What kind of table can be made from unnecessary boards with your own hands? Original and functional: how to make a wooden table with your own hands DIY garden table

The table is the second item after the stool that every novice furniture maker should be able to do. The table can be created from different materials and have unique characteristics. A great intention for you will be the desire to make your product out of wood.

A wooden table is fairly easy to create with your own hands, it is enough to have minimal skills in working with carpentry tools. And the cost of the material will be significantly less than a table using metal, glass or plastic.

A piece of furniture made by oneself will correspond as closely as possible to the desires of a happy owner, and will delight the eye incomparably more than purchased. And most importantly, when creating a table with your own hands, important skills are acquired in working with the material, which will make the restoration of operational defects much easier.

What makes a good table

A particularly beautiful countertop can be made from cheap non-grade pine boards, knotty and serrated (without falling knots, rot, fungus, wormholes), which, when well processed, give a wonderful pattern, to achieve which, when working with expensive wood, much more effort and effort must be applied .

When choosing a material, it is important to take care of the strength of the future product. To do this, pay attention to the density of wood.

Soft (spruce, pine, chestnut, dogwood) is easily damaged during operation, which adversely affects the durability of the table. But scratches and dents can be hidden, although the restoration process will be quite frequent.

Hard woods (beech, ash, maple, oak, walnut, fruit woods, elm) are quite difficult to handle on their own. And you may have to look for masters to work with them. But ensure the durability of the product.

External characteristics

It is very important to determine in advance for yourself the appearance of your future product. The main rule of a good table is if the design fits well into the space allotted for it and leaves a lot of free space for those sitting.

It is also important to consider that a table with a rectangular top will accommodate fewer people than a table with a round or oval shape with the same area. And it would be more expedient to make a table for guests in a folding version, which unfolds for big holidays, and is folded in everyday life. Also, such a folding table will be convenient in the backyard.

Most often it is required to choose a kitchen table. It should be roomy and pleasing to the eye, to facilitate the process of working with him. But it should not interfere with movements in the room and in no way interfere with the process of culinary creativity.

Based on this, it is absolutely clear that the size of the table is selected depending on the area of ​​\u200b\u200bthe room. Also, softwoods cannot be used for the kitchen table due to its use in "extreme" conditions.

The choice of the external characteristics of the product is a responsible process, therefore, before starting the formation of a table for a dacha with your own hands, it is extremely necessary to carefully assess the needs for which this table is being made.

Transferring ideas to paper

When creating a design that is the fruit of your imagination, you will have to develop a diagram and drawings of your table with your own hands. Why there is a huge variety of electronic programs.

After a thorough development process, it is extremely important to transfer the result to paper. For fast and high-quality work, it is very important to use this manual constantly.

creative process

Preparation of drawings is the last preparatory stage. Next, you can proceed to the most important part of the work - the manufacture of parts. Do-it-yourself wooden tables are created much easier if the drawings and diagrams are as informative as possible. This reduces the chance of errors to a minimum.

You can personally make it as a desk, as well as a coffee or children's version. With a certain skill, it is possible to create a computer desk. As well as a dining or country model. Each of the options is quite easy to implement.

The canvas for the countertop and the board with the bars, from which the rest of the parts will be formed, are processed with the available tool or, at worst, coarse-grained sandpaper to remove defects present in the form of bumps and protruding knots.

Boards are sanded from all sides, including side edges and corners. If you are creating a canvas from saw cuts of wood, you need to make sure that they are dry enough, and also close up small cracks found after visual inspection. And it's better to screw them. To get a more reliable grip of the canvas and save time on assembling the elements.

Transfer the scheme to the finished canvas. The main elements are cut with an electric jigsaw and, if necessary, the sections are ground. The protruding support elements are cut off by about 3 centimeters. Horizontal cuts are made on both sides of the supports (legs).

The blanks are covered with a preparation that prevents the ingress of moisture and pests, and only after the final drying is it allowed to resume the process of creating the table with your own hands.

Putting the details together

After making all the necessary details, you can begin the sacred rite. Namely, to collect the desired masterpiece together. And it can be either a round table or any other selected product.

First you need to assemble the support structure with screws and glue (first, thin channels are drilled with a drill for the length of the screw, otherwise there is a chance of splitting the part). Galvanized screws can be used for connection, as they do not rust, and this is very important for wood products. Or wood glue.

According to the basic rules, the frame in length and width should be 30-25 cm less than the countertop.

