The development of "Z144" is a project one-story house with a garage for two cars and the possibility of creating an attic floor.
The design of a one-story house will certainly attract the attention of adherents of the practicality of one-level interiors. Fully closed kitchen will hide the features of the owner’s life from the rest of the daytime area. The location of the kitchen on the courtyard side and the presence of an additional exit to the terrace near the kitchen is very convenient for organizing breakfast, lunch or dinner on fresh air without leaving home. Some covered part of the terrace will serve as an excellent place for summer holiday near the house. Sufficient glazing areas in the day area will guarantee excellent natural light in all rooms throughout the entire daylight hours and create an indescribable feeling of harmony with surrounding nature. A technical room located behind the garage for two cars is convenient for use and storage gardening tools and other equipment, and also contains laundry equipment. If necessary and desired by the owners, it can be reduced or increased in size. A direct transition from the house to the garage through a passing vestibule will make it easier to unpack and transfer purchases from the car. The pantry located in the kitchen is practical enough to store essential kitchen appliances and supplies. Spacious bathroom for maximum convenience connected to the laundry room. One of the two bedrooms has a small private bathroom and access to the terrace. At the request of the customer, it can be redesigned into a bathroom public use. The second, smaller bedroom also has access to the terrace, making it more comfortable, bright and modern. The presence of the possibility of arranging an attic will help increase the living space, and will also give the opportunity to conduct construction work gradually, whenever possible.
Foundation- prefabricated monolithic, strip (monolithic reinforced concrete base, FBS blocks).
Base- facing with porcelain tiles.
Exterior walls- blocks of cellular concrete B3.5 D600 with a thickness of 380-400mm. with plastered facades. (cellular concrete blocks can be replaced with any other building material, taking into account compliance with the thermal properties of external walls).
The material and thickness of the insulation depends on climatic conditions and wall materials (indicated in the project, taking into account your region).
Domestic load-bearing walls
- sand-lime brick M100
Partitions- blocks cellular concrete/ brick/ porous brick.
Interfloor ceilings- hollow reinforced concrete slabs.
Roof- pitched. The covering is at the discretion of the customer, the rafter structures are wooden.
Porch and balcony fencing- wooden.
Ladder - custom made according to the “metal stringers, wooden steps” scheme.
Protruding trim truss structures(cornices, wind board)- profiled sheet with polymer coating/ siding.
Composition of the A-144-2 project
General scheme set of speakers (AR+KR).
The final number of project sheets depends on the volume of the house and its features.
1.General information (Specification of wall materials, list of project sheets, description)
2.Plans (architectural/masonry)
3. Facades (with marks and “color spots” of the cladding)
5. Section(s) (according to characteristic parts of the building)
6. Foundation (Foundation strip diagram, order of wall blocks (even/odd rows for houses without a basement), reinforcement diagrams, specifications)
7. Statement, marking and specifications of jumpers.
8. Layout plan for floor slabs. (assemblies, specifications)
9.Roof plan.
10. Layout of truss structures with specifications.
11. Roofing units.
12. Ladder ( Hardware stairs, units, parts, specifications)
13.Options for floor designs
14. Other characteristic components and parts
General information
First floor plan. Cellar plan
Second floor plan
Plan Notes
Facade 1 - 3. Facade 3 - 1
Facade A - G. Facade G - A
Cut 1-1
Table of average design loads
Layout of foundation elements
Sections by foundations
Layout of floor elements at elevation. 0.000
Sections to the layout of floor elements
Monolithic sections UM-1, UM-2
Layout of floor elements at elevation. 2.480
Layout of floor elements at elevation. 5.300
Sections to the layout of floor elements
Reinforcing products
Ladder L1
Staircase L1. Details
Flight of stairs LM1
Stair railing OG1, OG2
Staircase L1. Details
Specification of elements for staircase L1
Ladder L2
Ladder LP1. Manhole covers KP1, KP2, KP3
Fastening units for ladder LP1 and manhole covers KP1, KP2, KP3
Entrance porch KR1
List and specification of jumpers
Wall scan along axis B with ventilation ducts
Layout of coating elements
Cuts 1-1, 2-2. Nodes 1, 2 of the layout of coating elements
Cut 3-3. Nodes 5, 6 of the layout of coating elements
Nodes 3, 4, 7 of the layout of coating elements
Roof units 1 - 5
Roof plan
Filling schemes window openings. Joinery Specification
Individual window OK-4
Individual window OK-3
Individual window OK-5 with louvered filling
Wardrobe Ш-1
