Framing the outer corner of the doorway with a wooden corner. The secret of doorways. Advantages of open interior passages

Every owner of an apartment or a country cottage dreams that it would be cozy, comfortable and beautiful inside. Now there is everything and even more to create original interior solutions - modern building materials, the latest technologies, a huge number of design ideas. However, in addition to finishing the ceiling, walls and floor, doorways also play an important role - they visually divide the premises among themselves and are an important part of the interior. Framing will help complement the interior design and get unique and interesting effects. There are various technologies and materials for this - consider the most popular and unusual solutions.

Opening shape selection

The doorway is considered a very important detail in a modern interior. Its task is not just to divide the room into several zones. A properly designed opening also performs an aesthetic function. Its forms can be very different, and the choice of material for decoration depends on them.

Generally speaking, there are openings with or without a door. There are also open arches. In the case of doors, part of the decorative trim should go directly to them. In the case of the arch, designers recommend drawing attention to it as much as possible. There are other forms of openings - these are standard rectangular, ovals, rounded rectangles.

About the choice of materials

How to choose the right frame and materials for the doorway? Let's give some examples. Stucco can be applied to any shape, but MDF panels are no longer so versatile, and they are best used with classic rectangular openings.

With the help of stone - both natural and artificial. Also, designers recommend taking a closer look at textile materials. With their help, you can evenly and very beautifully cover the entire opening. It is recommended to select facing materials not only based on the forms - it is necessary to take into account other elements of the interior. The opening dividing the rooms can be processed on the one hand using a specific technology and material, and on the other hand, completely different solutions can be used. In the case of narrow openings, they are sometimes expanded. If such a decision is made, all the nuances must be taken into account.

For large, wide passages, an oval shape with smooth lines is relevant. Framing doorways of such a plan can be made very interesting using unusual materials in the decoration.

Finishing methods

It will not be difficult to make everything beautiful - the modern construction market offers a lot of finishing materials. Construction technologies make it possible to apply original and interesting solutions. Very unusually decorate the passage with curtains. This is a very cheap solution that can look beautiful and stylish, and at the same time be practical. The curtain can be removed, washed and changed at any time. Another budget option is the wallpaper that was used on the walls of the rooms. This is also a good solution. And no matter what type of modern wallpaper is chosen - such a frame for the doorway will be very beautiful.

stucco work

Passages between rooms are often found in apartments and houses, reminiscent of openings in Venetian palaces. This is stucco. The ancestors of modern mankind used such technologies for decorating passageways, however, this method is still very popular today. Previously, gypsum was used for this, but today no one uses this material. Polyurethane took its place.

Framing doorways made of polyurethane comes down to buying ready-made elements in a building supermarket and gluing them to the wall of the opening - various elements are offered for every taste and in any style that allow you to create absolutely any pattern. But with polyurethane stucco, accuracy is needed - it is not for every room. If there is a doorway framed using this technology, then all other interior solutions should be in the same style. Otherwise, decorative patterns will stand out from the whole picture.

For small rooms, designers recommend using elements with a small relief - details with large molding will make the opening visually heavier. Polyurethane elements are produced in a standard white color, but you can repaint them as you like in the color of walls or ceilings. To create an exclusive design, sometimes you have to order a set of parts - you need to take this into account. For the installation of these products, glue or alabaster is used. It is recommended to pay special attention to the joints. They are rubbed with alabaster.

stone finish

Framing a doorway with stone is very popular, although this is a rather expensive solution that requires experience and certain skills. This finish will give the opening not only a beautiful appearance. The stone will increase the life of the wall.

Designers advise to make the upper masonry a little wider when decorating rectangular openings with stone to give more naturalness. To select the type of masonry, it is necessary to perform in compliance with the curvature. Passages without doors are trimmed on both sides.

With a minimum number of stones, the finish can be combined with other interior elements. Framing doorways with decorative stone is great for large rooms, rooms with a small amount of furniture. Also, this method is used when it is necessary to remove defects on the walls. You can use two types of stones - natural and artificial. Natural stone is all natural rocks. Artificial - made from natural materials. Visually, it is no different from natural. Among the advantages of artificial stone, the neutrality of this material is distinguished - it does not affect the microclimate in any way. You can also highlight the low weight of artificial products, incombustibility, resistance to moisture, resistance to damage.

Basic rules for stone finishing

Decorative framing of the doorway using this material is performed according to certain rules. Only in this way the result will be of high quality. The opening must be finished as evenly as possible - this applies to the entire surface of the wall.

Places near the opening and in the lower part can be highlighted using more massive stones. The top itself should not be weighted. Stone laying is performed, taking into account the curvature of the edges of the opening. Strictly monitor the tile seams, the elements are arranged symmetrically. Only then will such a frame of the doorway look as natural as possible.

