Warm shower in the country projects. Building a summer shower with your own hands - step by step photo and video instructions. Do-it-yourself shower construction technology

The construction of a summer shower for a summer residence is not complete without questions related to the choice of material and the determination of the size of the structure. In addition, I want the building to be heated. This will make it possible to swim on cold days when the water in the tank does not have time to warm up from the sun. An important issue is the organization of drainage and discharge of dirty water. Today we will look at how to build a summer shower with our own hands, and we will try to address all the questions of interest.

A country shower is so simple that it does not require a detailed diagram. Usually withstand the standard dimensions of the booth 1000x1000x2200 mm. It is impossible to build a booth below, since part of the height will be taken by a wooden pallet, plus a watering can above your head. But the width and depth of the structure, it is desirable to individually select the physique of the owners. For example, an obese person in a small booth will be cramped, so the dimensions will have to be increased.

Drawing of a simple summer shower for a summer residence

If you decide to cultivate the building, build a dressing room with a dressing room, install benches and a table in it, drawings will already be needed here. Draw what you want to build, specify all dimensions. When drawing up a detailed diagram, consider the following points:

Wooden shower cubicle

Building a cabin out of wood is the most common option due to its ease of construction. Wood is an environmentally friendly material, easy to process. Its only drawback is susceptibility to moisture and bugs, so it requires additional processing. To build a wooden shower for a summer residence, you will need boards and timber, preferably from coniferous trees. You can, of course, use oak or larch. The material made from these types of wood is more durable, but it is more difficult to process. Having decided on the material, get to work:

Since we are building a wooden shower, we will make the frame from wood. The main load on the racks will create a tank of water. If its volume is about 200 liters, then the main racks must be installed from a bar with a section of 100x100 mm. To fix the door, install additional racks made of timber with a section of 50x50 mm. The distance between them is equal to the width of the doors themselves with the door frame.
Under all vertical racks, dig holes 80 mm deep. Fill the bottom of the pits with a 100 mm layer of crushed stone and sand.
To make the tree rot less in the ground, grease the edges of the timber with bitumen or machine oil. Top wrap with two layers of roofing material. Insert the posts into the pits, level them with a plumb line and concrete.
Another method to extend the life of the posts is to cast metal bushings. They can be made from pieces of a metal pipe with a diameter of 100 mm. When the concrete hardens, chop off the edges of the square beam with an ax to the size of the inner diameter of the pipes and install them in the concrete bushings. Under the door pillars, similarly concrete bushings from a pipe of a smaller diameter.
When installing vertical racks, make the front ones from the side of the doors 100 mm higher than the rear ones. The difference in height will help build a pitched roof.
Connect the exposed racks around the perimeter from below and from above with horizontal jumpers, securing them with bolts. If you plan to make the floor in the form of a wooden lattice, reinforce the lower lintels with metal mounting corners. The jumpers will be supports for the logs and must support the weight of a person.
Now you need to make a frame for the tank from wooden jumpers fixed on top of the frame. A tank filled with water made of any material has an impressive weight, so the frame under it must be made strong.
Flat water tank for water installed on the roof of the shower
Sheathe the sides of the cabin frame with a sanded board. Make a door from a board 20-25 mm thick. Cut it to the required length, lay it in a row and sew it with cross bars. Knock down the door frame from a board 40-50 mm thick and fix the door to it with hinges. Now the whole structure can be bolted to the door pillars.
Treat the finished booth with an antiseptic and cover with drying oil or varnish. Cover the door from the inside with a film so that water does not get on it.

Variants of wooden cabins for a summer shower

Polycarbonate cabin

It is easier to build a polycarbonate booth than a wooden one, but you will need welding experience. The fact is that for polycarbonate it is necessary to weld a frame from a metal profile. For racks, a profile with a section of 40x60 mm will go, and a smaller section can be used for strapping. The use of a wooden frame for polycarbonate is not desirable, since both materials tend to "play" from changes in weather conditions. From this, polycarbonate sheets can be deformed.

The manufacturing process of a metal frame for polycarbonate is similar to a wooden structure. Concrete the main racks, and then weld the upper and lower jumpers. Three jumpers must be made in the middle of the frame so that the polycarbonate sheets do not sag. The fourth is not needed. She will interfere with the doors. From above, weld the frame under the tank. Make a frame for the door from a profile with a section of 20x20 mm and fix it with hinges to the rack. Paint the entire structure with waterproof paint.

For sheathing, use opaque polycarbonate honeycomb sheets, 6-10 mm thick. Cut a large sheet into fragments according to the size of the booth with a circular saw. Fix the resulting polycarbonate plates to the frame with self-tapping screws with a thermal washer. The door is also sheathed with a sheet of polycarbonate. Bolt the handle and latch to the frame.

Polycarbonate shower option with dressing room

Shower tank

Cabin made of corrugated board

A good option for giving would be to build a cabin from corrugated board. Lightweight, strong and durable material will last for years. For a metal profile, both a metal and a wooden frame are suitable, but always with additional transverse bars. Sheets of corrugated board are soft, and additional emphasis will not interfere with them. We build any of the frames for the metal profile in the same way as the above options. In any case, weld the door frame from a metal profile.

Fastening the corrugated board is done with galvanized self-tapping screws with a sealing washer through one wave. First fix the sheets of corrugated board on the side walls, then sheathe the door. If you need to cut the material, use scissors or a special disc with teeth on the grinder so as not to burn the polymer coating of the corrugated board when cutting.

Cabin made of bricks

The construction of a brick cabin in the country requires the construction of a foundation. To do this, it is enough to dig a trench 200 mm wide and 400 mm deep along the perimeter of the future structure. Fill the trench with a brick battle and fill it with liquid concrete so that it seeps between it. A week after the concrete has set, start laying bricks on the cement mortar. Don't forget to install a box for the door. The door itself can be made of wood or a frame can be welded from a profile and sewn up with a sheet of corrugated board. On the last masonry, wall in wooden blocks across the building, preferably the thickness of the brick. They will lay the roof and fix the tank.

Installing the roof and tank

The material for the roof will need to be hard. Slate or corrugated board is well suited. After fixing the roofing material, drill a hole in the center of the roof. Place the tank on top so that the water supply tube passes through the hole. Screw the tap and watering can onto the tube.

The optimal tank capacity for a country shower is 200 liters. In the store you can buy a plastic or galvanized tank or make it yourself by welding from stainless steel. Any container with a neck for pouring water will serve as a tank. To make a shower for a cottage with heated water, mount a heating element with a power of 2 kW in a metal tank. Paint the top with black paint. The dark color attracts the sun's rays, and the water will heat up faster.

Scheme of the device of the tank for a summer shower with heating

If you install wood-burning titanium in a cabin in the country house, then in addition to hot water, you will get a heated room. Then you will need to install a second tank with cold water next to it.

Arrangement of the floor and drainage

The floor and drainage of the shower for giving can be done in two ways:

Summer shower in a country house

If there is free space, a country shower can be built in the house. To do this, it is better to purchase a shower stall in the store. Make a recess in the concrete floor and install the acrylic tray according to the product instructions. Connect the siphon on the pallet with a corrugated hose to the sewer. Seal the joints of the pallet to the floor with sealant. Further, according to the instructions, assemble the frame from the profile, install the doors, supply cold and hot water from the boiler.

As you can see, you can build a summer shower with your own hands in the country from almost any material. The main thing is to prepare drawings, material, tools and show aspiration.

In contact with

A shower cabin on the garden plot allows you to wash yourself after field work and refresh yourself on a hot summer day. Each summer resident tries to build such a shower with his own hands near the house. The article will help craftsmen and novice builders to install an inexpensive and comfortable outdoor shower on their territory.