Floor plans. Explication of floors
Interior finishing list
List of finishing of premises. Facade finishing sheet
First and second floor plans. Hot water option from gas heater
Basement plan. Hot water supply option from a solid fuel water heater
First and second floor plans. Hot water supply option from a solid fuel water heater
Cut 1-1. Option with basement
Floor plans. Explication of floors (option)
Layout diagrams of foundation elements (option)
Layout diagrams of basement wall elements (option)
Sections for foundations (option with basement)
Option for foundations on heaving soils
Layout of floor elements at elevation. 0.000 (option with basement)
Layout of floor elements above the basement. Sections
Layout of floor elements at elevation. 2.800 (optional)
Layout of floor elements at elevation. 5.300 (optional)
Units and parts for floor layout diagrams (option)
List and specification of jumpers (option)
Fencing of subscriber node OG-1 (approximate solution)
Furniture arrangement option
Facade options
List and specification of lintels (for façade option 1)
Porch KR-2 for facade option 1
Options for attached buildings, architectural elements and details (facades)
Blocking options
Variant of attached buildings, architectural elements and details. Schemes
Drawings of the main set of the VK brand
General information
Floor plans. Scheme B1, T3, T4, K1
Floor plans. Scheme B1, T3, T4, K1 (option with gas water heater HSV-20)
Floor plans (option with solid fuel boiler KS-TG-20V)
Scheme B1, T3, K1 (option with solid fuel boiler KS-TG-20V)
Equipment Specifications
Drawings of the main set of brand OV
General information
Floor plans
Floor plans (option with Universal-20 convectors)
Floor plans (option of a decentralized heating system from a small gaseous fuel boiler)
Floor plans (option of a decentralized heating system from a small-sized solid fuel boiler)
Heating system riser diagrams (radiator and convector options)
Heating system diagrams (option of a decentralized heating system from a small-sized gaseous fuel boiler)
Heating system diagrams (option of a decentralized heating system from a small-sized solid fuel boiler)
Subscriber node
Plan of the combustion chamber. Installation and wiring of a small-sized solid fuel boiler
Equipment Specification
Drawings of the main set of the GSV brand
General information
1st floor plan, gas pipeline diagram (basic version)
1st floor plan, gas pipeline diagram (option with a column)
2nd floor plan (option with column)
1st floor plan (solid fuel option)
1st floor plan (non-blocking option)
Equipment Specification
Drawings of the main set of brand E
General information
First floor. Second floor. Basement. Cellar. Location plans
Equipment Specification
Drawings of the main set of SS brand
General information
First floor plan, second floor plan with radio networks
Equipment Specification
104.0 m2 62.8 m2
Print the projectMirror image
- Total area
104.0 m2 - Construction area
130.0 m2 - Dimensions
10.0x13.0 m - Number of storeys
1 - Bathrooms and bathrooms
2 - Foundation type
prefabricated / monolithic strip - Exterior walls
foam blocks / aerated concrete + insulation - Floor type
floor slabs / wooden beams - Roof
metal tiles, flexible tiles, ondulin or others. I. Architectural (dramatic) design
The preliminary architectural design includes a set of drawings, which is necessary for coordination with the relevant government agencies.
- Explanatory note (information about the customer, construction site, technical and economic indicators of the object, information about the materials used);
- House floor plans;
- Basement or ground floor plan;
- Ground floor plan;
- Plan of the second (attic) floor.
- Color solutions for facades;
- cut;
- Roof plan;
- Foundation diagram (for reference).
Design solutions
Architectural and construction project, includes sections Architectural solutions And Design solutions, made on the basis accurate calculations, which allows for a significant reduction in construction time and cost. This is achieved through rational consumption of materials, without multiple stocks; modern engineering and design solutions.
1. Underground structures
- Foundation layout diagram (formwork; block layout diagram, etc.)
- Foundation reinforcement schemes.
- Sections, sections and developments along foundations.
- Parts and components of waterproofing and insulation.
- Specification of materials and products.
2. Structures of the above-ground part
- Detailed floor plans for walls and partitions. Knots, details.
- Jumpers: components, details. Product specifications.
- Prefabricated floor plans, monolithic floors. Units, parts, reinforcement schemes.
- Monolithic sections, beams, belts. Units, parts, reinforcement schemes.
- Columns. Units, parts, reinforcement schemes.
3. Roof and roof structures.
- Scheme rafter system. Sections, nodes, details for the rafter system diagram.
- Specification of rafter system elements.
- Roof plan. Sections, components, details for the roof plan.
- Specification of roofing elements.
