Installation of horizontal blinds. Mounting blinds on a plastic window. How to make dimensions

How to fix blinds on plastic windows, what should you pay attention to if you do the installation work yourself, what is the difference between roll and horizontal structures?

Those who decide to change the interior, replace traditional fabric curtains with their modern counterparts ask themselves similar questions.

Blinds are easy to use, do not interfere with the opening of windows, protect well from the sun and dust.

Blinds are:

Horizontal - slats (lamellas) are located horizontally, going up during opening;
Vertical - the slats are installed vertically, open to one side or the other, or move apart from the center;
Rolled - presented in the form of a single canvas, which is rolled up as needed;
Pleated - their feature is in the corrugated texture, treated for strength with a special composition. There are horizontal, vertical, can be assembled into an accordion.

All of these types can be:

wooden;
plastic;
aluminum;
tissue;
bamboo.

The choice depends on your preferences and financial capabilities.

Instructions for installing blinds with your own hands

The very first step is sizing. Curtains can be attached to the window opening, wall, ceiling. Having determined the place of their future location, it is necessary to make measurements correctly.

To fix the curtains in the opening, you need to make the following measurements. Determine the length - it will be equal to the height of the window pane with insulation (usually a rubber strip) plus 1 cm.

The width is defined as the width of the glass, but taking into account the sealing gum. Do not forget that the plastic window should open freely when the blinds are assembled.

If you are going to mount the curtains on the wall, then please note that they must completely cover the plastic window. The width will be 10 centimeters wider than the window.

The length, taking into account the eaves, increases by about 5 centimeters, its final size depends on whether the shutters cover the window sill or is slightly above it.

When blinds are attached directly to plastic windows, the length will be its height, and the width will be equal to the width of the window being closed.

We use the drilling method

You can fix the structure using drilling tools, or do without them.

Consider how to properly hang horizontal curtains with your own hands directly to the window sash using the drilling method.

Since the curtains are mounted on self-tapping screws, we mark the places for their installation by applying the upper bar of the blinds to the upper window profile. We make holes with a small drill, fasten the brackets.

We fix the blinds and fasten the fishing line that will hold the slats. On the lower part of the sash, again by drilling, we make two holes, placing them exactly under the upper outlets.

We fix the fishing line in the design of the blinds, fix the ends with plugs and thread them into the prepared holes, pull the fishing line.

The considered drilling method is usually used when it is necessary to hang rolled or horizontal structures.

To hang vertical curtains, this method is also used. Holes are drilled at the attachment points, and mounted with the help of connecting elements.

Mounting on brackets

The non-drilling method is used when the blinds will be regularly dismantled.

This method is safe and gentle on plastic windows, while installation without drilling is as reliable as the previous option.

Particular attention during installation should be paid to fixing the upper part of the curtains. To avoid distortions, be careful when marking.

Features of mounting roll, horizontal and other types

Each type has its own characteristics for installation. So, for example, roller blinds are best mounted directly on the window sash.

The structure of roller blinds with a different fastening will not allow the window to be opened when they are lowered.

Horizontal - these are universal designs, they can be hung between frames, attached to a wall, ceiling, etc.

Installation instructions for horizontal products cause the least difficulty during installation.

Therefore, if you are thinking about hanging blinds with your own hands, we recommend starting with this type.

Vertical - installation is done only by drilling, attached to the wall, ceiling, upper slope of the window.

It doesn’t matter if you plan to use roller, horizontal or vertical blinds, they all require careful maintenance. In order for the curtains to serve you as long as possible, do not forget to wash and clean them.

In conclusion, we suggest that you watch a video of the phased installation of the structure on plastic windows with your own hands.

Humanity has been trying to cover windows from prying eyes and sunlight since ancient times. Previously, curtains were used for this, but now blinds are becoming increasingly popular. The lamellas in them can be both horizontal and vertical.

Horizontal blinds are divided into different types: attic, roll, bamboo shutters, etc. Such devices have different mechanisms of functioning, dimensions.

They are attached to the frames, installation can be carried out on top of the window block or inside the frames. It all depends on the wishes of the owner of the apartment and the dimensions of the window opening. Most often, such structures are installed in offices, houses, apartments, factories, retail outlets, and stores. Their color palette is very rich.

