One of the most original and unusual wall decor options in the bathroom is liquid wallpaper. This is a convenient material that has become an affordable alternative to traditional tile.
On the advantages and disadvantages
Among the main advantages of liquid wallpaper can be noted:
- practicality. You do not need to additionally level the surface in the room to apply this type of wallpaper on it. They themselves hide all the bumps, small defects. There are no seams in these wallpapers. Therefore, even after repair, the surface will retain its original characteristics;
- environmental friendliness. This type consists of absolutely safe components. The surface does not pass moisture, does not attract dust. You can not worry about breeding fungi with mold. Pleasantly surprised by the heat and sound insulation characteristics;
- versatility. Liquid moisture-resistant wallpaper is suitable for any room, regardless of their purpose. And easy to apply to any surface;
- long service life. Just regular glue is enough to securely connect.
The photo shows the interior of the bathroom with liquid wallpaper:
Attention! This lining is easy to repair in case of damage. It is enough to wet the area, and remove it with a spatula. A layer with new wallpaper is then applied to this place.
But there are also a number of disadvantages:
- high price. To purchase the right amount, you will have to spend 2-3 times more than on analogues from other materials;
- easy rinsing with water. Liquid moisture resistant wallpaper is not for those who like to wash everything, even walls. They are quickly washed off if you rub it long and hard with a wet cloth. Walls can be coated with a special transparent varnish, but then they lose their ability to let moisture in. If any area has become too polluted, it is easiest to replace it with a new one;
- The process of applying someone will seem too time-consuming.
Varieties for the bathroom
Liquid wallpaper has not only a different color scheme, but also a different texture. In total, three main varieties are now distinguished.
- silk. Consists of fibers of the corresponding material. Has a high price. But it is a leader in terms of attractive appearance for the bathroom. It has a UV resistant surface. Due to which the colors remain bright for a long time;
- produce the so-called cellulose finish. Much cheaper than the previous version. Suitable for those who have limited financial opportunities at the moment;
- combined variety. The composition contains both cellulose and silk fibers. The cost is usually determined by the amount of cotton or silk in the composition. The more it is, the more expensive the wallpaper will be.
Liquid wallpaper is sold in certain types of packaging. They are divided into several types depending on how ready they are for use.
- There are base mixes in dry form. To them, you need to add textural components along with dyes. Reviews are both positive and negative;
- material is released in packages. Inside, it has the appearance of flakes, and it is they that are combined with texture materials, mineral dyes and water;
- finally, liquid wallpaper for the bathroom is sold in plastic containers. They add paints of different colors.
How to apply correctly
Liquid wallpaper in the bathroom is applied in the same way as in other rooms. In any case, work begins with the preparation of the walls. The old coating is completely removed, the walls are leveled. Then putty is applied, the surface is primed.
The presence of ceramic tiles on the wall complicates this process somewhat.
Liquid wallpaper is applied to the walls in the bathroom in the following order:
- First prepare the wallpaper mixture. It's easy, just follow the instructions on the package. She should stand for some time. Knead it only by hand;
- a small amount of water is added to the material when a certain time has passed. A plastic trowel is the most convenient tool for applying wallpaper;
- the process goes from one corner to another. With light movements, they are gradually smoothed out;
- the last stage is the application of a protective coating of colorless varnish with an acrylic base. The main thing is to make sure that the surface is dry before starting work. A special roller or wide brushes are best for applying varnish. It is thanks to acrylic varnish that the surface of the walls becomes matte. And it receives additional protection from external influences of moisture and steam.
What liquid wallpaper looks like in the bathroom can be seen in the photo:
Additional rules
To glue liquid wallpaper in the bathroom, you do not need to have special building skills. But experts give the following advice to those who want to create a truly unique interior in the bathroom.
Attention! A wall in an unfinished form is an unacceptable phenomenon. After some time, this work will be more difficult to continue. Old and new wallpaper layers will not dock with each other.
Textured finishes and methods of applying to the wall determine what the appearance of the wallpaper will be. Liquid wallpaper in the bathroom can be seen in the photo:
There are several ways to get the original liquid wallpaper in the bathroom:
- application of a structural roller. It will help to cope with the problem of leveling wall and ceiling surfaces;
- embossed rollers. They will allow you to create colored panels and stucco decorations, if the liquid wallpaper has a thick enough consistency.
Cellulosic mixtures are always laid flat on the wall. This is a great solution for getting rid of minor defects. Thanks to this, finishing, repair work in the bathroom takes less time.