Laying process

Everything is relatively simple here. First, natural stone must be selected in size or purchased ready-made stone tiles. If necessary, the dimensions can be adjusted with a grinder. Then a special mesh is attached to the wall, on which glue is applied. Next, the stones are laid. At the end of the work, the seams must be leveled and cleaned. The total drying time of the adhesive is about 48 hours.

Corner decoration - a budget decision

Framing a doorway with a corner is used when it is necessary to protect the corners after wallpapering or plastering, as well as just for decoration. Of course, it will not look particularly original, but it is an inexpensive and practical solution.

There are several types of corners. They are sorted by profile - it can be L or F shaped, T-shaped is also used. A corner with an unequal section is also used, which is intended for doorways. The dimensions of this element are 5x17 mm, 10x20 mm, 15x25 mm. Such corners are much easier to mount, they have sufficient flexibility. Attach these elements to a special glue.

As you can see, there are many ways to finish doorways. This diversity allows you to create original solutions and implement the most daring design ideas for beauty and comfort in the house.

A doorway without a door is sometimes an original way out when solving the problem of combining residential space. So, for example, not all homeowners want to install a door between the hallway and the living room, especially if the layout of the apartment is conducive to this. Quite often, the practiced combination of a loggia with a room is also done by removing the window and door frame, which expands the usable area. However, both of the above solutions at the same time create a new problem - the original and accurate design of the resulting opening.

Today, a very wide range of different materials is presented on the construction market, making it possible to design a living space in any style and for every taste. Therefore, there should be no problems in implementing even the most intricate project. Moreover, you can get by with relatively low costs, at the same time richly trim the doorway with a beautiful and original casing.

No need to think that the design of this element of the interior is not as significant as, for example, walls or ceilings. Until the last decorative details are installed, the general view of the premises will not have the desired completeness.

Finishing materials for doorways

Modern designers have developed a large number of design options for doorways, which are carried out using different materials. These include the following:

Decorative clinker tiles.
Stucco molding made of gypsum, or its imitation of polyurethane.
Plastic panels.
Fake diamond.
Natural tree.

In addition to, in fact, the finishing material, the chosen form of the doorway itself can become a design detail of the interior. And it can vary from traditional rectangular options to asymmetrical complex configurations.

Finishing with any of the above materials can be done on your own, having previously developed a design sketch and having the necessary tools and materials at hand.

Clinker tiles

One of the traditional solutions for finishing the opening is facing with clinker tiles under brick

Finishing doorways with clinker tiles has recently become quite a popular trend - this can be explained by the variety of colors of this material and the ease of use. Not only straight tile options are produced, but also angular ones, which are convenient for lining the corners of doorways, and they are suitable for both traditional rectangular shapes and for arches or semi-arches.

It is most often used for external facade decoration, but for certain rooms and doorways it will suit perfectly, especially if it is in harmony with the wall decoration. Sometimes, in addition, in combination with the doorway, the same material is used to cover the areas around the windows, so that the room immediately acquires its own style.

Sometimes clinker tiles are used in combination with smoothly plastered walls.

On the walls, according to the sketch drawn up, markings are made. This process is especially important if the tile will be laid out in the form of a chaotic asymmetric pattern.

The tile is laid in different ways, creating a smooth edge or a jagged, stepped one from it, often it is mounted with an offset.

Before laying the tiles, it is recommended that the area on the wall to be tiled be further processed, due to which the adhesion of building compounds will improve, and the material is guaranteed to be reliably glued to the surface. The primer must be completely dry before gluing the tiles.

Clinker tiles are glued onto tile adhesive or “liquid” nails - the adhesive composition is selected depending on the quality of the wall surface. If the wall has flaws or slight irregularities, it is best to use tile adhesive. "Liquid" nails can only be used with a perfectly flat surface.

Glue on the back of the tile is applied very carefully. If a cement or gypsum-based mortar is used, then its excess must be removed immediately, and it is better to try so that it does not protrude beyond the boundaries of the tile.

It is very important to ensure that the tiles are laid exactly horizontally. Control over this parameter must be carried out using the building level constantly during facing work.

When the adhesive has set, these sizing strips can be removed from the joints and the masonry left until the mortar dries completely.

After the glue dries, the seams between the tiles are sealed with a grout of a suitable color, in harmony with the finishing material or with the shade of the walls.

Fake diamond

Finishing with artificial stone is also quite a stylish option, especially since the choice of this material is even much wider than that of clinker tiles. It is made from natural rocks, crushed into crumbs, to which various polymers and dyes are added.

