Thanks to plastic windows, houses have become more comfortable and cozy. Winter has ceased to be a terrible enemy. Distinctive features of PVC windows are their strength, reliability and long service life. But these products also need periodic repairs.
In order for the windows to be able to protect you in the winter, keeping warm, it is necessary to make preliminary preparations. Thanks to this work, the windows will function normally. Preparing windows for winter involves a number of activities. How to switch windows to winter mode? How to prepare plastic windows for winter?
Consider in detail the following algorithm of actions:
- First you need to just wash the windows and do it carefully. It is necessary to wash both the slopes, and the window sill, and the profiles, especially if they are made of plastic material. Do not use harsh chemicals for cleaning. To clean the glass, you need a rag and a soft sponge. Windows should be washed from two sides: internal and external. When opening PVC windows, pay attention to the channels intended for drainage, they also need to be cleaned. This can be done with a toothpick or other sharp tool or object.
- Pay attention to the moving components of the window hardware. Pressure rollers - it is in this place that the greatest accumulation of dirt occurs. Dirt is the main obstacle to the normal functioning of these elements. For cleaning, use a brush that has a hard bristle - this will help get rid of dust and old grease.
- Once the cleaning of windows and hard-to-reach areas is complete, the mechanisms need to be lubricated. To do this, you will need silicone grease. Purchase a lubricant from a foreign manufacturer, as it has a long service life. If you do not want to spend your money on it, then you can use grease. According to many, ordinary vegetable oil can be used as a lubricant. But this is far from true. After a certain period of time, the vegetable oil dries up and becomes a kind of "sandpaper" that can make the mechanisms unusable for functioning. This can happen after about a year. When you lubricate the pressure rollers, be sure to turn the knob at this moment. Thanks to this, the lubricant can be evenly distributed over all parts.
- Next, check the condition of the seals. This procedure must be taken seriously, because seals affect the overall temperature in the house. If strange noisy sounds appear inside the room, and the windows sweat, then these signs indicate a damaged seal. To increase the service life of the seal, it is necessary to clean and lubricate it occasionally. Use imported silicone as a lubricant. Lubricate the entire length of the seal to prevent freezing and drying out. If you notice its wear, it is necessary to replace the product. It is possible to do this with your own hands. Before buying, be sure to pay attention to the shape of the landing site, because it may differ. The sealing item must be removed with a flat screwdriver and install a new product. To make the job easy, lubricate the landing site. As soon as the work is completed and the sealing thing is set up, it is necessary to carry out an abundant processing of the seal from its upper part.
Follow these four steps when cleaning accumulated dirt. This is the first step to prepare windows.
Winter window adjustment
As soon as winter approaches, it is necessary to adjust the window. This will help to transfer them to winter mode. The procedure is that the frame must be pressed tightly against the window to prevent drafts from penetrating. For this job you will need a hex wrench.
The sides that are horizontal are adjustable from top to bottom across the panels. To carry out such adjustment, there are sockets in the window hinges intended for a hex key.
To adjust the top panel, the window must be open. To lift the edge of the panel, which is located opposite the hinge, the tool must necessarily rotate to the right. To lower, rotate the tool in the opposite direction.
If the plastic window is low, but you can control it from the street side, then you do not need to open the sashes for adjustment. Therefore, you can make an offset of two millimeters. Or eliminate the bevel, also by two millimeters.
The hinge, which is located at the bottom, allows you to adjust the vertical sides. To gain access to the hexagon socket, the protective cap must be removed. Also, to raise the tool, twist to the right side, to lower it - in the opposite direction. The shift value is two millimeters.
When changing the pressing force along the vertical and horizontal parts, do not forget that the eccentrics responsible for this are located throughout the edging. While turning the handle, each eccentric goes beyond its place of pressure.
To increase the pressing force of the frame, the eccentric must turn to the right. To reduce the force, he must turn in the other direction. Each eccentric has specially designed marks. Thanks to them, you can determine the pressing force of the frame. Therefore, if the mark is located where the seal is, then this means that the clamp is strong. If the mark is turned where the street is, then the clamp is weak.
Some windows have eccentrics that can be rotated using ordinary pliers.
In places where the loops are located, there are devices that regulate the clamping force. The degree of strength is determined by the protrusion of the tongue. From the length of the tongue, the density of pressing the frame to the window is determined. Changing the length of the tongue is carried out using a hex key.