The combination of liquid wallpaper with tiles
Many choose the option when tiles lie on part of the walls, and liquid wallpaper itself on the other. This is perfectly acceptable.
For laying tiles, the walls must be leveled, with drywall or plaster. Such processing takes up part of the free area, but the result will pleasantly surprise you with quality.
On the surface of the wallpaper itself, you can create any drawings, the choice is limited only by imagination. Then inaccuracies are easy to correct. Excellent quality in case you suddenly want to choose something else later. In a normal situation, liquid wallpaper in the bathroom is applied with a layer of about 5-7 mm. Thicker layers are needed for those who use embossed decorations.
Other decorative options
The variety of decor options available is one of the main advantages that liquid wallpapers have. When using conventional materials, we simply glue what we have chosen in the catalog. A liquid material gives almost endless possibilities. You just need to decide which colors to use in the decoration.
- The use of one color for interior design is the simplest and most affordable solution. If the shade gets tired, it is easy to dilute it with bright colors. Mosaic, stickers, new mix - there are really many options;
- you can purchase a composition of one color, and then carry out coloring. An excellent solution for creating a bright, unusual interior in the bathroom;
- Various techniques are used to apply liquid wallpaper. Thanks to this, you can create paintings or patterns, geometric shapes. The main thing is to take care of the designation of the contours of these figures in advance. And then fill them in the appropriate way. The material can be easily washed off with water where the contours are fuzzy. This allows you to correct inaccuracies;
- decor and stucco effect is created with the help of structural, embossed rollers. Why apply two layers, one after the other. First comes thin, and the next thicker.
How you can make a thematic drawing in the bathroom of liquid wallpaper is shown in the photo:
What else do you need to know
If the surface is covered with liquid wallpaper, it is easy to repair, clean if necessary. A regular eraser will be enough to remove the stains under the switch. Any dirty spots are removed with a spatula. To do this, you just need to pre-moisten them with water. Then glue a layer with new wallpaper. It is better to apply more material, then it will definitely be flush with the old one. Reviews confirm this rule.
Wallpaper can not be removed when a new renovation is carried out. The paint is easy to apply directly to the wall. In this case, the texture does not suffer at all.
It should be understood that the texture of the wallpaper that is applied to the wall in reality will differ from what is presented in stores. Samples have an ideal appearance due to the fact that a small amount of water is added to them. In practice, more fluid is lost.
Correctly dilute liquid wallpaper for the bathroom will help video instruction:
How to calculate consumption
On the packaging, they usually write everything you need to know about consumption. Therefore, it remains only to calculate the total area of \u200b\u200bthe walls in the bathroom, and then divide by the amount of the mixture needed to finish one square meter.
Do not subtract windows and doors from the total area, if any. It is best to purchase material with a margin. The surplus can then be used for minor cosmetic repairs. This is confirmed by reviews.
The main thing is to ensure that the wallpaper layer is even. In any situation, the finishing method that seems most appropriate is chosen:
There are other tips to achieve the perfect result when applying liquid wallpaper.
- applying wallpaper from lighter corners to darker ones;
- the procedure is recommended to be repeated after the mixture dries for the first time. The wall is moistened with water in small quantities;
- requires a room temperature of up to 15 degrees or lower, as the reviews say.
Do not immediately throw out the remnants of liquid wallpaper. They will help to correct the flaws that appear after the first drying. Or replace a small area with damage. Wallpaper can be stored for up to two weeks when wet, in a tightly tied plastic bag. It is better to dry if you plan to store the mixture for a longer time. The next time you use it, you just need to add water.
The composition dries for 12-72 hours, depending on the density that the fibers have. The material is elastic, making it easy to lay even on surfaces with defects. No need to worry about the wall being as flat as possible. Even when the walls shrink, liquid wallpaper will never tear. Some compositions have silver, golden threads. They will make even the simplest rooms look elegant. The fabric covering effect is created by the incoming silk fibers. The surface will look stylish and elegant if you make the material layer very thin.
The following video will help to glue liquid wallpaper correctly:
The use of liquid wallpaper in the bathroom is a way to make repairs relatively inexpensive and at the same time remain as original as possible. The second is no less important than the first - most fellow citizens still live in buildings of those times when the emphasis was far from being on individualism. Accordingly, the owners have to figure out how to make housing non-standard, and even for little money. Today, in the era of the spread of non-paper types of wallpaper, even this finishing material can be used to decorate the walls in the bathroom. The main thing is to figure out how to make it all durable.
