For attaching the flaps to the outer supports of the extensions D mark the center on inside each stop (Fig. 2). Pay attention to the different position of the holes in the right and left stops - they should be located at the front side of the platform table. Having made counterbores and drilled holes, insert M6 flange nuts into them.
Completion
1. Cut out the rails F for mounting the structure on sawhorses. Glue them on the bottom along the edges of the bottom panel BUT, leaving a distance between them corresponding to the thickness of the upper bar of the saw goat (Fig. 1).
2. Sand all parts with #180 sandpaper and soften all sharp corners and ribs. Remove sanding dust. If desired, apply a colorless weatherproof coat. (We used two coats of oil varnish.)
3. Attach the flaps E on external extension supports D screws M6 x 38 with handwheel, adding washers (Fig. 1). Use a marker with indelible ink to put a mark on the top of each pipe, departing from the end of 75 mm, indicating the maximum extension distance. Now put on the inner supports D on pipes (Fig. 1). Insert the pipes into the appropriate platform openings and secure them with the same handwheel screws, remembering to add washers.
4. Finally, place the platform table on the sawhorses and place the miter saw in the middle. Drill the mounting holes and secure the machine with suitable fasteners. Start new projects, because now you can cut boards conveniently and safely.