The product can be attached to the profile of plastic windows in two ways:

Using self-tapping screws. This method involves drilling. Disadvantage: after dismantling, it is difficult to remove the remaining holes from the fasteners.
No drilling. In this case, the whole structure is less stable, but the appearance of the window does not deteriorate.

In order to install blinds on a plastic window, we need:

Screwdriver (screwdriver).
Lamels (for each sash).
Pencil.
A little time and patience.
Lower fasteners (2 pieces for each sash).
Upper fasteners (2 pieces for each sash).
Self-tapping screws (4 for each sash).

Work progress

Unpacking, we unwind the cord for adjustment.
We carry out the removal of the regulating bar.
We need to put a bracket on the top of the product.
We make a freeze. For marking, it is recommended to apply a spirit level so that the upper die is strictly horizontal and does not fall either to the side or down. If the window itself is installed with a skew, then the installation is done on the basis of this skew of the sashes.
We put a mark where the self-tapping screw will be screwed.
We check the correctness of the marks.
Once again we try on and remove the brackets.
We take the right bracket, apply it to the intended area and fasten it with a screwdriver.
Install the second bracket in the same way.
We put on the blinds and open them.
We put clamps on the sides of the canvas.
Check if the mechanism works.

For cleaning, unfasten the bottom slat and pull the blinds up. We wipe the window and put the slats in place. Dust is swept away with a whisk; after cleaning, an antistatic aerosol should be treated so that the structure collects less dust.

Fastening without screws

Typically, such fasteners are used in rented areas when it is impossible to spoil the appearance of windows.

We will need:

Scissors.
The adhesive tape is double-sided.
Blinds set.
Pencil.

Work progress

We unpack the package.
We remove the bar for adjustment so that it does not interfere.
Place the block upside down.
We measure the length of the adhesive tape equal to the length of the body.
Cut off excess tape.
We remove the protective strip and stick it on the wrong side of the block.
We try on the location of the blinds relative to the window sashes.
We mark the points where the ends of the blinds will be attached.
Remove the protective strip and glue the top.
We press the profile well to the surface.
We put the adjustment bar.
Checking the construction.

Important! The width of the tape should be approximately equal to the width of the block. We smooth the adhesive tape so that there are no blisters, it should evenly lie on the entire surface.

We fix horizontal blinds on wooden windows

We measure

We measure the dimensions, taking into account the size of the window. When installing in the opening, subtract from 1 to 2 centimeters. This is an adjustment for uneven slopes. After that, we determine where the controls will be located (left or right side). After that, you need to decide on the type of brackets that will be used (standard; twist model). We measure the length of the handle to control the structure, usually its standard size occupies 2/3 of the entire height of the product.

Important! The maximum width of the lamellas is about 22 centimeters. There are also large dimensions in stores, but with a width of, for example, 30 cm, no one will guarantee that the blinds will open and close well. The recommended maximum height of the structure should be no more than 2.5 meters.

How to attach horizontal blinds under a tree

This is a design with lamellas made of aluminum, which imitates natural wood due to polymer coloring. It is perfect for complementing a classic interior. In appearance, they look like wooden ones, but are less capricious and easy to operate.

We make outlines with a pencil in places where the brackets will be installed. There should be at least 60 centimeters between them.
Keep in mind that the brackets should not interfere with the assembly of the blinds, get into the latch or other moving parts of the mechanism.
We fix them to the sash, wall or ceiling (depending on the preferences of the owner).
Turn the latches counterclockwise until they click.
We put the upper part in the fasteners and wrap the latches until they stop by turning clockwise.
We check the work of the whole structure.

How to attach beech horizontal blinds

What you need for installation:

Crosshead screwdriver.
Level.
Marker.
Pliers.
Roulette.
A hammer.

We carry out measurements and markup

It should be noted that after installation, the product should not block the access to the window handle, do not interfere with closing and opening it. We outline the places for installing brackets. One of the top mounts should be next to the mechanism. Because when folding and unfolding, a large load is placed on this place and it is easy to break the mount.

We mark the necessary points with a marker. Self-tapping screws should not be taken more than 1 cm, otherwise there is a high probability of damage to the double-glazed window, which will lead to its depressurization. Because of this, constant condensate will begin, which will disable the window opening mechanism.