Artificial material very reliably imitates the appearance and texture of natural stone - it can be limestone, malachite, shell rock, jasper, marble and other rocks. There is an option that is simply called "wild stone", that is, without processing, which looks very original.

The colors of this material are varied, from cold gray to warm ocher, so it can always be matched to the shades of the interior.

The advantages of surface finishing with artificial stone include the following qualities:

Presentable, aesthetic and stylish appearance.
Excellent harmony with other materials.
Resistance to mechanical damage when properly laid.
Long service life without changing the appearance.
Ease of daily maintenance.

To finish the doorway, they usually select compact sizes of artificial stone, with a not very deep relief pattern, otherwise it will look too cumbersome.

For corners, it is best to choose special corner elements that are easy to install and securely fasten to surfaces.

Finishing with this material is carried out in different ways - sometimes it is laid, observing an even border, but more often the “torn edge” design technique is used. Using this masonry method, the finish is more natural, original and does not look “boring”.

Of course, choosing one of the options for placing tiles on the wall and in the opening, you need to rely on the general design style of the entire room.

An artificial stone is fixed in the same way as a clinker tile, on one of the tile adhesives or "liquid nails". It should be borne in mind that this material is much heavier than tiles, as it often has a large thickness, so the wall for its installation must be especially carefully prepared, be sure to treat it with a primer in several layers.

Facing with artificial stone is a rather laborious work, since each of the elements must be glued to the wall and held for some time so that the composition grabs. In addition, it must be said that this is a rather expensive material. However, it is worth it - the effect of a quality finish will be amazing.

Stucco, natural gypsum and artificial

Stucco molding along the perimeter of the opening without a door - columns with pilasters and capitals.

Nowadays, stucco molding inside modern apartments and houses can be seen quite rarely, although this is one of the most interesting styles of decoration, including doorways. Naturally, stucco is not suitable for every interior - it must be designed in a certain style, and in it all the elements must be harmoniously combined with each other.

However, if it is decided to make one of the rooms in a classical, Doric, Venetian or other similar style, where the presence of stucco elements is expected and will not be ridiculous, then the design of the doorway with it will certainly be “in theme”.

Previously, gypsum was used to decorate rooms and facades, and columns were often made of natural limestone. Today, these interior parts are also made from polyurethane.

Gypsum stucco elements are quite heavy, so it is quite difficult to attach them to the walls. Installation is further complicated by the fact that gypsum in a frozen form is very fragile, and if it falls even from a small height or if careless actions are taken during the cladding, the finishing element may break into pieces.

Gypsum stucco is, of course, a “classic of the genre”, but working with it is quite difficult

Polyurethane is very light, sticks well and sticks to any surface.

It is much more convenient to carry out finishing - use polyurethane parts "under stucco molding"

A very wide range of various details for decorating a doorway is produced - these can be borders, pilasters with capitals or even full-fledged columns that are glued to the ceiling and wall.

The range of polyurethane parts with stucco imitation is very wide

A variety of shapes and relief patterns of these decorative elements allow you to choose them for any, the most demanding taste. It is also very important that polyurethane is easy to color, which can create an imitation of natural stone or make the surface of parts glossy and perfectly white.

Similar polymer parts are also produced for modern design - with a relief that does not have floral patterns, elements of columns and capitals, but is made in the form of moldings. Although they can also be combined with modest architraves that will complement the arched or straight elements.

This version of the polyurethane finish can be disguised as natural wood or stone by painting them in the desired color and varnishing.

Installation of polyurethane parts is easily carried out independently on one of the polymer adhesives, "liquid nails" or a special adhesive "Moment".

It is probably worth noting that columns and pilasters are not particularly suitable for small apartments, since such details will overload the space, and it will seem even smaller.

If the house or apartment has high ceilings that make the rooms uncomfortable, it is worth rounding the sharp corners of the doorway and choosing an arched option for this.

In the case when a hall or hall in a large house is decorated with polyurethane parts, it is best to use columns decorated with Doric reliefs to create pomp and grandeur.

Plastic panels

Plastic kits for decorating doorways can even be purchased ready-made - they are produced for openings of various shapes: rectangular, arched and semi-arched, designed for different heights and widths. The platbands can be white or made with a textured pattern of one of the wood species, which can have different shades. It will not be difficult to choose the color of the casing for the overall range of the interior, as well as to install them on the walls of the doorway.

Typically, a finishing kit consists of the following elements:

Platband, which is fixed from the outside of the opening to the wall. As a rule, this element consists of three parts - the top bar and two side bars. If the opening is made in the form of an arch, then the upper part should be arched. If an opening is being finished that will be operated without a door leaf, then the kit should include two platbands, for one and the other side of the doorway.
Additional strip, which is mounted directly on the walls of the opening along its thickness and closes it completely.

