TV wall mount: an overview of the brackets and mounting methods. Homemade bracket for mounting the TV on the wall DIY wall mount for the TV

The appearance of LCD and plasma TVs allowed them to be installed not only on traditional bedside tables or bedside tables, but also on walls. The flat screen of such models does not affect the overall interior of the room, and placing the TV on the wall saves a lot of space.

Especially often this advantage of flat screen TVs is used in kitchens, where family members, especially housewives, spend a lot of time. Small conventional devices are attached to the walls. But how to properly fix the TV on the wall - we'll talk about it today.

Choosing a TV bracket

Currently, there are several models of different brackets for TVs of any type on sale: on the wall, in the corner, with different radii of lifting and rotation. The choice of such a bracket is made for a specific TV, since the mounting holes of the bracket and the device may not match. Although manufacturers adhere to common standards, it doesn't hurt to make sure you buy the right bracket for your TV. You still need to consider whether this bracket will support the weight of the device. If the TV is normal and not flat, then this bracket looks like a shelf.

Mount the TV with the bracket

TV installation work must be carried out together, even if they are small. It should be noted that if the material of the walls is such, it is better not to take risks, but to choose another place. And if you install it on such a wall, then the weight of the TV with the bracket should not exceed 20 kg. For an ordinary small TV, the stand mounting location is easy to find. The apartment is a little more difficult. Here it is necessary to take into account the limits of horizontal and vertical rotation of the TV. This is especially important if the attachment site is selected or close to it.

It's best to start by lightly screwing the bracket to the TV (bait). Then you need to select the position of the device both vertically and horizontally. After choosing a location, attach the TV to the wall so that the bracket rests on it. Have one person hold the handle while the other tries to turn it. Thus, the best option for mounting the bracket is chosen, it remains only to put a place for it on the wall. Then you need to remove the equipment from the TV, attach it to the wall in accordance with the markers and put it on the map of the place.

Installing the TV on the wall is not difficult and takes some time. At the same time, this event requires little skill and knowledge, otherwise the device will not be able to freeze for a long time. Next, we will look at step-by-step instructions on how to install the screen on the wall with your own hands, as well as mistakes that should not be made.

Advantages and disadvantages of the wall version

In today's world, manufacturers of plasma, LCD and LED screens are trying to minimize the size of their products. This is because compactness saves space, creating a more spacious interior. In addition, a flat screen can be an indoor attraction that decorates walls in both modern and retro styles. The photo shows one of the options for the original design of the TV on the wall:

Another advantage of mounting the TV on the wall is that the equipment is less prone to mechanical damage if it is suspended at least half a meter from the floor.

As for the disadvantages, they may look like this:

• an incorrectly installed bracket can cause the screen to fall to the floor, which will lead to complete failure;
• this installation option takes more time and is performed with a partner (if the diagonal and weight are large enough);
• there is a restriction in the placement area: it is forbidden to install the TV on heating devices and on weak walls (for example, on a windowsill if the device weighs more than 35 kg).

However, the idea of ​​placing walls is very popular and does not cause any problems if you follow the instructions during the installation work.

Detailed hanging instructions

To make the material more clear, we give step-by-step instructions for installing a TV on the wall with your own hands:

Select the position height. To do this, sit on a sofa (or chair) and select the most suitable viewing area. As a rule, in the kitchen, the installation of a wall-mounted TV is carried out under the ceiling. This is due to the fact that when cooking, paying attention to the image is not so drawn, but the music or voice from the message is more important. As for the bedroom and hallway, it is recommended to install the screen about one meter above the floor, which is the optimal value for comfortable viewing.
We mark the wall. You will need a simple pencil, a building level and a tape measure. Based on the specified distance between the handles, mark the points on the wall as shown in the photo. Be sure to check the horizontal holes in the future, because even a small deviation can cause the screen to fall.

Using a drill, we drill holes in the indicated places. In order not to fall on the electrical installation under the finish, use. This device will also help you find the profile under the drywall (it must be drilled when installing the TV on the wall).

We drive into the dowels and fix the brackets. If the wall is concrete, there will be no problems. You have to be very careful with drywall, and if you have any doubts about whether the structure can withstand this technique, then it is better to refuse this installation option. You also need to attach the guides from the bracket to the corresponding holes on the TV.

After completing the installation of the TV bracket, we prepare the screen and carefully install it into the rails (or screw it if we use this mounting method).

Now it remains to properly connect the wall-mounted TV to the network and enjoy watching. Please note that it is better to hide all the wires in a plastic cable channel so as not to spoil the interior of the room. To hide the wires, move the connectors on the screen. We discussed this after installation in a separate article.

This is all technology for installing a TV on the wall yourself. At first glance, everything is simple, but there are still many nuances that need to be considered. We will talk about them further, and now we strongly recommend that you check out the visual instructions:

Video tutorial on how to install a TV on a concrete wall

An illustrative example of mounting on wooden panels

To ensure that the equipment can be used for a long time without falling off the wall, we recommend that you follow the installation instructions for the wall-mounted TV:

1. When buying brackets (usually not included), check with the seller what the diagonal and weight of the device are intended for.
2. A permanent installation is much more reliable than a tilt, although it reduces viewing comfort.
3. If you choose to mount your TV in a plaster niche (which is trendy these days), consider allowing air to circulate, otherwise the cabinet will overheat and cause serious damage over time.
4. The hanging screen can be insulated in a plasterboard stand. To take a long time, so the security is greatly increased.
5. Do not place the screen above a fireplace or other type of heater. Radiated heat also negatively affects the performance and life of the equipment.
6. First you need to securely hang the TV on the wall, and then connect all the cables. Please note that if the brackets are rotatable, the cables must be long enough to rotate the screen in both directions (without tension).
7. The optimal distance from the screen to the display area should be 3 to 4 diagonals.

Modern LED and LCD TVs are significantly superior to their predecessors in terms of electron beam, not only in terms of technical parameters, but also in size. The new models are much wider but have little depth. For this reason, the TV panel can be placed not only on a table or bedside table, but also on the wall. But you must understand how to properly hang the TV on the wall to ensure comfortable viewing, eye safety, and protect the device from accidental dropping.