Mounting on tilted windows

We put twist-brackets on top of the window.
Plastic brackets are installed on the bottom.
We fasten the cables on the bushings.
We put the bushings in the holes of the upper eaves.
We install on brackets.
We pass the cable through the holes at the edges of the slats.
We put the second set of bushings in the holes of the lower brackets. We pass the cable through it, fix it with a screw from above.
Fix the window handle.
We check the operation of the entire mechanism.

Differences between horizontal and roller blinds

Rolled - this is a single canvas, wound into a roller. Such a canvas is usually fixed above the window, and the lower edge of the product is equipped with a special rail to make the structure heavier. This is an open product. They are recommended to be installed above the window.

The closed type design is a box with a roller closure and side dies that help fix the canvas to the window. Often they are equipped with electric drives, which operate from the control panel. Such a system makes such structures more comfortable to use.

While horizontal blinds are attached to the wall, to the ceiling, they can be installed between the frames (mainly used for wooden windows).

Conclusion

Horizontal blinds are a universal way to ennoble a window opening. Due to the variety of materials and colors, they are used when installing in apartments, private houses, offices, and retail outlets. Installation methods are easy to choose depending on the desire of the owner: outside, inside the opening, on the window frame, between the frames.

The most important advantage is that almost anyone who has a minimum set of tools (screwdriver, screwdriver, knife, hammer), a little patience and skill can install such a mechanism. Blinds do not block light sources completely, but help create diffused lighting.

After choosing a model, color and size, installation of vertical blinds, with proper skill, takes no more than 1 hour. All operations described in the instructions attached to the product are able to independently perform 1 person without special professional training and skills. When implementing this measure, it is important to take into account the features of the product and correctly assemble all structural details.

Training

Before installing blinds, you need to prepare a minimum of tools:

construction pencil;
level (the longer the better);
roulette;
perforator;
screwdriver (screwdriver).

Dowels Ø 6.8 mm are required if they are not included with the vertical blind brackets.

In order to imagine step by step how to hang, in what order the parts and tools are required, it is necessary to open the packaging of the blinds, lay out all the parts clearly, check the completeness with the passport, determine the need for additional materials (according to the chosen method of fastening).

Accommodation options

The advantage of vertical blinds is that they can be hung on openings of various shapes: oblique, arched, round, curved. The eaves along which the lamellas move may not be straight. However, the basic installation principles are the same:

If the curtain has a rectangular shape, before drilling holes, carefully check the coincidence of the marked points of the horizontal axis with a level.

Roller shutter suspension with electrical drive is mounted asymmetrically. The description shows the mounting dimensions on the motor side (right or left).

Installation subtleties

The practical process of how to assemble vertical blinds step by step consists of the following operations:

Thus, the assembled mechanism is checked for smooth running, uniform operation of all elements of the actuator. See this video for installation details of vertical blinds:

If there are comments, you should immediately contact the seller to maintain the warranty and possible replacement.

Installing blinds solves many window decor problems. Curtains, curtains, tulles, no matter what fabric they are made from, require frequent washing, as dust and dirt accumulate on them. The density of the curtains determines how well they let in or block light.

Blinds are much more convenient than curtains in many ways.

Depending on the angle at which the lamellas are located, they completely open the access of natural light to the room, partially block it, gently diffuse or completely isolate the room not only from light, but also from thermal radiation. They do not require special care, and installing blinds on your own is not difficult.

Varieties

Horizontal

A light-shielding design with a horizontal arrangement of slats that has become familiar, almost classic for window decoration.

Advantages:

Compactness. Are established directly on a window, leaving a window sill free. This saves space and allows you to place greenery on the window in favorable conditions for it;
Light weight design;
Strength and rigidity of the lamellas, preventing deformation;
fire safety;
Simple control mechanism;
Special coating or impregnation against dust, dirt, odors and grease;
Resistant to humidity and temperature extremes;
Different materials for the manufacture of lamellas: wood, plastic, aluminum, less often fabrics;
Easy installation;
Affordable price.

