Adhesive PVC tiles and durable quartz vinyl tiles - universal flooring solutions for residential and commercial spaces in Moscow: affordable price and practicality. Thanks to the special multilayer structure and protective layer, quartz vinyl is wear-resistant, can withstand heavy loads, and does not require special care. The surface imitates wooden, ceramic or stone floors; the correct geometry and specially selected textures create various visual effects. At the same time, prices for PVC floors are 2-3 times lower compared to parquet boards, wooden parquet or cork floors!
Please note that the site presents not only adhesive PVC tiles, but a wide range of different vinyl floors:
- Easy to install interlocking glueless laminate.
- Unique woven vinyl that imitates the texture of fabrics.
In the Polov salons there are free consultations on the choice of flooring: ask questions by phone at any convenient time, and follow the special offers in the news section!
Advantages of PVC floor tiles
- Wear resistance. PVC floor tiles are durable and hard, withstand mechanical damage, resistant to abrasion, scratches, and cracks.
- Maintainability. An advantageous feature of the modular format: if the product is damaged, the panel can be easily dismantled and a new piece of flooring can be installed in its place.
- Soundproofing. Polyvinyl chloride flooring is laid end-to-end: thanks to protected seams and homogeneous material, sound insulation characteristics are improved.
- Durability. Quartz vinyl coverings are durable due to their practicality, moisture resistance and the ability to spot replace floor elements without re-flooring the room.
- Appearance. Single-color designs, diverse compositions, creating a three-dimensional effect, imitation of natural materials and other design techniques are available along with modern flooring material!
- Easy installation. Installation on any surface with minimal preparation, safe vinyl glue is used, no special knowledge or tools are required, all you need is a knife, roller, ruler, sponge!
- Convenient transportation. Unlike massive parquet boards with lamellas up to 2 meters in length, PVC floor tiles - square or rectangular - do not exceed 100 cm on the long side!
- Price per m2. You can buy vinyl tiles 2-3 times cheaper than similar-sized wooden parquet, granite or stone.
Quartz vinyl has only 2 conditional disadvantages: the surface is vulnerable to solvents or aggressive chemicals, and the origin of the material is synthetic. However, this does not prevent the use of vinyl as flooring for residential or utility rooms in apartments and country houses: PVC floors meet all environmental standards.
Typical Application
Household premises
Quartz vinyl floor tiles are unrivaled where durable, moisture-proof and wear-resistant coatings are required. A bathroom, shower room, toilet, kitchen, dining room, as well as a balcony or loggia are typical places for which practical polyvinyl chloride with the addition of quartz is chosen.
Utility rooms
Basements, wet warehouses, utility rooms - where concrete cracks after a few years, parquet absorbs moisture and delaminates, and the use of ceramic or porcelain tiles is impractical. Choose quartz vinyl tiles!
✔ Learn more about the benefits of quartz vinyl.
Temporary floor
Solid floors in museums, exhibition halls, galleries and other similar premises can be irreparably damaged at events with large crowds of visitors or demonstrations of heavy, large exhibits: monumental sculptures, interior elements, industrial equipment, cars or heavy special equipment. Free-standing PVC floor tiles have a prefabricated structure that will protect expensive floors during shows!
PVC tiles are laid directly on the subfloor, without a backing. Concrete base, plywood, fiberboard, chipboard, old linoleum or tiles - self-adhesive quartz vinyl fits perfectly with any materials if the surface is first leveled, treated with a primer, and dried thoroughly.
Material stock
We recommend purchasing 2-3 m2 more PVC tiles than the estimated area of the room. The material has to be cut off near the walls, this increases consumption. In addition, it is necessary to have a supply of vinyl in case of unexpected damage to the surface during operation.
Laying features
PVC tiles are laid at air temperatures above 18-20°C and pre-conditioned for at least 24 hours indoors. To accurately fit the design, you need to make cuts along the front side. Before installation, all skirting boards are removed or sealed on the outside with special tape. If you choose non-self-adhesive, you will need to additionally purchase PVC adhesive or double-sided adhesive tape. Floors can be used 48 hours after installation.
Main stages of installation
- Preparation of the rough base - leveling, processing, drying.
- Laying axial tiles, determining the central point of the floor in the room.
- Installation of the remaining fragments of the floor covering.
- The base and tiles are coated with glue, compaction is carried out with a roller or rubber mallet.
- Excess glue must be cleaned off so as not to contaminate the coating.
- Self-adhesive tiles are even easier to install - just remove the protection from the adhesive side.
Vinyl Flooring Manufacturers
Moisture-resistant vinyl tiles of class 43 with decors imitating the texture of various types of wood, natural stone, parquet. The Aquaflor range also includes a unique one with a middle layer of marble powder.
Exclusive PVC tiles at a price from the manufacturer Tarkett - a stylish combination of wood or stone textures.
Nothing extra, only quality and safety - Decoria vinyl floor tiles. Free delivery throughout Russia!