Rules for hanging a TV on the wall

To mount the TV on the wall, you need to follow a few simple rules - purchase a VESA compatible bracket, correctly calculate the optimal height from the floor, and the angle of rotation of the panel etc

In the process of technological development, televisions have acquired a flat shape and have become similar to photographs. Therefore, you can hang TVs on the wall. VESA (Electronic Standards Association) has set uniform standards that TV manufacturers must follow, be it LG, Samsung, Sony Bravia or another company. They refer to the distance between the mounting holes on the back of the TV and the diameter of their threads.

The basic principles of the VESA standards regarding the installation of TV panels are as follows:

• in order to be able to install it on the wall of any device, 4 threaded holes must be made on its back side;
• the thread used must have one of the standards, such as M4, M6, M8;
• the location of the holes in most cases should be symmetrical with respect to the center of the TV and form a rectangle or square;
• the distances between the holes are also adjustable - they are multiples of 100 mm (for example, 100 × 100, where the first number is the width, the second is the height).

Advice! You can find out which VESA standard corresponds to a specific TV model in the device's instruction manual. But the same information is easily obtained with any measuring device, such as a ruler.

VESA standards are usually associated with TV sizes. The most popular diagonals are shown in the table below.

However, there may be exceptions related to the specifications of a particular model. Therefore, before choosing a TV wall mount, you have to find out what distance separates the holes behind.

Attention! Fasteners that meet all three standards are usually attached to the bracket. The screws are attached in different lengths, so they will have to be bought separately only in very rare and non-standard cases. In addition, the package usually includes a cable holder, as well as a drilling template that simplifies the installation of the TV.

Distance from the floor

An important factor to consider when hanging your TV is the height above the floor. The comfort of the viewer and the safety of the eyes depend on the choice of this distance., This setting is variable and depends on where the TV equipment is installed.

So when mounting the TV panel on the wall in the hall or in the living room, the lower edge of the screen should be at a distance of 0.75-1.5 meters from the floor level. According to doctors, in order to understand at what level the TV should hang, you need to sit on the observation post, close your eyes and open them after a few minutes. The center of the screen should be where the eye falls. If the living room is large, the panel should be located low above the floor for greater convenience for all family members.

In the bedroom the TV is just above the floor. The location is determined in the same way as in the room, he just does not sit, but lies on the bed.

It is important! When installing the TV panel, remember that the angle from the center of the screen to the human eye should not exceed 30° to avoid spinal deformity.

Fittings suitable for adjusting the tilt of the screen are suitable for installing a TV in the bedroom.

In the kitchen the TV is usually mounted at a height, so when cooking (usually standing) the center of the screen is at eye level, providing a comfortable viewing experience. It is better to choose a handle with adjustable tilt and swivel to comfortably watch movies from anywhere in the room, as well as sit at the table.

Ergonomics, swivel, tilt

The ability to adjust the TV horizontally and vertically brings additional benefits to the viewer.

Adjustment function

The Pivot function is used in many TV models. Allows you to rotate the screen in portrait (90°) mode. This feature may be of interest when viewing photos or other images. With special device brackets can rotate 360° and fix the position.

Distance from wall

When choosing a bracket, consider the distance to the wall. If sockets don't bother you, you don't need to rotate or tilt your screen, and you don't need to access sockets on the back or side of your TV, you can buy a very slim bracket that sits just 35mm from the wall of the unit. It should be understood that a more functional pen (vicissitudes) will be purchased, the thicker it will be, which is the distance from the wall magnification.

Dependence of the bracket on the size of the TV panel

When choosing a bracket model consider recommendations across the TV. An assembly that is too long can protrude from the top or bottom of the TV panel, making it look ugly. And if a TV technician is more than recommended for a particular bracket type, there is a great risk of falling or breaking the functionality of the bracket.

TV weight

If you are going to mount a TV, you need to consider its weight.

It is important! Consider not only the permissible load on the bracket, but also the material of the walls. If there is concrete or brick, there will be no problem, but you must hang the TV on a drywall wall with the utmost care to prevent the television equipment from falling.

Mounting functions

There are three similar mounting options with a bracket: rigid, swivel, inclined. But you can hang the TV directly on the wall.

The algorithm is suspended on a rigid stand

To attach a hard bracket, follow these steps:

• determine the installation height of the panel, then arm yourself with a template attached to the handle, mark future holes;
• make sure there is no hidden wiring in the wall and drill holes;
• drive pin;

• attach the bracket to the wall;
• attach the guides to the TV case;
• hang the TV panel on the bracket.

Advice! If the bracket is inseparable, then it is mounted on the TV, and then on a peg in the wall.

Hanging on an inclined bracket

The tilt bracket is installed in the same way. First you need to choose the right place. make sure that nothing prevents you from freely tilting the TV, mark with a pattern and make holes. Hammer the dowel, attach the bracket. Install the rails, hang the TV panel. Select the desired angle of inclination, secure the equipment in the desired position.

rotary knob

The swivel mount is the same as the previous cases. But first you must choose the right place and make sure that turning the device to the left or right does not interfere with furniture or other objects. Then attach the bracket to the wall and hang the TV. If the handle is significantly retracted from the wall, then decorative strips should be installed, which are usually attached.

How to hang without a bracket

TVs larger than 42 inches sometimes hang without a bracket. To do this, there are special grooves on the back side, with the help of which the TV is hung on a socket installed on the wall in the factory, just like a mirror or a photograph. Just consider the weight of the TV panel and make sure the handle will hold up.

Making braces at home

The simplest handle can be handcrafted from a variety of scrap materials available to every home crafter.

Manufacture of kitchen furniture slats

For a simple fixed bracket, you will need a mounting rail to hang your kitchen cabinets and fittings. You will also need tools such as a drill, hacksaw, screwdriver, level, and tape measure.

The procedure is as follows:

• according to the holes on the back of the device, measure and cut the rod to the required length;
• if the holes in the guide do not match the television holes, then new ones must be drilled at the required distance;
• according to the dimensions of the first rail, cut the second rail to be installed on the wall;
• screw the bracket to the car;
• mark for mounting the strap on the wall, mark and make holes for the dowels;
• attach the board to the wall;
• insert the guide installed on the TV panel into the groove of the wall guide.

