Good company for stretch ceilings. Which stretch ceiling company is better to choose: our rating. Stretch ceilings from the manufacturer cheap

On the websites of some companies for the installation and sale of stretch ceilings, sometimes there are a lot of names of manufacturers of materials for the future canvas with different pricing policies per 1 m2. This can cause very strong doubts, since in fact there are only a few of them in Europe. Indeed, many European brands that are offered to our buyers, when checked, turn out to be ordinary fakes, and simply do not exist in Europe - ordinary low-quality China is served under French sauce. How to understand and choose the best we consider in this article.

As we know, fabrics are fabric and PVC, respectively, and companies exist for the production of certain ceilings. By geography - European, in particular France, Germany, Belgium, Holland; and Chinese - factory and produced in artisanal conditions.

In terms of price-quality ratio, all suppliers can be divided into classes:

Fabric ceilings:

• the premium class is represented by the French brand Clipso and the Swiss Cerutti, the maximum width of the material is 5.1 m, the difference is only in the appearance of the weaving of the fibers, environmental friendliness and naturalness are at the highest level here and are confirmed by the ISO quality standard. It is important to know that 1m2 of these brands cannot cost 800 rubles / m2, because this fabric is only made to order and the cost with installation is 30-40 euros per m2 on a turnkey basis;
• the middle class of fabric ceilings in Moscow is represented by German Descor, the cut width is still the same 5.1 m, the turnkey cost is about 1000 - 1200 rubles / m2, taking into account the supporting frame, it is quite an adequate price for a hypoallergenic matte fabric ceiling in your home.

All other production, declared as an inexpensive analogue of fabric from China, does not belong to the fabric ceilings section and cannot be considered in this segment.

PVC ceilings premium class:

• CTN (France) with a stretch width of up to 2.2m, mostly matte texture, reminiscent of fabric weaving, these canvases have a minimal smell even when heated, are protected by markings. They are the best fit for involute photo printing, which looks like an expensive UV. The seams on this material are practically invisible, the turnkey price is about 1200 rubles / m2;
• this category also includes German ceilings from Renolit with an original width of 1.8 m, also marked and of the same value;
• decorative textures are produced by the Dutch factory Alkor Draka in a width of 1.3m in stretching up to 1.5m, here you will find similarities of suede, wood, metal and other original surfaces for 1500r/m2 including installation.

PVC ceilings middle class:

• The German concern Pongs has been producing excellent canvases of matte, glossy and satin textures in a width of 2 m and 2.7 m for several decades, such a width will ideally cover a room without a seam up to 3.2 m. But if CTN practically does not smell, then the smell is inherent in the German during installation and the next few days. The issue price is 900-1100 rubles / m2 on a turnkey basis, depending on the geometric shape of the premises.

PVC ceilings middle class (economy option):

• The Belgian brand PTMC produces wide-format material of any texture up to 5 m, and is in great demand among Muscovites, because with it a room up to 6 m without a seam is a reality!
• The Chinese MSD factory has modern equipment and technologies for the production of 5 m of canvases not only in white but also in other colors. Recently, they have certified their ceilings in Europe and are of interest to Europeans because of the possibility of large seamless panels.

Of course, these are not all manufacturers of fabrics for stretch ceilings, but we made a brief inspection of the best and proven factories in Europe and China, which are safe for our customers.

For the correct and high-quality installation of a stretch ceiling, it is important not only how it will be, but also who makes and installs it. If the customer has decided to install a stretch ceiling at home, then the first thing he will ask is who to turn to for help. Many companies provide not only direct installation of the ceiling, but also the services of a designer who will help you deal with the view.

Among the manufacturers of ceilings there is a rating of the best specialists.

Here is the TOP list:

• Barrisol;
• Alkor Draka;
• extenzo;
• Newmat;
• Clipso.

It is necessary to say a couple of words about each. Barrisol is a French company. A distinctive feature of the ceilings of this company is the thinness - about 0.18 mm, as well as high strength. This is the world leader in the ranking of the best stretch ceilings.