Is it possible to use liquid wallpaper for the bathroom?
Of course, you can use liquid wallpaper in the bathroom. This finishing option has a number of advantages that allow it to be successfully used in conditions of constant high humidity and temperature. An exception to the rule, perhaps, should be made only in the plumbing area in order to protect the wallpaper from direct water on them. At the same time, even laying out these areas with tiles, you can significantly save on finishing. However, the most expensive varieties of decorative material allow you not to look at all in the direction of ceramic tiles.
Pros of liquid wallpaper
Studying the advantages of liquid wallpaper, you can see that in a sense they are superior even to washable canvases, which in this case are perceived by many as an ideal. Let's take a closer look at all the benefits:
- Long service life. Liquid wallpaper in the bathroom is unlikely to withstand a couple of decades of use, like ceramic tiles, but they are much more durable than any other wallpaper. For several years, such a finish is definitely enough, especially since the damaged areas can be easily repaired - the specificity of the material is such that there are no noticeable seams in the place of the “patches”.
- Environmental friendliness. The material usually does not contain any additives that could harm human health or the environment, on the contrary, it is a product of natural origin.
- Elasticity. Both during application and after drying, the material remains plastic, that is, it is less susceptible to mechanical damage. Is it worth bothering with large rolls that are easy to tear when the finish can be applied like plaster?
- All-round impermeability. Liquid wallpaper does not transmit sound, heat or moisture, that is, it creates ideal conditions for sanitary and hygienic procedures. Moreover, unlike competitors, they do not absorb odors.
- Easy to mount and dismantle. You don’t have to worry that the pattern will not match - it does not exist, and even the seams when applying the material with a large difference in time will not be noticeable. If the old design is tired and you want something new, you can remove the previous finish and apply a new one. The procedure does not require any preliminary preparation - even a schoolboy will cope with the task. Complete dismantling to add new parts is optional - it is enough to apply fresh elements over the old coating.
Thus, all of the above makes liquid wallpaper an excellent solution for the bathroom.
Possible disadvantages
Perfect building materials do not yet exist, so liquid wallpaper can also have its drawbacks. Here it should be clarified that for expensive products, the main disadvantage is precisely the cost, which scares away many buyers. If the consumer wants to save money and purchase a cheaper option, then it is not a fact that the material is suitable for use in the bathroom. The fact is that initially, manufacturers did not recommend this type of finish for wet conditions at all, and only in recent years have new types been developed that are distinguished by decent moisture resistance. If the desire to save money wins, then at least cover the wallpaper with varnish, otherwise the appearance of fungus and flaking cannot be avoided.
What is included in liquid wallpaper
In appearance, liquid wallpaper on store shelves is more like a dry dye or powdered plaster. The last comparison could be called fair, and the powder got its unusual name due to the presence of cellulose fibers. In addition to them, dyes, dry glue and cotton are also often found in the composition to improve strength. As you can see, nothing that could adversely affect your health.
Expensive options can be distinguished by smell. Manufacturers add unusual ingredients to such products, such as wood chips or dried seaweed. This will not affect the quality of the coating, but it will smell expressively and brightly, so that the guests, and the owners themselves, will be delighted!
How to properly glue
To apply liquid wallpaper on the wall, it is not necessary to call the masters - you can do it yourself. The only thing is that for a good result it is important to follow all the rules developed over the years of using this material.
The dry mixture must be soaked in water at room temperature 12 hours before application and mixed thoroughly. It is more convenient to do this with your hands - the material is environmentally friendly, so there is no danger. If the package contains glitter in a separate bag, it is poured into the bowl first. The finished mixture should be plastic, easy to spread, but also viscous enough to stick to the wall.
Before applying the wallpaper, the wall is primed for better fixation of the finish, preferably in two layers, with a break for each to dry. You can apply the mixture to the walls by any method - with a roller, sprayer, gun or trowel. The latter is usually the most practical - a little mixture is applied to it, and then, holding the tool at an angle of 10-15 degrees with respect to the surface, the mixture is laid out on the wall. The recommended layer thickness is 1-2 mm. The material will hide small irregularities of the wall surface, however, the finish itself may not lie perfectly the first time - in order to even out the protruding parts, after the application is completed, it is worth walking over it again, gently wetting it with water.