Advice! To make the TV panel more secure, you can attach it to another pair of slats.

Making wooden boards

If you want to hang a small wall-mounted TV on the wall, you can install the DIY bracket in section of wooden planks from 3 to 10 cm. In addition, you will need 4 hanging hooks, 4 self-tapping screws and screws. You will also need tools such as a pencil, hand saw, tape measure, and drill. The algorithm looks like this:

• cut the rod into two parts equal to the length of the television panel;
• take two head ring bolts and tighten them to the left and right of one of the ends of the rail, then repeat these steps with the other part;
• make holes in the slats, fix them on the TV;
• mark and make holes in the wall according to the rings in the planks and screw on the hooks for hanging;
• hang the TV by attaching the rings to the hooks.

Advice! Thanks to this self-supporting stand, the TV can be tilted slightly, so the bottom bar should be 1-2 cm thinner.

Fixing to plasterboard wall

The device should be hung on a plasterboard wall with the utmost care so that the device does not fall. To do this, it is recommended to choose a bracket that can be fixed not with 4 screws, but with 6, in order to get the best result. To secure the handle as tightly as possible, you need find the metal profile on which the drywall was installed, and attach special butterflies to it.

In any business, as well as when hanging a TV on the wall, there are some nuances that experienced craftsmen pay attention to.

1. Before drilling the walls, mark the holes correctly. To do this, use the template attached to the parentheses, as well as the level so that the line is straight.
2. Some TV panel mounts can be aligned even after wall mounting.
3. Accessories for wall-mounted TVs will be an interesting solution. For example, LED lighting not only looks beautiful, but also reduces contrast and eye fatigue.
4. The cable can be hidden in an empty space on a drywall wall, on an adjacent plinth, or to cover a cable duct.

So, hanging a TV on the wall of the house is very simple. Choose the right stand based on the size and weight of your TV, as well as the ability to tilt and swivel the device. Then determine the installation location and pause the installation based on installation and assembly recommendations.

Popular TVs from customers

TV LG 43UK6200 on the Yandex market

TV Sony KD-55XF9005 on the Yandex market

TV LG 49UK6200 on the Yandex market

TV Sony KD-65XF9005 on the Yandex market

TV LG OLED55C8 on the Yandex market

One of the options for placing flat-panel TVs is wall mounting. This solution saves space and everything looks stylish and modern. But factory brackets, despite their great functionality, have one drawback - inflated costs. Because the interlock pattern is simple, it can be made independently of all available materials. Let's take a closer look at how to do this.

Basic requirements for TV installation

Most TVs in production use a VESA mount. Based on typical hole spacing (in millimeters), various mounting modules are available. Usually these are four attachment points, which are located on the rear panel. The quad VESA circuitry is in the shape of a rectangle or slightly elongated rectangle. Conventional mounting screws can now be installed at mounting points. If they are not there, they are in a separate package or with other components.

TV repair, which is especially important for expensive branded models, is impossible for non-standard mounts. Therefore, the screw heads are often designed as a special tool, and the holes are filled with soft plastic. In such cases, the product must be installed on the factory bracket by a certified technician. Without his mark on the warranty card on the work performed, all warranty obligations will be canceled!

When installing dowels on standard walls of standard brackets, it is recommended to choose steel, at least propylene. For walls made of foam block and cinder block - only propylene. Screws with a diameter of 4 mm or the same as the first digit of the screen diagonal size (in inches). The depth of the screw in the load-bearing wall without coating thickness should be:

• for concrete walls - 10 mm plus a diagonal in centimeters;
• for brick walls - 30 mm plus diagonal size;
• for foam block walls - 50 mm plus diagonal size.

The above requirements do not apply to plasterboard walls, as they do not have good bearing capacity. If the sheets fit snugly against the main wall, then the installation is carried out directly on the wall. Then under the diameter of the dowel head in the holes of wells of a suitable diameter. And after inserting the steel rod spacer on the dowel, install the hex socket wrench, knocking it down with a hammer, lower it before planting.

If the drywall sheets are attached to the frame and the sheathing is less than 12mm thick, then you need to look elsewhere or mount the TV on a cabinet. The only possible option is if you know the position of the frame that can be used to mount the bracket.

Wall brackets have been refurbished

One of the most common designs is the fixed bracket. The mounting system is very simple, but you can't tilt it, rotate the screen. A fixed TV wall mount simply attaches and can be made from any inexpensive or readily available parts.

Consider the production of fasteners from wood. Main materials:

• two wooden boards;
• self-tapping screws with a ring;
• plastic hooks and dowels.

We take two wooden boards, they are of the best quality. The length of the strips should exceed the length of the back wall of the flat TV housing by 10-15 centimeters. To make the screen tilt at a slight angle, take the top bar a little thicker than the bottom. Two ring bolts are attached to the top edge of each of the slats.

We attach the strips to the back of the TV using bolts screwed into special holes. One bar at the top and one at the bottom. We measure the horizontal and vertical distances between the rings and then transfer them to the wall. We get anchor points. We drill holes in them, mount the dowels with hooks and hang the product on them.

This wall mount is easy to make and very secure. Suitable for models with a screen diagonal of more than 26 inches.

Let's look at another simple option for making a fixed wall bracket. Diagonal assembly of a small product will be carried out on aluminum corners and a bicycle needle. Corners can be taken from steel, but since the load on the fastener is low and steel is difficult to machine, aluminum is preferred.

Main materials:

• four aluminum corners;
• one bicycle needle 2 mm thick;
• screws, bolts, plastic plugs.

The installation location of the flat screen TV, the size of the pins and holes are selected individually, taking into account their dimensions. Two corners with two drilled holes are attached to the back cover with screws. The other two are on the wall with screws. To do this, place them on the wall and mark the hole for the dowel on the wall. Fasteners are better suited for carrying plastic pins. To connect the corners together at the top of each, drill one hole.

It is desirable that one pair fit into the other, so the distance between the corners attached to the wall is less than a few millimeters, less than the distance between the corners of the TV. By connecting them, the TV will be attached to the wall. We open the holes drilled in the upper side plane of each corner in one line, and we pass through them with a bicycle needle.