To make the length of the tongue longer, the tool must be turned to the left side if the loops are located on the left side. If the hinges are located on the right, then it must be twisted to the right. During the winter period, it is necessary to press the frame as tightly as possible. In the summer, the pressure should be weak.
The main thing is not to overdo it. Do not press the frame too hard, otherwise the wear of the sealing material will accelerate.
Also in preparation for the winter season, the hinges also need to be adjusted, that is, press them hard. From the hinge, which is located below, it is necessary to remove the specially designed cap and scroll the bolt, which is located perpendicularly.
It is possible to adjust the pressing force of the hinge, which is located on top, if there is a flap. Its installation is carried out for ventilation, thus you can use the key. During this work, hold the window, because it is fixed with a single loop.
Insulation procedure for plastic windows
If after a certain period after the installation of PVC windows began to let in drafts and do not retain heat, then it is necessary to insulate them. But first you need to find out the causes of these problems. Consider the main reasons:
- The rubber seal has worn out. Need to make a replacement.
- There was a depressurization of the area where the junction of the frame and the slope is located. To eliminate this shortcoming, the slopes should be removed, insulated and re-installed. We close the windows.
- Perhaps after you installed plastic windows, the walls could shrink. To eliminate this problem, it is necessary to carry out additional adjustment of the fittings.
In winter days, the thermal insulation of plastic windows can be carried out thanks to the film. This method is the most expensive, but at the same time the most effective. The gluing of the film takes place from the street side. In rare cases, thermal insulation is carried out from the inside. The film must be stretched over the entire surface of the frame and must be attached at the edges.
During this process, it is necessary to simultaneously control the tension of the material, the force and uniformity. If the material is not stretched well in some place, a strong wind can form a breakthrough. If it turned out, then the hole must be sealed with adhesive tape so as not to spend money on acquiring a new product.
When choosing a film material, attention should be paid to frost-resistant characteristics. The required material has a yellowish tint. High-quality film is hard to find on the construction market, so buy it at a large building market. In order not to spoil the appearance of the room, buy material that is intended for greenhouses. This product has a higher cost, but it will last a long period of time due to its high level of stability.
The installation of this film consists in attaching it to the edges of the frame using adhesive tape. Windows must be closed.
Instead of adhesive tape, you can use a construction stapler, but defects will appear on the frame. The main processes of thermal insulation and sound insulation are provided by double-glazed windows.
There is a PVC insulation that can replace the film. This insulation is an environmentally friendly material. Manufacturers guarantee high-quality thermal insulation. PVC insulation withstands low temperatures and is not subject to deformation. You need to decide for yourself which material to choose.
When you switch windows to winter mode, pay attention to these tips. Preparing plastic windows for the winter with your own hands is a guarantee of maximum comfort and coziness in the room. All premises will be switched to winter mode. Work carefully and carefully.
Do not save on thermal insulation materials. Remember to clean the surface before starting the procedure. You will be able to switch the windows to winter mode. Prepared plastic windows for the winter will not let the cold into the room.
Windows do not allow extraneous noise from the street to penetrate into the apartment, provide the desired air temperature in the room. Plastic structures after installation require periodic maintenance. First of all, you need to figure out how to switch windows to winter mode, why it is necessary, when to carry out such procedures. In addition, it is important to study the principle of operation of locking mechanisms, which have a number of functional features.
Don't forget about this wonderful mode in winter!
Window Modes
In the absence of theoretical knowledge and practice, it is advisable to contact specialists. They can give professional advice on the accumulated issues and offer the best options for solving problems.
There are three modes on plastic windows, with the help of which the pressing force of the sashes is regulated. Among them:
- Summer - the sash is pressed weakly. This position promotes air circulation in the room. Sealing rubber is minimally subject to wear.
- Winter - provides a fairly tight clamp. There is no movement of air masses, because of this, heat is retained in the room. In this case, the maximum load on the seal is carried out.
- Standard - middle position. Often, installers leave structures in this form. The difference is that true professionals explain to the owners how to switch windows to winter mode (or summer), and unscrupulous ones do not consider it necessary to tell this. This position is intended for the off-season.
In this video you will learn how to adjust plastic windows
Switch pros and cons
It is enough not to put plastic windows in winter mode for 2-3 years, so that even after adjustment, it starts to blow from the window sill or balcony door. There are a number of problems that can arise if the euro window is not adjusted correctly. The main one is a violation of the microclimate in the room.