For an arched opening, it must also be made in a certain configuration. Some kits are made of plastic that is flexible enough, so they bend perfectly to the desired shape. However, when purchasing such a kit, you should ask the seller to demonstrate the flexibility of the material immediately in the store.

Making doorways with just such a plastic kit is very popular, as it has a relatively affordable price and has a number of positive characteristics, which include:

Ease of installation of elements, which will be easy to do on your own.
Sufficient resistance to mechanical stress with careful operation.
Easy to care for, as the material does not accumulate dust and can be easily cleaned with a damp soft cloth.
Possibility to disguise communication cables under the panels. Some kits have a special entrance for them into the interior of the casing, located at the level of the plinth, and the design provides special channels for laying wires.
Plastic panels give the doorway neatness and visually distinguish it with an aesthetic frame.

The elements of plastic platbands and extensions are fastened to the walls in different ways - it can be gluing them to surfaces using “liquid nails”, and sometimes they are fastened with locking joints to special guides that are included in the finishing kit.

wood finish

Wooden architraves are traditional for finishing door and window openings, but not many people know that they can have a variety of shapes and designs. Of course, having decorative elements carved by hand or on special equipment will cost a lot, but they will also be used for a very long time.

If necessary, wooden architraves can be repainted, for example, if the entire interior of the room changes completely, including the color of the walls.

Finishing materials made of wood can be chosen for any style of decoration - they can look very simple or be decorated with curly carvings. An important advantage of the material itself and products made from it can be called its environmental friendliness.

In addition, it should be noted that even the most inexpensive wood, but well processed and coated with the necessary means to preserve the material, as well as decorated with paints and varnishes, cannot be distinguished from expensive wood species. It is not difficult to carry out these processes, so it will be possible to save on them by purchasing or ordering platbands in an unprocessed form from the master.

Despite the emergence of a large number of new types of materials from which platbands are made, wood will never lose its popularity and is often chosen to decorate doorways of any shape.

doorway shape

Since the shape of the doorway plays an important role in interior design, especially if it is not planned to install a door on it, then this parameter should be considered separately. The configuration of the doorway may be familiar to many - rectangular, emphasizing the classic style - arched, asymmetrical, trapezoid and other shapes.

archway

The arched configuration has recently become especially in demand when arranging a doorway without a door. This form has become widespread for the decoration of passageways in both standard apartments and large private houses.

The advantage of this shape is that it softens sharp corners. Visually, the arch makes the ceiling higher in the conditions of an apartment, and somewhat “lowers” it if the ceilings in the mansions are too high. If necessary, visually “lower” the ceiling, making the room more comfortable, you only need to slightly expand the arched opening, making it almost completely semicircular, without vertical sections.

In addition, such an arch will expand the space, and both rooms combined with it will look much larger.

An arched opening is usually installed between the living room and the kitchen or hallway. This solution makes the design original, and the interior more interesting. Each owner of the apartment, performing the installation on their own, gets the opportunity to make it exclusive.

Perfectly this version of the opening is also suitable for combining a loggia with a living space. Due to the expansion of the arched structure, the room will visually appear larger than it really is.

Try to make an arch yourself!

Drywall in skillful hands turns into a truly versatile material, opening up the widest possibilities for creating the most complex interior elements on your own. For a diligent and careful landlord, manufacturing should not be particularly difficult. To help him - a special publication of our portal.

Video: a variety of interior solutions with an arched opening without a door

Trapezoidal opening

A doorway of this form cannot be called popular, and it is quite rare to find it, especially in a city apartment. It must be said that such a frame, especially having a dark tint, has a somewhat depressing effect on the psyche. It may be more rational to use such a form in large rooms, where it will not become the compositional center of the design, but will neatly fit into it along with other decorative elements.

The appropriateness of a trapezoidal opening in a residential area is very doubtful

If, nevertheless, it was decided to use such a form to design an opening in an apartment where the ceiling is not very high, then you should not make the upper horizontal part of the trapezoid too narrow. Such a form will not only visually narrow the room and lower the ceiling - it will, as it were, make the interior heavier and, oddly enough, spoil the mood.

Such "hard" forms can negatively affect the psycho-emotional state of a person.

The lack of smooth forms in the doorway will make the room uncomfortable, even if wallpaper or other warm-colored decorative finishes are used for its general design. Therefore, if a choice is made of the shape of a doorway without a door, then it is better to refuse this option immediately.

Asymmetric opening shapes

There are a great many options for asymmetric openings - they can have smooth, angular shapes or combine several of the configurations. Choosing bizarre lines for the opening, one must not forget not only about the supporting structures of the house - it is far from always possible to expand the opening to the intended width.