It is worth mentioning some of the disadvantages:

When mounted on a frame, the angle of inclination of the window sashes when opening is limited;
The slats emit a characteristic knock or ringing in the wind. To avoid this, it is necessary to purchase lower fasteners, which are not included in the kit and quickly become unusable;
The design is subject to repair in case of severe deformation of several slats, but it will cost like new blinds;
Not suitable for balconies and loggias with sliding windows.

vertical

Distinguishes them from horizontal ones:

More aesthetic appearance. Horizontal blinds are more functional while vertical ones are decorative;
The ability to cover a large area with one cornice. Horizontal blinds, as a rule, consist of narrow slats and are designed for minimalistic decoration of small windows. Vertical models have different widths and easily cover the area of large windows, arches and doorways.
Variety of materials. They can be made of wood fibers, wood, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, filament. The abundance of materials provides another advantage - the variability of colors and textures;
Modern and original window design, opening up more design possibilities;
Simplicity of control mechanisms. Both mechanical and electrical are possible;
The ability to place photo printing on the "curtains" due to the larger surface and better characteristics of the material;
Practicality. Larger lamellas are easier to clean if necessary, which does not occur often. If, in case of severe contamination, for example, in a children's room, the slats still need to be subjected to hygienic procedures, it will not take much time - they can be washed by hand and in a washing machine;
Possibility of installation on non-standard windows (triangle, trapezoid, arch, bay window);
The structure is in need of repair. To replace a particular part, you do not need to call the master, it is simple enough to do it yourself. You can replace the slats one at a time without having to dismantle the entire structure.

Vertical blinds, as the name implies, are a simple and convenient light-shielding structure, consisting of longitudinal vertical plates.

Rolled

Roller blinds, roller blinds are solid canvases, often made of textiles, but other materials are also possible, which, like horizontal blinds, roll up. The height can be adjusted by fixing the curtain with a weighting agent on the bottom bar of the canvas.

There are different types of roller shutters: with an open drum (for mounting directly on the window) and with a decorative cornice; "mini" for installation on each frame separately and "roll-cassette" for curtaining the entire window as a whole.

There is an opinion that roller blinds are the most budgetary and practical option for window decoration, but this is not entirely true. Of course roller shutters have their advantages: a variety of natural and synthetic fabrics, colors and patterns, ease of care (wet cleaning is allowed) and operation, the ability to fix the curtain at the desired height, special impregnations from dust, moisture, high temperatures and glare, compatibility with other types of curtains. It is convenient if necessary to hide the room from the sun, decorate the window with beautiful tulle so that it is not visible from the street what is happening inside.

But with so many advantages, they also have significant disadvantages.:

budget price- it's a delusion. Yes, by itself, a medium-sized curtain made of a common material will be inexpensive, but it will look boring. In order for the window design to be complete, it is necessary to think over additional decor, and this increases the cost at times;
Roller blinds in the bedroom, study and rooms with high windows need electrical control. Electric drive designs are expensive, and some manufacturers also produce noise;
Impossible make a custom-made curtain from a certain textile. You can choose only specific products of a specific brand, since the set of fabrics for the production of roller blinds is very limited: translucent, textured, reflective, perforated, blackout, and that’s all, perhaps;
Maximum Width roller blinds - 280-300 cm, that is, it will not work to cover a large area with one cornice, for example, a panoramic window or a balcony;
Can there will be problems with installation not on the wall, but in the window opening, since the bobbin is wider in width than the curtain itself. There will inevitably be gaps on the sides of the window openings. Ceiling or wall mount preferred.

Pleated

This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weights, pleated fabric, which resembles accordion furs.

The range of materials, colors and textures is very diverse.

Peculiarities:

They close from top to bottom, like classic canvases, from bottom to top or from both sides at the same time. At the same time, the degree of density of the "accordion" can be adjusted, thus closing either the upper, or lower, or central part of the window;
Suitable for curtaining irregularly shaped windows;
The optimal solution for dormers, attics, skylights and slanted windows;
“Opening”, the canvas is compactly folded and hidden inside the eaves;
Suitable for installation on all types of windows;
Various ways of fastening and control mechanisms (manual and electric);
The woven fabric is washable;
The curtain fabric can be made of two types of fabric at the same time, which makes it possible to adjust the degree of transparency, darkening, sun protection;
Easy installation can be done by hand.

Pleated types:

Classic. In appearance, they are most similar to horizontal blinds, but they can also be vertical. Made from fabric, paper or plastic. Designed for darkening the room, protection from heating by sunlight, zoning the interior space of the room.

Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look more even, neat and dense. Corrugated plastic and paper in this design absorbs a significant part of the heat and protects from bright light.

Inclined. A kind of pleated window, especially for windows that are located at an angle in the attic or ceiling. Their feature is in a specific assembly system, which does not allow the web of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

Arched. The most flexible canvases that take any shape, like a paper fan. A good solution for rooms with non-standard window shapes (arches, trapeziums, triangles, beveled windows).

"Day Night". The canvas of such blinds consists of two layers of fabric: a light fabric that transmits a large amount of light for daytime use and a dense, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Cassette

Such systems involve either the use of horizontal slats or a solid canvas, but are not horizontal blinds or roller blinds. They differ in the types of cassettes (angular, round, flat), control (various types of mechanical and remote), materials used (plastic, textiles, bamboo, aluminum).

Their main feature lies in the design, the special structure of which makes it possible to fix the blinds at a minimum distance from the window glass. This prevents deformation, sagging, the appearance of wrinkles and irregularities, and completely opens the window sill.

Advantages:

Compactness. Cassette blinds occupy a minimum of space, leaving the owners the opportunity to show imagination and organize additional window decor or leave the window sill as a functional surface;
Simple and clear type of control;
Long service life. Special impregnation protects the fabric from dust, grease, dirt, moisture, abrasion;
Ease of hygiene procedures. Cassette systems do not require special care. It is enough to wipe their small surface area with a damp sponge with soapy water every few months;
A variety of designs for the interior in any style;
The tight fit of the canvas to the glass surface protects equally well from heat and cold;
The ability to mount the system yourself;
A variety of materials - from light window decoration to total blackout protection;
The ability to combine blinds with curtains, tulle, lambrequin.

Mounting methods

There are three types of blinds fastening: to the wall, ceiling, directly on the frame, and two ways - with and without drilling.

The universal basis of any fastening is a cornice, which is attached to a wall, frame or ceiling in various ways.

with drilling

It is carried out with the help of self-tapping screws, brackets on which the cornice is installed, fishing line. Additionally, you will need a pencil, ruler, drill, screwdriver.

First you need to make a markup in those places where the brackets will be located.

For reliability and accuracy in the marked places, it is necessary to drill holes for the clamps. Then, applying the brackets in turn to the PVC frame, fix them to the markup with a screwdriver. Next, a cornice is installed and the whole structure is assembled as a whole.

without drilling

If in the future it is planned to replace blinds or other window decoration options, it is not recommended to damage plastic windows. Holes from self-tapping screws will remain in the frame forever and significantly spoil the appearance of windows. In this case, it is easier to turn to a method that does not require drilling.

Brackets in this case are attached in two ways:

for the upper part of the PVC profile on the opening doors (you can just hang it like a hook);
on double-sided tape, which can be glued without fear of leaving marks.

A special approach requires fastening the blinds on the balcony. The balcony structure plays an important role here. The choice of these or those blinds and the method of their fastening depends on the type of glazing. In general, almost all options are available for balconies. Particular attention should be paid to the type of blinds, since not all of them are universal for different types of windows. For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can be deformed during operation or from strong winds.

Measurements and markings

The final result depends on how correctly the measurements are taken.

Even expensive beautiful models will not look good on the window if there are gaps in the opening or the edges of the lamellas constantly lift up against the wall.

It is important to pay attention to the following points:

For the most accurate indicators, a steel tape measure is used;
It is impossible to round the received figures, the accuracy must be observed to millimeters;
When ordering blinds, the width parameter is indicated first, the length - the second;
Not a single window opening has absolutely ideal geometric shapes, therefore, measurements up and down must be made at least at two points.

Horizontal

If you plan to mount blinds on the movable half of the window, you will need to measure the gap between the glazing beads and add from 30 mm, which will prevent gaps in the structure. The height of the blinds is equal to the height of the window sash.

To install a window inside the opening, measurements are required at three points in height and width, since the openings are not always absolutely proportional.

The width is identical to the wide side of the glass plus the thickness of the rubber seal. The length is identical to the height of the window (including elastic bands) and a margin of 1cm. To install the eaves, you will need an additional 30-40 cm to the slopes and loops. The chain of command is 2/3 of the height of the window.