When building a summer shower, several conditions must be met, otherwise its operation will be difficult or impossible. Before listing the prerequisites for the right place for a shower cabin, it must be emphasized that these items are typical for any type of summer shower room.

The first and most important condition is a well-lit place. Even if your tank has a heating element, it is not necessary to burn electricity on a hot summer day when the water can warm up naturally.
When choosing a place, it is necessary to take into account - the shower must stand on a hill. The daily water consumption is from several tens of liters or more, so you need to ensure unhindered drainage into a gutter or a special drainage pit. We must not forget that wastewater can bring you a large administrative fine for damaging land.
The building should not be located far from the house, as on a cool day or in the evening it is uncomfortable to run a long distance after washing.
If you are thinking of a capital heated shower, then do not remove it far from the buildings. A shower cabin can be part of a utility block, combined with an outdoor toilet, adjacent to a garage or a shed.
Do not place the village shower in the bushes or between the trees - there is little sun, and annoying insects - on the contrary.

Installing the frame on a hill makes it possible to acquire a natural drain

Types of summer showers for a country house

There are several types of outdoor showers. Choose one, and if the site is large - several showers for different ends of the site, where they will each perform their own function.

Shower column

This design is very good for installation in the middle of the garden. On a hot summer day, it’s good to freshen up under it, and the water will not interfere with the surrounding plantings at all. The shower-rack is not enclosed. It is necessary to take into account one point - it can be equipped with the existence of a water supply system and good water pressure.

You can equip a summer shower-rack on a special tripod

A lightweight shower structure can be attached to any support, for example, to the wall of a house or a barn, the main thing is to cover the adjacent surface with a waterproofing material, such as a film or tile.

Shower panel attaches to any surface

Shower-stomper

This design has proven itself well in garden plots. Its principle is that a person tramples, creating pressure in the system. One end of the hose is lowered into a container of water, and the other is connected to a shower head. This way to freshen up is good for a summer cottage and for trips to nature.

Shower - toptun

shower cabin

And, finally, a shower cabin - a stationary summer shower, consisting of a closed room, a tray and a water tank. The design is good for giving and for a country house. The structure can be made of wood, corrugated board, polycarbonate or covered with tarpaulin. The container is heated by the sun or by electricity. Usually this is a room covered on all sides with a door, and often with a dressing room for clothes and shoes.

Stationary summer shower for the garden plot

Drainage systems

Building a shower is half the battle, you still need to figure out where to drain dozens of liters of dirty water after washing. There are several options and factors influencing the choice. For example, you have conceived a capital building, and there are a lot of family members who use the shower - it makes sense to make a high-quality drain system. If your shower is a temporary building, or you will rarely use the shower, then it is quite possible to separate the channels and make a filtration field.

Drainage ditches

Filter field

Let's start with the simplest stock. In order for water to go into the field, it is necessary to build diversion grooves or equip drain channels. This is done elementarily. From the hillock on which the shower is built, gutters are dug in all directions or only in one. It depends on the location of the soul. Gutters can be sprinkled with a sand gravel drainage mixture or laid out with roofing material. The direction of the sewers is a field or a vegetable garden. Water slowly soaks into the ground, thereby irrigating it.

The drainage system may also be underground. It is done like this. Perforated pipes are laid shallow underground, through which water seeps into the ground. The pipes must be laid on a bed of sand and gravel. The main thing is to accurately calculate the ability of the soil to absorb water, otherwise you will get flooding of the site.

Perforated pipe suitable for underground drainage

septic tank

Building a septic tank is the most profitable way to dispose of wastewater. Firstly, it protects the surrounding soil from pollution, and, accordingly, you will not have problems with the law. Secondly, it can be used for shower and toilet at the same time. The construction of a septic tank in a summer cottage can be simple and capital, the main thing is to follow a few basic principles.

The septic tank should consist of a sump and a drainage tank.
The entire structure cannot be located close to a well or well.
If the structure is designed to receive a large amount of water, then several receiving chambers are needed.

The simplest home septic tank made of metal barrels

The most elementary construction of a septic tank consists of the following points.

Excavation of a pit for a sealed receiving chamber. It can be a barrel or concrete rings with a lid and a bottom. A lid is required to prevent rain and groundwater from filling the tank.
Installation of an unsealed container for drainage. It is mounted on a pillow of gravel and sand, connected to the receiving chamber by pipes.

For a country house with living all year round, you can build a more complex septic tank using an excavator and a crane. It is not easy to make such structures with your own hands, but the order and installation of a capital septic tank will pay off in the first year of operation.

Video: Types of septic tanks and the principle of operation

Projects of a summer shower cabin in the country

Projects are needed not only for those who have little imagination or no drawing abilities. Drawings of a future building will be useful even to an experienced builder - why invent a bicycle if you can copy and build according to a finished drawing. We suggest you choose your favorite shower room and build it yourself or with the help of construction teams.

The easiest drawing of a garden shower cubicle

It is very convenient to build a combined unit: toilet + shower.

Combined block

A simple design will appeal to fans of fast and reliable buildings. If you sheathe the frame with corrugated board, then in a short time you will build a shower with a dressing room for clothes.

The project of a shower sheathed with a profiled sheet

This diagram shows how to build a frame-based shower from shaped pipes with a large water capacity of 1000 liters.

Profile pipe project

The capital structure is made of timber with a pitched roof. In such a soul you will not be afraid of either the wind or the coolness.

Drawing shower from a bar

A practical option for a shower with a dressing room made of wood covered with OSB or chipboard.

Shower with dressing room

You can make a frame from metal pipes. If you have the ability to cut the pipe to size, then this project will seem easy enough.

Project with a frame made of metal pipes

Construction of a simple summer shower without water heating

For a simple shower room in a summer cottage, not intended for daily use by two or more family members in the summer, it is necessary to build a simple base, drain and frame, sheltered from the wind and prying eyes. First of all, decide whether there will be a water tank, or whether there is a water supply system with good pressure on the site. In the second case, you can mount the shower panel and connect it to the water supply. It is good to use a treadmill shower (all these devices are described in the chapter above). But we will take into account the installation of the tank. Step by step construction looks like this:

We level the site on a hill and mark with pegs a place under the base. The foundation does not have to be capital, because the whole building will be quite light. You can dig holes under the racks to a depth of 30-40 cm. In each hole we place a column of wood or several bricks. We waterproof them with roofing material or a special liquid and make a strapping. Then we will fix the floor on this base.

wooden base

This design usually provides for natural flow to the filtration field through grooves or troughs. Therefore, the floor should go at a slight slope, or a drain hole is mounted in the middle.

sloping base

Really do with a slatted floor or use a pallet. Then the water will drain naturally. In any case, the bottom under the floor must be covered with a drainage mixture of sand and gravel.

Base grid

The next step is to install the frame. It can be a light wooden frame, consisting of four racks, fastened with jibs or cross bars, and a top harness. You can make a place under the door, or you can leave it as it is. Be sure to cover the top with a board or OSB to put the container.

wooden frame

Now you need to mount the container. It can be a large plastic or metal barrel. Or purchase a special container for a summer shower.

Special plastic tanks

We install the tank evenly and securely so that the watering can looks down. The device of a plastic container without heating is quite simple. Water is supplied from above with a tap. The container is filled with a hose.

Built-in watering can with a tap at the shower tank

Now you need to sheathe the frame. This can be done using any available materials at hand: profiled sheet, polycarbonate, wood panels or ordinary tarpaulin. In the end, you can just cover the shower with a thick film.

You can just cover with a matte film

Do-it-yourself summer shower in the country. Video master class

Do-it-yourself construction of a capital street shower

A capital structure implies a solid foundation. For him, it is better to choose a shallowly recessed with wooden formwork or a pile foundation. You can make it with your own hands.