Excessive humidity causes condensation on the walls, frames and double-glazed windows. All this leads to the formation of mold. Summer mode in winter leads to significant heat losses, it becomes necessary to heat the room additionally, which is fraught with an increase in the cost of paying for electricity or gas.
If you use the winter position in the summer, this will lead to rapid wear of the rubber seals. As a result, any subsequent adjustments will be useless. The way out is to replace the seals, which are expensive.
Do not use winter variations of using windows in summer Disadvantages of window adjustment may appear with incorrect manipulations that the owner performs on his own. If the procedure is carried out correctly, the change of modes will benefit. First of all, you need to figure out in what situations the switch will be justified.
Timely change of position increases the life of the windows, even if such manipulations have not been carried out for a long time. From drafts in the winter or dust ingress in the summer due to the deterioration of the sealant, you can get rid of it if you rearrange the structures “for the winter”. This will delay the repair for one to two years. Sagging loops can be eliminated in the same way. The last resort is to replace the hardware.
Types of eccentrics
Not all plastic windows can change the modes. To figure out if there is such a system on specific double-glazed windows, you need to pay attention to the locking mechanism. The eccentric located in the middle may be oval. In addition, there are parts that have a hexagon hole in the center. This indicates the presence of a winter regime in window structures.
The algorithm for adjusting plastic structures with different types of fittings is identical, only their position differs. Before starting work, it is necessary to study all types of trunnions:
- Oval parts after installation are often located diagonally - this is the standard position, the middle between winter and summer mode. Horizontal arrangement means "winter", vertical - "summer".
- On a round pin for a hexagon, you can determine the position as follows: if the part is extended in relation to the street, this is the winter mode; placed in the center - standard; recessed towards the room - summer.
- The third option is a round hex eccentric, but when rotated, it does not move. This type of fitting is equipped with a label indicating the position of the windows. The value is similar to the previous option: if the label is located towards the street - "winter", towards the room - "summer", in the middle - "standard".
There are several types of tools for regulating the winter regime. Preparatory work
Before setting up the fittings of plastic windows for winter mode, it is necessary to perform a number of additional manipulations. First, use a rag to remove grease from the locking mechanisms. This is necessary so that dirt and dust do not get inside during the adjustment process. After the procedure, you need to restore the lubrication layer.
Then you need to find all the eccentrics, the number of which depends on the size of the window. If there is a mosquito net, you need to dismantle it, rinse it and put it aside until the arrival of heat.
Before the onset of cold weather, the seal should be treated with silicone or glycerin grease. Experts recommend giving preference to silicone-based sprays, which can be purchased at automotive or household outlets.
Many craftsmen believe that switching fittings from "summer" to "winter" should be when drafts are felt. But this option is optimal for those areas of the country where a warm climate prevails. The most suitable time is the beginning of the heating season. In addition, misted glass or frozen ice on the inside of PVC windows indicates the need for adjustment.
Before changing the mode in plastic structures, you need to carefully examine the rubber parts. There are situations when the fittings are adjusted correctly, but the seal has become unusable (torn or cracked). In such a situation, it is imperative to replace it. For one season you can buy cheap products, but they will not last more than a year.
After a detailed study of the fittings and how to translate it, you can proceed to the adjustment itself. For example, over time, the window frame may warp, causing one side to fit more tightly than the other. This situation is unacceptable, because an additional load is created on all components and drafts appear, so it is important to set it up correctly.
You need to start adjusting the sash horizontally or vertically from the bottom hinge. To do this remove the protective plastic cover and find a screw with a special hole for the hex, which is located on top.
Turning it clockwise will raise the frame, turning it counterclockwise will lower it. To move the sash to the frame or, conversely, place it further, turn the screw located at the bottom of the hinge.
Step-by-step instruction
Having understood the theory, you can proceed to the practical setting of window structures. A step-by-step guide on how to winterize plastic windows:
- After opening the sash, find all the trunnions, there are three of them on standard windows. If the marker is closer to the street, it must be moved in the opposite direction so that it is located towards the premises.
- To work, you will need a hexagon of a suitable size, often a 4 or 6 mm tool is used. It is desirable that during the manipulation there is a set of different keys at hand, because thin products will be needed for vertical and horizontal adjustment.
- Having picked up the tool, proceed to turn the trunnion. Perform similar manipulations for the rest of the eccentrics. Then check the tightness of the abutment of the sash to the frame.
Regardless of the frame design, tuning is not as difficult as it might seem at first glance. It is important to follow certain rules and follow step-by-step instructions. If the windows were installed not so long ago and are still under warranty, it is better to call a specialist from the company that did the installation. Such a procedure is free, but one cannot hope that everything will be done perfectly, one should not exclude the possibility of self-finishing the structures. After setting up at least one sash, subsequent maintenance can be done by hand.
Some types of fittings built into the frame allow you to set the modes for summer and winter. They are called pin or eccentric. The demand for plastic windows with adjustable devices is increasing every year.
Adjustment modes
The ability to adjust the flow of air into the room by changing the position of the trunnion. The adjustment is made in accordance with the marked marks. Each has an inscription with the following information.:
- Average(standard) - creates natural ventilation when the window is closed.
- summer- the smallest seal between the sash and the frame.
- Winter mode– tight pressing to the frame.
How to define functionality?
When choosing a design, inspect the end side of the sash, from the side of the lock handle. It should have built-in fittings in the form of a convex hexagon, roundness or oval. This is a trunnion or an eccentric. It is used to transfer from one mode to another.
Note:When buying a product, pay attention to the presence of an auxiliary tool for adjustment, this is a wrench with a tip that matches the shape of the eccentric. It must be included.
Window Specifications
At high temperatures, the elastic seal begins to expand. If you do not change the winter mode, the material will fail. Seasonal adjustment reduces wear on fasteners and window lock.
The trunnion is installed in the edge of the sash. Device requirements are high. The metal is subjected to mechanical stress during adjustment, and should not change the dimensions specified by the manufacturer during the entire period of operation. Products, Made from high-strength stainless steel, make them durable and hardy, they are more expensive, but retain technical characteristics for a long time. Therefore, PVC manufacturers install them.
The tightness of the rubber layer depends on the quality of the fittings. Correct setting prevents friction between the profile.
Middle class trunnions are cheaper. For their manufacture, high-quality steel is not used, which leads to rapid wear of the metal.
Advantage of eccentrics
Modern plastic windows retain heat and prevent drafts. The room is ventilated regardless of the season. With high-quality fittings, the life of the window is extended without repair.
Types and forms
The modification depends on the manufacturer and the specification for manufacturing. The appearance of the eccentric is influenced by the requirements of the customer, producing designs with a rotation mechanism.
All installed fittings differ in the following type:
- Budget.
- Standard.
- The highest category. This product is distinguished by its functionality, quality and service life.
The trunnion is made in different models, and has the following shape:
- Oval.
- rounded.
- Hexagon.
It is installed in the side plane, from the side of the castle. advanced manufacturing technology and high quality steel b, allows you to produce products of the highest class. They are more expensive, but the cost of them will be justified.
Switching the device to another mode
Air entering through the side faces creates discomfort. Move the trunnions to the position corresponding to the season, namely:
- "Winter". The seal, moving forward, pressing the sash to the frame. In this position, it wears out with greater intensity.
- "Summer". The seal, returning to its original position, creates a gap for the passage of air.
How to properly adjust the window?
Reasons why it is advised to make adjustments:
- The window sash sags.
- Poor opening or closing.
- Dust enters the room.
- Blows cold air into the cracks of the openings.
- The handle of the lock turns with great effort of the hand.
- The house gave way.
Translation of fittings
Adjustment method:
- The hexagon is turned with a special key included in the product kit, putting it on the device from above.
- Oval - by turning the pliers.
- Rounded - with a sacral screwdriver, setting it in the center.
The number of eccentrics depends on the height of the window. The standard provides for the placement of five pieces on one vertical line. Two of them are installed close to horizontal planes, the remaining three are evenly distributed over the entire height.
If the glass fogs up from inside the room, it is advised to leave a gap for natural condensate by setting the arrow to the “medium” mode.
Step-by-step instruction
- Open sashes, clean the fittings with a brush with hard bristles, and wipe with a wet cloth.
- Remove old grease from seals, and apply fresh silicone compound in a thin layer.
- On cleaned surfaces it will be possible to discern the “winter”, “medium” and “summer” risks.
- Check the setting. To change the position, the plastic roller of the sash is pulled towards itself.
- Changes rotate to the specified mark using the helper tool. To transfer to the "winter" position, the end of the long radius is directed to the inscription. The cut should line up with the tip of the arrow.
- When set to "summer", or "medium", change the position of the short radius. The arrow is turned to the mark.
- Pin, scrolling clockwise, minimizes the distance between the sash and the frame by changing the position of the seal.
- After completing the adjustment process, it is buried in the holes, giving the initial position. In the working condition of the double-glazed window, metal elements should not come into contact with the plastic of the structure.
- Check density with writing paper. Insert it into the opening between the frame, and pull it out. If it doesn’t work, then everything is done correctly.
Note:
On a round trunnion, a dash directed towards the street means that the frame is set for winter. For the oval, there is another type of mark. It must be horizontal.
On a rounded device, a dash directed towards the room means that the frame is set for summer. For an oval trunnion, the mark takes a vertical position.
Friction squeak adjustment
Similar deviations occur in a new house, when the foundation or its walls shrink. If you find friction or blowing, make adjustments.
Vertically
Adjustment is done on the bottom loop. AT adjustment screw on the top. It is removed from the profile by mechanical tension on itself, and the following turns are made:
- Clockwise, lifting the sash.
- Against her, dropping down.
Horizontally
The adjustment is made on the lower loop, at the location of the adjusting screw. When you turn the arrow, shift the plane to the left or right.
Adjustment will create a free play between the sash and the frame, ensuring a uniform density of the horizontal and vertical plane. This will favorably affect the climate of the room, and relieve drafts.
What to look out for
- The translation of the mechanism is carried out strictly according to the instructions. Failure to comply with the rules of adjustment leads to a mechanical defect of individual elements and the entire set as a whole.
- Constant contact of metal parts has wear. To maintain the operating parameters set by the manufacturer, the fittings are lubricated and adjusted.
- Leaving the frame in the "winter" mode for the whole year is undesirable. This leads to tire wear.
- If the "summer" mode does not create drafts, and the room has good heating, it is not advised to change it. This will have a positive effect on maintaining the performance of mechanisms for a long service life.
Having completed the transition to winter mode, circle the contour of the window sash on the frame with chalk. Open it up and measure the distance between the edge and the mark. Standard parameters are from 6 to 8 millimeters. If they are different, make additional adjustments. The indicator along the entire length must match. A different value can cause:
- The passage of cold air into the room through the seal.
- In places of excessive contact, friction and squeezing of the material will be created.
- It will be difficult to turn the handle of the lock. This will lead to wear of the core, and mechanical damage to the insulation.
- When purchasing a new PVC window with adjustment for such modes as summer and winter, do not change the position of the seal on it in the first year. Rubber is resistant in density, increasing the load on it will damage all metal fasteners and the lock.
Conclusion
The product, made to order, will fit tightly into the prepared window opening, and there will be no horizontal and vertical load after the installation work is completed. Entrust the execution of work from start to finish to one contractor, and get a guarantee for the operation of the structure. Order products with high-quality fittings, they are regulated without involving the master.
We will send the material to you by e-mail
The air temperature in the room largely depends on the tightness of the window system. Timely regulation allows you to create the most comfortable conditions in each room. As part of today's review, we will look at how to switch windows to winter mode so that you can do it yourself.
Windows can be operated in various positions
The mode of modern plastic windows determines the degree of pressing the sash to the frame. May be:
- standard, at which the sash has an average clamping position, optimal for. The window system is able to work effectively in winter and summer. The eccentric occupies a central position;
- winter. Provides the tightest fit of the sash to the frame. The winter position of plastic windows allows you to more effectively retain heat inside the house;
- summer. The sash is fixed less tightly. Air can circulate freely, providing a micro-ventilation effect. As a result, comfortable conditions are created in the apartment during the hot season.
Why do you need to adjust the modes of plastic windows
By alternating the summer and winter modes of plastic windows, you can extend the life of the structure. In winter, the material contracts, and as the air warms up, it expands. Adjusting the window system changes the degree of pressing the sash. As a result, the wear intensity of the seal and fasteners is reduced.
You should change the plastic window mode if:
- blowing from the window. An incorrectly chosen position will lead to the fact that in winter cold air will flow from the side of the window system;
- the sash does not open or close properly. An incorrectly chosen position may contribute to its jamming in the ventilation mode;
- the sash sagged. The reason may be the critical wear of the hinges. By replacing the fittings or by transferring the design to winter mode, you can.
Advice! Learn from the master how to transfer double-glazed windows to winter mode immediately after installing the system.
Advantages and disadvantages of switching windows to winter mode
Timely change of the mode of the window structure has a beneficial effect on the microclimate inside the house. Being in the winter position, the system will prevent the penetration of cold from the outside. Summer position will provide active air circulation.
It should be remembered that the constant change in the order of the window system has certain disadvantages. Adjusting screws allow you to increase the degree of sealing of the window system. However, a constant change in the position of the fastener can cause the loss of the basic characteristics of the sealing element. Strong compression, exposure to low temperatures and high humidity can lead to the fact that after 2-3 seasons the sealant will become worse for its main purpose. In some cases, it may even need to be replaced.
Attention! Refusing to change the order of the window system, you can increase the life of the seal at least twice.
Which fittings have the function of switching to summer or winter mode
Before you figure out how to put plastic windows in winter mode, you should find out if all designs have this function. Answer: no. It all depends on what class the fittings used belong to. Allocate accessories:
- budget. Such accessories have limited functionality, as they are designed for cheap plastic products. With its help, the sash can be opened / closed. Some models allow you to choose ventilation. Budget fittings are most often resorted to during large-scale construction, when it is necessary to reduce the cost of building a typical new building;
- standard. The price matches the quality. Products have a wider functionality compared to the budget option. Most models allow you to set the winter mode on plastic windows. Standard fittings are widely used in most window systems installed in buildings for various purposes;
- specialized. Such products are designed for windows that are mounted in rooms operated in special conditions. They have special abilities. They can be anti-burglary. With their help, you can change the operating conditions of the window system.
Advice! Timely care of double-glazed windows will greatly simplify the process of switching from one mode of operation to another.
Preparatory work is carried out in the following sequence:
- glasses are washed;
- the frame is cleaned of accumulated dirt. Particular attention is removed to the joints and connections;
- accessories are cleaned. To do this, use a hard brush;
- all elements of the window system are thoroughly wiped;
- fittings are lubricated with silicone grease;
- the pin is given the required spatial position;
- grease is reapplied.
When and how to switch windows to winter or summer mode
When to switch windows from one mode to another, everyone decides individually. If it “pulls cold” from under the closed sash, it’s worth it. You should not rush, so as not to worsen the condition of the rubber seal ahead of time. It is also important not to overdo it, as a strong tightening of the eccentric sometimes leads to. As soon as it gets warmer outside, you should immediately switch from “winter” to “summer”. On how to transfer eurowindows to winter mode, we will consider below in more detail.
How to properly adjust windows
Before setting the mode, the window system should be adjusted to avoid damage to the sealing element when the sash sags or is skewed. Armed with a pencil with a soft core, you should circle the closed sash around the perimeter. This should be done carefully, without much effort.
Having opened the sash, you should measure the distance between the frame opening and the drawn line. The values obtained should be in the range of 6 - 8 mm. Ideally - equal around the perimeter.
If the values do not match in height, remove the decorative plastic insert from the hinges and tighten the screws using a hexagon. If the distance from below is smaller, then unscrew the upper screw a little, adjust the position of the sash and screw the fasteners back. This action is repeated with the second loop. If the distance is smaller from above, similar actions are performed with the lower screw. Adjustment is carried out until the desired result is achieved. As a result, all screws should take approximately the same position.
Attention! A properly adjusted structure should open without a characteristic rubbing sound.
If horizontal displacement of the sash is required, the adjusting screw is tightened in one of the hinges. The displacement can be up to 3 mm. If you want to move away from the hinge, turn counterclockwise. Otherwise, clockwise.
Related article:
Photo and video instructions
A sufficiently detailed verbal description does not always allow you to figure out how to switch windows to winter mode. Pictures with a detailed description or a master class recorded on video allows you to understand this much faster and better. We offer you to choose the most convenient way of perceiving information, so that it is easier to adjust the window structure at home.
How to transfer plastic windows to winter mode?
For those who do not know how to switch windows to winter mode, an instruction with a detailed description will help you complete the necessary steps accurately enough. You should prepare the necessary tools and follow the recommendations of a specialist.