As for the time spent on work, it usually takes several hours to apply directly if one person works and we are talking about a bathroom. As for the final readiness of the repair, it is necessary to wait until the mixture is completely dry, and this already depends on the temperature and humidity of the room. It is noted that for reliable adhesion, too hot a temperature is undesirable, while drafts, an eternal problem for any other wallpaper, will not become a problem - the room can be ventilated even during operation.
It is especially worth highlighting the moment that the mixture does not have an unpleasant odor, that is, all household members can be at home, the main thing is just not to touch the walls until they dry.
We are accustomed to the fact that the office premises: bathroom, toilet and kitchen were traditionally lined with ceramic tiles. Today, in the construction market, there are new compositions that can successfully compete with old materials.
It can be liquid wallpaper for the bathroom and other office space. When choosing decorative moisture-resistant coatings, special attention should be paid to the service life.
The article describes their composition, raises the question of the appropriateness of using in the bathroom. And also, attention is focused on the preparation of work surfaces and the technology of applying the finished mixture. Information is given on how to choose liquid wallpaper for a toilet, the pros and cons of the working material are revealed. At the end, traditionally, the results are summed up..
Waterproof liquid wallpaper is offered by manufacturers in the form of dry mixes. Water is required to bring them to working condition.
It is desirable that the water temperature during mixing be at the level of 30-35 0 C. All the necessary information is indicated by the manufacturer on the outside of the package.
To prepare liquid wallpaper, it is necessary to pour the dry mixture into a container and gradually pour warm water in the amount indicated in the instructions. It is necessary to mix the mixture manually, without using any tools.
Liquid wallpaper do:
- Based on fine-grained oak bark.
- Made from shredded cotton.
- With the addition of gelatin.
- With the use of such a gradient as mica.
- Based on silk.
- And even dry algae.
Liquid wallpaper can be used in a children's room, hallway or bathroom.
Three types of this material are known today:
- with the addition of silk;
- using cotton;
- and cellulose.
The component for completing the work (finishing composition) stands apart.
in silk product high percentage of natural silk. This material can be safely applied to a concrete wall surface or drywall. It does not require preliminary preparation and surface plastering.
Silk material the good thing is that during restoration, you can work with a problem area without processing the entire wall. The silk composition can be sold in the distribution network in the form of a powder or in a liquid state.
Cotton Blend- This is 98% pure cotton with 2% mica. As decorative additives, both cellulose and the adhesive component can be used.
In a cellulose based product added recycled wood. The finished mixture perfectly aggregates with the wall covering, closing small cracks. Specialists in the construction industry pay attention to the possibility of processing walls in unheated rooms.
As we said earlier, the finishing material stands apart and is not included in the described three products. It is offered by commercial organizations in the form of a ready-made mixture or powder. During preparation, dyes and decor components are added to the powder composition.
Is it possible to glue in the bathroom
Liquid wallpaper can be glued to the bathroom, as they do not form a greenhouse effect. Until recently, this type of finish did not attract attention. Today they are, in fact, a universal way of finishing residential and office premises. Previously, the bathroom was massively tiled.
Is it possible to finish the bathroom with liquid wallpaper: it is possible and necessary, experts say. They can be used alone and in combination with the same finishing tiles and mosaics.
The main thing is that they do not absorb moisture. If it is decided to use this finishing mixture, it is important to choose the right material, as well as follow the manufacturer's recommendations, which are indicated on the outside of the package. Read about the pros and cons of moisture resistant material below..
Advantages and disadvantages
If you want to decorate the space of technical rooms in a non-traditional way, try the described product. It looks original and relevant. The quality of the wallpaper is always at a high level.
The designer can create a unique masterpiece by revealing the decorative possibilities of the product. Check out the pros and cons of liquid wallpaper for the bathroom.
One of the main advantages can safely be considered a long service life of the product. Unlike conventional, liquid wallpaper can be easily repaired, including only the problem area. The mixture in question is absolutely safe for the health of adults and children.
Besides:
- They contain natural ingredients that successfully resist fungal growths and mold.
- They have antistatic properties.
- They do not accumulate dust particles on themselves, they are hypoallergenic.
- They can be applied to any surface.
- They are good soundproofing material.
- Keep warm, do not fade.
- They do not absorb moisture.
- Liquid wallpaper is a seamless material.
The finishing product has a number of disadvantages, which are not so many:
- it takes a long time to completely dry the applied layer;
- preparation is a very lengthy process;
- high price.
