Good housewives always have perfect cleanliness in the house. This also applies to plumbing. But sometimes, after long-term use and with rare preventive cleanings, various contaminants appear under the rim and on the walls of the toilet bowl, which can be very difficult to eliminate. This problem is not very pleasant, but it can be dealt with fairly quickly. Let's find out what means (and how exactly) you need to clean the toilet so that it stays clean.
Causes of pollution
Before deciding how to clean the toilet, it is necessary to classify the pollution and understand the cause of its occurrence. The following types are considered the most common:
- urinary stone;
- lime scale;
- Yellow plaque;
- Rust;
- Black.
Photo types
Urinary stone appears due to stagnation of urine in the toilet
Limescale is caused by the deposition of minerals found in the water.
Yellow plaque appears due to clogging of the hole from which water is supplied
Rust often appears due to a faulty cistern
Blackness appears due to the constant presence of water at the same level.
And now let's find out the cause of the occurrence of one or another type of pollution. So:
- Urinary stone appears due to the forgetfulness of the "users" of the toilet. After defecation, a person may forget to flush the water. If this is repeated often, the urine dries up on the walls, which leads to the appearance of stains, and subsequently urinary stones. Getting rid of them is quite simple, but it is best to simply not bring the matter to their appearance, cleaning the plumbing in a timely manner.
- Limescale is a deposit of minerals contained in water on the walls of the toilet bowl. It should be noted that they are present both in river water and in well water. Thus, the more often you flush the toilet, the more likely it is that the problem will get worse.
- Yellow plaque is removed very quickly. But if you start the situation, it can become the main cause of clogging of the holes through which water is supplied to clean the inside of the toilet.
- Rust most often appears due to a faulty tank. If even a small trickle of water constantly flows from it, over time it forms a rusty stripe. It is necessary to fix the tank, otherwise this problem will haunt you all the time. It should be noted that the more iron is contained in the water, the faster the rusty coating will appear.
- Blackness appears in the place where water lingers. This is the simplest problem and the easiest to fix. You just need to regularly work out the inside of the toilet with a brush, especially in the place where the water level ends.
Helpful Hint: On the rough surface of the inside of the toilet, plaque builds up much faster. Therefore, in some cases it will be easier to simply buy new plumbing with a perfectly smooth surface.
How to clean folk remedies
If you have already “launched” the cleanliness of the toilet, and even a brush does not help, you need to resort to folk methods to eliminate pollution. Folk methods can be used in private homes with a local sewer system (septic tank) and plastic pipelines.
Helpful Hint: When cleaning the toilet bowl, for safety reasons, it is necessary to protect the respiratory organs and hands from the ingress of toxic fumes and cleaning agents. Use rubber gloves and a respirator. Also protect your eyes from splashes.
table vinegar
Table vinegar will help get rid of limescale and urinary stone in the toilet
Table vinegar can dissolve limescale and urinary stone at home. To do this, apply it to contaminated areas and leave for a while. Before proceeding with the procedure, you need to pump out the water from the toilet and wipe the inside of the bowl with a dry cloth. After that, moisten a napkin with vinegar and apply it to the problem area. After about 4-6 hours, clean the plaque with a scraper or brush. Repeat if necessary. To enhance the effect, first warm the vinegar to + 50 ° C, and then add baking soda to it (1.5 tablespoons of soda will be needed for 300 g of vinegar) or iodine solution (in equal proportions).
Technical oxalic acid
Technical oxalic acid will help get rid of urinary stone in the toilet
Technical oxalic acid looks like small colorless crystals. This is a fairly effective tool with which you can get rid of urinary stones. It is poured under the rim and aged for about an hour. Oxalic acid crystals can also be diluted with water or alcohol. The effect will be about the same. After 60 minutes, wipe the smeared surface with a cloth and clean with a ruff.