When choosing to fix the cornice to the wall, the width parameter increases by 10 cm, the height is measured from the point of attachment of the brackets to the floor arbitrarily.

vertical

When installing in the armhole of the window, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value.

For wall mounting, at least 10 cm must be added to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor.

Ceiling installation involves determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Rolled

For mounting the canvases to the wall, only one measurement is required - from the edge of the window sill to the markings for the brackets, and the width can be up to 300 cm.

In the window arch, roller blinds are mounted after measuring the width, from which 4 centimeters must be subtracted, and the length of the canvas is equal to the height of the window minus 15 mm.

Pleated blinds similarly do not require a professional approach in taking measurements and installation.

Installation of vertical models

Vertical blinds are the most convenient way to decorate a window for self-fulfillment. They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with or without a decorative facade.

The brackets on which the structure rests are fastened with self-tapping screws, hung or glued on double-sided tape. Special adhesive tape, despite the seeming impracticality, is fixed very firmly, so it is important to correctly mark the brackets for installation. Once they are glued, moving them will be very problematic.

How to install vertical blinds:

Preparing tools. You will need a stepladder, a set of self-tapping screws from the kit, a building level and drawing accessories, a drill, a screwdriver.
Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
Mounting brackets in a suitable way (with or without drilling).
Cornice installation.
Lamella installation. To do this, you need to pull the control cord, on which the fasteners for the slats are located, so that they stand in the desired position. Then fix all the slats on the fastening hooks.

Installation of horizontal

For installation, you will need a set of tools: a drill, a cross-section screwdriver, a screwdriver, drawing accessories.

The instruction for installing horizontal blinds on windows contains a list of items, which is performed step by step:

Draw a marking line for the installation of brackets. It should take into account the distance between the latches and the control mechanism, between the brackets (from 60 cm) and to the extreme sections on the blinds bar (25 cm). With a large width of the blinds and significant weight, it is recommended to use intermediate fasteners.
Drill on the surface to which it is planned to mount the brackets holes for installing dowels. On plastic windows it is possible to apply blinds without drilling.
Profile mounting.
Fixing the upper rod of the blinds on the brackets. It is important to remember that the blinds at this stage are already assembled.

Working with horizontal models on sloping surfaces requires a little more effort and skill.

How to hang roller blinds?

Like other types, roller blinds or roller blinds are attached in several ways: they can be hung, glued, mounted on a frame.

First way- the easiest and most affordable for do-it-yourself installation is a fastening without drilling based on double-sided adhesive tape. Suitable for tilt-and-turn mechanisms on windows. It is carried out step by step:

Degreasing the frame sections and fasteners that will be connected with adhesive tape.
Roller shutter fixing.
Roller blind installation. The chain mechanism can be installed from any convenient side.
Bracket assembly.
Bracket mounting markings. To do this, you need to install them on the assembled roller blind, install it on the window without fastening, mark the places for the adhesive tape with a pencil, remove the curtain.
Application of adhesive tape on the back surface of the brackets, installation on the window.
Setting the guide wire against sagging. It is attached to the “ear” of the upper bracket and curtain weighting agent, and is fixed at the bottom in the tensioner, which is installed on the frame.

The second method involves fastening to a stationary frame (not opening):

Primarily you need to mount the roller blind, assemble the brackets and install them on the reel. Then this design must be fixed on the window in order to mark up for fastening.
Second step– fixing the brackets to the adhesive tape in the upper part of the frame and the string tensioner in the lower part. It is not necessary to pre-attach them with tape, but it is desirable to eliminate problems with subsequent drilling of holes for the screws. After installing the guide string, the curtain itself is mounted in the mechanisms.

How to fix cassette?

Cassette blinds can also be installed independently. Before installation, you must read the instructions, make sure that the complete set is complete, prepare all the necessary tools: a screwdriver, drawing tools, a screwdriver, a drill, cotton pads or a small piece of cloth, a degreaser.

When everything you need is collected, you can proceed to the first stage - degreasing the glazing beads. Then you need to remove the side covers of the box, raise it to the top of the frame, focusing on the guides, drill holes for the fasteners, fix with screws. You can use a screwdriver for this purpose, or you can perform the process manually with a Phillips screwdriver.