The needle holds the product in a vertical plane, and the corners inserted into each other prevent its involuntary displacement in the horizontal plane. If the TV needs to be removed from the wall, remove the spokes and the connection will be disconnected.

Despite the small diameter, the heat-treated bicycle spoke can easily support the weight of small models. But heavier ones require larger diameter spikes!

Rotating structures - more freedom of action

Rotating designs provide more freedom of action: turning the screen in the right direction, approaching it. Some types of designs adjust the vertical angle of the screen, which is necessary when the product is suspended high. Therefore, the swivel TV wall mount provides a comfortable view from anywhere in the room.

Main materials:

• two metal plates;
• square section of the pipe;
• connecting bolts, screws, dowels.

Take two metal plates to make a slanted handle. The larger the diagonal of the TV and the greater its weight, the larger the size of the plate that you need to take. For small models, we take two boards measuring 20 x 20 cm and a few millimeters thick. We will attach one to the wall and the other to the back panel. We install two metal corners on each plate.

In order for the handle to have sufficient freedom of movement in any direction, we place a piece of pipe between the corners. But it is better to use a square profile 2x2 cm, because it will be more convenient to fix it, install it on the plane.

A piece of pipe is located between two corners and is connected to each other by a long screw. Then attach to the plate. The pipe (profile) must rotate freely and not touch the plate.

The corners are attached to the wall panel at corners parallel to the floor. This will allow you to change the angle of the TV to the right or left. And the corners on the plate mounted on the back panel are perpendicular to the floor. This will allow you to adjust the angle of inclination.

To increase the mobility of the system, instead of one pipe section, it is better to use two pipes connected by a long screw. This will allow you to enlarge or reduce the screen, adjust the distance from the wall.

Thus, we can make any type of bracket with our own hands. Does not require special knowledge, and material costs are minimal. Having shown your imagination, you can improve the appearance and make it more interesting, individual. Paint in a color that goes well with the interior of the room. At the end of your work, you can comfortably watch your favorite programs and TV programs!

When you buy a plasma or LCD screen, you are asked where it is located. For most interior design ideas, place this unit on the wall. However, many people do not know how to choose a place, the right height, a location in an apartment or a private house. Which mount to choose or make yourself

The TV can be installed at any height!

Placing a TV on the wall clearly has its pros and cons. Everything will depend on its size, the size of the room, the presence of children. You must read them before making a decision.

Benefits:

1. Convenience. The TV can be installed at any height without the need to find or set the most suitable position.
2. Space saving. No additional cabinets, cupboards, shelves - saves space in the room.
3. Modern look. The TV hanging on the wall represents the latest style. Most interior designs have this location in mind.
4. Safety for children. Children should not accidentally drop a heavy device by pulling on the cord or moving the stand. And if you hide behind a screen hanging on the wall
5. sockets, you can protect your child from possible electric shock.
6. Saving. Installation is much cheaper than a separate cabinet.

Disadvantages:

1. Departure point. If the nest is far from the attachment point, it will need to be carried, which means decent work. Otherwise, you will need an extension cord, which, without an interesting design, will simply hang most of the room, thereby spoiling the look of the interior.
2. It is necessary to create an additional shelf to accommodate the adjacent decoder, WiFi receiver, portable hard drive.

If hanging TVs get in the way, you might want to consider some kind of recess in the wall or, conversely, an external frame.

How to hang a TV on the wall

Choose the right place to install your TV

After receiving the plasma and mounting it on the wall, it must be properly adjusted. Comfort, convenience for all passengers, safety and interior design depend on the choice of height and space on a vertical surface.

Choosing the right suspension location

The location is chosen according to some rules:

1. Before choosing a point where the screen will be repaired, you need to take care of the power source. The socket(s) should preferably be located behind or directly below the appliance. In the second case, it will be possible to connect audio equipment without problems.
2. Do not choose a seat in front of a window. In this case, street light distorts the image and even shines. Secondly, the ultraviolet radiation of the sun has a negative effect on plasma screens.
3. If there is no space in the room, the best solution is to place the TV in a corner or in an open cabinet. The second option protects children and the device from themselves.
4. Basically, the choice depends on where you are viewing from.
   You can't hang a TV over a fireplace. This can lead to the rapid destruction of the device.

Selecting the optimal TV installation height

In terms of height, it all depends on what room the screen is in.

In the kitchen, the height of the location is selected depending on the height and a slight deviation above or below. The easiest option is to stand near the gas stove or cutting surface, and also look at the selected wall. At what level the gaze stopped - there is an optimal height.

In the living room, the height of the seat is selected depending on the sitting position. In this case, the optimum level is 120 cm from the floor surface. With this choice, the cervical regions and eyes in a sitting position do not strain.

The bedroom is the main part of the view. As a result, much depends on the type and size of the bed. To find out the approximate height, you need to take a comfortable position, relax and close your eyes. After opening your eyes, determine the point at which your vision has changed. This is the optimal height. When viewing the body and eyes should not weigh.

The main types of TV mounts

The adjustable handle is the most comfortable!

To securely attach the plasma to the wall, you need to buy a special bracket. It's called a parenthesis.

There are several types of fasteners:

• repaired;
• diagonals;
• inclined and rotary;
• retractable;
• ceiling.

The main differences between these types are the ability to adjust, design, appearance.

Fixed bracket
A fixed bracket is the easiest way to keep your TV on a vertical surface. Due to the lack of moving parts, it is impossible to set the horizontal and vertical position of the TV. For the same reason, the reliability of all projects increases. Another feature of the fixed bracket is its low cost.

tilt bracket
This type of mounting means that the angle of the TV can be changed. This is a good option for a high device location and for changing the viewing distance. However, it is not possible to rotate the TV horizontally.

swivel bracket
This type of mounting allows you to change the position of the screen in both vertical and horizontal positions, which is a big plus for large rooms. The disadvantage is inconvenient design and high price.

Retractable bracket
Multifunctional mounting type. In addition to the ability to change the horizontal and vertical tilt of the TV, the screen can be moved away from the wall. A good solution if the point from which it will be viewed changes frequently. Not suitable for small rooms. It has a high cost and large size.

