Unique pots and flowerpots for the garden with their own hands. Tips for creating a planter from scratch and from old things How to hang a flower pot on a rope

Warm days are approaching, and many will want to take their flowers to the balcony or loggia. But sometimes there is not enough space for flowers and you have to look for ways to place them. I really like vertical gardening. And for a convenient vertical arrangement of flower pots, you can make pots for them with your own hands using improvised means.

• 1 Hanging planter made of fabric strips
  • 1.1 Cache-pot from a plastic bottle
  • 1.2 This is also interesting

Hanging planter from strips of fabric

Almost every woman collects several knitted T-shirts during the season, which there is no longer a desire to wear and throw away. You can make a lot of useful things out of them, as well as make cords for weaving pots.

To do this, cut strips, about 2 cm wide across the product. It is better not to use a hemmed edge. You should get a ring with two seams, one of which needs to be cut, and then the strip is stretched. You will need 4 to 6 strips depending on the length.

If the strips are long, then 4 pieces will suffice. They need to be tied into a knot in the middle. For short stripes, make the knot closer to the edge.

Then you can start weaving pots. For convenience, you can use an empty flower pot.

The photo shows in some detail the scheme for tying the strips. Repeat the process of tying the knots depending on the height of the pot so that it does not fall out of the pot in the future.

The remaining ends of the cords can simply be tied into a knot, or can be tied to a ring to make it more convenient to hang.

Cache-pot from a plastic bottle

This planter is more suitable for use in the country. From a plastic bottle, cut off the top of the desired size. It is better to melt the cut edges so that later you do not get hurt and damage the plants. Make 3-4 holes and stretch the rope through them.

Such a planter can be hung on an old tree or used on a balcony, having previously planted flowers or herbs in it.

In the same way, you can use plastic bottles with handles from household chemicals. Naturally, before use, they must be washed thoroughly.

Then cut off the bottom of the bottles, turn the lid down, attach it somewhere, fill it with soil and plant the plants. By the way, if you do not tightly tighten the lid, then excess moisture will not linger in the container and the roots of the plants will not rot.

Of course, you can pre-decorate the bottles, but this is if you wish.

Even the brightest flower beds need framing - "outfits" that will further emphasize their beauty. The most spectacular and at the same time simple “outfits” are considered to be street planters. Making them with your own hands will not be difficult. Do you want hanging planters from bottles, wicker from a vine or ground from a tree stump? No problems! Read the instructions on how to make a planter from these and other materials, as well as watch educational photos and videos - they will help you transform your garden beyond recognition.

We make pots from rags and cement

To make this pot, you will need:

• cement;
• old tablecloth;
• a vase, pot, or other vessel for form;
• water;
• bucket;
• "Mixer" - nozzle for a drill;
• dye.

The procedure for creating a pot is very simple. First you need to prepare a cement mixture. To accurately determine its volume, take a tablecloth, place it in a bucket and mark on the walls how much space it takes - follow this mark and pour water for the solution. Add cement to the water and mix them with a “mixer”. The result should be cement milk, reminiscent of the consistency of slightly watery sour cream.

Then, when the mixture is ready, place a tablecloth in it and leave it for a couple of minutes so that it is completely soaked. After that, remove the material and make sure that there are no dry spots left on it.

Next, take the prepared container for the form and hang a wet tablecloth on it. Gently spread the material and leave to dry. When the cement mortar has completely hardened, remove the product from the container-mould and paint. Use special paints for concrete - they are stronger and more durable. Once the paint has dried, you can use the planter for its intended purpose.

We make pots from plastic bottles with our own hands

Plastic containers are a universal material for flower pots, since several models of “outfits” can be built from it at once.

The first option is a classic planter. Take a plastic bottle, two CDs, sandpaper, scissors, glue and paint. Cut the bottle with a wavy line into two equal parts. Sand both discs with sandpaper. Take the bottom of the bottle and glue it to the stripped first disc. Then take the top part: first unscrew the cap and glue it on the second disc, and once the glue has dried, screw the plastic part of the bottle back onto the cap. When finished, cover the blanks with paint.

The second option is a hanging planter. Here you will need: bottle, rope, paints, scissors. First, cut off the neck of the bottle - only the straight bottom of the container will be used in the work. Then cut small holes on the sides for the rope. Then decorate the design: paint, cut out patterns, draw an animal, cut off the top edge - everything you can do neatly. And then thread a rope into the holes, put a flower pot in a flower pot and hang the structure on strong nails.

We make wooden flower pots

The easiest way is to make a flower pot from a stump or a log. Take:

• wood;
• drill: drill length - at least 25 cm, diameter - at least 20 cm;
• chisel;
• protective impregnation for wood.

