Construction of pavilions from sandwich panels. How to open a stall yourself? How to make a do-it-yourself kiosk drawings

Frame structures can be combined with reinforced concrete. Minimarket

Sandwich panels are a material used for cladding the frame of a prefabricated building, as well as for insulating or reconstructing a traditional one. Ready-made slabs are more often used, however, products are also produced that are assembled on site during the installation process. As a rule, this is associated with large volumes or complex architectural elements.

Both technologies are widely used together, allowing the construction of industrial and residential buildings at an extraordinary speed. Prefabricated pavilions made of sandwich panels are the most popular option for building a retail outlet, however, the material allows you to build a large hypermarket also quickly and economically. Pictured is the shop building.

How to make a stall

Construction of pavilions from sandwich panels

With a kiosk width of more than 3 meters, a channel is used. At the base for every meter there is an additional crossbar for greater rigidity. Frame racks (pillars). The corners are the most commonly used.

The main ones are placed in the corners - 4 pieces. The connection of all metal structures is made by welding. The frame is of two types, depending on what the walls will be made of. The first type: a wall made of prefabricated sandwich panels - frameless.
The second type: prefabricated sandwich panel - frame (layer-by-layer manufacturing).

Loading page Similar videos Block-Module IP Ryzhykh A AM Metal frame container block Manufacturing of trade pavilions by the company Servisprom Production of a block container Production of trade pavilions. do-it-yourself shop Prefabricated buildings, pavilions, shops, trade modules Day 1.

domavideo.ru

Unfortunately, kiosks are often the victims of hooliganism, and therefore their fire safety must be maintained at a high level.

Lining - steel is recommended - galvanized, polymer-coated, or aluminum. Metal provides the products, and, therefore, the trade pavilion with greater strength and durability. And the coating plays the role of protecting the metal from corrosion and gives the building a pleasant appearance.

Metal sandwich panels are produced with a smooth, profiled, corrugated surface and are painted in a wide variety of colors.
The photo shows a prefabricated pavilion made of SIP panels. Construction of a trade kiosk Due to the lightness of the material - from 30 to 80 kg, and the ease of installation, the work on the implementation of the project can be carried out by hand.

Construction of a kiosk

All detailed information here: … Added 2 years ago. Channel: building a stall from scratch to interior decoration. Added 3 years ago. Channel: Based on the analysis of competitors' signs and their own experience, f-design developed an advertising concept ...

Added 4 months back. Channel: All work took 3 months. From frame assembly to finishing. Added 2 years ago. Channel: We also manufacture: change houses, construction trailers, containers, warehouses, toolboxes, pavilions, ...

Added 3 years ago.

How to build a stall yourself video instruction

All this is closed by the interior decoration of the walls. When installing walls by layer-by-layer assembly, additional racks from a profile pipe are installed in the place of the doorway to stiffen the doorway. When installing walls using sandwich panels, the frame is the corners with the installation of window openings in the places where the window openings are installed - frames from the corners. A closed frame is made of the corners for the entire window. Also done on the door.

The upper belt of the frame (base for the roof) It is made from a corner or a channel, depending on the size of the kiosk (pavilion). Beam - a jumper of the upper belt. Placed on every meter. Most often it is made from a profile pipe.
Author How Easy! Starting a business, everyone wants to save money, and this is quite reasonable. One of the ways to save money when opening a stall is a self-constructed room. To make a stall yourself, you need to know some points.

How to build a trading pavilion with your own hands?

I work as an accountant, well versed in corporate and personal finance. It would be strange to be able to get out and look for opportunities to save money for the enterprise, and not find the same opportunities for yourself and your family.

Page navigation

Types of trading places:

Their acquisition and installation are quite cheap, so a businessman who just embarks on the chosen path will be able to start acting by investing a minimum amount in business, but at the same time enjoying great freedom, because the number of pavilions is not so difficult to increase if necessary, but you can also move them, following for the level of sales in specific points of the city.

Businessmen who choose this option can quickly and effectively increase and increase their income, which cannot be said about entrepreneurs who decide to create a trading pavilion with their own hands, because the maintenance and operation of a rented outlet is not so expensive and does not threaten you with the failure of your ideas.