Ceiling bracket
Designed for rooms with high ceilings. You can rotate the TV 360 degrees, change the vertical tilt 90 degrees. This pen is often used in public places (cafes, bars, restaurants, clubs, schools, universities, various companies).

First of all, before buying, you should ask about the availability of a designer guarantee, and secondly, it should be borne in mind that the bracket must withstand 5-10 kg more than the weight of the TV itself. It is also necessary to check the complete set so that during installation there are no problems with something missing.

You might want to buy a controlled console if you want to fix a very large screen. You will have to pay much more, but there will be no inconvenience associated with changing the tilt and turn.

Some bracket models are equipped with a cable box. This addition will help hide hanging wires and preserve the interior. Additional shelves and accessory holders are also available.

A thorough inspection of the properties, material, equipment, the risk of choosing a low-quality model is much lower.

Ways to mount the TV on the wall without a bracket

Hanging a TV on the wall with a bracket is a simple task. However, without the purchase of such a project, the task remains feasible. But with this type of installation, there are special features.

Before you learn how to properly hang a TV on a wall without a bracket, you need to figure out which screens can be hung without one.

Only such liquid and plasma screens are suitable for such a procedure. Before installation, check the quality and integrity of the wall. Only small TVs can be hung without a bracket. Some models have special holes for wall mounting without special tools. If there are any, hanging the device will be no more difficult than a photograph or a photograph in a frame. However, the screen size of such models is limited to 24 inches.

If the wall is in good condition, you can try to secure the TV with a metal plate and long screws.

Main stages:

1. First you need to determine the distance between the mounting holes behind the TV. Then you need to buy a metal plate and make it 4 cm longer than the measured distance.
2. Then place a mark on the label where the mounting screws pass through the wall to the TV.
3. The next step is to drill the wall and slab. When the holes are ready, you can fix the screen. The holes in the plate are connected to the brackets on the back of the TV and screwed on. Then the screws are pressed into the wall and fixed on the other side.
   This is the easiest way to attach a plasma to a wall without using a bracket.

TV holder

Main metal pipe support!

Another option for mounting a screen on a wall is to create it yourself from improvised means. The stand-alone bracket can be made from various materials (wood, plastic, metal).

With mounting rail

This type of suspension is characterized by low price and reliability.

For installation you will need: a rail, a puncher, construction tape, a metal or Bulgarian saw, dowels (the best option is butterflies from dowels), screwdrivers, a plank.

When choosing a mounting rail, pay attention to the quality of the metal and its thickness.

Installation steps:

1. First of all, measure the distance between the mounting holes on the TV and cut the guide according to this data. If the holes on the guide and on the screen do not match, you need to make them.
2. The next step is to mark the second mounting rail that will be attached to the wall.
3. When the homemade fasteners are ready, you need to drill the wall and attach the second rail to it. The first one must be installed on the TV. Then connect the slats together in the groove.

To ensure reliability, you can increase the number of rails.

From wooden planks

With this type of mount, you cannot count on a large device weight. However, this is the easiest and cheapest option.

This will require: wooden slats (minimum 2), metal clamping rings (4 pcs.), Wooden saws, puncher, metal hooks and dowels. You still need a measuring tool.

Installation steps:

1. Wooden slats should be equal to the length of the TV. To adjust the slope, you can change the thickness of the bottom and top slabs. At the ends of the rails on top, tighten the screws with rings.
2. Then you need to put the brackets on the TV in a horizontal position. To do this, install the screws.
3. The next step is to mark the holes on the wall for mounting the hook. When the punch is done, you need to attach the hooks and hang it in the TV niche.

It is better not to try to make yourself a tilt-and-tilt or retractable brace. Proper assembly of moving parts requires additional knowledge and skills.
TV installation is better for production together. Much more convenient and reliable.

Modern TVs are lightweight. This allows you to place them not only on the bedside tables, but also to attach to the wall. It is much more convenient and expands their functionality.

For fixing, use special wall brackets for the TV, which, if desired, can be made by hand. But first, you should learn the nuances of choosing a suitable place and making TV brackets with your own hands.

To place the TV on the wall, first of all, you need to create the most comfortable conditions for viewing. In this case, it is necessary to take into account the safety of all household members.

The location of the device on the wall will largely depend on the placement of furniture in the selected room. It is necessary to roughly imagine from what point the household will look at the monitor. In most cases, this is a sofa and armchairs.

There should be no interference on a straight line between a person and a TV, otherwise viewing can hardly be called comfortable.

The next thing to think about when determining a suitable location is a window. If it is located on the opposite wall from the monitor, it will create strong glare - the screen will be almost invisible. For this reason, it is advisable to choose another place for TV, where the sun's rays do not fall.
If this is not possible, then the best way out of this situation is to buy tight-closing curtains or window shutters.

To prevent the sun from penetrating indoors during viewing, it is necessary to select materials in the Blackout style - it practically does not let in light, which will make viewing more comfortable.

You also need to consider how often you will have to close windows, including the device. If there are real moviegoers at home who spend a lot of time in front of the monitor, it is advisable to buy curtains with an electric curtain rod.

They can be controlled remotely with a remote control. This is not a very expensive purchase and this option will add comfort when viewing.

Optimal suspension height

Having decided on the place, you need to choose the correct distance from the floor at which the TV will hang.

The parameters will be slightly different depending on the choice of room:

1. Hall. In the living room, people often receive guests and relatives, hold various family events, or simply relax alone with their families. In any case, this is a place where a lot of people gather, and therefore they look at the monitor from different points: the sofa usually stands immediately opposite the screen, chairs are located on the sides, and a desk can stand even further away. Conventionally, we can say that the middle of the screen should be located at a distance of 70 to 175 cm from the floor level. Usually the TV hangs at a distance of 1.2-1.4 m. When choosing a placement height, it should be borne in mind that the heads of the household should not be tilted forward or backward, as this creates a load on the cervical region, which leads to the spread of osteochondrosis. Opposite the human eye should be only the center of the monitor, or at least its upper third.
2. Bedroom. The ideal place to place the device in the bedroom is directly opposite the bed. So it will be convenient to look reclining. The center of the screen should still be in front of the person's eyes, but the angle of the screen should be changed to 30 degrees. Thus, a direct view will be created from a half-sitting or lying position. You can experiment and try different positions. If discomfort is felt, then lower or raise the device.
3. Kitchen area. Small TV units are often mounted to the wall in the kitchen area. Considering the peculiarities of this space, it should be noted that a person who is in the kitchen while cooking listens to TV more than watches it. But at the same time, the screen should be visible in any part of the room, especially from the side of the stove, where the hostess is most of the time. For this reason, the TV should be located as close to the ceiling as possible. Fixation should be carried out with a swivel bracket. Also, experts do not recommend placing the TV near kitchen cabinets - the risk of damaging the screen with a door or an object that has fallen from the stand increases. Additional conditions: the device is not placed near the stove or sink. Otherwise, the device may be easily damaged by hot air or water.