We level and mark the place with pegs and ropes. We drive in or dig in wooden poles 30 cm. Holes should be covered with sand gravel for better drainage. Wrap the protruding parts with roofing material.
After that, we build the formwork. This is necessary if you are going to use the shower for more than one year.
We fill the foundation with concrete.

Attention! The base must be above ground level to create a drain, and protect the frame from destruction.

Pouring the foundation for the shower structure

To make the structure even stronger, the foundation is strengthened with piles or pillars. To do this, before pouring concrete around the entire perimeter, metal pipes with a diameter of 9-10 cm are driven in. After the concrete has hardened, frame racks are inserted into them. Such a foundation is less susceptible to seasonal erosion of the soil.

Column foundation made of pipes

frame

The frame of the capital structure is made of metal or wood. The metal frame is much stronger, especially if a large water tank is installed on it. Wooden - cheaper and more affordable. If the tree is impregnated with water-repellent mastics or resins, then the structure will last for a long time. The construction of the frame of the capital premises resembles the construction of a temporary structure, with the only difference being that high-quality wood of sufficient thickness is used. The construction process can be divided into several stages.

An interesting option is lining the structure with clapboard - this is both beautiful and additional protection from the wind.

Shower room lined with clapboard

Water tank installation and connection

Water tanks with a heating element can be of two types. Each of them has its pros and cons. Just choose the one that's right for you.

The second type of container offered by retail outlets today is a galvanized steel tank. Tanks of one hundred and two hundred liters are designed for low ceilings, as they have a flat design and a short shower head. This tank has a boiler system that requires a constant water supply.

Galvanized steel tank

Another container suitable for country showers is a heated plastic tank. Its minus and plus is that it does not have a constant supply of water, and therefore the heating element must be turned off after heating. Its installation is very simple. The tank is mounted on the roof and connected to electricity.

Plastic tank with heating

How to make a water heater for the shower with your own hands

Summer shower: photo ideas

This section contains the most interesting finds for the shower in the garden. Many ideas are quite unusual, some are functional and simple, while others require financial investments.

The original shower rack can be made from metal pipes with a hole. The main thing is to ensure sufficient water pressure.
If there is an opportunity to show off a little, then a stone bath is what you need. The shower head will become part of the shower bar or mounted directly from the wall of the house.
Clay shower will be an interesting highlight of a country house. The Mediterranean style will give it originality, and you - a good mood.
The wooden shower, which looks like a beach changing room, is made of impregnated wood and fits well with the design.
A stone shower is the natural warmth of a natural material.

Building a summer shower can turn from a necessity into an exciting activity. Use your imagination and you will certainly create a comfortable and original corner for taking water procedures.

Preparations for the summer season are already in full swing. Someone uses summer cottages for growing crops, someone prefers to sow them with lawn grass, plant ornamental plants and just spend time in nature. Be that as it may, on hot summer days to freshen up and take a cool shower everyone wants. It is not always possible to hire a construction team to build a shower on the site, and such costs will not always be justified. So that you can competently and easily cope with the construction process, in this article we will look at 8 tips for summer shower arrangement at the cottage with their own hands.

1. Where to start?

If you have been thinking about building a summer shower in your country house, then you already have an idea of how it will look like and what you need to purchase. In addition to the design itself, important parameters are:

Choice of location;
Shower size;
Water tank volume;
The nature of the building - temporary or capital.

Many try to choose the most secluded corner behind the house or in the shade of trees in order to hide such an intimate structure from prying eyes. This is what is the main mistake! By building a shower among trees, you will be exposed to constant attacks of insects that love moisture and coolness so much, and deprive yourself of the opportunity to naturally heat the water in the tank. That's why place for the future building should be located in an open, well-lit area and in no case be in a pit or in a lowland. Even if you plan on using a heated tank, it's wiser to ditch it in order to save money on hot days. The building itself should not be located at a small distance from. Taking a shower late in the evening, you need to get home as soon as possible so as not to get sick.

Concerning size future the buildings and the volume of the water tank. The recommended height of future walls is 200-300 cm. It is necessary to build on the growth of the tallest family member, who should not rest his head on the shower head. Width and length shower space is calculated depending on whether the building will have a dry dressing room or be limited to only a wet area. The option with a dressing room is, of course, more convenient, the clothes will be protected from getting wet, and you will have the opportunity to change clothes comfortably. Thus, your shower will consist of two sections, separated by a partition. An area of 220 × 120 cm is quite enough for these two zones, even taking into account the skin.

Choosing a tank for water, it is necessary to take into account the number of people who will use the shower, and the intensity of its use. If you come to the country house only on weekends and use the shower after a hard day's work, then a container that will hold the amount of water at the rate of 40 liters per person is quite enough. This will allow each user to pour water continuously for about 10 minutes. If a much larger number of people take water procedures in a row, you should think about a larger tank. But keep in mind that temporary buildings will not withstand containers with a volume of more than 200 liters. As the tank itself, you can use iron or plastic barrels, or purchase ready-made country models with a built-in watering can. A little advice- if you paint the surface of the tank with black paint, the water in it will heat up much faster due to the ability of black to attract heat.

So let's select basic moments:

Location - in an open, elevated, bright area, at a maximum distance of 2-4 meters from the main building;
The size of the room - the height is selected taking into account the growth of the tallest family member, the minimum comfortable perimeter is 100 × 100 cm;
The size of the water tank capacity is 40 liters per user, multiplied by the number of people who will receive water treatments in sequence.

Character future the buildings- temporary or capital, it is necessary to choose based on the following parameters:

2. We equip the foundation and ensure the outflow of water

The basis of any structure, of course, is reliable. In the case of a summer shower, the foundation must not only protect the structure from groundwater washout and subsequent subsidence, but also be able to quickly drain large quantities of used water. Building any foundation starts with markup. In the selected place, you need to draw a contour. For example, the size of the shower will be 120 × 120 cm - in such a space it will be comfortable for a person with any build. At the corners of the rectangle, you need to drive in pegs, pull the cord around the perimeter and check the dimensions with a tape measure.
Such markup is universal and is performed before the construction of any kind of shower. Now consider types of foundations for various buildings.

Foundation for a simple temporary shower

For the construction of a temporary nature, it is enough to remove the top layer of soil 15-20 cm deep within the outlined rectangle and level the area. Now you need to make a pillow that will help drain water. To do this, prepare a mixture of crushed stone and. You can simply fill the hole halfway with sand, and pour a layer of rubble on top. Small stones will contribute to the settling of soap deposits on their surface. Additional filtration sandy layer will avoid rapid mulching. Such a design can be placed near the garden without harm to plants. On top of such a base, they usually fit, which serve as the floor in the summer shower. To prevent the rapid decay of wooden materials that will often come into contact with water, it is recommended to place pallets or boards knocked together at a height of 15-20 cm above ground level. For formwork you can use old bricks or. They are laid out around the perimeter of the base, leveled and rammed with a mallet.
You can use wood for wall or floor decoration only after, which will make it moisture resistant. The most effective way is impregnation with hot oil and subsequent opening with drying oil or. The arrangement of such a foundation will allow you to use an outdoor shower for more than one season.

Foundation for capital construction

If the shower will be used frequently and not by one or two people, it is necessary to think about the construction of a capital building. The most expensive way will be a brick construction. But it is easiest to heat it in the cool season. To do this, it is enough to insulate the walls. The best option would be a frame building made of metal or wooden beams. Particular attention should be paid to the arrangement of a reliable foundation. In this case, it is necessary to fill foundation from concrete.

