Modern air curtains have a centrifugal fan with a metal impeller, which prevents its destruction from large temperature fluctuations and allows its blades to be perfectly balanced. An air filter is also provided to protect the RTS - heater from contamination, overheating protection, 4 safety temperature sensors, a one-minute turn-off delay for cooling the heating elements. The infrared remote control allows you to remotely control the operation of the air curtain. Dantex air curtains are produced with a capacity of 3.6, 8 and 10 kW, installed in a horizontal position and create an air velocity at the exit from the grille of 7.5-9.5 m/s with a temperature of no more than 25 °C. Protection class - IP24.
Dantex air (thermal) curtains are produced in two series: K1 series and D1 series. Both series are designed to create an air threshold between two air environments, in order to exclude the penetration of cold air from the outside in winter, and hot air - in summer into the room. Most often, these are entrance doors to large supermarkets, shopping and entertainment centers, markets, etc.Modern air curtains have a centrifugal fan with a metal impeller, which prevents its destruction from large temperature fluctuations and allows its blades to be perfectly balanced. An air filter is also provided to protect the RTS - heater from contamination, overheating protection, 4 safety temperature sensors, a one-minute turn-off delay for cooling the heating elements. The infrared remote control allows you to remotely control the operation of the air curtain. Dantex air curtains are produced with a capacity of 3.6, 8 and 10 kW, installed in a horizontal position and create an air velocity at the exit from the grille of 7.5-9.5 m/s with a temperature of no more than 25 °C. Protection class - IP24.
The Dantex trademark is well known in the market of climatic equipment due to a wide range of products, a balanced combination of price and quality, reliability and ease of operation. Thermal curtains Dantex fully comply with all the listed characteristics and are reliable and practical heating equipment, which you can buy at a reasonable price, choosing from a variety of presented models of various capacities. Thermal curtains Dantex made in a classic strict design, have an ergonomic shape and compact dimensions. They are easily mounted in openings of various widths and heights and can be used in rooms with a wide variety of purposes, including objects with heavy human flows.
Thermal curtains Dantex have several model ranges, which differ mainly in heat output and minor design features. The following series of air electric devices of the specified type are on sale:
DDN (DDN-3) - a series of compact devices with an air flow rate of 600 to 1500 cubic meters per hour. They are equipped with a fast heating posistor element (RTS-element) with built-in overheating protection, which provides automatic adjustment and uniform heat distribution. The motor is equipped with French Schneider Electric magnetic starters. Due to the good balancing of the fan blades and soft rubber on the bearing casing, the minimum noise level of the operating curtain is ensured; Air curtains of this series are also equipped with PTC heating elements with built-in overheating protection. To cool the heating elements, the fan motor continues to run for 1 minute after the device is turned off. The high reliability of the equipment is ensured by several elements: metal fan blades, heat-resistant cable and wire insulation, a motor with improved cooling function due to heat sinks in the case, and the use of reliable magnetic starters from the French company Schneider Electric.
Our online store presents a wide range of heating devices of the specified company of various capacities, which can be bought at the lowest prices on the market.