The second place is also rightfully occupied by the French company Alkor Draka. In production, multi-stage control is carried out, which guarantees high quality. The company also offers a choice of eight different textures of the ceiling.

Also, the French Extenzo is famous for its ability to maintain the height of the room, hiding space for the ceiling as little as possible. Another company from France - Newmat has a representative office in Russia. Their difference from competitors is the amazing tightness of the ceilings, as well as the highest level of service.

Fifth in this ranking is the Swiss company Clipso. Their calling card is extra-wide blades, which allows you to spend less effort when pulling over long distances. And also, the company supplies its coatings with antistatic impregnation, which also protects against dirt.

Stretch ceilings: reviews about firms

Most of the happy owners of stretch ceilings are sure that they made the right choice. Indeed, such ceilings are comfortable, reliable and beautiful.

People in the reviews note other benefits:

• Even complex multi-level ceilings are installed in just a few hours;
• The ceiling can be of any color and shape, as desired;
• Complete transformation of the interior;
• Functionality;
• Reliability.

If the repair was carried out by professionals, then the ceiling will last a very long time.

People's love was deserved not only by French manufacturers, but also by German ones. European leaders are Pongs and Genvik, the best manufacturers of stretch film in this country. Both companies have earned high praise from customers, and also have branches in Russia.

Pongs and Genwick are liked not only by buyers, but also by craftsmen who work with ceilings. Professionals note the modernity, functionality and convenience of working with the material of these companies.

What are the manufacturers of stretch ceilings

Of course, other countries producing stretch ceilings, such as China and Belgium, have also occupied their niche. The "golden mean" in the price-quality ratio is precisely the Belgian stretch ceilings. China is inferior in quality, but the price is incomparably lower. Russia also distinguished itself and ended up in the top ten best world manufacturers. Russian firms in this list are represented by Saros Design. Production facilities are open not only in Russia, but also in Ukraine, Estonia and Germany.

The SarosDesign trademark has developed an application for Android and iOS, in which you can create your own drawings for stretch ceilings. There are no analogues to this yet.

Companies engaged in the production of stretch ceilings are also often ready to provide various components, such as platforms for lamps, profiles, fasteners.

Other brands are well-known in Russia:

• Ecofolie
• Arridel;
• elegant;
• Cool Stretch;
• Dexfort.

Each of the above companies has all the necessary safety certificates. The film is made on modern equipment, has passed all the tests and is approved by many commissions. This guarantees high quality and reliability. Good manufacturers of stretch ceilings are divided into only three areas: Russia, China and Europe. Which country of manufacture to choose is a personal matter for everyone. But do not forget that classic ceilings are also called French. For many years, France has been a leader in production, and still an unattainable leader. Prices, of course, will bite, but the ceiling will be reliable and of the highest class.

An important point when choosing a ceiling of foreign production is that they all have representative offices in major cities of various states, so there will be no problems with delivery.

Some of them even open their branches, where you can not only order the selected ceiling, but also hire craftsmen to stretch it directly, as well as consult on materials, shapes, colors and sizes. In order to avoid any errors and eliminate the possibility of forgery, it is enough to ask for certificates of compliance with all requirements. Large manufacturers vigilantly monitor their reputation, so it is better to turn to well-known companies - the likelihood of fake and poor quality is minimal. But "attractive" firms without certificates and with amazingly low prices are best avoided. Of course, such firms can do their job well, but this will be rather a pleasant exception to the rule.

Stretch ceiling companies

Among the popular firms that have won the trust of customers, there are still many, many more. For example, the only well-known Chinese manufacturer of stretch ceilings is Gline. There is no need to be afraid that this is China, because the company really supplies quality canvas at an affordable price.

Also, among the good companies appeared:

• Russian Fran Studio;
• German Descor;
• Italian Malpensa;
• Belgian Polyplast PTMS.