From the sides you need to attach additional boards to stiffen and hide the place where the legs are attached. Cut off the chamfers in the places where the legs are installed.

Then the table leg is fastened in place with clamps, and holes for the bolts are drilled into the frame. Install the support elements in their places and fix them with stoppers. Strengthen the structure with wood glue. Then install the countertop in place for which furniture corners are used. At the very end, all visible screws are hidden with wood-colored plugs.

The final stage. Finishing

A photo of the completed table can be seen below. Achieving this result is surprisingly easy. Optionally, you can round either only the corners or the entire end, depending on the type of table. It will be nice to make chamfers on the edges of the tabletop.

Roughnesses are polished in the entire structure, with the help of putty, mistakes are hidden. To extend the life of a table assembled by oneself, it is necessary to cover it with several layers of varnish or stain.

Thus, making a beautiful wooden table with your own hands is a fairly simple leisure activity. And easy to do. The guarantee of extracting a solid, ideal in terms of dimensions and aesthetic result according to your drawings is: strict adherence to the instructions, error-free execution and carefully selected material. And the resulting table will harmoniously fit into the exterior.

DIY table photo

Everyone associates the word dacha with a small garden, a vegetable garden and a comfortable seating area. After all, after working in the garden, you really want to relax in nature, fry a barbecue and just relax with your family.

To equip a recreation area, you need to build a gazebo or make a canopy and install it with a bench or chairs.

Such a piece of furniture does not have to be bought in a store ready-made. You can do it yourself if you stock up on free time, drawings, tools.

The feature of tables for outdoor use is their:

A table in the country can be made from different materials:

• tree;
• vines;
• metal;
• natural or artificial stone.

Each individual option has its own advantages. But most wooden models are in great demand. Since it is pleasant and convenient to work with a tree, and you can make a product of any complexity on your own, without making much effort.

What type of wood to make?

Before you start building a country table, carefully select the wood. Since the service life of the product, its wear resistance and appearance will depend on its technical characteristics. Most often, outdoor furniture is made from:

Concerning benefits wooden outdoor furniture from any type of wood, then these include:

To shortcomings wood products include:

• the likelihood of ignition;
• insect damage;
• the likelihood of decay.

Advice: to increase the resistance of the tree to all negative factors, it must be treated with special means.

Also, most people refer to the disadvantages of country tables made of wood. big weight. But such products are installed on the street once a year. At the request of the owners, for the winter they can be removed to the summer kitchen or any household. building.

Attention: when placing a wooden table in the open air, it is necessary to think over the space for water drainage.

Dimensional drawing

To make a table with your own hands, you will need to draw up a drawing. So you prevent mistakes during the workflow, and make furniture much faster. This drawing should have the following symbols:

• length of the product;
• width;
• depth;
• height.

Also in the drawing, the materials of their manufacture should be noted. For furniture designed for 8-10 people, the optimal size of the tabletop will be 80 by 120 cm.

Important: the dimensions of the table for giving are calculated based on the needs of users and the availability of free space in the summer cottage.

If there is a lot of free space, you can assemble a spacious country house. table with benches. The advantages of this design include:

• capacity;
• stability;
• ease of use.

Some people prefer tables with ice box. Such designs are convenient. In the summer heat, they can cool drinks. This model is practically no different from a product with benches. Only in the middle of the tabletop is an ice box made. Instead of an ice box, you can build a table with flowers. In the middle of the tabletop you will have a beautiful flower bed.

If there is not much free space on the plot, you should opt for folding model furniture. It differs:

• compact size and ergonomics;
• light weight;
• different transformation options.

Important: for the manufacture of countertops, it is worth choosing a board with a thickness of 3-5 cm.

Tools and Consumables

From the tools for making a wooden table, you need to prepare:

From the materials we need:

• lumber;
• furniture glue.

Manufacturing and assembly

Main components tables are:

• load-bearing frame;
• countertop;
• support bars.

The process of assembling the table is carried out in the following sequence:

A round table will look very attractive at their summer cottage. For him, you need to prepare:

• base;
• racks;
• countertop;
• tabletop base.

The assembly stage will consist in the following sequence:

How to paint garden furniture

Since the garden table will be located in the open air, it will be affected by increased moisture and sudden changes in temperature. Also, the tree will be attacked by pests.

You can extend the life of the country table with the help of different impregnation, paint, varnish.