According to the markup, you need to dig a hole about 30-35 cm deep. Mortgages must be made along the perimeter of the rectangle. For these purposes, you can use old iron pipes. The larger their diameter, the stronger the structure will be. At the locations of the pipes, a hole up to 30 cm deep is made with a drill, into which pipes or wooden beams are hammered. If you use a tree, then you need to protect its surface by wrapping it with roofing material or treating it with hot bitumen. After that, a cement-sand mixture is poured. Wooden mortgages can be made not only in the corners, but also around the entire perimeter of the base. To do this, use a sufficient width of the logs, which can provide further installation of the floor. The base must be level. This will help prevent the accumulation of water in places with slopes. Filling is carried out according to the technology of arrangement. Use special building beacons and rule.
disadvantage the foundation, which is made by pouring, is that you can start arranging the internal space only after it has completely dried. For brick buildings, you can use a cast reinforced concrete slab with a thickness of 170-300 mm as a base. This will significantly reduce construction time.

Arrangement of water drain

Any capital construction needs a high-quality outflow of water.

Best for waste collection septic tank, which must be placed next to the shower, but in no case under it. If you decide to save space on your site and still place it under the shower, after a short period of time you will begin to feel a sharp, unpleasant smell inside the building. In addition, there is a risk of soil collapse around the septic tank and, as a result, the destruction of the foundation. The recommended distance from the shower cabin is 1-2 meters. A drain pipe is removed from the shower tray or a drain ditch is drawn into the septic tank, which must have a sump and a drainage tank. A pit is being dug for the receiving chamber. It must be airtight. It can be a tin barrel or. It is recommended to cover the container with a lid so that rain or groundwater does not fill it. Nearby is a leaky drainage tank. It should be installed on a pillow of sand and gravel. These two compartments are interconnected by pipes.
Another option for collecting waste - cesspool. To equip it, you need to dig about 2m3 of earth. This is the optimal volume that will ensure long-term use. At the bottom of the pit, a drainage cushion is made of sand and gravel, and the walls must be strengthened and made waterproof. You can overlay them with bricks, use ready-made concrete rings, or you can strengthen the pit with old ones. Equipping the drain pit, do not forget that it needs to be pumped out. In this regard, it must be located in a place where unhindered access of special equipment will be provided. In addition, the pit should have a distance from the residential building of at least 3-4 meters, since the formation of characteristic odors is possible.
For simpler types of shower that will not be used with great intensity, it is enough to equip drainage well. It will be located directly under the shower. A hole is dug, 2 meters deep, a layer of rubble is poured at the bottom, and then a perforated plastic pipe is inserted. Material is poured into such a well, which will act as a filter. It can be gravel, crushed stone, old broken bricks, slag. The well is filled to the very top, then covered with a layer and covered with soil. From above, a wooden pallet is already installed on the formwork, which has slots for water seepage. This is the most affordable, but no less effective way that will provide the necessary outflow of water.

The easiest way to ensure water supply is to install a plastic tank or an old iron barrel on the roof of the shower, paint it black to increase the rate of heating of water by sunlight, and connect a hose to it, through which water will flow into the tank. The presence of a hose for water supply is mandatory, especially if the tank volume is 100 liters or more. disadvantage tanks with natural heating is that in the cool season their use is problematic. Therefore, many prefer tanks With heated. There are three types of such systems:

Installation selected tank can be done in two ways - placing the tank directly on the cabin roof or on a special frame. The second case is rational to use if the volume of the tank is impressive, and the building may not support its weight. It is enough to make a frame from old iron pipes over the shower roof or from wooden beams. This method of placement will help to avoid significant heat loss and speed up the heating time of the water.

4. The simplest ways to organize a summer shower

It happens that the summer cottage is visited very rarely, and then, not for work, but more for recreation. In this case, the shower can be the simplest designs that you can even bring with you.

Portable shower. This design looks like a large heating pad and is made of the same material. After filling the container with water, it is twisted with a special nozzle, at the end of which there is. At the opposite end there is a loop for which it is convenient to hang the container on a tree or a hook. By placing the container in a well-lit place, the water will heat up very quickly. The volume of such a "shower" is 10-15 liters. This entails restrictions on the duration of the reception of water procedures and the number of people who can use it. But it is a very convenient and inexpensive option for one person.
shower rack- is an iron pipe on legs, which is equipped with a shower head and a hole for connecting a hose. Such a rack is convenient in that it can be placed in any convenient place and, if necessary, brought into a utility room for storage. disadvantage its is the lack of a water tank. That is, if there is no warm water and normal pressure in the system on the site, then you will have to take a cold shower.
Usage shower system. The shower rack is a metal bar to which the overhead shower and faucet are attached. In order not to bother with the arrangement of a special room for its placement, many attach the shower system directly to the wall of the house or outbuilding. For this, water is drawn out of the wall. The wall of the building is protected from moisture. You can veneer it, or with other materials that are available. For convenience, you can separate the space with a curtain, and place a wooden pallet or rubber mat on the floor.

Keep in mind that this is an option for rare use. At the time when you will not be in the country, the system can be removed, and the outlet closed with a special plug.

All of the above types of showers are good because they do not require the arrangement of a foundation and a drain. But also the disadvantage is obvious- the possibility of their use depends entirely on weather conditions.

5. Do-it-yourself summer shower made of wood

To build a wooden building you will need:

Appropriate timber;
fasteners;
Rubber hose;
Shower head or shower set;
Rubble.

Construction begins with the arrangement of a pit for water drainage. It is necessary to remove the top layer of soil with a depth of 30-40 cm and fill in the crushed stone. Thus, the soil under the shower will quickly absorb water, and the soap residue will remain on the rubble. Now you need to do formwork, to protect the wood from decay. At the corners of the pit, bricks are laid into the level. The height of the formwork must be at least 15 cm.

Now let's move on to building frame. You should start from the base. It needs boards 15 cm wide and at least 3 cm thick. The size of the base must match the size of the pit. For fastening boards, it is better to use threaded connections. Over time, the joints will not weaken even under significant weight, unlike conventional ones, which can "slip" out of the mounting hole. 4 beams with a section of 7 × 10 cm are attached to the base.

Bandaging of the frame performed using side and two transverse jumpers, which are inserted into the grooves. The same jumpers will strengthen the frame from above, which will ensure stability after attaching a heavy water tank to the roof. At your discretion, you can add a few more jumpers if you think that the design is unreliable.
For wall cladding you can use thinner wooden planks, clapboard, false timber, blockhouse and other timber. The main thing is to leave small gaps between the parts, 3-4 mm thick. This is necessary so that the planks can expand freely when wet, without deforming each other, and also shrink freely after drying. Remember that all wooden parts that will be constantly exposed to water must be carefully primed and varnished. You can soak them with drying oil or hot oil. Especially important before painting. There is a special antifungal antiseptic impregnation. You can start painting after the primer has completely dried.

When the shower is completely ready, you can hang tank. You can simply put it on the cross beams and secure with straps. If the tank is homemade, do not forget to cut a hole in the bottom for a watering can and a hole for the hose in the top. For convenience, several shelves for shampoos, soaps, etc. can be provided inside the cabin. and a couple of hooks for towels and clothes. Such a shower can be built over the weekend, and if the necessary materials are already available on the site, then the costs will be minimal. Life time wooden shower completely depends on how well you processed the wood and protected it from moisture before construction. Therefore, this point deserves special attention.

