Foundation- prefabricated-monolithic, tape (Monolithic reinforced concrete sole, FBS blocks).
plinth- facing with ceramic granite tiles.
Exterior walls- blocks of cellular concrete B3.5 D600 with a thickness of 380-400mm. with plastered facades. (blocks of cellular concrete can be replaced with any other building material, taking into account the observance of the thermal properties of the outer walls).
The material and thickness of the insulation depends on the climatic conditions and wall materials (indicated in the project, taking into account your region).
Internal load-bearing walls- silicate brick M100
Partitions- blocks of cellular concrete / brick / porous brick.
Interfloor floors- hollow reinforced concrete slabs.
Roof- pitched. Coating at the discretion of the customer, truss structures - wooden.
Porch and balcony railings- wooden.
Stairs- individual production according to the scheme "metal stringers, wooden steps".
Sheathing of protruding truss structures (cornices, wind board)- profiled sheet with polymer coating / siding.
The composition of the project A-144-2
The general scheme of the AC set (AR + KR).
The final number of project sheets depends on the volume of the house and its features.
1.General data (Wall material specification, project sheet list, description)
2. Plans (architectural/masonry)
3.Facades (with marks and "color spots" of the cladding)
5. Section(s) (according to the characteristic parts of the building)
6. Foundation (Scheme of the foundation tape, ordering of wall blocks (even / odd rows for houses without a basement), reinforcement schemes, specifications)
7. List, marking and specifications of jumpers.
8. Floor slab layout plan. (assemblies, specifications)
9.Roof plan.
10. Scheme of the location of truss structures with a specification.
11.Knots on the roof.
12. Stairs (Metal products of stairs, assemblies, parts, specifications)
13. Floor design options
14. Other characteristic components and parts
common data
Ground floor plan. cellar plan
Second floor plan
Plan Notes
Facade 1 - 3. Facade 3 - 1
Facade A - D. Facade G - A
Section 1-1
Table of average design loads
Layout of foundation elements
Sections for foundations
The layout of the floor elements at elev. 0.000
Sections to the layout of floor elements
Monolithic plots UM-1, UM-2
The layout of the floor elements at el. 2.480
The layout of the floor elements at el. 5.300
Sections to the layout of floor elements
Reinforcing products
Ladder L1
Ladder L1. Details
Flight of stairs LM1
Fencing stairs OG1, OG2
Ladder L1. Details
Specification of elements for stairs L1
Ladder L2
Ladder LP1. Hatch covers KP1, KP2, KP3
Attachments for ladder LP1 and hatch covers KP1, KP2, KP3
Entrance porch KR1
List and specification of jumpers
Development of the wall along the B axis with ventilation ducts
The layout of the coating elements
Sections 1-1, 2-2. Nodes 1, 2 of the layout of the elements of the coating
Section 3-3. Nodes 5, 6 of the layout of the elements of the coating
Nodes 3, 4, 7 of the layout of the coating elements
Roof units 1 - 5
Roofing design
Schemes for filling window openings. Joinery specification
Individual window OK-4
Individual window OK-3
Individual window OK-5 with louvered filling
Cabinet Sh-1
Floor plans. Explication of the floors
Room finishing list
Room finishing list. facade finishing list
Plans of the first and second floors. Option for hot water supply from a gas heater
Basement plan. Option for hot water supply from a solid fuel hot water column
Plans of the first and second floors. Option for hot water supply from a solid fuel hot water column
Section 1-1. basement option
Floor plans. Explication of floors (option)
Layout schemes of foundation elements (option)
Basement wall layouts (option)
Sections on foundations (version with basement)
Variant of foundations on heaving soils
The layout of the floor elements at elev. 0.000 (basement option)
The layout of the floor elements above the basement. Sections
The layout of the floor elements at el. 2.800 (option)
The layout of the floor elements at el. 5.300 (option)
Units and details for floor layouts (option)
List and specification of jumpers (option)
Fencing of the subscriber node OG-1 (exemplary solution)
Furniture arrangement option
Front options
List and specification of jumpers (for facade option 1)
Porch KR-2 for facade option 1
Variants of attached buildings, architectural elements and details (facades)
Block options
A variant of attached buildings, architectural elements and details. Scheme
Drawings of the main set of brand VK
common data
Floor plans. Scheme B1, T3, T4, K1
Floor plans. Scheme B1, T3, T4, K1 (option with a gas water heater VPG-20)
Floor plans (version with solid fuel boiler KS-TG-20V)
Scheme B1, T3, K1 (option with solid fuel boiler KS-TG-20V)
Hardware Specifications
Drawings of the main set of brand OV
common data
Floor plans
Floor plans (version with convectors "Universal-20")
Floor plans (version of a decentralized heating system from a small-sized gaseous boiler)
Floor plans (version of a decentralized heating system from a small-sized solid fuel boiler)
Schemes of risers of the heating system (radiator and convector options)
Heating system diagrams (a variant of a decentralized heating system from a small-sized gaseous fuel boiler)
Heating system schemes (a variant of a decentralized heating system from a small-sized solid fuel boiler)
Subscriber node
Furnace plan. Installation and piping of a small-sized solid fuel boiler
Hardware Specification
Drawings of the main set of the GSV brand
common data
Plan of the 1st floor, gas pipeline scheme (basic option)
Plan of the 1st floor, gas pipeline scheme (option with a column)
Plan of the 2nd floor (option with a column)
Plan of the 1st floor (solid fuel option)
1st floor plan (non-blocking option)
Hardware Specification
Drawings of the main set of brand E
common data
First floor. Second floor. Basement. Cellar. Location plans
Hardware Specification
Drawings of the main set of the brand SS
common data
First floor plan, second floor plan with radio networks
Hardware Specification
Development "Z144" is a project of a one-story house with a garage for two cars and with the possibility of equipping the attic floor.