These manufacturers are not so well known, which did not affect the quality of their products. Feedback from consumers is only positive - all technical indicators of products are on top. All companies are developing, adding new technologies, additional services, fresh ideas for the execution of ceilings.

The list of services provided in Russia is not as large as that of the world's titans, but all the main popular items are always available.

Thanks to the production in different countries, there are no problems with delivery. Branches and representative offices are constantly opening, and prices are much lower. When choosing a material for the ceiling, you should definitely pay attention not only to large corporations, but also to stable, but not too huge firms.

All about the production of stretch ceilings (video)

Determining which ceiling to do is sometimes very difficult. But it is even more difficult to choose which manufacturer to choose in order to seek help, advice and delivery of materials. The choice is huge, so it is best to cooperate with trusted companies.

When starting repairs in an apartment or house, special attention should be paid to finishing the ceiling, which is the most important detail of any interior. The ceiling surface catches the eye from the very threshold.

The coating should not only be beautiful, but also have certain performance characteristics. There are a lot of finishing options, however, stretch ceilings, in recent years, have firmly established themselves at the top of the rating.

Let us consider in detail what products are offered by the main manufacturers.

Kinds

They have gained popularity due to their excellent appearance, ease of installation and excellent properties that remain unchanged for many years. , which lasts only a few hours, there is no debris left. The surface to be closed does not require preparation, all communications and possible defects will be hidden by the material.

It is a canvas and a frame (baguette), made of plastic or duralumin, for its installation.

The canvas can be made of fabric (polyester) or PVC.

Read also:

Comparison of woven and film types:

The variety of models presented on the market allows you to choose a coating for any interior.

Film ceilings are presented by manufacturers in a wide range of different shades and textures: glossy, with metallic and mother-of-pearl effects, satin and marble, perforated (imitating the starry sky when the lights are off), plain and printed. A translucent film may be used for the illumination device.

Photo printing can be applied to order using eco-solvent, ultraviolet, latex methods. The cost of such a service ranges from 1 to 2 thousand rubles. per square meter.

The ceiling, made of fabric, can only be matte. However, it can be painted with acrylic dyes, and if you are tired of coloring, repaint it.

When choosing the type of ceiling covering, you should pay attention to the purpose of the room and your own wishes for decorating the surface. Having studied the performance characteristics of both types of ceilings, you can choose the right option for your room.

Consider what the best manufacturers of these products represent in Russia.

Leading manufacturers

Important! Products offered on the domestic market must be certified in accordance with the regulatory standards of the Russian Federation.

The most famous and reputable are French companies. Their products are of excellent quality, long service life and excellent appearance. Moreover, the very technology of the ceiling covering device has long been called "French stretch ceilings".

Determining which manufacturer is better is quite difficult. You should focus on the proposed textures and colors, properties, some installation nuances, as well as your own wallet.

Ceilings from France

Several large companies supply their products to the Russian market.

The best of them:

• Barrisol

Normalu, which produces its products under the Barrisol brand, has been in production for almost 50 years. During this time, constantly improving production technologies, she received more than 80 patents.

Their collection exceeds 200 shades. Films used by Normalu have M1 flammability index according to French requirements. Its thickness is only 0.17 - 0.18 mm.

The product line is characterized by a large selection of standard models, as well as acoustic, light, perforated ceilings. Photo printing allows you to create a luxurious and unique image.

The price for the products of this company is 1200 - 1400 rubles / m2.

• CTN (Creations et Techniques Nouvelles)

This French brand has been on the market for 30 years. Its factories are also located in Belgium, Spain and the UK. CTN film has the highest category for environmental safety "A+".

Suggested coating textures:

1. glossy
2. matte;
3. satin

Multi-colored films with suede effect are in great demand.

The width of the paintings is 1.4 and 2.2 m and cost between 500 and 1100 rubles / sq.m.

• Extenzo

The production of ceilings has been established at this enterprise for about 30 years, and the products have proven themselves on the Russian market from the best side. Very durable (tensile strength 120-150 kg / cm2), resistant to various influences, the canvas will decorate the interior for several decades.