Lemon acid
Citric acid will help get rid of plaque and yellowness in the toilet
Citric acid is an inexpensive substance that can be bought at any store. It does an excellent job with a lot of dirt, including stone deposits and yellowness on the toilet. A couple of sachets of citric acid will break up plaque and stone in about 12 hours. To achieve maximum effect, it is better to repeat the procedure 3 times in a row. Citric acid is one of the substances that can return your plumbing to its perfect look.
Baking soda
Baking soda will help get rid of plaque in the toilet
Baking soda is also effective in removing plaque from the toilet bowl. It is necessary to pour it in large quantities on places of severe pollution and leave it overnight. In the morning, rinse off the water and rub the brush on the places where soda was applied yesterday. If the first time it was not possible to remove all plaque, repeat the procedure.
Soda water, Coca-Cola
With the help of Coca-Cola, you can remove any dirt from the toilet bowl
Soda, which contains a large amount of citric acid, can clean any toilet bowl contamination. The best option in this category is Coca-Cola. To clean the plumbing, you will need several bottles of soda. Pour sweet water into the toilet at night. In the morning you will not notice the slightest trace of pollution, as it will corrode everything. You can also simply moisten a rag with carbonated water and put it inside the toilet bowl on the contaminated surface. Efficiency will not suffer from this.
Chemicals
Before using this or that chemical agent, it is necessary to read the instructions without fail. Before using chemicals, protect your hands and put on a mask so that you do not inhale the acids and alkalis contained in such products during the cleaning process.
Useful information: Some chemicals cannot be used to clean the toilet if you have plastic sewer pipes or local treatment plants (septic tanks) installed.
Liquid acids and alkalis
There are dozens of toilet cleaners on the market.
- Phosphoric acid (5-7%). With its help, you can not only clean the toilet, but also eliminate corrosion of the internal parts of the drain tank. Pour approximately 100 ml of the acid solution into the cistern and toilet bowl, leave for 10-20 minutes, then rinse with water and clean the surface with a ruff or brush. Orthophosphoric acid is quite cheap, but in this case the price has nothing to do with efficiency. Note that phosphoric acid does not affect rubber and plastic. It must be used with extreme caution, be sure to wear rubber gloves!
- A solution of hydrochloric acid (33%) is a very active substance that can be used to clean the toilet bowl. When working with her, you must be as careful as possible. Be sure to take care of your hands and try not to breathe fumes. It will be enough just to wipe the contaminated areas with an acid solution, and then pour one glass of liquid into the toilet. This is enough to completely clean it, just wait 20 minutes. At this time, it is advisable to cover the toilet with a lid. Please note that hydrochloric acid cannot be used if you have plastic water pipes installed. This substance is contained in the products of the brands "Cillit" and "Toilet Duck".
- Liquid battery electrolyte. As a rule, car owners use it, but sulfuric acid mixed with distilled water can also clean your toilet. Even if the raid seems "eternal". It is necessary to apply and withstand battery electrolyte according to the same rules as hydrochloric acid. This product is not suitable for regular use.
- Chlorine. Today, there are many cleaning products based on chlorine. Among them - both the usual and inexpensive whiteness, and the advertised imported "Domestos". It is important to know that drugs that contain chlorine in their composition have an extremely negative effect on health. Despite their high efficiency, it is highly undesirable to use them on a regular basis. What is the correct way to use chlorine? Apply it on dirty areas and leave it on for 40-60 minutes. Then wash the toilet with a brush and drain the water.
Useful information: Some people advise pouring "Whiteness" directly into the drain tank. This method is quite effective, but it is extremely dangerous for the female reproductive system.
- Popular cleaning products. Household chemical stores offer a huge range of products designed to combat old pollution and plaque on the toilet. They are available in the form of gels, creams or solutions. Often applied for 40-60 minutes under the rim, after which the toilet is cleaned with a brush. The procedure can be repeated several times in a row if it was not possible to immediately eliminate all contamination.
Abrasive powders
Caution: the abrasive powder may scratch the earthenware.