To do this, use a special outdoor paint.

A photo

Real craftsmen can make works of art out of simple outdoor furniture:

Useful video

All steps are shown in detail in the following video:

Conclusion

In conclusion, it is worth noting that you can make a country table with your own hands in a fairly short time. To do this, a drawing of the future product is created, consumables and tools are selected. With a competent approach to assembling a table for a summer residence, you will build an attractive and practical product, behind which your friendly family will gather every weekend for a summer and pleasant vacation.

In contact with

Dacha is, of course, the place where you want to take a break from the bustle of the city, breathe in fresh air and just drink fragrant herbal tea on the veranda at a table made for giving with your own hands. Such a table will not only give a special charm to such a simple ceremony, but will also become a source of pride for you and your loved ones.

Option 1. Table with legs

When choosing materials for a table, first of all, you should pay attention to the quality of wood - not all wood is suitable for use. Softwoods, such as spruce and pine, are malleable and easy to work with, but such material is more flammable without proper processing, and the resins released can ruin the tablecloth.

Hardwoods (aspen, oak, ash) are more advantageous, products made from them are strong, durable and have an attractive appearance.

Materials and tools

For the internal arrangement of dachas and country houses, long narrow ones are more acceptable, allowing you to move freely around the room. This should be taken into account when preparing everything necessary for work and designing the table itself.

For a table, it is preferable to use a board with a thickness of at least 30 mm. This thickness will ensure the strength of the table and the ability to withstand heavy loads. The optimal length ranges from 150-200 cm. Two ready-made wooden shields 30-2000 mm in size can be purchased.

Balusters or wooden bars for legs. Curly balusters will give the homemade table a production chic and luxurious look. And for the manufacture of legs from a bar, you need to choose boards with a minimum section of 50x50 mm. A comfortable table height is provided with a leg height of approximately 73-75 cm.

Other materials and tools.

1. Boards 20 mm thick and 8-10 cm wide for the tabletop frame.
2. Wood putty.
3. Screwdriver and self-tapping screws 30 and 50 mm.
4. Sandpaper of various grits, as well as a holder.
5. Clamps for fixing legs and countertops.
6. Electric drill.
7. Sander.
8. Building level.
9. Square.
10. Roulette or centimeter.
11. Marker.
12. Glue.

Prices for various types of building timber

Construction timber

Manufacturing steps

When preparing materials, all boards and beams are processed with a planer, grinder or coarse-grained sandpaper to remove bumps, the remains of cut knots, and clean up cracks. The boards must be even and smooth, so they are sanded from all sides, including the ends, edges and corners.

If it is planned to manufacture a solid shield without gaps, then it is better to purchase grooved materials - this will create a stronger adhesion of a single web and save time on fitting elements. Chamfers are cut from the edges of the bars for the legs.

Table frame assembly

The frame helps to increase the strength and stability of the table, its dimensions completely depend on the parameters of the tabletop, but there are a few general rules: both in length and width, the frame should be 30-25 cm smaller than the tabletop.

Video - DIY garden table

The frame itself is assembled from 4 boards that form the outer frame, and 6 internal cross bars. The boards are installed on the edge at a right angle using a square and tightened with 50 mm self-tapping screws. The joints are pre-lubricated with glue (PVA or carpentry). To prevent splitting of the boards, you can drill pilot holes in them and only then screw in the screws.

Along the length of the frame, markings are made for the cross bars, and guides are drilled. It is very important that the cross members are strictly perpendicular to both sides of the frame frame. The ends of the cross bars are smeared with glue, and the whole structure is fixed with self-tapping screws. Make sure that the screw heads do not protrude, but are completely “drowned” in the wood.

The boards of the tabletop are connected, leveled with a tape measure and stacked face down on the floor, a frame is placed on top so that the cross planks lie tightly on the tabletop. Guides for self-tapping screws are drilled in the slats, and all elements are tightened with 30 mm screws. There are 5-6 self-tapping screws for each cross board.

Assembling the table legs

The tabletop is laid on a workbench or several stools for the subsequent installation of legs. The table leg is fixed in the corner of the frame with clamps, and guides for self-tapping screws are drilled in the frame.

Before attaching the legs, glue is applied to the end of the bar - this will protect the table from loosening and will contribute to greater strength. It is recommended to fix the leg on each side with four screws, but if desired, you can additionally use metal corners. Round balusters are fixed with long self-tapping screws on the front side of the table, and square ones - on corner fasteners.