6. Polycarbonate shower enclosure

Polycarbonate is usually used to create. Therefore, for many, this material is associated with the greenhouse effect, and, consequently, with inconvenience. This opinion is erroneous. To create showers, there is a special, opaque type of polycarbonate. The most durable will be the building, which is made of metal profiles. Working with them is no more difficult than with wooden beams. A profile pipe with a cross section of 40 × 20 mm and a wall thickness of 2 mm is suitable for the construction of a frame. Also to you would need steel corner 50 × 50 mm. The number of profiles is determined depending on the area of the future shower. The only thing to consider when cutting is that the racks should be 10-15 cm larger than the estimated shower height. This is necessary so that you can concrete them and not lose in height. Work plan will look like this:

The assembly of the frame must be carried out on a flat surface. Two side drains and two overlapping crossbeams are laid on the ground. their straightness is checked. By welding, the parts are connected to each other. The second wall is assembled in the same way.
Finished structures after welding must be installed vertically at the required distance from each other and connected to each other by two transverse profiles. Keep a 90 degree angle between the walls. It is necessary to fasten the transverse strips only on one side, on the other hand the door will be welded.
After the frame is assembled, a hole of the required size is dug. The top layer of soil with a depth of 10-15 cm is removed, the concrete screed is leveled and poured. Once the screed has been poured and leveled, it is necessary to install the assembled frame on top so that the racks, which were originally longer, sink into. The level checks the verticality of the installed structure and adjusts if necessary. If the length of the legs exceeded the height of the concrete screed, it is necessary to hammer them into the ground until they are completely immersed.
To collect water, you can install a special steel pallet or provide drainage ditches during concreting.
For this design, it is better to use flat-shaped plastic water tanks. They are easy to install and, moreover, they will eliminate the need for arranging the roof.
Separately, you need to weld the door frame and weld the hinges to the frame. It is more convenient to immediately sheathe the door separately from the walls.
Sheathing the walls, fasten the polycarbonate directly to the profiles using self-tapping screws.

The color range of polycarbonate, which is used for sheathing shower enclosures, is very diverse. Therefore, the design can turn out to be very attractive. The care of this material is very simple, and in the evening it will protect you from the cool wind.

7. Country shower from corrugated board

Another good material for covering a summer shower is corrugated board. This material is highly strength and durability combined with ease. It is windproof. And when its walls heat up throughout the day, it will be comfortable to take a shower in it. Both wooden beams and metal profiles can be used as a frame. Metal, of course, is more durable. Therefore, if you still need to purchase materials, give preference to it.

The manufacture of the frame is similar to the examples from points 5 and 6. The only difference- more cross bars need to be added. This is necessary to securely fix the sheets and give the structure rigidity, since the corrugated board itself is considered a soft material. Attach sheets with . Be sure to use spacers to avoid damaging the sheet. You can cut the corrugated board with scissors for metal or using a grinder and a disk with teeth. Other circles are not recommended. During cutting, the polymer coating can burn through, which protects the coating from corrosion. The roof is also covered with corrugated board, and the tank is located under it. The gap between the walls and the tank will provide natural ventilation in the cab and prevent the formation of unpleasant odors. An unheated tank can be placed on top of the frame. Then the need to build a roof is eliminated.

8. Brick shower

This is the most labor-intensive design that is found in summer cottages with year-round living. Benefits such a soul has a lot:

With the proper approach to the construction process, such a shower will last for many years;
If you use a heated tank, you can take water treatments at any time of the year. Windproof walls also contribute to this;
It is very easy to insulate such a building by sheathing it with foam plastic on the outside;
A brick shower can consist of two zones - wet and dry, where it is much more convenient to change clothes;
A brick shower can be combined with a toilet and use one drain hole;
Strong walls and a concrete foundation will allow the use of very large water tanks without the risk of structural failure.

The disadvantages include the high costs associated with the purchase of materials and the duration of the work.

It is necessary to start construction with the arrangement foundation. Marking is carried out on the selected site and a trench is dug along the perimeter with a depth of 20 cm and a width of 40 cm. Now it is necessary to fill the trench with crushed stone or broken bricks and pour concrete with a liquid mortar so that it seeps through the stones. After the mortar dries and sets, after about a week, you can start laying the first layer of bricks. When laying, be sure control verticality after each new row. Don't forget to leave room for the door. Laying the last layer of bricks, make mortgages from thick wooden beams. A tank will be attached to them, and a roof will be laid. It is also necessary to strengthen the doorway with a metal corner or the same bar. The roof is covered with corrugated board. It is also necessary to provide a small window that will provide lighting and ventilation.

Now we need to arrange drain. It is best to equip a drainage well under the shower and lay a drain pipe from it into the sewer pit. Then a large number of people can freely use such a shower. The drainage well is covered with earth and poured with concrete, the drain pipe is first brought out. To facilitate the drain, you can fill in a slight slope towards the middle. In this case, the upper edge of the pipe must be flush with the floor. A wooden pallet with holes is laid on the concrete floor.

Optimal tank size is at least 200 liters. When placing it on the roof, provide a hole for the inlet pipe, on which the shower head will be screwed. It can be both purchased and homemade. When using a heated tank, do not forget about the supply of electricity. If you are not strong in this matter, then for your own safety, seek advice or help from specialists. Door leaf can be made of wood or OSB or chipboard sheathed with galvanized sheet. Thus, you will provide yourself with comfortable conditions for taking water procedures at any time of the year.

You can’t argue about the need to build a toilet in a summer cottage. Installing a summer shower in the country is also an equally important and necessary part of comfort. But buildings built separately take up a lot of space, and if the summer cottage is small, then they try to build them in small sizes. This option is inconvenient and uncomfortable. To solve this problem, you can build a toilet and a shower combined in one building with your own hands.

Features of design and operation

The main feature of the design of the toilet with a shower is a single building and a common dividing wall. Each room is equipped with a separate door.

The design of the toilet, separated from the shower room, is equipped with a tank for storing and supplying water. Plastic pipes supplying water are connected to this reservoir. In the shower room, the tube is connected to a watering can. Adjustment of water supply is carried out using a tap. It enters the toilet room through pipes that are connected to the washbasin and toilet bowl. In the latter case, it is supplied when installing the appropriate plumbing.

Such a construction saves the territory of the cottage

The cesspool should be located no closer than 15 m from a well or water well. The most acceptable distance is 25 m. This is necessary to avoid the possibility of foreign impurities entering the water used.

When choosing a site for the construction of this structure, it is necessary to take into account the possibility of access for sewers to pump out sewage. If the cesspool is deep and wide, it will take longer to fill. We must not forget to equip it with a hatch to drain the contents.

If the pit is located closer than 15 m from a well or water supply station, its walls and bottom must be carefully sealed.

Advantages and disadvantages over separate structures

The following criteria should be included in the parity property:

It is more expedient to design the construction of a toilet and a summer shower in one building. Each meter of land in a summer cottage is fertile soil on which you can grow vegetables, plant a tree or break a flower bed. The construction of separate structures will take up much more space than a single frame.
During the construction of individual structures, a larger amount of material is needed, since each of them requires an individual foundation, a roof and the construction of additional walls (in the combined version, only a partition wall is needed). This will also affect financial costs.
The construction of a combined toilet and shower will reduce the construction time, since in this case, work is being done for both structures at the same time.
If you build everything separately, then for both structures you need to equip your own drain pit. In addition, the walls of each of them must be reinforced with bricks, roofing felt, slate or concrete, which will additionally entail financial waste.

The disadvantages include the following points:

Unpleasant smell from the cesspool, the risk of contamination of soil and groundwater with sewage, as well as the high cost of pumping out its contents.
If you do not connect a pump to the summer shower tank, then in order to swim, you will have to carry water in buckets and pour it with your hands into a container on the roof.
In the absence of sunlight, water will not heat up well in all seasons. And in order for it to become warm on hot days, it must be prepared in advance.