Quartz vinyl flooring ReFloor - affordable price, increased mechanical strength with a total thickness of only 2 mm!
Anti-slip surface and improved performance characteristics - adhesive quartz vinyl is suitable for home and office, as well as a new product for 2018 - vinyl tiles with bright wood-like decors.
Eco-friendly PVC floor tiles Art House - containing quartz sand, no plasticizers or formaldehyde used in production - high-quality coating for floors and walls.
Modular PVC (polyvinyl chloride) flooring is an innovative phenomenon in the world of building finishing materials. The modules allow you to lay the floor using the standard square method, lay out lines, markings, a checkerboard or a more complex mosaic. It began to be produced on the territory of the Russian Federation about 10 years ago, although in Western countries it has been used for 40 years.
Application of coating
Due to their high level of wear resistance, modular PVC floor tiles are mostly used for the floors of industrial, warehouse, sports and commercial premises, but are also often used for domestic ones. Prefabricated polymer coating has a low cost, like linoleum, but, unlike it, it is much more practical and durable. In everyday life, it is used for bathrooms and kitchens because it has a water-repellent effect, as well as increased resistance to the influence of aggressive household chemicals.
In production, modular PVC coating is installed in workshops of various purposes: metalworking, food, packaging, pharmacological, assembly plants, warehouses and loading terminals. Tiles of this kind are used in service stations, private garages, car washes, car parks, corridors of train stations and airports, baggage terminals, gyms, supermarkets and exhibition centers. These modules are manufactured in a wide range of colors and have different textures, so they can be an excellent addition to the overall interior of the room.
10 reasons why you should buy modular PVC flooring
- Quick installation. Installation of the coating in a room of 50 m2 by one person will take only a couple of hours. The premises can be used for their intended purpose immediately after completion of the work. The work process does not require the use of special tools and skills.
- Maintainability. Modular PVC floor covering, in case of damage to its sectors, can be easily replaced with another one, and in minutes your floors will be as good as new.
- Hygiene. They do not absorb water, which prevents the formation of fungi and mold.
- The solidity of the product makes it virtually invulnerable to mechanical damage. Heavy industrial, warehouse or commercial equipment, barbells, dumbbells, car wheels, large flow of people and other factors do not affect its original appearance. The coating is dyed in the paste, so the color does not rub off.
- The geometrically correct shape of PVC floor tiles allows you to create compositions of any colors and variations provided manufacturer (photo examples can be seen here) and those invented by you.
- Modular PVC floorsdo not split, unlike ceramic tiles, do not crack or peel, like concrete or self-leveling floors when heavy objects fall on them.
- This coating has a sound-proofing and vibration-absorbing effect, which is indispensable in production.
- Such floors are quite durable at different temperatures (from -40 to +110 0 WITH). This allows them to be used not only indoors, but also in open areas. The lowest operating temperature is -40 0 C, but at such low rates the working surface should not be subjected to serious mechanical stress.
- It has a dielectric effect that does not support combustion.
- The modules are recyclable and do not pollute the environment after disposal.
In the interactive catalog you can find anymodular PVC coverings, pricewhich fully corresponds to the declared quality.
Features of installation and operation of PVC floor coverings
Modular PVC flooringcan be repeatedly mounted and dismantled to be moved to another location - this is its main advantage. In addition, it can cover concrete, tiles, self-leveling floors, wood and asphalt, which distinguishes it from natural materials. Easily transported and subject to partial replacement in case of failure. For most types of installation, it does not require the use of adhesives and can be installed not only on horizontal surfaces, therefore it is often used for laying ramps or speed bumps as it has anti-resistance characteristics.
Usually, modular PVC floors 50×50are mounted on top of the main floor using the “puzzle” method using an ordinary rubber hammer to securely fix the tiles. It is better to start installation from the center of the room, because excess modules can be easily cut off with a carpenter's knife or an electric jigsaw. The role of the sealant is performed by a special glue, which is applied to the base with a notched trowel. Sizing is recommended in some cases.
Modular PVC floorsThey are quite easy to use and do not require special care. To maintain a factory appearance, it is enough to regularly remove metal shavings, construction and other debris from their surface. The scrubber dryer can be used on such surfaces without restrictions. Grease stains should be removed with any detergents that do not contain acetone. To be on the safe side, the surface can be treated with acrylic industrial polish, applying several layers of it to the floors.
The service life with active use of modular coatings in industrial conditions without replacement is at least 8 years, in average conditions - more than 15.
Where can I buy modular PVC floor coverings?
In case you decidebuy modular PVC floor coverings, Moscowprovides such an opportunity. Our company offers a wide range of floor coverings for various rooms and tasks, price which will pleasantly surprise all clients. By filling out the feedback form on the site, visitors can get answers to all their questions before purchase modular floors. The company’s specialists will provide competent advice and conduct a technical examination of the customer’s premises to select the optimal coating option.
