A water aerator is a small device presented in the form
The need to use
This design must be fixed on the spout of the mixer, it is intended for mixing the flow of water with air masses. This approach allows you to limit the intensity of the flow, while for the consumer it will remain invisible. Many home craftsmen dismantle the device described, believing that this device is an analogue of a coarse filter. Even if a good one is installed in the house, you should not refuse to use an aerator that can limit the passage of water. It is worth considering that, in addition to saving, using an aerator, you can achieve water purification from salts and sand particles.
Water saver functions
If you decide to purchase a water aerator, then, first of all, you need to familiarize yourself with the main purpose of this design and its device. Along the perimeter of the device there are small holes through which air enters to mix with water. As a result, water comes out of the central part of the device, which is saturated with air bubbles. The main purpose of the aerator is the normalization of the flow.
How to determine the correct operation of the device
In order to understand whether the water aerator is working correctly, you should pay attention to the jet, which should have a milky tint, be soft and foamy. After the jet hits the object, there is no huge amount of spray that could scatter in different directions. The subject is under the stream. According to the hostess, it is very convenient for washing kitchen utensils and crockery. At the same time, the flow of water is sufficient to rid the surface of objects from dishwashing detergents. A water aerator saturates the flow with oxygen, this contributes to the weathering of chlorine compounds. With the help of this device, it is possible to improve the quality of water. Aeration helps to increase the volume of the jet due to air, due to the mixing of bubbles, but the pressure remains unchanged, while the water flow is significantly reduced. Thus, without an aerator, the flow rate from the tap can reach 15 liters in one minute, the nozzle allows you to reduce it by 2 times.
Additional Benefits
Water saving faucet aerator is very popular among consumers today. If we consider its additional advantages, then we can distinguish a lower noise level during use, since water mixed with air does not make noise. In the store, such a device can be purchased at an affordable cost, which can vary from 2 to 10 dollars. Each user will be able to not only install, but also dismantle the device, this also applies to maintenance, which is simple. The main advantage is the possibility of saving water, which is important for modern meter owners.
For reference
The water aerator nozzle has one drawback, which is expressed in the fragility of the device. Thus, after the acquisition, the device requires replacement once a year, but if the plumbing system is based on old pipes, then the purchase of a new device will have to be done once every six months. It is important to remember that the aerator not only creates a highly efficient jet, but also helps to reduce consumption by improving water quality. This indicates that the consumer will be interested not to remove the device, but to monitor the correct operation of the device. Thus, maintenance will involve periodic cleaning and replacement of the filter.
Aerator device
If you decide to install a water saver - an aerator, then you should first familiarize yourself with its device. The design consists of a housing, a silicone or rubber gasket, as well as a module with a filter system, which is made of plastic. Grids with cells are stacked one on top of the other into a cylindrical module. The first and second grids are designed to direct the jet of water, carrying out cleaning, as for the rest, they are necessary to mix air into the water.
Material for the manufacture of the aerator
Before purchasing a water aerator for a faucet, it is recommended that you familiarize yourself with the material that can form the basis of the design. If we are talking about metal, then you can count on the most inexpensive devices. For this reason, they are the most popular. The disadvantage is the rapid destruction of the product from the effects of impurities and water. Among other things, the device will corrode during operation, and you may encounter rust, which sometimes even leads to the formation of holes. The device can be based on a polymer material, its advantages include excellent quality and affordable cost. The material perfectly withstands the destructive effects of water. On sale you can find products of different designs, which can be tunnel and the simplest, presented in the form of dividers. The aerator on the faucet to save water can be made of non-ferrous metals like bronze or brass, as well as ceramics. Such devices are the most expensive, but you can count on high quality and a long service life.
Varieties of modern water savers
Having visited the store, you can see a wide range of aerators, modern ones are distinguished by very original design features and have unique functions. If we are talking about vacuum devices, then they work on the principle of compressing water with the help of At the same time, high pressure acts on the flow, this is how aeration is provided. In the end, the user gets a powerful jet at the outlet, as well as an insignificant water consumption, which can be as little as 1.1 liters per minute. Quite often, recently, modern consumers have installed water aerators on faucets, they can be rotary or adjustable. With the help of such a device, you will have the opportunity to change the flow strength using one of two modes, namely spray or jet.
If you want to diversify the interior of the kitchen, then you can choose a backlit aerator that will color the stream depending on the temperature in different shades. Thus, if the temperature does not reach 29 degrees, it will be green, if the temperature level rises to 30-38 degrees, then the water will be colored blue. The flow will be red if the temperature rises above 39 degrees. It is important to consider that such illuminated devices do not at all require the use of electric power sources, since they work by rotating their turbine. You need to connect the device to the tap, setting it as a regular saver, while using additional tools is not required, you will need to screw the device manually. It is possible not only to highlight the flow, but also to maintain a certain temperature. For this, it is applied
Water aerators, reviews of which are the most positive, will perform their functions efficiently if they are technically sound. Under the influence of water, the grids are covered with elements of salts, iron oxide and other particles. Ultimately, this leads to the fact that the device ceases to perform its functions properly. If this happens, then you will see that the water pressure will be weak, the hissing sound of the stream will disappear.
To clean the aerator, you need to dismantle it using a locksmith key or pliers. On the head of the device there are two faces that are opposite. The aerator must be captured with a key over the edges by turning clockwise. Sometimes it is possible to remove the aerator manually, but if you have not done processing for a long time, then this can be difficult. The rubber gasket must be removed and its condition assessed. Removed filters must be cleaned with a needle or a thin awl. If indelible deposits have formed on the parts and holes, then a chemical cleaning method can be used. In many cases it is the only correct one.