Prices for popular models of screwdrivers

Screwdrivers

Finishing

After installing the legs, the table is turned over and placed on the floor. Depending on the design of the table, corners are sawn off with a jigsaw along the radius or the end is completely rounded. Bevels can be cut from the edges of the tabletop and everything is carefully sanded.

If necessary, scratches and cracks resulting from work are repaired on wood. It is better not to touch the heads of the screws so that it is possible to tighten the structure.

After the final grinding, all dust and chips are removed from the table, and the product itself is covered with stain or several layers of varnish.

Tables with elements of decoupage decor or a single painting look beautiful and unusual. But you should not hide the beauty of natural wood under a layer of paint, modern varnishes and impregnations will do all the necessary work to protect the product from moisture.

Video - Table with legs for giving

Option 2. Stump table

An unusual and non-standard way to equip a backyard space is to create interior items from natural materials. When ennobling the territory, old or threatening trees are often cut down. If there is or was just such a tree at your dacha, then there will definitely be no problems finding a suitable stump. If the idea came spontaneously, then you can look for the desired stump in the clearings, in the nearest forest, or ask the owners of neighboring plots.

Materials and tools

To make such a fantasy table from a stump, you will need quite a bit:

• wood for the countertop, the recommended thickness of the countertop is from 20 mm, when choosing boards, you must follow the rule “the larger the countertop, the larger the cut of the board”;
• stump. For work, you will need a dried stump of any kind of wood, the main thing is that the wood is whole, not damp and not rotten. If the tree was cut down recently, then the stump must be properly dried. And it is better to do this by placing the stump in a warm, dry room or outdoors in sunny weather. It must be remembered that several weeks is not enough time for high-quality drying. As a rule, the whole process takes at least two months. You can determine the condition of the wood by the ease of separation of the bark - if the bark moves away without effort, then you can get to work;
• water-based wood varnish in a natural shade or transparent. It is this composition that will best emphasize the texture and dignity of natural wood;
• sandpaper of various grain sizes and a holder;
• planer or grinder;
• chisel;
• building level;
• roulette;
• hammer and nails;
• screwdriver and screws;
• abrasive fibre.

Manufacturing steps

Stage 1.

The dried blank of the future table must be cleaned of bark. For this step, a chisel or chisel will come in handy. It is necessary to remove the bark very carefully and carefully so as not to damage the wood and prevent the appearance of cracks and splits. All soft and rotten areas also need to be removed.

Stage 2.

After the bark has been removed, the stump must be leveled relative to the horizontal plane. To do this, using a level, a flat surface is prepared, and the base of the future table is installed on it.

If curvature is observed, then the shortcomings are eliminated with a planer. At the same stage of work, excessively large rhizomes of the stump and all unnecessary parts are sawn off with a hacksaw, the cuts from which are then polished.

Stage 3.

The leveled stump is ground with a disc grinder, especially its horizontal parts. The sides of the stump are also polished, and hard-to-reach places are processed with coarse-grained sandpaper. This is a rather laborious process that requires a significant investment of time.

Stage 4.

Cracks and recesses in the trunk must be cleaned of dirt and dust with a chisel, after which they should be carefully folded in half (working layer outward) with sandpaper to carefully process them from the inside. The remains of wood dust are cleaned with a brush or a building vacuum cleaner.

Stage 5.

To prevent rotting of the stump and ensure air circulation between the table and the floor, furniture legs can be attached to the base from below. The presence of legs will make it more convenient to move the table.

You can choose any legs: metal, furniture wheels or special rubberized stands. It is best to fix them with self-tapping screws to the base of the stump, the number is chosen arbitrarily, based on the size of the table.

Stage 6.

After installing the legs, we proceed to the crate of the upper part of the stump. To do this, we fill two parallel planks perpendicularly on the sidewalls, and on top two more rows of holders - a total of 6 planks fastened together with nails. This will be the frame for the countertop.

Stage 7.

We fasten the prepared tabletop boards from below with transverse slats. The shape of the tabletop can be very diverse: round, rectangular, with rounded corners. The winning option looks like a table with a round or oval top.

To give this shape, you can use a home-made device made of thread, pencil and nail: the end of the thread is tied around the pencil, and the tip of the nail is placed in the middle of the tabletop, outlining the circle with a selected radius, after which all the excess is sawn off, and the edges and surface of the tabletop are processed with a grinder.

Stage 8.

Holes and defects in the boards can be decorated with finely chipped shiny stones, filling them with varnish and treating them again after drying with a grinder to smooth the surface.

The finished tabletop is fixed from below on the crate with holders on nails or self-tapping screws matched to the size.

The finished table is varnished in several layers. After applying the first layer, the product is thoroughly dried and processed with fine-grained sandpaper. This will prevent flaking of the varnish, and subsequent layers will lie more evenly.

After removing the dust, the second and subsequent layers of varnish are applied without grouting. If desired, after drying, the last layer can be treated with abrasive fiber - this will remove excessive shine and give the surface a dull finish.

Such a creative table will decorate any veranda, especially in a pleasant frame of green bushes or flower beds.

Prices for paintwork materials

paints and varnishes

Video - Do-it-yourself table for giving from a stump

Beech - quite often used by furniture manufacturers, as it is a hard rock that is quite plastic and durable. In terms of strength, beech is not inferior to oak. Compared to oak, beech is cheaper. The color of such wood can be from reddish-brown to pinkish-yellow.

• has high decorative qualities;
• dries quickly;
• easy to process.

• afraid of moisture;
• poorly polished.

Oak is a hard rock with great strength. The natural color of oak stretches from yellowish white to yellowish brown with a slight hint of gray or green. Oak has a number of other advantages - very easy to use, easy to glue, practically does not rot and has a beautiful appearance.

• despite the high viscosity of wood, it is processed quite well;
• bends easily;
• decay resistant;
• lends itself well to artificial aging techniques.

• price;

Ash wood is harder than oak. The color of the wood is light and delicate golden. Most often it is used in the manufacture of bent and carved furniture or as a facing veneer.

• bends well after steaming;
• cracks a little when drying;
• when discolored, it acquires an unusual shade of gray hair.

• in conditions of humidity, wood is quickly damaged by a wormhole;
• poorly polished.

Aspen is a deciduous tree. It belongs to the genus Poplar. This is a very large tree, it grows up to 30 meters in height and may well reach a thickness of 1 meter. Since it grows very quickly, a lot of wood is obtained from it.

• very high moisture resistance;
• the ability to retain heat, but not give it away;
• bactericidal (you can put such furniture in the children's room without fear that it will harm).

• not very presentable appearance;
• the possibility of darkening, both partially and completely;
• it is worth fearing that the inside of the product may begin to rot.

Pine is a soft wood, which is most often used in the manufacture of frames for upholstered or cabinet furniture. The main advantage of this type of wood is its high resistance to decay, humidity and temperature extremes. In addition, pine is one of the most common and affordable materials.

• ease of processing;
• easy to glue;
• pleasant medicinal smell that releases phytoncides.

• easily scratched and damaged.

Many of the people, coming with their families to their summer cottage, first of all want to get together at a large table to relax and have lunch. Meals in the country, whether breakfast, lunch or dinner, usually take place outdoors. That is why a special place must be assigned to your garden plot, which plays the role of a kind of dining room. In order to avoid the need to take furniture out of your house every time, you can simply make do-it-yourself table for giving from improvised materials. Naturally, it is necessary to take care not only of the construction of the table, but also of the chairs. Making a table for a summer residence is not such a difficult matter, for example, an experienced summer resident, who is not the first time building structures on his site, will take no more than one or two hours. Those who are building for the first time will have to make some efforts.

Benefits of making your own furniture

Choosing the right furniture for a summer residence is not so difficult, because manufacturers offer a fairly wide range of products for every taste and budget. Nevertheless, independent production of country furniture is becoming more and more popular, which is not at all surprising. Thanks to this solution to the issue of arranging a dacha, you can not only save a significant part of the budget, but also get a lot of new impressions in the process of work, giving vent to your creative powers. The result of the work will be a thing that will not only ideally fit the interior, but will also become the highlight of the whole house, attracting the eyes of guests.

Required Tools

To build a table for a summer residence, you will need the following tools:

• hacksaw or circular saw;
• drill and a set of drills from 1 to 10 millimeters;
• a hammer;
• ring wrench (12 and 14);
• corner;
• measuring tape.

Building materials needed in construction:

• boards in the amount of 11 pieces (board length 4 meters, width 100 millimeters, thickness 50 millimeters);
• boards in the amount of 8 pieces (board length 6 meters, width 100 millimeters, thickness 50 millimeters);
• galvanized furniture bolts for fastening in the amount of 20 pieces;
• galvanized nails in the amount of 100-150 pieces (3.5 by 90).