Asymmetric openings - the widest field for the fantasies of the owners

A very important point is the psychological impact of forms on the mood of the residents. If you do not want constant hassles, irritability and misunderstandings in the family, it is best to avoid sharp corners and sharp shapes of doorways. If you still cannot do without such outlines, then they need to be smoothed out by placing smooth rounded transitions and shapes side by side.

Due to the fact that today in the construction markets you can find not only ready-made arched or asymmetric kits for decorating openings, but also a lot of other materials, designers and amateur finishers create the most unrealistic decorative configurations. One of the materials that is most often used for such work is drywall. It is used for sheathing structures created from galvanized metal profiles. These building materials have a very affordable price, but for the manufacture of complex, decoratively designed interior transitions, you will have to put all your effort and spend a lot of time, as well as work seriously on the project beforehand, adapting it to a specific doorway.

Drywall is a unique material for the construction of walls and partitions.

When thinking about redevelopment, the construction of new partitions or the reconstruction of existing ones, it is best to rely on the use of drywall. A special publication of our portal is devoted to the process of self-creation of internal ones.

In summing up, it should be noted that the above options for designing doorways without installing door panels are by no means the only possible ones. It is quite possible to independently develop and implement your own design project for this interior element. In this case, it is necessary to take into account the structural structure of the entire structure, since an expanded doorway in some cases can weaken the load-bearing walls and floors, which is extremely dangerous not only for residents of the upper floors, but also for those who live in a reconstructed apartment.

If any doubts arise during the preparation of the project, then it is best to contact specialists for the calculation or even for the performance of all work. They will determine the possibilities of load-bearing structures and calculate the allowable limits for the expansion of doorways without compromising the overall structure of the entire building.

Door structures take up extra space and are expensive. Maybe you should abandon them, and not spend either square meters or extra money? In order not to lose the design due to the lack of a door, you can make a decorative frame for the opening.

Upgrading with additions

It will not be possible to simply dismantle the door leafs and leave the opening in this form. The hinges and the box won't look pretty. Therefore, the opening will have to be revetted or redone so that it pleases the eye.

Obsolete doors can be simply removed

For this, supplements are perfect. Installing wooden extensions on the opening instead of the door will allow you to leave the old frame. It is not necessary to dismantle it too, if it does not interfere with lining the opening and sits firmly.

If the box is already worn out and staggers, then it is better to remove it and use other boards, wider. The dimensions of the board depend on the thickness of the wall, but we note that it is better to use a solid board for the opening wall. The principle is the same as in the manufacture of the frame. Vertical boards are cut to a board thickness less than the height of the opening in order to assemble a new additional frame.

Additional boards

It happens that the opening is not quite even. You can not make additions without checking the level of the walls. If there are irregularities, then the structure is leveled with wedges. After leveling the boards with wooden wedges, gaps are formed between them and the wall of the opening, which are filled with mounting foam and left to dry.

Mounting foam and gaps will be closed with a decorative strip. If there are no gaps between the wall and the extensions, then the extensions themselves play the role of a decorative strip. If the old frame is not dismantled, the extensions are attached directly to it with self-tapping screws. The hole and the cap from the screws will have to be hidden in some way, which is not always possible. You can use dowels and close them with wooden plugs.

Attention! H so that the attachment points of the extensions to the frame are not visible, you can use small stud fasteners that are recessed into the thickness of the board. Such fasteners are not striking, but to work with them, you will need a special tool.

The installation of additional elements is similar to the installation of a leveling frame. After using them to get even slopes, you can easily veneer them with a top coat. The main thing when cutting pieces from facing material is accuracy and calmness.

It is not always possible to achieve even cuts with a hacksaw, so it is better to arm yourself with a miter saw. This tool is also useful if you want to veneer the opening with stucco molding.

stucco work

Another way to ennoble a doorway is to use stucco. It is difficult to imagine what it is by its name, but ideas may arise in your head that it is molded by hand, and these are the right thoughts. This technology was used a long time ago by the Venetian rich, who decorated their palaces and houses with plaster. This method of decorating the interior, popular in the past, is still used today. A method, yes, but not a method. Gypsum is no longer used by anyone for these purposes.

Polyurethane molding

Brought it out of use technological material - polyurethane. And the decoration itself is no longer done by hand. The stores sell finished products made of polyurethane, which are attached to the wall of the opening. The choice of patterns, sizes and colors is great, but the white finish remains the true leader.

Stucco molding is a kind of decor element that needs to be combined with interior design. Most often, this finish is used in classic styles.