Having become acquainted with the strengths and weaknesses of the material, let's find out what applies to the preparatory work.
Preparatory work
It is necessary to prepare the work surface, which means cleaning it of dust, dirt, after removing the old paint or plaster.
Further preparation of walls for liquid wallpaper involves plastering and priming in two stages.
note!
The work surface should be as flat as possible. If you leave differences, they will be visible after applying liquid wallpaper in the bathroom and other service areas.
In a mandatory manner, an antifungal composition should be applied and the mixture should be allowed to dry.
Liquid wallpaper for the bathroom can be prepared by hand. To prepare the wallpaper mixture, you need to mix the dry product with water. The most comfortable water for preparing the mixture should be approximately 30 0 C. It is important to mix the composition thoroughly. Leave for 12 hours in a closed container for sludge. As a result of the above manipulations, the output should be a homogeneous mass resembling low-fat sour cream.
Then, using a trowel or spatula, the working composition is distributed along the wall in a circular motion. You need to move from the center to the corners, and not vice versa. Next, you need to pause for 1.5-2 hours for the mixture to dry, and repeat the leveling with the same spatula or trowel, while observing the technology that will be discussed below.
Application technology
The method of applying liquid wallpaper involves a number of steps:
- Preliminary cleaning of the working surface, followed by a primer with a special composition.
- Application of a colorless, water-repellent, protective layer of acrylic-based varnish. Such a procedure will make it possible to exclude the ingress of water.
- Preparation of working material, based on a dry mixture, with the addition of water to the consistency of low-fat sour cream.
- Liquid wallpaper in the bathroom is applied to the wall.
Finishing the bathroom with liquid wallpaper can be done in several ways:
- A sprayer with a grater made of light plastic. Working with a grater or plastic trowel, the mixture is first laid out on the tool, and then evenly applied to the wall. The method of applying liquid wallpaper involves holding the working tool at a certain angle: no more than 15 0 .
- The second way to apply liquid wallpaper is to use a relief or structural roller, which can and should be selected in accordance with the size of the room.
- Moisture-resistant liquid wallpaper in the bathroom with a plaster gun.
On a note!
It is necessary to apply the working mixture from a light corner to the opposite side.
After laying, it will take several hours for the applied mixture to dry. You can walk over the surface one more time for a better effect. In order for the tool to slide and eliminate defects, the wall must be periodically sprayed with water.
Spraying a liquid mixture with a gun will not cause problems even for a beginner. It is important to work at t 0 in a room of about 15 0 C, which will allow the mixture to better adhere to the wall. Working with a gun, we get an uneven surface. This option suits many. The room receives a peculiar pattern, not similar to the standard version.
The work will not take more than 2-3 hours. Today, you can use a combination of the material we are considering with tiles.
To finish the bathroom with liquid wallpaper, a combination with a facing material is allowed: tiles. The wallpaper mixture will protect the walls from water ingress, and the facing tiles will give the room freshness and individual design of the space.
Moisture-resistant liquid wallpaper in the bathroom will look bright, playing with all the colors of the palette. To place the tiles, the walls need to be leveled using:
- Drywall.
- Or plaster.
You need to understand that the processing will “eat up” part of the free space, but the result can please the owner of the apartment for a long time.
And one more thing: liquid wallpaper in the bathroom is applied in a layer with a thickness of 5 to 7 mm.
Examples for the bathroom photo
You can see examples of completed works of liquid wallpaper in the bathroom.
An example of the work of finishing with liquid wallpaper of the toilet.
We will send the material to you by e-mail
By and large, it is difficult to call this type of wall covering wallpaper. Liquid wallpaper is more like paper plaster. Moreover, they are applied in exactly the same way. Today we will talk about all the features of this material. We will thoroughly discuss liquid wallpaper, reviews, disadvantages and advantages. After all, this is a difficult material to work with, but with its help you can achieve very impressive results.
Liquid wallpaper - part of the original interior
There is a version that liquid wallpaper was first invented in France and their appearance was historically associated with Charles VII. Allegedly, it was in the castle he captured that the walls were first covered with a mixture of crushed silk and flour. The king was impressed by this original idea of the masters and this technology was used in other palaces.
In fact, it would be correct to call the material paper, not wallpaper, but it just so happened. So, liquid wallpaper - what is it? E it is a friable dry multicomponent mixture, which is packed in bags by weight, and for application it is diluted with water or an adhesive composition.
Liquid wallpaper contains the following components:
- Cotton or cellulose fibres. This component makes up 90 percent of the material. Recycled raw materials can be used for the mixture. The waste of textile and woodworking production, waste paper are used.
- Decorative elements. Their main task is to decorate and give a special relief to the coating. For this purpose, sequins, silk fiber, small beads, wood chips or threads and various dyes are used.
- Adhesive base. PVA, ordinary wallpaper glue or bustilat, paste can act as a binder. Natural formulations are welcome, non-toxic and inexpensive.
- Additional supplements. In order to prevent mold fungi and pathogenic bacteria from multiplying on the surface of the material, antiseptics are added to paper plaster. If you plan to use the coating in rooms with high humidity, it is advisable to cover it with varnish.
Note! On sale there are mixtures diluted with water and ready for application. They are sold in buckets. These wallpapers are a little more expensive.
How is liquid wallpaper applied to the ceiling? One of the main points is careful surface preparation. The ceiling is repeatedly covered with a primer, dedusted. If this is not done, pieces of the mixture will fall on your head already in the process of work.The composition is applied in small portions, carefully rubbing over the surface. Moreover, it should be applied with a throw, a sharp movement from the bottom up.
For this work, you will need a compressor with a capacity of 400 liters per minute. The size of the nozzle at the tube should be about 1 centimeter, so the cellulose particles will not get stuck during application.
We have selected instructions for you in the video on how to glue liquid wallpaper on the ceiling:
5 ways to remove liquid wallpaper from the wall
Liquid wallpaper should not be left on the walls if you plan to change the coating. No matter how strong they are, don't risk it. First, they are not suitable as a basis for other materials. Hidden behind a layer of plaster or a sheet of new wallpaper, cellulose becomes a breeding ground for mold and bacteria. And secondly, paper plaster does not form a perfectly flat surface, all irregularities will be revealed on the new coating.
Before you start cleaning the walls, turn off the electricity in the room and protect sockets and switches with tape. The fact is that you have to do “wet” work, and current and dampness are a dangerous neighborhood.To remove the coating, you will need warm water, a sponge, and convenient scrapers. For the best effect, you can add a couple of tablespoons of dishwashing detergent or fabric softener to the water.
Wet the walls liberally with a damp sponge and wait about 10-15 minutes. After using a spatula or scraper, remove the composition from the surface of the walls. This process is not fast. In some places, pieces of the dry mixture will remain, they will have to be soaked several times. Instead of a sponge, you can use a fur roller.
Note! Wallpaper removed from the walls can be reused after drying and grinding.
In addition to the usual soaking and using a steam generator, you can use an industrial hair dryer, or a drill with a brush attachment. But all these methods require significant physical effort. Think about whether you are ready for such a load.
How to remove liquid wallpaper from the wall, video recommendations:
How to decorate paper plaster
sequins
Modern wallpapers have a textured surface and different patterns. Glitter wallpaper looks especially attractive. Reflective particles make the interior bright and radiant, especially in natural light. Glitter for liquid wallpaper will help to focus attention in a certain area, for example, on the far wall or on the ceiling.
stencils
Stencils will help create unusual patterns on the walls. With their help, even a novice master can make a real picture. Multi-color compositions look especially original. To apply a mixture of different colors, you will need to make several templates. With the help of liquid wallpaper, volumetric compositions are also created. To do this, a mixture is applied to the main coating through a template in several layers, achieving the creation of a three-dimensional figure.
Article
The bathroom was traditionally decorated with ceramic tiles. Previously, tiles were produced in one color, then manufacturers brought ceramics to the market, decorated with various paintings and patterns. Thanks to the assortment strategy, the popularity of such finishes has increased.
Later, designers suggested wallpapering the bathroom. In this way, the room can be given a completely different look, original and non-standard.
Ordinary wallpapers are exposed to moisture, so using them in conditions of high humidity is impractical and not economical. Paper wallpapers can quickly fall off, and the glue will show through the paper.
The idea of using wallpaper in the bathroom could be considered unsuccessful if it were not for such a modern variation of them as liquid wallpaper.
Despite the fact that today many people prefer progressive solutions, there are many who still choose the usual methods for finishing the bathroom. In particular, washable wallpaper. It is believed that neither are sufficiently resistant to moisture, they can be cleaned of dirt, dust, fungus and other external contaminants. And also that such wallpapers do not exfoliate and do not swell, therefore they can be used to decorate rooms with high humidity.
However, experts with experience say that washable wallpapers are not much different from standard ones. The only difference is that the former will remain in their original state a little longer. That is, they will fall off the walls not in a few days, but in a few months.
Of course, wallpaper has a plus - you can glue it yourself, saving on tile laying specialists. But this plus is imaginary. Ultimately, due to the fragility of the material, savings will not be provided.
Washable wallpapers are most likely suitable only for those who prefer to change their design often.
Liquid wallpaper and its benefits
Liquid wallpaper for bathrooms is a novelty that quickly gained popularity. In general, wallpapers of this type are used for decoration of various rooms. With their help, the owners get the opportunity to create a unique interior in any room.
Another important advantage of liquid wallpaper is durability. They will serve for a long time and please the eye.
Environmental friendliness can also be attributed to the advantages of this new type of wall decoration. As you know, it is moisture that contributes to the appearance of bacteria and microbes, mold on the walls. Thanks to finishing the bathroom with liquid wallpaper, this problem can be solved. The composition of the wallpaper contains natural ingredients that have antiseptic properties. They also have good antistatic properties. Therefore, they are suitable for owners of apartments and houses suffering from allergies - dust is formed on such wallpaper in a minimal amount.
The elasticity of the liquid adhesive makes it easy to apply the wallpaper. The process does not require special skills.
Additional advantages of this material are soundproofing, the ability to retain heat, and not absorb odors. This can be seen after applying the wallpaper on the walls of the bathroom.
Despite the fact that the following aspect is not of particular importance for this room, it is still worth saying that liquid wallpaper does not fade.
If for some reason the section of the walls where the liquid wallpaper is applied is damaged, you should not worry. Replacing the damaged area is quite easy. It is enough just to remove the piece that breaks the harmony and apply the wallpaper again. At the same time, there is no need to select a pattern so that it matches along the edges - the seamless coating has no traces in those places where one line overlaps another.
Liquid wallpaper in the bathroom (photo) - seamless wall covering
So, the main advantages of liquid wallpaper:
- Durability;
- Environmental friendliness;
- Elasticity;
- No tendency to burn out;
- soundproofing;
- Heat retention;
- Immune to odors;
- moisture resistance;
- No seams at the joints;
- Easily replaceable.
The composition of liquid wallpaper
Externally, liquid wallpaper for bathrooms looks like textured decorative plaster or paint. The similarity lies in the principle of application, but the final result varies significantly.
Liquid wallpaper is sold in plastic bags and looks like dry powder. Therefore, you will not find them in traditional malls where standard wallpapers are sold. The composition of this powder is very diverse. It includes cotton or cellulose fibers, substances that help to fix the material on the walls, high quality dyes.
Liquid wallpaper got its name, among other things, due to the presence of cellulose fibers. Like washable bathroom wallpapers, they adhere to wall surfaces thanks to an adhesive backing.
Before buying, you should study the composition from which the products are made. Often, manufacturers add mica, dried algae, crumbs of tree bark as components. It should be noted that specific additives do not significantly affect the quality of the wallpaper, but it is better to give preference to those options that are produced in accordance with the standards.
How the cons of liquid wallpaper turned into pluses
Numerous advantages make it possible to classify liquid wallpaper as a product ideal for decorating bathroom walls. The thermal insulation capacity alone, as well as moisture resistance alone, speaks in favor of abandoning tiles and other traditional materials used to decorate bathrooms.
After application, liquid wallpaper looks like glass wallpaper, creating an unusual effect. The difference is that the latter are not environmentally friendly. Such a comparison also adds to the advantages of this modern finish.
In addition, the process of applying liquid wallpaper does not involve a number of preliminary work. For example, antifungal treatment of walls. This saves the owner time, effort and money.
Initially, the minus in the use of liquid wallpaper was seen in the fact that there was a need to cover them with a layer of varnish. Indeed, there was such a need. But it was relevant only for the first developments that appeared on the market. They consisted of cellulose fibers susceptible to moisture.
Based on consumer feedback, manufacturers quickly realized that this gap in development needed to be addressed. The deficiencies have been corrected.
Modern liquid wallpaper is resistant to moisture, in addition, it helps to successfully fight against fogging of mirrors in bathrooms, and is able to some extent protect wooden pieces of furniture from high humidity and temperature changes. Now it is the best option in order to provide an excellent microclimate in the bathroom.