Drawing

Before starting construction work, special attention must be paid to drawing up a drawing of the future table. The following is a brief discussion of one such example:

1. table legs, 4 pieces. The length of the legs is 830 millimeters;
2. seat support elements in the amount of 2 pieces. The length of the elements is 1600 millimeters;
3. tabletop support elements in the amount of 2 pieces. The length of the elements is 80 millimeters;
4. boards in the amount of 14 pieces. Length 2 meters. These elements are necessary for the table and seats;
5. amplifier board. Board length 800 millimeters;
6. cross boards in the amount of 2 pieces. Needed to reinforce the seats;
7. elements of the amplifier structure of the table. The length of the elements is 960 millimeters.

Attention ! It is necessary to strictly follow the dimensions listed below only if the work on the table is made from dried and planed wood.

Manufacturing technology

Sawing out elements of the future design

To do this, you will need a hacksaw or a circular saw. Cutting out the parts is as follows: using a hacksaw or a circular saw, make the required number of parts for the table from boards 4 meters and 6 in size. Based on the above drawing, it is necessary to cut boards 2 meters long, which will be used for table flooring and seating.

Attention ! In order to avoid mistakes when cutting out elements for the sidewalls, it is best to cut them out according to a template that must be made in advance from strong cardboard.

Assembly

After cutting all the structural elements, it is necessary to proceed with their assembly:

• first you need to install the side parts (sidewalls). In order to mount the parts evenly, it is recommended to use a measuring angle;

Attention ! The assembly of the table must be carried out on a perfectly flat surface. This will help prevent distortion of parts.

• after the installation of the sidewalls is completed, you can proceed with the installation of the table legs. To do this, we place the legs at the required angle and lay them on the transverse elements, grabbing the parts with the help of nails. Then, using a pencil or marker, mark the surface in the places where the bolts will be installed. After marking with a drill, it is necessary to drill holes and fix all the parts with bolts;
• then you need to start connecting the side parts and the countertop. This assembly step is best done with an assistant. Have a helper hold the first sidewall before it is secured. You hold the second sidewall yourself. On the upper part of the sidewalls, it is necessary to hoist one of the boards intended for flooring the table and seats. We fix the board with nails. We repeat the same moment of assembly: on the other side of the table we set up a board and nail it;
• Next, we proceed to the installation of the countertop. Before installation, it is necessary to prepare small wedges with which you can leave the same gaps between the elements. Then start fastening the tabletop boards. After the installation of the boards is completed, the wedges can be removed;
• The last step in assembling the table is mounting the amplifiers. We turn the structure upside down and install transverse amplifiers. According to the drawing according to which the assembly was carried out, the amplifiers are installed in the middle of the table top and bench, after which they are nailed. In order for the design to be safe for health, the saw cuts must be sanded. Then it is necessary to install amplifiers that have a figured cutout and repeat the transverse part of the tabletop. Nail them to the countertop and sidewalls.

Treatment

After the assembly of the table is completed, it is necessary to process it using special tools. It is recommended to carry out processing before the start of the assembly process, which will make it possible to more thoroughly coat all elements and protect them.

To give a more attractive appearance to the country table, you can use color or varnish. Lacquer will become an additional means of protecting furniture and increase its service life.

Tables for giving from improvised materials

In addition, you can make a table for a summer residence with your own hands, using simple improvised materials.

For example, what can be done with an ordinary stump? From it you can easily make an original table that will decorate your garden plot. Stumps can be decorated with mosaics, tiles, or other decorative items. It all depends on the creative imagination. You can also make stools for sitting (also from hemp), after decorating them with a mosaic.

If you find an old table in the country, then do not rush to throw it away, because you can give it a second life. Remove old paint from it, decorate the countertop with mosaics, and repaint the legs. Such a table will last for many years and will please the eye.

Tennis table for a summer residence

So that in the country you can occupy yourself with some kind of active sports, you can build a tennis table. Making it is quite simple, you just need to buy the necessary materials and prepare the tools.

Necessary materials:

• 2 sheets of plywood 20 mm thick;
• planed boards in the amount of 2 pieces (3 mm thick and 3 meters long);
• for racks you will need construction goats with supports in the upper part.

