Plan of a wooden house from a log 6 8. Projects of wooden houses. Terms of construction of houses from logs

Save on building a house without compromising its quality: choose a standard project. On the page we have placed a catalog of wooden house projects developed by our architects and repeatedly implemented by builders.

We use only northern wood species, controlling every stage of building a house. The construction is carried out on a turnkey basis and includes all stages, from the installation of a log house and the construction of a foundation, ending with finishing and communications.

Catalog of projects from rounded logs or manual felling

In the catalog you will find:

• compact one-story houses;
• many projects of two-story wooden houses with a balcony;
• spacious estates with an attic;
• bathhouses with a porch or terrace;
• projects of wooden houses with a garage.

You can look at the layout of the house or get acquainted with its parameters by clicking on the link of the selected project. Each house can be built from rounded or chopped logs (Canadian or Russian felling).

The choice of wood for construction

We build from Kirov pine, cedar and larch. We have two own production facilities located in Kirov and Sayanogorsk (Khakassia). When booking a forest during the development of a project, it is possible to choose the region of cedar harvesting: the available logging geography is the whole of Siberia!

A rational solution is a combination of different types of wood:

Mortgage crown - Siberian larch. This durable and moisture-resistant wood will last almost forever, you will be relieved of problems with the blind crown.

Walls made of Kirov pine - this solution will reduce the cost of a wall set by 15-20% compared to cedar of the same diameter.

Above - a pair of cedar crowns that will improve the atmosphere in a pine log house, enrich the air with useful phytoncides and aroma.

We have 20 years of experience working with wood, we have permanent teams and hereditary cutters from Siberia. Our chief architect has been working with our company since 2002, all of his design and planning decisions are carefully thought out and calculated!

Strapping and floor joists

Walls and partitions

Array. When building a house from an array:

• The outer walls of the first floor are made of the material selected by the customer for construction (solid timber, glued timber, logs).
• The internal partitions of the first floor are framed, sheathed with class "B" clapboard on both sides.
• Frame partitions are installed with a sedimentary gap for the possibility of shrinkage of the walls of the house.

Frame. With frame assembly technology at home:

• The frame of the outer walls is made of edged boards 50x150 (thickness) mm.
• The frame of the internal partitions is made of edged boards 50x100 (thickness) mm.
• External walls and internal partitions are sheathed with clapboard class "B" on both sides.
• The outer walls are insulated with glass-staple fiber 150 mm thick.
• On the outside of the walls, the insulation is laid with a wind- and moisture-proof vapor-permeable membrane, on the inside - with a vapor barrier membrane.
• Insulation of internal partitions is not carried out.
• The internal height of the premises on the first floor is from 2.35 to 2.4 m.

Floors and joists

• Regardless of the construction technology, the floors of the first floor are double.
• The draft floor is assembled from edged boards with a thickness of 19-20 mm, based on the cranial bars of the floor beams.
• The finished floor is assembled from a fine planed grooved board with a thickness of 30-40mm.
• Floor logs are made with a section of 50x150 mm, floor beams are installed in increments of 0.5 m.
• The floors of the first floor are insulated with glass-staple fiber 50 mm thick, the insulation is laid on both sides: from below - with a wind and moisture-proof vapor-permeable membrane, from above - with a vapor barrier membrane.

Interfloor ceilings

• Interfloor floor beams are made of boards with a section of 50x150mm.
• The beams are installed in increments of 0.5 m and rest on the outer walls of the house and the support beam.
• The ceiling of the interior premises of the first floor is hemmed with a class "B" clapboard from the bottom of the interfloor floor beams.
• Insulation is laid between the beams - glass-staple fiber 50 mm thick, insulation is laid on both sides with a vapor barrier membrane.

Stairs

• A staircase is installed inside the house, the main elements of which (steps, stringers, bowstrings) are made of wooden furniture panels.
• Useful width of steps of a ladder - 830 mm.
• The stairs are assembled on self-tapping screws using metal corners for fastening winder steps and other structural elements.

Attic

• The attic in the basic configuration is one common room without partitions.
• Outside and inside, including the ceiling, sheathed with class "B" clapboard. Warming is not performed.
• The floor of the attic is assembled from a floor planed grooved board 30-40 mm. Ceiling height 2.4 m.