The construction of a one-story house will surely attract the attention of those who adhere to the practicality of one-level interiors. A fully enclosed kitchen will hide the features of the household from the rest of the daily area. The location of the kitchen on the side of the courtyard and the presence of an additional exit to the terrace near the kitchen is very convenient for organizing breakfast, lunch or dinner in the fresh air without leaving home. Some covered part of the terrace will serve as a great place for summer holidays near the house. Sufficient glazing areas of the day zone will guarantee excellent natural lighting in all rooms throughout the day and will create an indescribable feeling of harmony with the surrounding nature. The technical room, located behind the garage, for two cars is convenient for using and storing garden tools and other equipment, and also contains laundry equipment. If necessary and desired by the owners, it can be reduced or increased in size. A direct transition from the house to the garage through a passing vestibule will facilitate unpacking and transferring purchases from the car. The pantry, located in the kitchen, is practical enough to store the necessary kitchen appliances and supplies. The spacious bathroom is connected to the laundry room for maximum convenience. One of the two bedrooms has a small private bathroom and access to the terrace. At the request of the customer, it can be redesigned into a shared bathroom. The second, smaller bedroom also has access to the terrace, which makes it more comfortable, bright and modern. The presence of the possibility of arranging the attic will contribute to an increase in living space, and will also give the opportunity to carry out construction work in stages, as far as possible.
104.0 m2 62.8 m2
Print projectMirror reflection
- total area
104.0 m2 - Built-up area
130.0 m2 - Dimensions
10.0x13.0 m - number of storeys
1 - C / a and bathrooms
2 - foundation type
prefabricated / monolithic belt - Exterior walls
foam blocks / aerated concrete + insulation - Floor type
floor slabs / wooden beams - Roof
metal tile, flexible tile, ondulin, etc. I. Architectural (sketch) project
The draft architectural design includes a set of drawings, which is necessary for coordination with the relevant government agencies.
- Explanatory note (information about the customer, construction site, technical and economic indicators of the object, information about the materials used);
- Floor plans of the house;
- Plan of the basement or basement floors;
- Ground floor plan;
- Plan of the second (attic floor).
- Color schemes of facades;
- Incision;
- Roofing design;
- Foundation scheme (for reference).
Constructive decisions
Architectural and construction project, includes sections Architectural solutions and Constructive decisions made on the basis of accurate calculations, which allows to achieve a significant reduction in the time and cost of construction. This is achieved through the rational consumption of materials, without their multiple stocks; modern engineering and design solutions.
1. Structures of the underground part
- Layout of foundations (formwork; layout of blocks, etc.)
- Foundation reinforcement schemes.
- Sections, cuts and sweeps for foundations.
- Details and knots of a waterproofing, warming.
- Specification of materials and products.
2. Structures of the above-ground part
- Detailed floor plans for masonry walls and partitions. Knots, details.
- Jumpers: knots, details. Product specification.
- Floor schemes of prefabricated, monolithic ceilings. Knots, parts, reinforcement schemes.
- Monolithic sections, beams, belts. Knots, parts, reinforcement schemes.
- Columns. Knots, parts, reinforcement schemes.
3. Roof and roof structures.
- Scheme of the truss system. Sections, nodes, details for the scheme of the truss system.
- Specification of the elements of the truss system.
- Roofing design. Sections, knots, details for the roof plan.
- Specification of roofing elements.
