T: What kind of treatment for a wooden bath should I choose?
D: One of the most important stages in the construction of a Russian bath is high-quality wood processing. Among the compositions on the construction market there are antiseptics, special oils, varnishes. Do they all fit? What are the differences and which is better?
A bathhouse is one of the most complex structures in terms of wood protection.
High humidity and a large temperature difference create favorable conditions for the development of rot, mold and fungus. Again, there is a high risk of fire. Accordingly, you need to clearly understand the specifics of the steam room, washing room and rest room. Since the conditions within each of these parts are very different, the means will be different.
The steam room has the highest temperature. Under its influence, chemical compounds can be released outside and enter the body through breathing and open pores. This is fraught with serious harm to health: poisoning, allergic reactions and other negative consequences. Therefore, it is better not to process wood in a steam room at all.
A logical question: won't it deteriorate from high temperatures and humidity? If you choose the right type of wood, then it will not receive serious damage.
Traditionally, steam rooms are built from aspen and larch. But even on this unpretentious tree, spatter stains will still remain over time, and the shelves will wear out and darken. This will not affect the functionality of the steam room.
But if the neat appearance of the room is put in the first place, then there is only one option: treat the wood inside with oils designed specifically for baths. They create an effective protection of the wood from moisture, give a pleasant shade to the wood, penetrate deep into the pores without forming a film. The latter characteristic is very important, since wood with low thermal conductivity is usually used to finish the bath. The appearance of the film negates this quality: it heats up and can burn the skin.
All other means are unacceptable: they will either not provide protection, or they will begin to release toxic fumes.
The washing room is not exposed to extremely high temperatures, but its main problem is humidity, which is favorable for the formation of fungus, mold and bacteria.
Sometimes it is suggested to use a special varnish for saunas for walls and ceilings. In addition to the fact that it contains potentially dangerous components, the varnish forms a thin layer of a film on the tree. Its vapor permeability is extremely low, while moisture droplets will inevitably penetrate through the smallest pores of the coating and accumulate. This leads to a gradual violation of the protective layer, it will begin to crack and peel off, and the tree itself will begin to collapse and deform.
Again, let's not forget about the likelihood of getting burned from a heated film. Of course, the temperature in the washing room is much lower than in the steam room, but hot water often flows here, air enters from the neighboring steam room when the door is opened. In general, it is better not to risk it.
The best option is natural oils. They are absolutely safe for health, while reliably protecting the tree from moisture, mold and fungus.
Restroom
Everything is simpler here, since this part of the bath does not have any features. It can be based on aesthetic preferences. If you want to get a smooth and shiny surface or drastically change the natural color of the wood, then the choice is in favor of varnishes or paints.
If the goal is to emphasize the relief of wood, its naturalness, then oils for interior work are preferable.
There is no need for any special additives in the composition of the product for the rest room. The main thing is to use products that are resistant to abrasion for the floor. In oils, this effect is achieved due to the high content of natural wax; special chemical compounds are added to varnishes and paints.
Thus, the means for processing wood in the bath are chosen taking into account the characteristics of the steam room, washing room or rest room.
If we talk about the facade, then the situation differs from any other wooden structure only by increased requirements for fire resistance. This is achieved through special impregnation of wood, as a rule, even at the stage of its preparation for construction.
The only negative is that other coatings do not fit well on such an impregnation, and they hold less. If the decor of the facade is not of the last importance and you want to emphasize the beauty of the tree, give it a certain color, then you should sheathe the bath from the outside and tint the skin already.
How to process a Russian bath inside
A bathhouse is one of the most complex structures in terms of wood protection. High humidity and a large temperature difference create favorable conditions for the development of rot, mold and fungus. Again, there is a high risk of fire. Accordingly, you need to clearly understand the specifics of the steam room, washing room and rest room. Since the conditions within each of these parts are very different, the means will be different.