Preparation of a project for a shower room combined with a bathroom

The design of a combined toilet with a shower should, above all, be functional and comfortable. It is designed in any shape, size and color. Comfortable to use will be a house with a size of 2750x200x2520 mm. In such rooms it is convenient to install rectangular benches and shelves. It is not difficult to build a frame of this form. The diagram and drawing below show the optimal parameters for the construction of this structure.

Optimal parameters presented

Here is a separate toilet with a shower in one building. The structure is located on a columnar foundation. Its dimensions make it convenient to use the structure for its intended purpose. The shower and toilet rooms are large enough to accommodate additional furniture and plumbing. In the toilet, you can place a washbasin and shelves, and in the shower room - benches and a bathing cabin. With a width of 130 cm and a length of 200 cm, each room will not be crowded. The height of 2.5 m makes it possible to use this building even for a very tall person.

The length and width of the structure is selected individually

If the door opens as shown in the drawing, then it is better to place the washbasin on the right side. In this case, when entering and leaving the toilet room, the sink will not interfere. The bench in the shower room can be installed in the same way.

Material selection

For the construction of a toilet with a shower, various materials are used. In our case, it will be a frame structure on a columnar foundation with a gable roof. For frame construction, a deep foundation is not needed, since it has a relatively small weight. Thanks to the pillars, the structure will rise above the ground. This will protect the lower trim of the structure from dampness and fungus. Water will not linger under the base. A gable roof will allow you to equip a cold attic for household needs. Water from such a roof flows faster than from a shed.

When purchasing bars and boards, you need to take into account their humidity, the degree of which should not exceed 22%. To determine this, use a needle moisture meter.

To build a country toilet with a shower, you need to prepare the following materials:

For the lower and upper strapping: four beams 2750 mm long and the same number - 2000 mm each, all with a section of 100x100 mm;
For vertical supports, bars with a section of 50x100 mm are needed, in the amount of 24 pieces, each of which is 200 cm long;
Wooden edged boards with a section of 10x100 mm, for lathing;
Bars with a section of 50x100 mm, 200 cm long, in the amount of 12 pcs. - for the roof frame;
For flooring (in the toilet), boards with a section of 40x150 mm are required in the amount of (minimum) 20 pieces. OSB sheets are used as a finishing floor;
If the floors in the shower room will be covered with tiles, then an amount equal to 2 m² is required;
Plastic pipes and sewer drain;
Concrete mix (M-200) in the amount of one and a half cube;
Plywood sheets for the manufacture of formwork;
Sand and gravel;
Metal tile.

All wooden elements must be free of knots, cracks, mold and insect damage.

Sheets of plywood, chipboard, fiberboard or OSB boards are used as a draft ceiling.
For the convenience of fastening the bars, metal corners and plates are used.

Required Tools

When building a country toilet with a shower, you will need the following tools:

Shovel bayonet and shovel;
Electric jigsaw or hacksaw;
Concrete mixer;
Electric welding machine;
Large container with water;
Buckets or a wheelbarrow for carrying concrete mix, gravel and sand;
Pliers and cutters.
Screwdriver or Phillips screwdriver.
Axe.
A hammer.
Building level.
Square.
Yardstick.
Cord.
Self-tapping screws and nails.
Plane.
Pencil.

Do-it-yourself step-by-step instructions for building

When all the necessary materials have been purchased, and the tools have been prepared for work, you can start building a country toilet with a shower:

First you need to choose the right place for this structure. The site should not be in a lowland or pit.
For this building, a columnar foundation will be used. To install it, you need to make markings on the ground with a tape measure and a cord.
After that, it is necessary to dig a pit for a cesspool. Its depth should be from 1.5 to 2 meters or more. The width and length of the pit can be different. Usually these values \u200b\u200bare equal to 100x150 cm.
The cesspool can be either round or square.
Once the hole is dug, it needs to be reinforced. To do this, we lay out the walls of the pit with bricks. We use cement mortar as an adhesive.
When the walls are ready, cover the bottom of the pit with a mixture of sand and gravel, and then concrete. The result is a concrete container that does not let the contents through its walls.
Brickwork will prevent soil and groundwater pollution
Next, you need to install a columnar foundation. To do this, we dig holes 80 cm deep and 20 cm in diameter.
Their bottom should first be covered with a 10-centimeter layer of sand, which must be compacted.
On top of the sand, pour a layer of gravel 10 cm thick, which must also be carefully compressed.
The correct foundation device will create a rigid foundation for the structure.
After that, from plywood sheets or boards, you need to make formwork for pillars, which should rise 30 cm above the ground.
Insert 3 to 5 rebars in the middle of the hole to strengthen the concrete. Connect the elements of the metal frame with a wire.
Mix concrete and pour it into the formwork. In the case of construction work in hot weather, the formwork with uncured concrete must be covered with something. If this is not done, the concrete may crack.
Leave the future foundation for a couple of days to solidify.
After the specified time, remove the formwork.
The formwork gave the column a square shape, and the metal reinforcement - strength
Next, you need to install a drain pipe under the shower. Place the drain in the specified place, and bring the other end of the pipe out.
Thanks to the removal of wastewater, moisture will not accumulate under the shower
For the lower trim, use bars with a section of 100x100 mm. Connect wooden elements in a half-tree way. Lay two layers of roofing material between the wood and the concrete pillar. Connect the frame with a concrete base to metal studs with nuts.
Use a metal channel as a frame above the cesspool.
Now you can move on to the construction of frame walls. To do this, you need to install bars with a section of 50x100 mm in the corners. Check their vertical position using the building level. As connections, vertical supports and bottom strapping, use metal corners and plates.
The ends of the beams are connected in a way in half a tree
In the frame, install two pillars 1960 mm high in place of the doors. Make the distance between them 770 mm.
After all the vertical supports are installed, it is necessary to make the upper harness from the bars with a section of 100x100 mm. Fix it to metal plates and corners with self-tapping screws.
Wooden braces temporarily strengthen the structure
On the upper harness, in the middle, install three vertical racks, on top of which fix the ridge board.
The height of the pillars will determine the angle of the roof
From boards with a section of 10x40 mm, make rafters for a gable roof with a step of 65 cm. The length of the rafter legs should be 20 cm longer than the edges of the walls of the structure. Fix all elements with self-tapping screws.
Then make a crate from the edged board in increments of 20 to 30 cm. Connect it to each other on the ridge element. The length of the boards should be selected so that they protrude by 20 cm.
The protruding parts of the crate will serve as a visor for the construction
Nail the wind boards. Cover the roof with sheets of metal tiles, which are fixed to the crate with self-tapping screws. A vapor barrier layer is not provided for this design, since it will not be heated.
Now move on to installing the floor in the toilet. Cut the bars of the desired length from boards with a thickness of 40 mm, which are fixed on the bottom trim with self-tapping screws. The length of the floor from the entrance to the pedestal with the seat is 100 cm.
Cut 5 bars 40 cm long, and use metal corners and self-tapping screws to screw them to the floorboard. Parallel to them, also install 5 vertical bars on the channel, connecting them with the same boards. Attach the same bars to the side supports (of the future toilet room) and the back ones. As a result, you should get a frame that looks like a large step. This construction of wooden beams is designed for a pedestal.
This design is reinforced with metal corners, which make it more durable.
Sheathe it with a board 20 mm thick. Then you need to insulate the walls of the toilet and shower. To do this, upholster the inner side of the frame of the structure with boards 20 mm thick. Then, between each vertical support, firmly insert foam plates 10 mm thick. Fill the gaps between them with mounting foam. It is also necessary to insulate the ceiling.
Styrofoam will reliably protect the walls from cold and heat
Then you need to upholster the outer walls and the inside of the ceiling with boards 20 mm thick.
Now you can start building the soul. In order for the water to go into the ground not under the building, you need to make a drain system. To do this, dig a small ditch in which to lay a regular sewer pipe with a diameter of 10 cm. One end of this pipe should lead to a right-angle outlet to connect to the sewer drain.
Cover it with polyethylene and attach to the pipe.
In the shower room, fill the floors with a layer of rubble. This is necessary in order to spend less concrete. Crushed stone must be positioned so that its level around the drain is less than along the perimeter.
Top with concrete and level it. As a result, the surface along the entire perimeter will have a uniform descent to the place of drainage for water. This base should be without pits and protrusions so that it flows freely.
Slope of the floor towards the drain
Wait until the concrete base hardens, then cover it with a layer of bitumen-rubber mastic. Before use, it must be heated to a liquid mass. Then, using a brush, apply to a dry and dust-free concrete floor. In the same way, it is necessary to process the lower trim of the structure.
When the mastic hardens and cools, you can proceed to install the wooden floor in the shower. To do this, it is necessary to cut boards 40 mm thick into fragments 137 cm long.
Lay the indicated boards on the strapping and fasten with self-tapping screws. In order for water to leave through the floor, it is necessary to leave a distance of 15 to 20 mm between the wood.
The gaps between the boards contribute to a better outflow of water.
Upholster the inside of the shower room with boards 20 mm thick. Treat everything with a moisture barrier. Cover the entire shower with yacht varnish in two layers. After the first time, let it dry and only then proceed to the second application. Cover all the outer walls of the building with the same boards.
Using a grinder, clean the wooden surfaces of the shower and toilet.
Then you need to secure the foundation from water flows. To do this, you need to install a drainage system. Attach drain channels to the edges of the rafters, to which drain pipes are installed on each side.
Thanks to pipes and gutters, water will not accumulate near the walls of the structure
Now you need to pay attention to ventilation in the toilet and its pit. To do this, you need to make a hole with a diameter of 10 cm in the lid of the cesspool section, into which to insert a plastic pipe. Its height must be made 70–100 cm higher than the ridge part of the roof.
For ventilation in the toilet room, it is necessary to drill a hole in its wall with a diameter of also 10 cm. Insert a plastic pipe into it and bring it out parallel to the previous one. On top of each pipe, fix umbrellas from precipitation.
Installing a ventilation system will create conditions for the release of methane
To use the country shower and toilet in the dark, it is necessary to conduct electricity. To do this, drill a hole in the partition between the toilet and the shower, into which to lead the wires and connect them to the junction box. Attach the lamp to the ceiling and screw the cover of the closed type. Put the switch on the wall. Do this in both rooms.
Wiring connections must be carefully insulated from moisture.
Now we need to install the doors. They must be treated with the same compounds and varnish as the shower room.