Doors and windows

• Entrance and interior panel doors are installed in the house.
• Paneled doors are not equipped with handles for opening and locks.
• Windows are installed wooden double glazing size 1.2x1.2.

Roof

• Changing the shape of the roof from a gable to a broken one is free of charge.
• Roofing - galvanized steel in the form of corrugated sheets.

Delivery

• Delivery up to 100 km from our production base in Bear Lakes is free.

Built from a log, it has dimensions of 6x8. It disposes to itself and allows even a large family to stay in it. The house has two floors, is comfortable, practical and has a charming appearance. It will be an ideal place for a summer holiday with the whole family or with friends. But in such a house you can not only relax, but also live permanently. Especially there is a house to be erected, for example, on the lake.

6x8 houses have some advantages over smaller buildings. In such a house, in addition to the territories separately designated for each family member, there is also an area for family gatherings. Such a house costs a little more, but its comfort and convenience is much higher.

This project of the house is distinguished by the presence of a large living room, bright and comfortable. You will be happy to receive guests here. The kitchen, located on the ground floor of the house, is also large and bright. All rooms can be accessed directly from the hallway. Also on the first floor there is a convenient sanitary unit.

The wooden staircase leading from the living room to the second floor is comfortable and functional. It leads to a free hall on the second floor. There are also two bedrooms.

The project of this house, made of logs, will help to realize all your dreams.

Equipment

Strapping and floor joists

Walls and partitions

Array. When building a house from an array:

• The outer walls of the first floor are made of the material selected by the customer for construction (solid timber, glued timber, logs).
• The internal partitions of the first floor are framed, sheathed with class "B" clapboard on both sides.
• Frame partitions are installed with a sedimentary gap for the possibility of shrinkage of the walls of the house.

Frame. With frame assembly technology at home:

• The frame of the outer walls is made of edged boards 50x150 (thickness) mm.
• The frame of the internal partitions is made of edged boards 50x100 (thickness) mm.
• External walls and internal partitions are sheathed with clapboard class "B" on both sides.
• The outer walls are insulated with glass-staple fiber 150 mm thick.
• On the outside of the walls, the insulation is laid with a wind- and moisture-proof vapor-permeable membrane, on the inside - with a vapor barrier membrane.
• Insulation of internal partitions is not carried out.
• The internal height of the premises on the first floor is from 2.35 to 2.4 m.

Floors and joists

• Regardless of the construction technology, the floors of the first floor are double.
• The draft floor is assembled from edged boards with a thickness of 19-20 mm, based on the cranial bars of the floor beams.
• The finished floor is assembled from a fine planed grooved board with a thickness of 30-40mm.
• Floor logs are made with a section of 50x150 mm, floor beams are installed in increments of 0.5 m.
• The floors of the first floor are insulated with glass-staple fiber 50 mm thick, the insulation is laid on both sides: from below - with a wind and moisture-proof vapor-permeable membrane, from above - with a vapor barrier membrane.

Interfloor ceilings

• Interfloor floor beams are made of boards with a section of 50x150mm.
• The beams are installed in increments of 0.5 m and rest on the outer walls of the house and the support beam.
• The ceiling of the interior premises of the first floor is hemmed with a class "B" clapboard from the bottom of the interfloor floor beams.
• Insulation is laid between the beams - glass-staple fiber 50 mm thick, insulation is laid on both sides with a vapor barrier membrane.

Stairs

• A staircase is installed inside the house, the main elements of which (steps, stringers, bowstrings) are made of wooden furniture panels.
• Useful width of steps of a ladder - 830 mm.
• The stairs are assembled on self-tapping screws using metal corners for fastening winder steps and other structural elements.

Attic

• The attic in the basic configuration is one common room without partitions.
• Outside and inside, including the ceiling, sheathed with class "B" clapboard. Warming is not performed.
• The floor of the attic is assembled from a floor planed grooved board 30-40 mm. Ceiling height 2.4 m.

Doors and windows

• Entrance and interior panel doors are installed in the house.
• Paneled doors are not equipped with handles for opening and locks.
• Windows are installed wooden double glazing size 1.2x1.2.

Roof

• Changing the shape of the roof from a gable to a broken one is free of charge.
• Roofing - galvanized steel in the form of corrugated sheets.

Delivery

• Delivery up to 100 km from our production base in Bear Lakes is free.

• The ceiling height of the 1st floor is 2.70 m, the 2nd floor is 2.50 m.
• The outer walls of the house are made of round logs 220 mm. Cutting the corners of the house into a bowl.
• Antiseptic filling crown.
• Floor and ceiling beams - timber 100x150 mm, with a step of 60 cm.
• The capital internal walls of the 1st floor are round logs 220 mm.
• The main internal walls of the 2nd floor are round logs 220 mm.
• The pediments are made of rounded logs 220 mm.
• The rafter system is a beam 150x50 mm, with a step of 60 cm. Fastening the rafters in the ridge to metal plates.
• Lathing - edged board 150x25 mm.
• Ruberoid - for the starting roof. Installation with metal tiles, ondulin, profiled sheets is possible.
• Jute is a natural, environmentally friendly fibre. Mezhventsovy insulation is placed between the bars.
• Consumables - nails, staples, antiseptic, etc.
• A set of birch dowels, for connecting the walls of the house - are installed in a checkerboard pattern.
• Delivery in the Moscow region - FREE OF CHARGE!
• Unloading and storage of material at the customer's site.
• Installation of the house under the roof.
• Warranty obligations for the erected structure and all general construction works performed by our company are 1 year.
• At the request of the customer, it is possible to change the configuration, both in the direction of decreasing and increasing the cost of the project.

The price does not include floors, ceilings, windows, doors, stairs, roof insulation and other finishing works!!! Finishing is carried out 6-9 months after the installation of the house under the roof, after shrinkage and drying of the walls of the house.

A country house made of round logs 6x8 can be built on a small plot. The one-story option will become a cozy cottage, and the two-story cottage will become a comfortable place for family living. The variety of architectural projects makes it possible to choose the type of building that suits personal preferences and needs. It can be a log house in the form of a tower, a house with an attic, a carved porch or a terrace.

Why log houses are popular

The rounded log is a structural material obtained from a tree trunk by high-tech machine processing. The quality of wood determines the performance of the future structure. It is important that logs of proper quality are selected for the construction of a residential facility (the assessment is carried out according to the parameters of moisture content, uniformity and wood structure).

The price of a 6x8 house made of rounded logs depends on the quality of the materials (the cost of wood of different species varies over a wide range), the complexity of the project and the technologies used. Subject to building regulations and rules, the construction of high-quality logs will become a reliable, durable, comfortable country cottage for living. The advantages of living in a log house are the following points:

• favorable microclimate;
• minimal heating costs (the tree prevents the leakage of warm air);
• no need to use decorative finishes (smooth log walls look beautiful on their own);
• low cost of construction (compared to stone and brick houses).

A house made of round logs of larch, cedar and oak is not inferior in strength and durability to stone buildings.

Terms of construction of houses from logs

The construction of a log house takes a little time - 45-60 days in the warm season, in the absence of extreme weather conditions. However, how many months it will take for the building to be ready for some internal work (for example, the installation of stairs or the installation of decorative structures) depends on many factors:

1. The time of the year during which construction takes place.
2. Log characteristics (moisture level).
3. Type of wood.
4. Climatic conditions.

Works in the field of wooden architecture should be carried out by experienced craftsmen who know the features of shrinkage of coniferous and hardwood structures. Wood is a living material that changes its properties depending on external conditions.

The compression of wood occurs as the material dries - the period of primary stabilization of the structure from a log of natural moisture is at least 7 months. Thus, a house built on a turnkey basis will shrink for a long time, although this process will be less and less active every year.

To prevent deformations of the structure, special technologies are used - the installation of casing boxes in doorways and window frames, as well as compensators for vertical supports. Adjustment of stabilizing structures is carried out monthly.

The cost of a log house (6x8) of a simple design is 2-4 million rubles. Of course, the price increases many times when using valuable wood. As for the comfort of living, this factor depends entirely on the punctuality of compliance with building technologies and the quality of the construction material. On our website you can see the projects of houses made of logs 6x8.