Having decided on the place and distance from the floor, it will be useful to learn how to make a bracket.

We make a bracket with our own hands

If you do not want to purchase a special TV bracket in the store, you can make it yourself according to the scheme:

1. To assemble the contraction, you will need four corners made of aluminum or other durable material. Do-it-yourself TV bracket will be made from them. You also need to find 1 bicycle spoke, which will be used as an additional mount. It is advisable to look for a corner made of aluminum, since it is much easier to process than other metals. The dimensions are not so important, the main thing is that they exactly match the holes located on the body of the device and on the corner itself.
2. 2 holes are made in the details to attach the iron to the TV through them.
3. One hole is also made in the upper part, where the knitting needle will be placed to better fix the TV to the wall.
4. We connect the finished parts to the TV case with M4 bolts. The remaining pair is securely mounted to the wall (after pre-drilling - 2 holes for bolts, 1 on top for the knitting needle).
5. Each of the holes made must be ideally located opposite each other so that the device is securely mounted without distortion.
6. Once all the details are prepared, you can mount the TV device on the wall. To do this, the TV is lifted and combined with the mounts. Next, the needle is inserted. If there are no bicycle spokes, it can be replaced with a regular nail. The larger the TV, the thicker the nail should be.

Making wall mounts and do-it-yourself installation is finished. To simplify assembly, it is advisable for yourself to draw up a drawing with exact dimensions on paper, so that you can then navigate along it.

Difficulties arise when the TV is to be mounted to a drywall wall. This is an extremely fragile building material that may not withstand the load if not properly fixed.

Experts advise in this case to apply the following types of installation:

1. With the help of a butterfly dowel, provided that the TV weighs no more than 15 kg. This is a 42" unit. Otherwise, the wall will crumble after a short period of time.
2. Using a magnet, find the screws holding the drywall to the track. After that, you can hang a home-made or purchased bracket to a metal profile that is behind a sheet wall.

If there is any doubt that the drywall will support the weight of the TV set, then it is advisable not to risk it and fix it to the ceiling through the holder.

How to hang a TV on the wall without a bracket

When installing the TV on a wall without a bracket, care must be taken to leave a small distance of a few cm between the wall and the TV unit (most instructions do not indicate this, and therefore you should not forget about it). Thus, ventilation will be created and the TV will not overheat during operation.

Instruction:

1. In a hardware store, buy metal corners, anchors and metal plates.
2. The plates should be 4 mm thick - ideal for making a frame that fits exactly the size of the TV device.
3. In the back of the TV (after removing it), make holes for the grooves where the bolts will fit. The diameter depends on the thread of the purchased bolts.
4. Four corners are bolted to the frame.
5. We fix the resulting design to the TV panel.
6. We securely fasten four corners to the wall with the same distance between the corners that are on the TV panel. The metal corners are already pre-drilled (3) to make it easier to select the desired position.
7. The corners are fastened together with bolts and nuts.

It remains to check the reliability of fastening. If the TV set does not stagger on the holders, then it is well installed. If in doubt, it is better to remove the TV and fix the anchors more securely in the wall. Otherwise, there is a risk of overturning expensive equipment.

How a plasma screen or LCD TV is installed has a lot to do with viewing pleasure. The most convenient way to comfortably watch programs and movies on the big screen is to mount the TV on the wall. Factory-made ready-made brackets are unreasonably expensive, especially for large-screen TVs, so the most rational way is to make a wall-mounted TV bracket yourself. Not inferior to ready-made counterparts in strength and reliability, a home-made bracket will allow you to hang the screen in the most convenient position for you, and if you have the tools and follow simple rules, the whole process from the beginning of manufacturing the bracket to mounting the TV on the wall will take only a couple of hours.

When choosing where to mount your TV, consider the angle of light, the amount of space below the screen to accommodate auxiliary equipment, access to electricity, and the arrangement of furniture in the room. The best would be to place the screen at the eye level of sitting people - in this case, you can use a TV bracket on the wall without tilting. If the TV will hang high or be placed in a corner, then it is worth considering the possibility of tilting the screen in relation to the wall surface vertically or horizontally. Mobile movable arm will make the TV more convenient and adaptable to the "viewing" needs of all family members.

Prefabricated TV Wall Mount

We will need:

• black paint on metal
• tassel,
• two square plates measuring 20 by 20 cm with a thickness of about 1 cm made of plastic, metal or plywood,
• 4 25 mm corners,
• metal pipe with a square section of 2 by 2 cm,
• dowels,
• drill,
• long and short bolts
• nuts,
• washers,
• hacksaw for metal.

In one plate in the corners we make 4 holes with a drill for attaching the bracket to the wall. In the second plate, we drill holes according to the location of the mounts on the back of the TV. We cut the pipe into three segments. The first one will be attached to the wall bracket holder, the second one will connect the parts, the third one will be attached to the holder plate on the TV. The length of the segments is chosen arbitrarily. We paint all the details with paint, leave to dry.

We screw the corners symmetrically into the center of each plate so that the pipe placed between them can move freely. We fix each corner with two bolts. On the wall plate we place the corners horizontally, on the TV plate - vertically to adjust the angle of the screen. We fasten the pipe segments between the corners with a long bolt, placing additional washers between the pipe and the corner. We place the central section of the pipe from below between the pipes of the fasteners, connect with long bolts. We fix the plates with fixed pipes to the wall with dowels and bolts, then we fix the bracket to the TV, set the desired angle of inclination and rotation, tighten the nuts on the mounts.

