The floor and walls must be carefully protected. The use of coating waterproofing will simplify the work and reduce time. Water will not be able to penetrate the wooden elements, and this will increase the time before repairs in the house. What liquid waterproofing for floors and walls is more practical and economical, we will talk in this article. Readers will learn how to apply liquid insulation and what equipment is used for this.
Liquid waterproofing has been used to protect the walls and floors of a wooden house for more than 15 years. During this time, the materials showed themselves only on the positive side. And the solidity of the coating makes the liquid material indispensable among other protective ones.
According to the application method, liquid insulation is divided into:
All methods refer to the cold method; therefore, it is not necessary to use a burner and other heating equipment. This speaks to the safety of the application. The most effective application is by spraying, using special equipment.
Of course, the equipment is not cheap, but the cost of labor is significantly reduced. The volume of work of 3 people is easily performed by 1 worker.
You can try to rent equipment for special tools, but there it is found only in large cities. You can buy home processing equipment once, and the price for it will cost all subsequent repairs.
Advantages of liquid waterproofing: 
- The protective layer is elastic.
- Easily covers small cracks and crevices.
- Resistance to mechanical and chemical influences.
- Easily tolerates temperature changes and UV rays without losing its properties.
- Under mechanical action, it restores the primary shape by 95%.
- No need to use gas and cooking heaters.
- 85% waterproofing sets within 1 hour.
- Guaranteed to last up to 25-30 years.
Types of liquid protection of floors and walls from water
There are several different types of bituminous and bitumen-polymer based with various additives. But rubber and glass received the most feedback. Let's consider them in more detail.
Liquid rubber to protect the elements of a wooden house
Liquid rubber is suitable for waterproofing walls and floors, especially from the basement side. It has high hydro and sound insulation. The material has high adhesion to wood, and it is better to apply using special equipment. Therefore, most of the installation is carried out by professionals. The owner only needs to determine the brand of material needed for a particular job.
You can buy these brands in barrels of 200 liters. For example, liquid rubber Rapidflex, Technoprok.
There are varieties of liquid rubber that you can work with with a spatula or roller. these are made by hand. You can buy these brands in 10 and 20 liter buckets, for example, TechnoNIKOL or Slavyanka.
Liquid rubber is a bituminous emulsion diluted with water, so the material is environmentally friendly and has no foreign pungent odors.
Floor application specifics
The floor can be treated with liquid rubber from the outside and inside. But it should be borne in mind that the outer side treated with rubber will be black, so it is more advisable to use protection with a subsequent coating, such as laminate, linoleum or tile.
Liquid waterproofing for the floor is applied with rubber in one pass with a thickness of 1-2 mm. The surface is pre-cleaned of dust and leveled. If this is not done before waterproofing, then in the future it will be necessary to violate the solidity of the surface. Material consumption will be 3-4 kg/m².
Wall application
When processing the floor with rubber, it is necessary to waterproof part of the wall from the bottom by 20-30 cm. Such a scheme with rubber is especially necessary in bathrooms and kitchens, where the humidity is high and various leaks are possible. On the walls it is better to take the brands Elastopaz or Elastomiks. The composition is applied manually, so you can do the waterproofing of the walls with your own hands. You can buy in containers of 10 and 18 kg, consumption 3.5 kg per m2 of wall.
Relevant treatment of walls with rubber basement and basement. Moreover, liquid rubber can be used both on internal walls and on external ones. The material is applied at a temperature of +45 to -50 ° C, so work can be done at any time of the year.
More details on the processing of the floor and part of the walls can be seen in the video:
Liquid glass to protect the elements of a wooden house
Liquid glass is a solution of water with potassium and sodium. By its action, waterproofing is penetrating. It does not create a film on the surface of walls and floors, but penetrates into the capillary system and freezes there. This forms a dense inner layer, which does not allow moisture to penetrate into the tree. In addition to the protective properties against water, the material has good antiseptic qualities. Such properties are given to it by sodium silicate and potassium solution. Sodium crystallizes in the wood and makes it resistant to moisture.
