Water heated towel rail 400x600 side connection. Water heated towel rails with lateral connection. Side heated towel rail for bathroom

A water heated towel rail with side connection solves several problems at the same time: heating the room, drying towels and linen, removing moisture. The right or left side supply and output of the coolant is carried out in models of heated towel rails made in the form of a coil, and.

Benefits of using side connection heated towel rails

Lateral connection is considered the most effective scheme, if we compare the indicators of uniform heating and heat transfer of the dryer. By connecting the hot water inlet to the upper branch pipe, and the outlet from the lower branch pipe, it is ensured natural circulation coolant that evenly heats the entire area of \u200b\u200bthe device. Installation of the heated towel rail is carried out in the main riser, while there is no need to connect additional pipelines, the walls are not damaged.

The narrow heated towel rail with side connection fits perfectly into small-sized bathrooms, where every centimeter of space is valued. If you choose and install a narrow dryer correctly, then its heat transfer will be enough to perform the main function - drying textiles. When buying this bathroom accessory, you need to pay attention to the following parameters:
pipe diameter - not less than 22 cm;
device material - nickel-plated brass, stainless or chrome-plated steel;
operating pressure more than 6 atmospheres with an autonomous system, more than 15 atmospheres - for a centralized heating system or hot water supply;
pipe wall thickness - more than 1.5 mm.

In assortment construction stores there are many models of bathroom dryers. The standard side-connected heated towel rail is suitable for any heating medium supply systems and harmoniously fits into the interiors of both spacious bathrooms and small rooms. Affordable price and good energy efficiency will be the key to an economical configuration of the bathroom and ensuring a healthy microclimate in the room with constant changes in humidity.

A heated towel rail is installed in each apartment. it convenient fixture for drying things and bath accessories. The most important thing is the choice of material for it and the method of installation. The most reliable is the model with a side connection type.

This type has many advantages:

Wall surfaces are not damaged during installation;
The device can be mounted after all finishing work;
Mounted in the main risers.

Materials from which heated towel rails are made

Products are produced from three types of materials. These are stainless steel, polymers and chrome-plated brass. Stainless steel remains the most popular and most reliable product. It comes with an extra chrome finish. The walls of the pipe must have a thickness of at least one and a half millimeters.

Modern specimens have a different shape, which can be chosen depending on the size of the bathroom, design and functional needs. The most common type remains the coil, which was previously installed during the construction of apartments. Now you can replace it with a ladder, a lyre, a product in the form of the letters P and M.

Connection

Previously, a heated towel rail with side connection was only installed with a heating system. In this case, it is easiest to replace it in the summer, when the heating is turned off. Now it is also possible to mount it with a DHW system. In this case, it is necessary to negotiate with the service organization to turn off DHW riser during the installation. In order for the device to be in operation all year round, connection to the DHW will give this opportunity, but when connected to the CSO, it will only function during its operation.

The equipment of a modern bathroom includes not only well-known plumbing fixtures (bath, sink, shower), a useful and functional device - a heated towel rail. It is designed to dry towels, bathrobes and linens. In addition, the dryer provides room heating.

Given the specifics of using a heated towel rail - in conditions of constant high humidity - you need to choose it wisely. The following characteristics should be kept in mind:

Pipe cross section - a small diameter reduces heat transfer. The optimal size is 22 mm.
The presence of a nickel layer on the surface increases the anti-corrosion resistance of the device. Such a heated towel rail with side connection will not leave rusty stains on the fabric.
Configuration - has an impact on efficiency. The ladder-radiator performed well. If desired, you can choose more original models in terms of design.

Varieties of installation of the dryer

Stainless steel, polymers, brass (chrome-plated) and galvanized steel are used as raw materials for the manufacture of heated towel rails. The first material from this list guarantees the longest service life. As for the shape of the products, it has a large number of variations that include sophisticated design "installations" for ultra-modern interiors.

The “working” supply of equipment will depend on the method of installation. Distinguish the following types settings:

Installing a water heated towel rail with a side connection is a convenient installation process and reliable fastening.
Mounting via bottom connection- used if the product is overall or has a complicated configuration.
Diagonal connection - provides unhindered water circulation. It is not always possible to apply the method due to the peculiarities of the location of the water riser.

Important connection details

The coil can be connected to a heating system or to a riser through which hot water is supplied. In the first case, installation activities must be carried out after heating season so as not to resort to a forced shutdown central heating. In the second - the equipment will function only if there is hot water in the tap.

When buying a heated towel rail, you need to pay attention to the presence of accompanying documents, in particular, the instructions, which outline the lateral connection of a water heated towel rail. It will help you complete the installation yourself, without the help of master plumbers.

The lateral connection is also relevant if a tie-in is made to the hot water supply, and if a tie-in is made to the heating system. The first necessary installation operation is the installation of overlap valves for a heated towel rail with side connection. In the event of an emergency, this will make it possible to turn off the water in your apartment only to the radiator.

Another mandatory action preceding the installation is the coordination of such events with the employees of the housing office (indicating the time of the work).

Benefits of side connection

The advantage it has lateral connection- it can be installed directly on the riser. The factor that makes the water heated towel rail with side connection the best equipment among others is its attractive appearance and hidden wiring communications, which does not spoil the interior of the bathroom.

Adjusting the location of the device does not cause any problems; for this, a special bracket attached to the wall is used. It is this detail that holds the dryer on the wall surface.
When installing a heated towel rail, it is necessary to securely isolate each connection (you can use linen winding), because if a leak is found in a place hidden in the wall, then eliminate it without damage appearance the bathroom will be almost impossible.

Installation sequence

Replacing the coil begins with the dismantling of the worn-out device. Then water shut-off valves are installed, new equipment is connected to the thread (using angle or straight fittings). It is necessary to check the tightness of the connected device. This is the final stage. On average, the entire operation takes several hours.

With the help of water heated towel rails with side connection, you can not only heat the bathroom, but also prevent the occurrence of such an unpleasant phenomenon as mold. The equipment will dry towels and make acceptance hygiene procedures even more comfortable and enjoyable!

Water heated towel rails with side connection and vertical connection are leaders in the market of heated towel rails. Today, almost all bathrooms in high-rise buildings equipped with heated towel rails. These useful devices, in addition to their main function - drying towels and a variety of small linen, heat these rooms, create a favorable microclimate there, which prevents the formation of dampness, fungus and unpleasant odors. The most popular of them is a water heated towel rail with a side connection. The existing modern market offers a huge range of these devices, and experienced professionals offer their installation services. To figure out how to choose the right bathroom accessory, understand the installation and connection process, you need to study a certain amount of information and choose the best option for yourself.

1 Benefits of side connection
2 What to look for when choosing a heated towel rail
3 The procedure and nuances of replacing a heated towel rail
- 3.1 Materials and tools
- 3.2 Dismantling
- 3.3 Installation and arrangement of the bypass
- 3.4 Features of installation, fastening, connection
4 Conclusion

Benefits of side connection

The connection of the heat carrier to the heated towel rail in our houses can be made from a hot water supply riser or a heating system. At the same time, the most reliable way of its supply and installation is the lateral connection.

You need to correctly name such an installation vertical connection, since the location of the heated towel rail in relation to the riser can be on the left or right sides of the model. Its advantage is that it:

Not associated with damage to the surface of the walls;
Can be performed after completion of finishing work;
It does not require additional laying of pipelines and is mounted in the main risers.

What to look for when choosing a heated towel rail

To choose the right equipment for drying towels in the bathroom, you should always remember that it will be in conditions high humidity and coolant pressure. Therefore, when choosing, you need to focus on:

The indicator of working pressure, which must be at least 6 atmospheres;
diameter outer pipe, optimal size which 22 mm is desirable, since a smaller diameter will reduce heat transfer;
The interval between the axes of the dryer;
The presence of a nickel-plated surface to increase the anti-corrosion resistance of the product;
The distance between the openings of the inlet and outlet of the coolant;
The configuration of the device that affects the effectiveness of its functionality;
The material of its manufacture.

Towel warmers that represent on modern market manufacturers are made from various materials as:

Stainless or galvanized steel;
Chrome plated brass;
polymer materials.

The best are, of course, stainless steel products. Almost all of them are covered with a chrome layer and polished to a mirror finish.

In order for the purchase to be in good working order and please with its durability, the walls of the heated towel rail pipe must have a thickness of at least 1.5 mm. Towel drying products can choose various shapes, it can be:

Ladders;
coils;
non-standard;
Lyre-shaped;
P or M shaped designs.

The total length of the dryer pipe and the number of steps has a direct relationship with the size of the bathroom. If the area of the room is up to 8 square meters, then it will be sufficient for him to install a device with 3-4 steps or a zigzag. With an increase in the area, this heater must also be increased.

The procedure and nuances of replacing a heated towel rail

In the case of replacing an old heated towel rail with a new device, it is necessary to turn off the heat carrier supply. If before the repair in the bathroom there was no spare channel for emergency shutdown from DHW systems or heating, it will be necessary to resolve the issue with the housing office for a temporary shutdown of the entire riser. If the dryer is connected to heating pipes, these works can be painlessly carried out in the summer when the heating system is not working.
The whole process of the procedure for installing a new dryer is carried out in three main stages.

The old heated towel rail is removed, and pipes are prepared for the installation of new equipment.
A bypass is arranged and connected to the main pipe of the coolant supply system with a ball or valve valve.
Basic installation of new equipment is in progress DHW pipes or heating and check its performance.

Materials and tools

To perform work on the dismantling of old equipment with your own hands and the installation of a new one, you need to stock up on certain tools and materials, namely:

Welding inverter for cutting old pipes or a grinder;
A die for threading a heating pipe;
bypass;
Required fittings;
Ball or control valves;
Tees for a bunch of branched pipelines;
Shut-off valves;
Tape fum for wrapping threads at the joints.

For connecting pipes can be used:

Copper;
steel;
Polypropylene.

Copper pipes are characterized by durability, ease of installation, absence of rust in them during operation. Steel - are subject to corrosion, have a significant weight, but are cheaper than their counterparts. Polypropylene - the most convenient. They are lightweight, durable, mounted with fittings, do not corrode.

When installing a new heated towel rail, you need to choose pipes from a material that will be compatible with the main coolant supply pipes.

Dismantling

Installation of a new heated towel rail begins with the dismantling of the old version. To do this, you first need:

Disable hot water in agreement with the Housing Office. This is done by closing the main valve on the riser.
After the water drains from the riser, you need to remove the old heated towel rail. If it is previously mounted on threaded connections, they are simply unscrewed. If it is welded to the pipe as a whole, use a grinder for trimming. Here it is necessary to take into account the fact that the rest of the pipe must be left long enough to cut a new thread for the fittings.
Then, holding the old dryer, it is removed from the brackets and taken out of the room.

Bypass installation and arrangement

The bypass is a jumper made of a piece of pipe between the riser and the heated towel rail, which is equipped with connecting elements. He is the zone rapid response in unforeseen situations. When installing a bypass, the ends of the heated towel rail are equipped with ball valves, which stop, if necessary, the flow of coolant. When the heated towel rail is turned off, the coolant continues to circulate through the bypass without disturbing the operation of the riser.

Thus, the bypass provides full functioning heating system or DHW in case repair work in the apartment. For emergency situations or removal of air from the general communication system, the jumper itself is equipped with another third valve.

Features of installation, fastening, connection

Beginning general installation it is necessary to carefully study the installation instructions for the heated towel rail from the manufacturer and remember that:

The coolant must move from top to bottom through the heated towel rail. Therefore, the input connection must pass through the upper socket of the installed equipment.
The distance from the edge of the wall to the main axis of the dryer pipe with a diameter of up to 23 mm should be -35 mm, with a diameter of 23 to 50 mm - an indent should be 50 -55 mm.

At the stage of installing and fixing the heated towel rail with your own hands, you need to have an assistant nearby to properly align the installed device.

Before installing the heated towel rail, you need to attach the brackets that are included in the kit to it, and then attach this structure to the wall at the main location.
After the approximate installation, the places of future holes are marked on the tile with a pencil, which are made using a drill and a special tile drill. Plastic dowels are inserted into the finished holes.
Then the heated towel rail is finally attached to the wall and fastened with screws through the brackets into the dowels with a screwdriver.
Having installed the dryer on the wall, it must then be connected using fittings through the bypass and valves to the riser.
All fasteners are tightened carefully. For sealing threaded connections use fum tape or linen winding.
After completion of work, the entire system is checked for leaks. The taps are opened very carefully to gradually fill the volume of the heated towel rail with water so that there is no water hammer.

Conclusion

AT recent times installation of a water heated towel rail with side connection is the most common. Since this bathroom accessory not only dries towels, but also creates comfortable conditions for the adoption of hygiene procedures, being an additional source of heat.

Today at trading network new models of these devices appear with rotary mechanisms, additional shelves, convenient hooks that expand them functionality make the bathroom interior more comfortable and attractive.

Convenient both during use and during installation, side-connected towel rails of the “Rt” series are gaining more and more devoted fans every year. And the main merit of this, in addition to the excellent quality of such structures, is a whole list of their undoubted advantages. Welded construction ensures the reliability of the product, even in the case of sudden temperature changes and strong water stress. Whereas enough big square heat transfer is achieved due to the presence of several crossbars at once. In turn, standard connectors (32, 50 and 60 cm) guarantee that the system will fit 100% under every Russian-style water supply system. A wide range of models and size variations will allow you to choose the most suitable product for the interior of any bathroom. In addition, such "ladders" are quite versatile and are actively used not only in apartments and private houses, but also in toilet and shower rooms. public institutions or even industrial premises. These are multi-circuit models that provide maximum heat transfer.

Universal side connection towel rails

Such a heated towel rail will perfectly cope not only with drying towels or linen, but also with maintaining optimal temperature in the room. Basically, it is recommended to install a heated towel rail with a side connection if the room does not have a lower water supply. Also, such models are in great demand when it is necessary to replace an old-type heated towel rail (for example, “P” or “M” shapes). In this case, such a stylish, functional and reliable heated towel rail as a model from the Rt collection will come in handy. However, one should take into account the fact that the perfect way the supply for the "ladders", nevertheless, is the lower one. And if your bathroom provides a bottom connection, we recommend that you pay attention to models with a bottom or universal connection, which are also presented in a large assortment in our catalog.

Dimensions of the side connection of the heated towel rail - 32, 50 and 60 cm along the axes

It is possible to manufacture a heated towel rail with outlets for connecting to the wall (back), the price is as in the table, the production time is 5 - 7 days.

Specifications
Type of		Water
Main pipe wall thickness		2.0 mm
Pipe diameter		Ø - 32 mm (1 ') x 2 mm; Ø - 18 mm x 1.5 mm
Material		Stainless steel AISI 304
Surface		Mirror
Polishing		Electro-plasma
Coating		Missing
Test pressure		40 atmospheres
Operating pressure		8 atm. (24.5 max)
Water temperature		110 Cº
Life time		10 years
Manufacturer		Russia, Moscow, OOO Zigzag
Guarantee		5 years

Kit contents
Towel dryer	Mayevsky cranes	Wall mount	The passport

Standard sizes and prices of RT side connection towel rails

Connection axes 32 cm		Connection axes 50 cm		Connection axes 60 cm
	price, rub.	Connection x Width x Height cm	price, rub.	Connection x Width x Height cm	price, rub.
RT 32 x 40 x 50	4560	RT 50 x 40 x 60	4810	RT 60 x 40 x 70	5420
RT 32 x 40 x 60	4810	RT 50 x 40 x 70	5420	RT 60 x 40 x 80	5910
RT 32 x 40 x 70	5420	RT 50 x 40 x 80	5910	RT 60 x 40 x 100	7270
RT 32 x 40 x 80	5910	RT 50 x 40 x 100	7270	RT 60 x 40 x 120	8370
RT 32 x 50 x 50	4920	RT 50 x 50 x 60	5170	RT 60 x 50 x 70	5790
RT 32 x 50 x 60	5170	RT 50 x 50 x 70	5790	RT 60 x 50 x 80	6400
RT 32 x 50 x 70	5790	RT 50 x 50 x 80	6400	RT 60 x 50 x 100	7630
RT 32 x 50 x 80	6400	RT 50 x 50 x 100	7630	RT 60 x 50 x 120	8860
RT 32 x 60 x 50	5420	RT 50 x 60 x 60	5540	RT 60 x 60 x 70	6280
RT 32 x 60 x 60	5540	RT 50 x 60 x 70	6280	RT 60 x 60 x 80	6890
RT 32 x 60 x 70	6280	RT 50 x 60 x 80	6890	RT 60 x 60 x 100	8010
RT 32 x 60 x 80	6890	RT 50 x 60 x 100	8010	RT 60 x 60 x 120	9360