Simple and inexpensive TV wall bracket

We will need:

• a rail for attaching wall-mounted kitchen cabinets (you can buy it in a store or on the market),
• drill,
• dowels,
• screws,
• bolts,
• tape measure and level for marking the wall mount.

We measure the length of the rail for mounting to the TV, break it off along the notch, if necessary, drill additional holes in the rail if the factory ones do not match the TV mounts. For the wall part of the bracket, we break off a rail of the same length. We fix the rail to the TV with bolts. We mark the location of the rail on the wall, drill holes for dowels, fasten the rail with screws. We install the TV, making sure that the grooves in the rails match. This wall mount TV mount will provide maximum adhesion to the surface. If desired, the screen can be moved to the side by moving the TV along the wall rail. If it is not possible to buy a rail, for a small TV you can replace it with wooden planks, in which the contact surfaces will be sawn at an angle to each other, forming a strong gap. This TV wall mount design is suitable for models with a small screen size and light weight.

Wooden wall tv bracket

We will need:

• a wooden plank 2-3 cm thick and about 7-10 cm wide,
• saw, 4 self-tapping screws with a ring head,
• bolts,
• hanging hooks,
• drill.

We cut the bar into two identical lengths 15 cm longer than the back of the TV. We screw self-tapping screws with rings at a symmetrical distance from the edge into the upper end of each plank. We drill holes in the slats for mounting bolts, fasten both slats to the TV panel. On the wall we mark the location of the hanging hooks according to the placement of the self-tapping rings. We drill holes in the wall, insert hooks. We hang the TV on the wall. This bracket is suitable for large screen TVs. In order for the screen to be located at an angle to the wall, you can take strips of different thicknesses - the top one should be 2 cm thicker than the bottom one. In this case, the TV can be fixed at a higher level than usual.

With a large diagonal of the monitor, it is quite difficult to install it in a room so that other furniture does not interfere. This problem is most often solved by attaching the TV to the wall, where there is free space.

Choosing a place to hang the TV

Manufacturers of mounts produce many varieties of brackets:

• ceiling, with fastening to floor ceilings;
• wall-mounted, with the possibility of fixing on the vertical architectural elements of the rooms;
• movable, which allow you to rotate the monitor at the desired angle;
• stationary, without rotary devices.

Unlike legs, on which the device can only be installed on a console-stand, mounting a TV on brackets does not require an additional piece of furniture under the appliances.

Height

You can only set a comfortable monitor height above the floor experimentally. The installation parameter depends on the features of the furniture (back tilt, seat height, etc.) and the owner's preferences to view programs in some position (lying, sitting). The optimal position is selected by placing on an armchair or sofa and determining the point, when looking at which you do not have to strain the muscles of the neck and back. This point roughly corresponds to the center of the screen.

Distance from furniture

Unlike older models of TV receivers, modern flat-panel monitors practically do not heat up, they can be safely installed in plasterboard niches, recesses in furniture walls, placed next to cabinet wooden furniture, leaving only small gaps for air circulation.

The main attention should be paid to the choice of the distance from the screen to the upholstered furniture on which they lie or sit while watching. There are physiological and medical guidelines that the distance from the monitor should increase depending on its size. If not observed, the tension of the eye muscles can cause headache or dizziness.

TV mount types

Hanging brackets are selected after the purchase of the monitor or at the time of purchase. In order not to make a mistake with the choice, you need to determine the distances between the holes for fixing the suspension (on the back of the TV).

For fixed mounting

The fixed screen wall mount consists of brackets to be mounted on vertical surfaces and mating pieces to be mounted on the back of the monitor. You can hang the device on a fixed mounting bar when installed in a furniture wall, above a fireplace, in a niche or between semi-columns, etc. The screen will be located vertically and parallel to the surface on which it is fixed.

Tilt brackets

An inclined wall mount for a TV is a fixed type. The difference from a simple vertical bracket is the presence of an installation plate, which can be fixed both vertically and at a slight angle to the base. This allows you to make viewing more comfortable if the monitor has to be mounted high.

Tilt-and-swivel

Tilt-and-swivel wall mount allows you to freely change the angle and position of the TV in relation to the wall. This mounting option is more convenient than fixed ones. But the installation of this variety requires the presence of free space (about 30 cm from the surface where the movable frame for the TV will be installed). Under the monitor, you can install any furniture that is suitable in height.

The movable TV mount is convenient when placing the panel in a corner. Attach the wall mount plate closer to the joint and turn the rotator bar to a comfortable position. The distance from the corner to the back of the monitor will have to be determined experimentally.

Choice of fasteners for different walls

Any type of mount kit includes self-tapping screws with dowels designed for the load specified in the instructions (the maximum weight of the TV and the mount itself). Installation of the product on these parts will be sufficiently reliable if the conditions specified in the instructions are met: dowel bushings must be inserted into holes drilled in a stone wall (brick, concrete, cinder block, etc.).

When mounting on a wall made of less durable materials, a safe installation can only be carried out taking into account the wall structures.

For drywall

Partitions, false walls, niches made of gypsum boards are characterized by low strength and are unable to hold simple dowels. When hanging a large monitor, the fasteners will simply fly out of their sockets, and the bracket will fall.

To properly and securely fix the bracket with your own hands, use a special kind of dowel inserts - a butterfly. When tightening the self-tapping screw, the movable part of the sleeve straightens to the sides, forming wide petals. They increase the area of ​​\u200b\u200bsupport on the plate under load, evenly distributing it over the fragile GKL. Butterfly dowels allow you to hang the TV receiver in the safest way.

For complete safety, it must be taken into account that the load on the drywall sheet increases if a movable mount is used. When mounting the same monitor on a fixed bar close to the wall, the pressure on the GKL will be minimal. The profiles will also help to ensure the strength of the fastening: if the upper butterflies are screwed into the holes in the metal bar, and not in the plasterboard, then the wall will also withstand the heavy weight of the TV.

For loose and hollow substrates

Infill walls, sandwich panels and similar substrates with non-monolithic internal parts require the use of special dowels with additives that strengthen the bulk material.

The chemical dowel kit includes:

• mesh cylinder-capsule, which will limit the spread of the adhesive in the hollow structure;
• the substance itself, which binds and fixes bulk fillers and a metal bolt that will hold the bracket.