1. Pick up a log or stump of the required diameter. Measure a part to the height of the flower pot or flowerpot and cut it off - this is again a planter.
2. Drill a series of holes in the top plane of the wood to destroy the core.
3. Remove the wood with a chisel - you should end up with an empty container. The edges need to be aligned.
4. Treat the inner walls of the planter with a protective compound and place a pot of flowers in it.

Advice. The wooden planter itself can also act as a pot, but for this you need to put durable polyethylene in the container and fill it with drainage from above. And only after that you can put the soil mixture with a flower.

A more complex option is a cache-pot made of boards and timber. You will need:

• bars with a section of 25x25 mm;
• boards 15 m thick;
• self-tapping screws;
• wood glue;
• drill;
• protective impregnation for wood.

The algorithm for making pots is as follows:

1. From the bars, assemble a frame in the shape of a cube.
2. Cut out the details for the bottom and walls from the boards. Sand the panels on all sides.
3. Drill a few holes in the bottom for drainage.
4. Assemble the planter structure together: attach the side and bottom panels to the cubic frame using self-tapping screws. In order to give the product even greater reliability, carefully glue all the joints.
5. Cover the surface of the finished structure with a protective compound.

Weave pots from the vine

Another simple but interesting version of the flower "outfit" is a vine planter. Prepare for work:

• flexible vine - it can be both fresh and dried;
• plywood sheet;
• moisture protective impregnation;
• drill;
• awl;

First, soak the vine in water to give it the extra flexibility needed for easy weaving. Cut out an oval or round bottom blank from a plywood sheet. Drill the same holes along the edge of the resulting bottom with a diameter slightly smaller than the diameter of the vine. All holes must be at the same distance from the edge of the bottom. Then insert a strong twig into each hole - this will be a blank for the planter frame.

The next step is direct weaving: lay the vine between the rods, gently pressing each new row with an awl. Wrap around the twigs until the product reaches the height you need. Laying methods can and even need to be changed through the row - this way you will achieve a different textured surface of the pots.

At the end of the weave, either cut the rods or weave them into the main rows of the vine. Then let the structure dry a little and get stronger. The last stage is the treatment of the cache-pot with moisture-proof impregnation and varnishing.

We carry out a cache-pot from plaster

To make such a planter, prepare:

• gypsum;
• wire;
• textile strips no more than 10 cm wide;
• paint;
• bucket;
• protective varnish.

The first step is to prepare the frame. Turn the bucket upside down and braid its surface with wire. Turn the edges over and hide. Carefully remove the finished frame from the bucket.

The second step is the dilution of the gypsum mortar. Take gypsum and mix it with water until the composition begins to resemble sour cream.

The third step is the construction of the "body" of the pots. Dip all textile strips into the gypsum solution and soak for 3 minutes. Then, one at a time, take out the tapes and put them on the frame layer by layer. The wall thickness should be at least 2 cm. Then carefully treat the walls of the structure with the remaining gypsum mortar. After this, the planter should dry completely - set it aside for 10-12 hours.

The fourth step is the design of the structure. Cache-pot can not only be painted, but also decorated with a variety of glass, beads, pebbles - any small details that you like.

Advice. After drying, the walls of the pots will not be completely even, so the paint will fall poorly. To avoid this, carefully clean the surface with sandpaper and treat the structure with a white water-based composition, and then apply the paint of the desired color on the planter with the second layer.

Now you know that you can make a beautiful flower pot from almost any material without spending a lot of time or a lot of money. The main thing is to turn on your imagination and be smart. So if you want to effectively decorate your garden, do not rush for store pots - take the initiative in your own hands and do not be afraid to experiment.

How to make a planter: video

Planters for the garden: photo

Good housewives strive to make their home comfortable and beautiful. Flowers in interesting flower pots on the windows are one of the ways to make your home cozy. Skilled hands can build pots from almost nothing. Waste container, which is just right to throw in the trash, easily turns into a design masterpiece that makes a good impression on the hosts and guests.

How to create a masterpiece from nothing?

In every house there are old things that are a pity to throw away. They can be given a second life by making. It is enough to wash the container, remove the stickers from it, make a hole in the bottom - and the new house for indoor plants is ready.

It is now fashionable to plant flowers in worn shoes. Especially comfortable rubber. You can’t put such flower pots made with your own hands from improvised materials in an apartment, but they will fit perfectly for the street.

DIY plastic bottle pot

Usually they make pots for seedlings, but they are also suitable for creating real flower pots.

