The project of a one-story house with three bedrooms: which one is better. Ideal home for a large family: one-story house plans with three bedrooms

The main reason for the popularity of low-rise construction is the provision of the most comfortable living conditions. This became possible thanks to the use of autonomous engineering networks and the introduction of modern materials and technologies. One of the most popular construction options are projects of one-story houses with three bedrooms.

Features of projects of one-story houses with three bedrooms

One-story buildings have several advantages that have led to the widespread use of such projects in private housing construction:

• Low load on the foundation. It allows the construction of a building in conditions of weakly bearing soils;
• The absence of stairs and passages of communications to higher floors in the project. Thanks to this, the layout of the building on one floor allows you to effectively use the available space;
• A higher level of comfort for the elderly, young children and people with disabilities, as they do not have to go up to the second floor or even higher.

An important feature of single-story building projects is the creation of optimal conditions for living under one roof for two or even three generations of the same family. Therefore, such projects are in demand that take into account the placement of at least three bedrooms and the presence of one spacious room where all the inhabitants can gather. This is necessary for the comfortable living of numerous family members, and each generation receives its own autonomous space.

Examples of finished projects

Due to the increased demand, a wide variety of projects of one-story houses with 3 or more bedrooms have been developed. A typical example is project No. 58-01. The one-story cottage has a large area (197.08 sq. m.). It allows you to place not only three spacious bedrooms (from 15.3 to 18.5 sq. m.), but also, thanks to a competent layout, separate the recreation area from the living room and a kitchen-dining room with an extensive hall (23.7 sq. m.)

Placing three bedrooms in a one-story house is realistic even in a small area construction project. An example of such a solution is project No. 59-61 with a total area of ​​​​only 102 square meters. m. Three bedrooms are separated by a spacious living room (20.6 sq. m.), which can comfortably accommodate the inhabitants of the house. An important feature of the building plan is that one bedroom is located separately from the other two. This is done to accommodate a family with a small child so that his crying or anxiety does not interfere with the rest of the sleep. Or vice versa, for the rest of the elderly away from the restless and noisy youth.

Good afternoon, forum users! Here is such a layout, I would like to hear your opinion, maybe someone did something similar. Well, in this layout, share a bathroom.
1. Development region - Ryazan region, Ryazan district.

2 . Planned materials for construction - aerated concrete block, facing brick

3. Plan / description of the site with the proposed location of the house and indication of the cardinal directions, the presence of a good view - a plot of 10.5 acres, 25 * 41, an extreme plot, the location of the house is the northeast of the plot, the entrance to the site and the house - from the north.

4. Planned number and height of floors, used attic, ground floor? Will the house be used for permanent residence or seasonal use 1 floor, cold attic, permanent residence

5. Planned type of heating, the need for a separate boiler room - gas, boiler room

6. Family composition (with age and gender of children) - while two adults with the prospect of children

7. What premises should be obtained according to their functional purpose (number of bedrooms (minimum allowable size), bathrooms, the need for a "second light", a guest bedroom, an office, a separate laundry room, a utility pantry, a pantry in the kitchen, a garage in the house, etc.) - kitchen-living room, 3 bedrooms (bedroom, guest bedroom, nursery, dressing room, boiler room (possibly with an entrance from the street, a separate bathroom, a porch on the side of the house under one roof, access to the veranda from the living room. Still, the bedrooms should probably be located in the north and north -west, kitchen-living room in the south and southeast.

8. Please check that the volume of your boiler room for a gas boiler exceeds 15 cubic meters (if the boiler is gas and is not located in the kitchen)

9. Your decision on the following questions:
- do you need a separate vestibule to reduce heat loss or a vestibule-entrance hall?, entrance hall

Can the kitchen and living room be combined or should they be 2 separate rooms?, combined

Can the bedroom doors open into the kitchen/living area or do they need to be soundproofed by the hallway? isolated

Do you need an isolated dirty hallway area or is it not difficult to wipe the floor once again?, an isolated area

Personal sous and dressing room in the bedroom dream or excess?, excess

Entrance to the bathroom the node should not be visible from the front door or is it not important?, not important

The working area of ​​\u200b\u200bthe kitchen should not be visible from the sofa or is it not important ?, not essential
10. Planned construction and financing schedule.
-indicate the planned budget for building a house for interior decoration (with facade work, communications, etc.) about 2.5 million, how will it go

Indicate the planned construction schedule (season, year, several years) and performers (self-build, private company / team, 50/50), 50/50, no particular urgency

9 Reasons Why You Should Use 3-Bedroom Single-Story House Designs in Construction

Each developer is looking for options on how and on what to save during construction, both residential cottages and seasonal premises. And without thinking about the fact that it is the project that facilitates the construction process and avoids unnecessary costs, developers begin to build private one-story houses with three bedrooms without a project.

In this article, we will consider why it is necessary to buy projects of one-story houses with three bedrooms. Consider the main advantages of projects, as well as the presence of diagrams, sketches, photos and videos in them:

1. The project and schemes of one-story houses with 3 bedrooms allow you to more clearly represent the final result of construction.

Projects on the basis of which one-story houses with three bedrooms are being built (photos of which are also often attached to them) allow the developer to present a new private house after construction is completed. The project contains a large amount of information that is simply impossible to keep in your head (layout, design calculations, lighting and communications schemes, design of one-story houses with 3 bedrooms, and much more).

2. The project is the best guarantee that finished one-story houses with 3 bedrooms will be of high quality and serve for a long time.

However, it should be understood that this condition is feasible only when residential one-story houses with three bedrooms are built by professional builders with extensive experience. Author's original projects and typical one-story houses with 3 bedrooms include parameters that are calculated exclusively in compliance with all building codes and state standards. Based on this, you can be sure of the quality of the house, that its walls and foundation will not crack, the floors will not bend, and there will be a comfortable climate for living. The one-story, three-bedroom cottages that were built according to the project, as a rule, are a holistic organism, with a well-thought-out layout and taking into account a large number of features. For example, plans for one-story houses with 3 bedrooms, which take into account the peculiarities of the location of the house to the cardinal points, as well as the thickness, “pie”, wall construction; the location and size of the windows are more economical in terms of electricity and heat supply.

3. The project is a guarantee that even inexpensive one-story houses with three bedrooms will be functional and comfortable.

Building on individual projects is quite popular because it allows developers to include a convenient and functional layout in the project. The layout of one-story houses with 3 bedrooms is a serious issue that needs to be resolved with responsibility and slowly. This is because the catalog of 3 bedroom single storey houses offers many layout options, and making a mistake at this stage will be costly in the future due to reworking the shortcomings.

4. The design is the most important tool to prevent future rework.

The project allows builders to clearly see the end goal, which helps to prevent mistakes during construction and the need for rework in the future, and therefore avoid unnecessary costs.

5. The project allows you to transfer part of the powers associated with the construction of the house to the involved party.

Construction companies can be involved and start construction work only if there is a project.

6. The project allows to carry out quality control of construction works.

Any claims against builders regarding the quality of work on building a house can be made solely based on the information that is in the project. Any verbal wishes regarding the height of ceilings, wall thickness, window size do not oblige the builders to fulfill them.

7. The project is the basis for creating an estimate.

Without a project, it is impossible to draw up an estimate, which is a reliable tool for controlling the cost of building materials.

8. The project makes construction more economical.

On the basis of the project, the cost of one-story houses with 3 bedrooms can be calculated and an estimate is made containing information on the types, price and quantity of materials. And this avoids the purchase of excess materials.

9. The project allows you to save time and nerves.

When the construction of the house goes according to plan in accordance with the project, you can be calm. This eliminates the need for constant presence at the construction site.

A one-story, 3-bedroom house has advantages over a two-story building in terms of its accessibility for people with limited mobility, the elderly and children.
In addition, many owners of land plots prefer the construction of not huge multi-storey cottages, but small cozy houses on one floor. How to make a project of a one-story house with 3 bedrooms suggests considering this article.

Before proceeding with the construction of any structure, it is necessary to consider and draw its project.
In this case, you can:

• Get maximum comfort from a carefully thought-out home layout.
• Clearly determine the set of building materials, their quantity, it turns out the preliminary purchase price.
• Calculate the approximate economic effect of heating, water and electricity use.
• Savings in the use of building materials.
• The cost of building a house is reduced, and the work process is facilitated.

Tip: When choosing a project for the construction of a one-story house, it must be borne in mind that buildings up to 100 square meters are used for small families.

How to design a one-story house with three bedrooms

Single storey with 3 bedrooms adapted to the modern world. They look perfect in the woodland. Their layout provides daily comfort for the whole family.

Above the front passage is a beautifully extended roof, which is a covered porch.

The plan of a one-story house with three bedrooms includes:

• The living room is the largest room. There are special compartments in the walls where cabinets and a TV are installed. From the living room there is access to the garden.
• Kitchen. It has a pantry and a large window through which you can watch the play of children in the yard.
• Three bedrooms, but if necessary, you can attach another one in the attic.
• Spacious corridor through which you can go to any room.
• Between the living room and the kitchen there is a fireplace, which is connected to the heating system, which provides full heating for the whole house in winter.
• In the utility room there is a bathroom and a large bathroom.

How to increase functionality at home

Before determining which rooms can be combined, it is necessary to consider each room - its usable area:

• The living room is calculated taking into account all family members and the maximum number of guests.
• The size of the kitchen is planned in terms of its functionality. Here you need to take into account the need for convenience in cooking.
• Under the wardrobes, the area is allocated in each room, or you can arrange a common wardrobe with your own hands.
• Under the boiler room, the room is calculated for the boiler and its technological requirements.

When distributing premises by size, a lot of nuances are taken into account, so it will not be possible to purchase projects of one-story houses with three bedrooms for free. The owner of the site can understand the basic principles and consider examples, but a professional designer must calculate everything correctly.

The most common associations are:

• Bathroom combination.
• Living room and kitchen, or dining room and kitchen, as shown in the photo. In this case, one room can be allocated for two zones.
• Boiler room and pantry. Although this option is incorrect, it is often found in homes.

With this combination, you can maximize the use of the area and increase the specific living room in a one-story house with three bedrooms.

In this case:

• When combined, each room increases by the thickness of the partition (see) or walls, the thickness of which is not less than 10 centimeters.

Three rooms for bedrooms - the optimal layout for a one-story house. The video in this article can help you understand the basic principles of room layout that you need to pay attention to before starting to design houses.

Planning your 10x10 three-bedroom home

A one-story 10x10 three-bedroom house is well suited for a small family planning to have children.

Such a house can be built quickly or capital construction can be performed from several types of material:

• "Canadian technology" allows you to quickly build a house and operate it for quite a long time.
• It is quickly possible to build from foam blocks, which saves time and conducts insulation according to a simple scheme.
• Brick building. In this case, building one floor is much easier.

The easiest option for building a three-bedroom house is to use foam blocks or bricks.

In this case it is necessary:

• Lay the strip foundation.
• Make reinforced concrete floors.
• The attic option requires wooden rafters, a flat roof requires waterproofing of reinforced concrete floors.

The instruction suggests that a three-bedroom house should have:

• Living room.
• Pantry.
• If necessary, a small room under the wardrobe.
• Kitchen.
• Canteen.
• Shared or separate bathroom.

Tip: When planning your housing, you need to pay attention to the fact that some rooms can be combined, which will increase the functionality of the entire structure and use the entire square to the maximum benefit.

Construction of a frame house

Features of the construction of frame houses are their:

• Construction speed. It is achieved due to the fact that the construction of the cottage is being built quickly enough.
• Price. This indicator is reduced by reducing the cost of building a heavy foundation and the use of expensive materials, reducing the speed of construction.
• Installation of structures can be done all year round, which will not affect the final result.
• The light weight of the building does not give much shrinkage, so you can start finishing the house immediately after its installation.
• In the manufacture of the frame in the factory, all materials are processed to protect against moisture, harmful chemicals, which protects the house from cracking during operation.

In Russia, it is customary to use two main technologies for the construction of frame houses:

• Canadian, involves the use of dense insulation such as extruded polystyrene foam.
• Finnish, uses mineral wool insulation with low density and the use of a more massive frame.

In any case, when choosing a particular technology, the main criteria should be:

• Building quality.
• Durability of operation.
• Saving electricity.
• Simplicity of design.
• Cheapness at home.

Although all houses should meet such criteria, the three-bedroom one-story frame house project is the most affordable, in every way.

The disadvantage of such construction when using ready-made frame houses is the lack of a sufficient amount of money at this moment and a certain limitation in the amount of material. Whereas piece technology provides an opportunity to gradually master the available funds.

To keep the bedroom comfortable and warm

The sleeping room should be the warmest in the house - and this is understandable. The issue is all the more relevant when the bedrooms are located on the first floor, the floor of which is quite cold in winter.

This problem needs to be given special attention: both during the construction process and during the production of external and internal finishing works. Then not only the bedrooms, but also the rest of the rooms will be comfortable and cozy.

So:

• In private houses, heating is arranged autonomously. As an energy carrier, a solid fuel or wood-burning stove, a gas boiler is usually installed. Their work will be effective only if the thermal insulation of all house structures is up to the mark. Otherwise, excessive fuel consumption will greatly affect the family budget.
• And here it doesn’t matter what the dimensions of the building are: a small cottage or a house project with 5 bedrooms - no one needs extra expenses. The most optimal solution in this case would be the organization of additional heating. And here there are two options: use ceiling infrared heaters, or equip a floor heating system. Heaters are not very convenient for the reason that they depend on the electrical network.

• Cable and film floors also depend on electricity, but the energy carrier in water floor systems is hot water, heated by the same boiler. At the request of the customer, underfloor heating can be provided in the project, and built into the floor structure of the first floor at the construction stage.
• For example, it can provide heated floors in each of them. The choice of a specific option for additional heating depends on the design of the house, as well as the type of floor covering to be installed. For example, rod mats are best mounted in a concrete screed, and infrared film can be laid in a wooden floor, and even under a carpet.

• Water heated floors are universal, they can fit into any floor structure, and besides, they can be used as the main heating. It even has its advantages: it will eliminate the need to install heating radiators, which disfigure the interior so much. Moreover, the window sill area can be used in the design of the room with much greater benefit by arranging a bench there or equipping a comfortable workplace.
• You can see one of the options for such a practical use of the window sill in the photo above. If the heating in the house is traditionally equipped, and you feel that there is a need for additional heating, you can install an underfloor heating system without even dismantling the floor. Just have to do the second flooring.
• As for infrared film heaters, they can be mounted not only on the floor, but also on walls, inclined surfaces, and even on ceilings. In our country, most regions have such a climate that additional heating of the premises does not hurt. And underfloor heating, like nothing else, helps to solve this problem.

• Floor heating is important not only for bedrooms, but also for bathrooms, which are often adjacent to them. In a large house, as a rule, there are several of them. For example, a house project with five bedrooms may include at least three bathrooms, both combined and separate. One of them is a guest toilet, which is usually located on the ground floor, near the entrance.
• The second bathroom, combined with a bath, is intended for general use. The entrance to it will be from the corridor or hall. The bedrooms have adjoining bathrooms for the private use of their occupants and are only accessible from inside the room. This is usually done in matrimonial and guest bedrooms.

• In addition, a modern project of a 1-storey house with 3 bedrooms may include the following layout: lobby; separate kitchen; technical room where the boiler is installed; wardrobe; large living-dining room with access to the terrace.

Sleeping areas are usually concentrated in one part of the house, opposite the dining room and kitchen. Everything is very compact and convenient - it remains only to think about the design of the house so that its internal content cannot leave anyone indifferent.

Finishing and interior design

Of course, each inhabitant has his own tastes and preferences, which he can express only in the design of his room. Bedrooms can and should be different, but it is desirable to finish the rest of the rooms in the same style - this is the only way to achieve harmony.

So:

• The choice of design option is carried out depending on the purpose and area of ​​​​a particular room. Much depends on the design features of the house, because load-bearing beams, wooden frame racks, and a log surface, and brickwork can participate in the decoration.

• It is also very important from which side: external or internal, the walls will be insulated. So, it is simply impossible to give uniform recommendations for all occasions: we offer options, and you already decide whether it suits you or not. You can also turn to a professional designer for help, unless, of course, you are afraid that the price of repairs will increase significantly.
• If you do not build a house yourself, but, for example, buy a cottage with a rough finish, the developer can offer you a choice, and, of course, for a fee, a design project for interior decoration. If you like the concept, but there is a desire to change some details, or change the color scheme, this can be done by agreement. As they say: "Any whim ...".

• Of course, projects of houses with five bedrooms, one way or another, involve the participation of a designer, because it is quite difficult to decorate and comfortably furnish such a huge house on your own. If a person has funds for such housing, then there will be money for its design. Our tips for those who do not have such a budget, trying to do everything with their own hands.
• If the walls of the house need insulation, then you should choose those types of finishing materials that are mounted on a frame, in the cells of which insulation can be laid. In this case, the walls can be sheathed with drywall, choosing the option of a beautiful finish. And there are a lot of options, thanks to the huge range of wallpapers and colors for water-dispersion paints.

• The main thing is to choose and combine shades correctly, not to make the interior monotonous. To do this, one wall, or its individual sections, can be highlighted with a contrasting color, pattern, interior sticker. In principle, this can be done using any finishing materials, many of which are also mounted on the crate - these are various panels, boards, laminate.
• All of them are used only to create an accent, as, indeed, facing materials mounted on glue. These include all types of roll coatings, gypsum and bamboo panels with a 3D effect, natural and decorative stone, ceramic tiles and various brick-like imitations - even PVC stretch film.

• Now there are so many new products, beautiful modern finishing materials that it is sometimes very difficult to make a choice. Let's say you like simplicity, minimalism, spartan furnishings. Panels will come to the rescue, but not classic solid wood, mounted at the bottom of the walls, but smooth, with a pronounced wood texture.
• Most often, it is MDF covered with wood veneer, or a wood-polymer composite. With these panels you can finish the wall to the ceiling, but only one - if you do not want your bedroom to look like an office. To prevent this from happening, the configurations of the cladding, its textures and colors must be combined, as is done in the example we have given.

• Wall decoration can be done quite modestly and discreetly to emphasize, for example, the beauty of a ceiling structure or a chic floor covering. This means that the focus does not have to be on the wall. And if the floor is often covered with carpet, then the ceiling is always in sight.
• And here there are a great many options: drywall and stretch fabric, wood and glass, gypsum panels and stucco, various combinations of ceiling finishing materials. You can see one of these options in the example below. This complex structure is made of plasterboard, with inserts of stretch glossy film and glazed frames with photo printing.

• It also has practical significance: it divides the living-dining room into zones. Of course, this is a design work, and such a ceiling will not be cheap. But at least in one room intended for receiving guests, the ceiling should be amazing. For other rooms, you can choose more modest options.

Do not forget about accessories: beautiful curtains, wall panels, paintings or photographs on the wall in original frames can enliven and decorate any room - even without the use of expensive materials.

How many bedrooms should the house have?

The main advantage of a private house is its space and sufficient living space. As a rule, there is a shortage of the latter in apartments, especially if the family is large. In 2, 3-room apartments, you will not get more than two bedrooms, and there is not enough space for personal belongings. When the season changes, the shuffling of clothes begins. In autumn, summer things are hidden on the mezzanine, in spring - winter things. And even an average family with two children, especially if the children are of different sexes, needs three bedrooms: one for parents and two for children. And if there are more children, there is nothing to talk about at all. In this case, three-bedroom house designs are just a godsend. Naturally, in addition to bedrooms, the house should also have a bathroom, an entrance hall, a living room, a dining room, a kitchen, an office and other rooms if desired. Even if there is only one child in the family, the third bedroom can be taken as a guest room or simply wait until the family is replenished.

A three-bedroom home project can be any number of storeys, layouts, or styles. The material from which the house is built does not matter. It's good when all the bedrooms are concentrated in one part of the house. In this case, it turns out, a kind of recreation area. This is convenient because the roar of dishes in the kitchen will not interfere with sleeping family members. In addition to bedrooms, this area can have a bathroom and wardrobe. If the house is one-story, then a part of the house, approximately half, is allocated for the bedrooms. The second one houses the kitchen, dining room, living room, utility rooms and more. But it is even more convenient when the house has an attic or a second floor. Then the recreation area will be even more convenient. In addition to the fact that the second floor has better sound insulation, it is also warmer. This is due to the fact that the first floor performs the function of an air gap. On it, the floor must be insulated, it is advisable to put waterproofing, so that cold and dampness do not pull from the basement or from the ground. But the floor of the bedrooms will be much warmer.

Where and how can I buy a three bedroom project?

It turns out that three bedrooms in a private house is the optimal number for a modern family with two children. Projects of houses with three bedrooms can be viewed and bought on the website of our company Dom4M. We offer our customers a wide range of ready-made projects, but we can also make individual ones. The latter will be developed specifically for the customer. Such design begins with a study of the site: the composition of the soil, the landscape, the proximity of groundwater. Naturally, the price for individual projects of houses with three bedrooms will be slightly higher than for ready-made ones, but, in general, all the prices of the company are economically justified and affordable. Also, if necessary, it is possible to adapt the model project you like. This service is especially important for a country like Russia. Huge expanses, different climates and weather conditions in different regions of a large country contribute to the diversity of building materials used. For example, what is good in the Krasnodar Territory is unlikely to be suitable in the Far East. It is possible to adapt the foundation or reorient the frame house to a brick one, while the appearance of the house will be preserved as much as possible. In any case, when choosing a three-bedroom house project, it is better to first consult with experts. Employees of our company will tell you which project is more suitable for certain conditions, and help you choose the best option.

Today, the purchase of any project comes down to visiting the site, clicking the "buy" button and filling out a simple form. You can receive the project using a courier service, pickup from the company's office or receive it by mail.