All abrasive cleaners that are sold in stores clean the toilet well. But small granules often leave micro-scratches on the faience coating. Because of this, limescale will soon reappear.
If there is no alternative abrasive option, use abrasive cleaners as follows: pump out all the water from the toilet bowl and pour cleaning agent into it (the exact amount is indicated in the instructions). Then leave the remedy for at least half an hour so that it begins to act. After that, start cleaning the surface. Use a brush or hard steel wool. You need to rub until the pollution is completely eliminated. Of course, this procedure is unpleasant and rather tedious.
Tank tablets
Toilet tablets perfectly disinfect it and fight plaque
Special tablets for the tank not only effectively fight plaque and urinary stone, but also disinfect the toilet bowl well. In addition, they have a pleasant smell, which can also be considered a plus. Tablets for the tank disinfect the surface of plumbing and extend its life. Buy a pack of pills and put one capsule in the bottle. After it starts to dissolve, the water in the tank will turn into the color of the tablet. This means that she began to act. As soon as the coloring pigment disappears, put a new capsule into the tank.
In addition to regular preventive cleaning, it is also necessary to adjust the pressure of the water supply to the tank. This will significantly reduce your utility bills, as well as get rid of the constant appearance of lime deposits on the toilet. The most effective way is to place several filled plastic bottles in the tank. This will help cut costs and save 2.5-3 liters of water during each use.
When buying new plumbing, give preference to toilets that have a double flush button and a water-saving mode.
If you don't feel like messing around with a dirty toilet and cleaning it yourself, call a professional cleaning company. It will cope with pollution much faster thanks to special equipment and “professional” cleaning agents.
Periodic cleaning of the toilet will not take you much time and effort, but it will help protect the toilet from contamination. It is prevention that is the best way to deal with plaque, stone and yellowness. If your toilet needs a thorough cleaning, use our tips - and it will be successful.
Plumbing is under attack. This is especially true for the toilet. The appearance of plaque, orange smudges, unpleasant "aromas" are problems that can be encountered if the plumbing is not washed in a timely manner. How to clean the toilet - consider in more detail.
Why does a urinary stone appear?
Such deposits are considered the most stable. Their appearance on the surface of sanitary ware indicates that the drain does not work or the owners forget to flush after themselves after toilet procedures. And water contains many minerals.
During operation, they interact with the urinary stone, forming a strong, hard coating of a gray-orange color. Since it is not possible to clean the toilet bowl mechanically (high risk of plumbing splitting), acid-base solutions are used to wash it.
Why is plaque formation dangerous?
The appearance of a urinary stone on plumbing over time leads to a decrease in the drain hole, which threatens to become completely clogged. Removing such a plaque will already be a whole problem, you will have to change the plumbing. It will cost much less than cleaning in several stages with different means.
You should be aware that if a urinary stone forms quickly enough, this means that the plumbing is outdated and its surface has become rough. Such sanitary ware is changed or washed more often.
Work safety
Since it is possible to clean the toilet from a urinary stone by working with acids, alkalis, protective equipment should be used. In some cases, you can get by with gloves, and when working with especially harmful substances, respirators and goggles are used. This will prevent burning the respiratory tract. Since it is possible to clean the toilet from a urinary stone at home (photo attached) using folk methods, we will start with them.
Baking soda
The powder is poured for 12 hours on the places of pollution (preferably at night). This improves the efficiency of this method. In the morning, clean with a brush and then rinse with water. If the contamination is not completely gone, then you need to repeat the procedure.
As a rule, baking soda is used with other cleaning products such as vinegar, citric acid.
Vinegar
How to clean the toilet from a urinary stone with vinegar? The most effective method would be to use a vinegar solution with baking soda. This method should be applied at night, since with heavy pollution it will take 8 hours to achieve perfect cleanliness.