The easiest option:

1. Cut off the top of the bottle.
2. Poke a hole in the cork with a thick needle to allow excess water to drain.
3. Insert the top with the twisted cork into the bottom of the bottle with the neck down.

A simple pot is ready.

You can also make a flower pot in the form of a large glass with your own hands. The disadvantage of such a product is the absence of a hole for water drainage. So that the plants do not die, a good layer of drainage should be covered at the bottom and such representatives of the flora that are not afraid of overflow should be placed in a homemade planter. It can be a compact houseplant - anything except a cactus.

The best drainage in such cases is activated charcoal. It effectively absorbs excess water and prevents roots from rotting. Activated charcoal can be purchased in large packs from a hobby store.

You will need:

• bottle;
• computer disk;
• glue gun;
• dye.

Manufacturing:

1. Cut the bottle in half.
2. If desired, make the edges curly in the form of teeth or waves.
3. Apply glue to the bottle cap and stick to the center of the disc.
4. Paint with spray paint.

You can also paint the second part of the bottle, then you get another flower pot.

Now there are paints that imitate stone, wood, metal. They can decorate an ordinary plastic flower pot.

Tin cans in progress

Flower pots from cans are out of place in a classic interior, but they will fit to decorate a loft-style home or a country house. Cans of baby food, paint, canned food are durable and lightweight. If you remove the label from them, even without painting they will look decent.

If the vessel is damaged, covered with glue, scratches, rust, you will have to renew it. The easiest way is to paint. Pattern and color can be any. The main thing is that the owners like the finished product.

old crockery

Pots, plates, teapots and any utensils can act as flower pots - they can also be made with your own hands very simply. It is enough to update the surface with acrylic paint and make holes in the bottom. Making a new home for the flowers is a great way to benefit from a beaten mug or bowl.

Teapots can be effectively hung by the handle, creating hanging pots with ampelous plants.

Planters and pots that you can make with your own hands from old dishes, photo:

There are special drills for ceramic tiles, but they are thick and not suitable for processing mugs.

Holes in a ceramic or porcelain cup are made with an electric or hand drill by inserting a glass drill into it:

1. A piece of paper is glued to the bottom of the cup.
2. Periodically, the drilling site is poured with water so that the tool does not overheat.

A large mug with a massive bottom is drilled with a drill with a tile drill in small modes, without pressing the tool. During operation, the container must be upside down.

Grow only in transparent containers. Old glass vases cope with this role. You will need a special glass drill. To prevent glass dust from spreading around the room, the vase must be placed upside down in a bucket filled with water, so that it is completely hidden in the liquid. Water will protect against dust, dirt and overheating, and reduce the likelihood of cracking the vase.

The drill is turned on at the smallest speed and allows the tool to enter the glass on its own, without exerting physical effort. The slower the tip moves through the thickness of the glass, the less likely it is that the container will crack.

The easiest way is to drill dishes made of metal. Pots are made from steel and aluminum teapots, cans, pots, cups, mugs. Metal can be drilled even without a drill and a drill, using a metal screw and a conventional screwdriver.

Cement and rags - who would have thought?

It is not known who first came up with the idea of ​​​​making a street flower vase from old rags and concrete, but honor and praise to an unknown inventor. His technique makes it possible to produce exquisite garden decorations from waste material.

To make outdoor flower pots with your own hands you will need:

• rag made of fabric that absorbs water,
• any container (for example, an old bucket),
• coloring pigment for concrete admixture,
• mixing container,
• strong polyethylene.

To stir the solution, you need a paint spatula. An electric drill with an appropriate nozzle will greatly simplify the work.

Making a vase:

• sift the sand from debris and large stones;
• put a rag in the container and make a mark at the level to which it reached;
• pour water into the container up to the mark;
• pour sand and cement 1: 1;
• stir;
• wrap a bucket or other container that you have chosen to make a vase with polyethylene;
• dip the rag into the cement mortar so that it is completely saturated
• after 10 minutes, remove the rag and let the excess solution drain;
• put the rag on the form, wrapped with a film, and turned upside down;
• straighten the fabric so that the bottom is even, and bend the edges with arbitrary folds or sharp creases;
• leave the product for 1-3 days;
• remove the cloth from the container.

Do-it-yourself planters made of cement and fabric, video:

The technology of making a flowerpot from improvised materials will be quickly understood by those who made flower pots from vinyl records, melting their edges over the fire, after which they sagged in beautiful folds. Now that the records have become a rarity, inventive people have figured out how to make similar products from ordinary fabric.

Ideas for floor vases

Floor vases are used to decorate apartments and country houses. In order not to purchase a vessel in a store, you can use the well-known papier-mâché - a mixture of wet paper with PVA. The substance is smeared on a base of any durable moisture-proof material.