Delivery of selected goods is carried out not only in Moscow and the region, but also throughout Russia by any means convenient for the buyer. You can find out more detailed information by calling the indicated numbers or writing an email.
For the final decorative finishing of the floor, many materials are used: linoleum, parquet boards, ceramic tiles, laminate. These facings have been around for a long time. They have managed to win the trust of millions of consumers thanks to their excellent performance. However, recently many have begun to prefer polyvinyl chloride (PVC) floor tiles. The coating is highly wear-resistant, environmentally friendly and affordable.
What is it?
Polyvinyl chloride tiles are a floor covering that recently appeared on the market. Visually, it is similar to premium linoleum, which is why it received its second name – linoleum. The material goes on sale in the form of rectangles or squares. Due to this feature, the coating is easy to install. PVC tiles are made from the same materials as linoleum.
It has the following structural structure:
- main layer made of plastic;
- fiberglass inserts designed to stabilize the dimensions of the material;
- decorative layer with a pattern, responsible for the aesthetic characteristics of the product;
- a specialized protective shell that protects the coating from mechanical stress.
In the manufacture of linoleum tiles, vinyl, resins and stabilizers are used. Thanks to such substances, the coating has a high density, but is also flexible and elastic.
The thickness of the finished cladding ranges from 0.5 to 3.5 mm. Manufacturers also produce vinyl tiles with one layer 1.5-2.5 mm thick.
Scope of application
Polyvinyl chloride tiles are used for covering floor surfaces in rooms for any purpose. It can be used when installing a warm water floor indoors, which is especially important for private country buildings and apartments located on the ground floors. PVC coating can also be used for finishing:
- Bathrooms and kitchens. The material will be a wonderful addition to these rooms. Thanks to its harmlessness and high resistance to high humidity, the tiles will retain their aesthetics for a long time in difficult conditions.
- Bedrooms, living rooms, corridors. Due to its decorative nature, the material will fit perfectly into any room. A wide range of products allows you to choose flooring to suit any room interior.
- Children's room. This cladding does not emit harmful substances during operation, so it is perfect for finishing rooms where children live. PVC tiles for a children's room will be the best solution due to their environmental friendliness.
- Commercial objects, office premises, warehouses and garages. Plastic tile flooring is durable, making it suitable for use in industrial workshops, exhibition centers, and retail outlets.
For finishing living rooms and offices, you can purchase household tiles that have excellent aesthetic qualities, but mediocre technical parameters. In rooms with average traffic, it is allowed to use semi-commercial material. Floors in high traffic areas should only be finished with commercial cladding.
If you plan to lay such a coating in a production workshop, then you should take a closer look at specialized linoleum tiles. It may have fire-resistant properties, resistance to acids or alkalis, depending on the modification.
Features and Specifications
Manufacturers of PVC tiles produce two types of material: the first is homogeneous, the second is heterogeneous. Homogeneous cladding consists of a single layer. The picture of this material is made in its entire thickness, so that the picture does not wear out even with intensive and long-term use. Homogeneous coating is available in various colors. However, the patterns on such coatings are practically the same.
The heterogeneous material has several layers, the main one of which is protective. The second is responsible for decorativeness: it affects the color and pattern of the tiles.
Heterogeneous coating can imitate:
- wooden floor;
- flooring made of natural or artificial stone;
- grass lawn.
Products made from polyvinyl chloride are highly resistant to various types of alkalis, mineral oils, and solvents. They are not afraid of temperature changes and are able to maintain their original appearance at temperatures from -30 to +60 degrees. The structural density of the material does not exceed 1.4 g/cubic meter. cm, elasticity is in the range of 210-390%.
Thanks to these technical parameters, PVC tiles are a serious “competitor” to floor coverings made of linoleum, parquet or laminate. In terms of cost, it is more profitable than wooden cladding, in terms of installation it is more convenient than linoleum in rolls, and warmer than ceramic tiles and stone.
Species
Manufacturers offer several types of PVC tiles. To decide which type of material is better, you need to understand the features of each of them. So, the following types of linoleum tiles are offered on the market:
- Self-adhesive. Self-adhesive tiles are the most popular material. Such products are in mass demand due to their simple installation. Thanks to the self-adhesive base, it is possible to lay the flooring on a prepared non-flowing surface;
- Glue. Adhesive tiles are a material that does not have a locking system or an adhesive layer. To install the products, a specialized adhesive for laying PVC flooring is used. It reliably adheres the material to the rough coating;
- Modular with locking connection. To lay modular tiles, a tongue-and-groove type locking connection is used. To install the flooring, you do not need to apply glue to the underside of the material. The prefabricated coating is ideal for finishing “floating” floors, as well as for rooms with a high level of traffic.
Pros and cons
The main advantage of polyvinyl chloride tiles is their high wear resistance. The material is capable of maintaining its aesthetic qualities for 10 years. Even if you accidentally damage a piece of flooring, you can always quickly replace it with your own hands.
To restore the surface, you do not have to dismantle the entire front finish. You just need to remove the damaged fragment and replace it with a new one.