Installation and nuances of use in the country

When the design of the country toilet and shower has been erected, you can proceed to the direct installation of a water barrel, attaching a tube with a shower head to it. It is also necessary to install a place for a seat in the toilet.

A flat roof is most suitable for installing a water barrel. Since in our case it is gable, it is necessary to build a stand for this container. It must be made from metal pipes, a channel or a corner, using electric welding. In our case, a metal corner with sides of 50 mm and a thickness of 3 mm was used. To strengthen the structure, it is necessary to weld the amplifiers perpendicularly, every 100 cm. The total length of the frame is 4 m. The result should be a solid stand in the form of a tripod. Then, near the shower wall, drill three holes 1 m deep. Lower the tripod into them and pour concrete.

In order to save material, the frame is made of three metal corners

As a barrel for water, a plastic container 20 cm high, 100 cm long and wide was used. Due to the small height, the water in such a container heats up quite quickly from the sun's rays. Under it, you need to make a wooden frame. In our case, it is made of bars with a section of 50x50 cm, 100 cm each. It is necessary to connect their ends in a half-tree way and secure with self-tapping screws.

The shape of this tank holds a lot of water, which quickly heats up in the sun.

The wooden frame must be attached to the rack with self-tapping screws.

Now you can proceed to the installation of pipes for the shower. For this, it is better to use plastic ones with a diameter of 25 mm. Carefully drill a similar hole in the barrel, into which, using locknuts and rubber seals, install the fitting. Attach a pipe to it, in which, after 50–60 cm, connect a ball valve. It is necessary to shut off the water in case of any repair or construction work. Then drill a hole in the ceiling and stick a pipe into it. Using tees and fittings, place it in the shower. Install a watering can with a tap in the tube under the ceiling.

Now you need to install a seat in the toilet. To make an even hole, you need to attach a bucket to the middle of the pedestal and circle it with a pencil. Using a jigsaw, cut a hole in the marked area.

The bucket will hide the edges of the hole

Insert a bucket into it and fix it with self-tapping screws. In the case of using the toilet in winter, it is necessary to purchase a foam seat. In any weather, it will be warm, which is important for health.

The appearance of the finished building will fit well into the territory of the suburban area

Video: stages of construction of a country toilet with a shower under one roof

With little effort, you will build the necessary and convenient building with your own hands. Rest and living in the country will become much more comfortable. To swim after working in the garden on a hot day, you do not need to heat water and waste electricity. Thanks to various materials of exterior decoration, a toilet and a shower combined in one building will not violate the architectural ensemble of summer cottages.

Hot weather is a rarity in most of our country. On cold days, it is simply not possible to heat the water in the tank to the desired temperature. There are not many people who want to take an ice shower.

By country shower, most people mean a simple design with a barrel on the roof. Such a shower has the following disadvantages:

water in the container blooms very quickly;
there are constant problems with filling the barrel;
it is impossible to maintain the desired water temperature.

To realize the idea, you need to familiarize yourself with the advice of craftsmen. A country shower will allow the family to comfortably take water procedures.

Mobile shower works according to the following principle. Any container is installed next to the device. It can be a bucket or a bowl. Warm water is poured into it. After that, the end of the hose is lowered into the container.

The device that pumps water into the shower looks like a rug. A hose with a watering can is connected to one end of the pump. Thus, you can get a stream of water that will flow while trampling on the rug. This option is convenient because the mobile shower can be used not only in the country. The device is useful for people who want to maintain hygiene during a hike. Even in such Spartan conditions, you can wash yourself. The advantage of such a shower is the ability to adjust the temperature of the water.

How to make a summer shower in the country with your own hands - to build a reliable structure, photos and sizes are carefully selected.

When building a stationary shower, the owner needs to decide where to take the water. If the site already has a semblance of a drain pit, then you can divert water directly there. But this is not the best solution, as many people use bacteria to process wastewater. An increase in humidity will have a negative effect on the rate of purification of the contaminated liquid.

In the process of building a shower room, it is best to make a separate drain hole. To strengthen the bottom of the pit, you can use broken bricks.

The hardest thing to strengthen a hole dug in sandy soil. Its walls will be eroded by sewage during operation. Therefore, it is necessary to sheathe the walls of the sandy recess with boards.

The owner can save money when building a shower at the expense of materials. For the erection of the soul, there is no need to erect. In the construction of the foundation, foundation blocks are most often used. They are set according to the level and the shower is raised 20 cm above ground level.

This height is enough so that the treated wood does not rot. When building a base, it is not necessary to use wood. You can weld a metal case and put it on paving slabs. If desired, you can strengthen the base by pouring it with concrete.

There are no specific standards regarding the framework. The shower cabin, as a rule, consists of several parts. In one compartment you can arrange a dressing room. In another room there is a water heater. Firewood can be used as fuel.