How to process a wooden bath
To protect the log house from destructive factors, you should not use all the preparations at once and indiscriminately. Each tool has its own purpose, if used incorrectly, the condition of the walls may worsen.
Appointment of protective materials for a wooden bath
Modern preparations are able to protect the log cabin of the bath from all kinds of natural and physical influences:
- UV Protection. Always protect the tree from the sun's ultraviolet radiation. In logs, the sun's rays burn out natural resins, destroy the structure of wood. The material ages, becomes gray. To process the log cabin of the bath, use compounds that create an ultraviolet filter. Containers with such impregnation are marked with the “UV” icon.
Types of protective coatings for a wooden bath
Means for the internal processing of a wooden bath
Preparations for internal walls are recognized by the inscription "For sauna". Quality products can be bought in the company store.
- The walls of the log house in the steam room and washing room are treated with special natural-based substances without artificial additives that do not emit toxic fumes at high temperature and humidity. Such drugs belong to the highest degree of environmental safety.
Means for external processing of a wooden bath
The coatings used to protect the bath from the outside are divided into impregnations and varnishes.
- Impregnations are able to protect the tree from ultraviolet radiation, but cannot withstand precipitation. Water washes away protective substances from wood, the sun burns bald spots on it, as a result, the appearance worsens, the logs quickly deteriorate. Impregnation protects wood for 5 years. Therefore, it is necessary to re-coat the walls with protective substances.
Types of antiseptics for a wooden bath
When buying an antiseptic, find out what type it belongs to:
- Washable antiseptic. It is made on the basis of metal salts. Salts are washed out with water, so they are used to treat the interior of the bath - the dressing room and the living room. Washable ones are not used to cover the outside of the bath, the walls of the steam room and the washing room.
Features of applying protective coatings for a wooden bath
Work is carried out immediately after the walls are erected, before the caulking. If the procedure is delayed, cover the log house with a film to protect it from precipitation. Before impregnation, clean the walls of dust, you can use a vacuum cleaner. Check that they are dry. Apply a protective agent to the log and rub it over the surface with a brush. Let the impregnation dry and repeat the procedure.
Practice shows that a log house covered with protective agents retains its original color and external beauty for a long time, and is not afraid of natural threats. It is better at the construction stage to spend a certain amount on the purchase of protective preparations than later to dismantle the structure and change rotten logs.
Do-it-yourself processing of a wooden bath
A wooden frame retains its operational qualities for a long time, if the bars are protected from adverse factors in a timely manner. Consider the main causes of damage to the walls of the bath and ways to protect
How and with what to process the lining inside the bath for high-quality wood protection
The construction of a bath is a responsible occupation that requires a serious attitude and includes many rules and strict adherence to technology. The functionality and safety of the structure depends on the quality planning, construction and proper execution of finishing work.
The most popular material for the construction of baths is wood. It is used as a material for the construction of walls and interior decoration. This article is devoted to questions on the topic of how and with what the processing of lining for a bath is carried out.
Processing lining inside the baths.
Work Tools
In order for the processing of the lining in the bath to take place according to the technology of painting, you will need a certain set of tools.
- Tray for paint.
- Brush, paint roller or spray gun.
- Protective clothing, rubberized gloves, respirator, eye protection goggles.
- Solvent.
- Paintwork materials for processing.
The choice - how to process the lining in the bath - depends on personal preferences and financial capabilities. It is worth noting that saving on materials for processing is inappropriate. These works are necessary to extend the life of the wood and protect it from the effects of steam and high temperatures.
When to Process
Impregnation of lining for a bath is carried out in two stages. The first is carried out before installing the lining. This is especially important in a room with a high level of humidity, to which the bath belongs. It is necessary to process not only the lining, but also the crate to which it is attached.
The final processing of lining in the bath is carried out after installation. In the future, with active use, professional builders recommend processing at least twice a year.
Processing lining before installation.
Note: surface treatment of the lining before coating with an antiseptic can significantly save paint and varnish materials.
The choice of paints and varnishes for processing
In order to understand how to process the lining in the bath, you need to understand the materials that exist for these purposes.
Their choice today is very wide.
- Drying oil. It is used for internal and external processing of wood, but practically does not protect the material from the effects of steam.
- Acrylic lacquer. It retains its natural color, protects from ultraviolet radiation, but when exposed to high temperatures it releases a strong odor.
- Varnish with solvents. Good antiseptic. The final price of the material is very low, but it is also not suitable for lining the sauna and bath lining, as it emits a pungent odor and toxins when heated.
- Specialized impregnation. This combination of materials is specially designed for baths and saunas. The advantage is the absence of odors and resistance when exposed to high temperatures in conditions of high humidity.
It has no special requirements for application and is perfect for do-it-yourself use.
Protection of lining from aging.
Carrying out surface treatment
Surface treatment
The following instructions will help to carry out the process of performing these works.
- To start working with your own hands, you need to clean the surface of dust. To do this, you can use hot water with the addition of soda at the rate of 300 g per 10 liters of water.
- Then the surface must be degreased.
- To obtain a more even surface, the lining must be sanded. These works can be carried out using pumice.
- Next, an antiseptic must be applied to the lining to protect against fungus.
- After that, you can directly impregnate the lining.
- In order to understand how to process the lining in the dressing room, it is necessary to assess the degree of influence of temperature and humidity in it. With a significant influence of these factors, the selection criteria should not differ from the standard impact.
- After the impregnation has dried, the lining can be painted with special paints.
Tip: when applying paint with a brush, the last layer is applied with movements parallel to the direction of the board fibers. Thus, brush marks will be almost invisible.
- The applied paint must be thoroughly mixed. This contributes to uniform color and surface drying.
- Before applying, you need to make a test stroke. This way you can make sure that the desired thickness of the paint and the correct choice of its color.
- In order to achieve the best effect from painting, the paint must be applied as thinly as possible.
- Metal elements can be painted with a special sponge.
- The primer is tinted to match the color of the coating.
- Painting lining can not be done in hot weather.
Tip: pay special attention to the processing of the ends of the lining. This is one of the most vulnerable places.
Tip: if you get dirty during work, you can wash your hands and other parts of the body with vegetable oil. It is harmless unlike solvents.
A vivid example of the perfect selection of colors for the bath.
Tip: If a light film appears on the surface of the paint, this may adversely affect the uniformity of the applied coating.
The way out of the situation is a piece of nylon, lowered into the paint. The brush can be dipped through it.
Lining care
The most effective method of caring for lining is timely ventilation. You can clean the wooden surface with a damp cloth without the use of household chemicals.
Serious soiling should be cleaned after the board has dried. To do this, sand the contaminated areas with fine-grained sandpaper.
Nowadays, you can also purchase professional bath care products. With their help, almost any contamination is eliminated without damaging the lining. It is worth noting that the price of such materials does not please with availability.
Timely cleaning of the bath is the key to cleanliness and its comfortable use.
Conclusion
Currently, one of the most popular materials for decorating baths with your own hands is lining.
In hardware stores, there are a lot of materials intended for processing lining. The choice depends on personal preferences and financial capabilities. The main requirement for surface treatment is compliance with the general rules for working with paints and varnishes, which are prescribed by the instructions for the selected material. Accuracy and a serious attitude to this work will provide an excellent result.
How to process the lining inside the bath, in the dressing room: do-it-yourself impregnation video instruction, price, photo
6) How to process the lining inside the bath, in the dressing room: do-it-yourself impregnation video instruction, price, photo
How to process lining inside the bath - practical advice and feedback
Wood is the best material for building a bath. The material has a huge number of advantages. But if conifers are selected, over time, under the influence of high temperatures, resin begins to stand out. Not everyone loves this smell, and touching such a surface can cause burns. Therefore, the internal walls of the room are sheathed with clapboard. In this case, you need to know how to process the lining inside the bath.