You can make a custom-made trade pavilion, after carefully coordinating its parameters and dimensions with a construction company.

Video: DIY shop

How to build a trade pavilion

In this article, we will only touch on the construction part of the process, leaving the permissive-documentary part behind the scenes. Trade pavilion - in our case, it is a small architectural form (SAF) up to 30 square meters. We will consider step-by-step construction instructions. The foundation is better to make tape - reinforced concrete. Since it will not be designed for a large load, a trench is dug under the foundation with a depth of 2 bayonets of a shovel, a depth - along the width of the shovel. To save money and time, you need to pour the foundation immediately at the desired height. Therefore, over the excavated trench, you need to make a formwork of the desired height. Inside the foundation, you need to make a dressing of reinforcement. For such a foundation, it is enough to make 2 racks of 8 mm reinforcement every one and a half meters. And through them put the same reinforcement - two from below, two from above. On the racks, make crossbars from below and from above, like the letter “T”, tie them to them! knitting wire longitudinal reinforcement. Pouring concrete beam from the mixer.

In this case, it may seem that hiring a mixer and buying ready-made concrete is expensive. But keep in mind that the whole process takes about 2 hours, and the mixer is ordered for an hour. And making concrete with a concrete mixer will require hiring workers for several days, buying and transporting sand, cement, and water. In total, everything will take more time, money and nerves. Immediately after pouring into the foundation, you need to stick a few reinforcements around the perimeter to link the pavilion frame to them in the future. After the foundation has hardened, you need to level the area inside it, then cover it with sand by 5-10 centimeters and compact it tightly. Then cover the area with expanded clay. To reduce the cost, expanded clay can be replaced with floor foam, although there are cases of flooring as a heater for ordinary wall foam, which is cheap and, as practice has shown, reliable. After laying out the floor 5 cm of foam. A welded mesh with a diameter of 10 cm is laid on it. The sheets of the mesh are tied together with a knitting wire. 10 cm of concrete is poured from above at a level with the foundation. After installing the pavilion frame, all that remains is to lay the tiles - and the floor is ready.

The total thickness of the insulation must be at least 12 centimeters. The inner side of the wall can be made of plasterboard, which has a more beautiful look, or, for example, plastic lining. Profiles for drywall are screwed to the iron profile, suspensions go from them, and through the distance necessary for the insulation, again the profile, to which the drywall directly clings. If you want to build a very high-quality trade pavilion, then it is better to contact the appropriate construction company. Here the construction of trade pavilions.

This is easy to do and the roof is cheap and practical. Windows used for this type of construction are metal-plastic with three glasses, which improves their frost resistance. The entrance door, depending on the location of the pavilion, can be either iron or metal-plastic, closed with roller shutters. And of course, it’s good to make a visor from cellular polycarbonate.

What can be built from sandwich panels

We can build an industrial or ordinary garage from sandwich panels, a boathouse, a bathhouse, a sauna, a guest house or a country house. But this is not all of the possible applications of this wonderful building material.

When it comes to the construction of private houses, preference is given to more common technologies that have been used for more than a dozen years. This is due to the fact that most people are very conservative in matters relating to construction.

“We build once in a lifetime, and there is no place for experiments” - this is how 9 out of 10 people will answer the proposal to build a house according to a modern economical, energy efficient, etc. technology. Even building a garage from sandwich panels is far from being solved, let alone houses.

It is profitable to build commercial real estate from sandwich panels

Commercial construction is more flexible in this respect. Everything is simple here, investments in a facility under construction should pay off as quickly as possible. The issue of durability is also important, but within reasonable limits.

Modern precision equipment cannot always be placed in cold, dusty workshops built 50 years ago. It is obvious that the workshops erected today will also become obsolete in technical terms in a few decades.

Beautiful and modern industrial and commercial buildings are built from sandwich panels

Of course, I will not argue that it is more profitable to build everything from sandwich panels. For example, cold warehouses or production lines that are undemanding to environmental conditions are more profitable to place in simpler frame buildings, for example, from a profiled sheet.

Expensive equipment usually requires a clean room with favorable temperature, humidity, etc. And the most reasonable thing is to build something similar from sandwich panels, they say in their favor:

low cost;
low operating costs;
excellent energy efficiency (due to thermal insulation of sandwich panels);
ease of repair;

Building a room from sandwich panels is a good option for a private business

Do not think that commercial construction with sandwich panels is exclusively large-scale buildings.

It is possible to build a bright and beautiful shopping pavilion from sandwich panels at a very reasonable price.

The cheapest options, for example, from LSTK, are not an option. Heating costs will exceed all reasonable amounts. Yes, and the appearance - to put it mildly, not very.

Sandwich panel pavilions

Wang need to build a pavilion in Moscow or the Moscow region? We invite you to get acquainted with the ideal solution to this problem - pay attention to pavilions made of sandwich panels.

Why sandwich panel pavilions deserve your attention?

It so happened that the rent of retail space is very expensive, and the construction of a capital building allocated for trade is even more expensive. This is not affordable not only for novice entrepreneurs, but also for those who started doing business a long time ago. Therefore, Russian businessmen appreciated the new technology for building pavilions from sandwich panels.

It is clear that the construction of a prefabricated store of the required area using the technology of quickly assembled buildings is much more profitable than buying or renting a retail space. In addition, after coordinating the installation of the pavilion with the local administration, you can install it in any place convenient for you. Thus, you will get a point of sale, and you will be able to develop your business without excessive costs.

What are the advantages of panel pavilions?

Many entrepreneurs have already appreciated the advantages of commercial premises made of sandwich panels, and here are some of them:

Trade pavilions made of sandwich panels are inexpensive. Sometimes, the developer manages to save up to fifty percent of the cost of a traditional structure by opting for a prefabricated building.
The construction speed is really high. Since the panels are as ready to install as possible, the use of welding is minimal and there are no wet processes in the construction, the erection of the structure will take only a few days. Stop losing customers!
A permit for the construction of pavilions of this type is issued as simply as possible. After all, a prefabricated building is not an object of capital construction; it can be easily dismantled if necessary. Therefore, construction is possible even on the site for which a short-term lease agreement is drawn up.
Trade pavilions made of sandwich panels look beautiful and presentable. The coating of the sandwich is very reliable, so the store will retain its original appearance for many years.
Mounting and dismantling the pavilion is very simple, and it can be done at any time of the year.
If necessary, the useful area of the trading floor can be easily expanded without resorting to major redevelopment. It is also possible to increase the height of the building.
Inside the store will be warm in winter and cool in summer.

How much can it cost to build a trade pavilion from sandwich panels?

If we talk about the cost of building from sandwich panels, then it can be different. In fact, the cost of building a pavilion is a combination of costs for materials used in production and installation work. For example, the price of a trading floor frame directly depends on the metal consumption and how complex the project is.

Our company "Bystro" does everything possible to make our prices lower than competitive ones without losing the quality characteristics of the building.

Order trade pavilions from sandwich panels in our company

The Change Houses Bystro company is engaged in the production of commercial pavilions from sandwich panels at a professional level. The main credo of our organization is to create the most comfortable, reliable and durable retail space, in accordance with the wishes of the customer and the type of his activity.

How to legally rent land for a pavilion or kiosk from the city administration?

There is a common opinion: in order to open a pavilion or a trading kiosk on municipal or state land, no land lease is required. This is not true.

Laws of Russia on the lease of municipal land for a kiosk or pavilion - we study legal issues

A piece of municipal or state land may be leased by the appropriate authority.

A tenant can be both an individual and a legal entity.

The main legislative act regulating the legal relationship between the tenant and the lessor of municipal land is the Land Code of the Russian Federation.

How to build a do-it-yourself trading pavilion: organization tips + drawings

For many entrepreneurs, it is extremely important to build a trade pavilion as soon as possible. But it is necessary that such a structure has strength and reliability. You can assemble a trading pavilion with your own hands, but you will need to take into account a number of certain factors.

Site selection for the pavilion

Many novice businessmen do not know how to put up a pavilion in the city. To organize a trade pavilion, you will first need to choose a suitable place. This stage is extremely important, as a kiosk located in a good place will bring more profit. It is better to give preference to places near residential buildings and major roads.