If you are afraid that the stucco will attract too much attention, use products with a small relief. Large drawings and complex patterns make the decor heavier, they are designed for spacious rooms.

Arch decorated with stucco

corners

There is another way to decorate openings - corners. The plastered surface has an unpleasant feature - to crumble over time. And the corners of walls and openings remain places subject to mechanical stress, which entails their abrasion and destruction.

Therefore, corners are used to protect and at the same time decorate. Depending on the intended purpose, perforated corners and decorative ones are distinguished. Perforated corners are also called plaster corners, because they are mounted on a convex corner of the opening even before plastering. Perforated corner gives strength to the structure and increases the life of the coating.

Perforated corner will protect structures from destruction

Perforated products are made of galvanized metal. When installed, they can be given any shape, bent to the desired radius, which allows them to be used to strengthen the arched structure. The perforated parts are attached to the self-tapping screws. After that, they are puttied, plastered, covered with paint or other facing material.

Decorative profiles do not have a direct purpose to ensure the strength of the coating, this is a kind of bonus for this decor element. Decorative elements are attached to PVC glue or liquid nails. Decorative corners are made of wood or plastic.

Wooden profiles are suitable for a small list of styles - classic or country. The wood is easy to set with glue, it is easy to maintain and clean. But there is one feature - a rigidly defined shape of the product. When a person makes an arch with his own hands, it is more than likely that he will get not a standard, but a unique arch, with its own radius, arc length and other characteristic values. Therefore, wooden products are used only if it is possible to choose the corners of the desired size and shape.

Plastic corners are more common. They come in matte or glossy, in different shades, often imitating wood. White products are more popular, it suits any interior.

Plastic beveled corners

What are the benefits of using plastic products? Plastic can be given any shape with little effort, change the arc angle by 3-4 degrees without the risk of damaging the structure. Plastic decor elements are easily attached. Liquid nails or mounting glue are suitable for this. Note that the use of plastic products to frame the opening will help protect the walls from abrasion and destruction.

It is impossible to glue plastic corners on top of the wallpaper, such fastening is unreliable. Therefore, you will have to prepare the surface in advance and remove excess sections of wallpaper. To do this, measure the width of the profile, subtract 3-5 millimeters from it. Cutting a strip of the same width is not entirely advisable, because flaws may occur in the process. Somewhere cut off a little less or more. If the wallpaper goes slightly under the strip, the decor will be more aesthetic.

Then the surface is cleaned of dust and dirt, after which a thin layer of glue is applied to the surface of the corner. It is applied to the surface of the wall, and then removed. The glue will not grab immediately, you need to wait 5 minutes, then attach the corner again and fix it in this position with masking tape.

When framing an arched structure, you will need to bend the plastic angle by a certain degree. A building hair dryer will help with this. Under a stream of hot air, the plastic corner will heat up, and it will be possible to bend it without damage.

Important! Do not use open flame to bend the plastic corner.

The framing of the opening performs two important functions. This is an interior decoration designed to emphasize the contours and lines of the opening and, instead, additional protection of the opening from mechanical influences.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your own ...

New Articles

New comments

S.A.

Grade

Svetlana

Grade

Sergey

Grade

Sergey

Grade

Alexei

Grade

Latest reviews

adminadmin

A lot of people want to diversify their interior. In addition to transforming the room itself, many are trying to highlight the doorway, while using a variety of methods. The design of the doorway is the first thing guests will see when they enter the room. It will definitely get attention. Therefore, it is important to know how to highlight this part of the interior.

Finishing Features

The doorway is very often trimmed without installing a door leaf. In this case, you can save a large amount of money on the purchase of a door structure and its installation. This finish is different in that it is very diverse and original. In most of the apartments, ordinary doors are installed, and in this way you can diversify the interior. A special doorway can be a highlight of any interior.

The doorway is able to blur the boundaries between rooms but also separate them. This design can make the room visually wider and more spacious. The finish is also distinguished by the fact that in this case the doorway is not necessarily drawn up in a classic rectangular shape, as is the case with door structures, but other forms are preferred. For example, you can make a domed, rounded, diamond-shaped, trapezoidal passage.

Also, the doorway is made out according to the principle of a closed type. In this case, it is filled with screens and partitions. This solution is perfect for zoning rooms and highlighting different functional areas. A feature of the doorway decoration is that it always initially has the shape of a rectangle.

You can change its shape with intricate patterns without having to carry out complex installation, which is a big advantage of this design.

Finishing the doorway can complement the interior design. So, strict standard forms are more suitable for classical styles, while newer and more unusual solutions are used for modern interiors. Such a design can have any complex geometric shape.

Another feature of the finish is that it is carried out in one stage. After that, you do not have to take care of the structure, as is the case with doors. When decorating and finishing, you can use absolutely any materials, there are no restrictions on this. In addition, the finish is different in that it is quite simple, anyone can do it on their own.

The doorway can have doors, an arch, curtains.

The principle of its design is divided into two large groups:

with doors;
without doors.

Options for framing the opening with and without doors in the apartment

Framing a traditional opening involves the installation of a door frame and a door leaf. At the same time, the size and appearance of the door can be absolutely anything. This is the most common design of the passage to the room. The door is used to separate rooms, it performs the function of sound insulation and thermal insulation.

But many decide to design a doorway without a door. The door structure is abandoned in the case when the entrance does not lead to a bedroom, nursery or other room, but to a more public room, such as a dining room, living room, hall, kitchen.

Thus, all these rooms unite and make the atmosphere in the house more comfortable.

Cashing the opening of interior products

To frame the doorway, a variety of methods are used, it can be both natural materials and their artificial counterparts.

Often used:

Plastic materials (PVC);
MDF panels;
chipboard;
Wood;
Polyurethane.

As a rule, this part of the room is framed with a tree. Very often, wooden architraves are made from finger-jointed wood. Moreover, pine very often acts as a source of wood, since it is durable. Wooden platbands are usually varnished, it looks very noble. Telescopic cashing is also very popular.

Carved cashing looks beautiful. As a rule, carvings are made by craftsmen with their own hands, and each such pattern can be very elegant and unique. More budgetary are platbands from MDF. But at the same time, they are not considered less high-quality and durable. They are absolutely not subject to rotting and many external influences.

The only negative feature of such a material is that it does not withstand moisture well. The easiest way to care for plastic platbands. They retain their original appearance for many years. As a rule, plastic platbands have the most interesting and bright design.

They are able to keep their color for a long time.

Plastic is absolutely not susceptible to the effects of humidity and temperature changes. In case you want to pass electrical wires and cables through the doorway, a PVC frame is an excellent solution. Such a platband has a special cable channel that simplifies this process. Some models look very luxurious due to the fact that they outwardly imitate a wood pattern. In general, PVC completely repeats the qualitative characteristics of plastic.

Platbands also share in appearance. Their width can be any, as well as thickness.

All of them are divided into:

flat;
rounded;
curly.

As a rule, these types of platbands are mass-produced in factories.

But carved platbands are a separate type, which is a product of the hands of a master, distinguished by originality.

Decoration with decorative stone

Decorative stone can decorate any doorway. Very often it is used after installing an iron door. He is able to hide any flaws and transform the appearance of the opening. Decorative stone is quite durable and looks very elegant.

It is resistant to external influences and looks great in any light. During the day it will sparkle in the sun, and in the evening it will shine luxuriously in dimmed light. Decorative stone is now decorating the passage by adhesive installation.

The decorative analogue of natural stone is lighter and more affordable in terms of cost. You can choose a model of absolutely any color and texture. So, you can decorate the passage with a wide variety of pebbles, while creating a unique pattern. The design of the corners with a decorative stone in the Roman style looks beautiful.

Also, many decorate the opening using the torn edge technique. It involves laying out a stone in a chaotic, not perfectly even order.

In this way, you can even create the effect of old masonry and lay out any bizarre shape.

Plaster

Plaster is now very often used to emphasize the bizarre shape of the arched partition. In this case, decorative relief plaster is used. It is combined with other finishing materials, such as artificial stone and tiles. Venetian and microcement plaster are also used as finishes, since such a lining looks very elegant.

But not everyone can finish the doorway in this way, for this you need to have special skills.

Wallpapering

With the help of wallpaper, not only the doorway itself is trimmed, but also the door leaf. Moreover, in the second case, the most resistant to external influences wallpaper is used for this, since the door is very often touched by hands. The simplest wallpapers can get dirty very easily, so it is important to use only high-quality and durable coatings. Wallpaper allows you to completely disguise the door, thus hiding the opening.

You can paste over the canvas with wallpaper of the same color and pattern., as well as all the walls adjacent to it. This finishing option is very often used to decorate the passage to the office. If you have a relief door installed, you can only partially steal it with wallpaper. With the help of wallpaper, you can even create drawings on the door leaf. In this case, you can cut out geometric shapes and other fragments from them.

Also, with the help of wallpaper, you can highlight the door leaf, pasting it with contrasting bright wallpaper that differs from the color of the walls. Moreover, such a coating can be partially painted to make it more unusual and interesting.

Arched structures are also trimmed with wallpaper.

Upgrading slopes with siding

Siding is a finishing material that has an interesting textured surface. It is distinguished by its frizziness. In this case, vinyl siding and even steel sheets are used. Such a finishing material is perfect for facing slopes and is quite durable. Moreover, as a rule, it is selected for the decoration of windows and window frames are framed in the same way.

Siding can be easily installed by hand and will be fairly easy to care for. Moreover, manufacturers present a wide variety of models from various materials, decorated in unusual colors. The desired coating can be chosen for any interior design.

Stucco decoration

Polyurethane stucco molding is often used to finish the doorway. For narrow doorways, smoother and not too embossed stucco molding is most often chosen. It is believed that too voluminous textures can visually narrow the aisles and make the room less spacious. Volumetric stucco molding is most often used to decorate high spacious doorways.

Stucco is fixed with a special glue. It is also often covered with varnish or paint.

This design looks very unusual and diverse due to the combination of interesting textures.

tiling

Now very popular is the edging of the passage with ceramic tiles. In this case, gypsum tiles or clinker are often used. Clinker imitates bricks and is perfect for finishing not only doorways, but also window openings.

Usually such tiles are laid out by analogy with brickwork. Such an analogue looks quite unusual and believable. Also, smooth tiles are used to finish the doorway. In this case, it is laid out with a mosaic. This design looks very bright and impressive.

Sheathing with plasterboard or clapboard

Lining and drywall are one of the most inexpensive finishing materials. That is why they are often used to finish the doorway. Both of these materials can be easily processed with your own hands using standard tools. You do not have to carry out long preparatory work.

As for drywall, it has a smooth surface, which is usually decorated with bright coatings. You can choose any decor option for decorating such material.

It is easy to install and lasts long enough.

stencil decoration

Now, murals and unusual drawings are very often used to decorate the entrance to the room. But not everyone can create a beautiful and unique pattern with their own hands. In this case, a stencil is used. So you can very quickly correctly and evenly apply images to the door leaf or to the edging of arched structures.

The only drawback of this finishing option is that it is rather boring, because the patterns will not be a picturesque picture, but only patterns of the same type. So you can decorate the doorway with vine leaves, branches, flowers and other images.

Textile

This finish is quite popular. As a rule, various curtains and tulle are hung between rooms, which fill the room with lightness and create an invisible barrier. They fill the design with air, making it more elegant. Curtains are usually chosen from silk, cotton, linen. Dense velvet models are quite popular.

Magnetic curtains are also installed, which are great for protecting against insects. There are also beautiful filament curtains in the form of rain. You can hang a translucent tulle, which will create a light veil between different rooms.

Facing arches between rooms

As a rule, the room is made more spacious by creating an arch at the entrance. In this case, such structures are often installed at the entrance to the room from a narrow corridor. The arch fills it with space and comfort. Arches can have the most unusual and intricate shapes.

In this case, the choice of the shape of the doorway depends on the taste of the owner of the house and on the style of the interior.

Most arched structures are symmetrical. For their decoration use the same materials on both sides. But in some cases, arches can be asymmetrical in shape and design. For rooms in a classic style, only symmetrical models are selected. In this case, they are often lined with decorative stone, wood and other natural or imitating natural materials.

Arches with vertical slopes in the form of columns look very nice. This solution is perfect for those who adhere to the classic interior design. For a more artsy style, they choose the design of arches with a wide variety of decorative elements. To do this, use an unusual stucco molding. The upper part can be decorated with a plaster bas-relief.

More modern arches have a fairly simple design, but can have bizarre shapes.

In this case, they are distinguished by unusual lines and intricate patterns.

Some nuances

When choosing a design, you need to consider some rules. The decor of a wide and narrow doorway should be different. For a wide one, more embossed and large decorative elements are usually selected, and narrow openings are decorated with simple finishing materials. It is better to use light decorative elements for this.

A high doorway is often designed in the form of an arch. She is able to add luxury and grace to the interior of the house. It is not customary to decorate a deep doorway with arches, because then the design will look very massive. But in this case, an arch model with large columns is suitable.

If your goal is not to unite different rooms, but to delimit them, then compartment doors are perfect for this. They well separate different functional areas and look very stylish. Most often they are used to decorate rooms in modern styles.

When choosing a material for cladding, attention must be paid to the quality of finishing materials. Many inexpensive plastic panels are very unsustainable and can even release harmful substances. Therefore, try to give preference to only high-quality materials.

Polyurethane finishing materials should not be installed at the entrance to the kitchen. This is due to the fact that they are characterized by low thermal stability. To design such a doorway, you should choose materials that are more resistant to elevated temperatures.

If you want to dismantle the door frame for finishing, you should consider that this can lead to cracks in the wall. That is why, before dismantling it, it is necessary to install a power frame.