Protecting the walls in the bath from dampness
This finishing method improves the aesthetic feature of the interior and has a number of advantages:
- protection of external walls from dampness and decay, while additional thermal insulation is created in the internal space;
- you can choose a board that has pleasant and beneficial aromatic properties, thereby enhancing the beneficial effects of bath procedures;
- By taking different varieties of trees, you can achieve excellent results. This finish will look interesting and tasteful.
Processing lining inside the bath is a mandatory requirement to extend its life and preserve its appearance.
How to protect the steam room
Upon completion of the interior finishing work, you need to find out how to process the lining inside the bath. This process cannot be postponed, because under the influence of high temperatures, the lining will quickly begin to deteriorate.
When cheap types of wood are used, it begins to darken, become dirty, and lose its attractive appearance. When it comes to expensive varieties, they will withstand such exposure a little longer, but the service life will be significantly reduced.
The natural means of processing lining inside the bath (linseed, hemp oil) have been replaced by improved products that can protect the surface from moisture, pollution, decay, fungal infection and insect damage.
Means for processing lining inside the bath
Especially in this area, Finnish companies have succeeded, which are known for the features of steam rooms. Tikkurila produces a wide range of excellent products for bath lining:
- Supi Saunasuoja is a water based acrylic. It happens colorless and is perfect if you are wondering how to paint the lining inside the bath;
- Supi Laudesuoja - an oily coating for benches and seats;
- Supi Saunapesu will help to disinfect, bleach, dissolve lime deposits.
You can also select domestic funds:
- Estate U-409 - will prevent pollution, darkening;
- Eurotex Sauna - oil suitable for coating wooden shelves.
Surface treatment varnishes
When deciding how to cover the lining in the bath, you should not discard the varnished option. We are not talking about ordinary paints and varnishes. They are not suitable for use in such conditions. Varnishes have been developed for steam rooms, which are characterized by heat resistance, increased resistance to moisture. They create a decorative polymer coating and effectively protect the tree from various negative influences.
Covering the lining in the bath with varnish
As an example, we can take the products of the domestic manufacturer "Rogneda" Evrotex Sauna - a colorless acrylic semi-gloss lacquer coating, which has wax and an antiseptic in its composition. Able to protect wood flooring at temperatures up to 150°C. It should be applied in two coats with a brush or sprayer.
Covering for boards in the washing room and dressing room
The wooden surface in the sink is exposed to steam and hot water. Therefore, the importance of antiseptic is obvious. The coating can be made with the SENEG SAUNA antiseptic. It will prevent the formation of fungus, protect against insects at high humidity and temperature.
Antiseptic for processing lining
Surfaces that do not come into contact with the human body can be treated with Dulux Celco Sauna semi-gloss varnish. It has thermal and moisture protective properties. Withstands temperatures up to 120 °C without tarnishing, odorless. Requires two coats. It can be used not only on wooden, but also on stone, brick, concrete surfaces.
It is quite possible to perform such finishing work on your own. The process won't take long. And after a few days it will be possible to enjoy the updated bath.
Processing lining in the bath
It is very important to treat the lining in the bath with special means to extend the life of the materials and to protect human health. You can do the work yourself.
How to wash soot in the bath: solutions
Fans of a real Russian bath often face the problem of soot deposits on walls, ceilings and furniture. The bath is associated with the smell of wood, therefore, as a rule, natural, unprocessed wood is used for its construction. The tree has the ability to absorb moisture, and with it particles of soot and soot, which penetrate deep inside and are difficult to remove. There are several ways to remove soot in a bath. Let's take a closer look at each of them.
mechanical way
You can use an ordinary well-sharpened scraper or other handy sharp object and scrape off soot from every centimeter, but this method requires a lot of physical effort and time. It is also possible after each heating of the bath with a stiff brush to clean off the newly formed soot deposits, preventing it from penetrating deep inside. Of course, both proposed methods are labor-intensive and not entirely effective - there are knots, bumps, etc. on the tree, from which it is very problematic to extract soot particles.
Using a grinder will make the task a little easier, but is not the best solution, requiring after its use to wash off the resulting dusty layer with soapy water.
Folk methods
Some housewives, after each heating of the bath, regularly wash off the soot with soapy water, which, of course, takes time, which we do not always have.
The use of crushed bricks and river sand, i.e. abrasive substances, also does not lead to an ideal result.
Chemical cleaning method
The most effective method of cleaning soot deposits in the bath is the use of chemicals, among the wide variety of which we should especially note the highly concentrated MAZBIT + wash. This tool not only provides effective cleaning of the bath from soot, dissolving it, but also absolutely safe, does not lose its properties at any storage temperature.
MAZBIT+- Concentrated water-based detergent for cleaning various surfaces from the effects of a fire. The agent is a reinforced concentrated liquid based on reinforced alkaline composites and organic detergent additives.
Price for 1kg of concentrate: on request
The formation of soot and plaque on the walls in a Russian bath occurs as a result of a fire hazardous situation or due to improper operation of heating equipment.
The smallest particles of soot can not only settle on wooden surfaces, but also penetrate deep inside. For this reason, it is important to get rid of unpleasant plaque on walls and other surfaces in a timely manner.
How to quickly and effectively wash the soot in the bath without harming the wood?
Wood is a natural material with high hygroscopicity. Together with water, wooden surfaces are able to absorb any type of pollution - soot, soot, sweat, dust, etc. Therefore, floors, walls and ceilings made of wood covered with soot are not recommended to be cleaned with water.
When considering the question of how to wash soot in a bath on walls and other bases, the following means should be excluded:
- water;
- laundry or liquid soap;
- soft or abrasive sponges;
- hard brushes;
- spray.
Such products are allowed to be used for final cleaning after the soot has been cleaned from the wood.
To clean the walls and floor in the bath from plaque and soot, all work is recommended to be carried out using personal protective equipment:
- rubber gloves;
- points;
- gauze bandage or petal respirator;
- bathrobe;
- caps or scarves.
Many owners are wondering how to clean the bath from dirt and soot with their own hands. There are two cleaning methods available:
- mechanical devices;
- chemical compounds.
Mechanical cleaning
It is possible to safely remove the formed soot from ceiling, wall and floor surfaces with special devices - a scraper with a sharp base or a spatula. They allow you to clean every centimeter of the surface from dirt dry. To apply this cleaning method in practice, you will need a lot of free time and physical endurance.
To prevent serious contamination of the surfaces after each firing of the sauna stove, the floor and walls must be thoroughly cleaned with a soft brush intended for wood.
To simplify the task of cleaning soot, experts recommend using a grinder with a petal-type wheel with a diameter of up to 12.5 cm and a grain size of 35 units. Remove the resulting dust after cleaning the surfaces with a clean rag and soapy water.
Chemical cleaning
The easiest and most reliable way to clean contaminants is to use liquid chemical compounds. They are evenly applied to the base to be treated according to the instructions, and after a while they are washed off along with the dirt. In their composition, highly concentrated preparations contain alkaline components, which contribute to the rapid removal of soot from surfaces without damaging the wood structure.
Important! Do not use powders or abrasive cleaners to clean wood surfaces. They can be replaced with neutral degreasing gels.
To quickly clean walls and floors, you can use a mop with a telescopic handle.
No less effective in the fight against soot are chemical sponges impregnated with deep penetration substances. They contribute to the rapid and safe removal of the smallest particles of soot and soot that have penetrated the wood structure.
The principle of working with sponges is quite simple: holding the sponge with one hand, the surface is cleaned from top to bottom.
Important! Chemical sponges quickly become clogged and become unusable, so for quality work it is recommended to purchase a sufficient supply of material.
Next, clean water is poured into the container, to which a detergent composition is added, for example, for washing dishes, or any other degreasing agent. Soot is washed off with smooth movements with a soft sponge.
Cleaning soot from heating equipment
In case of improper operation of heating equipment: a stove or a boiler, soot particles settle on the surface of the device and objects that surround it. The sauna stove can be metal or brick, so the methods for cleaning soot may vary.
Metal constructions
Soot can be cleaned from metal stoves with a clean, damp sponge and soapy water. To remove a dense layer of soot, it is recommended to use fine river sand or brick fight.
Such abrasive materials clean the metal quite well, but also contribute to its destruction and corrosion. Therefore, the use of abrasives is allowed only in some cases, and after removing the soot, it is recommended to clean and paint the damaged surfaces.
An effective way to clean a metal stove is with neutral chemicals and washes that gently clean the surface of soot without damaging it.
In some cases, water with citric acid diluted in it, Coca-Cola, or a steel-bristled brush will help to cope with soot and soot on metal surfaces.
brick structures
Now let's figure out how to clean, which are most often exposed to the formation of soot and soot.
A simple detergent and a clean sponge can be used to effectively and safely remove dirt from refractory bricks. The agent is diluted in the required volume in water and applied with a sponge to the surface.
To protect the skin of the hands from exposure to chemicals and aggressive substances, it is recommended to clean with protective rubber gloves.
To completely remove soot from the brick surface, the composition must be thoroughly beaten to obtain a thick foam. The treated surface should be left for a few minutes and rinsed with clean water.
The next way to process bricks is to use vinegar essence. To obtain a concentrated essence, it is necessary to dilute table vinegar in tap water in proportions of 1: 2 (1 cup of vinegar to 2 cups of water). The brick is thoroughly moistened with liquid and left for 10 minutes.
If the surface of the stove has not been washed for a long time, so the soot has penetrated deep into the brick pores, vinegar can not be diluted, but immediately applied to the brickwork. Further, the procedure is performed in the same order. After cleaning is completed, the brick is cleaned with a soft brush and washed with clean water.
Periodic cleaning of stoves and bath surfaces from soot not only prolongs the life of the heating equipment, but also ensures the safe conduct of bath procedures.
In addition, excess soot and soot formed can cause fire hazards. Constant maintenance of the bath in cleanliness and order prevents the appearance of serious contamination on all surfaces of the building.
Both points of view have the right to exist.
For those who have the opportunity to change the finish of the steam room every 2-3 years, it hardly makes sense to treat wooden surfaces with anything. The same applies to extremely careful dry steam lovers, and to those who rarely relax in this way.
But hunters take a steam bath in a big company, and with birch brooms and fragrant oil, experts still recommend taking care of extending the life of natural material.
Moreover, specialized protective compounds are present in the assortment of many paint manufacturers, for example, Akzo Nobel (Dulux trademark), Belinka, Tikkurila, Teknos, Rogneda, Senezh, Empils.
Please note that all compositions for baths and saunas offered by the domestic market can be divided into two groups:
- for processing wooden sheathing of bathhouse ceilings
- for processing walls (more numerous) and for impregnating shelves (beds), benches and other bath elements that are in direct contact with the naked body.
Processing the walls and ceilings of the bath - what and how?
To make the right choice among protective compositions for the treatment of baths and saunas, it is advisable to understand their properties. It's easy if you carefully read the manufacturer's instructions.
For example, the water-borne antiseptic "Sauna" ("Senezh") on an acrylate basis forms a transparent, breathable, dirt- and water-repellent heat-resistant polymer coating on wooden surfaces.
It not only protects wood from biodamage, but also has an antimicrobial effect - it destroys household pathogenic microorganisms that are the causative agents of infectious diseases in humans.
Natura (Teknos). Initially, the colorless composition does not change the tone of the wood, but it is easy to tint it in any shade you like according to the Technomix system. The translucent coating will leave visible the natural pattern of wood fibers and at the same time enliven the interior.
By the way, the use of a tinted composition will help non-professionals to distinguish treated surfaces from untreated ones.
An unusual spectacular shine, along with water and dirt-repellent properties, will be given to wooden walls and ceilings by the application of Supi Arctic (Tikkurila) mother-of-pearl acrylate protective composition. If desired, it is also tinted according to the Arctic color catalog.
How and how to process shelves and benches in the bath
Readers may have a reasonable question: “Why can’t all the surfaces of baths and saunas be treated with one composition, and why do you need to buy different ones?”
The fact is that for shelves (beds) and benches, in order to avoid burns when human skin comes into contact with them, materials have been developed that are well absorbed into wood and do not form a surface film, such as varnish. Dry wood has a very low thermal conductivity, and even at a sauna temperature of over 100 °C, its surface does not feel scalding hot. If there is a varnish film on the shelf, this will surely lead to a burn.
So, to protect the clean, untreated wooden shelves of the sauna and bath, the oil compositions Sauna Natura (Teknos), Supi Laudesuoja (Tikkurila), Eurotex "Sauna" ("Rogneda") are intended. Some nuances should be remembered when using these products: they are applied to clean and dry wooden surfaces with a cloth, sponge or brush, in areas with high absorbency, the treatment is repeated, then left for some time to complete the process (from 1 to 24 hours), after which heat up the room. Remove excess oil from the surface with a clean cloth.
The search for the necessary funds can be facilitated by the universal protective composition Supi Saunavaha (Tikkurila) with natural wax. It is used on almost all wooden surfaces of the bath: shelves, walls, ceilings, doors, window frames.
Compositions created specifically for wooden floors in baths and saunas are practically not found on the domestic market. Maybe that's why the boards on the floors of steam rooms are often left unprotected.
Meanwhile, experts recommend using heat-treated wood for these purposes. It has noticeably reduced sensitivity to the effects of adverse factors, swelling and shrinkage with changes in humidity are reduced by 20-50%, it is characterized by resistance to damage by fungi, bacteria and insects. An ordinary tree acquires similar properties only after being treated with various impregnations or varnishes.
Sometimes builders-finishers apply several layers of varnish to the floor, thinking that the thickness of the coating will make the board immune to moisture and temperature changes. But the coating becomes slippery from water or oil that has fallen on it, and the floor becomes unsafe. In addition, after several bath procedures, the varnish can crack and peel off. If the manufacturer or reseller of paints and varnishes recommends any type of steam room floor cleaner, remember that it should be well absorbed into the wood and not cause discomfort.
Bath treatment - pros and cons: opinions of specialist representatives of manufacturers of treatment formulations
1. Unsightly stains will certainly appear on the ceilings, walls and floors of baths and saunas from splashing aromatic oils, exposure to water, sweating, since wood, especially heated, quickly absorbs any liquids. This means that the owners of a steam room or sauna periodically face the problem of removing various stains and contaminants.
The most resistant of them, which cannot be removed with water and a brush, have to be cleaned with scrapers on dense, crack-free wood.
In this case, of course, the appearance of the skin suffers. If you cover the walls, ceilings and shelves with special protective compounds, they will remain beautiful longer, and it will be much easier to clean them.
By the way, in a sauna with aspen or linden lining, a fragment of the wall near the stove can be made from heat-treated Canadian cedar (this is a coniferous species, but due to heat treatment, almost all the resin has been removed from the wood). Then, when the temperature rises, the room will be filled with the natural aroma of pine nuts.
2. Painting the interior of saunas with compositions not intended for this purpose is one of the typical mistakes.
Such coatings do not withstand exposure to high temperatures and steam, their durability decreases, their decorative appearance suffers, and most importantly, instead of health procedures, people inhale harmful substances that are released when the protective film is destroyed.
It forms a strong, smooth and transparent film with high elasticity and wear resistance, resistant to moisture and temperatures (up to 120 V). The product does not contain fungicides, algicides, insecticides and is safe for indoor use.
3. The most problematic place in baths and saunas is the floors. Ideally, they should be made from heat-treated wood.
Due to the lack of special materials, ordinary boards are often coated with Unica-Super varnish, diluted by 40-50% with white spirit 1050. Moreover, the varnish is used as an impregnation, preventing the formation of a varnish film on the surface (as practice shows, it quickly cracks and peel off). But it is better to use a novelty - Supi Lattiadljy (Tikkurila) floor oil. It penetrates deep into the pores of wood, reliably protects it from moisture, dirt, and also reduces cracking. The oil emulsion is made on the basis of vegetable oil. Apply it to any wood, including heat-treated and hardwood.
Common areas (especially those intended for water procedures) must be kept in perfect sanitary condition. Baths (saunas) are among such premises. They are divided into private, which can be located on a summer cottage or individual land plot, and public (open to many people).
Price from: 2 000 rub.
In some cases (for example, in a country house), the premises are idle in winter, in others they are used all year round. One thing is clear: the disinfection of the bath should be carried out at regular intervals. If it is not carried out in time, this place can become a breeding ground for dangerous diseases.
Disinfection for individuals
Disinfection for legal entities
| Object area | single processing, price of 1 treatment | Contract for 4 treatments, per year, price for 1 treatment | Contract for 12 treatments, per year, price for 1 treatment |
| up to 100 m2 | 3400 rub. | 2700 rub. | 2300 rub. |
| from 100 to 200 m2 | 26 rubles/m2 | 22 rubles/m2 | 17 rub./m2 |
| from 200 to 300 m2 | 21 rub./m2 | 18 rub./m2 | 14 rub./m2 |
| from 300 to 400 m2 | 19 rub./m2 | 16 rubles/m2 | 12 rub./m2 |
| from 400 to 500 m2 | 17 rub./m2 | 13 rubles/m2 | 10 rub./m2 |
| from 500 | negotiable | negotiable | negotiable |
Why are such events needed?
Disinfection of the bath is relevant, since such rooms differ in the following features:
- humid environment;
- temperature fluctuations;
- abundance of people.
All of the above factors create excellent conditions for the development of pathogenic microbes and fungi. Contact with them, their inhalation into the human body cause serious illness. You should not frivolously hope (as some irresponsible owners do) that the disinfection of baths or saunas is provided by alcohol tinctures used by visitors. You need to contact the experts.
Technology
How often is the sauna disinfected? If this is a private bath, where only family members take a steam bath, two to four times a year is enough. Disinfection of the public sauna should be carried out daily (ideally after each session).
In order for the disinfection of the bath to be truly effective, you should contact professionals. You will be helped by the United City Destruction Service. Among our services is the disinfection of baths in Moscow and the region. We work with private and professional owners, we guarantee the result. The price for sauna disinfection services is affordable for each client, so there are always a lot of regular customers. Among them are well-known companies - for example, the Auchan supermarket chain.
At the same time, the process itself implies a special approach. We choose substances that are active against microbes, but are safe for humans. Only specialists can ensure the disinfection of the bath. Do not waste time trying to deal with the problem yourself - contact us.
Reliable company - a wonderful result
Sauna disinfection is not a pleasant procedure. Given the use of chemicals, it can be noted that it is also dangerous. However, there is the "United City Destruction Service", whose specialists will quickly cope with this work for a small cost. You won't even notice how it ends. Our price for disinfection services depends on the complexity and volume of work. She is always appropriate.
If you need disinfection of a bathhouse in Moscow and the Moscow region, order it on the website or by phone. You can find out the prices from the employees of the company. If necessary, request a call back.