Engineering Communication
1. Water supply and sewerage (VK)
- Floor plans:
- Piping layout: cold and hot water supply; household sewerage;
- Arrangement of plumbing fixtures and auxiliary equipment;
- Axonometric diagrams of water supply and sewerage systems;
- Scheme of the water meter unit;
- Specification of materials and products: valves, pipelines, sleeves, manifolds, fasteners, etc.
2. Heating and ventilation (HV)
- General instructions for the project;
- Plans of heating, ventilation and air conditioning systems indicating:
- Location of heating devices;
- Sections of pipelines;
- Elements of the ventilation system;
- The scheme of "warm floor", "warm walls"
- Estimated hydraulic diagram of the heating system, indicating the installation settings of the valves;
- Axonometric diagram of the ventilation system;
- Units for piping heating devices and other units;
- Specification of boiler, heating and ventilation equipment.
3. Power supply and electric lighting (ES)
- Schematic diagram of the supply and group network of the shield;
- Electric lighting network plans;
- Outlet network plans;
- Distribution network plans;
- Potential equalization network plans;
- Electrical power equipment;
- Roof plans. Lightning protection;
- Specification of equipment and materials.
Floor plans
Characteristics
Constructions
Project KO-144
Architectural solutions
An architectural project is a standard set of project documentation required to approve a house project in the district administration and obtain a permit to build a house on an allotted land plot
The complete project of the house includes
A set of drawings on the basis of which the house is being built. It contains detailed information about the technology and stages of building a house, from the foundation to the ridge of the roof. It consists of structural drawings, assemblies and parts, lists and specifications of materials for the purchase.
Sections include: water supply and sewerage, heating and ventilation, power supply. They allow at the design stage to select the appropriate characteristics of engineering equipment and calculate effective schemes for laying communications.
Additional changes in the project
Project preparation time
2-3 days.
Free delivery of the Republic of Belarus and the Russian Federation
What is included in the project of the house? What documents are needed to build a house?
Project documentation for the construction of a house consists of:
- Architectural design - section "Architectural solutions" (AR);
- Construction project - includes the section "Constructive solutions" (CD);
- Sections of engineering communications - Heating and ventilation (HV), water supply and sewerage (VK), power supply (ES).
The section "Architectural Solutions" (AR) is required for the approval of the project in local executive bodies and the development of the Land Development Project, which includes the General Plan of the site. The section "Constructive solutions" is necessary directly for the construction, because. contains information about the construction technology and construction of the foundation, walls, window and door lintels, floors, roofs.
Are sections of engineering communications necessary for building a house?
The presence of engineering communications sections in addition to the Construction Project allows, before the start of construction, to determine the final cost of building a house as accurately as possible without taking into account interior decoration. Of course, the typical layout of communications is not always suitable for clients who want to independently think through interior design. Therefore, even for ready-made projects from the catalog, sections of engineering communications are developed individually, based on a standard specification. At the same time, the cost of such a project is lower than for an individual project, due to the reusability.
I need a gas project, can you develop it?
The development of design documentation for the gas supply of a residential building is carried out by specialized organizations that have a license and permits necessary for this type of activity. To choose such an organization, in order to avoid problems in the future when coordinating the project, it is better to contact the administration of the construction area.
How to purchase a finished project at home?
In order to buy the finished house project you like, you need to place an order (leave an application with contact details) on our website in any form convenient for you. The easiest option is to click the "Order a project" button to the right of the floor plans. In this case, you can also select the necessary sections of the project, and specify the desired changes in the project. After that, a specialist of our company will contact you and clarify additional details. As a rule, we will need passport data to conclude an agreement and issue an invoice for payment. We will also need information about the owner of the site to design the project. After payment, the ordered project documentation will be sent to you.
What changes can be made to the project?
It is possible to make any changes to finished projects. The cost of project changes depends on the amount of required adjustments and can be announced to you after their discussion. Minor changes, such as the location and size of window openings, the installation of additional partitions or the transfer of existing ones, can be made by the Developer independently during the construction process, without formalizing changes in the project.
What is the best thing to do: choose a project on your own on the website, or come to the office for a consultation?
All ready-made house designs that are currently available for order are presented on the website. In the event that you visit our office in order to select a project, you still have to choose it from the catalog on the site. We do not store projects in printed form, because Each project is drawn up individually in accordance with the developer's documents. Based on the practice of our clients, it is more convenient to set aside time and get acquainted with the catalog on the site in a calm home environment.
How quickly can I receive a project at home after placing an order remotely?
If you plan to buy a finished project without changes, our specialists, within 1-2 days, will prepare the project and arrange its delivery by courier service to the door of your house anywhere in Belarus, Russia and neighboring countries.
The term for preparing a project with changes depends on the amount of required adjustments, and can take from 2 to 10 days.
