Drilling horizontal holes with diamond drilling machines. Drilling holes in concrete structures. Diamond drilling rig to buy or not, what is the price

The Burolmaz company provides services for diamond drilling holes in concrete low prices in Moscow and the region, for construction works. Large companies cooperate with us construction firms and small teams involved in the repair of apartments and houses, because we have:

• favorable price for customers;
• modern industrial equipment;
• quality service tailored to the wishes of customers.

By choosing our company, you save time and get favorable conditions for cooperation.

concrete drilling technology

Punching technology through holes in concrete is based on the use special installations. The main elements of such an installation are a frame, a cooling system and a crown, which is driven by an electric motor. The crown is a cylindrical pipe, on the working end of which hard-alloy cutting teeth coated with technical diamonds are soldered.

Rotating at high speed, the crown bites into the rock. Water is constantly supplied to the working surface, which cools the drilling machine and prevents the formation of dust. The longitudinal feed of the machine is provided by the operator of the drilling rig. As a result of drilling, a cylindrical core is cut out in concrete, which is then removed.

The diamond tool has undeniable advantages:

Work accuracy
equipment adjustments allow you to set the center of the hole with an accuracy of 1-2 mm;

Smooth edges
the resulting openings have a smooth inner surface that does not require further processing;

Minimum noise
work can be performed in residential buildings and at facilities put into operation;

Free of dust and dirt
the equipment works without creating dust, we will ensure cleanliness at the facility and remove construction waste.

Gentle and accurate drilling process

Percussion instruments are subjected to building construction heavy loads and severe vibrations.

Crowns accurately drill a given area in concrete walls no dust or damage. With their help, you can make holes without affecting the load-bearing elements.

Areas of use

Diamond drilling rigs are advisable to use during capital construction or repair facilities. With their help, you can quickly and accurately make a through opening in a wall or ceiling, create an arch or niche, and remove excess material.

Quickly create openings in concrete for:

Plumbing, heating, sewerage

technology diamond drilling allows you to drill holes in walls and ceilings made of concrete, under the pipelines of water supply, heating and sewerage systems. The high speed of obtaining openings significantly reduces the time required for the installation of communications.

Wires of the power supply system

concrete drilling equipment used for cable laying electrical networks through walls and ceilings. The machine can drill holes in concrete at any angle to the surface, which allows you to lay electric wires in an optimal way.

Channels for cables of information networks

using concrete drilling equipment, installation of cable channels and pulling cables for the Internet or TV are carried out in as soon as possible. Drilling rigs operate accurately (without shocks and vibrations), which makes it possible to perform cable installation work not only in new buildings, but also in buildings put into operation.

Air conditioning and ventilation ducts

the diameter of the cutting crowns for diamond drilling reaches 500 millimeters. Crowns big size Ideal for drilling holes for ventilation ducts and air ducts of high-performance air conditioning systems.

Drilling holes of large diameter or depth

Our machines can drill concrete structures not only perpendicular to partitions and ceilings, but also at any angle other than 90º.

The speed of movement of the crown is from 2 to 6 centimeters per minute. On average, through vents in ceilings and walls of standard thickness are made in 15-20 minutes. High performance and affordable prices, main factor during construction work.

Our equipment allows you to make openings large diameter up to 500 mm. The depth of the opening can reach 10 m.

Concrete drilling rates at "Burolmaz"

The cost of drilling holes in concrete with a diamond crown is calculated individually for each order. The labor intensity and properties of materials, as well as the diameter of the holes and the thickness of the ceilings, are taken into account.

Diamond drilling rigs are designed for drilling holes in walls made of high-strength materials, marble, hard natural stone or reinforced concrete with a high degree of reinforcement. Drilling machines allow drilling not only on flat, but also on relief surfaces, at almost any angle. For cooling working surface crowns and processed material is used water.

Diamond drilling is characterized by a very low level of dynamic loads and vibration. Due to this, the structure of the material in which drilling is performed is not disturbed, and at the time of completion of the process, it is not damaged. exterior finish walls. After drilling, no extra cracks form in the wall, and the drilled core remains inside the crown and does not fall out into the street with the risk of falling into the hood of someone's car.

It takes 10-15 minutes to mount the drilling rig. The machine is fixed with anchor fasteners, or with the help of a vacuum plate, if it is not possible to use anchors. The material can be anything: brick, concrete or marble. A large number of reinforcement in the composition of reinforced concrete will not be able to interfere with drilling and will not affect the quality of the finished hole, but will only affect the total operating time. You can find out the cost of services on the page "Prices for diamond drilling".

The principle of diamond drilling, video

Areas of use:

• holes in the walls for installing split systems
• openings for heating, water supply, sewerage risers
• air ducts, vents for natural ventilation premises
• alternative way making openings in walls
• alternative dismantling method reinforced concrete structures

Technology advantages:

• high drilling speed
• high accuracy positioning
• low tool wear
• low energy and resource costs
• no damage to exterior walls
• no surface post-treatment required
• the core remains inside the bit, no debris
• minimum noise, dust and vibration

Dry diamond drilling

It is used where it is not possible to use water for cooling, for example, where there is a risk of flooding the lower floor, in rooms where Finishing work, next to the power grid. To collect dust, an industrial vacuum cleaner is connected to the drilling machine. With dry drilling, the speed of work is lower, and the wear of the cutting tool is higher, so the cost of work is higher.

Dry drilling, video:

Deep diamond drilling

Drilling machines allow you to drill holes up to several meters deep. First, a hole is drilled to the depth of the crown, the core is knocked out. Then a crown with an extension is installed, the core is knocked out again, another extension is installed. And so on, until the desired depth is reached.

Angle drilling

Holes can be drilled not only perpendicular to the surface, but also at an angle to it. In this case, the diamond crown wears out more, and the speed of work is lower, so the cost of such drilling is usually higher.

Angle drilling video

Hole drilling

Often in force various reasons it is impossible to make an opening with help diamond cutting, for example:

• limited space
• low power electrical network at the facility
• lack of running water
• gouges from a large disc can change bearing capacity reinforced concrete structures
• large material thickness, with small opening sizes

In such cases, you can drill an opening around the perimeter with a diamond core bit.

diamond drilling price

1 The minimum cost of drilling 1-2 holes is 6500 rubles. without taking into account the delivery of equipment (depends on the remoteness of the object).
2 For drilling walls with a thickness of 50-80 cm or more, a multiplying factor of 1.3 is applied.
3 Drilling at a height above 2.5 m. or in cramped conditions, an increased factor of 1.3 is applied

Diamond drilling in concrete is one of the most effective ways and sometimes the only one. With it, through and blind holes are made in concrete, brick and iron concrete structures. It can also be used to process marble, granite and steel structures.

Making holes in the walls will come out in other ways, for example, with a drill and a puncher. But the first is only suitable for creating small holes, and the second may not be used in all cases. The puncher emits a strong vibration, and it is impossible to carry out such work in residential premises. The drill bit will quickly become dull in concrete when drilling deep holes, and the jackhammer will not be able to pierce the reinforcing bars. That's why best method considered diamond drilling. It is able to cope with any building material.

Positive traits:

• Possibility of drilling at an angle up to 45° and in hard-to-reach places.
• High speed.
• Obtaining precise and smooth holes in concrete that do not require additional processing.
• Absence of vibrations, which eliminates the possibility of cracks in concrete or other structures.
• Low level of emitted noise, thanks to which work can be carried out in residential buildings.
• Drilling is possible in both horizontal and vertical bases.
• A network with a voltage of 220 V is sufficient (not for all types).
• No dust (only for those cases where water is used).
• Ability to drill reinforced concrete structures.

To negative sides include expensive equipment for diamond drilling. Only an experienced person should use this tool. It also requires frequent replacement of consumables. If water is used during drilling and no drainage system is installed, then all the dirt will flow along the walls and floor. For collection it is necessary to use an industrial vacuum cleaner.

Drilling is carried out with a device consisting of a base, rack, engine (electric, gasoline) and. Precise and even drilling is achieved thanks to the teeth on the crown, made of industrial diamond crystals. It equally easily drills both concrete and granite, and even more so gas and foam concrete or brick.

Stages of work:

• The area where it is necessary to drill concrete is being studied, or rather, the location is calculated electrical wiring and sewer systems.
• Determine the location and select the diameter diamond crown.
• The frame and equipment are being installed.
• All tools are checked for play and fixation.
• Connects to the water supply system.
• A launch is made, and concrete drilling is started.

When might it be needed?

Technology diamond drilling carried out in the following cases:

• Creation of openings for ventilation, sewage, and air conditioning.
• Installation of pipelines for water and gas.
• Installation of electrical wiring, fire protection system.
• Drilling for chemical anchors, sockets.

Average cost of work

The price of diamond drilling in concrete mainly depends on the diameter, number of holes and their depth. Other factors are also taken into account, such as the diameter of the drill. How bigger size a crown is required, the higher the price. Price for 1 cm drilling depth brick wall about 30 rubles less than concrete.

The highest rates for drilling holes custom sizes. In this case, several crowns with different diameters are selected and drilled in more than one stage. If not consumable right size, you will have to order it and pay all its cost. Drilling structures with hydraulic equipment is even more expensive.

Before ordering such services, you should know what else can affect the cost of diamond drilling:

• drilling at height or in hard-to-reach places;
• creating holes at an angle;
• bad weather conditions.

Prices also increase if there is no source of water supply or electricity nearby.

The lowest prices are set for drilling holes for evaporator pipes - about 15 rubles per 1 cm or 1500 rubles per linear meter.

If drilling holes in concrete is carried out without the use of water in a residential area, then the entire room and furniture must be covered plastic wrap. So it will be much easier and faster to remove all the dust.

Another advantage of diamond drilling compared to conventional methods is that holes are obtained exactly in size and with even walls. This method is especially relevant when it is necessary to prepare a place for the installation of equipment (machines, supports, etc.).

Hole cutting

If you need to make long strobes, openings for doors and windows, or expand old ones, remove defects, beams, diamond cutting is used. In this case, drilling takes place not with the help of a crown, but with a disk or a rope, hence the name - disk wall saws and wire rope machines, as well as joint cutters. Just like drilling machines, this technique does not create vibrations. It can also be used in the repair of residential buildings, the likelihood of cracks in walls made of concrete or other materials is completely excluded. The cut after diamond sawing is absolutely even and smooth, no additional processing of the edges is needed.

Depending on the power and purpose, the technique has different sizes. There is a convenient compact, large equipment is not used in residential buildings, but only in the construction or repair of non-residential. Manage diamond cutting either manually or automatically. The second option provides complete safety for people, since no one is near the machine during operation. Hand saws are light in weight, so they can be easily operated by one person.

Joint cutters are used to create holes and strobes for laying various communications. No rail installation is required, which greatly simplifies the entire process and cutting time. Manually operated floor saws are only capable of cutting shallow depths, so there is no need to connect water to them. Automatic, on the contrary, make cuts larger than 12 cm, and necessarily require the supply of water for cooling. The second option is considered the best, since dust is not emitted during operation.

Manual diamond cutting devices make holes in weakly reinforced materials, for example, cellular concrete and bricks. For reinforced concrete structures, wall saws are used, and the degree of reinforcement of the structure does not matter. diamond disc will cut through any base.

cutting brick construction will cost an average of 6,000 rubles per m2, monolithic reinforced concrete - from 10,000, cutting a reinforced opening - from 36,000. Wall chasing for electrical wiring also depends on the material: in brick - from 250, concrete - from 350, reinforced concrete - from 400 rubles per running meter.

Diamond drilling machine - one of the most durable and reliable diamond tools for core drilling of perfectly even holes and technological shafts in structures made of concrete and reinforced concrete, stone, brick, foam concrete and expanded clay concrete, such as: walls, floors, ceilings, foundations, runways, etc.

Diamond setting most widely used in the following industries: for laying pipes for water supply, heating, sewerage and other engineering communications; when arranging cables, ventilation systems, air conditioners and extracts; for cutting openings in reinforced concrete, etc. In addition, buy diamond drilling rig reasonable for use when drilling cores in asphalt as well as hard rocks in mines or in mines. Reconstruction of buildings, industrial dismantling, installation of chemical anchors, sampling of building materials for laboratory analysis - it is the machine that is used in all these processes. diamond drilling holes in concrete, which allows you to perform the work as quickly, efficiently and safely as possible.

Diamond drilling rig buy or not, what is the price?

Solving the question: Installation of a diamond drilling to buy or not? The answer is obvious - the machine diamond drilling makes holes in concrete different diameter and depths in concrete, reinforced concrete and other hardest materials; during operation, it does not create strong vibration, which greatly simplifies the process of work, reduces the noise level, does not damage or chip the material being processed; there is no dust cloud. Diamond drilling rigs absolutely safe for the environment and human health, so they can be successfully used in residential areas. If you want all the resulting holes to be completely smooth, clean and do not need any additional processing at all, you must buy it! Price diamond drilling rigs may vary greatly depending on the brand, country of manufacture and specifications.

The design of the diamond drilling machine:

The diamond drilling rig is powerful and heavy professional tool for drilling deep holes of medium and large diameter in high-strength materials, which consists of an engine, a rack and a set of additional equipment and tools (crowns, extensions, etc.). Usually a diamond drilling machine has in its design a mechanism for supplying water, which cools the segments and the crowns themselves, prolonging their service life. The diamond drilling rig can support both dry and wet type of drilling. A professional diamond drilling rig allows you to drill regardless of whether there is reinforcement in concrete or not. The difference in performance is only that with a large presence of reinforcement, the process will proceed somewhat more slowly, but the result will still be achieved.

The dismantling of reinforced concrete structures is not an easy task, any builder who has encountered this will tell you about it. In order to simplify the task, we use drilling machines for diamond drilling and drilling.

Diamond is one of the most durable minerals in nature, which is distinguished by its hardness and reliability. The diamond drilling rig, in turn, is the embodiment of the reliability of the diamond itself, which is supported by innovative developments and modern technologies.

Why is a diamond drilling rig better than other similar technologies

Diamond drilling is a material processing process that allows you to create holes in various building materials such as concrete, clay (brick), granite, a natural stone by using diamond tools (diamond crowns).

The diamond drilling rig is technical device, carrying out drilling, drilling due to an electric or hydraulic motor and bed.

Such devices allow drilling in:

• concrete and reinforced concrete walls
• foundations
• ceramic tiles

Benefits of a concrete diamond drilling machine

• The workflow is much faster.
• Drilling tool, no vibrating waves, lower noise level
• Chips on the processed material are not formed;
• No dust. No cracks appear
• Less traumatic work
• The ability to make a hole in a hard-to-reach place.

Types of diamond drilling rigs

There are two types of diamond drilling machines.

• Dry drilling - this type of installation is used when working with soft materials such as brick, limestone, thermoblock and aerated concrete.
• With water supply. In this case, water is supplied to cutting tool, cooling the crowns, thereby increasing the service life. This method is most often used for high-strength materials such as natural stone, concrete and reinforced concrete.

Where is the diamond drilling machine used?

As mentioned earlier, the diamond drilling rig is used in construction and repair work, for drilling various designs and surfaces. The working process is carried out due to the diamond crown of the device. The hole diameter can vary from 12 mm to 600 mm. From this follows a different scope, depending on the specific need for operating the installation. Very often, such a development is used in the process of laying communications (pipes, ventilation, electrical cable and etc.). Sometimes diamond drilling is used to take samples, for example, of rocks or monolithic structures.