Any owner has many different tools and fasteners. Sometimes all this is stored in a separate box, on or in, neatly folded or piled in a heap. Often, starting or, if necessary, tightening the nuts, you have to look for the right key, screwdriver or pliers for a long time. A multifunctional tool box with compartments for wrenches, drills, fasteners, etc. will help you avoid confusion. You can buy it at the store or make your own. In today's editorial review of the site, we will consider the types of boxes for what you can make and how to assemble them with your own hands.
Toolboxes differ in the material of manufacture and the type of stored items. According to the material used, they can be:
- wooden. Wood is an affordable and easy-to-work material. For the manufacture of boxing, either durable multilayer plywood with a thickness of 10, 16 or 18 mm is used. The complexity of the design depends on the wishes and skills of the master;
- metal. Steel or iron structures are quite heavy, but have strength and durability. Lighter boxes are made of aluminum;
- plastic. These boxes are lightweight, durable, comfortable and modern design.
Also, the boxes differ in the type of tool stored in them and are:
- Unprofessional. They are a multiple compartment design. For them, bags or cases of different sizes are used.
- Power tool. Special boxes used to store drills, etc. As a rule, such boxes are equipped with a large compartment for certain equipment and several small ones for additional equipment.
- Professional. Most craftsmen prefer this particular type of tool boxes, since they have separate seats for a certain type of equipment.
- Universal. Boxes of this type have a large number of compartments and are used to store a wide variety of . There are toolboxes with removable partitions, which allows you to rebuild the interior space at your own discretion.
Tool box design
Tool boxes are also divided by design. And here we mean not the shape of the box, but the opening option and the presence of auxiliary compartments. There are the following designs:
- case. It is a rectangular box with a handle. Usually they have several compartments and removable partitions, allowing you to plan the interior space at your discretion. Similar designs differ in small dimensions and weight;
- container. Sufficiently roomy box with partitions and separate containers, which are folded according to the principle of matryoshka. Sections can be laid out up and to the sides, and the box itself is often equipped with wheels for ease of transportation;
- multibox. This is a vertically arranged design in which drawers with and fasteners are put forward like in a traditional linen chest of drawers.
Tool box requirements
When choosing a tool box in a store or deciding to make it yourself, you need to take into account some of the requirements that apply to its design:
- The bottom of the box or container must be sufficiently thick and strong, since it is on it that the bulk of the contents falls.
- When the box is fully loaded and lifted, its walls should not be deformed.
- It is recommended to choose a design made of fire-resistant material.
- There should be no gaps in the box so that dust and dirt do not get inside and do not contaminate what is stored in it.
Note! If you decide to purchase a tool box in a store, then give preference to multifunctional models with separate compartments and a closed inset organizer for small parts and fasteners.
Related article:
: what must be at hand. The main differences between similar tools, advice and recommendations from experts - read in our publication.
How to make a simple open toolbox
Inexpensive wood is most often used to make a tool box, especially if this is your first time. We propose to make the simplest box without a lid. Its advantage lies in the fact that almost any size can be placed and carried in it.
To make a simple tool box, you will need a board, wood glue, self-tapping screws, or a drill and a hacksaw. The simplest box consists of:
- long walls (front and back) - 2 pcs.;
- narrow and high sidewalls (the height of the front and rear walls should be greater, since a handle will be attached to them) - 2 pcs.;
- bottom (from a thick board) - 1 pc.;
- handles (square or round bar, galvanized, chrome-plated or aluminum tube) - 1 pc.
Assemble all the parts into a single structure using wood glue and. Pay special attention to the fastening of the handle. Such a box can be supplemented with internal partitions (removable or stationary), as well as make a lid. Dimensions can be very different: it all depends on your needs and desires. Assembly photos are shown below.
Plywood tool box
First of all, you need to make a drawing and calculations, transfer them to plywood. Carefully mark up, cut out the details along the outlined contours and make grooves, thanks to which the structure will be more durable. All sections must be processed with sandpaper.
