To save money on utility bills and to reduce water consumption, today they began to produce special devices called aerators. These devices are a nozzle that should be located on the mixer. An additional feature of this unit is that it fills the water jet with air, this makes the flow more pleasant and soft, and also helps to free the water from chlorine.
Aerator characteristics
The aerator for saving water consists of the following components:
- cover fee;
- mesh plate;
- spring;
- outer and inner case;
- screw.
The first element is used to restrict the flow of water. As for the plate, it saturates the flow with oxygen. The spring is necessary to adjust the flow rate and is available only in those devices that are supplemented with this functionality. The aerator for saving water has two housings at once, which are necessary to accommodate the internal elements. Separate nodes in the structure are connected with a screw. In order to seal the connection of devices with a mixer, a rubber gasket is provided.
Description of the aerator
The water saving aerator works on the principle of pressure difference. When the liquid passes through the cover plate, a high pressure is generated, which is corrected by the holes located on the mesh plate. A vacuum is formed in the lower part of the grid, it is filled with air entering through the side walls of the aerator. Water is mixed with oxygen, and a mixture of water and air comes out of the tap. The aerator for saving water provides a reduction in consumption due to the formation of the described mixture, which is obtained in a ratio of 1 to 3.
Reviews about the choice
According to users, to select an aerator, you need to know several parameters, among them:
- type of device;
- additional characteristics;
- material for manufacturing.
It is now possible to purchase aerators that can be installed in a sink or bath faucet. The device may be stationary. Such a device is complemented by all modern mixers. It works in the set mode. You will have to pay quite a bit for such a unit, and its average cost varies from 250 to 350 rubles.
The aerator to save water, according to users, can also be adjustable, that is, movable. Devices of this type allow you to choose the desired pressure and method of supply. Consumers emphasize that they will have to pay a little more for such equipment - from 350 to 500 rubles. You can regulate the water pressure due to the sealing ring, which is sometimes replaced by a spring. If the flow of water has become too intense, then the spring is deformed, blocking the flow of water.
Feedback on water supply methods and additional functionality
A faucet aerator, as buyers emphasize, should have two ways of supplying water, which comes in the form of a shower or a single jet. Depending on which model you have in front of you, the economy can be rotary, have a special switch or move back and forth.
Buyers like that the faucet aerator can have a special temperature sensor, sometimes the device is completely supplemented with built-in LEDs. Depending on what the supply temperature is, the appliance will change color. This function is purely aesthetic in nature, but negatively affects the cost.
The faucet aerator can be equipped with a switch-off function after a certain amount of water has been supplied. According to buyers, this solution is very convenient for country houses, where water is supplied from a well or a personal well.
Additional features: material
After reviewing the range of modern aerators, you can understand that they can be made from different materials, among them:
- plastic;
- metal;
- ceramics.
In the first case, we are talking about devices that do not have such a high durability, because the material is subject to the aggressive effects of substances contained in water. But you will have to pay a minimum price for such a device.
The aerator nozzle on the faucet can be made of metal. For this, its different variations are used, it can be an alloy of bronze or ordinary steel. Such savers are susceptible to corrosion, which means they will not last long. Aerators made of bronze or brass will be more resistant to aggressive substances. They will last quite a while.
The faucet aerator can be made of ceramic to save water. Only the internal components of the device are made of this material, while the body is most often made of plastic or metal. The economizer, which is made of bronze or brass, will please with a long service life. As an alternative solution, you can choose a device with an internal filling of ceramics.
Extra options
When choosing an aerator, you should consider additional aspects, among them:
- the location of the thread on the tap;
- crane diameter;
- water flow.
An aerator to save water, reviews of which should help you make the right choice and are presented in the article, should be selected taking into account the threads on the mixer. There are taps that have external or internal threads. For the latter option, an aerator with an external thread is required. The diameter of the economizer must be equal to the diameter of the valve. Otherwise, the tightness of the connection will not be achieved. This will cause water to leak and render the fixture useless.
An adjustable aerator to save water must be selected taking into account the volume of the flow. This characteristic is one of the most important for such devices. You can find out about it by looking at the packaging of the equipment. If the permeability is 3 liters per minute, then this can help save up to 70%. With an increase in throughput up to 4 liters, the savings are reduced to 60%. If you purchase an aerator, the water flow of which is 5 liters per minute, then the savings will be 50%.
Additional Performance Feedback
The water saver appeared on the market quite recently, but has already become popular. As practice shows, only 60% of consumers confirm the fact of saving water. Among the reviews you can find positive and negative ratings. However, buyers claim that the stainless steel at the heart of such devices is of high quality, and the plastic has excellent molding.
The angle of inclination allows you to conveniently adjust the direction of flow. This is especially convenient for operating the aerator in the kitchen. According to buyers, the cost of the saver justifies itself in a few months. You can also save money on filter replacements. The unit is practical, it can be used in bathrooms and in the kitchen. You can install it yourself, according to home masters.
Conclusion
A water saving aerator seems to some to be economical, for others it acts as a regular faucet nozzle that acts as a divider. However, the device absolutely does not allow the formation of scale and water stone. Before and after the installation of such a device, consumers feel the difference. At the exit, it is possible to get water that does not have small inclusions and is safe.