When the box is installed, you need to fix the covers on the sides. After that, you can glue the guide rails to the degreased frame. The guides should be below the corner of the glazing bead by a few centimeters.

Important nuances

Installation work on window decoration requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features in this work.

Installation of blinds begins long before the preparation of the work surface and a set of tools.

The first step of this process- a balanced decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room. So, it is more expedient to choose vertical blinds for the living room that let in light, for the bedroom automatic roller blinds with electric blackout fabric, and for the kitchen, where the smells of cooking and combustion products of food are constantly hovering - plastic blinds that do not absorb grease and dirt.

The second important point is the correct markup. Much depends on it, including how easy the installation process will be. If all the features of the architecture of window openings are taken into account by specialists when ordering blinds from them, everything will go smoothly and easily without the help of professional installers.

It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of their deformation.

The installation of blinds must be carried out exactly with the markup and subsequent verification of the functionality of the structure. Here the most important point is the choice between fastening - with or without drilling.

It is also necessary to provide for the type of control. For low windows, one of the varieties of mechanical direction is an excellent solution. Roof windows, slanted windows, windows in the bedroom are suitable for magnetic, automatic (electric) control with an electric drive.

Blinds, which even 10 years ago looked like a real foreign exotic, today have firmly entered our lives. Most office spaces and institutions have moved from using standard curtains to universal blinds, which are less dusty, look stricter and are incredibly comfortable.

Blinds are used even in rooms made in a classic style, because their functionality, ease of maintenance and appearance are on top. In addition, blinds provide effective protection of spaces from sunlight, allow you to easily adjust the level of illumination in the room, and reliably shield the room from prying eyes.

The installation of blinds must be carried out in accordance with all the rules, otherwise you risk getting a lot of problems: the curtains will not move, it will be difficult to assemble the curtain, etc. High-quality installation ensures the longevity of the blinds. When installing, you need to take into account the design features, the specifics of the walls (or window frames) in the room.

PVC window companies offer blinds in a wide variety of shapes and sizes. Depending on destination, blinds are made from:

By type of blinds are:

These types differ significantly in the location of the lamellas and installation methods.

Vertical blinds are a rarity in ordinary residential areas, they are more often used in offices. They are mounted above the top edge of the window, similar to curtains, although this may adversely affect their functionality. And roller blinds and horizontal blinds are more often used at home instead of traditional curtains. Their installation is carried out not only in the window opening, but also on top of the window.

Roller blinds are mounted on the front surface of the corner of the upper slope of the window profile.

Blinds with horizontal slats can be mounted directly on the window profile, on each sash. Often, horizontal slats are complemented by curtains with curtains. Installing blinds directly on the window profile saves usable space in the room itself and frees up space on the windowsill.

Blinds are made up of:

For windows of a non-standard shape, it is necessary to use lamellas of a special length, which will best ensure the light protection of the room.

If your window has two sashes, then when installing the blinds, pay attention to the location of the blinds lifting mechanism (right, left).

Three ways to install blinds:

overlay;
for each window sash separately;
directly into the window opening.

A factory set of blinds usually includes all the materials for their installation: screws and self-tapping screws, as well as other details.

The choice of installation option is associated with the design features of the window: it is a little easier to install blinds on standard double-leaf windows than on inclined roof windows. One of the most difficult is the installation of blinds on PVC windows, since working with plastic, compared to, say, with wood, has a number of specific features. The installation of the cornice on plastic windows should be carried out as carefully as possible and it is better to do this in the warm season (at temperatures above +5 degrees Celsius).

The installation of the blinds on the window sash can be carried out using self-tapping screws, brackets or by drilling holes in the frame. It is the most durable and reliable.

Important! The tightness of the profile when attaching the cornice of the blinds to it with the help of drilling does not suffer. If it becomes necessary to remove the cornice, and holes remain in the frame, they can be filled with white silicone sealant.

If you do not want to drill holes, use brackets that are attached to the frame without drilling.

Important! In most cases, blinds can be fixed with screws that are already in the window profile. This installation method is no less reliable than drilling holes. You can learn about the possibility of such a simple installation from the blinds instructions.

Blinds installation progress

After unpacking the blinds, read the instructions. Installing blinds means: measuring the window and adjusting the dimensions of the blinds to it; then install the fasteners for the cornice and the cord system; collect the strips on the eaves and check the performance of the system.

Measurements are necessary in order to subsequently make it convenient to use the light-protective sheet, without complaining about distortions or frequent breakdowns. It is especially important to verify the dimensions of the paintings and adjust them to the place of attachment if the window opening has a specific geometric shape.

Before screwing, you need to mark the position of the fasteners with a pencil, checking them with a level and a tape measure, in order to avoid skewed fit and leave room for adjusting the container, and also so that the strips do not extend beyond the window glass.

2. Installing the cornice and slats

Before installation and direct installation, it is necessary to mark the fasteners with maximum accuracy and symmetry. For the regulating cord, additional fastening must be provided so that the structure can withstand the additional load. All elements are fixed to the wall with screws or dowels. Next is the installation of the eaves. The lamellas and runners themselves will be attached to it. The rigidity of the structure is guaranteed by the upper eaves bar, so there is no need to additionally strengthen the bar with glue, sealant or foam - it is fixed quite rigidly.

When reinstalling, you need to measure the width of each window sash so that the window fittings do not interfere with the free hanging of the slats. Also, when choosing the installation “in the window opening”, you need to reduce the height of 2 cm on each side so that the canvas does not touch the window sill. To fix the blinds close to the plastic window, you need to drill the plastic frame of the window according to the markup - pre-drilling will prevent cracking of the plastic.

If the plates on which the blinds are hung do not fit snugly against the window profile, use linings.

Brackets for blinds are screwed into the holes with self-tapping screws. Next, the brackets need to be fixed upward with latches and insert a container with blinds into them.

The lower holders are attached as follows: lower the curtain to mark the lower points (the canvas should be loosely stretched). According to these marks, drill holes into which you need to screw the lower holders that fix the canvas in the “micro-ventilation” position. Make sure the staples are firmly seated in the plastic.

When installing overlay, add 5 cm in width so that the entire opening is closed. The height is adjustable arbitrarily and can reach the window sill or the floor itself.

There are a number of modern ways to install blinds, involving the installation of a cornice with lamellas on brackets attached to the window frame without drilling. The striped cornice is simply hung on the brackets and snapped into place. The design is collapsible, which allows you to remove the blinds when you need to wash the window glass or wipe the slats. This is the easiest way to install blinds.

Features of mounting blinds by type

Vertical blinds

Before installing vertical blinds, you need to decide whether a wall or ceiling mount for the cornice will be more convenient. The height of the light-protective fabric depends on the place where the cornice is attached.

The thickness of the guide for vertical blinds should be at least 5-6 cm, such a gap will ensure free movement of the slats. If there is an obstacle between the blinds and the wall (batteries, etc.), then you will need to install an additional bracket, which is not included in the kit, you need to buy it separately.

If you want the blinds to be at some distance from the wall (cases are different: a pipe, etc.), you must additionally purchase a bracket

For vertical blinds, the order in which the slats are hung is also important: they must be attached to the cornice in the same order that was in the factory box. Also, before starting the installation, it is necessary to determine the correct direction of the suspensions. The correct position is when, when closed, you cannot see the seam on the blind material.

Don't forget to place the bottom weights on the vertical strips to keep the canvas looking flat. Loads from the outer and inner sides are interconnected by a chain. The plumb line is attached to the cord, which is included in the kit. Different manufacturers use plumb lines of different shapes.

There are a wide variety of vertical blind mounts available in stores, but they are very often unreliable. It will be most reliable to mount the blinds using a pair of brackets that need to be screwed to the wall with self-tapping screws.

Roller and horizontal blinds

Horizontal and roller blinds, as well as vertical ones, are equally conveniently installed on a wall, attached to a window or ceiling. The main thing is to clearly measure whether the canvases will interfere with opening the window. If this happens, in the strips, if possible, you need to cut a hole in advance for comfortable opening of the window sashes.

When fixing on double-sided tape, do not forget to dedust and degrease the surface with high quality.

You yourself have seen that self-installation of blinds is quite simple, if you know a few tricks that make this process easier. Good luck with your DIY blinds!