It is also desirable that there are no supermarkets nearby, most of the buyers will go there. But if fresh fruits or vegetables are sold in the store being built, there is no need to be afraid of competition from large buildings.

For a small kiosk selling food, a plot in the courtyard of a residential building away from shops would be an excellent solution. The people living there will be grateful and all the costs of building a kiosk will pay off in the shortest possible time.

Lease of land for a trade pavilion

How to rent land for a pavilion? This is a rather difficult and painstaking business, you will need to be patient. Often the land on which the opening of the pavilion is planned is owned by the state or municipality. So it can only be rented. To do this, you will need to make a request to the city department of consumer services and trade or to the district committee of state possessions.

Lease of land for a trading pavilion is possible only if a businessman is registered as an individual entrepreneur or acts on behalf of an LLC. Therefore, to begin with, you will need to purchase one of these statuses. After that, the procedure will be as follows:

Selected land for the pavilion. You can choose a site based on personal preferences. But if many shops have already been built on it, the administration has the right to refuse.
Then you need to collect documents and submit them to the administration. Of the documents you will need: an application for the lease of a plot, a certificate of no tax debts, drawings of a future building, certified copies of OKVED codes. The time for studying the application from the moment of its submission is 30 days.
Also, the lease of land for a pavilion requires permission from the following organizations: sanitary and epidemiological stations, fire departments, environmental enterprises, traffic police, and a water utility.
If a positive decision was made on the request and all permits were obtained, you can proceed to the construction of the building. In this case, it will be necessary to carry out cadastral work on this site.

Interesting Facts! The process of renting a land plot for a trade pavilion can be greatly simplified. To do this, you will need to purchase a plot in any market, then all the documentation will be collected by its owners, and the businessman will act as an ordinary buyer. You can also rent a plot from a private entrepreneur, and not from the state, this will greatly simplify and speed up the opening of a trade pavilion.

Refusal to rent

If the rental request is denied, you will need to clarify what is the reason for the refusal. The most common reasons for this are:

There is too much density of objects for trade on the selected area.
The land is used by the state for urban needs.
The plot is no longer part of the turnover.

If such a situation arises, you can go to court or change plans for choosing a land plot. The second solution will allow you to arrange a trade pavilion as soon as possible.

Types of shopping kiosks

To open the pavilion, you will need to first familiarize yourself with its views, study the nuances of their construction. Trading kiosks can be classified according to their scope. There are such options:

Pharmacy kiosk.
Newspaper.
Coffee house.
Vegetable.
Grocery store.
Flower stall.
Souvenir shop.
Bread kiosk.

Also, such structures can vary in shape and size. These characteristics are selected based on the purpose of the store. If there is a small amount of goods in it, it is not necessary to build a large building. For example, vegetable and flower stalls may be small.

There are several technologies for the construction of such buildings. They differ in financial costs and time required for construction work. These include:

LSTK technology. A method of building a kiosk that uses a metal frame made of wood as a base. During the construction, thin-walled, lightweight profiles are used, which will help to assemble the pavilion with your own hands in the shortest possible time. These profiles can be solid or perforated. The frame can be combined with reinforced concrete-based materials.
Sheet assembly. Such structures are installed in several stages. After the metal frame and enclosing structures are installed, it remains to mount the external and internal profiled sheets. After that, using self-tapping screws, the insulation is installed, and facing work is carried out. Installation using this technology is a little more complicated than the previous version, but it allows you to provide a higher level of reliability.
Use of sandwich panels Such material is purchased for the purpose of finishing the frame of the building and for its insulation. Usually ready-made slabs are used, but prefabricated structures are also sometimes used.

The considered technologies are quite often combined. Sandwich panels allow you to build a building in the shortest possible time, they can also be used to build a large store.

Interesting Facts! For successful trade, the speed of trade and the ability to open or move the pavilion as quickly as possible are of great importance. Store mobility is extremely important, especially when it comes to seasonal trading. Therefore, when building a kiosk, it is recommended to give preference to lightweight materials, but with good strength.

Pavilion construction process

In order to build a pavilion with your own hands as quickly as possible, it is recommended to use sandwich panels. Their installation is quite simple, so that the work can be done without the help of specialists. Quite often, such buildings do not even require a foundation.

Interesting Facts! When building a pavilion, it is recommended to pay attention to the filler of the panels used. It is best to choose the category of materials protected from fire, this will be indicated by a special designation on the packaging. The fact is that kiosks often become victims of hooligans, so their fire safety must be at the proper level.

How to make a pavilion with your own hands? The lightness of the material, the weight of which can vary from 30 to 80 kg, and the ease of installation allows you to do all the work yourself. For small buildings, a foundation is not required; a flat concrete surface will suffice. The help of construction equipment is also not needed. The procedure for the construction of the pavilion is as follows:

To build a trading pavilion with your own hands, you will need to use drawings. The kiosk project can be ordered from a construction company, found on the Internet, or calculated by hand if you have the necessary skills. Often calculations are made based on the characteristics of the panels used, but since this material is difficult to adjust, it is better to give preference to standard plates. You can also use the following drawings.

The foundation is being built. If the construction will be carried out on a flat concrete surface, it can be abandoned. Since the sandwich panel kiosk is light in weight, a lightweight shallow-depth tape base or tape-column base will be sufficient. The construction of the base consists of pulling out the foundation pit, mounting the formwork based on the boards and filling it with concrete mortar. For a strip-column foundation, you will also need to install piles.
A metal frame is being erected. The first step is to assemble the wall and roof separately. The width of the profile is selected based on the calculation of the pressure on the building. You will also need to take into account that the frame structure has a large windage, because of this, the load increases. Then the walls and roof are connected.
The wall installation process starts from the corners. When connecting the panels, heat-insulating materials are laid between them, the formed seams are filled with foam. Plates are fastened with self-tapping screws. For security and maintaining the integrity of window openings, you can use roller shutters.
Roof sheathing is performed in a similar way, but roofing sandwich panels are used to work with it. For sun protection functions in such structures are used: awnings, solar blinds, sun lamellas.

After all construction procedures are completed, the pavilion can be filled with goods, brought in all the necessary equipment and gradually proceed to its opening.

dtpstory.ru

The interior is finished with chipboard, fiberboard, OSB, MDF, chipboard or plastic. 5. For flooring use corrugated aluminum sheet or linoleum. 6. For the roof of the kiosk, it is better to use a metal version of the coating and lay a foam or polystyrene foam insulation to avoid drafts. 7. Showcases are often made of double-glazed windows, which can then be closed with metal shutters, protecting the kiosk from unexpected guests. 8. When the work with the kiosk is completed, they begin to conduct electricity, install sockets, switches and internal equipment. 3.3 Installing the finished kiosk It is recommended to install the finished kiosk at a certain distance from the ground in order to avoid freezing and moisture penetration. To do this, initially, concrete blocks are laid at the installation site or a foundation is formed.

How to build a trade pavilion

Kiosks from profile pipes

How to build a trading pavilion with your own hands

What is the best way to build a kiosk

Reply to a message from user krsmir I think that for the information I asked for, it was given behind my back. I will write again: The building is a pavilion, a temporary structure, not a capital one. Easily built. Location - Leninsky district, I named the dimensions, wrote I was interested in the cost without communications and decoration. By the words "turnkey" I meant only walls, a roof, etc. Electricity, water supply are my problems. There is money, otherwise I see no reason to ask questions. I don’t want to announce the budget, so that they don’t adjust the estimates to this budget. If, as you write, you have already built these pavilions, then I am surprised that you cannot estimate the cost approximately.

Ngs.business - online business magazine

As a result, the kiosk perfectly tolerates mechanical loads;

It can be repeatedly transported to a new location;

It will serve you reliably for many years.

Features of the kiosk frame The kiosk frame has a reinforced lower belt (base). For a small kiosk, up to 3 m wide, use the corners.

For a kiosk of larger sizes - a channel. To give the base greater rigidity, there is an additional crossbar for every meter. Racks-pillars are used in the frame structure. All elements are connected by welding.
The upper belt of the frame serves as the basis for the roof. For each meter, a beam-lintel of the upper belt is placed. A galvanized profile sheet is laid on the floor.

The frame of the trade pavilion from a wooden bar

profile pipe 60x40
profile pipe 50x25
profile pipe 40x20

To install additional stiffeners of the supporting frame of the pavilion, a profile pipe with a section of 50x25 mm is well suited. The wide edges of pipes of this size will make it easy to attach the skin to them.
For convenient joining of pipes to each other, it is recommended to select additional frame parts from products of a smaller section than the professional pipe for assembling the frame, in this case a 40x20 mm profile pipe is suitable. In addition to professional pipes, you will need other finishing materials.

*See section 3.2 - "Installation of the kiosk".

Most kiosks are frame metal structures, consisting of shaped pipes, angles, channel bars. The frame is a kind of skeleton of a kiosk. It must be rigid to withstand the load during construction, transportation.

The lower belt of the frame (base). With a kiosk width of 3 meters or less, corners are used. With a kiosk width of more than 3 meters, a channel is used.

At the base for every meter there is an additional crossbar for greater rigidity. Frame racks (pillars). The corners are the most commonly used. The main ones are placed in the corners - 4 pieces. The connection of all metal structures is made by welding. The frame is of two types, depending on what the walls will be made of.

The first type: a wall made of prefabricated sandwich panels - frameless. The second type: prefabricated sandwich panel - frame (layer-by-layer manufacturing).

Do-it-yourself trading pavilion construction scheme

The support of the racks on the foundation is hinged * (a pair of bolts or welded along the contour of the pipe to the mortgage in the foundation). Only I raised the trusses a little, instead of 200 mm I made 300 (now 2800 and not 2700) since the slope should be 1:10 or more. Yes, and trusses cannot be welded with a smaller slope. Basically everything. Design Engineer (Moscow, Russia) Evgeny 1979 Forum Member Not currently available Tarantula thank you so much. everything is clear and accessible, but there is one snag, it’s my fault, I didn’t specify that the front part has a door and a window for the entire wall Welder (Rostov-on-Don, Russia) Miko (Tarantula) Curator of the subsection “Foundations and foundations, soil mechanics” Not currently available if it should be so, then everything is 50x4.
First, a frame made of timber is placed, then it is sheathed on the outside with any facing material. A wind-moisture-protective film is stretched under the lining.

On the inside there is insulation, which is closed with a vapor barrier film. All this is closed by the interior decoration of the walls. When installing walls by layer-by-layer assembly, additional racks from a profile pipe are installed in the place of the doorway to stiffen the doorway. When installing walls using sandwich panels, the frame is the corners with the installation of window openings in the places where the window openings are installed - frames from the corners. A closed frame is made of the corners for the entire window. Also done on the door.

The upper belt of the frame (base for the roof) It is made from a corner or a channel, depending on the size of the kiosk (pavilion). Beam - a jumper of the upper belt. Placed on every meter.

Most often it is made from a profile pipe.
Content:

1. What is a kiosk and what does it consist of?
- 1.1 Benefits of building a kiosk
2. Selection of materials and tools for building a kiosk
- 2.1 Materials for building a kiosk
- 2.2 Kiosk building tools
3. Building a kiosk
- 3.1 Creating a drawing
- 3.2 Mounting the kiosk
- 3.3 Installing the finished kiosk

A kiosk is a small architectural object intended for small retail trade, sale of catering products or provision of various services. The kiosk primarily consists of a load-bearing prefabricated frame.

How to build a trading pavilion with your own hands

As a beginner entrepreneur with no experience, but with ambition and a strong desire to conquer the world, you are probably looking at trade pavilions that can be your ideal point of sale, because they are very cheap, and their sales area is minimal, so renting a place for them is not will be a significant waste of money and nerves for you. And, of course, it occurred to you to build a trading pavilion with your own hands, which is also one of the most common options for starting a business.

The modern design of the pavilions will please you with an interesting design, an abundance of materials for manufacturing, as well as numerous ways of decorating that affect both the frame itself and the commercial equipment installed after the construction is completed.

Types of trading places:

Street trade pavilions and kiosks.