Other advantages of the material include:
- Ease of transportation. The tiles are light in weight. It is supplied to the market in the form of rectangles or squares, making it convenient to deliver to the desired location.
- Original appearance and attractive design. Among the extensive range of products, even the most fastidious consumer will be able to find the right option.
- High moisture resistance.
- Elasticity and hardness. Thanks to these properties, the tile is able to withstand severe force loads.
- Excellent sound and heat insulation.
- Easy installation. Even a person without experience can lay the material on the base. Installation does not require specialized knowledge, special skills or abilities.
- Resistant to mold formation, harmful to human health and pets. Due to their resistance to fungus, the tiles can be laid in damp and unventilated areas without fear.
- Easy to care for. PVC tiles do not absorb moisture and do not interact with detergents or alkaline compounds. The surface is easy to clean with a damp cloth and any household cleaning products.
- Affordable price. PVC flooring has a lower price than laminate or porcelain tiles, making this material a budget solution.
- Comfort. The tile is soft and smooth to the touch, it is pleasant and warm. When wet, the material does not slip, which is especially important for kitchens and bathrooms.
- Environmental friendliness. Although the material is made from synthetic components, it does not emit odor or dangerous chemical elements.
Like all flooring materials, PVC tiles are not without their drawbacks. Its negative aspects are unnaturalness and a high risk of fading of the design due to prolonged exposure to sunlight. Another significant disadvantage of flooring is the need to carefully level the base before installation. If there are bumps, individual fragments of the coating may come off, which will require surface repair. Also, when installing tiles, water should not be allowed to penetrate under the flooring. If liquid gets in, there is a high risk of fungus developing and multiplying.
In general, the disadvantages of the material are not so significant. If the installation rules are followed, the coating will last for more than one year.
Size selection
Polyvinyl tiles are available in rolls, in the form of square or rectangular panels.
The following sizes of piece products are considered the most popular:
- 30x30 cm;
- 50x50 cm;
- 65x65 cm.
It is advisable to choose large panels for spacious rooms. Small and medium tiles are perfect for small rooms. When choosing the thickness of the material, keep in mind that the durability of the finished coating will depend on this parameter. A thin product can quickly lose its aesthetics. If you plan to lay PVC tiles in a corridor or rooms with high traffic, it is advisable to take a closer look at options with a thickness of 5 mm. It is best to give preference to heterogeneous materials. They will last longer.
Before purchasing, you need to calculate the number of tiles required. To do this, you need to multiply the length and width of the room to find the area of the room. After this, you can go to the store, choose the tile you like and find out its size. To calculate the number of tiles required, you need to divide the area of the room by the area of one panel.
If you want the coating to last as long as possible, study the selection tips. Thanks to the recommendations, every buyer will be able to purchase not only a beautiful, but also a high-quality product.
The question of how to choose PVC tiles often arises among people who decide to renovate their apartment. Most people, when purchasing material, give preference to a beautiful design, not paying attention to the technical parameters. This is the wrong approach. When choosing flooring, first of all you need to look at the product labeling. As a rule, it indicates the wear resistance class, the number of layers, the type of base and the degree of abrasion.
Linoleum tiles have several wear resistance classes:
- 21-23 (household);
- 31-33 (commercial);
- 41-43 (special).
The higher the degree of wear resistance, the stronger and more reliable the material will be, but such products will also cost more. You also need to pay attention to abrasion. When marking, this indicator is indicated by the Latin symbols T, P, M, F (in descending order of stability).
In the bedroom, where the load on the floor is minimal, it is allowed to lay material from group F. For kitchens or other rooms with high traffic, tiles with abrasion degree T are suitable.
In addition, do not forget to evaluate the external characteristics of the product. The range of materials is quite wide. If desired, you can choose options with geometric images and plain variations. When choosing a color, you need to focus on the design of the room, shades of wallpaper, furniture and decor.
To decorate small rooms, give preference to light flooring. Tiles in white, beige and cream tones can visually expand the space. Light material is a winning option for small rooms, dark material is relevant for decorating large rooms. When choosing tiles, do not hesitate to feel the products. This way, you can buy a sample that is suitable both in shade and calibration, and in texture.
Installation procedure
To carry out installation as efficiently, quickly and accurately as possible, you need to know how and in what cases to act.
Preparation for installation
To ensure that the floor covering does not have to be changed next year, it is necessary to adhere to the technology of installing PVC tiles. Before laying the flooring, read the instructions and technical features of the product being installed.
Before installing vinyl tiles, you need to carefully prepare the base:
- Install the concrete screed. Before laying the material, make sure the screed is dry using a hygrometer. The humidity indicator should not be more than 3%. At high values of this parameter, the risks of premature destruction of polyvinyl chloride panels increase.
- Assess the surface of the subfloor. It should be perfectly smooth. The presence of cracks, bumps and other defects is unacceptable. If the surface is not level enough, use specialized compounds to level the floor.