There are two types of such glass:
- sodium.
- Potassium.
Sodium is able to interact with other mineral compounds. They use waterproofing with liquid glass to treat basement walls, foundations and instead of antiseptics for wooden floors.
Potassium has a large crystallization and withstands various mechanical damage. It is advisable to use such a composition in wooden houses for processing walls and flooring.
Liquid glass technology
Before application, the glass composition must be diluted with water. To cover the floor and walls, when a wooden house is being processed, a little composition will be needed, since the consumption of liquid glass is a maximum of 300 g per m2.
Floor insulation in a wooden house
To protect the cement screed, when building a log house, it is necessary to add liquid glass to the concrete mixture in a ratio of 1x10. Use such a coating for screeding basement floors, garages, pools.
If the floor is wooden, then the application technology is carried out with a brush or roller. The process resembles silicotization. When applied, the material is quickly absorbed into the wood and creates a protective layer there. You can process the floor inside the house and from the basement side. At the same time, do not forget about the logs, which also need to be impregnated with liquid glass even before laying. the composition is applied to the floor in 3 layers.
Wall processing
The technology of applying to the walls is little different from the floor with a brush and roller. For example, by covering the beam with liquid glass, you can fill in small cracks after shrinkage, which will be difficult to caulk. It is convenient to cover the walls not only in the house, but also in baths and basements. The walls of the foundation are also often covered with a composition of concrete with liquid glass.
Before applying to the walls, they must be leveled and, if this is an old structure, remove paint or varnish. Then the surface is degreased with ordinary alcohol. For the maximum deep penetration of 15-20 mm, it is necessary to apply the composition in 2 layers. When processing walls from the street side, work can be facilitated using an airbrush. Inside, it is not recommended to apply material to the walls in this way. When applying liquid glass, be sure to use protective equipment: respirators, gloves and goggles.
The price of various liquid waterproofing
You can buy liquid waterproofing at any hardware store. The price of the compositions depends on several factors:
- The brand, so the compositions of TechnoNikol are almost 2 times more expensive than Slavyanka.
- Volume, so the composition of a barrel costs 1 kg cheaper than a bucket of 10 liters.
- Party, all manufacturing companies offer to buy in bulk.
- The composition, various synthetic additives are not cheap and the price of waterproofing varies.
- Impregnating compounds are cheaper than liquid rubber at times.
- In the online store, the compositions are cheaper, since the seller does not need to overpay by hiring a large staff and renting a retail space.
- You can buy cheaper waterproofing from ads, many put up for sale the remains after the construction of their house.
- Imported manufacturers offer to buy their compositions at an inflated price, as they enter the Russian market through several repurchase sites.
The average price for waterproofing is presented in the table:
For greater efficiency, the floors and walls of the basement and basement of the house can be covered with two compositions. First, liquid glass is applied to the cleaned surface and after it has completely dried, liquid rubber is sprayed. Such a liquid waterproofing cake is not even afraid of a flood.
For a simple country house, you can use cheap liquid glass, and for a private residential building it is better to use solid rubber.
Wood (a versatile and widely used building material) needs reliable and long-term protection. Conventional ones, which are mainly used for these purposes, are prone to cracking and peeling over time. Relatively recently, rubber paint for wood, which has appeared on the construction market, due to its unique composition, is devoid of these shortcomings. High consumer and technical indicators contribute to its growing popularity, especially in individual construction.
Composition features
The term "rubber-based paint for wood" is not quite correct in relation to this protective coating. Rather, it defines the properties and technical performance of a given product. In fact, the latter consists of:
- acrylic - the main synthetic polymeric binder that forms a protective film on the treated surface;
- latex, which is obtained chemically from artificial rubber (it is he who gives the coating superelastic properties);
- coalescent (for better film formation);
- pigments that give the composition a certain color;
- water as a solvent;
- antifreeze, which significantly increases the frost resistance of the coating;
- special additives and fillers that increase the resistance of the composition to aggressive environments (salts, alkalis, etc.);
- antiseptic components that prevent the formation of fungi and mold.