These retail outlets are designed exclusively for outdoor installation and are made of sandwich panels, which provides the ultimate in mobility and quick erection of the structure. Such a kiosk leaves the construction plant in the form of a frame-shield structure resembling a container. To install it, you do not need to take care of a solid foundation, a tape one will do.

Street kiosks can be used both for watchmakers' workshops, and for shoemakers, flower or press sellers, or bistro cafes. Their acquisition and installation are quite cheap, so a businessman who just embarks on the chosen path will be able to start acting by investing a minimum amount in business, but at the same time enjoying great freedom, because the number of pavilions is not so difficult to increase if necessary, but you can also move them, following for the level of sales in specific points of the city.

These trading places are huge tall buildings, which are designed for rental of premises by various enterprises and firms that have supermarkets, small trading pavilions, pet stores, jewelry stores and kiosks. Businessmen who choose this option can quickly and effectively increase and increase their income, which cannot be said about entrepreneurs who decide to create a trading pavilion with their own hands, because the maintenance and operation of a rented outlet is not so expensive and does not threaten you with the failure of your ideas.

Trade pavilions, photos of which can be found on the Internet, are the best option for owners of clothing or food brands, for owners of confectionery, bookstores, small departments of stationery, optics, bags or ceramics.

Trade pavilion according to your sketch

Today, many modern businessmen are striving to build shopping centers that differ from the standard ones, precisely because customers appreciate not only the quality of the products offered, but also the attractiveness and unusualness of the outlet itself, which they are invited to visit. Videos that are on the Internet will help build such an exclusive shopping pavilion with your own hands.

Video: DIY shop

Advice from an Expert - Business Consultant

Related photo

Starting a business, everyone wants to save money, and this is quite reasonable. One of the ways to save money when opening a stall is a self-constructed room. To make a stall yourself, you need to know some points.

Just follow these simple step by step tips and you will be on the right track in your business.

Quick Step-by-Step Business Guide

What you need to have: - metal pipes;
- galvanized sheet;
- chipboard;
- expanded polystyrene;
- Other building materials of your choice.
So, let's get down to action, tuning in to a positive result.

Step - 1
The simplest and cheapest stall is a welded frame. To build it, you first need to install the frame. The best material for it is metal pipes, because other materials (channel, profile) will not provide your stall with the required strength. Having done this, we move on to the next steps.

Step - 2
Now pay attention to the bottom of the frame, it will be three-layered. It should be sheathed with some kind of moisture-resistant material: for example, galvanized sheet or rubimast. This is necessary to protect the interior from the harmful effects of moisture. The next layer is chipboard, and the third layer is the finish of your choice. Having done this, we move on to the next steps.

Step - 3
Then the finished frame should be sheathed. For sheathing, you can use a galvanized profiled sheet. It can also be used as a roofing material. Having done this, we move on to the next steps.

Step - 4
For interior decoration, it is best to use chipboard. The heat-insulating material for the kiosk is expanded polystyrene or mineral insulation - it will protect from moisture and cold. Having done this, we move on to the next steps.

Step - 5
The door of the kiosk should also have an insulation pad to avoid drafts. Having done this, we move on to the next steps.

Step - 6
Show-windows of a booth can be made of a double double-glazed window. Make sure that they can be closed with metal shutters. This way you will secure your kiosk from unexpected guests. Having done this, we move on to the next steps.

Step - 7
Now that the kiosk is done, the most important thing is to conduct electricity, install sockets, switches.

We recommend that you pay attention to the following tips from the Business Consultant:
You need to install the kiosk at some distance from the ground to avoid moisture and freezing. For this, concrete blocks or a small brick foundation are suitable.

Additional information and useful tips from the Business Expert:
The kiosk can be sheathed not only with a galvanized profiled sheet, but also with PVC panels (lining). Both materials are durable and strong.

Corrugated aluminum sheet or linoleum can be used as a floor covering.

Corrugated sheet is a durable material, resistant to various kinds of influences, and highly environmentally friendly.

Linoleum - it can be baseless and with a base. The first option has good moisture resistance and low price. Linoleum on the basis is more expensive, but at the same time much stronger.

We hope the answer to your question contains useful information for you. Good luck! To find the answer to your question, use the form -

Every entrepreneur who decides to buy a Trade Kiosk and open his own business is primarily interested in three questions: the price of the kiosk, the quality of its manufacture and delivery time.

The price of a kiosk consists of 2 components: 1st is the base price of the kiosk itself, 2nd is the cost of additional options at the request of the Customer (roller shutters, electrics, internal partitions, decorative trim elements), as well as the cost of installation and delivery.

The base price depends on the area of the pavilion or kiosk and from the materials from which it is made, that is, the larger the area of the pavilion, the price per 1 sq.m. below and vice versa.

More details about the cost, quality of materials used and production time are described below in examples of work performed.

A flower pavilion or a flower kiosk is distinguished by a greater degree of glazing compared to a shawarma stall and other structures. This slightly increases the price of outdoor pavilions of this type. All pavilions are made of sandwich panels (insulated).

shopping mall

An unusual trade kiosk in the shape of a coffee glass is made of one-piece construction made of high-strength fiberglass, insulated, and designed for street trading at any time of the year.

Appearance: It has no joints (joints), has a glossy surface.

dimensions kiosk:

Bottom diameter — 1 800 mm
Upper diameter — 2 350 mm
Height - 2 750 mm
Weight - 400 kg.

Kiosk price in the form of a coffee glass is 275 thousand rubles.

The price includes: Glass kiosk, roller blinds on the window, electrics, internal shelves with a sink, passport. At the request of the Customer, external LED lighting and branding (pasting the kiosk).

Production time A: from 15-25 days.

For detailed information, email mail, if you decide to buy a kiosk "Glass", please contact us by phone specified in the section or fill out one of the callback forms.

The company site offers at affordable prices Trading pavilions for street trading, made according to a new, approved model.

Newsstand Size, made in the "Modern" style, is 2.4 x 4 m (area 9.6 sq.m.).

Kiosk price in the basic configuration, without additional options, is from 205 thousand rubles, per piece.

Kiosk completed made of sandwich panels, insulated.

Any color is possible, glazing from 3 sides (changes are possible at the request of the Customer).

Additional options:

Roller shutters for all windows
Frieze and decorative corners made of aluminum composite panels
Additional glazing of side facades + lamination in color according to RAL 9006
Rain canopy on the front

Preparation time is 15-25 days.

In order to buy a kiosk in the "Modern" style or choose a more convenient option for you, call the number indicated in the section or fill out one of the callback forms.

In the photo there is a stop pavilion in the style of Vidnoye

Dimensions:

stop pavilion - 3 x 6 m (18 sq.m.)
stop size - 3 x 2.5 m (7.5 sq.m.)

Pavilion equipment:

Mechanical roller shutters (Alutech profile) for facade windows
Decorative finishing elements made of aluminum composite materials (frieze, corners)
Electrical single-phase, 220V
Stained-glass windows - warm aluminum in RAL 8017 color
Walls, floor, ceiling - sandwich panel color according to RAL 8017/1015

Stop pavilions are transported ready-made on a manipulator, the stop is assembled on the spot. You can make any changes to the stop complex.

Preparation time stopping complex is 25 days.

In order to buy a shopping kiosk with a stop, contact us at the phone number indicated in the section

An example of interior decoration of trade pavilions:

Walls- sandwich panel, floor- sandwich panel, linoleum, ceiling(roof) - sandwich panel, window- plastic (PVC).

If you have made a decision: I will buy a trade pavilion and you have a place, then the installation of trade pavilions, kiosks will not be difficult. Our team will help you with great pleasure to find what you really need. Installation and installation of pavilions are included in the price!

What are pavilions and kiosks? They are modular structures from a hangar to a small stall, they differ in size, it will take you several days to purchase them.

The construction of pavilions and kiosks is possible at an affordable price and we are ready to offer it to you. The advantage of erecting trade pavilions is that they do not need laying the foundation, the production of pavilions and shops is done on a turnkey basis. We recommend not to postpone the decision to buy a pavilion or stall. In any case, it can always be easily moved to a new location if for some reason there are difficulties with renting a place.

The sandwich panel pavilion has a low cost, but excellent practicality in manufacturing and installation.

With respect to you and your business, company website