- When installing panels on a wooden base, make sure there are no nails or protrusions. Seal the joints between the boards using putty.
- Dismantle the previously laid covering (carpet, linoleum or other materials). If necessary, install a new screed and level the base.
- The last preparatory stage is treating the base with a suitable soil composition. Thanks to such actions, the surface will become rigid. Its absorbent properties will also be reduced, thereby reducing glue consumption.
All work on the preparation and installation of the material must be carried out at a temperature of 15-25 degrees.
Adhesive tiles
Before laying the products you need to make markings. To do this, use a tape measure and a pencil to draw two lines intersecting in the center of the room. Draw a line through the middle parallel to the two longitudinal walls. Refer to this marking when installing the first two rows of PVC panels. After the preparatory work, you can begin installation.
For work you will need:
- adhesive composition;
- containers for preparing glue;
- spatula;
- construction knife for cutting material;
- sponge;
- roller
Prepare the adhesive composition according to the instructions (indicated by the manufacturer on the packaging with the mixture). Apply the prepared solution onto the dry base with a notched trowel. Level the composition over the surface of the coating (the area to be treated should not exceed 1 sq. m) and lay the tiles. Apply it carefully, making sure that the glue does not get on the front side of the PVC panel. Try to lay the products evenly, without gaps or displacements. After laying each piece of trim, roll the material with a roller. This will remove any air bubbles that have formed between the subfloor and the PVC tiles. Remove excess glue that came out during rolling with a sponge or soft rag.
You can walk on the installed surface after 24 hours. After this time, you can place furniture items on the floor. To eliminate the risk of damage to the tiles by furniture, it is recommended to glue felt pads to the legs.
Interlocking PVC panels
Interlocking PVC tiles are equipped with a fastening system, thanks to which the material can be laid without the use of glue. The resulting floating coating is prefabricated. It can be installed and disassembled 3-4 times. Work on installing PVC panels with a tongue-and-groove lock should begin from the far corner of the room, going from left to right.
When laying the first row, it is recommended to step back from the wall by at least 5 mm. This is done to compensate for thermal expansion. To speed up the process of snapping locks, you can use a special rubber hammer, eliminating the risk of damaging the surface of the flooring. If the last row of tiles does not fit into the remaining gap, then the material must be cut. To do this, lay the panel on the installed products with the groove facing the wall, and mark it with a pencil. Cut off the excess. Install the decking.
Self-adhesive tiles
Installation of self-adhesive strips will require a minimum set of tools. To work you will need a rubber roller, a construction knife, a tape measure and a pencil. Installation of tiles must be carried out from one of the corners formed at the intersection of the lines that connect the middles of opposite walls. To install the element, remove the protective shell covering the adhesive side. Place the tiles according to the markings, “walk” over them with a roller to remove air bubbles.
Self-adhesive tiles must be installed end-to-end. Near the walls, excess material should be trimmed with a knife, leaving a gap of several millimeters.
Roll coverings
Installation of roll material is a simple process that does not take much time.
To lay the products, follow the following procedure:
- Prepare the base, get rid of cracks, holes and bumps on the surface.
- Measure the length and width of the room.
- Cut the flexible material in accordance with the calculations made. Lay it out on the floor for adaptation. The product should rest for approximately 24 hours.
- After 24 hours, apply adhesive to the prepared surface, apply the flooring material to the floor, and roll it in with a rubber roller. Remove excess glue with a sponge. Place the next roll end-to-end with the previous one.
You can walk on the laid flooring only after it has completely dried. This will take at least a day. Upon completion of the work, the edges of the material must be pressed around the perimeter with a plinth.
To learn how to lay PVC tiles, see the following video.
Manufacturers and reviews
PVC tiles are a modern finishing floor material produced by many domestic and foreign companies. The most famous manufacturers are listed below.
- Tarkett. A Swedish company that produces high-quality materials with a pleasant texture. All products from this manufacturer have several layers, due to which they are characterized by increased resistance to abrasion and mechanical stress. Tarkett is the leader in sales of floor finishing materials in the domestic market. Judging by consumer reviews, Tarkett products retain their impeccable appearance for 5-10 years. It has the best value for money.
- Decoria. Manufacturer from South Korea. Korean tiles contain silver ions. Due to this feature, the coatings have environmental friendliness and antibacterial properties. Overall, consumers respond positively to Decoria products. They note the affordable price of the material, easy installation and durability of the flooring.
- Armstrong. PVC tile production company located in Germany. Collections of products are distinguished by high strength, reliability and durability. Most Armstrong tile buyers are satisfied with their choice. They note the high aesthetics of the material. According to the consumer, the products are pleasant to the touch, easy to care for, and resistant to temperature changes.
- Heat-Pro. Manufacturer of PVC tiles from Denmark. The main feature of the material is the presence of a special protective layer, thanks to which the coating can withstand intense loads. According to users, such products retain their original appearance for a long time, even in rooms with maximum traffic. This is an excellent solution for commercial premises.
Unfortunately, counterfeit products are often found on the Russian market. It does not meet the stated quality standards. Therefore, when choosing floor coverings, pay attention to the product labeling. It is also better to refuse products offered by unknown or unfamiliar manufacturers.
To verify the quality of the products, ask the seller for product documents.
Examples of use in the interior
Manufacturers produce PVC tiles in a wide range. Thanks to the variety of designs, in one room you can combine materials with different tones and textures, creating original interior variations. If you like non-standard solutions, you can use PVC tiles as a bright and unusual design object.
Also, with the help of vinyl tiles, you can visually divide the space, for example, separate a seating area from a place for preparing food in a spacious kitchen. To do this, you can use combinations of tiles that imitate wood and stone-like materials.
Flooring made from high quality vinyl. This is a “two in one” floor: it simultaneously combines the advantages of linoleum and laminate. From the first he took elasticity, water resistance, high sound and thermal insulation: both are made from thermoplastic synthetic materials, but for PVC tiles more durable polymers are used (modern models include quartz particles). It is combined with the second by impact resistance (a design feature) and a realistic imitation of natural textures - wood, stone. That’s why PVC tiles are called “quartz vinyl laminate.” Initially, it was mounted only with glue. Nowadays, manufacturers also produce models with locking mounts.
PVC floor tiles have another advantage - modularity. Due to the specific format, it is suitable for rooms of any geometric dimensions, including non-standard cases. In case of local damage, small strips can be easily replaced with new ones without deforming the rest of the coating. Caring for quartz vinyl laminate does not require labor-intensive efforts: regular dry (using a vacuum cleaner) and wet cleaning (using a medium-intensity detergent) is sufficient. However, it is not recommended to use chemical solvents or abrasive powders to clean it - they can damage the coating.
PVC floor tiles - catalog
We offer to buy high-quality quartz vinyl laminate in our store:
- Wineo is a German brand of luxury flooring. Vinyl models have an exclusive design developed by the company's engineers. It includes: soundproofing substrate, load-bearing HDF board with waterproof treatment, fiberglass reinforcing mesh, decorative pattern, wear-resistant coating, transparent protective layer (0.3-0.55 mm thick). High resistance to abrasion (protective impregnations), stains (greasy stains are not absorbed into the internal structure and are easily removed from the surface with detergents). Fire hazard class - KM 2 (increased fire resistance). Decors of quartz vinyl laminate realistically imitate a variety of natural textures: wood of various treatments (for parquet), stone - travertine, slate, spectacular chips (for tiles). The floors are designed for use in any premises: commercial and residential, including areas of high humidity (bathrooms, showers, etc.). Our assortment includes models with locking and adhesive installation methods.
- Quick Step - vinyl coverings from the famous brand. Production - Belgium. Very realistic decors that imitate natural textures: parquet (species - oak, pine, chestnut), tiles (marble, slate, concrete, mineral chips). The surface is treated with a sealed compound that does not allow water or dirt to pass through. Stain Guard impregnation based on polyurethane varnish (a patented development of the company) protects the floor from abrasion even under intense external influences: high indoor traffic, scratching objects - roller wheels, heels, furniture legs.
- Pergo is a PVC floor tile from a famous brand owned by the international concern Unulin. Made in Belgium. The design imitates natural materials: wood (oak of various shades), stone (travertine - calcareous tuff with an expressive layered structure). The surface has effective protection against scratches and dirt - TitanV - a sealed wear-resistant coating. Highly environmentally friendly: professional certificates confirm that the materials do not contain phthalates.
PVC floor tiles - available for purchase at an affordable price - are offered by the Pol Country store - we officially represent European manufacturers.
Laying PVC tiles on the floor, what you need to know
Choosing flooring is a difficult task. It must be reliable, wear-resistant, beautiful, non-slip, durable. It is also desirable that it is easy to fit. PVC floor tiles satisfy all these conditions.
What are PVC (Vinyl) Floor Tiles
Not long ago, another type of PVC coating appeared on the market - vinyl tiles. It is somewhat similar to good linoleum (hence another name - linoleum), but the production technology is different, as is the release form. This material is cut into rectangles or squares, can be with or without an adhesive base. It has more than one name - LVT tiles (LVT) - an abbreviation of the English name Luxury Vinyl Tile. Design or art tiles - this is also understandable - designer floor coverings are created from squares or rectangles.
The release form turned out to be so convenient that it quickly conquered the market. It is easier to install and more economical. Not in the sense of price - it is just high (at the level of commercial-grade linoleum), but in the sense that there is a minimum of scraps left - much less than when using linoleum. This, and its excellent performance characteristics, is the secret of its growing popularity.
PVC floor tiles consist of vinyl and resin, to which stabilizers, plasticizers, and sometimes fillers are added (to give specific properties or a special appearance). The heated mixture is pressed. The resulting material is highly dense, but remains flexible and ductile.
PVC tiles consist of several layers:
![](https://i2.wp.com/stroychik.ru/wp-content/uploads/2017/01/PVH-plitka-2.jpg)
In terms of composition, there are two types of linoleum tiles: vinyl and quartz vinyl (quartz vinyl). The second option is more expensive, but also denser, with increased wear resistance.
Types and varieties
According to the installation method, there are PVC floor tiles with a self-adhesive base, and there is a regular one (installation of the second type will require glue). Finishing material for this type of floor is glued end-to-end onto a flat, clean base. With this installation method, the floor covering forms a monolith with the base.
There are tiles with locks - mechanical and adhesive. The elements are connected to each other using these locks, and the coating itself turns out to be unrelated to the base. This option is called a “floating” floor.
Like linoleum, PVC floor tiles are classified according to the degree of load:
![](https://i0.wp.com/stroychik.ru/wp-content/uploads/2017/01/PVH-plitka-4.jpg)
In any of the classes, the choice of color and texture is very wide. There are imitation of natural materials - wood, various types of stone, etc., there are plain ones, with and without decorative additives. The most common shape is rectangular, with different side lengths, there are squares. Rectangles are most often made to look like wood, imitating parquet or wooden floors, but squares are more often found in a single color. Interesting panels are collected from them.
When choosing, along with the class, you need to look at the thickness of the protective coating. The thicker it is, the more durable the coating will be. The optimal choice for a house and apartment is a tile thickness of 3 mm, the thickness of the protective layer is 0.3 mm.
Pros and cons
We collected the main properties of vinyl floor tiles from reviews of the owners (and housewives) of such flooring. It turned out to have many advantages:
![](https://i2.wp.com/stroychik.ru/wp-content/uploads/2017/01/PVH-plitka-5.jpg)
In general, almost everyone unanimously declares that PVC floor tiles are the best they have had so far. Moreover, “before” there was laminate, linoleum, ceramic tiles, some even had parquet. Disadvantages were also collected from reviews. There weren't many of them:
![](https://i0.wp.com/stroychik.ru/wp-content/uploads/2017/01/PVH-plitka-3.jpg)
As you can see, this is a really good option. Suitable for any premises - technical, residential, with difficult operating conditions.
Laying
Actually, laying vinyl tiles itself is not a very complicated process, but it requires precision. Pay special attention to laying the first two rows, on which all the rest then rest. There is also a difference in the technique of gluing vinyl tiles with glue, laying self-adhesive or with locks. But there are also general requirements. Let's consider all the questions in more detail.
What tools are needed
To work, you will need a decent set of tools, but they are all inexpensive, many are on the farm. So, you will need:
![](https://i2.wp.com/stroychik.ru/wp-content/uploads/2017/01/PVH-plitka-16.jpg)
It would also be nice to have a hair dryer. In difficult places - when going around pipes - it is more convenient to cut tiles when they are heated. Then it’s no more difficult than cutting household linoleum. And you can only heat it up with a hair dryer. You cut the heated tile, wrap it around the pipe, and cut off the excess.
How to cut PVC tiles
Although linoleum tiles are dense, they are easy to cut in a straight line. If you need a cut that won't meet the edge of the tile, it's easier to work with. Draw the blade forcefully along the front side, bend it at the cut site, and cut the remaining part with a knife along the fold line.
If the cut needs to be even, to join with the next tile, you will need a ruler on the tape so that it does not move. In this case, you will have to cut through everything from the front side. This cannot be done in one go, but since the ruler will not move, you can use the blade two or three times.
Preparing the base
You can lay vinyl tiles on the floor yourself. It is only important that the base is properly prepared. It should be smooth, clean, dry and hard. PVC floor tiles can be laid on concrete, any type of screed, plywood, fiberboard, OBP, gypsum fiber board and other similar materials.
There is one caveat with a concrete floor and screed. The DSP screed turns out to be too loose and not rigid enough. It is better to level it under vinyl tiles with a self-leveling gypsum-based mixture. It is not difficult and not very expensive, but the result will be excellent.
The permissible deviation when laying PVC tiles is 2 mm per meter
When laying vinyl tiles on a wooden floor, it is leveled with plywood 12-15 mm thick. You can use GVL or OSB. All fasteners must be recessed and the holes filled with putty. The joints between the sheets are also puttied (do not forget to lay the slabs at intervals and leave seams of 2-3 mm - to compensate for thermal expansion). To putty joints, it is better to use acrylic putty - it is more elastic and smooth, and the adhesive tiles adhere better to it. In general, it is better to lay floating tiles on wooden floors rather than adhesive tiles - with locks of any type (mechanical or adhesive). There is less chance that the coating will swell somewhere due to the difference in the amount of thermal expansion.
The last stage of preparing the base is impregnation with suitable soil. The base will become even stronger, the absorbency will decrease and level out, and the glue consumption will be reduced.