The dimensions of the table should be 76 centimeters high, 152 centimeters wide, 274 centimeters long.

Then you need to choose a place to place the table 7 by 5 meters.

Mounting process:

• construction goats must be installed horizontally at the same level;
• after installing the construction goats, it is necessary to lay two boards along the edges of the supports 3 mm thick (the boards are laid along the length of the tennis table). Boards are screwed with self-tapping screws;
• then plywood sheets are laid, which are subsequently fixed with battens.

After that, the countertop must be sanded and coated with several layers of antiseptic.

It is difficult to overestimate the importance of the table, both in terms of domestic comfort and any interior design of an apartment or cottage. Moreover, a kitchen without a table loses its functionality, so the table is deservedly considered a necessary piece of furniture for this room. A huge selection of different models of tables that can be purchased in furniture stores does not detract from the desire of some of us to make a table from the boards with our own hands - according to our own project, with the personality and charm of a valuable handmade item.

The fact that you can choose any model, the shape of the tabletop and dimensions, as long as they are comfortable and suitable for the room in which the table will be installed, gives a special charm to the prospect of making a table with your own hands from the boards.

A few examples below will help you make your choice and help in the manufacture of the model that suits you. In addition, drawings on how to make a simple table from boards will help to more clearly present the future design and assembly processes.

Table 1. Sturdy and stable dining table for home

To make this table, we need tools such as a jigsaw, an electric drill, a screwdriver, a grinder. You can, of course, do without some of the above "helpers" by using a screwdriver and a bar with sandpaper fixed on it - just such a replacement will cause an increase in time and effort spent on making the table.

The material for the manufacture of the countertop is a grooved board, at least 30 mm thick. The tongue provides a tight connection of the boards, increasing the life of the table, since with this method of docking, the likelihood of food residues getting into the gaps between the boards is practically eliminated.

For the manufacture of the remaining elements of the table, an ordinary 50 mm board is taken.

1. Boards, if they are not processed, must be thoroughly sanded - in addition to aesthetic considerations, this is required by elementary safety and practicality: a sanded board is easier to paint, and much less paint is required for such a surface;
2. Cut out the details of the table:

• Tongue-and-groove boards for countertops, 230 cm long - 6 pcs.;
• Spacer board about 170 cm long;
• Bars for fastening the tabletop (their length must match the width of the tabletop, or be slightly less) - 4 pcs.;
• Bars for legs - 4 pcs., 2 pieces of board for their base.

To improve the appearance of the product, saw the ends of the fastening bars at an angle of 45 degrees, carefully cut the tongues of the outer boards, and slightly round the corners of the table top with a jigsaw.

Table 2. The simplest table for a summer house or gazebo

Perhaps there is nothing easier than making this version of the table from the boards with your own hands, shown in photo 5. Table dimensions: 1200x740 mm, height - 750 mm.

For its manufacture you will need:

• Edged board, smoothly planed 40x140 mm;
• 2 bars 40x60x740 mm;
• 8 confirmations 70-75 mm long; self-tapping screws of various lengths;
• Chisel and planer;
• Electric jigsaw, drill with a special drill for konfipmatov, furniture key, grinder.

The first step is to assemble the countertop by fastening the boards with two transverse bars, placing them at a distance of 120 mm from both ends of the future countertop and using self-tapping screws, up to 80-85 mm long (so as not to reach the outer surface of the countertop). If ordinary boards are used, in the manufacture of countertops it is better to leave small, only 10 mm, gaps of the same width between them: through slots will prevent contamination of the countertop with food residues, without interfering with cleaning and without reducing its aesthetic appeal.

To achieve the same width gaps in the countertop, it is necessary during its assembly to lay a centimeter standard made of lath or other solid material between the boards.

Second step: assembling the table legs. On a sheet of chipboard or plywood, we draw a template - a rectangle with sides of 600mm (width) and 690mm (length). First, we make one pair of legs, then the second one in the same way: we lay 2 boards on the template in an X-shape, mark the lines of the upper and lower cuts of the legs, as well as the lines of their intersection - in this place the boards will be fastened together. We saw off the ends of the boards along the marked lines, and at the intersections with a chisel we select recesses 20 mm deep to connect "in half a tree". We fasten the legs with 35 mm self-tapping screws;

Third step- final assembly of the table. The drawing shows in detail how to make this simple table from the boards: thanks to him, the assembly process will not cause difficulties (Figure 6).