Toilet cistern installation
from 500 rubles!
Master will arrive within
1 o'clock or convenient time!
and get 10% discount
for future work!
A cistern is an integral part of the toilet bowl in which water for flushing is accumulated. This plumbing design consists of a tank and systems for supplying and draining water. Depending on the location of the cisterns, they can be suspended or form a single unit with the toilet bowl. According to the type of trigger mechanism, the tanks are divided into push-button and lever.
The Domashniye Masters company provides installation and repair of all types of toilet bowls in Moscow. We work professionally, promptly and efficiently and give a guarantee for the uninterrupted operation of the plumbing equipment installed by us.
Installing a cistern on a toilet
The process of installing a drain tank consists of the following steps:
- reinforcement assembly;
- fittings installation;
- fixing the tank with fittings on the toilet shelf;
- water connections.
- depressurization;
- overspending of water;
- tank overflow;
- damage to the bowl and fittings;
- increase or decrease in flow power;
- violation of flow interrupt regulation,
- system breaks.
The specialists of the company "Home Masters" will install the drain tank according to all the rules, taking into account all the subtleties of flow adjustment. Our masters guarantee reliable sealing and safety from flooding of any type of drain tank installed by them.
Repair of a toilet cistern with a button
Toilet flush cisterns with a button are the most common plumbing design that provides:
- economical water consumption;
- adjustment of the volume of supply and discharge;
- silent water supply.
The operation of the mechanism is started by pressing a button. There are models with two buttons - for different volumes of water drainage.
The flush tank mechanism with a button of any design and with any supply requires repair if:
- water stopped flowing;
- water constantly flows into the tank, but does not flow into the toilet;
- water constantly flows into the toilet;
- when you press the button, the water does not descend;
- leak found anywhere.
In case of any malfunction, call specialists. Trying to repair it yourself may result in the tank overflowing or water leaking out of the system.
Replacing fittings in the toilet cistern
The fittings of the toilet cistern of any design consists of a float, a drain mechanism (siphon) and a lever that regulates the jet. From 
fittings depends on the uninterrupted cycle of the toilet without overflows, with an economical supply and discharge of water. If the toilet malfunctions caused by valve malfunctions cannot be eliminated, it must be urgently changed. Entrust the replacement to our masters. They will properly turn off the water, dismantle the old equipment and, in accordance with all the rules for servicing plumbing fixtures, and replace the fittings in the toilet cistern.
toilet cistern repair prices
The cost of replacing the toilet cistern is from 500 rubles, shutoff valves from 200 rubles per unit. Prices for equipment repair are determined in each case individually, depending on the scale of the breakdown and the complexity of the measures to eliminate it.