A glass of vinegar is taken, heated to 40 ° C, 2 teaspoons of baking soda are added, everything is mixed until completely dissolved. The resulting solution must be applied with a brush to problem areas. Wash off with warm water after 12 hours. The greatest effect can be achieved by first pumping out the water completely from the sanitary ware and pouring more solution. Do not forget about the respiratory organs, eyes.
Lemon acid
Many housewives have come across this descaling powder.
And the question immediately arises of how to clean the toilet from urinary stone without boiling water? Everything is simple, sprinkle abundantly on the places of contamination, lower the lid, let stand for 2-4 hours, depending on the degree of contamination. Then rinse with hot water, if necessary, clean with a brush.
For greater effect, pump out water from plumbing, carefully pour boiling water. And 2-3 packets of citric acid are already added to it. Give time for a reaction, wash off in the same way as the first option.
Imported soda
Such drinks contain a large amount of citric acid. For example, Coca-Cola, Fanta, Sprite. Therefore, many housewives began to use them to clean faience, while showing their children how "useful" soda is. So how to clean the toilet from a urinary stone at home in this way? You will need 2 to 3 liters of soda. It should be poured overnight. In the morning, you will need to walk with a brush through the contaminated areas, rinse with water.
Oxalic acid
Modern housewives are unlikely to have heard of such a substance. In fact, this is one of the most effective ways. If you manage to get it, feel free to use it. How to clean the toilet with this tool?
To do this, you need to apply the granules to the places of contamination with a damp cloth or sponge, leave for 1-2 hours, depending on the degree of neglect. Next, you will need to rub with a brush, rinse with water. In this way, it is easy to restore the whiteness of plumbing.
Hydrochloric, phosphoric acid
This method is not suitable for plumbing with plastic pipes of the drain system, it will corrode. Since you will need to clean the toilet with this method using acid, you should use protective equipment: gloves, a respirator, goggles. The solution is used 33%.
The liquid is applied to the places of contamination. The reaction time is 15 minutes. After that, everything is thoroughly washed off with a brush and water. This method is very effective, but hydrochloric acid should be handled with care. Orthophosphoric acid is used in the same way.
Battery electrolyte
Few have heard that the electrolyte can be used for household chores. For example, it is suitable for solving the question of how to clean the toilet from urinary stone. A folk remedy of such a plan is quite effective. The electrolyte in its composition has hydrochloric acid, distilled water. You can buy it at any automotive store. The agent is poured into the places of contamination. After you need to wait 10-15 minutes and wash off the product with a brush, water.
Specialized funds
The household chemicals market offers a wide range of finished products for plumbing.
These reagents in their composition have various types of acids and alkalis. Consider the most popular means:
- Powders. Abrasives. Such means are used for mechanical action. Apply them with a brush or sponge. May contain chloride compounds. The most famous powders: "Pemolux", "Komet".
- Liquids. Such products are applied to the places of contamination, they are given time to react, then they are washed off. For example, "Whiteness", "Sanoks".
- Gels. These tools are more effective due to their ductility. Unlike liquid, they flow down the walls of sanitary ware more slowly, which allows them to corrode plaque as much as possible. Gels are applied under the rim of the toilet bowl. According to the instructions for use, time is given for the reaction. Then, with the help of a brush and water, they are washed off. The most famous: "Domestos", and others.
- Creams. They are applied to places of contamination, additional use of sponges with abrasive for rubbing and cleaning is possible. Give time to react, wash off. One example is Sif.
What is interesting ready-made funds? Their reaction time with plaque is 30 minutes. Therefore, their popularity is justified. But if the ready-made reagents are over, but you need to urgently clean the plumbing, then folk remedies will come to the rescue.
Either method will be more effective if all the water is removed from the toilet and the products are applied directly to the contamination.
Plaque prevention
Since cleaning the toilet from a urinary stone at home is not an easy task, it is better to carry out prevention in a timely manner. Manufacturers of household chemicals offer a wide range of such products:
- Tablets. Placed in a drain tank. Promptly wash away dirt, including under the rim. They also serve as fragrances.
- gel blocks. Mounted under the rim of sanitary ware. They also serve to prevent pollution, prevent the formation of bacteria.
You should also periodically wash the plumbing, monitor the serviceability of the drain. Leakage of water will cause the formation of plaque. And the lack of a drain will turn into a disaster for the cleanliness of the toilet.
The appearance of urinary stone and limescale is not a one-day process. It is unlikely to harm health, but it is quite likely to harm sanitary ceramics. In addition, the sight of a dirty toilet or sink can spoil the whole picture of your immaculate bathroom. Today we will tell you how to deal with the worst enemies of sanitary ware and earthenware in ordinary, home conditions.
Causes of deposits
In order to choose an effective way to deal with deposits on sanitary ceramics (faience), you first need to find out the reasons for their appearance, composition, etc. The proverb “You need to know the enemy by sight” is also relevant in our difficult task.
Plaque not only spoils the appearance, but also destroys the enamel of the plumbing device
Limescale is a deposit of minerals, which are found in excess in tap water, on the surface of ceramic and chrome products. Basically, pollution is formed in the places of flushing in the form of yellow-orange smudges. Moreover, the more often the water in the toilet is flushed, the faster the plaque forms.
Important! If plaque is not removed from the water supply nozzles in time, deposits can cause them to become clogged. Keep track of the status of each of your "home assistants".
A urinary stone is a deposit of minerals found in the human body. They are excreted along with the urine and settle on the walls of the ceramic product. Combining with the minerals contained in the water, they form a dense and very unaesthetic layer of gray-yellow color. Irregularities in the ceramic coating exacerbate and accelerate this process.
If ceramics are initially of poor quality, then plaque forms on it faster due to the porosity of the material
When choosing sanitary ceramics, check the smoothness of the inside surface of the bowl. The ideal option is to purchase a product made of sanitary porcelain, unlike cheaper faience, it has a dense structure. This is achieved due to the elevated temperature at which the product is fired. And it is the density that makes porcelain toilet bowls smoother, and plaque and stone do not so quickly eat into the structure of porcelain, so it is much easier to clean it with your hands.
It should be understood that sanitary china is a material for the manufacture of elite sanitary ware, therefore its price is much higher than that of faience models. Whether to attribute this feature to the minuses is up to each user to decide independently.
Porcelain product
The main reason for the appearance of deposits of any kind is the neglect of preventive methods for cleaning ceramics. It should be remembered that the more often the scheduled cleaning of the toilet room and the cleaning of plumbing is carried out, the longer the toilet remains in its original form.
Cleaning with improvised and folk remedies
To clean the toilet, sink or shower tray from plaque, it is not necessary to run to the store and spend money on expensive chemicals. In addition, effective substances are expensive, and you don’t want to spend money on ineffective ones. In order to save yourself from unnecessary waste, and the toilet from limescale and urinary stone, you can use improvised means that any housewife always has in her arsenal. So, several ways to clean plumbing, borrowed from the people.
Lemon acid
The main enemy of lime deposits is citric acid. It very effectively fights deposits that have not reached their critical point.
Citric acid is an excellent plaque remover
For this you need:
- purchase 3-4 sachets of the substance;
- apply to contaminated places;
- close the toilet lid;
- wait 4-5 hours (better until morning);
- rinse off the water, carefully treating with a brush.
For greater efficiency, you can repeat the procedure several times.
Acetic acid
Works the same way as lemon. But for its use, vinegar essence must be prepared:
- measure 250 g of vinegar essence or food vinegar 9%;
- heat the liquid to 45-50 ° C (be sure to cover the container with a lid to avoid a pungent vinegar smell);
- pour warm vinegar into the toilet;
When working with acetic acid, do not forget to protect the airways with a bandage.
- for efficiency, you can add a little baking soda (2-3 tsp);
- be sure to close the toilet bowl with a lid;
- leave for 2-3 hours or overnight.
In the morning, rinse the bowl thoroughly with water and rub it with a brush or other brush.
Oxalic acid
This tool is now receding into the background and comes across on store shelves less and less. But if you met it on the modern market, feel free to buy it, because it is a cheap and effective way to restore the original whiteness of your ceramics. It is necessary to apply the product on a slightly damp soft cloth or sprinkle on the places where the urinary stone and plaque are deposited. Feel sorry for the substance is not worth it. After treating mineral accumulations, clean with a brush and rinse thoroughly with clean water.
Oxalic acid will clean the surface of the toilet in a short time
Baking soda
This drug is in the kitchen of everyone. With the help of soda, you can enhance the effect of acid, acetic or citric. Soda that has fallen on contaminated areas destroys the structure of minerals and completely removes plaque from the surface of ceramic products. To clean the toilet, you will need at least 200 g (1 pack). For greater effectiveness, it is better to leave the drug to work all night. In the morning, all that remains is to brush the bowl with a brush, cleaning off the remnants of mineral deposits.
Coca Cola
No matter how strange it may sound, this wonderful drink can not only quench your thirst, but also remove old limescale. To do this, pour 1-2 liters of liquid into the bowl and leave overnight. How the cleaning properties of Cola were revealed is unknown, we can only assume that the drink was poured into the toilet by a caring mother, who later discovered that he "ate" all the deposits.
Important! Although improvised means do not have a high concentration of acids or alkalis, it is necessary to work with them with gloves. And when using vinegar, you need to take care of the respiratory tract.
Some housewives even use Cola to remove plaque.
Chemistry on guard of purity
Improvised substances can clean non-critical pollution. When lime deposits look more like a toilet bowl coating, and the formation of a urinary stone has acquired a dark brown hue, folk remedies are useless. Only heavy artillery in the form of powerful chemical cleaners can cope here.
Very important! With caustic chemicals it is necessary to work only with rubber gloves! Do not neglect safety when using!
It is best to use specialized detergents that are designed only for toilets. Be sure to read the product label before use.
After keeping the product, be sure to brush the bullshit
With critical and extremely abundant growths of mineral deposits, you can use a liquid electrolyte, which is used in car batteries. Use it only as a last resort, when other means have not brought results. It contains sulfuric acid in its composition, so do not forget to take care of your own safety.
Preventive control measures
Everyone knows that it is much easier to prevent the appearance of pollution than to look for means to combat it. In order to prevent the spread of deposits of lime and urinary stone, you need to use a few tips:
If the toilet is kept clean, there will be no need to use caustic chemicals. With proper care, your ceramics will shine clean for a long time.
How to wash the toilet from plaque and rust: video
How to remove plaque: photo
In the absence of regular care of the toilet, a layer of urinary stone gradually appears on its inside. Of course, the best way to solve a problem is to prevent it, but in some cases a person is "faced with the fact." How to clean this faience friend inside? Let's look at a few common ways.
Reasons for the appearance
Urinary stone is a build-up of minerals that get on the walls of the toilet along with urine, settling on them with insufficient flushing. Most often, it appears under the rim of the toilet bowl and in the place of stagnant water.
The sooner you start to deal with this unpleasant raid, the greater the likelihood of "victory"
The main reasons for its occurrence:
- young children in the family who often forget to flush after using the toilet;
- faulty tank;
- defects in the surface of the toilet, delaying the urinary stone;
- deterioration of plumbing with the accompanying roughness of its walls.
Ways to clean the toilet
With a strong coating, the product will most likely have to be applied more than once, coping with “stone deposits” layer by layer To remove this plaque from the surface of the toilet, the following means are suitable:
- Soda. It is desirable to give preference to caustic, but in a critical situation, even ordinary food can be used. It is applied with a cleaning sponge, after which it must be left there for 5–10 hours - preferably overnight - and washed off by brushing. When using caustic, gloves are required to avoid burns.
- Bura. It is enough to pour one cup of powder inside, then close the lid for several hours. Again, it is best to leave the substance overnight and brush or brush before flushing.
- Vitamin C. A very popular folk recipe that involves the use of two large tablets of vitamin C. The actions with them are the same: at night in the toilet - cleaning - flushing.
- Hydrogen peroxide. It is often used in a mixture with ammonia, but this method has a significant drawback - the need to apply a cleaning agent with a sponge. Subsequently, the lime layer will have to be removed by supplying large amounts of water.
- White. A common remedy, which is also poured onto a contaminated surface, left there until the morning and washed off. It is better not to apply whiteness to plastic elements - it can damage them.
- In especially "severe" cases, the use of hydrochloric acid, which dissolves very thick layers of plaque, will help. Gloves and a respirator mask are required here, plus it is worthwhile to close the toilet for the period of its operation and turn on the hood in it before the final flushing / cleaning, since breathing acid fumes is far from the most useful thing in life.
Prevention
To succeed in this field, it is important to follow a number of rules:
Sometimes brushing is not enough, especially in places where the cleaner is washed away by water and you have to use your hands and an abrasive sponge. - Cleaning frequency. Clean the surface of the toilet regularly - and at least once a week. It is not necessary to leave the selected remedy for a long time: half an hour is enough for prevention.
- Tank. The amount of urinary stone depends on the volume of water leaving the sewer system. It is important that the tank does not leak, and the float does not “move out” to the side. In extreme cases, you can put a few plastic bottles in the tank, filling them with sand: this will reduce the amount of incoming water.
- Water softening tablets that reduce the amount of urinary stone formation. They are placed in a tank and provide a light coloring and aromatization of water.
Lime deposits form on the surface of any plumbing fixtures, with which you constantly have to fight. The toilet bowl, in addition to limescale, also pleases us with the appearance of urinary stone on the walls over time. And the hostess is faced with the question: how to clean the toilet from limescale and urinary stone? The task, it would seem, is not an easy one. But in our age of scientific progress, there are many ways to get rid of these malignant misfortunes. Let's take a closer look at the ways in which you can return our toilet bowl to its former whiteness.
Causes of urinary stone formation
We all know that limescale appears as a result of the deposition of minerals contained in our water. But not everyone knows what a urinary stone is and where this attack comes from. Such plaque is essentially the interaction of the same minerals from the water with minerals that are excreted in the urine. As a result of their interaction, a dense gray-yellow coating is formed, which housewives do not like so much.
Let's look at the reasons why it begins to grow rapidly and bring inexperienced housewives to nervous spasms:
- Very often this can be seen in a house where there are small children who do not remember what needs to be drained behind them. That is, the main reason for the occurrence of a urinary stone is untimely or insufficient draining. In this case, mineral deposits from the urine settle on the walls of the toilet and remain there.
- Such a problem can occur if the drain tank is malfunctioning.
- If you have a toilet bowl with a rough surface or an old toilet bowl at home, then the likelihood of a raid increases many times over.
Important! The urinary stone grows and enlarges over time, therefore, at the first signs of its appearance, you need to “take the bull by the horns”, or rather, begin to fight it immediately.
How to wash the toilet from urinary stone at home? How to do this - we will tell you now.
Dealing with urinary stone
How to clean the toilet from urinary stone at home? The easiest way to get rid of this scourge is to use household chemicals.
Special household chemicals
Find the right toilet cleaner. This can be done by examining the labels or by consulting with the seller.
Important! Don't forget that you will also need gloves and a respirator. But children and allergy sufferers need to be evacuated at this time.
Operating procedure:
- For the best effect, you need to drain the water from the toilet. This can be done with a mug or in any other way convenient for you.
- Now you need to put on uniforms - gloves and a respirator.
Important! You don't have to, of course, but most chemicals are very aggressive and can get you into a lot of trouble when working in a small space with bare hands.
- The remedy of your choice should be applied to the places where the urinary stone appeared and left for several hours.
Important! During this time, you can not use the toilet.
- When enough time has passed, rub the treated areas with a brush.
Important! Do not use metal brushes. They can scratch the surface of plumbing, as a result, plaque will form even faster.
If the layer of plaque was thick, then you are unlikely to be able to get rid of it on the first try, but several repeated procedures will do their job and help to cope with the problem.
In addition to various popular toilet cleaners, there are other ways to clean the toilet from lime deposits and urinary stone using chemistry.
How else can you remove a urinary stone in the toilet?
Bleach
You can buy a bag of bleach, pour it down the toilet and leave it overnight. This will destroy the stone and kill the bacteria. And yes, it will cost you less.
Anticalc
This tool will cope with any plaque. Pour it into the toilet and leave it overnight, and in the morning remove the remaining dirt with a brush.
Oxalic acid
Oxalic acid copes very well with similar problems. It is crystals. They can simply be poured dry on problem areas or diluted with water or alcohol.
Hydrochloric acid
A very good remedy is a 33% hydrochloric acid solution. But this requires great care - the product is toxic, it is necessary to protect hands, respiratory organs.
Wipe the walls, pour a glass of product into the toilet bowl, and you will quickly get rid of all kinds of dirt in 15 minutes. At this time, the toilet lid must be closed.
Important! Do not use this tool if the toilet is connected with plastic pipes.
Liquid battery electrolyte
This method can be used in rare cases - this powerful tool will perfectly clean your toilet from any plaque, because sulfuric acid is included in the composition.
Tank tablets
How to wash the toilet from stone and plaque? On sale there are special tablets for the tank, which are suitable both for the fight against urinary stone and limescale, and for prevention. It is enough just to put one tablet in the tank. The water will turn into any color.
Important! This tool disinfects and disinfects the surface of the toilet bowl, extending its service life. In addition, it usually has a pleasant aroma.
Cleaning folk methods
In the fight against urinary stone, all means are good, and especially folk methods, because they have been tested for more than one year. Remember to protect your hands and respiratory organs and protect your eyes from splashes when using any of the following:
- In the fight against urinary stone, table vinegar will help you. It will soften any deposits on your plumbing. Before applying it to problem areas, pump out the water from the toilet and wipe the inside with a dry cloth. Leave for 2-6 hours and then brush with a brush, not a metal one. This cleaning can be repeated several times until the toilet is completely clean.
- If just vinegar did not help, then mix it with baking soda - for 200 grams of vinegar there is one tablespoon of soda, or with iodine in a ratio of 1 to 1, and heat up to 50 degrees.
- How to remove a urinary stone in the toilet? One of the simplest and most affordable remedies is citric acid. A few sachets of this remedy per night can dissolve any plaque. Moreover, the procedure can be repeated several times until the problem is completely solved.
- Help to cope with the problem and baking soda, generously sprinkled on places with deposits. They also fall asleep at night and leave it, and in the morning they clean it along with the remnants of plaque. For greater efficiency, any cleaning agent can be added to soda.
- As a last resort, you can try the power of Sprite or Coca-Cola. They contain a lot of citric acid, which will dissolve plaque. You will need 2-3 liter bottles, which will have to be poured into the toilet.
Prevention measures
To avoid such serious problems, you need to take preventive measures and not bring your toilet to the point where it has to be cleaned with hydrochloric or sulfuric acid. Urinary stone appears gradually and grows on running plumbing. Therefore, we take preventive measures:
- Periodically clean the toilet bowl with special means. Any product, especially chlorine-containing, will cope with small pollution.
- Make sure your tank is not leaking. If it is faulty and flows all the time, this leads to the formation of plaque. Especially in areas with hard water.
- An excellent prevention will be special plates that are attached to the walls of the toilet. They clean the surface with every flush.
- Urinary stone forms faster on rough surfaces, so do not pour hot waste into the toilet so that microcracks do not form.
- If you have a very old damaged toilet, then the problem will not be solved so simply, you need to buy a new one with a glossy surface.