The next step is to assemble the box. Glue is used to connect the parts. First, the frame is glued together (to facilitate the work, you can use clamps or rubber rings). We make the handle from MDF and carefully process it or use it from an old case or suitcase. To keep everything in its place in the box, you can make small compartments. One part of the box is taken under the compartment for placing screwdrivers.
Related article:
: the best home appliances that any self-respecting home owner should have at hand - in our publication.
Wooden organizer with lid
This design is great for storing equipment, and is also distinguished by its strength, reliability and solid appearance. To make it you will need:
- board;
- wood glue;
- metal corner plates - 8 pcs.;
- a pen;
- self-tapping screws;
- furniture hinges - 2 pcs. or piano loop;
- latches-locks - 2 pcs.;
- drill;
- clamps;
- sandpaper.
Mark the parts on the boards according to the dimensions given below.
Detailing
| Name | Drawing number and quantity |
| Main drawer | |
| Front Panel | No. 1 - 1 pc. |
| Back panel | No. 2 - 1 pc. |
| Bottom | No. 3 - 1 pc. |
| support rail | No. 5 - 2 pcs. |
| Side | No. 6 - 2 pcs. |
| Lid | |
| Top | No. 4 - 1 pc. |
| Front and back wall | No. 7 - 2 pcs. |
| Side | No. 8 - 2 pcs. |
| Removable tray | |
| A pen | No. 9 - 1 pc. |
| Bottom | No. 10 - 1 pc. |
| Long sides | No. 11 - 2 pcs. |
| Short sides | No. 12 - 2 pcs. |
| Partition | No. 13 - 2 pcs. |
Assembling the tool box
First of all, we assemble the box body and cover. To make it easier, use clamps and corner ties. The parts are connected using a special glue for carpentry. After the glue dries, we drill holes, countersink them and carry out additional fixation with self-tapping screws.
Next, in the same way we assemble a removable tray, install partitions and additionally fix everything with self-tapping screws. Inside the box body, on short walls, we install two strips, stepping back 300 mm from the top edge.
Once again we process the toolbox with fine abrasive paper to remove the slightest burrs. Coat the structure with a protective compound and allow to dry. If, after such processing, raised wood fibers are found, then it is necessary to process the box again with sandpaper and repeat the finish.
Completing the assembly, you need to connect the cover to the body using hinges and self-tapping screws. Install the handle and latches-locks, as well as protective metal lining on all corners of the box. The box is ready, and now it can be filled with the necessary equipment and fasteners.
A few words at the end
A tool box is a must-have item for any craftsman. You can buy it at any hardware store or make your own according to your needs. We hope that the examples of making tool boxes will be useful to you. If you have your own ideas, then share them in the comment form.
Hello everybody!
A toolbox today is a very indispensable thing for every owner. Most of us have a lot of different tools that we may not use very often, but nevertheless, we keep them, since not one repair can do without them. In order for the tool to be in one place, and it was convenient to transport it, we use special boxes. Often we just buy them in the nearest store, the range and variety allows us to do this. But why not make it yourself? The manufacturing process is not too complicated, anyone should be able to handle it, especially with a handmade thing, which is much more pleasant to use than a purchased option. This article will describe 4 different ways to make boxes, a photo report is attached.
Let's start making!
Manufacturing Method No. 1
We will need:
Material
Plywood;
- pine board;
- nails;
- wood glue.
Tool
- drill;
- a hammer;
- chisel;
- manual frezer;
- ruler;
- pencil;
- roulette.
The first step is to find the necessary material, plywood or trimming boards are suitable for this. Further, according to the presented drawing, it is necessary to mark up, then cut out all the details of the case. It is necessary to make special grooves into which the partition will be placed, for this we use a manual milling cutter, or another available tool.
The diagram shows the following body parts:
1 - wall (2 pcs.);
2 - sidewall (2 pcs.);
3 - bottom;
4 - groove along the thickness of the partition and a depth of 1/2–1/3 of the thickness of the material
When everything is ready, all elements of the box body should be sanded. Next, we assemble the body together, fix the parts with wood glue, and then additionally fasten with small nails.
Now we make a partition for the box, cut out a special handle, for this we use a jigsaw.
When the partition is ready, grease the grooves with wood glue and install it in its place.
Next, from the planks we make overhead handles, with the help of a planer we round the corners. Then we make tool holders from the rails, use a jigsaw, and a drill. The holes will serve for screwdrivers, and pliers, etc. will be installed in square cutouts. tool.
In order for the box not to get dirty, and to be protected from the environment, we cover the surface with varnish. As a result of the work done, we get such a homemade box.
Manufacturing method No. 2
Drawer-stool
Material
Plywood or OSB;
- wooden beam;
- self-tapping screws;
- wood glue.
Tool
Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette.
We take an existing sheet of plywood, make markings on it, and, according to the dimensions presented, cut out the lid (Fig. 1), then the longitudinal sides (Fig. 2) and sidewalls (Fig. 3).
Next, we take a wooden beam with a section of 40x50 mm, cut out a handle, and 4 legs with bevels at the ends at an angle of 15 °.
Next, we assemble the structure together, using self-tapping screws as fixing elements.
Parts layout:
1 - cover;
2 - tsarga;
3 - handle;
4 - leg;
5 - sidewall.
When everything is ready, use sandpaper or a grinder to round off sharp corners and clean the surface. Next, you can apply a protective coating.
The end result should be such an unusual tool box, which, if necessary, can be transformed into an ordinary stool, for this it is enough to turn it over and put it on legs, with it it will be convenient to reach the place we need, at a time when growth does not allow do it.
Manufacturing method no. 3.
Box for the young master.
Does your child love to craft? We offer to make a small box with him, where he will store his favorite tool.
To make a box with our own hands, we need the following
Material
16 mm boards;
- round wooden beam;
- self-tapping screws;
- wood glue.
Tool
Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.
First you need to take the existing boards with a cross section of 16 mm, then we make the markup, according to the dimensions provided, after which we cut the wood into the component parts we need.
The drawing shows the following details:
1 - sidewall;
2 - bottom;
3 - handle;
4 - handle stand;
5 - holder.
Using sandpaper, we grind the surface and remove sharp corners. When everything is ready, we begin to connect all the parts together, first you need to connect the bottom and sidewalls, then we put vertical racks along the marked lines and at the same time we put a horizontal handle.
We fix everything with glue and screws. Then we install special holders for screwdrivers.
Now you can paint, choose the color and coating at your discretion.
The toolbox is ready.
Manufacturing Method No. 4
The next version of the tool box is well suited for carrying various and necessary equipment for us, its appearance will be distinguished by solidity and reliability.
To make a box with our own hands, we need the following
Material
The board is not thicker than 12 mm;
- self-tapping screws;
- joiner's glue;
- a pen;
- corners 8 pcs.;
- latch 2 pcs.;
- loop 2 pcs.
Tool
Available cutting tool;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.
For the manufacture of the box we use such wood as: pine, linden or poplar. The most optimal thickness of the boards will be a thickness of 12 mm.
Next, we make the markup, according to the indicated dimensions in the drawings, after which we cut it into its component parts, as shown in the photo.
Full list of required parts.
In order to make sure that the wood is cut correctly, you need to put all the parts in a single box.
First, we assemble the bottom part and the lid of the box, for convenience we use clamps and corner clamps. We fix the parts together with carpentry glue.
Then, using a drill, we drill a hole for the self-tapping screws, we drill the holes.
The various designs of tool boxes discussed in the article are united by the ease of doing it yourself. Choose the right project and, guided by our drawings and photographs, make yourself a convenient portable storage for the tools and equipment used in your work.
simple open box
This box is good because the tools in it are located in their places and are in sight. You can’t put many devices in it, but there is a place for the main ones. An open box is useful in household use when you need to repair something outside the workshop: they reported to the box what was missing and went to work.
A wooden tool carrier comes out heavier than factory counterparts, so you should not plan it too bulky. The box will not beat the knees if you make it narrow. The high handle also adds convenience - you don't have to bend down low to pick it up.
Pick up suitable pieces of plywood and pine board trimmings. Mark and cut out the details of the box. Select the grooves in the blanks with a hand router or make two cuts with a circular saw and clean the recess with a narrow chisel.
Details of the box body: 1 - wall (2 pcs.); 2 - sidewall (2 pcs.); 3 - bottom; 4 - groove along the thickness of the partition and a depth of 1/2-1/3 of the thickness of the material
Sand the surfaces and assemble a rectangular box from blanks. Lubricate the ends with carpentry glue and fasten the parts with small carnations.
Saw out a central partition from 5 mm plywood, the width of which should be 1 mm less than the distance between the grooves in the walls of the box. Mark the location of the cutout for the hand, drill the entry hole for the file, and cut the plywood with a jigsaw.
Partition drawing
Spread the grooves with glue and install the partition in place.
Make two pads for the handle from a block with a section of 20x45 mm, rounding the corners of the blanks with a planer. Prepare holders for hand tools from the rails: in one, cut out recesses for pliers and tongs with a jigsaw, and in the other, drill holes for screwdrivers with a drill. Using glue and screws, fix the parts to the partition by placing them at different heights.
So that the surfaces do not get dirty for a long time, cover the box with varnish.
Toolbox in stool
In this upside down stool, you can move the tool to any place in the house or yard, and put it on its legs, reach for a shelf or hammer a nail where your height is almost not enough.
Using plywood or OSB with a thickness of 10-15 mm, cut out the cover (item 1), longitudinal sides (item 2) and sidewalls (item 3) according to the dimensions indicated on the drawings.
Make a handle and four legs with bevels at the ends at an angle of 15 ° from bars with a section of 40x50 mm.
Assemble the stool by fastening the parts with screws.
Box assembly scheme: 1 - cover; 2 - tsarga; 3 - handle; 4 - leg; 5 - sidewall
Round the edges of the cover and the oblong cut in it, apply a finishing coat.
Box for the young master
If your child enjoys crafting or repairing, make a small box with him for his favorite tools.
Take planed 16mm boards and cut out the pieces according to the drawings. Prepare a round birch stick for the handle.
Drawings of the details of the box: 1 - sidewall; 2 - bottom; 3 - handle; 4 - handle stand; 5 - holder
Draw lines parallel to the edges on the sidewalls corresponding to the positions of the handle posts, drill through holes for the screws between them.
Remove the burrs with sandpaper and proceed to assemble the box. Connect the bottom and sides with glue and screws, then install the handle stand along the marking lines.
Now replace the second post while inserting the handle into the blind holes. Screw on the screwdriver holders.
Color the box in the color your child chooses.
Wooden box with lid
The necessary set of tools varies depending on the hobby or profession, respectively, and the internal structure of the box may be different. The next tool carrying option is suitable for any equipment, it is distinguished by its solidity and reliability.
Use light wood for the box: pine, linden or poplar. The optimal thickness of planed boards is 12 mm, thinner ones are more difficult to fasten, and thicker ones will increase the weight of the structure.
Required accessories:
- A pen.
- Corners - 8 pcs.
- Latch — 2 pcs.
- Loop - 2 pcs.
Mark the lumber according to the drawings and cut the blanks.
Cutting blanks for the box
Table. Parts list
Make sure the cutting is correct by folding the box out of the blanks. Sand one by one all the parts with sandpaper No. 220 and mark them. Assemble the bottom and lid of the drawer using clamps, corner clamps, or mounting brackets to secure the blanks. Lubricate both joining surfaces with wood glue.
Drill guide holes for the screws and countersink for the hats, and after fastening the parts, wipe off excess glue with a rag.
Fasten the blanks of the body of the portable part. Replace the dividing partitions by screwing them on the sides and bottom with screws.
Screw the carrying handle in the middle.
Install support rails inside the drawer at a distance of 30 mm from the top.
Clean out pencil marks and burrs near the screws with a fine sandpaper, blow dust off the surface.
Cover the box with a layer of polyurethane varnish, after drying, remove the raised pile with a “zero” and repeat the finish.
Align the hinges with the gap between the body and the lid of the box. Mark and make pilot holes for screws 10 mm deep, fasten the hinges.
Screw on the corner pieces using small screws.
Install the handle and latches on the lid.
Fill the finished box with the tool.
If desired, place containers with dividers or cassettes for storing small items in the large compartment of the drawer.
If you decide to add partitions inside the box, make them removable so that you can change the free space for a new tool.
Practical storage systems for the garage or workshop.
For many, the garage is not only a place to store a car, but also a real car, locksmith and carpentry workshop. Therefore, it is important that everything is always at hand and in the right place. But sometimes it is so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in the "male Eden". In this review, simple yet effective ideas will help you create almost perfect storage systems in your garage.
1. Magnetic tape
Magnetic tape for storing small metal parts.
Magnetic tape pasted on the wall in the garage can be used to store drills, scissors, bolts, nuts and other small metal parts. Such a magnetic holder is very convenient to use and will help prevent the loss of small but important spare parts.
2. Plastic containers
Rack made of plastic containers.
From large plastic containers and blocks of wood, you can build a large rack for storing tools, wires, spare parts and any other things. The organization of such a rack will allow you to put things in order and significantly save space in the workshop or garage.
3. Roof rails
Rails for trash bags and paper towels.
On one of the free walls of the garage, you can place several small roof rails, on which it will be convenient to place rolls of garbage bags, paper towels, sandpaper, adhesive tape, coils of rope and much more.
4. Furniture brackets
Brackets for furniture storage.
Many summer residents use the garage to store folding outdoor furniture. So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.
5. Jars
Storage of nails, bolts, screws and other small things.
Bolts, nuts, nails, screws, screws and other little things do not take up much space, but it is extremely inconvenient to store them mixed. Putting things in order will help jars with lids screwed to the bottom of a wall cabinet or under the desktop top.
6. Grid under the ceiling
Lattice for storage of pipes and plinths.
A plastic grate screwed into the corner of the garage under the ceiling is ideal for storing leftover water pipes, skirting boards, profiles and other long items. Such a storage system will help to significantly save space in the garage and prevent possible breakage of fragile building materials.
7. Organizer for screwdrivers
Wooden organizer for screwdrivers.
A small practical screwdriver organizer that any man can make by simply drilling the right number of small holes in a block of wood. Such a product can be hung on one of the walls of the garage or workshop to keep all the screwdrivers in one place.
8. Vertical storage systems
Vertical panels for storage.
Several perforated metal or plywood panels under a table or in a cabinet provide an ergonomic and comfortable place to vertically store small hand tools.
9. Plastic pipes
PVC pipe storage systems.
The remains of PVC pipes of different diameters can be used to create a variety of storage systems. For example, pieces of wide pipes screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill and other tools of this type. From pieces of PVC pipes of medium diameter, you can make cells for storing various sprays, foam, paint tubes and other containers.
10. Tassels
Hanging brush storage.
It is very convenient to store paint brushes and spatulas suspended on a thin wire or on a thin steel rod.
11. Rack for garden tools
Wooden rack for garden tools.
So that garden tools do not take up a good third of the garage space, store them on a special rack screwed to one of the walls. Such a rack can be made with your own hands from wood bars, a wooden pallet or pieces of plastic pipes.
12. Multifunctional rack
Pallet rack with shelves.
A wooden pallet, complemented by shelves made of pieces of wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.
13. Rod holder
Rod storage.
A regular wire rack can be used to create a handy rod holder. Such a storage system can be fixed under the ceiling so that it does not take up space below and does not get underfoot in the autumn-winter season.
14. Pegboard
There are many professions that use different types of tools. Most often, tool boxes are purchased for their storage, but sometimes high-quality storage is easier to do with your own hands.
If you are interested in this or that type of craft, and you are not sitting at home idly by, naturally, you have a fairly large number of tools. To ensure that your tools are always at hand and securely stored, they need to be provided with a storage system in the form of a separate enclosed space called a drawer. for storing tools. In addition to safety, the use of such a box will greatly help in the work, since the filling will be neatly sorted into compartments and in the future you can find the necessary device “blindly”. Also, this device is necessary for car owners, or rather, owners of trucks and gazelles. The box must be well secured in the car. And this means that when making it with your own hands, you need to think carefully about where it will be located in the car and how to fix it there.
Decide on two criteria:
- Will you only store tools in it, or do you also need it for ease of transportation?
- what sizes of tools do you intend to store in it?
Crate classification
Body material:
- plastic - light in weight, convenient in everyday life and for transportation;
- metal - much heavier than plastic, but at the same time much stronger, more stable, have a more rigid structure, cannot be large due to the severity of the metal;
- metal-plastic galvanized - light, durable and roomy, suitable for both storage and transportation of professional tools. But all these advantages determine the corresponding price - it can range from $150 to $500 and more.
- wooden - the most affordable material for making a tool box. Moreover, it is easier to do it with your own hands from this material, or rather from plywood 10 16 or 18 mm.
By type of stored instruments:
- hand tools - as a rule, they are represented by one large compartment for large tools (screwdrivers, hammers, keys) and 2-3 small ones for smaller tools;
- an electric tool is a case that is functionally designed to store and move a specific power tool. Most often it has one main compartment for the device itself and several recesses for equipment.
- organizers - boxes designed to accommodate a large number of different sizes of tools. They have many compartments, models with modular partitions deserve attention, which, for the convenience of the owner, can be rearranged from one place to another.
- professional tool - a special kind of cases with certain seats for specific tools, more resistant to falls and adverse environmental conditions.
- non-professional tool - consists of boxes of both small and large enough sizes with many compartments and niches for various kinds of tools, often these are cases in the form of bags.
There are many tool box companies such as stanley, fit– american firms, keter- no less popular Israeli company, Spanish company tayg, german Kroft and many others, differing in quality and price of products.
As an alternative to all these firms - the opportunity to make a tool box with your own hands. You can thus save on cost and get a completely competitive option that meets exactly your requirements.
Types of boxes
Tool boxes made in home workshops are mostly made of wood and come in a variety of shapes. Boxes of the classical form - "bast basket" are popular and easy to manufacture. in the second and third place - a box in the form of a chest - a container, and in the form of a case.
 |
 |
 |
Materials for making a tool box
- wooden boards 15-25 mm thick
- round wooden rod of the desired length
- self-tapping screws, wood glue, sandpaper for cleaning surfaces
- a set of tools - a grinder, an electric drill, an electric jigsaw, a screwdriver
- measuring instruments - ruler
- screwdriver, hammer
Manufacturing steps
Using this technology, it is possible to manufacture boxes of more complex designs, creating the required number of compartments and niches due to partitions.
Using the same technology, it is possible to manufacture a closed box, which is more reliable and convenient for transporting tools.
Additional steps in the manufacture of a box with a lid
For self-manufacturing of currently popular transformer boxes you will have to break your head more, but it is quite possible to implement this idea.
To do this, with the help of computer programs, you need to develop the design you want, but a set of necessary elements that can be purchased in special stores will help you translate it into reality. The number and complexity of the selected elements depends on your requirements for the box. Assembly can be done on a wooden base using aluminum strips and corners. Fasteners are made with rivets.
If you are a purposeful and creative person, then the process making a tool box will not be difficult, but by seeing the fruits of this work, you will increase your self-esteem and save budget funds.