With the help of the unique Extenzo fastening system, it is possible to take care of the height of the room. Structures can be installed only 3 cm from the base surface.

1. The color scheme includes over 100 options, several textures are also produced: matte, glossy, satin, “under the skin”, “under the suede”, metallic.
2. With antibacterial impregnation.
3. Film thickness: 0.15 - 0.2 mm.
4. The width of the canvas is 1.3 - 2 m.

The average price is 900 - 1900 rubles. per square meter.

German

Manufacturers from Germany have also been producing successfully for a long time, their products are no less popular.

• Pongs (Decor)

The concern has been in production for more than 40 years.

Available in 130 shades of glossy and matte materials. The width of the sheets: 1.5, 2.2 and 3 m. The thickness of the film is 0.18 mm.

Fabric materials have a small cell, they are smooth to the touch. The collection contains an interesting texture called Alupigment. Thanks to the applied metallic sequins, the fabric plays interestingly when the light is on.

Ceiling "Alupigment"

Prices start from 1000 rubles.

• Lackfolie

The company was founded in Germany, but after 12 years of existence, the production of PVC films was transferred to the Czech Republic.

1. Glossy canvases have a width of 1.3 m, matte counterparts are supplied in a two-meter version. Thickness 0.16 - 0.18 mm.
2. A layer of antiseptic can be applied to the canvas, which eliminates the possibility of mold or fungus.
3. The price of the canvas starts from 500 rubles.

• Renolit AG

The concern has been manufacturing for 70 years, has more than 30 enterprises scattered around the world. The company's assortment includes more than 200 types of colors and textures.

The ceilings of this German manufacturer look expensive and noble. They are made from a super strong, breathable, anti-static, safety film.

The cost of 1 sq.m starts from 700 rubles. and reaches 2000 rubles.

From Switzerland

• Clipso

Clipso can be called the ancestor of the production of fabric fabrics.

1. This manufacturer can also be attributed to the line of French enterprises. Since the film used in the production of ceilings is produced in France.

1. A distinctive quality of these ceilings is the ability to use them for re-installation. The polyester in the canvas is impregnated with polyurethane, which allows to increase its water resistance.
2. The line includes acoustic models, light-transmitting, antibacterial fabrics.
3. Clipso products have been awarded the A+ environmental category.
4. For installation, a baguette is used, during the installation of which a plinth is not needed, since a strip of no more than 4 mm remains in the visible area.

Cloths are produced up to 5.1 m wide. The price can vary from 700 to 1500 rubles.

• Cherutti ST

The reliability, safety used in the production and installation of the fabric, and high quality components, as well as the muted color of the fabrics, will delight you for a long time. They are completed with a patented plastic profile that prevents the possibility of sagging of the web, as the instructions for its installation promise:

Thanks to the double-sided impregnation of fabrics with polyurethane, as well as the application of a layer of varnish, the moisture resistance of the material is achieved.

Comparison of textures of three fabric manufacturers:

1. In appearance, the material resembles a satin PVC texture. Mostly painted in pastel shades.
2. The most important indicator of Cherutti products is environmental safety. It is possible to install in children's and medical institutions.
3. Separately, I would like to mention the acoustic models of the Italian manufacturer, which provide excellent sound insulation due to the foamed sound-absorbing layer.

1. Available in widths of 2, 3.6, 4, 4.4 and 5 meters.
2. The price exceeds 950 rubles. per 1 sq.m.

Products from Belgian manufacturers

Belgian manufacturers offer products at a more budgetary price compared to French ones.

• Polyplast (Polyplast Trading & Manufacturing Company (PTMC))

The company produces film and fabric types. The width of the canvases ranges from 3.2 to 5.5 m.

It should be noted that the film supplied by this manufacturer is made in China or Argentina, where the concern has factories, but it cannot be said that it is of poor quality. The price of a kit from the manufacturer Polyplast: an average of 800 rubles per square meter.

Italian

• Malpensa S.R.L.

The company has been manufacturing for only 10 years, but managed to establish itself in this market. The product line includes glossy, satin and matte finishes.

The width of the film is 2.2 m, its thickness is 0.13 - 0.22 mm. The cost of the film: 270 - 450 rubles / sq.m.

From Holland

• Alkor Draka

The manufacturer has been producing PVC film and ceilings for 60 years, constantly improving technologies. Production plants are located in Holland and France.

In the collection of materials, in addition to standard models, you can find marble, moire or suede textures. Film width: 1.5 m. The cost per 1 sq. m is quite high: 1400 - 1800 rubles.

Chinese

Chinese ceilings are increasingly being introduced into our market. Often these films do not differ in quality and durability, but there are several factories whose products can compete with European ones.

1. Web width: up to 5.1 m.
2. Film thickness: 0.17 - 0.18 mm.
3. The film is made from environmentally friendly plastic, has an antibacterial coating.
4. The products have been certified according to ISO, received the category “A +” for environmental safety, and were assigned the class “KM1” for resistance to fire.
5. MSD manufactures glossy, matte, mirror, pearlescent, translucent and printed film.
6. The cost starts at 300 - 350 rubles / m2. There is currently an upward trend.

The plant of this company produces film for many well-known concerns, it has excellent characteristics.

• GLINE

The technologies and quality control introduced at the plant make it possible to produce ceilings that fully comply with European standards.

1. Fabrics up to 5.6 m wide are produced. The choice of textures is quite diverse: glossy, satin, matte.
2. Cost: from 500 rubles/sq.m.
3. But not everything is rosy with the quality of Chinese products. Often, suppliers offer Chinese counterfeit products from European factories.

If you do not know how to determine the manufacturer, then you should look for markings along the edge of the canvas. Europeans usually put it there. When there is no European stamp on the canvases, most likely the film was made in China.

Also, if there is a European stamp, and the width of the PVC sheet exceeds 3 m (which is not found among manufacturers from Europe), this may mean the supplier is dishonest.

Important! The marking of German manufacturers is often applied to Chinese products.

Counterfeit products, which are presented as products of well-known concerns, are difficult to distinguish visually. However, over time, after installation, a fake will make itself felt.

Russian companies

• Saros design

The company has been manufacturing since 2000. Currently, products are manufactured at 8 factories.

The technology makes it possible to produce canvases up to 5.5 m wide. Several textures are offered to customers: glossy, matte, satin. Technologies have been mastered for the production of variants with the effect of a starry sky, as well as acoustic products.

The cost, depending on the type of invoice, varies between 670 - 900 rubles / m2.

• simplex

• Vipsiling

The plant has been in production for a little over 10 years. The production of film and fabric canvases has been launched. The price of coatings starts from 550 rubles.

Not so long ago, a new technology has appeared that combines the advantages of film and fabric materials.

• cool stretch

Ceilings made using this technology are devoid of many of the disadvantages inherent in film coatings:

1. film installation is carried out without the use of heat guns;
2. operation is possible at temperatures down to minus 30;
3. lack of smell;
4. the width of the canvases reaches 3.6 m, which allows finishing without seams in not too large rooms.

Thanks to the emergence of this technology in country cottages and loggias, you can use the finish with a more economical material. It is worth noting that the Russian manufacturer "Simplex" offers similar seamless PVC ceilings produced using ICE technology. Cost: 600 - 700 rubles. per sq.m.

Also read other parts of the article:

We suggest watching a video on this topic.

It is difficult to immediately answer the question of which manufacturer of stretch ceilings is better. There are giants on the market: French, Germans and Swiss.

Their products are time-tested, but quite decently worth it. They are breathing down their backs from Chinese and Russian companies that have been producing not so long ago, but are gradually bringing the quality of products to European standards.

In order not to have to repeat the finishing process over time, you should carefully study the characteristics of each brand, familiarize yourself with the certificates and consult with experts.

Publication date: Mon, 22/01/2018 Categories: News, Reviews & Trends, Q&A, Content

Sometimes there is an opinion among people that the company that installs stretch ceilings is itself engaged in their production. In the vast majority of cases, this is not the case. We work with materials from different manufacturers, each of which has its own advantages and characteristics. It is impossible to single out the best one among them. But let's see how they are similar and how they differ.

Stretch ceilings MSD

The company producing these ceilings is located in China, in the city of Haining. Founded in 2002 and by now has grown to one of the market leaders in the budget segment. The company's products are imported to more than 40 countries of the world, the manufacturer has 17 patented technologies.

Stretch ceilings MSD one of the cheapest. In their production, an inexpensive film is used. In addition, China, as you know, is famous for its cheap labor force, which also significantly affects the cost. So, if you decide to install inexpensive stretch ceilings, pay attention to canvases from MSD.

Glossy, satin and matte films are available in 76 colors to choose from.

Stretch ceilings PONGS

PONGS is a German manufacturer with over a century of history. The founders of the company began to take their first steps at the beginning of the 20th century, engaging in textile production. Over the course of a century, the company has become one of the world leaders in the production, including stretch ceilings.

PONGS attaches great importance to the environmental friendliness of production. This applies to both the technical process itself and the materials used. PONGS ceilings comply with European standards set for this product category.

Despite the above, these German stretch ceilings are relatively inexpensive. This is due to the excellent optimization of production and well-organized logistics.

You can choose from satin, glossy and matte surfaces in 73 colors.

Now let's look at more expensive options that are still popular.

Ceilings

Descor is a trademark of the PONGS company we already know. Under it, the German manufacturer produces fabric stretch ceilings.

The peculiarity and main advantage of Descor stretch ceilings is a special complex knitted weaving, which gives the fabric strength. The technology is patented and has a separate name - Trevira CS. In addition, polyester fabric is impregnated with polyurethane to give the desired properties.

Descor ceilings have a smooth, even surface in a classic white color (this is what you can order from our company). The production lines allow the production of fabrics up to 5 meters wide. For many rooms, this means the possibility of installing a seamless stretch ceiling.

Descor is a great option for those who love the classic look of a perfectly flat white ceiling.

Stretch ceilings Clipso

Clipso is one of the recognized leaders among stretch ceiling manufacturers in Europe and worldwide. The head office and production of the company are located in France, branches are open in the UK, India, USA, Russia. Clipso maintains the highest quality standards to rightfully be called the leader in production in the homeland of modern stretch ceilings.

Ceiling sheets are made of polyester fibers and impregnated with polyurethane. In combination with complex weaving, this gives high strength and reliability in operation. Clipso ceilings after installation do not give any smell thanks to the use of patented technologies in production. Cloths are produced up to 5.1 meters wide, thanks to which it is possible to install seamless structures in rooms of small footage.

Our company has a wide range of Clipso ceilings to choose from:

• Acoustic ceilings in standard white;
• Colored ceilings;
• Translucent, with transparency 30, 50 and 70%;
• Moisture resistant, antibacterial;
• Ceilings with mother-of-pearl-metallic sequins.

In addition to the options described above, you can choose ceilings from TECHO with an exclusive design: galaxy, drops, clouds, metallic, starry sky. Given the possibility of mounting multi-level structures from those ceilings that we offer, you can create unique design solutions.

See options for materials and designs in the TECHO catalog.

What ceilings to choose?

It is impossible within the framework of the article to immediately give relevant advice for everyone on choosing a stretch ceiling. A more effective solution would be to ask for help from our consultants who will tell you everything that interests you.

A measurer will help you to determine more precisely, who will bring with him samples of fabrics, a catalog and give recommendations on all emerging issues. With him, you will discuss the cost of certain ceilings for your particular room. In addition, calling a measurer is absolutely free. Contact us!

TECHO editors,
Mon, 22/01/2018

In Russia, film manufacturers for stretch ceilings from France, Italy, Germany and China are popular. We have compiled a selection of proven companies that have certificates confirming environmental friendliness, safety and quality. Of course, the premium options remain the best. They have a large number of colors and textures, environmental friendliness, the ability to withstand floods and not absorb dust.

Films from popular manufacturers in Russia

Manufacturers from Europe do not have canvases wider than 3 meters, which means that the installation will only be with seams. Only the French ClipsO has released a unique line up to 5 meters wide for seamless mounting without a heat gun.

Below in the table are the most popular French suppliers of PVC film for stretch ceilings in Russia:

As you can see, the "French" can be reused after repair (removed and re-mounted), but the prices "bite". Often, Russian consumers choose French ceilings because of the suede texture.

Chinese manufacturers have wide canvases up to 5.5 meters, allowing you to mount ceilings without seams, the assortment has different textures (including acoustic options, printed films), as well as a budget price, up to 1000 rubles per square meter. meter (more often - 700-800 rubles).

Now most of the certified manufacturers from China supply good materials. The only supplier that does not rely on quality is Longway film for stretch ceilings. They have a low price, but a high percentage of defects.

Of the popular Chinese manufacturers, it is worth highlighting MSD - it was he who was highly appreciated in Europe and is the leader in sales in Russia.

Film MSD (China)

MSD is a conscientious Chinese manufacturer of premium stretch ceilings. Their products are certified according to European standards. Due to the fact that the quality is high and the price is reasonable, MSD ceilings have become the bestseller among film manufacturers in Russia.

The plant confirmed the quality by obtaining certificates for its production of films for stretch ceilings:

• ROHS - confirms that the film contains no heavy metals, phosphorus, benzene;
• EN71-3 - indicates that the products are safe for children;
• REACH - confirms that the requirements of the European Union for the safety of human health are met.

By the way, certification for sale in Russia is not required by law, but the manufacturer passed it anyway, which is only a plus for his reputation.

Important! Many Russians want European quality, but fall for fakes: for 1,000 rubles per linear meter, they are sold Chinese ceiling film of unknown origin. Therefore, if you cannot find a reliable supplier, then it is better to give preference to MSD - it will be China, but tested and certified in Europe.

White MSD (MSD) film for stretch ceilings is closer to blue in shade. The raw material for the film is produced in Taiwan and China with environmentally friendly DOFT plasticizer and does not contain chalk. It is odorless, fireproof and can suppress noise (1 m² ≥ 2500). Durable: withstands soldering, does not tear at the seam.

The table below shows the specifications for MSD film.

german film

German film for stretch ceilings is not the widest: most often up to 1.8 meters, sometimes - 2.7 m. Lackfolie has matte and satin lines up to 2 meters wide, and Pongs - up to 3.25 m.

Warning: in German film, the width of 3.25 meters is the maximum! Anything wider is fake. Therefore, German ceilings are mounted mainly with seams (without seams - rooms up to 8 square meters).

We selected three popular German manufacturers in Russia: their films are flame retardant, waterproof, environmentally friendly, and in about the same price category. The minimum lowering of the ceiling is 3 cm. Due to the water resistance, the ceilings "breathe" worse, so you need to ventilate the rooms. But it reliably protects the repair from flooding by neighbors.

Italian film

Italian stretch fabrics are famous for their aesthetics and often belong to the elite class. Despite the European standard, they are also available in wide versions. For example, Cerutti refers to seamless ceilings up to 5 meters wide - mounted using the "stretching of an artistic canvas".

If you want European quality and seamless installation, then Italian canvases will give you this opportunity. In Russia, in addition to Cherutti ST, the manufacturer Malpensa is also popular.

If you want a quality, but more budget option, then you should look at MSD, Malpensa, Lackfolie or Renolit. For those who need to protect the ceiling from harsh operating conditions (high humidity, the constant threat of flooding) or want special interior solutions, you can order Cherutti or Extenzo.

Below - reviews on the film MSD, Cerutti and Barissol for stretch ceilings.