Engineering communications
1. Water supply and sewerage (WW)
- Floor plans:
- Pipeline layout: cold and hot water supply; domestic sewerage;
- Arrangement of plumbing fixtures and auxiliary equipment;
- Axonometric diagrams of water supply and sewerage systems;
- Water metering unit diagram;
- Specification of materials and products: taps, pipelines, sleeves, manifolds, fasteners, etc.
2. Heating and ventilation (HV)
- General instructions for the project;
- HVAC system plans showing:
- Locations heating devices;
- Pipeline sections;
- Elements of the ventilation system;
- Scheme of “warm floor”, “warm walls”
- Calculated hydraulic diagram heating systems indicating installation settings of valves;
- Axonometric diagram of the ventilation system;
- Piping units for heating devices and other units;
- Specification of boiler, heating and ventilation equipment.
3. Power supply and electric lighting (ES)
- Schematic diagram of the power supply and group network of the switchboard;
- Electric lighting network plans;
- Outlet network plans;
- Distribution network plans;
- Potential equalization network plans;
- Power electrical equipment;
- Roof plans. Lightning protection;
- Specification of equipment and materials.
Floor plans
Characteristics
Constructions
Project KO-144
Architectural design is a standard kit project documentation required to approve the house design with the district administration and obtain permission to build a house on the allocated land plot
Full project home includes
A set of drawings on the basis of which the construction of a house is carried out. Contains detailed information about the technology and stages of building a house, from the foundation to the roof ridge. Consists of design drawings, assemblies and parts, statements and specifications of materials for purchase.
Includes sections: water supply and sewerage, heating and ventilation, electricity supply. Allows you to select at the design stage suitable characteristics engineering equipment and calculate effective schemes laying communications.
Additional changes in the project
Project preparation time
2-3 days.
Free delivery to the Republic of Belarus and the Russian Federation
What is included in a house project? What documents are needed to build a house?
Project documentation for the construction of a house consists of:
— Architectural project — section “Architectural solutions” (AR);
— Construction project — includes the section “ Design solutions"(KR);
— Sections engineering communications— Heating and ventilation (HV), water supply and sewerage (VK), electricity supply (ES).
The “Architectural Solutions” (AD) section is required for approval of the project in local executive bodies and development of the Development Project land plot, which includes the General Plan of the site. The section “Constructive solutions” is necessary directly for construction, because contains information about the technology of construction and design of foundations, walls, window and door lintels, floors, and roofs.
Are utility sections necessary for building a house?
Availability of engineering communications sections in addition to Construction project allows you to determine as accurately as possible before the start of construction the final cost of building a house without taking into account interior decoration. Of course, the standard layout of communications is not always suitable for clients who want to think through their own interior design. Therefore, even for ready-made projects from the catalog, sections of engineering communications are developed individually, based on the standard terms of reference. Moreover, the cost of such a project is lower than for individual project, due to reusability.
I need a gas project, can you develop it?
They are developing design documentation for gas supply to a residential building specialized organizations having the license and permits necessary for this type of activity. To select such an organization, in order to avoid future problems when approving the project, it is better to contact the administration of the construction area.
How to purchase a ready-made house project?
In order to buy the finished house project you like, you need to place an order (leave a request with contact information) on our website in any form convenient for you. The easiest option is to click the “Order a project” button to the right of the floor plans. In this case, you can also choose required sections project, and indicate the desired changes in the project. After this, a specialist from our company will contact you and clarify additional details. As a rule, we will need passport data to conclude an agreement and issue an invoice for payment. We will also need information about the owner of the site to complete the project. After payment you will be sent the ordered project documentation.
What changes can be made to the project?
It is possible to make any changes to finished projects. The cost of project changes depends on the volume of required adjustments and can be announced to you after their discussion. Minor changes, such as the location and size of window openings, installation of additional partitions or relocation of existing ones, can be made by the Developer independently during the construction process, without registering changes in the project.
What is the best thing to do: choose a project yourself on the website, or come to the office for a consultation?
All ready-made house designs that are available in present moment for ordering are presented on the website. If you visit our office to select a project, you will still have to select it from the catalog on the website. We do not store projects in printed form, because... Each project is designed individually in accordance with the developer's documents. Based on the practice of our clients, it is more convenient to take time and familiarize yourself with the catalog on the website in a relaxed home environment.
How quickly can I receive a house project after placing an order remotely?
If you plan to buy a ready-made project without changes, our specialists will prepare the project within 1-2 days and organize its delivery courier service to the door of your home anywhere in Belarus, Russia and neighboring countries.
The period for preparing a project with changes depends on the volume of required adjustments, and can take from 2 to 10 days.