Papier-mache allows you to create complex shapes and specific relief. If a smooth surface is needed, the dried product is sanded with an abrasive cloth and a leveling layer is applied.

The retro style vase is made from an old aluminum can, spray-painted brown. In the same way, you can decorate a bucket for flowers.

In a metal vessel, you can put both artificial and natural flowers. If you cut off the neck and drill a few small holes in the bottom, the can can be covered with earth and used to grow live ornamental plants. Aluminum is cut with a circular saw, metal shears, a hacksaw for metal, an electric jigsaw.

DIY garden vases

Garden vases are easiest to cast from concrete. The surface of the product is decorated with any natural materials, in this case pebbles.

Such vessels are durable, take any shape in the hands of the master, have a solid weight, so they are not blown away by the wind and do not overturn.

Manufacturing technology:

• choose two containers of different sizes, one of which fits freely into the other with a large gap;
• treat both containers with sunflower oil so that the solution does not stick to their surfaces;
• mix sand with cement 1:1;
• dilute with water to the consistency of thick sour cream;
• pour the solution to the bottom of a large container;
• fix a piece of plastic pipe to form a hole for drainage;
• wait until the solution sets;
• put a small container in a large one;
• fill the gap with concrete;
• leave for 24 hours;
• remove the inner container;
• spray concrete with water;

After a week, the finished flowerpot can be shaken out of the mold, covered with earth and planted in it.

pot decoration

When it comes to planters, color is often more important than shape and even size. A beautiful drawing makes you pay attention to the design of flower pots.

Many grow indoor flowers in ordinary red clay, believing that such containers "breathe", so the plants are more comfortable in them. There is some truth in this. But even such a pot can be given a bright personality, and without compromising useful properties.

Making a dull flower pot with multi-colored pebbles, as in the photo, will not be difficult to do with your own hands:

It is not necessary to cover the clay with an airtight layer of varnish or paint. You can take a glue gun and paste over the walls with beautiful pebbles or small cuts.

An interesting option for decorating flowerpots is eggshell. It is very important to free it from the film before work, rinse and dry well. The shells are glued with the convex side outward to the PVA glue.

The final step is coloring. You can paint both the shell itself and the walls of the pot.

Perhaps the most sophisticated way of decorating is decoupage. This technique involves the use of paper and can be used on any pot, including plastic and corrugated.

Decoupage pot decor:

1. Clean the surface of the pot from dirt and degrease with acetone.
2. Cover with base paint.
3. Cut out the necessary motives from paper.
4. Glue the paper to the surface.
5. Varnish.

Master class on decoupage of a flower pot on video:

You can decorate a flower pot with your own hands using lace. It gives sophistication to any product, even a cheap plastic pot. It is easy to work with this material. The container is covered with PVA glue and the fabric is glued.

Instead of lace, you can take burlap or combine these two materials, as well as additionally decorate the fabric with beads or beads. All additional elements are also glued to PVA glue.

Indoor flowers in flowerpots are a wonderful way to decorate an apartment or house, make the room more lively and cozy.

In this article, we offer you interesting ideas on how to make beautiful hanging flower pots using a variety of materials, such as wood, leather, twine and other improvised means.

Also 5 step-by-step master classes with diagrams and photos on how to weave flower pots quickly and easily with your own hands and create a really beautiful interior decor.

Leather hanging planters are easy to manufacture, but look very original. Add some style to your home decor with this wonderful leather planter. It can definitely become exactly the highlight that makes the interior unique.

Master class: leather hanging planter

Necessary materials:

• Distilled (purified) water
• Tracing paper (21x28 cm) and 4 pieces of strong rope (or leather laces), each approximately 90-120 cm long
• Leather dye (optional) and gloves
• Leather (30x30 cm square)
• Packing tape, a simple pencil and a stationery knife
• Computer and printer (for template printing) and template
• Sponge for wetting and coloring

Step by step diagram:

Step 1: Preparation and placement

Print out the hanger plant template on tracing paper. Lay the template down on the wrong side of the leather and choose the ideal placement (not too close to the sides to avoid any imperfections in the leather).

Step 3: Soften the skin

Dip the sponge into the purified water, and then evenly apply moisture to the skin. Repeat this step at least three times until the skin looks like it can't take in more water. This will soften the skin, and facilitate our work on weaving pots.

Step 4: Template transfer

Now place the template in the place you selected earlier and tape it on the sides so as not to move to the side. With a simple pencil, direct the lines printed on the tracing paper by pressing the pencil with medium force. Be careful and don't miss any line.

Step 5. Cutting

Now peel off the template from the skin to see how the design has transferred to the surface of the skin. Using a utility knife, make cuts in place of the lines.

For convenience, you can first cut a circle along the outer contour. The cuts should be clearly drawn along the drawn lines.

Step 6. Coloring

Note: This step is optional, depending on the desired color and materials at hand. In our case, we dyed the skin dark brown.

After the skin is dry from moisturizing (at least one hour), apply the desired dye. Apply the paint with a sponge (wearing gloves) until the desired effect is achieved.

As the skin dries, pull it back a little to give it a voluminous shape. You will start to see the skin deform, keep going pulling and stretching it to create the shape of the pot as it should be when finished.

Step 8: Hang Up

• After, how the skin is completely dry, and a planter shape is formed, punch four holes in the upper part to thread the ropes through them.
• You must place them evenly, at the same distance from each other, so that the suspended flower pot does not then lean to one side.
• Take four ropes (regular or leather) and on each of them tie a knot, tightening it tightly at the end.

Step 9: Decorate and Mount

Add tassels, beads, rivets- everything that is necessary to achieve the desired style in the end. At the top of the hanging cords, gather all four of them together and tie into a knot.

You can use this knot to hook onto a ceiling hook and/or ring. See if the length of the pendant suits you, if necessary, tie the knot at a different level.

Straw hanging planter

This planter will suit the interior with innovative notes. Transform and complete your home decor with their neon cocktail straws and strings. And for this, even 15 minutes will be enough for you!

Necessary materials:

• neon threads
• neon straws (8 pieces per pot)
• flower pots for indoor plants (we used white ones made of melamine)
• house plants (succulents)
• scissors

How to weave - instructions:

Step 1: Cut the threads

Cut eight pieces of neon cord, each 90-150 cm long, depending on how close to the ceiling you want to place the pots.

Step 2: Making a Knot

Take the newly cut threads together and tie a knot at one end, resulting in a tassel from a small excess of cord at one end.

Step 3: Divide the threads into sections

Lay out the rope in four sections (similar to the shape of a cross). That is, two ropes in each section.

Step 4: Cut the Straws

1. Cut off in straws that small part that is separated by a spring. Then cut it in half. Take eight of these small pieces and stretch a thread into each of them.
2. Move the straws to the center(knot) and on every two threads (in sections) make a knot. Here's what it will look like:
3. Lay out the threads again in the shape of a cross, two threads per section. Only now, to form a section, take one thread from the previously adjacent sections.
4. Cut the straws into pieces (total need 16), each of which should be the size of a piece of straw, which is separated by a spring.
5. In each of 8 pieces of straws thread and make knots on the threads from one section.
6. Similarly, lay out 2 strands in the shape of a cross, one each from adjacent sections.

Add a third and final set of straws to the strands and tie adjacent strands (similar to the previous set).

Step 5: Hang Up

It remains only to hang the pots and insert a flowerpot with indoor flowers into it. Make a few pieces, then together they will create a beautiful composition.

And neon straws will also glow a little at night, which will look very original.

Macrame flower pot

The macrame technique has, probably, the most variations in the manufacture of planters. They can be very simple, which can be done in just 10-15 minutes with your own hands, or complex with many hours of work. Practice weaving first on the lungs, hone your skills, and then improve.

Master class: DIY macrame weaving

Macrame is back in fashion, as is needlework in general. In this master class, you will learn how to make a hanging planter with your own hands using this technique. There is nothing complicated, just follow the instructions and you will succeed!

Necessary materials:

• 3 cords 2.5 m long and 0.5 cm thick
• Metal ring with a diameter of 2.5-3 cm
• Hook (on wall, slot) to hold macrame while working
• Scissors and colored rope
• Glass pot in the form of a ball with a diameter of 20 cm
• Drainage stones and soil
• House plants that climb (e.g. Stephanotis)
• Decorative moss (optional)

Step-by-step instruction:

Step 1: Thread the ropes into the ring

Pull all three ropes through the metal ring until the ring is in the middle of the ropes. Thus, you now have six ropes to work with, each 1.25 m long.

Step 2: Making a Knot

1. Of all tie a knot with six ropes right next to the ring. Make it as tight as possible, for this, after forming the knot, tighten each rope separately.
2. Hang the ring on a hook (if there is no hook, then tie it to a cabinet handle or anything like that with a separate small rope, the main thing is to fix it). This will allow you to use both hands while working.

Step 3: Divide the Cords into Groups

• Separate the cords into three groups, two in each. Tie a knot in each pair 45 cm below the ring. You will have three knots at the same level, make sure they are tight.
• Take one rope from two adjacent pairs and tie them together about 12 cm below the previous knot.

Repeat the previous step with the rest of the ropes so that they are all tied together. This will create a zigzag pattern between the cords.

Step 4: End Node

1. Approximately 12 -15 cm below the second set of knots, gather all six ropes together to make one big final knot. Pull each cord individually to make the knot as tight as possible.
2. See what the length you need to leave and cut the ropes to the right size.
3. Wrap the multi-colored threads around the rope in several places, creating blocks a few centimeters long. This stage is decorative and is optional. Now the macrame pendant is ready and you can place the pot in it.

Step 5: Planting Indoor Flowers

At the bottom of the glass pot, place stones for drainage to make a layer about 2.5 cm high. Fill the rest of the bowl with soil.

1. Remove the plant from the temporary pot and place in a glass jar. Pour water over and press down on the soil to compress it. You can place decorative moss on top of the soil, optional.
2. Place the glass bowl with the flower over the lowest node and spread the ropes to the sides to fix well.
3. Straighten the plant if it is tangled in the ropes. Hang and admire the beauty of the plant and your own product.

Macrame schemes for flowerpots

Here are a few more schemes for those who want to master the weaving of macrame. They are very simple - suitable even for beginners. Look at the photo and repeat. A clothesline or thin twine is perfect as a material. The minimum consumption for a hanging planter is 10 meters of rope.

Wooden planter

The tree also gives a fairly wide range of actions, various shapes, colors. Choose what you like best and create.

Master class: hanging wooden planter

This hanging planter will wonderfully complement your home interior. It is done quickly and simply, the materials also will not take a lot of money. The best solution for an apartment.

Necessary materials:

• Wooden plate and saw
• Home plants and flowerpots
• Rope and metal ring
• Drill and sandpaper
• Paint and brush

Step-by-step manufacturing scheme:

Step 1: Making Wooden Squares

Consider how many tiers your flower stand will have ( there are 4 of them, but you can do more or less ). Choose the houseplants you want to place there.

Based on all this, cut out the required number of squares from a wooden plate.

1. To do this, turn the pot upside down and place it on a plate, circle and leave on the sides about 5 cm, thus determining the size of the square.
2. With a saw make squares.

Step 2: Making holes for the pots

1. You already have a circle drawn on the tree from the top of the pot, now you need to draw another one in the middle of it so that their centers coincide, but the diameter of the new one was about 1-2 cm smaller.
2. This value depends on how quickly the pot that you will place in the stand increases to the top, and also you want so that the wooden square is almost at the very top, or in the center of the pot.
3. You can take another pot, suitable for the size of the stencil, and circle it.

• Cut out this new circle with a jigsaw. For convenience, you can first make a hole with a drill and, starting from it, work with a jigsaw.
• The pots should now fit inside the squares.

Step 3: Hanging Holes

At the corners of the squares you need to make holes for the rope so that they can be hung. To do this, use drill with a diameter of up to 1 cm.

Step 4: Paint the Tree

Using sandpaper, remove the roughness and irregularities that have formed after sawing and drilling. Now the tree can be painted or simply treated with an antiseptic. In this case, dark brown paint was used.

Step 5: Paint the Pots

Pots can also be painted, if desired. Sloppy strokes of white paint look good on plain clay pots. This step can be skipped.

Step 6: Putting it all together

In order to fasten the wooden squares together, we need a thick rope: cut 4 ropes of 180 cm each (for a given number of tiers). Pull one rope into each corner hole of one of the squares and tie a knot at the end, this will be the lower part of the structure.

Tie one more on each rope. knot at 25-30 cm above the previous one and thread the ropes into the holes of the next square. Check that everything is even, and the second tier is clearly horizontal above the first, correct the knots if necessary. The second tier is ready. Repeat these steps for the remaining tiers.

Step 7: Plant Your Plants

A practical advantage of such a hanging stand is that water that can flow down after watering from the top plant will drip onto the lower one. So a pot stand is needed only on the lowest tier (if you use it outdoors, you can do without stands at all).

You can also put coffee filters or similar absorbent materials on the bottom of the pots so that the water can flow out, but the earth will not fall out through the hole.

TIP: To prevent the bottom pot from falling off the stand if someone accidentally catches the rope, glue it to the pot with superglue.

Step 8: Transplant the plants into prepared pots.

If you glue the base of the lower pot before inserting it into the wooden square, it will turn out like in the photo below. If you want the bottom pot to be inserted into the tree in the same way as the rest, then first transplant the plants, insert the pots into the holes in the tree, and only then glue the stand to the bottom one.

Step 9: Hang Up

1. To hang this structure, pull the ropes through the metal ring and tie a knot, or bend them over and tie them around with another thin rope.
2. Adjust the rope so that all tiers are horizontal and even.

Such a stand is good, just do not forget that the flowers need a sufficient amount of light.

A hanging stand is a wonderful solution for those who love flowers but don't have enough space to place them.

Pots made of copper tubes

The manufacturing principle is similar to that described in the previous master class, only copper tubes are used here (and they fold into a slightly different pattern). Of course, these materials will be more expensive than straws, and cutting them is not so fast, but in general there is no difficulty, and it turns out beautifully and with high quality.

TIP: If desired, copper pipes can be replaced with plastic straws for cocktails

Necessary materials:

• 2 m copper tube with a diameter of approximately 3 mm
• Mini pipe cutter
• Strong thread or fishing line
• Leather cord (length depends on how high you intend to hang the pot)
• small pot
• Plant

Step by step weaving:

Step 1: Cut the tubes

You need to cut the tube into the following pieces: 20 pieces 4 cm long and 5 pieces 24 cm long. Cut long pieces first, and then small ones, it will be more convenient. Use a measuring tape for measurements.

Step 2: Start folding the tubes

Tie a knot at one end of the fishing line, and thread the other through 5 small pieces of the tube so that you get a pentagon (that is, the line must be passed through the first piece of the tube twice).

Step 3: Continue making pentagons with small tubes

• Pass the line through 4 tubes of the same size, and then through the tube of the previously formed pentagon. Now the line is in the tube connecting the pentagons, and you need to bring it through the top tubes of the pentagon you just made to its left edge.
• Don't worry if they don't look perfect, everything will straighten out when you hang and place the pot.
• Then do it in the same way 2 more pentagons, in total there should be 4 pieces, and they should be located as in the photo below.
• Now bring the line through the tubes to the bottom of the extreme pentagon and put a tube on it. Then pass the fishing line through one edge of the other extreme pentagon.

Here's what should happen:

Pass the line through 2 more tubes, and then through the edge of the pentagon, as in the photo below. It should look something like a flower, or rather like this:

Step 4: Stringing Long Tubes

1. Lead the fishing line to one of the highest points of the structure (between the two upper tubes of one of the pentagons). Now the fishing line needs to be threaded through a long tube.
2. Pass the line through another long tube, and then direct it to the next highest point of the pentagon structure (any, not necessarily adjacent).

1. Pass the wire through 2 small tubes to get to the next high point. Now pass through another long tube, the line will come out to the junction of the long tubes, return the line back down through one of the previous two long tubes. Attach the fourth tube in the same way.
2. Now it remains for you to attach the last tube, but first place a pot in the middle of the structure, otherwise it will not fit through the honey tubes later.
3. Now attach the last tube. Here's what should happen:

Step 5: Attaching the Leather Cord

Cut about 30 cm of leather cord and attach it to the connection point of the long tubes. You can tie a knot, but here, for aesthetics, hot glue was used, fastening it to a neatly folded end of the cord. Here's what it looks like:

To hide the glued area, cut another small piece of cord, secure it with hot glue, and wind it around the cord to hang from.

Trim off excess line and cord. And the last step: plant your favorite houseplants!

Where to hang pots

Moreover, in summer, plants can be placed both inside and outside the house, but since it is cold now, we will focus on home ones. You can green any room of the apartment, kitchen or hallway, the main thing is to take into account the needs of plants, the right amount of light. In fact, each version of the hanging planter can be placed in any room of the apartment, so this is only your design decision.

Of course, you can just put a flower pot on a windowsill or bedside table, and it will already look good. But if you try a little more, then you can decorate the appearance of the pots, and make better use of the space of the apartment, at the same time arranging the plants and not taking up extra space with them (with hanging planters).

Above the workplace

Here, a hanging planter will not take up much space, especially since we always try to put the desktop closer to the window, which will be very popular with indoor flowers.

In the bedroom

The bedroom is not only beautiful, but also very useful to place plants. They enrich the room with oxygen. And how nice it is to wake up among the greenery. Try hanging plant pots in your bedroom.

In the kitchen

This is ideal, you will never hook or turn over a flowerpot. The planter looks very homely in the kitchen!

On the balcony or in the chill-out area

If the area of ​​\u200b\u200bthe apartment allows, then with the help of flower hanging flower pots, you can plant a whole room and make a mini-garden. But spruce squares are not enough - you can arrange a comfortable seating area on the balcony.

Planter ideas from improvised materials

If you show imagination, then a hanging planter can be made absolutely from any materials at hand. Starting from old cans, bottles to unwanted towels and T-shirts.

From beads

If you have old beads lying around and you don’t know what to do with them, then here is one of the options for solving the problem - we decorate the pots.

From baskets and pots

Such pots can be used both for a single pot, and for several at once. Such wicker baskets are sure to be found in many homes. They often lie idle, but in vain they will make an excellent suspension for flowers.

High-tech planter

Modern suspensions made of concrete or brass will fit into the modern style of the apartment.

From bottles

Probably the cheapest of all methods, but it looks no worse than the others. We collect empty plastic and glass bottles and make original flower pots.

From moss and shells

Many houses have shells brought from the seas, and if you drill a small hole and plant small succulents there, a mini-planter will learn. The main thing is the quantity, 3-8 pieces will create an excellent hanging garden.

People are very fond of beauty and aesthetics. Coming to visit, the first thing that catches your eye besides repair is the plants that the owner of the apartment grows.

And if you have a private sector, then the basis of the aesthetics of the house are flowers and various decorative lamps, plaster gnomes, clay sculptures.

Buying the most ordinary pot is trite and not always very beautiful, and the phrase: “What wonderful flowers you have” often sounds like flattery, since the owner, who has the most ordinary pots, unfortunately, cannot show off originality.

Recently, do-it-yourself crafts are gaining more and more popularity, because a person first of all expresses his artistic abilities, and when they come to visit, instead of the usual compliments, such people hear: “Everything is so unusual, did you do it yourself?”.

There is more than enough pride after such words, but now let's get down to business and throw a couple of ideas for flowerpots under your favorite petunias (this flower is standard, beautiful and almost most people have it, so examples will be provided specifically for this variety).

materials

Do you have an extra wheel, block, or any other extra material? Do not rush to throw it away, you can make a wonderful decoration for flowers out of it.

But before that, you need to look at the pros and cons of the material:

1. Wood. There is no need to care for the material, but it is necessary to pre-process it.
2. Ceramics. Ideal for creating decorative structures: you can give a wide variety of shapes, but the objects are very heavy and fragile.
3. Plastic. Cheap, lightweight and requires virtually no processing. The downside is that with frequent watering, the roots of plants can rot.
4. Glass. "Like" all plants, but heavy and fragile.
5. Handy materials. You can’t list all the materials, so this includes absolutely “any garbage”, from broken drywall to a punctured wheel. It all depends on your imagination.

Editorial tip: in search of suitable materials, look in the country house in the utility shed or in the attic of the house.

From simple to complex

It is best to start from simple to complex. You can make, as mentioned above, from anything. Do you have extra bricks left over from building a house or a garage? So, don't throw them away, paint them, and plant flowers in them.

Since childhood, many readers remember the flowerbeds of tire wheels, which were practically not even painted. But now, when any finishing materials are commercially available, it will not be difficult to decorate any tin can, car tire or box.

plaster pots

To create a masterpiece, you need water, gypsum, two plastic containers. The algorithm for creating a pot is as follows:

1. Mix gypsum with water in a ratio of 2:1.
2. Lubricate the large container with oil on the inside, and the smaller one on the outside.
3. Place a smaller container in a larger one, leaving a gap between them, do not forget about the bottom part too.
4. Pour the plaster gradually.
5. Align the "vessels" inside to even out the walls of your pot.
6. Wait 2 days.
7. Once dry, peel off the plastic molds.

The result is the most ordinary white pots. Then it remains to paint, paste over with foil or make the finished product using the decoupage technique. Give free rein to your imagination!

Cache-pot from a piece of wood

From the most ordinary piece of sawn logs, you can also make an original flowerpot, which will look very nice on a stone path in front of your house. Alternatively, you can put it in pots and set it on stumps, or use the stumps as flower beds for growing petunias.

Hanging planter

So we got to the most complex and beautiful planter, whose appearance is able to arouse the admiration of neighbors in the country. First, you need to make the pot itself (we learned how to make it earlier). Later you will need the following materials:

• threads, twine or thin ropes;
• metal ring, eyelets with a diameter of 4-5 cm;
• wooden bead with a diameter of 2-3 cm;
• colored buttons (coat) 24 pcs.

And if you were fond of macrame as a child, you can perform it in this technique.


The advantages of this type of pot are as follows:

• improvised materials are used for its manufacture, which means that the cost of the cache-pot is small;
• can be done even by a child;
• does not take up space on the windowsill;
• ampelous petunias will appreciate the new place of residence.

small bonus

If you have not found anything for yourself and you are missing any ideas, you are provided with a small photo bonus from various and unusual planters.

We hope that now you have ideas for creating your own pot. To get started, dream up and create something similar, and in the course of creativity, ideas will appear by themselves.

See interesting video how to make a planter and a pot of gypsum with your own hands: