What does the roller look like. Paint rollers. Types and sizes. Paint roller: types

The most commonly used equipment during repairs is a conventional roller, as it allows you to work with a large area and at the same time limit the consumption of paintwork materials, maintaining the desired layer thickness and uniformity of coverage. Before you start working with this tool, you need to study the technology, roller to achieve the best quality.

However, rollers come in different types, sizes and are made of different materials, each of which is used for a certain type of work and paint. Therefore, in order to qualitatively paint the surface, you need not only to be able to use the tool, but also to choose it correctly.

In most cases, it is better to entrust repair work to qualified specialists who already have enough practical experience and can guarantee the result. But it is far from always possible to hire third-party specialists, and you have to. If you do not know how to paint walls with a roller, then before starting work it is better to study special literature or get advice from a friend who already has similar experience. In any case, you should thoroughly study the technology and strictly adhere to it, even if some things are not entirely clear to you.

Choosing a paint roller

There are several different types of paint that are used for certain types of surfaces. In this regard, it becomes necessary to use different types of rollers for efficient operation. In order to, it is necessary to study the main types of rollers and understand for what purposes they are used. According to the type of material used in the manufacture and scope, all rollers are conditionally divided into several main types:

• foam;
• fur;
• filamentous;
• velor.

Foam rollers can be called a universal product, since they can be used. They are most effectively used to work with various varnishes, as well as water-based or adhesive-based paints. It is impossible to use a foam product for working with emulsion or oil paints, since the solvents included in their composition destroy the foam rubber and the tool quickly becomes unusable.

Fur tools are also used on ceilings. Suitable for enamels and oil-based paints. These products differ from their counterparts in high wear resistance and long service life. This tool can effectively work with surfaces that have small depressions or cracks, since the fur base allows you to penetrate all the bumps and apply a uniform layer. Before you paint the walls with a roller, pay attention to this type of tool.

Rolls of thread are suitable for working with most types of paints and varnishes. Their main feature is the ability to easily clean the tool from the working mixture and reuse it with a different type of paint, but they also have their drawback. Due to the use of threads in the manufacture, the coloring matter is splashed and it is necessary to have a lot of experience in order to cover the surface qualitatively without damaging the surrounding objects.

A velor roller would be the best option for beginner painters. It is used to work with emulsion and oily substances, but it does not absorb the working mixture well and requires its constant renewal. It is usually used for decorative purposes, as it provides an even and smooth layer of colorant.

According to the design, the rollers can be divided into three main types:

• facade;
• textured;
• combined.

The facade roller is designed to work from the outside of the building and its internal mechanism has a special bearing, which is specially installed to reduce speed and prevent splashing of the working mixture.

Textured products can be made from various materials, such as:

• rubber;
• metal;
• plastic;
• silicone.

In some cases . Such products are designed for applying paints and varnishes to the treated surface and at the same time creating textured elements in the form of patterns, ornaments or randomly arranged geometric shapes. Such rollers are used for decorative purposes for applying a finish.

Preparing for painting

Before applying the paint with a roller, you need to provide yourself with additional accessories to achieve maximum quality. Such accessories can be:

When choosing a tool for work, pay attention to the material and surface quality. For example, for smooth surfaces, you can use a roller with a fine pile, but if the surface has a large texture, then the pile should be of medium or large length to thoroughly paint all the recesses and bulges. When painting surfaces with glossy paints, it is better to use a tool with a fine pile and good quality, since on low-quality products the pile begins to fall out and stick to the surface, which negatively affects the aesthetic appearance.

Painting process

Before painting the walls with a roller, it is necessary to protect the surrounding area from accidental ingress of the working substance with the help of a special building film. It is also necessary to wear overalls, goggles, gloves, a headgear and a respirator. If possible, it is recommended that the room be adequately ventilated to remove toxic fumes.

It starts from the top, gradually moving to the lower sections. Before work, it is necessary to conditionally divide the workspace into sections and process each of them separately. The roller must be lowered into a container with paint and soaked well with the working substance. Then it is necessary to roll out the tool on a special corrugated surface in a container, this will ensure an even distribution of the coloring matter over the surface of the tool and remove the excess mixture, preventing splashing.

When painting large surfaces, the movement of the roller should be from top to bottom with a slight diagonal shift. This is done so that each next colored strip overlaps part of the previous one and does not form clear separations.

Video on how to paint with a roller:

To achieve the maximum quality of the final result, it is necessary to remember the basic rule - it is better to apply several thin layers than one thick one. Apply the paint material evenly, rolling the roller over the surface as much as possible. After the first coat has been applied, allow it to dry well and then proceed to apply the second coat, and then the third, if necessary.

After finishing painting, the tool must be cleaned of the working substance with running water or solvent, depending on the type of working mixture used.

Conclusion

Almost necessarily provide for the use of paint to update some areas of the room. The painting process may involve the use of various tools and equipment, ranging from a conventional paint brush to spray guns. The choice of tool directly depends on the type of paint used, the technology of its application and the area to be treated. Try to strictly observe safety precautions during work and technology - this will guarantee a quality result.

For many centuries, the painting and painting business did not know other tools than ordinary brushes of various sizes. The invention in 1940 by a Canadian from Toronto, World War I veteran Bricky Norman of the paint roller made a small household revolution, greatly facilitating the difficult process of repairing houses and apartments.

Despite the fact that the paint roller in the shortest possible time gained wild popularity all over the world, its invention did not bring great commercial success to the legally illiterate Brika Norman. More experienced in business matters, American Richards Adams, having felt the full benefit of the situation and slightly changing the original design of the unlucky Norman's instrument, patented the novelty. Norman Brikey received only the posthumous title of Great Citizen of Canada in memory of his contribution to the refinishing business. So what types and sizes of paint rollers exist today? Let's find out!

General design principles

Having become familiar in every home and indispensable in the arsenal of both professional painters and amateur home craftsmen, the paint roller for painting has, in essence, a very simple design.

A curved holder-bracket with a handle (byugel) for a comfortable grip, on which a cylinder dressed in a special "fur coat" rotates on a bearing mechanism - no electronics and wires, but how much benefit for all mankind! By changing the different options for working coatings depending on the type of paint, the user receives a device that significantly increases labor productivity.

When buying, you should pay close attention to the handle, the fastening of which should not interfere with easy rotation and change of the working surface of the fur coat. If a roller held across the palm of your hand leaves a significant amount of pile, you should give up the desire to purchase such a low-quality tool.

In Soviet times, GOST 10831-87 was developed for paint rollers used in construction, which defines the technical requirements and conditions for their production. And to this day, this GOST is tacitly adhered to by many domestic manufacturers of painting tools.

Designed for painting or applying glue, the roller is lightweight and easy to operate.

And the last rule: high-quality rollers of long-established brands of building paint tools roll the paint the same way both forward and backward.

Classification of rollers of different types

When buying, you must first consider what kind of specific work they will have to perform. There are also several classifications of paint rollers depending on the design features:

• to size(length + core diameter) - mini, medium, large or facade;
• by hull type- solid (usually plastic, sometimes aluminum and impregnated cardboard) and wire, with increased elasticity to successfully overcome the unevenness of the painted surface;
• by mounting type- cantilever (the bracket is attached to the handle on one side) and fork (the plate bracket is attached on both sides, this type is usually used for painting the floor);
• by shift– removable working surface (fur coat) and non-removable (glued and hot glued);
• coat type- natural fur with different lengths of pile and artificial.

Each brand manufacturer tries to make its own painting tool for a specific type of work and using unique technologies and materials.

Now more about sizes.

One of the main parameters that affect the purchase of a paint roller is the size of the tool itself. It is determined by the width of the working part and varies in the range of 50-300 mm with a possible diameter of the rotating cylinder of 40-110 mm. In accordance with these indicators, all rollers can be divided into:

• mini rollers, the width of which does not exceed 150 mm with a diameter of about 15 mm, are intended for painting small areas, surfaces with complex terrain, as well as hard-to-reach places and corners. The material of the coat can be completely different in texture.
• midi rollers - medium in size (width of the working cylinder 150-250 mm with a diameter of 50-90 mm), are considered universal and suitable for almost any household work: painting even and relief weakly expressed planes, leveling and painting wallpaper after pasting. Fur coats, as a rule, are made of foam material or synthetic fur; standard universal rollers of this type are most popular among craftsmen of any level of professionalism;
• facade rollers (width more than 250 mm with a diameter of 80 mm or more) belong to a professional tool and are used to perform various kinds of facade work on painting surfaces that are rough in texture with a large proportion of irregularities. Despite the improved bearing systems, working with such a tool requires certain skills: greater absorption of paint by a wide working surface leads to an increase in the weight of the entire tool and, as a result, to increased fatigue.

Choosing a paint roller in size should be based on the intended work and your own skills and abilities in handling this tool - for most household work, a medium-sized roller can serve as the best option.

Different rollers are needed, different rollers are important.

For each type of painting and painting work, you can choose the appropriate type of roller, the material of which will give the expected effect. Models with an interchangeable working surface allow you not to change the tool completely.

The roller is foam rubber (polyurethane foam). Polyurethane foam absorbs a lot of paint due to the foamed fine-mesh structure, gradually exposing it to the surface - this significantly increases productivity, but requires accuracy: if you press the roller too much, the paint will simply flow.

One of the serious problems due to the same surface cells was the formation of bubbles in the layer of applied paint - a production solution to the issue was the application of a short synthetic pile on an artificial base.

Perfect for water-based paint jobs. However, it is very sensitive to organic solvents that corrode the foam surface, and therefore will not last long when working with enamels, varnishes and oil paints.

Roller made of polyamide rope syntax. Designed for processing both smooth and uneven, rough surfaces. Suitable for all types of paints and varnishes, it is particularly resistant to aggressive media and has a high degree of absorption of paint or varnish. The quality of surface coloring is directly proportional to the length of the polyamide pile, which varies from 8 to 20 mm.

Perfectly absorbs and evenly distributes on surfaces of any type of smoothness, incl. and painting fiberglass, consumables for water-based painting or with a limited proportion of aggressive components. According to its characteristics, it is similar to the polyamide roller, the length of the polyacrylic pile is also different.

Polyester roller. Polyester is one of the cheapest materials used to make fur coats. Cheapness is explained by the fragility and caking of synthetic fibers, and, therefore, the general fragility of the working surface. It is used for applying dispersion and acrylic paints for walls and ceilings, as well as outside. It has excellent coloring properties along with wool models.

Velor roller. Designed for varnishes, water-dispersion and oil paints always gives excellent results on a flat surface, resistant to solvents. When painting, it absorbs little material, which helps to avoid splashing. Ideal for the final stage of painting and rolling the finish coat.

Flocked roller. In terms of functional characteristics, it is a kind of synthesis of a foam rubber roller and a roller with a short pile. Durable, water-resistant and environmentally friendly material is perfect for water-based varnishes, but will be completely spoiled by water-based construction paints. As a rule, it is applied to rather smooth, small area of ​​surfaces.

Fur roller. Made from natural sheepskin or, as a more exotic option, llama wool, it is suitable for working with all types of paints and for all types of surfaces. Work with oil paints, varnishes and enamels is especially effective. It is not recommended to use for paints based on slaked lime, corroding natural fur.

A special type of rollers - angular, designed for places that are difficult to reach with a conventional roller: concave corners, architectural niches in a room, surfaces that are uneven in height, etc. It is a wheel with a working surface on the handle, located at a convenient angle.

With panel rollers it is convenient to apply panels from polyamide material that do not require stencils or a special stencil ruler.

roller-scissors very suitable for painting pipes of various diameters, railings with narrow crossbars, as well as stair and balcony railings.

The roller is needle for self-leveling floors. It is used for work with viscous materials for painting and self-leveling floors. A distinctive feature of such a tool is the presence of plastic spikes (needles) on its working surface, which help to remove air bubbles between layers of paint: the solution will lie as evenly as possible, become durable and will not crack over time. Rolling with a spiked roller is technologically necessary if cement or gypsum is present in the composition of self-leveling floors.

For more than seventy years since its birth, the paint roller has firmly established itself in human life, turning out to be an affordable, convenient and indispensable assistant in the construction and repair industry.

Painting is one of the easiest ways to update a ceiling surface. Such a simple, but very effective type of home repair is available to almost everyone who knows how to hold a roller and a can of paint in their hands. However, sometimes, behind the obvious elementarity of a process, there are multiple pitfalls, and the final result directly depends on how you overcome this barrier. How to paint the ceiling with a roller? A simple and complex question at the same time, the price of which is your satisfaction from the work done. We offer the most useful tips for choosing and some painting secrets.

1. What determines the choice
2. What rollers are
3. Useful tips for choosing
4. Conclusion

What determines the choice

"Don't think down the tools"- a paraphrase of a quote from a well-known song that has already set the teeth on edge here is just right. Most people who start repairs are very frivolous in choosing the necessary tools. Especially when it comes to painting. Here, the whole narrow-minded fantasy comes down to acquiring the first roller that came into view in a hardware store.

It’s also good if, before buying, a person holds it in his hands, checking for a comfortable grip. However, often this moment is also successfully dissolved in a hasty desire to buy everything necessary and start (finish) the repair.

• type of surface to be painted;
• the quality of the paint used;
• the nature of the prepared surface.

The ideal type of surface for uniform coloring with a roller is drywall. It perfectly absorbs any kind of paint, stably keeping the chosen color. True, before direct painting, it would be useful to walk along the entire ceiling surface with an acrylic-based primer, which will somewhat reduce the absorption rate of the cardboard sheet. And in this article you can learn more about the features of painting the ceiling with water-based paint.

Most often, ceilings are painted with water-based or water-dispersion paint, which brilliantly retains color, is not afraid of moisture and is generally absolutely safe for humans.

Depending on the type of ingredients used, it can be acrylic, silicate, latex. The answer to the question of which roller is better to use for painting the ceiling, in each individual case, will directly depend on the choice of paint type. So, water-dispersion paint is great for painting plastered surfaces, which means that we will select the tool, taking this fact into account.

In addition, the choice of roller is also influenced by the overall quality of the prepared surface. How ready is she for coloring? Are all cracks sealed? What are the gaps between the sheets when it comes to plasterboard ceilings? What primer was used to finish the ceiling surface? All this is just a small part of the questions, knowing the answers to which allows you to correctly determine the tool in each individual case.

What rollers are

Trying to sort out all the rollers for sale on the shelves is still a gamble. The fact is that a variety of criteria can serve as a starting point for classification. Starting from the type of fur coat used and ending with the size of the drum. All this ultimately affects not only the speed of the work, but also the immediate convenience at the same time. Let's try to systematize the accumulated experience and sequentially go through each of them.

Handle size

As a rule, in rollers of domestic production, this indicator fluctuates within 30-50 centimeters . Experts note that it is these dimensions that allow you to confidently hold the roller in your hands and carry out uniform painting. If the task is to paint individual elements, and not the ceiling as a whole, then you can choose a roller with a smaller handle - 15 centimeters . As a rule, the manufacturer of such products are foreign companies.

A great option is a tool with interchangeable handles, one of which is short and the other, on the contrary, is long. Such a roller can be successfully used to perform a number of completely different tasks.

Drum size

The standard drum size in modern rollers is from 20 to 40 centimeters . Of course, you can always find options both smaller and larger, but such tools cannot be called universal, since they are not very convenient for general painting and are more suitable for use in solving a local problem associated with painting visible decorative elements of the ceiling surface .

Drum design

The drum can be mounted on the body of the roller both on one side and on the other. By all accounts, the first option is preferable, as it allows you to change the drum coat over time, making the tool suitable for solving other problems.

The double-sided design, alas, significantly limits your “user interface” and you cannot change the fur coat.

coat type

Probably one of the most important indicators that should be taken into account when deciding on a tool.

• fur;
• foam;
• polyacrylic;
• polyamide.

The advantage of a fur coat is in saving paint and its uniform distribution over the entire surface. The natural fibers used to make these coats have a reference absorbency, but are easily wrung out during the dyeing process. Of course, the final usability is correlated with the length of the pile.

Longer pile allows you to absorb more paint and apply a much thicker and more thorough layer. It uses a strong and thick thread. In rollers with short or medium pile, the thread is much thinner, and the surface of the ceiling after processing with a roller will be covered with a thin and even layer of paint.

Now correlate the information received with what you want to see the ceiling surface in the end - and make the right decision.

Foam rollers are best used when you are aiming to create some texture, relief on the ceiling. They are perfectly “friendly” with oil paint, which has the most dense high-quality structure.

As for polyacrylic and polyamide rollers for painting, the main area of ​​their use is decorative work. To emphasize some curious detail on the ceiling, to freshen up the color mood, to diversify the fragment - just such a roller should be used to paint the ceiling if your goal lies in this plane.

Current prices for ceiling rollers

The most popular ceiling paint rollers and their cost are shown in our table.

Name	Price per piece
Faux fur roller with handle 250mm SIBRTEH 80114	93 rubles
Natural fur roller 200mm SIBRTECH 80128	53 rubles
STRUCTURED foam roller with handle, MATRIX MASTER, 80221	288 rubles
Polyacrylic roller FIT mini 02693	102 rubles
Roller with plastic handle, 250 mm, pile 18 mm, D 40 mm, MATRIX 80887	128 rubles
Roller ANZA PLATINUM Anteks 250/38 mm 580025	379 rubles

1. avoid using rollers with a plastic handle - as a rule, it is not very durable and does not withstand high pressure;
2. complex relief patterns can be decorated with a velor roller - for this you need to perform intermittent and sharp movements during the painting process;
3. also for the decorative design of the ceiling surface, you can use special rollers with ready-made patterns on the surface of the drum;
4. when buying a roller in a store, buy several replacement elements right away - this will save you time later when the roller becomes unusable and you will hastily pick up a pen or a fur coat for undeformed parts;
5. ceiling paint rollers are often equipped with a special container, which is fixed on the axis of the tool - it is there that all excess paint flows down, which makes the painting process as convenient and non-irritating as possible.

masterpotolok.com

Paint roller design

There are paint rollers with different structures. There are three main types of forms:

1. The simplest and cheapest rod pen. You can put a finished roller on it.
2. Rod handle with side holders that serve to replace the roller coat.
3. Frame handle equipped with a special shock-absorbing holder.

What are the types of rollers for painting surfaces

At home, you can use different rollers. First of all, they can serve for walls, floors and ceilings. By purpose and type, the following paint rollers are noted:

• foam;
• polyacrylic (velor);
• fur;
• polyamide from twisted threads;
• textured;
• wallpaper rollers;
• frame;
• facade.

To understand all their differences, you should familiarize yourself with each type separately.

foam rollers

These inexpensive synthetic polyurethane rolls are short lived and not suitable for active formulations. In particular, they are used for priming and painting surfaces with water-dispersion paints. But they are easy to use and affordable. They can be washed and dried quickly. Fur coats are easy to change, so this option is quite practical and helps save money. Thanks to the foam rollers, the paint is applied evenly and accurately. Can be easily painted on the sides and in hard to reach places if the size of the roller allows.

Polyacrylic (velor) rollers

This type is ideal for paints, water-based and oil paints. Despite the light fleecy texture, no fluff from the roller remains on the surface. The paint is applied neatly and evenly thanks to the velor roller. It can be used for ceiling, walls and other smooth surfaces.

Fur rollers

They are made from natural sheepskin or polyester-based faux fur. The roller has a hard fleecy surface, so it is great for enamels and oil paints. The length of the pile should be chosen depending on the type of surface. If the wall is not smooth, but rather porous or rough, then you should pay attention to a roller with a long pile. They can paint walls, floors and other surfaces.

Polyamide rollers

There are different pile rollers and polyamide ones are one of this category. It is they who have the longest pile, so they are suitable for painting such rough surfaces as putty, drywall and the like. They are relevant for water-based enamel paints.

Textured rollers

If you are not satisfied with just a smooth surface, but do not want to use wallpaper, then you should pay attention to embossed rollers for decorative plaster, wet putty and the like. They have a design similar to all ordinary rollers, but at the same time they do not have a soft fur coat, but only a rubber base with some kind of pattern. There are many different options that you can choose according to your taste and preferences.

Wallpaper rollers

This type of roller is used for wallpapering. During wallpapering, air may linger under the canvas, as a result, it must be removed from there. For this, a special roller with a fairly rigid surface serves wonderfully. With it, smoothing the wallpaper will not take much time. After use, it can be easily washed and dried quickly.

Frame rollers

These rollers are called frame rollers because they are made differently from all the others. They are not just wearing a finished coat. There is a fully finished frame on which a soft coating is attached. When used, the roller absorbs less ink. Their cost is low, but they are good to use.

Facade rollers

They are distinguished by a long pile and the presence of a special intermediate padding, which slows down the speed of rotation of the roller. This contributes to better painting and the absence of splashes during painting.

What to look for when choosing a paint roller

Arriving at the store, it is difficult to analyze the quality of the roller solely by its appearance. By no means all sellers have personal experience in using paint rollers, so they can only advise on manufacturers, price and similar characteristics. The paint roller should be chosen correctly so that it is convenient to use, and the result obtained fully satisfies expectations.

Here are some tips to help you choose the perfect paint roller:

1. When painting the ceiling, you should choose a light tool so that your hands do not get tired in the first couple of minutes. Ideally, long-handled rollers are suitable for the ceiling so that you can paint while standing on the floor, but they weigh a lot and are more suitable for professional painters.
2. For walls, the weight of the tool is also essential. Take, for example, a fur roller. After impregnation with paint, it becomes even heavier, and it is very difficult to use it for a long time without good physical condition.
3. Coat colors may also vary. It is much more convenient to work with a white fur coat or any other. Rollers with dark pile tend to shed over time, while long pile of low-quality rollers can remain on the wall along with the paint.
4. Make sure that there are no seams on the fur coat, because this will cause discomfort during painting. From such rollers, traces remain on the surface. Of course, they can be removed, but for this you will have to apply another coat of paint, and maybe more than one.
5. Feel free to test each handle for strength. You can press on the roller in order to understand how hard it is, whether it bends during use. Also, the handle itself should be comfortable, for this you need to hold it in your hand.

The most important thing when using a paint roller is that the painting process is simple, and the surface is well painted even after the first coat. At the same time, I want the cost of the tool to be low. A huge selection of options in hardware stores fully fulfills all the requirements of buyers, so feel free to go looking for your roller, armed with our tips.

www.domechti.ru

What kind of roller to paint the walls

Before you start choosing a paint roller for painting walls, you should decide on the type of paint. The type of roller itself largely depends on this. For example, you can work with water-based paints foam roller. It is also suitable for applying various water-adhesive compositions (primer, wallpapering). It is not recommended to apply emulsion paints with such a roller. Foam rollers are the most inexpensive of all. Their main disadvantage can be considered fragility. In addition, they cause a lot of splashes if you work vigorously.

Which roller is better? Making a choice

To work with various types of paints, including those that have an organic base, rollers with fur, velor, and thread surfaces are well suited. These materials absorb a relatively small amount of paint, apply it more evenly to the surface to be painted, do not splatter or create streaks (streaks).

When painting walls, it is important that the paint layer is uniform. Deal with it well fur rollers. In addition, they perfectly paint over various wall surface defects (small irregularities, cracks, depressions, chips). The minus of fur rollers can be considered their ability to climb, leaving "hairs" on the painted surface. This mainly applies to cheap tools.

How to paint the walls and ceiling with a roller? Fur checked by time

Velor rollers have characteristics similar to fur. But they create an even more uniform layer of paint. After applying them, the painted surface looks completely smooth. This type of roller is used for responsible work on painting walls. They say that this is a roller for real professionals. If a beginner uses a velor roller, any marriage is noticeable on the walls. By the way, this tool is optimal for applying varnishes.

Velor roller

In the case when quality is not as important as the speed of work (for example, if the surfaces have a very large area), it is convenient to use thread roller. When working with it, remember that too high a speed of rotation of the cylinder can lead to splashing of paint. Therefore, it is better not to rush too much. The thread roller gives the painted wall a pleasant texture.

Thread roller for walls

Choosing a roller for painting walls: pile length

There is a rule: the rougher the surface of the walls, the longer the pile of the “fur coat” should be. A roller should be long-haired, with which it is planned to paint a relief surface (for example, textured plaster or wallpaper imitating it). Long pile paints well various notches, dents, depressions. For smooth walls you need a short pile roller! This is important: if you use a long pile roller on a smooth surface, smudges, streaks and uneven color may occur.

How to paint the ceiling with a roller

The roller for ceilings must be selected according to the same criteria as for walls. Typically, a ceiling roller, unlike a wall paint tool, has a relatively short or medium-sized handle. The requirements for the quality of painting the ceiling are usually higher, so the roller must be chosen carefully. Most often, for painting ceilings, rollers with a slightly elongated soft pile are used. It is very good if such a pile is made from natural materials, for example, from wool. Too short pile picks up insufficient amount of paint. You can use a foam roller for the ceiling, but this is not the best choice: it forms "bubbles".

The paint applied to the roller must not be rolled directly on the ceiling, as this will lead to an uneven layer. First, it must be rolled out on a sheet specially prepared for this from linoleum, hardboard or other similar material. It can also be a special paint tray if the size of the roller is small.

www.domfront.ru

Paint roller: types

On the modern market, there are paint rollers suitable for various types of repairs and paintwork. In order to choose the right roller for painting with water-based paint, it is better to first of all pay attention to the material from which the product is made.

To cover the surface with water-based paint, you need a roller consisting of the following materials:

• pile;
• velours;
• foam rubber.

Rollers from different materials are within the same price category, so it is quite difficult for an inexperienced buyer to choose. Feel free to ask sellers and consultants which roller is better and what features of operation are typical for each of them. The material from which the roller is made directly affects what the final result of painting will be.

The final result of painting depends on the material from which the roller is made.

From foam rubber

The main advantage of using foam rubber rollers for applying water-based paint is the low cost, as well as the ability to purchase them in any, even the smallest, repair shop. One roller can be made from several types of foam rubber.

Pay attention to the percentage of high-density foam, it is he who provides resistance to mechanical stress.

However, foam rubber products have their drawbacks:

• the roller absorbs more than necessary, the amount of paint, which is unprofitable from the point of view of the rational use of materials;
• due to excessive impregnation of foam rubber with water-based paint during work, a large number of bubbles may form on the surface and the coating will be uneven.

The main advantage of foam rollers is their low cost.

Velor

It is advisable to choose such a roller for painting a flat, smooth surface. Velor is a synthetic material and products made from it are much cheaper than, for example, mohair rollers. Also, the undoubted advantage of velor rollers is resistance to the aggressive effects of solvents.

However, the inconvenience in using this type of product lies in the fact that velor poorly absorbs water-based paint. In order to achieve an even, uniform coating, you will have to dip the tool in the coloring solution too often, which presents a lot of inconvenience to the painter.

fleecy

Pile rollers are best suited for painting with water-based paint. In order to determine what length of pile to choose, you need to clearly know the characteristics of the surface to be painted. For hard surfaces, it is better to stop at the purchase of products with a long pile.

If you are not well versed in the intricacies of painting, then buying a product with an average pile length will be a win-win option.

The material directly affects the cost. Rollers made of natural fur or felt will cost more than artificial substitutes. The quality of the material of the fur coat determines what the result of painting will be, so you should not save.

Pile rollers - ideal for painting with water-based paint

Advantages of pile rollers:

• the ability to correct paint absorption using different pile lengths: by choosing a roller with a long pile, you can immediately cover the surface with water-based paint with a thick layer, and in order for the layer to be thin, you can purchase a product with a short pile;
• implementation of decorative painting work: for such purposes, rollers with a short pile are best suited;
• natural fur coat material ensures long-term operation;
• The long pile roller is indispensable for uniform coverage of rough and porous surfaces.

Other selection criteria

Having decided on the type and material of the coat, you should not immediately rush to the checkout. The quality of paintwork is also affected by the size of the paint rollers. If a fairly significant amount of work awaits you and there are several types of surfaces, then one roller of a certain size is unlikely to satisfy you.

Before buying, you need to check:

1. The quality of the seams on the coat. The accuracy and smoothness of the seam determines how evenly the paint is distributed over the surface. Rough seams indicate a poor quality product and will leave marks on the painted surface.
2. For fluffy products, it is advisable to carry out such a check: lightly squeeze the pile with your fingers and pull it towards you. If the material is of high quality, then the villi will not fall out. If, after checking, you notice that the pile is easy to pull out, then it is better to choose another product.

1. For ease of use, the handle is of great importance. It should be comfortable, easy to squeeze and not slip in your hand. For painting walls or ceilings, it is desirable that the handle can be extended.
2. Some manufacturers also offer a set of interchangeable fur coats. This is very convenient for practical use. If the tool is damaged during the paintwork process, its fur coat can be immediately replaced. The cost of the product is much higher than that of products with glued fur coats, however, when worn, the handle does not need to be replaced.
3. There are also rollers with limiters and regulators. The presence and quality of auxiliary parts affects the price category of the product.

When choosing a size, it is better to be guided by the principle of correspondence - the larger the surface, the larger the tool and vice versa. Also keep in mind that when impregnated with paint, the roller will become much heavier. This is important to understand in order to ensure the convenience of future work.

kraska.guru

Convenient design

The device of the roller is quite simple: it consists of a light metal or plastic cylinder, on which a special coating is put on (the so-called fur coat). A handle is attached to the cylinder, which can be of different lengths. This simple and time-honored design keeps the roller as the most popular painting tool for applying any type of paint to a wide variety of surfaces (excluding curly surfaces). The tool is used to work with oil, water-based, acrylic, acrylate and latex paints.

The versatility of the tool also lies in the fact that it can be used to apply glue, antiseptic, primer and other liquid mortars.

What is more convenient - a roller or a brush?

The paint brush has its advantages in repair work and remains an indispensable tool for painting a wide variety of surfaces. The use of the brush allows us to paint the most inaccessible places, covering elements of any shape.

However, when it comes to the ceiling, which is a flat plane, the use of a brush is not advisable: the roller provides a smoother finish, speeds up the work, makes it easier and more efficient. The contractor is less tired and generally does the job of painting the ceiling much faster.

A brush can come in handy only if the ceiling is a curly structure and you want to paint over the corners and hard-to-reach places with high quality.

What should I pay attention to when buying a roller?

There are several parameters that you should pay special attention to when buying a roller; these include:

• pile length;
• coat material;
• cylinder diameter;
• roller width;
• handle length.

The type of coating and the length of the pile (if we are talking about pile materials) are especially important when choosing a roller.

What material is better?

If you are painting the ceiling with water-based paint (which is most often observed due to the suitable characteristics of this type of building material), then it is preferable to choose a roller with a long pile. Such a tool has good absorbent properties and can provide a smooth surface and dense paint. A short pile absorbs less solution, resulting in a less dense layer, which forces the performer to dip the roller into the paint more often.

However, with all the advantages of a long pile roller, such a tool does not give a perfectly smooth surface, so it should be used for the lower layers. The final layer is best done with a new roller with an average pile length.

Foam rubber and velor rollers have their drawbacks when painting the ceiling: foam rubber absorbs a small amount of paint, which makes it inconvenient to use. Velor can leave air bubbles.

Table number 1. Types of rollers according to the type of coating material.

Type of roller cover material	Advantages	Flaws
Sheepskin	Natural wool is suitable for any surface and any type of paint. Allows you to get an even coating, applies a fairly thick layer (you will need to apply literally two coats of paint).	High price. Large weight of the product (the hand gets tired faster). Falling out of the villi.
Nylon plush	Light weight tool. Provides high quality, even coverage. Lower cost compared to sheepskin roller.	Divorces may remain. Requires certain skills to use.
Foam rubber	Allows you to save paint. Suitable for many types of paint (water-based, oil, acrylic). Light weight (hand does not get tired). Great for oil paint.	It does not always give a perfectly flat surface, often there are stains. Ensures the application of too thin a layer of paint. Requires experience. Short-lived. Not suitable for applying paint based on synthetic resins.
"Golden thread" (pile reinforced with metal thread)	Durable. Paint resistant. Does not deform during operation.	High price.
Decorative skin	Gives a beautiful pattern, unique ceiling surface. Used for final coverage.	The roller is intended solely for creating a decorative surface. Has a high cost.

Roll size

The ceiling area can be very large, so the use of a roller of small diameter and a small cylinder width may not be practical. Therefore, it is usually recommended to purchase a large roller. There is one “but” here: such a painting tool can be heavy. Please note that you will have to work for a long time, holding the roller on weight. And after absorbing the paint, it becomes even harder. Therefore, we recommend choosing a medium roller (up to 30 cm wide), which is more convenient to use, since it is easier to keep it on weight.

Another point is the shape of the ceiling. It can be curly, multi-stage. It is difficult to paint over such a shape with a large roller - you will need a medium-sized tool. Perhaps, the arsenal will have to be supplemented with small rollers and paint brushes of various sizes.

Modern manufacturers offer the most advanced roller designs: you can find rollers with a special telescopic handle (retractable) in hardware stores, as well as tools designed specifically for painting the ceiling and having a special trough (tray) for draining excess paint.

Also, in order to save money, manufacturers offer customers replacement elements for roller handles. This is a smart choice, because the handle of the roller lasts much longer than the skin itself, and by buying replacement skins, we save on the metal base of the tool.

Video - Choosing a paint roller: types, sizes, features

How to choose a quality tool?

In order not to be mistaken with the quality of the tool, test the roller directly in the store. So you can protect yourself from acquiring low-quality things. Of course, the price already says a lot. A more expensive roller will last longer and provide a smoother finish, while an inexpensive tool may be short lived and require more time and effort to create an attractive ceiling finish.

The required actions are listed below.

Step 1. Try to check how strong the instrument you choose is. Squeeze the roller itself: will it deform? If yes, then it is better to pay attention to another model.

Step 2 See how well the roller is made for you. If a seam stands out on a fur coat, then such a tool will not be able to provide a high-quality coating on the ceiling surface (traces may remain).

Step 3 If you choose a roller with a long pile, just try to pull it by the pile and see how strong the material itself is. Is there any lint left in your hand? If so, this is a reason for doubt. Might be worth considering a more expensive option.

Instructions for painting the ceiling with a roller

The process of painting the ceiling with a roller is not difficult, you just need to use high-quality materials and act in accordance with the instructions.

Table number 2. How to paint a ceiling with a roller.

Steps, illustrations	Description of actions
	Prepare the surface. Remove layers of old paint. You may need to wash the ceiling with special products and wait until it dries completely. Also, if necessary, the ceiling is leveled (using putty) and cracks are repaired.
	Remove mold marks (if any). Treat the surface with special antiseptic agents. Wait for drying.
	Apply primer. This stage will improve the quality of the surface and extend its life.
	Prepare the paint (dilute it or just mix it, depending on the manufacturer's recommendations - look for them on the package). Mixing is best done with a drill equipped with a special mixer attachment.
	Prepare a tray for rolling paint with a roller (or a fragment of old wallpaper, linoleum, boxes).
	Dip the roller in paint. It is recommended to completely lower the roller into the paint so that the entire working surface of the tool gets wet.
	Roll out the roller on the tray (or a piece of wallpaper). It is not recommended to roll it on the ceiling, as this can lead to stains and uneven painting.
	Paint the ceiling area. In order to avoid noticeable irregularities and joints at the boundaries of the plots, it is necessary to paint the ceiling in one go.
	It is recommended to perform smooth movements when painting, do not rush and act too abruptly, as this will have an impact on the quality of the painting - the layer may look uneven. In order to achieve uniformity of the surface, a minimum of verified movements is required.
	Taking breaks is not recommended. You can not tint the drying layer, it is better to perform another full painting.
	If sagging is found, it is recommended to remove them with a dry sponge. Wait for complete drying. Apply another coat of paint.
	Painting the ceiling is carried out in two layers (this is a minimum, 3-4 layers are recommended). To move on to the next layer, you must wait until the bottom layer is completely dry. It is recommended to install a heater in the room to speed up the process.
	The direction of painting of the second and subsequent layers should be perpendicular to the underlying layer.
	For painting corners, as well as decorative elements, you will need a brush.

The final layer must be applied in the direction away from the window.

You will find detailed instructions for painting the ceiling with a roller in this article! We also recommend reading about how to paint the ceiling with water-based paint with a roller.

potolok-exp.ru

Types of rollers

When it comes to a paint roller, first of all, we mean the roller nozzle and the material from which its fur coat is made, because it is the composition and structure of the absorbent material that affects the final result and the quality of the paint and varnish coatings. In order not to be disappointed by the remaining stains, unpainted areas, splashes or bubbles at the end of the work, it is worth understanding the intricacies of selecting a tool.

The working surface of the roller is a fur coat

The working surface of the roller, called a fur coat, is mounted on a cylindrical frame and is made of different materials. When the tool is dipped into a container of paint, the fur coat absorbs the substance and transfers it to the surface to be treated. Depending on the type of work and coloring materials, rollers with different ink output and, accordingly, a different fur coat are chosen:

Rollers with a foam coat suitable for water-based paints and water-based adhesives used for priming and wallpapering. Foam rollers are cheaper than others, but they also need to be changed more often - the fur coat wears out quickly. Foam rubber is afraid of paints and varnishes, which include acetone. When exposed to destructive components, foam rubber swells, deforms and practically dissolves. In addition, the foam roller creates splashes during rapid operation and leaves small air bubbles on the painted surface.

fur roller

Fur coat qualitatively covers unevenness, depressions and cracks ensuring uniform application of paint to the surface. The working surface of the fur absorbs a sufficient amount of paint, does not create smudges, streaks and splashes. Fur is used mainly synthetic, less often - natural sheepskin. The main disadvantage of rollers with a fur coat is the villi that come out and remain on the painted surface.

Velor roller

Velor is a fabric base with a pile imitating plush. It does not roll, does not splatter paint and ensures uniform application of the coloring or adhesive composition. A wall painted with such a roller will look absolutely smooth. Velours excellent for applying oil, alkyd, water-based paints and varnishes and is not afraid of solvents. But this tool is not suitable for a beginner in the construction business, because the slightest marriage will be noticeable.

Velor-coated rollers are mainly used by professional painters for finishing work. In addition, due to the short length of the pile, velor absorbs a small amount of paint, so the tool often has to be dipped into it.

thread roller

The fur coat of the thread roller is made of a large number of threads fixed on a woven base. Such a roller it is convenient when painting large areas and is suitable for any kind of paint and varnish materials. It is comfortable and durable, provided that it is washed well after each use. The thread coat leaves a pleasant texture on the painted surface, but when working with such a tool, you should not rush - the quick rotation of the nozzle contributes to paint splashing.

Advice: Whatever roller you choose, when buying, be sure to check the quality of the clamps and the fur coat - it must be intact, neatly fixed on the base. The roller is considered of poor quality when a pile climbs out of it or threads of different lengths stick out.

Coat fastening method

The working surface is mounted on a cylindrical roller in three ways, depending on which the rollers are divided into glued, hot glued and with a coat on.

AT glued rollers the fur coat is a narrow strip wound and glued at an angle onto a cylindrical roller. The fur coat forms a kind of spiral, the edges of which are connected "butt to butt". Glued rollers evenly paint the walls due to the absence of seams. But they have a drawback - fragility. During operation, the paint destroys the glue and the fur coat “falls off” from the base.

The most advanced technology is used to manufacture hot-melt rollers. In this case, the fur coat is soldered into the plastic base, thereby increasing the wear resistance of the tool.

Rollers with a fur coat They are a base-cylinder, on which a fur coat is stretched, having the shape of a sleeve. In most models, from the sides of the cylinder, the working surface is clamped with end caps, and only small-sized foam rubber coats are held on the base due to the elastic force.

Thanks to removable end caps, a worn fur coat can be replaced with a new one if necessary. Removable fur coats are more durable than glued ones, but they have their drawback. For their manufacture, the material is sewn together, and when applying the coloring composition to the walls or ceiling, the seam may interfere with the uniform distribution of the paint.

Advice: When purchasing replacement roller nozzles, buy several pieces at once. It would be a shame to stop painting if the fur coat suddenly peels off or the end clamps of the roller break.

Roller dimensions

The choice of roller is influenced by the size of the surface to be treated - for a larger area, a tool of greater length and diameter is chosen. Depending on the size, paint rollers can be divided into three groups:

Universal (standard)

The length of universal rollers is 140-250 mm. Professionals consider the 180 mm roller nozzle the best option, so tools with standard sizes are most often used for painting work.

facade

Facade rollers usually have a large diameter and a length of 180 to 270 mm. When impregnating wood, painting a foundation or flooring a large area, a high quality finish is not required, so it is more advisable to use oversized rollers.

small rollers

The length of small rollers ranges from 50 to 150 mm. They are convenient to paint corners, narrow surfaces and hard-to-reach places.

Roll pile length

Replaceable nozzles-rollers are available with a pile length of 4 to 25 mm. The choice of pile length depends on the quality of the treated surface - the more irregularities on the wall, the greater the length of the pile must be applied. For smooth walls, short-haired fur coats (4-9 mm) are used, which will evenly distribute the paint over the prepared wall. If you use a long-haired roller for a flat surface, excess paint will form smudges and streaks.

For embossed wallpaper, textured plaster and rough surfaces, rollers with a pile length of 12-25 mm are used. Due to the sufficient length of the pile, the paint penetrates into all the depressions, recesses and protrusions on the wall. A short pile will not cope with this task and will leave unpainted areas.

Roller design

Depending on the type of attachment of the roller to the handle, the design of the tool is clasp or frame. Let's consider each of them.

Clasp roller

The clasp fastening system is popular and loved due to its versatility and simplicity. The clasp tool consists of a handle with a holder in the form of a metal rod, called a clasp, and a roller equipped with a device for fixing and rotating. Assembly of the clasp roller is quick and easy - the roller is mounted on the clasp, and the tool is ready to work.

The clasp system allows you to use the same clasp handle and change roller nozzles depending on the type of work and paints and varnishes. At the same time, there are no problems with the selection of the diameter of the inner hole: clasp for rollers of standard sizes have a diameter of 8 mm, and for small ones - 6 mm.

Frame roller

The frame roller consists of a clasp handle and a roller in the form of a hollow cylinder-frame, on which the fur coat is fixed. Such a system fixes the frame on a metal rod with the help of plastic bearings permanently fixed on the clasp. In building materials stores, you can buy a frame roller, the fur coat of which is put on a plastic or wire "skeleton". It is convenient to paint over structural surfaces with such rollers - the paint will penetrate into depressions, cracks and recesses.

Frame rollers are not as popular as clasp. The leader in the production of rollers on frames is the Swedish company ANZA. The tools produced by it are of high quality, but expensive, so not every professional will spend money on a branded roller, to say nothing of ordinary people. Although Chinese "clones" are affordable, they become unusable after 2-3 hours of operation.

Roller handle

The handles are made of plastic and give them an ergonomic shape to make it easier for the master to work for a long time. Tool handles are also two-component - made of plastic and elastomer with anti-slip properties. Due to the shape of the handle, the paint does not fall on the hands of the painter during the runoff. Roller handles are easy to store hanging thanks to the holes they are provided with.

Handles come in different sizes, but the length of 25 cm is considered the most convenient for standard work.

This length is recommended when painting the ceiling if the work is carried out from a stepladder or construction goat. The universal shape of the handles allows the use of telescopic rods that can increase the length of the handle by 0.8-4.0 m. Using such extensions, you can paint the ceiling or walls of any height directly from the floor.

In addition, the same handle is used repeatedly, and if the replaceable roller nozzles are worn out, it is enough to buy new ones and fix them on the holder.

Rollers for decorative painting

The peak of their popularity in our country, decorative painting rollers experienced in the 70s of the last century, when, due to a shortage of wallpaper, residents tried to add at least some variety to the boring interior of plainly painted or whitewashed rooms. Now the tasks and the quality of materials have changed, but the technology for applying drawings has remained the same.

A modern paint roller, for all its seeming simplicity, is a design tool and is widely used for decoration - patterned rollers are equally convenient to apply a pattern on walls and ceilings, furniture and wallpaper for painting, fabric and even paper. With the help of such tools, any pattern can be created on the surface to be painted, whether it is an abstraction, imitation of stone or wood, a geometric or floral pattern. Rollers for decorative painting, depending on the material of the roller, are rubber or foam rubber.

On the surface of rubber textured rollers there is a convex pattern, which remains on the painted surface during knurling. Textured roller consists of two rollers- patterned and feeding, adjoining close to each other and fixed on one handle. The feed roller can be fur, foam rubber or velor, its task is to absorb the paint and give it to the patterned one. The textured rubber roller can be chosen with any ornament and replaced if necessary.

Textured rubber rollers are an order of magnitude more expensive than conventional ones, but having bought a tool once, you can use it for quite some time. For long-term use of the patterned roller, it is enough to thoroughly rinse it after every work.

Textured rollers with a foam coat are able to create a geometric ornament or pattern that imitates the structure of natural materials. Foam rollers are short-lived, but their price is low. The advantages of a paint roller can not be overestimated: this simple and versatile tool helps to reduce the consumption of coloring materials, covering the surface with a thin, even layer; reduces the time for finishing work; provides a high quality coverage compared to brushes and brushes.

Velor.

His fur coat consists of very fine pile. It may vary slightly, but everywhere the length of the hairs will be approximately one to three millimeters. It is not suitable for ceilings and walls as it absorbs very little paint. Therefore, painting them is very long, laborious. There will be stripes, missed sections. A large amount of paint will drain, drip. Therefore, increased fluid consumption is provided to you. Grounding them is even more inconvenient.
D Why do you need a velor roller?
It is best suited for lacquer work. He perfectly applies, rolls varnish on parquet, wooden doors, wooden tables. (any wooden smooth, even structures). The varnished surface will be almost the same as from the spray gun.

With large pile.

The length of their pile is from one and a half to two or more centimeters. They are great for structural, embossed decorative coatings. For example facade decorative coatings. Thanks to the large pile, all the pits, ruts, any small irregularities on the surface are impregnated the first time. It is possible to roll out wallpaper paste on walls and wallpaper, but not always. He applies glue in a thick layer, so after smoothing, a lot of glue can come out from under the wallpaper. Also, the wallpaper can be severely deformed and even torn when smoothed. They can be primed, but thick, long hairs do not hold it well. Consequently, a significant portion of the liquid may end up on the floor.

With medium pile.

They are the most versatile of all. The length of the hairs is about one centimeter. It is soft, so it holds even a primer well. Perfectly passes a flat area, decorative coatings with a small relief. The shagreen on the surface after painting remains small, the most optimal. Fur coats for them are also made from natural materials (sheepskin). When painting ceilings and walls, not a single hair falls out on the surface. They are durable and suitable for priming, painting, applying wallpaper paste.

Foam.

We do not recommend painting them. The liquid is strongly squeezed out. Sometimes, instead of spinning, it simply glides over the surface. Foam rubber can roll in one direction. They can apply wallpaper glue, but keep in mind that the old foam rubber is destroyed. In practice, there was one very unpleasant case: after gluing thin, smooth wallpaper in a certain direction of sunlight, the entire wall turned out to be in small tubercles. It looked terrible. I had to change the wallpaper. As it turned out, there were many very small pieces of foam rubber under the wallpaper. Such debris is very difficult to see in the glue, as wallpaper paste has a yellowish tint. But among these rollers there is one for priming absolutely any surface.

He has a thick foam coat. The diameter of the main shaft is only 10 mm. Coat diameter 60-70 mm. They are great for priming any bumps, brick walls, corners. It holds the primer and evenly distributes it over the surface. There are also thin rollers 100 mm wide, with a medium pile.

They are convenient to paint narrow slopes, niches, hard-to-reach places.

Painting is the final stage of finishing. Which roller is better to paint walls with a large area? The correct solution of this issue depends on how much time will be spent on the whole process and the quality of the final result.

The market offers a large selection of tools for painters. You should choose time-tested options. The roller is one of them, allowing you to quickly apply paint in an even layer. Well-painted surfaces give the room an aesthetic look.

What are rollers

Today, the market offers consumers a large number of their different types, differing in purpose. How to choose a roller for painting walls is greatly facilitated by the presence of a clear classification.

It is based on the following features:

• type of material of the painting surface of the roller;
• its texture;
• tool dimensions;
• forms.

High quality tools contain markings in Latin letters on the packaging. The manufacturer thus emphasizes its class by indicating the materials used for its production.

A quality product will allow you to paint the walls without defects

The absence of letters indicates that insufficiently high-quality material was used in the manufacture.

Such cheap products can be used when making home repairs.

A specialist needs a professional tool to paint surfaces on a significant scale.

The table shows the existing species division.

Among artificial types, PE is the softest.

The fur roller is the most expensive

The highest cost for products made of natural fur. Prices for felt and rubber types are at the level of artificial rollers. You should choose them according to your needs, carefully examining them.

Soft artificial fur is used for painting a wide variety of areas, natural wool is usually expensive. The choice depends on the needs. Simpler cases involve the use of less expensive fixtures.

The above division contains additional subspecies. Rollers covered with natural or artificial fur are divided into ordinary ones for the floor and corners.

Ordinary fur coats are successfully used for walls with minor defects (irregularities). The subspecies for the floor is intended only for horizontal surfaces, because there is a strong runoff of paint.

Rollers for painting corners differ only in shape. This is done for ease of use. Foam rubber is used when working with adhesive compositions.

Choosing a roller for walls

For smooth surfaces, use rollers with polyamide pile

The choice depends on the used paints and varnishes, adhesive solutions. In order for the selected roller to serve for a long time, it is better to rely on the advice of specialists:

• foam roller of medium thickness - the best option for water-based paints, liquid adhesives, primers;
• fur with a short, medium pile - used on smooth walls;
• the basis of polyamide threads is perfect for smooth surfaces;
• for textured painting, rubber and foam bases are applicable;
• velor is used for all types of coloring compositions.

When choosing, the width of the tool is also taken into account. For an apartment, 30 cm of the sample is enough. Accessories should also be purchased: additional nozzles, an extension handle, a grater (removes drops).

Preparing walls for painting

Prepare the base before painting

To use the roller to paint the walls, you first need to prepare the room. It is required to remove curtains, furniture (or move, cover with a film, special covers).

If necessary, cover the floor with cardboard paper, doors and windows with plastic wrap (it is possible with a cloth, but there is a possibility of leakage), glue the baseboard with paper tape.

Wall preparation is reduced to a number of operations:

• after turning off the power supply, remove the covers from the switches, sockets;
• cover the remaining "insides" with masking tape;
• if necessary, dismantle heating radiators;
• cleaning and smoothing the surface: removing wallpaper (if any), hiding defects with putty, sanding dried walls.

Paint tray

The work involves the availability of basic and auxiliary means:

• screwdriver, knife, paint pan;
• set of rollers, grinding accessories.

After all the preparations, choosing a roller for the walls, you can get to work:

• the pallet is filled with a small amount of dye;
• the roller is dipped, rolled out to remove excess, evenly distribute the coloring matter over its surface;
• painting begins from the corner, then spreads in any convenient direction;
• to avoid the appearance of streaks, the tool is smoothly, without pressure, moved from top to bottom and back;
• corners are finished with a brush. About the varieties of rollers, see this video:

The remaining layers are applied only after the first has dried.

Roller care

Clean the instrument with water or solvent

Upon completion of all work, he needs to be cleaned of used dyes, varnishes, adhesives. Then it should be stored. In order for the tool to last a long time, it is necessary:

• wash water-based paints, wallpaper glue with clean water, dry without wringing;
• solvents are used to clean varnishes and acrylic paints immediately after work is done so that the surface to be treated does not dry out;
• storage should be in a dry place. For more information on caring for the instrument, see this video:

The widespread use of rollers is due to their practicality. Being on the floor, you can perform the processing of areas in a short time. The disadvantages of this method are the impossibility of normal painting of corners, joints and the absorption of a large amount of paint by some working coatings (they require pressing).