It is also very important that the base is dry. Its humidity should not exceed 5%. It is measured using a special device, but it is not available in households. So we have to make do with improvised means. Take a piece of polyethylene without holes and masking tape. We tightly glue the polyethylene with tape to the base (along the edge in several layers) and leave it for a day. After a day, peel it off and feel it from the inside. If there is no condensation, everything is fine - the floor is dry enough to start laying PVC tiles.
Laying methods and markings
If you are laying PVC tiles yourself and you are using “planks” that imitate wood, you have no experience working with such material, it is better to start with the simplest scheme - with an offset. For this installation method, it is better if the offset is arbitrary - the joints are not visible. When using this scheme, it is only important that the joints of the “planks” be spaced at least 15 cm apart. This method of laying is also economical - a cut piece from the last element in a row can serve as a starting plate in the next one (or after one, if the joint is closer than after 15 cm). Other common offset options are 1/3 and 1/2 the length of the board. In this case, the pattern is more regular and the joints stand out more.
With this layout method, the planks are usually placed along the long wall of the room. When using lockless PVC tiles, the layout begins from the middle. To determine the location of the starting line, find the middle of the room. Then a line is drawn through it, parallel to the walls. This is done using a paint cord or a ruler and a pencil. This line is used as a guide when laying the first two rows of vinyl tiles, aligning the edges of the tiles with it. With other layout methods, everything is more complicated - you have to calculate, draw, and this is not so easy.
Vinyl tile adhesive
Special glue is used for gluing PVC coatings. There are two types of compositions: glue and fixation. Everyone knows what glue is, but few know about fixings yet. This composition is different in that it does not dry to a solid state. When it dries, a sticky substance remains on the surface, similar to that found on tape. This method is good because the glued coating can be peeled off several times. In this way it is also similar to the sticky composition of scotch tape. PVC tiles can be easily peeled off when fixed, even after a considerable period of time (several years or decades). In this case, it will not be possible to move the covering, which is fixed in place: lateral displacements are excluded. It comes off only if you pull the edge of the tile up.
It doesn't matter what type of adhesive you choose. It is important that it is suitable for gluing PVC coatings and is not expired.
Laying PVC tiles with glue
The glue is applied in an even layer on a dry and clean base along the strip drawn on the floor. The width of the glue strip is enough to lay two tiles, if they are long and narrow, the length is to the end of the room. When applying the glue, spread it with a fine-tooth spatula. There should be no bald spots or puddles. We need to achieve uniform distribution. If according to the instructions for the glue, you need to give it time to dry - we wait. If not, you can put it in right away.
We place the first row, aligning one edge strictly along the drawn line. When applying glue, try not to smear it, otherwise you may lay it crooked. We laid the first tile and ironed it with our hands, expelling the air from under the material. We step on the laid tile with our feet, lay the next one, fitting the joint tightly. We glue a piece of masking tape about 10 cm long to the newly laid board. We glue about half of it onto the laid tile, pull it tightly to the laid one and fix the tape. This way the tiles have no chance to move. Having fixed it, we iron it, expelling the air. Repeat with the next one. When laying the second row, we also fix it on the sides using 3 strips of tape.
Having laid two rows, we take a pressure block and use it to rub the laid coating well. This is how we completely expel the air. According to the technology, it is necessary to use a pressure roller weighing 50 kg, which is used to roll the freshly laid coating. It is not available at home, so you have to make do with a replacement. There is another way to glue linoleum tiles well: after laying, tap them well with a rubber mallet.
Why do you need fixation with tape, since it is rarely used? So that the already laid tiles do not move, and this is possible, since the adhesive takes 72 hours to completely dry.
Self-adhesive
Self-adhesive PVC floor tiles are also installed. The difference is that you don't need to apply glue. Before installing the tiles, remove the protective layer, lay the tiles in place, and smooth them. The rest of the procedure is the same.
In this case, the planks do not need to be fixed with tape, since the substance on the reverse side is sticky enough to keep the coating from shifting immediately after gluing. An important nuance is that you must first press the tiles against the side surface, holding the bar suspended. When the edge is joined, the covering is gradually lowered, trying to leave as little air as possible.
Laying PVC tiles with lock
The lock on vinyl tiles can be mechanical or adhesive. The only difference is in the principle of fixation. The rest of the rules are the same.
The main difference is that the installation of interlocking vinyl tiles starts from the wall. The slats are positioned so that the locks “look” into the room. The first row is laid a few millimeters away from the wall to compensate for thermal expansion. This gap can be ensured by installing pieces of material of suitable thickness or by finding thick crosses for the tiles.
When laying PVC tiles with an adhesive lock, you must first join the end, aligning the edges of the planks. Then they join the lock along the long side and, only after that, lower the slats completely. The edges are ironed, checking the tightness of the mechanical lock.
The following video demonstrates how PVC tiles are laid on a floor with a mechanical lock. Usually the material comes with instructions with pictures, but watching the video is also useful.
The process of installing self-adhesive vinyl tiles is shown in this video. The connection is no less reliable, and assembly of the coating is even simpler.