A room for storing inventory can be attached to the shower. If you are planning a lighter structure, then you can use the following option - instead of a door, hang a curtain. This will facilitate the construction and reduce the cost of construction. Be sure to consider the height of the people who will go to the shower. The optimal height should be 2.2 meters. The width of the structure must be at least 0.9 meters. In the manufacture of the frame, you can use not only metal, but also wood.

For the manufacture of a metal frame, it is desirable to use corners with a thickness of at least 4 millimeters. The width of the shelf depends on the load. The frame will hold the water tank. What if you plan to supply a 100 liter plastic container?

In this case, it is necessary to carry out the procedure for sheathing the shower cubicle on both sides with a special clapboard. This material is considered the most practical. It has an attractive appearance and is able to withstand a humid environment for a long time. But for this it is necessary to process the lining with a special solution.

To make a metal frame, you can use scraps of metal pipes. The wall thickness of the pipe must be at least 3 mm. Otherwise, the design of the shower may not withstand the load.

You can strengthen the frame with a crate. To do this, weld additional corners to the structure. In the absence of a welding machine, it can be fixed with bolts.

To build a shower in the country with your own hands, you need to calculate the volume of the tank. For a family of 4, you will have to put a barrel with a volume of 100 liters. For the manufacture of a wooden frame, you can buy a bar. The fastening of the bars is carried out according to the tenon-groove system.

Do-it-yourself summer shower for a summer residence can be built without the use of expensive materials.

The film is considered the cheapest material for shower wall cladding. The disadvantage of this option is that the service life is too short. In a year you will have to buy a new film. Therefore, summer residents prefer more reliable materials that can last several seasons.

It is better to give preference to fabrics with impregnation. This material is used for the manufacture of awnings and tents. When buying lumber, keep in mind that fresh lining cannot be used. The reason is that any lumber undergoes shrinkage.

During the drying process, the material loses its shape and former dimensions. This affects the quality of lumber. On its surface, various defects may appear that reduce strength. Warping and cracks are the most common flaws that have a negative impact on wooden structures. In a structure built from fresh lumber, gaps may appear in a year. Do-it-yourself shower in the country, drawings, dimensions, photos are of interest to many users who wish to warn themselves against these shortcomings.

For sheathing, you can use the profiled sheet left after the construction of the fence.

Polycarbonate is a transparent material that will decorate any shower room. Do not allow cracks to appear, as dust and moisture will get into them. This is a favorable environment for the reproduction of algae. Gradually, the walls of the polycarbonate will be completely covered with greenish vegetation.

When building a shower, a ventilation system must be provided. Constant moisture can cause wood to rot. A fungus appears on the walls, destroying the structure.

Any container is suitable as a shower tank. It can be a metal or plastic barrel. However, plastic barrels heat water worse. For the middle band, this can be critical, since the water needs to be heated.

Ice water is unlikely to please the owner of a country house. Although plastic containers are cheaper than metal ones. But this is the only advantage of such barrels. It is best to install metal containers. Not only are they easier to install. The owners do not have to think about how to fix the metal barrel. In such a container, water will heat up much faster. The process of heating water can be accelerated by painting the container black. The disadvantage of this option is the appearance of rust.

People are wondering how to make a shower in the country with their own hands and how to choose the right water tank, when studying a photo of a building, you can decide on the right choice of design and water tank.

Sometimes a septic tank is installed directly under the shower. In this case, the boards are laid with a gap of 3 mm. Water will flow down and fall directly into the drain hole. In sandy soil, water will not stagnate.

But for clay soil, this version of the septic tank is not suitable. To organize a normal drain, you need to dig a hole in another place. A pallet for building a septic tank can be bought at the store. The finished pallet must be selected based on the size of the future building. It is necessary to install bars around the entire perimeter, otherwise it will hang out.

The foundation can be laid out of bricks. At the bottom of the building you need to lay a layer of gravel 15 centimeters thick. After that, a drain pipe is installed. After the concrete hardens, you can continue the construction of the shower.

Most summer residents have a desire to swim in the soul after excavation. The procedure has a positive effect on human health. Of course, you can buy a shower ready-made. But this will increase construction costs.

It is cheaper to make a shower on your own, without the help of specialists. The water must flow at a certain slope. Don't forget to waterproof your shower. With the help of a waterproofing film, you can prevent the appearance of an unpleasant odor. To do this, you need to lay a special grid. The recommended depth of the drain pit is 2 m.

To save heat, it is necessary to install a polycarbonate roof on top of the tank. It will create a greenhouse effect. A mandatory element of the tank is a sensor that informs the user about the water level. In the absence of water, they can burn out. Therefore, this parameter must be constantly monitored. To equip the floor in the shower, it is necessary to install a drain pipe.

What if there is no running water in the house? To fill the tank you have to carry water in buckets. This is way too labor intensive. Before building a shower, think about the water supply. If you have running water, you can fill the tank quickly enough. Just open the faucet and wait until the container is filled to a certain level.

Advanced home owners have come up with a scheme that automates this process. This can be done using the float system. It is imperative to provide for the installation of a system that is designed to drain excess water. According to the law of physics, the warmest water is on top. Therefore, water intake is carried out from above. At the bottom of the tank, you can install a hose for draining water into the sewer.

Of course, you can use the energy of the sun. In this case, you do not have to spend money on electricity. However, this method has a significant drawback. With the help of the sun it is difficult to warm up a large amount of liquid. In addition, this method can not be implemented in all climatic zones.

In this case, you can use heating using devices that use electricity. The heaters can heat the water to the desired temperature. A person who decides to take a shower sets the temperature himself.

In order for the warmest water to enter the watering can, it is necessary to attach a piece of foam to the hose. Therefore, water is taken from above. To speed up the heating of water, you can make a coil.

A shower can be built at the farthest end of the site, near the fence. On sandy soil, water will not linger in the sump. Due to the rapid absorption of water, rotting of wooden materials that are used as sheathing materials can be avoided.

When building a shower near the fence, the owner gets an advantage. In this case, it is enough to install 3 pillars. So that the pillars do not stagger, it is necessary to dig holes 78 cm deep, cover everything with rubble, tamp and pour concrete.

After leveling the floor, wood processing begins. You can buy aspen boards and impregnate them with a protective layer. Then the lumber is processed with a grinder.

When installing shelves, consider the weight of the barrel. It must withstand a load of at least 100 kg. Corners will rust during operation. To increase the service life of the metal frame, paint with a special paint that can be applied directly to rust.

To install polycarbonate, you can use self-tapping screws. Violation of technology can lead to cracking of polycarbonate sheets in sunny weather.

Therefore, people prefer a summer shower equipped with a heating system. To obtain a convenient and practical design, great attention must be paid to the construction site. A draft after a shower can lead to a cold. With the help of heating elements, you can heat water to a certain temperature even in cold weather.

There must be a distance of at least 5 meters between the shower structure and the drain pit.
You can proceed to earthworks only after calculating the volume of the drain pit. One person accounts for 0.5 cubic meters.
When laying pipes, observe a slope of 3 to 5 degrees.

The simplest design of the drain pit is considered to be the shape of a cube. But this option has a significant drawback. The walls of such a pit lose their strength.

It is best to use a cylindrical drain pit. In this case, the load is distributed evenly and the probability of failure is reduced. In order to increase the life of the shower structure, it is necessary to use bio-based products. Many bacteria are able to process waste. Water will quickly soak into the ground.

The advantage of a plastic tank is that the water does not bloom in them, the joints do not rust, and the properties of the water do not change.

Electric heaters can be installed with your own hands. However, it is best to purchase a ready-made tank equipped with a built-in heater. In this case, the system controls all parameters automatically. The unit has a control panel and switches itself off in case of emergencies.

Humidity in the shower. Therefore, during construction, the following points must be taken into account: