Barbed wire fences. How to fix barbed wire so that it does not sag Wire fence

One of the most important functions of the fence is to protect the territory from uninvited guests. If high and strong more or less difficult to penetrate the site, then a thorny fence is a more reliable guard of private property. Sharp clinging spikes and edges can become a serious obstacle even on a low and dilapidated fence.

Classic barbed wire fence and log posts

To date, the effectiveness of a barbed fence, combined with ease of installation, allows it to be successfully used to mark the boundaries of the following objects:


Egoza barbed tape

Since its inception, barbed wire has undergone changes, its strength and barrier functions have been increasingly improved. The traditional barbed fence with spikes made of pointed wire is known to everyone.

Today, barbed tapes cut from a steel strip are considered more reliable and efficient.

Galvanized wire with cutting blades is difficult to overcome even with special tools. In terms of strength and durability, Egoza barbed tape is many times superior to its counterparts.

Flat Barbed Wire Barriers

A barbed fence can be made from prefabricated sheets made of galvanized barbed tape. Made in the form of a spiral or flat fences, they have excellent barrier functions and have a modern aesthetic look. They produce flat barriers by connecting reinforced barbed or twisted tape with special galvanized brackets.

Spiral Bruno

The most reliable option is a fence made of spiral barbed tape. The three-dimensional structure, consisting of galvanized wire and cutting tape, was called Bruno's spiral. The spiral barrier is available in different diameters, from 45 to 90 cm. In some cases, the diameter can be individual, depending on the needs of the customer. The installation of the barrier is carried out along the fence or on the ground. In turn, a spiral barbed wire is installed along the fence:

Installation of a protective barrier from Bruno's spiral

  • In one or two rows;
  • With a slope, to complicate the penetration into the territory;
  • Additionally from the bottom on the outside.

On the ground, the barrier is placed in various ways:

  • Free-lying - in one row or in several;
  • In the form of a pyramid;
  • On supporting pillars - in two or three rows.

Brackets for barbed wire

Barbed wire can be fastened in different ways, for this various bracket configurations are used, which are bolted or welded to the fence posts.

Barbed or spiral tape can be installed on the following mounts:

  • On a straight bracket, the spiral is fixed to the brackets, and the wire is stretched in several rows between the fasteners;
  • On the L-shaped bracket, located with an inclination - to enhance the protective properties of the fence;
  • Y and U-brackets allow you to install spiral structures in a variety of ways.

An economical fence for a summer residence is built when the fence is temporary or in order to save the family budget. However, one should not think that if little funds are allocated for the structure, it will become unusable after a while. On the contrary, there are fencing options that do not require special capital investments and at the same time, for several years, or even decades, will reliably protect your territory. Consider some of these examples taken from observations of the real life of summer residents.

Content

Wooden fences.
Chain link fences.
Wire fences.
Fences from improvised means.

wooden fences

Wooden fences, that is, fences made of picket fence or not edged boards, are a budget option for fencing that can be built in the shortest possible time with minimal cash costs. The corresponding material is not in short supply in warehouses, so it can be purchased at any time and inexpensively.

The only thing you need to pay attention to is the installation of the posts and the lag attached to them. Pillars (racks) under the fence are best constructed from: a round pipe, a square pipe, a channel N 8–10 or a corner 63 x63 (70 x 70). They are better concreted and withstand heavy loads.

Chain link fences

If you already have reliable drains for the fence, you can replace the wooden filling with a chain-link mesh. The mesh is sold in hardware stores in the form of rolls about 10 m long and 1.5 m high. The cell (square) of the mesh can be different: 20 x 20 mm, 35 x35 mm, 45 x 45 mm or 50 x 50 mm.


To fill the space between the posts, the mesh is untwisted to the appropriate size and welded to the poles (metal) using electric welding. The fence option does not require a lot of time or money. And if you paint the mesh in the color you need, you will get a beautiful and durable fence.

Wire fencing

What is wire fencing? This is a type of economical fence for giving when a picket fence, edged board or chain-link mesh is replaced with wire Ø 3.0 or 3.5 mm. The design is suitable for both wooden racks and metal ones. But it is better for wooden ones, since nails of 100, 150 mm in size are hammered into the poles and wire is manually attached to them.

The options for fastening the wire between the posts can be different: longitudinal fastening, from corner to corner in combination with longitudinal, etc. It is quite clear that such a fence is purely symbolic, since it only protects your territory from stray dogs, nevertheless it not so rare in dacha cooperatives.

Fences from improvised means

Fences from improvised means open up wide opportunities for individual creativity.

What can you not see in summer cottages! These are fences from wicker branches, concreted glass bottles, plastic bottles smeared with clay, fences from car tires and even from used old skis. In a word, whoever can get what he does.

Special attention is paid to economical fences for cottages made of hedges. You can plant a shrub and cut it evenly, plant flowers, lilacs, etc. A hedge is beautiful, but it requires constant care: after all, it is alive and needs to be watered, cut, pushed, etc.

As an inclusive, you can find a sunflower hedge. And it looks exotic and well closes your yard from prying eyes. Moreover, the sunflower can be left for the next season by cutting it along the cord to the same height.

To fence off the territory against unauthorized entry is necessary. But sometimes the area is very large, and making a capital barrier becomes a costly affair. Moreover, a beautiful fence will not always be a serious obstacle to intruders.

If desired, attackers will climb over it. Or, there is no need for beauty at all, but it is only necessary to create a difficult obstacle. For example, in industrial or agricultural areas, it is only required to provide protection from entering the protected object. A barbed wire fence is a suitable option in this case.

Design features

Barbed wire is a metal thread or a narrow strip with barbs attached to it. The wire is produced in several configurations. The material is used both for the construction of a full-fledged barrier, and for an additional obstacle on an already installed fence of any kind.

The thorn is used both for fencing private houses and for protecting industrial facilities.

Initially, the design was invented to protect the territory against animals, and was often used in cattle breeding.

Such a wire fence does not allow painless access to the fenced area, as the thorns cling to contact, which leads to large scratches and injuries to the body. Later, the technology began to be used for fencing against people. The advantages of the design are its low cost, practicality and the ability to install a fence with your own hands.

Types of barbed wire

Barbed wire is made by cold drawing and subsequent winding of sharp parts - spikes. More often, the cross-sectional shape of the spine is round. The diameter and stiffness are different. There is a soft wire that is easy to install.

The other option is a stiffer material that is harder to work with but more reliable. Production is carried out on special machinery. Steel is used for manufacturing.

The most common design option is a single or two-core thread, on which short pieces of wire with pointed ends are wound. The wire is made galvanized or uncoated.

The tape thorn is knocked out in the form of a long metal tape with protruding spikes in the form of a pyramid. This tape is wound on a solid base. By itself, it is quite soft, it can be cut with scissors for metal. Even when used on solid bases, it can be removed, which reduces the reliability of the fence. Therefore, most often the tape is used on a solid basis - a steel core. A simple option is the usual upholstery.

The disadvantage is that you can separate the thorn from the steel core. A more reliable option is to crimp the tape around the core. In this case, the structure is very difficult to separate, and the steel core does not allow cutting the barbed wire fence.

The last option is known as "Egoza". The 0.6 mm thick tape is made of steel with a small amount of carbon in the composition. It has a zinc coating. The protrusions on it are very sharp and tenacious. The core is a spring carbon steel wire with a diameter of 2.5 mm. Has high strength. Also has a zinc coating.

Mounting methods

Barbed wire installation is carried out in various ways:


  • On top of an already installed fence. The main fence can be made of any material: brick, wood, metal sheets, concrete slabs. The wire at the top creates an additional barrier to trespassers. Today, egoza is more often installed. The thorn is mounted on brackets of various options.
  • On the roof or around the roof. The wire is attached either to brackets or to additional metal strings.
  • A continuous protective sheet is created. Barbed wire is attached between adjacent posts. Poles are made from different materials, most often from metal or wood. The fence is made flat or voluminous. Such a wire fence is not inferior in its functionality to any other fence.

Despite the fact that the installation of barbed wire can be done independently, this work requires the utmost care and attention, otherwise you can get serious damage. To install the fence, you will need mounting pliers and durable leather or canvas overalls.

Flat canvas

The canvas is made from fiddle. It consists of coils fastened together with staples. Each subsequent turn is shifted relative to the previous one by a certain value. Such a barbed wire canvas has an acceptable aesthetic appearance. Therefore, it is used in the city or in the private sector. It is slightly inferior to the spiral design in protective qualities, but at the same time, it is cheaper and more compact.

Barbed spiral fence

In addition to a flat canvas, volumetric structures are also made - egoza spirals. The fencing of this design is made in the form of coils of barbed wire connected to each other by small brackets. Staples are attached in a checkerboard pattern. Egoza diameter 450 mm - the most common option for fencing. The volumetric form is an impenetrable barrier. Spirals spring and do not give in to squeezing.

Fence

The fence is a weave of barbed wire, stretched over poles. It can be flat or voluminous, depending on the type of spine used. With a good frame, the fence turns out to be quite durable, despite its apparent simplicity. In addition, it provides unhindered penetration of sunlight.

Installation

There is no need for a foundation to build a fence. It is only necessary. They are made of concrete, metal or wood. The distance between the pillars is from 2 to 3 m. The supports are driven into the ground or concreted. The latter option is more reliable and durable.

In the first case, wells are drilled approximately a meter deep and with a diameter smaller than the cross-sectional area of ​​the pillars. Then the supports are driven in with a sledgehammer. Or a recess is made with a shovel. In the second case, a well is also drilled, but its diameter in the upper part by half the depth should be 15–20 cm larger than the cross-sectional area of ​​\u200b\u200bthe support. Then the support is hammered into it. The upper part is filled with concrete with filler.

The scheme for attaching barbed wire is quite simple. Next, you need to stretch the wire between the posts, so that it does not sag. Either a construction is made of several parallel threads, or a canvas is made, consisting of diamond-shaped cells fastened together with staples.

Have you noticed that all the houses in United States often they don’t fence at all - the house stands in the middle of a green lawn, and that’s it. From the house through the lawn there is an asphalt path to the main sidewalk, on the side there is an asphalted entrance to the garage.

We cannot yet boast of such openness and we will definitely put a fence around the house. If, however, this desire to be closer to the world still sits in the soul, “to take a chance and leave the ignition key in the car,” then you can try to install a fence made of wire structures. And protection, and everything is visible, and elegant.

As a matter of fact, it’s probably not worth it to grumble so much at these wire fences, they can also carry a very useful function:

  • Firstly, after all, for the protection of personal territory.
  • Secondly, for fencing playgrounds, when you can easily see from the outside what is happening inside.
  • Thirdly, to protect the dog walking area. This is not even for their own protection, but for the protection of others.
  • Fourthly, for the fencing of the territory, the monitoring of which, nevertheless, must be carried out from the outside. A good example here is all kinds of sports grounds, primarily football and tennis.
  • Fifth, to protect already animals. Kilometers of such fences can be seen along the roads in the Alps in Germany, Switzerland, Austria and France. This prevents wild animals from entering the roadway, and avoiding collisions in these situations is a win-win for both humans and animals.
  • Well, and sixthly, wire fences have long been persistently and successfully used to protect special military facilities.

Such a widespread use of this type of fence is due to several factors:

  • The wire is quite cheap, so the cost of erected fences can be an order of magnitude lower than that of ordinary stone or using corrugated board.
  • Wire structures are much lighter than any others used in the "fence art", and this leads to a significant acceleration of all work.
  • The very nature of the work on the construction of such fences is also simpler, and again a significant gain in speed.

Useful advice! If you are really limited in time and the speed of construction is the most important factor for you, you can choose a very simple technology - metal or concrete pillars driven into the ground and a chain-link mesh stretched between them. In this situation, choose special wire poles that already have the necessary mounting holes. In the case of choosing wooden poles, the mounting brackets will have to be mounted by hand.

Possible options

In addition to the above option - driven poles and a grid between them, there are others:

  • Similar to the simple one above, all the same pillars, but the net opening down is pulled over a cable running about 10-15 from the top of the pillars.
  • You can use ready-made mesh structures, put on an external metal frame. Very often, such structures are welded to the poles on the left and right, otherwise the installation of the grid will be preceded by the installation of poles for it.
  • You can also build a barbed wire fence. Maybe you do not want to liken your living area to the barracks and such a fence is not for you. But for guaranteed protection against unwanted penetration into a protected area for special purposes, barbed wire in bays will be good. Here one cannot even say that it will take a day to create such a fence - it will take no more than 2-3 hours if the columns are prepared in advance.

Work progress

Here is the progress of all work on the creation, perhaps the most time-consuming fence using wire - the tension between the posts:

  • First, the pillars are installed. Keep a few things in mind here:
  • If you have metal driven ones at your disposal, then you free yourself from the need to dig a hole under the post and perform concrete work. Otherwise, this work comes to the fore.
  • The distance between the wire posts is no more than 2.5 meters.
  • If you have chosen specifically for the tension of the wire, then correctly orient them for the upper cable. This cable will be the mounting base of the upper edge of the mesh. The correct orientation should be prompted by the installation instructions for such pillars.

  • Usually, such fences are not equipped with a concrete parapet from below, but if you make a fence “for yourself”, the parapet will be an additional plus in the opinion of others about you. For a concrete parapet, you will also have to lay and concrete a ditch between the pillars.
  • The depth of the pit for wire posts is 70-80 cm, under the ditch between them is up to 40 cm. But here you need to take into account your region. In the northern regions, it is necessary to take into account the depth of soil freezing. If the freezing depth is 1 meter, then you will have to make holes 20-30 cm deeper.

  • The mesh will be stretched between the posts, so the two outermost posts will experience a perceived pull inward. Therefore, it is highly desirable to equip these two posts at the bottom with retaining posts from the side of the fence line.
  • When installed, logs are screwed into the extreme posts and the lugs of the upper cable are threaded into them. The tension of the cable is regulated by the correct selection of its length and the screwed-in lags themselves - the deeper the lag enters the post, the stronger the tension.
  • As a final chord, the upper edge of the expanded wire mesh is attached to the cable. This is where pliers come in handy.

Useful advice! Working with wire requires great care. Always do this with proper gloves. Be extremely careful when working with barbed wire. Seemingly minor damage caused by accidental contact with the ends of the wire is very painful, unlike other trifling cuts, it takes a long time to heal, and most importantly, it can become a source of much more serious trouble as a result of decay.

Electricity and wire fence construction

Mankind has long ago solved this problem - how to ensure a complete overview of the territory from all sides and in no case prevent penetration into it. The solution was to use electricity.

How to make a fence under tension, and even on your own - is quite simple. A battery, securely sheltered from the weather and a long wire stretched from one battery terminal to another, but through the entire perimeter of the fence, back and forth. The solution is simple, but in the style of the hero Yevgeny Mironov from Beware of the Car, who set a trap for a thief.

Think carefully if you disrespect the world around you enough to protect yourself from it with electric current. In any case, it is necessary to strictly observe safety precautions. Be sure to hang warning signs on both sides of such “personal protection” that the fence is energized, and the more often, the better.

Be sure to check the voltage level from time to time. You must understand that you are legally responsible for the harm that such an electric fence can bring to others.

Podberyozovikov was right, you should not put "traps" on people. But for animals, perhaps electricity will be useful. A very popular type of fence is the electronic fence for dogs. There are several options for such equipment of fences, which even include the installation of warning zones for approaching the fence, the impact zone and its level.

The use of such fences requires careful and patient training of dogs for it and, without fail, the equipment of the fence along the entire perimeter with warning signs.

Before making a decision

Before you decide to use wire to protect your territory instead of a capital stone fence, carefully read all the photo materials available to you. Watch the video in this article carefully. Among the many proposals, you will surely be able to choose the option that allows you to combine the useful and the necessary - to use a lightweight, quickly erected structure with maximum reliability and excellent protective properties.

You should not start work until you are firmly convinced of the correctness of the decisions made. It cannot be said that the price of a mistake will be high, which is what the wire is famous for. But a lot of hope will be wasted.

Application Formation

Ordering and payment

Manufacturing

Shipment and delivery


Perimeter solutions plant "Egoza" offers individuals and legal entities to order a fence made of barbed wire. We guarantee low prices and high quality products. Fences made of our material will last at least 50 years. Fences are a functional and inexpensive solution that protects the site from the penetration of people, wild animals, and livestock from outside. Easy installation also speaks in favor of such a barrier.

Features and Specifications

The protective part is brightened or galvanized barbed wire (GOST 285-69) with a diameter of 2.5 mm, with spikes wound every 75 mm. The spatial arrangement of the spikes makes it impossible to easily penetrate the stretched lines.


The main characteristics include:

  • strength - low-carbon steel is used for manufacturing;
  • corrosion resistance - galvanizing prevents chemical processes of destruction of the alloy;
  • good flexibility - it is almost impossible to break the wire by hand in a bend.

Important. Galvanized material lasts much longer than ferrous metal. In the latter case, the absence of a protective layer reduces the service life.

The use of barbed barriers is most rational:

  • when arranging pastures and pens for livestock;
  • for fencing private land;
  • to organize the protection of territories with industrial facilities located on them.

In fact, any obstacle or area can be fenced in this way.

How much does it cost to put up a barbed wire fence


The cost of building a fence consists of the cost of buying wire, including support poles, and paying for work.

The calculation of the amount of material is based on:

  • the perimeter of the site - the larger it is, the more products will be needed;
  • fencing type - protection tension along the top of the existing fence in 2-4 lines or complete overlap from ground level;
  • the frequency of the arrangement of individual lines, including straight and diagonal.

The cost of paying for the installer team that will be involved in the installation directly depends on the amount of work.

Offer from our company

In our company, you can profitably buy the required amount of protective materials for the construction of perimeter fences. Let's make to order and we will deliver to object the necessary volume of production.

Products are produced in coils weighing 35 kilograms, convenient packaging does not require the use of heavy equipment during work or unloading. Deliveries without intermediaries directly from the manufacturer, so that buyers have the opportunity to purchase goods at extremely low prices. Products are delivered to the customer by our own transport or with the help of transport companies in Moscow, Yekaterinburg, Chelyabinsk, Miass, Ufa, St. Petersburg and other regions.

Egoza is a well-known and recognizable trademark among professionals involved in perimeter fencing.