Mounting the TV on weak walls is carried out according to the instructions for the chemical type dowel:

1. Drill and dust a hole in the wall of loose materials.
2. A cylinder and a capsule (ampoule) are placed in it.
3. Screw in the anchor to secure the base of the TV holder.
4. Wait for the time specified by the manufacturer, during which the glue must completely harden.
5. After that, the monitor is mounted on the bracket.

For thin walls

Thin partitions made of materials with sufficient bearing strength (plank, brick, etc.) do not withstand the increased load at the points of attachment of studs or bolts. You can securely install the bracket on them by drilling through the wall. To distribute the load over a large area, an additional bar or plate with perforations is placed on the reverse side, corresponding to the location of the bolts that secure the bracket.

You can hide such a mount by drowning it in a layer of plaster and leveling the surface.

Mounting the TV on the wall, step by step instructions

Having chosen the appropriate type of bracket and the method of its installation, you can get to work:

1. Mark on the wall places for drilling recesses for dowels or bolts (at the desired height and in accordance with the location of standard fasteners on the bracket base).
2. Drill holes according to the requirements for installation on an existing partition wall.
3. Insert the dowel bushes, and then attach the base of the holder to the holes and screw it on.
4. If hardening of the chemical composition is not required, work is continued immediately, installing the mating part of the fastener on the inside of the TV panel.
5. Connect the monitor and bracket by hanging the bar attached to the TV on the hooks of the holder.

If the instruction requires additional fastening (self-tapping screws, a bolt with a nut), perform this part of the installation.

How to make a bracket with your own hands?

Those who prefer to hang the TV on the wall without a bracket can use the materials at hand to make their own TV bracket.

Fixed rail bracket

It is convenient to make a fixed wall mount for a TV on a wall with a steel mounting plate. It provides a system of protrusions and grooves that hold suspended objects (furniture cabinets, etc.). You can assemble the bracket like this:

1. Determine the size of the rails (according to the distances for mounting on the back of the TV).
2. Cut material.
3. Fasten 2 pieces to the wall using standard holes and dowels.
4. Fix strikers on the back of the monitor (if the holes do not match, drill new ones in the striker).
5. Inserting the protrusions into the grooves, hang the monitor.

Budget bracket from a wooden plank

A wooden block can also be used as a homemade TV panel holder:

1. Cut the material (2 lamellas along the length of the monitor), identify and drill holes for fasteners, screw 2 self-tapping screws with a ring into the upper edge of the bars.
2. Install the bars on the screws on the underside of the receiver (use only standard mounting holes).
3. Mark on the wall the location of the ring heads on the bars.
4. Attach 4 hanging hooks at the marked points.
5. Hang the rings on the hooks.

Movable metal bracket

A complex type design, using several moving parts, can also be made independently. For it, you need to develop a drawing, taking into account the desired direction of rotation.

Tubes and studs are suitable as materials, as well as sheet steel for wall and monitor mounting plates. It is easy to make a design with a left-right turn by fixing 1 perpendicular element from a professional pipe on each plate. A through hole is drilled at the edge of each. When assembling the structure, pass a sufficiently long stud through everything and secure it with nuts and washers.

Brackets are simple devices used to mount TVs, as well as other household appliances. They are very popular, as they can significantly save space in the room. Basically, stands are used in the kitchen, to accommodate small TVs. When watching a movie, the bracket will be invisible due to the equipment installed on it.

There are many types of fasteners. Tilt and swivel arms are convenient for plasma technology and allow you to adjust the position for more comfortable viewing.

Fixed mounts have the tightest contact with the wall, so they are ideal if you are planning to mount a very large TV.

Both of the above options are mounted on the wall, respectively, and received the name - wall brackets. In addition to them, there are also ceiling fasteners. This design has the ability to change position by tilting and turning. This design is also very convenient for placing a TV, but it can only be used in rooms with a high ceiling.

Any type of bracket can be purchased at both a household and a hardware store. For the price they are affordable. But still, it is possible to invent a TV bracket with your own hands. This process is very laborious and takes a lot of time. Also, if you have a non-standard TV, then you can order fasteners for it from a specially trained person (master), according to the size.

So how do you make a DIY TV bracket? Before starting work, prepare a fastener drawing. It can be made to order, drawn by yourself or produced in a computer program. The main thing is to imagine what it is and what elements it consists of. In terms of the quantity and cost of materials, home-made fasteners will halve the cost of a purchased bracket. But if it is assembled incorrectly, it can cause costs due to damaged household appliances. Therefore, during its production, one should be extremely careful, and after work, check it for reliability, using unbreakable elements.

Brackets for LCD TVs

Several bars are used for the main material, their length is selected according to the width of the TV. Using a perforator, holes are formed on the material. The distance between them must be the same. The first bar is attached to the TV, and serves to attach it to the source material. It is attached with bolts. The procedure should be done very carefully so as not to damage the surface of household appliances. The second material is designed to be fixed on the wall. It is also attached with bolts and must make good contact with the wall. The TV is connected to the wall with the help of a third bar, which also adjusts the angle of inclination. All three materials should be tightly connected to each other, and form a lock.

When fastening, it should be borne in mind that the distance of the fastener from the floor must be more than one meter. The distance from the sofa to the TV should be approximately three times its diagonal. In order for the image brightness not to suffer, the angle between the fastener and the screen should be either sharp or straight, that is, not exceeding 90 degrees.

Plasma TV Mounting Brackets

The bracket should only be installed on a clean wall that does not have extra bumps and holes. Do not install it near windows and doors. Also, do not install in places where sunlight enters, which will contribute to a decrease in image quality and can damage household appliances.

The material should be chosen the most durable. Any household appliances may heat up when viewed, therefore there is a possibility of fire or ignition. In addition to the TV, with the help of fasteners, you can install other household appliances, such as a microwave oven, toaster, speakers and much more. For kitchen TVs, fasteners are made for convenience, right in the kitchen corner. It is important to observe the correct angle during installation.

The do-it-yourself TV bracket should be securely located in the wall surface. For greater reliability, household appliances are fixed with belts or a thick thread.

To your attention is a video on how to make a TV bracket with your own hands: