Paper model of the T 34 tank diagram. How to make a paper tank instructions

Creating paper tanks can be of interest not only to boys, but also to girls. Firstly, these figures will be excellent toys for them. Secondly, the process of creating a figure itself arouses unprecedented interest in children and develops motor skills. And thirdly, during the process of forming such figures, many parents tell their children about the great wars and their features, attracting children to the history of their state. So, how to make a tank out of paper and where to find a layout and drawing?

Creating paper tanks can interest not only boys, but also girls

A paper T 34 tank corresponding to a real vehicle can be glued together using ready-made developments. To do this, you will first need to print the required scan on thick paper. Then you should cut out all the drawn parts.

To make T 34 from a reamer, you must follow the instructions:

1. Fold lines should be found on the cut out elements. A ruler is applied to each of them, and then the free edge of the paper is lifted and ironed. This creates an even fold.
2. Once all the folds have been marked, you can proceed to gluing the model.
3. The first step is to glue the main body of the tank. To do this, it is advisable to use a transparent acrylic glue or quick-drying PVA.
4. Then all minor parts are glued to the body.
5. Then you can move on to the cannon. First of all, its base is glued together, and only after that the cannon is supplemented with secondary elements. Finished model glued to the main body of the combat vehicle.
6. After this, the caterpillars are assembled. First, the inner circles are made, and only after that they are framed by a single track strip. The finished tracks are attached to the sides of the hull.

It is worth considering that there are different layouts of the T 34 tank, which may differ from each other color scheme and convention. If you can only print a black and white version of the machine, you should color it using acrylic paints. Such processing of cardboard will allow the future toy to acquire the appearance of a tank with a natural coating.

Gallery: paper tank (25 photos)

Tank IS 7 made of paper

To make this tank, you should also use a ready-made reamer.

1. All elements of the development are cut out using a stationery knife.
2. Next, using a ruler, folds are made at all places marked for these purposes.
3. In production supporting structure for the body. It is made from two rectangles installed parallel to each other and secured with 3 transverse strips located on equal distance from each other.
4. A body with a circle cut out in it is glued to the resulting base.
5. The sides of the body are glued, niches for the caterpillar are formed. A tank bottom is being formed.
6. The base for the cannon mount is being made. It is done in the same way as for the body. A manufactured turret is installed on the hull. A machine gun and additional elements are glued to the turret.
7. Next, the tracks are made: the middle ones are smooth, the rear ones are with teeth.
8. The tracks are glued to the bottom of the main body and secured with caterpillar tracks.

This model is quite complex to assemble, so when creating it with children, it is necessary to provide them with extensive assistance. When assembling it with children, you can dispense with several small parts, thereby simplifying the gluing process.

How to make a T 90 tank out of paper?

T 90 can be made using the origami technique. To do this, you only need paper: A4 sheet and a small sheet of paper for notes.

T 90 can be made using origami technique

How to do:

1. First, an A4 sheet is folded. First of all, it bends in half lengthwise.
2. The perpendicular sides of the sheet are folded, connecting to each other. First, the short side is applied to the lower long side, and then to the upper one. Similar manipulations should be performed on both sides of the sheet.
3. The leaf turns over. The corners of the short side are bent towards the ends of the crosses formed from the fold line.
4. The sheet is turned over and folded along the resulting lines, forming the basic shape of a double triangle.
5. The long sides are folded towards the middle so that the resulting double triangles are on top of them. The result is a double arrow.
6. The edges that have just been folded are folded towards external parties rectangle.
7. The lateral corners of one of the triangles are bent towards the apex.
8. The workpiece is turned over and conditionally divided into 3 parts so that in the end the top of the folded triangle touches the middle of the base of the open one.
9. The free corners of the triangle bend inward.
10. The “ears” from the previously folded triangle are set into the resulting pockets.
11. The result is a tower.
12. A small sheet of paper is rolled into a cylindrical shape using a knitting needle or skewer.
13. The barrel is inserted into the hole in the turret and glued.

The figurine assembled in this way can be decorated using thick paints, felt-tip pens or pencils.

How to make a tank from origami modules?

To create tanks, you can use the assembly diagram offered by modular origami. To begin, the assembler will need to prepare 1688 triangular modules.

How to assemble:

1. First of all, the tower is assembled. Her first and second rows close in a circle. Each row consists of 30 modules.
2. The workpiece is turned inside out and supplemented with a third layer consisting of a similar number of elements. In this way, the tower is built up to layer 8.
3. The ninth row is assembled from 30 modules, but they should be installed backwards.
4. Next you need to start working on the tracks. A chain of 4 rows is made, each of which has 50 modules.
5. The fifth row uses 46 elements. The reduction should be carried out in places where the track bends.
6. Row 7 consists of 46 elements installed backwards.
7. The same scheme is used to create the second caterpillar.
8. For each caterpillar, 3 wheels are made. To do this, a circle is made of 2 rows, each of which involves 10 modules. The figure is turned inside out and completed with 5 rows.
9. The wheels are placed inside the caterpillar. These elements are connected by a middle bar made of 34 rows: 1 – 5 modules, 2 – 4 elements. Next, the rows alternate.
10. A slightly bent piece is inserted between the tracks.
11. A tower is placed on top.
12. The cannon is made of 20 rows, the width of which alternates: 1st row - 2 elements, 2nd row - 1. The last three rows increase to 4, 3 and 4 elements.
13. The machine gun is inserted into the turret.

Hello to all glue lovers! Today we offer make a paper model the legendary tank of the Soviet army from the Second World War - T-34. Do T-34 tank made of paper will not be more difficult than the previously published tank models: “”, “”.

The T-34 tank, thanks to the high combat and technical specifications, was adopted by the Red Army at the end of 1939. In the spring of 1940, as one of the tests, a run of two prototypes T-34 tank from Kharkov to Moscow and back. During the trip, the tank confirmed its high technical qualities. After this test, a decision was made to produce the T-34 at the main large enterprises of the USSR.

Gluing a T-34 tank from paper

To create a paper model of a tank, you will need to print out diagrams of the tank parts, cut them out and glue them together.

• Any printer is suitable for printing circuits, because... The black and white parts of the tank can easily be painted.
• Use thin cardboard or photo paper to print large tank parts.
• For small details, you can use regular office paper.
• To create even curves, place a ruler along the bend line and draw along it with the back of a pair of scissors or a non-writing pen.
• To cut out the tank part, use scissors and a utility knife.
• It is advisable to cut and glue the parts sequentially, moving from one glued part to the next.
• If the part has an inner circle, then it should be cut out first, and then the part itself.
• To glue the tank parts, use transparent acrylic glue “Moment” or any other analogue.
• Before gluing, you should paint over the ends of the part, this will improve the appearance of the model.
• Follow the instructions when gluing the tank.

Paper diagrams of T-34 tank parts

Instructions for gluing the T-34 tank

Tankers!

In honor of the 70th anniversary of the Victory, we invite you to glue together a paper model of the IS-2 tank from the 7th Guards Tank Brigade. This is one of the most famous Soviet tanks in defeated Berlin. The coloring of the Berlin cars (white stripes on the towers) is widely known from numerous photographs. The IS-2 tank, modified in 1944, with a “straightened nose” became the personification of the power of the Red Army and was actively used at the final stage of the war.

It is this type of machine that is represented among the unique premium equipment.

The paper model of the IS-2 model of 1944 in the “Tank Model” version fully corresponds to its “Berlin” counterpart. In addition to the original coloring, the “Armored Box” brochure contains a camouflage version of the tank.

The model from the “Armored Box” series is assembled easily and quickly - in just a couple of evenings. The model from the “Tank Model” series accurately reproduces the appearance real car and is designed for a skilled modeler. The same brochure contains parts for assembling a very colorful diorama “Berlin. 1945”, reproducing the atmosphere of the festive “victorious” Hangar.

To recreate appearance textures and camouflage from World of Tanks, archival drawings and photographs were used for the armored vehicle. Parts from both brochures can be combined to suit your needs.

Along with the paper model of the IS-2 tank, we suggest you glue together a model of the IS-2’s “comrade in arms” - the T-34-85 tank. This is the development of modeler Sergei Gorbenko based on the brochure “Tank Model” No. 013/1 (a new turret has been added). The model is given in two color options: tank No. 10 of the 36th Guards Tank Brigade and T-34-85 “Rudy” from the Berlin Troika.

In the “Modeling” section you will find something from the “Armored Box” series. Please note that for winning places, participants, in addition to premium equipment and premium account days, will receive special diplomas.

And interesting and educational will help beginners assemble the legendary IS-2.

Models from the “Tank Model” and “Armored Box” series are developed by specialists World of Papertanks.

IS-2
Soviet heavy tank VII level The IS-2 differs from its upgradeable counterpart from the Soviet development tree in the so-called straightened frontal armor increased efficiency. It was this modification of the IS that became the personification of the power of the Red Army and was actively used at the final stage of the war. Powerful and easy to learn, the IS-2 is great choice for fans of heavy tanks and collectors.
	Package contents:

Paper model of the T-34 tank model 1940 and 1942(colloquial "thirty-four") - Soviet medium tank of the Great Patriotic War Patriotic War, mass-produced since 1940, was the main tank of the Red Army until the first half of 1944, when it was replaced by the T-34-85 modification tank. The most popular medium tank of World War II.

Materials and tools:

1. scissors, paper knife, drawing ruler;
2. tweezers;
3. brushes for glue and paint;
4. watercolor paints (or pencils), toothpicks;
5. transparent acrylic glue (“Moment”, etc.);
6. for printing the model, matte photo paper with a density of 170-180 g/m2; for small parts - 70-80 g/m2.

1. Before assembling the part, read the drawings and instructions. Determine the location of each part and imagine its assembly;
2. make holes in the parts before cutting out the part itself;
3. cut only the part(s) you need right now. Place unfinished parts in a box, and unused sheets in a closed folder (optional). When throwing away trash after work, carefully inspect the paper scraps;
4. For better bending of the part, it is necessary to draw it along the fold line under the ruler, pressing lightly, with the blunt side of a knife or a toothpick so as not to damage the surface of the paper. It is better to do this from the wrong side of the part;
5. keep your fingers clean and be sure to use napkins to wipe your hands, because your hands may get dirty during work;
6. wrap cylindrical parts around a round object before gluing suitable diameter, this will give them shape;
7. Before gluing it is necessary to paint over the ends of the part. White trim lines spoil general view models. To paint the ends, use watercolors or gouache paints. Having picked up desired color, apply them in a thin layer, then give the paint time to dry. It’s better to forget about felt-tip pens;
8. take your time with gluing. First, cut out the part, paint it from the end, wait for the paint to dry, and assemble the part. Place it where it needs to be to make sure everything is done correctly. And only then glue it. Don't forget to let the glue dry.

A little history

Soviet medium tank T-34 mod. 1940 and 1942

T-34 tank (photo)T-34 tank (photo)T-34 tank (photo)_1T-34 tank (photo)_1

On October 13, 1937, ABTU issued the plant technical requirements for the design of a new combat vehicle - the BT-20 wheeled-tracked tank. Two weeks later, the director of plant No. 183, Yu.E. Maksarev, received an order from the Main Directorate, which included the words: “By Government Decision No. 94ss of August 15, 1937, the Main Directorate was asked to design and manufacture prototypes and prepare production for serial production by 1939 high-speed wheeled-tracked tanks with synchronized movement."

To develop a new tank, ABTU sent captain E.A. Kulchitsky, military engineer 3rd rank A.Ya. Dik, engineers P.P. Vasiliev, V.G. Matyukhin, Vodopyanov, as well as 41 VAMM graduate students to Kharkov. In turn, the plant contributed several of its designers, including A.A. Morozov. A.Ya. Dik was appointed head of the design bureau, engineer P.N. Goryun was appointed assistant head, and E.A. Kulchitsky was appointed ABTU consultant. Information about the activities of this group that has so far been discovered ends at the beginning of November 1937. However, it is reliably known that the technical specifications for the BT-20 tank (factory index - A-20) were largely based on the developments of A.Ya. Dick, made in the summer of 1937.

The technical design of the tracked tank, designated A-32, was completed quickly, since outwardly it was no different from the A-20, with the exception of the chassis, which had 5 (not 4, like the A-20) road wheels per side. In August 1938, both projects were presented at a meeting of the Main Military Council of the Red Army under the People's Commissariat of Defense. The general opinion of the participants was again inclined in favor of the wheeled-tracked tank. And again Stalin’s position played a decisive role: he proposed to build and test both tanks and only after that make a final decision.

On September 23, 1939, a demonstration of tank equipment to the leadership of the Red Army took place, which was attended by K.E. Voroshilov, A.A. Zhdanov, A.I. Mikoyan, N.A. Voznesensky, D.G. Pavlov and others, as well as the main designers of the tanks being presented. In addition to the A-20 and A-32, they delivered heavy tanks KB, CM K and T-100, as well as light BT-7M and T-26.

The A-32 “performed” very impressively. Easily, even gracefully and at a good pace, the tank crossed a ditch, a scarp, a counter-scarp, a spear bridge, forded the river, climbed a slope with a rise of more than 30° and finally knocked down a large pine tree with the bow of the armored hull, causing the admiration of the spectators.

Based on the results of tests and demonstrations, the opinion was expressed that the A-32 tank, which had a reserve for increasing mass, would be advisable to protect with more powerful 45-mm armor, correspondingly increasing the strength of individual parts.

To the utmost short terms The design bureau refined the T-32 tank by further enhancing armor protection, armament and implementing a number of other design changes. As a result of this work, a model of a tank was created, which received the name T-34 and later became the main tank of the Soviet Army during the Great Patriotic War. The chief designer of the joint design bureau developing the T-34 was M.I. Koshkin, head of the design bureau and deputy chief designer - A.A. Morozov, deputy head of the design bureau - N.A. Kucherenko.

The T-34 tank was adopted by government decree on December 19, 1939, before the production of prototypes. The first experimental tanks were manufactured in January 1940 and during testing they fully confirmed their high technical and combat qualities. In March 1940, two T-34 tanks made a run to Moscow and back, demonstrating high reliability of all components. M.I. took a direct part in this run. Koshkin. In June 1940, the government decided to expand the production of T-34 tanks at other large enterprises in the country. In connection with this, the design bureau of plant No. 183 urgently produced complete sets drawing and technical documentation of the T-34 tank and required quantities sent to the Stalingrad Tractor and Sormovo Shipbuilding Plants.

Today you can download free drawings of a paper model of the T-34 tank at the end of our article.

To assemble a paper model of a tank, you only need a paper cutter, paper and glue. Well, also a color printer for printing drawings of a paper model. Assembly of this paper model is quite simple, it just requires care when assembling small parts.

The T-34 tank played a decisive role in all major battles of the Red Army during the Great Patriotic War. Universal in its essence, it was successfully used both for direct support of infantry and for high-speed maneuverable combat operations.

During the Great Patriotic War, the T-34 became the basis of the Red Army tank fleet. The country's seven largest factories produced over 54,000 T-34 tanks - more than 70% of all types of tanks produced. The T-34 tank turned out to be in the best possible way adapted for mass production, was quite simple to manufacture, operate and repair, and had a relatively low cost. Important Feature"Thirty-four" - ease of mastering of a combat vehicle by its crew.

Nowadays, T-34 tanks stand on pedestals in cities and villages in many countries around the world and adorn the collections of the most prestigious military-historical and technical museums.

By the way, there is a very interesting film on plasticine animation about the Soviet T-34 tank.

This film about the T-34 tank tells the whole history of design modernization in an ironic form. I recommend watching!

Download free drawings of a paper model of the T-34 tank Can