To begin with, let's take a closer look at how to switch windows to winter mode with a hexagon. You can follow the following instructions:
| A photo | Description of works |
|---|---|
 | We open the sash. |
 | We are preparing a 4 mm square key. |
 | Adjust the position of the first eccentric. |
 | Adjust the position of the second eccentric. If there are more, their position should also be adjusted. |
 | The required position is determined by the notch. In winter mode, it should be located closer to the rubber seal. In the photo, the winter mode on plastic windows. |
 | Turning the eccentric at an angle of 180 degrees will allow you to switch windows to "summer". |
 | We check whether all the eccentrics are translated into the desired position. Their number can be determined by reciprocal levels. |
And the transfer of plastic windows to winter mode will reduce heat loss from the house. You can perform this operation yourself. Switching windows to winter mode does not require a large number of tools and special skills. Our article describes in detail the sequence of actions that is understandable even for people who do not have technical skills.
What is winter mode in windows?
Modern plastic windows have several functions that allow you to control and regulate the microclimate in the living room. Manufacturers and sellers do not always inform buyers about the availability of these opportunities for plastic windows. An independent study of their characteristics and a careful examination of the frames will reveal the presence of an eccentric, which is a regulator of the fit of the window sashes to the frame.
Most apartments are equipped with plastic windows. Indeed, they are easy to use, durable, have different sizes and can be of varying degrees of insulation. However, for the correct choice of such a window, you will need to correctly measure. will help you make the right measurements yourself.
Plastic window modes
There are three modes that differ in the position of the valves and are characterized by maintaining different temperatures:
- summer - this mode is recommended to be installed on the frames in the spring and before the onset of autumn. The loose fit of the sashes to the frame allows for sufficient air flow into the rooms;
- winter, which is set with the onset of cold weather. A snug fit to the frame makes it possible to minimize heat loss from the room;
- the standard position is characterized by the middle position of the eccentric, which regulates the degree of fit of the sashes to the frame. It can be left for the whole year due to the most optimal intake of air into the room.
Due to the deformation of parts of the product under the influence of temperature and humidity, the fit correction will reduce the degree of wear of window parts.
When to set winter mode
The onset of cold weather can be considered the reason for changing the regime in a plastic window.
However, the following situations should also be attributed to the reasons why it is recommended to switch windows to winter mode:
- blows from the window. In summer, such blowing entails excessive dust entering the apartment, and in winter - a decrease in the overall temperature in the apartment;
- sagging sash. This defect can be eliminated by replacing the fittings or tightening the hinges. A tighter fit of the sash to the window frame will also help, that is, the winter mode;
- poor closing or opening of the window. This may be the result of an incorrectly set window mode.
The listed reasons should be considered a sufficient reason to switch the window to winter mode. The process for setting this mode is described in the next chapter. Correctly performing the above actions will allow you to maintain the normal functioning of the windows for a long time, provide warmth and comfort in the house.
Switching windows to winter mode
Often, the owners of plastic windows call an employee of the company in which these windows were bought to transfer them to a certain mode. However, if you correctly carry out the necessary actions, you can independently set the required window mode.
Sequencing
Before translation, the location of the trunnions should be determined. The number of eccentrics depends on the size of the sashes and windows. You should find everything, because when you switch to a certain mode, you need to adjust each of them.
Usually there are three of them on the side where the handle is located, and one on the opposite side, where there are hinges and canopies.
- Before exposure, thoroughly clean all fittings. This will protect it from mechanical damage, ensure flawless functioning in the future;
- apply lubricant, wipe again. This action will allow you to translate more accurately. Prevention of a probable breakdown of the window mechanism guarantees the expected result: blowing, dust entering the room;
- after switching to the desired mode, you can re-lubricate the mechanism;
- take a closer look at the eccentrics. You should find all the marks that mark the modes. This is usually a strip and the position of the trunnion relative to the horizon;
- now you should directly transfer to the desired mode. For this, a hexagon or pliers can be used. The oval-shaped eccentric is more convenient to move with pliers.
After completing the manipulations, you can check the degree of air penetration into the room as follows. Place a thin piece of paper between the sashes of a closed window. If it vibrates or flies out of it, then the window is in summer mode.
It must be remembered that some manufacturers of plastic windows have eccentrics recessed into the sash. Before carrying out manipulations to transfer the mode, it must first be pulled out.
After the end of the transfer to the desired mode, set it to the original mode. It is most convenient to perform this action with pliers.
Winter mode is usually marked with a flat dash, which is turned inside the room. If the trunnion is oval, then the dash or dot should be horizontal. This is a general requirement for all types of plastic windows that have the function of switching to different modes.