Although almost all ingredients (with the exception of water) are produced by various chemical reactions, the final composition is absolutely environmentally friendly, safe for humans and the environment and complies with all necessary rules and regulations.
Main characteristics
Rubber paints for wood are characterized by:
- water resistance;
- high resistance to daily and seasonal temperature changes;
- good adhesion with all building materials made of wood (timber, plywood, boards, fiberboard, chipboard, and so on);
- durability (guaranteed service life while maintaining the protective properties of the coating up to 10 years or more);
- high elasticity;
- good vapor permeability (which favorably affects the "breathing" properties of wooden structures);
- high mechanical strength and resistance to abrasion (especially for rubber on wood);
- increased anti-slip properties (which significantly increases safety when using, for example, stairs);
- resistance to the negative effects of ultraviolet radiation (the coating does not change color for a very long time);
- sufficiently economical consumption at a high layer density (although this figure is higher than that of traditional analogues);
- ease of application;
- high drying rate;
- the possibility of applying to a cracked surface (without prior puttying);
- lack of smell;
- ease of further care with the use of any household detergents.
Flaws
It is unlikely that you will be able to find at least one product in the modern market of high-tech and innovative building materials that does not have any disadvantages. So rubber paint has them, although there are very few of them:
- the treated surface will be matte (glossy shine cannot be obtained due to the components included in the composition);
- the price of such coatings is higher compared to standard (alkyd, acrylic or oil) compositions.
Application area
Rubber paint for wood for outdoor use is successfully used in the arrangement of a protective coating:
- external facades and technological building elements of props, etc.) buildings for various purposes (from a residential country house to a garage or barn);
- fences and barriers;
- plank floors (on open terraces, gazebos and balconies);
- elements of stairs (steps, railings, balusters and load-bearing structures);
- decks and platforms designed for the convenience of using artificial and natural reservoirs;
- children's playgrounds and sandboxes;
- hulls and elements of boats, boats and yachts.
Surface preparation
Naturally, the most optimal solution for arranging a protective layer is the application of rubber paint for wood outdoors on new or newly built structures and structures. The pores of the building material are not yet clogged with dust, dirt or other foreign inclusions. Longevity will only benefit from this.
Old surfaces planned for processing must first be thoroughly cleaned with a spatula or scraper, and then with a metal brush or a special nozzle for an electric drill.
Application method
Almost all manufacturers of rubber paints for wood for outdoor use recommend the following work conditions, the observance of which will ensure the preservation of the protective properties of the coating during the warranty period:
- The ambient temperature should be between +5° and +30°C (intercoat and final drying time indicated on the package is usually for +20°C).
- Humidity - do not exceed 80%.
For application, you can use any painting tools: brushes, rollers, spray guns and other mechanical sprayers.
Before application paint needs to be mixed carefully. When using sufficiently large volumes, this procedure must be repeated periodically.
Since rubber paint for wood is usually applied in 2-3 layers, it is necessary to strictly observe the time interval between them recommended by the manufacturer.
Main manufacturers
Russian manufacturers of various paint and varnish products appreciated the advantages of the new protective coating and quickly mastered the development and production of such products. The most widely represented on the construction market are rubber paints for wood from Super Decor, Master Good, Balticolor, Rezolux, Dali, LKM USSR, Technoprok.
Naturally, each brand applies its own individual “recipe” for manufacturing and technological features of production. However, everyone strictly observes the requirements that ensure the safety of people and the environment.
Varieties and prices
The color range of currently sold compositions is quite diverse. For some manufacturers, the number of shades of finished products reaches 20. For those who supply products in basic white or light gray, you can either order a specific shade from the catalog, or purchase tinting pigments separately and engage in independent “design creativity”. It all depends on personal preferences and time, which is sometimes so lacking for aesthetic experiments.
By purpose, such coatings can be divided into three main groups:
- universal (for application to walls and other wooden structures of various buildings);
- increased wear resistance (for floors and;
- highly specialized (for wooden vehicles on water).
The price of such products depends on the application, composition and manufacturer. So, a can (3 kg) of VD-AK-103 universal paint (base color) from Technoprok will cost 600-700 rubles. Approximately the same price for goods from Dali. But, for example, the same amount of finished color products (of a similar purpose) from Super Decor (consumption 120-250 ml / m², full curing time - a week, technological break between layers - 1.5-3 hours) will cost 850- 950 rubles. Moreover, only imported components were used for its manufacture (according to the manufacturer's own statement).
Products from German Remmers, Spanish Lepanto or Canadian Liquid Rubber will cost much more.
For wooden boats, boats and yachts
- protection against the aggressive influence of salt water;
- preventing fouling of the bottom with algae and microorganisms, which significantly reduce speed and increase fuel consumption;
- increase adhesion during operation in conditions of high vibration.
Due to the increased operational requirements, the price for such products is higher than for analogues for general construction use. Manufacturers involved in the production of such highly specialized products: the Norwegian Star Maling, the Russian Balticolor and LKM USSR, and the American Overton’s and Totalboat.
Finally
Modern rubber paints for wood, the reviews of users who have already used these products in practice, are mostly only positive, they fully correspond to the declared characteristics. Indispensable conditions that must be observed:
- when choosing, take into account the purpose of a particular product (for example, only for vertical surfaces, for floors or for boats and boats);
- when using - strictly follow all the recommendations of the manufacturer, which are indicated on the package.
A mandatory stage in the arrangement of floor coverings remains the vapor barrier of the floor. It allows you to regulate the humidity in the room and reduce the negative impact of moisture on the structural elements of the building. Vapor barrier materials protect the insulation layer from getting wet and losing heat-insulating qualities.
Why is vapor barrier needed?
Do-it-yourself floor insulation from moisture
In any room there is moisture that negatively affects wooden structures. Vaporous moisture is a normal product of human activity. It is released during cooking, washing, showering, etc. Steam has a high pressure compared to atmospheric air, therefore, when released, it begins to put pressure on the surface of walls, floors and ceilings, leading to the formation of condensate. Wood under such influence begins to rot, and mold and fungus form on it.
The structure of the floor is also negatively affected by the moisture contained in the soil. As a result, it begins to slowly lose its performance and collapse. Heaters are filled with water and lose their heat-shielding functions. The floor becomes cold, and the house ceases to be comfortable and cozy.
These problems can be avoided by high-quality vapor barrier. A properly equipped vapor barrier layer allows you to protect wood and insulation, but at the same time gives them the opportunity to breathe.
Vapor barrier materials
Vapor barrier floor in a wooden house can be made of various materials. Manufacturers offer a wide range of them. The most common in wooden housing construction are film and membrane products. For concrete floors, the best choice is bitumen-polymer mastics, polymer rubber, etc.
Film materials
Film vapor barrier is easy to install. As a rule, perforated and non-perforated polyethylene film is used for floor protection.
Perforated materials have a higher degree of vapor permeability, but in practical use this difference is hardly noticeable. Laying the film is very simple, but it is easily damaged and quickly torn, so care must be taken during work.
A variety of polyethylene films are materials with a reflective aluminum layer. They have higher vapor barrier characteristics, so they can be used for floors in rooms with high humidity.
Polypropylene films, unlike their polyethylene counterparts, are characterized by strength and resistance to negative effects. On the one hand, a layer of viscose and cellulose is applied to the film. It is able to retain a large amount of moisture and thereby protect the floor insulation from the formation of condensate from the side of the film insulation. Lay the film with the protective layer down.
membranes
The highest quality, but also the most expensive vapor barrier material are diffuse membranes. Unlike films, they have the ability to "breathe". The membrane can pass air, thereby regulating the level of moisture. The material can be one- and two-sided, depending on whether air is passed from one or two sides.
The laying of a double-sided membrane has no restrictions. When arranging a vapor barrier using a one-sided material, you will have to follow which side it is laid with respect to the insulation.
The main advantage of breathable membranes is the highest vapor permeability coefficient among all materials. It is achieved due to the special microstructure of the artificial fibers from which this type of vapor barrier is made. In three-layer membranes, another layer is added that can accumulate moisture in itself and gradually evaporate it.
The most expensive membranes combine hydro, steam and thermal insulation characteristics.
The floor vapor barrier using this material provides the so-called "intelligent" adjustment of the humidity level depending on the microclimate in the room.
It is impossible not to note one more important advantage of such materials - they can be laid without a ventilation gap.
Liquid rubber
Liquid rubber for bathroom waterproofing
This type of vapor barrier is used for concrete floors. Once applied to the surface, liquid rubber forms a seamless layer resembling a thin film.
The resulting protective coating has heat, hydro, steam and sound insulating characteristics. The floor vapor barrier device using liquid rubber is extremely simple. It is enough to apply the composition to the surface to be treated with a conventional paint brush.
Arrangement of vapor barrier in a wooden house
Laying the vapor barrier of the floor should be at the stage of building a house. If it is necessary to equip a vapor barrier in a finished building, then a major overhaul will be required. The work is carried out in several stages.
Training
Vapor barrier of the floor in a wooden house laid on the subfloor. If the house is just being built, there are no problems, and no special preparation is required. Laying vapor barrier materials at the construction stage is one of the stages in the arrangement of the floor.
During a major overhaul, it will be necessary to remove the floor covering and remove the heat-insulating layer. After that, the condition of the subfloor and the log is checked. All rotten or damaged elements must be dismantled and replaced. It is advisable to change the sagging boards of the subfloor. All structural elements must be treated with antiseptics and other protective equipment.
Laying vapor barrier materials
Do-it-yourself floor vapor barrier
After carrying out the preparatory work, you can lay the vapor barrier. Vapor barrier materials are located on the subfloor. The joints between adjacent strips are sealed with a special tape.
You can fix the film materials with a stapler, but it is better to take adhesive tape. This method of laying allows you to fix the material without gaps. We must not forget that vapor barrier materials are mounted on a heater with a certain side, with the exception of bilateral diffuse membranes. The correct installation must be carefully monitored, otherwise the vapor barrier will not perform its functions.
Any insulation can be laid on the vapor barrier layer. On top of it is another vapor barrier layer. After sealing the joints of the second layer of vapor barrier, you can proceed to the arrangement of the finished floor and the finishing floor covering.
Liquid rubber for wood floor insulation
Vapor barrier of a wooden floor, as a rule, is made of film or membrane materials. They are easy to install and have high performance properties. Liquid rubber and other polymers are commonly used for concrete floors.
However, polymer and bitumen-polymer materials are quite suitable for vapor barrier of wooden floors.. There are several types of liquid rubber:
- For automated application.
- Applied by hand.
Liquid rubber is the ideal material
The specific type of liquid rubber is selected based on the area of the treated floor. You can lay the vapor barrier from this material in a private house manually using a regular brush. After complete drying, the polymers form a thin layer on the surface, which completely repeats its relief. This layer is almost impossible to separate mechanically.
Liquid rubber can be used on subfloors as it is black in color and must be covered with a floor covering. In general, applying liquid rubber is quite simple, but if building skills are not enough, it is better to turn to specialists. After all, high-quality vapor barrier is the key to the durability of the entire floor structure.
Conclusion
Of course, you can do without a floor vapor barrier device. But such savings will result in rapid damage to the wooden elements and the need for a complex and costly overhaul. The choice of high-quality and effective vapor barrier materials is huge, and choosing the right one is not difficult.
Related publications
Floor waterproofing- an obligatory stage of the overhaul of the building, ensuring the protection of the premises from moisture penetration. The use of specialized liquid solutions based on a combination of bitumen with polymers makes it possible to create elastic monolithic coatings that retain unchanged strength during many years of operation. Due to the absence of any fumes house floor waterproofing can be carried out indoors without danger to the performers of the work.
Floor waterproofing services
At the turn of the century, technology was developed floor surface treatment with liquid rubber, the essence of which is to apply a bitumen-polymer emulsion to the surface, which, when solidified, forms a membrane that is absolutely insurmountable for water due to its complete tightness.
Sprayed floor waterproofing
For floor waterproofing with liquid rubber in large areas, compact and convenient Canadian spraying equipment is used. The floor must be leveled and primed before applying liquid rubber. The primer, in addition to providing a better application of the base emulsion, provides filling of minor cracks and chips. After a short wait, the main layer of liquid rubber is applied.
Compared to bulk and paint coating methods, sprayed floor waterproofing It is characterized by ease of implementation and high productivity, which is especially important when processing large-sized surfaces. The mechanization of operations, combined with the guaranteed filling of irregularities and cracks, makes it possible to apply a universal method for processing smooth and curved surfaces.
sprayed concrete floor waterproofing combines the advantages of a special protective composition and a universal technology for applying a moisture-proof material. Correct execution of operations is the key to successful processing of floor surfaces. Advantages of sprayed waterproofing:
- Simple application method;
- Filling irregularities, seams and cracks;
- Operational hardening of the layer;
- Formation of a seamless monolithic coating;
- No need for warm-up;
- Environmental safety of the coating;
- No toxic emissions;
- Impervious to water and steam;
- Perfect coverage uniformity;
- Resistance to intense hydrostatic loads;
- Operational durability.
Floor waterproofing with the application of the composition by cold spraying - a practical and absolutely safe technological process. The use of standard technologies is associated with difficulties that manifest themselves in the processing of uneven bases. sprayed house floor waterproofing allows you to create an elastic coating that perfectly fills any bumps and cracks. The rapid formation of a seamless moisture-proof layer is the most important advantage of spraying liquid rubber onto treated floor surfaces.
Surface preparation
Concrete floor waterproofing starts with preparing the foundation. After removing dirt and moisture, the surface is covered with a primer. For the primer, one of the components of the bitumen-polymer waterproofing is used. The application of the emulsion without a hardener ensures the penetration of the material into the smallest pores and cracks in concrete with the formation of the thinnest bitumen-polymer film. For a high-quality result, it is necessary to prime all interfaces with the walls. The main layer is sprayed after the soil has completely dried.
Floor waterproofing materials
Our company offers its customers the performance of work only with high-quality Canadian-made emulsions.
For foundation waterproofing and floors, CreteSafe B-250 is recommended. In addition to moisture protection, this material provides additional thermal insulation, which is very necessary on the first floors of buildings.
For additional insulation in the places of fastenings of building structures, seams, our company recommends using waterproof sealant TrowelGrade B-400. Our pricing policy allows us to implement acceptable options for customers with any financial situation. There is a system of discounts and bonuses.
Working with our company and construction organizations and individuals receive:
- good quality material easy to use
- flawless work performance
- consultations and assistance of qualified specialists
- convenient schemes of deliveries and payments.
Bitumen-polymer mastic, the so-called liquid rubber, is a universal material that is used as surface insulation from water penetration, vapor and sound insulation. For the device of the finishing floor, hard coatings made of cast or pressed rubber, bulk compositions are used. Resistance to the action of destructive processes occurring under the influence of temperature changes, allows the use of rubber coating indoors and outdoors. They equip sports grounds and park paths, floors in garages and industrial buildings.
Rubber floor - advantages and disadvantages
For the device of rubber coatings, various materials are made that differ in appearance and structure, but they are united by a number of useful advantages:
- durability, strength, resistance to abrasion;
- resistance to chemicals;
- waterproof, soundproof effect;
- frost resistance, anti-slip properties;
- cushioning effect, environmental safety;
- aesthetics, ease of installation, ease of cleaning.
With many advantages, monolithic rubber floor coverings have only one drawback - they are quite difficult to repair in the event of gross defects - cuts, gusts.
Overview of rubber flooring materials
Modern industry produces liquid polymer-bitumen materials that serve to perform insulation or create self-leveling floors. On sale in the construction market, there are also ready-made coatings made from molded rubber or obtained by pressing crumb rubber - a product of used car tires processing.
- Liquid rubber. Material, various modifications of which are used for waterproofing surfaces and for self-leveling floors. One-component bituminous mastics with the inclusion of polymer elements are completely ready for application on the prepared base. Subject to the technology, liquid waterproofing creates a sealed film on the surface, impervious to moisture and steam. To perform self-leveling floors, mixtures consisting of polyurethane, crumbs and dyes are usually used. As a result of pouring, a seamless decorative coating is obtained, which has excellent performance characteristics.
- modular tiles. Sector rubber elements consist of crushed tires, glue, modifiers and dyes, pressed into slabs of various sizes and thicknesses. Are used for the device of coverings of sports grounds, automobile garages, industrial premises. Modular tiles are equipped with a locking system, so they are assembled simply, like a children's designer. Defective elements, if necessary, are easily replaced with new ones. You can read more about this material.
- Roll coverings. Rubber linoleum or relin is a two-layer material consisting of rubber and natural rubber. The embossed surface gives the relin excellent anti-slip properties. Rubber linoleum is laid in industrial and public premises, in sports halls, in open areas. It is indispensable in conditions of high humidity, resistant to aggressive chemicals. Street paths made of molded rubber are not prone to icing, the relief coating prevents slipping.
Waterproofing floors of wooden buildings
Wood is a natural material, especially in need of waterproofing. With free access to moisture, wooden floor elements quickly lose their operational properties - warp and crack. Liquid rubber ideally plays the role of protection against moisture. It has excellent adhesion to most surfaces and creates a waterproof film on them. .
Liquid waterproofing is applied to the wood with special sprayers or an ordinary roller. Hard-to-reach places are processed with a brush.
A good result can be achieved when waterproofing wooden surfaces. Another name for the material is silicate glue. The composition is applied to the tree with a brush, roller or spray. This is an inexpensive and affordable way of hydrophobization. Liquid glass penetrates into the capillary system of wood and creates an impenetrable barrier for water. The potassium solution and magnesium silicate included in the silicate glue are natural antiseptics. A wooden floor protected in this way is not subject to rotting and the formation of fungus.
Do-it-yourself self-leveling rubber floor
The self-leveling rubber floor in the room is an aesthetic and environmentally friendly coating with water-repellent properties. For his device in the first place. During the construction of a new house, the concrete mortar is laid on the prepared base along the lighthouses, leveled and polished. In the operating room, pouring self-leveling floors is also possible.
A draft floor for this purpose is arranged even on a defective concrete base. The main thing is to repair it: putty cracks, fill potholes with mastic, arrange the most even surface.
Applying the mixture with a spatula
The technology of the self-leveling floor is extremely simple, it is quite accessible to beginners in construction. After careful preparation, the concrete base is treated with polyurethane adhesive. A bulk mixture is prepared from glue and rubber crumb in a ratio of 1: 7, evenly distributed over the rough floor with a layer over 1 cm thick. The composition is leveled with a spatula and rolled with a light pressure. After 12 hours, the decorative texture coating is completely ready for use.
Installation of floor coverings in garages
Garage flooring must be water-repellent, chemical-resistant, particularly durable and wear-resistant. All these parameters are fully consistent with the finished rubber coatings. For garages and car parks, materials have been specially developed that can easily withstand the weight of heavy vehicles. These are modular tiles and rubber linoleum, designed for rooms with high coating loads.
