So, I collected a sufficient amount of material and decided to write another analytical note. This time the topic is sawing laminated chipboard without chipping.
There is a fairly fair opinion that it is possible to cut laminated chipboard cleanly only on professional equipment(that is, a format-cutting machine).
The whole highlight of this machine is that it has two saw blades, located strictly on the same axis. The first one cuts the chipboard, the second one cuts it right through.
The cost of this unit is about 700,000 - 1,000,000 rubles (of course, there are more expensive ones))). NOT VERY ACCEPTABLE FOR AN Amateur.
This is a good way to trim incorrectly marked parts, but you can’t cut the entire cabinet this way. Chips, of course, are present, but in an amount quite comparable to the formatter (it also, secretly, leaves a small number of small chips). A lot of hassle with markings. Only straight cuts can be made.
Method 5 - Fraser
Provides the cleanest possible edge to the workpiece, the quality is no different from the formatter, often even better.
With it, we first saw the workpiece with a jigsaw, retreating 2-3 mm from the marking line, and then align the line according to the template (I usually use a second piece of laminated chipboard, sawed on a format saw, suitable size). must be copying, that is, with a bearing.
Very clean cut. The possibility of making curved cuts, that is, making many, including several completely identical ones. Cons - a lot of hassle: necessity precise marking, preliminary filing of workpieces, setting a template or tire for a router, that is, it is not very suitable for mass use.
An important procedure is cutting laminated chipboard, during which work is carried out with two materials - chipboard and laminated coating. You should choose tools that are suitable for them and will not leave any chips or cracks. The procedure is quite labor-intensive, being much simpler with other materials - chipboard, MDF and others. That is why it is undesirable to perform it at home - unexpected costs for the purchase of new materials may follow.
Prices for cutting laminated chipboard
Straight cutting of parts | |
---|---|
chipboard; MDF; laminated chipboard; LMDF up to 16 mm |
35 rub./p.m. |
chipboard; MDF; laminated chipboard; LMDF from 18 mm |
40 rub./p.m. |
PLYWOOD up to 17 mm |
50 rub./p.m. |
PLYWOOD over 17 mm |
60 rub./p.m. |
Fibreboard, HDF 2.75x1.22 |
130 rub./sheet |
Fibreboard, HDF over 2.75x1.22 |
200 rub./sheet |
Manufacturing of complex parts | |
70 RUR/pcs. | |
Bevels at an angle to the side or not perpendicular planes sheet | 70 RUR/pcs. |
Straight cuts with exits on different sides |
200 rub. |
Straight cuts with exit on one side |
300 rub. |
Curved parts (radius) | |
Edge trimming of straight parts (without edge cost) | |
Edging curved parts (without edge cost) | |
Groove selection | |
40/80r. | |
Drilling holes (additive) | |
Diameter from 10 mm to 16 mm (eccentric hole) |
30 RUR/pcs. |
Package | |
30 RUR/m2 | |
Other services | |
Tabletops | |
Complex cutting - the cost is calculated in accordance with the specifications and template | |
We offer to your attention an application form for cutting (37.00kb)
Cutting laminated chipboard according to customer sizes wholesale and retail
Work at home consists of two stages: first the laminate is cut, and then all the material. Due to the availability of special equipment, they are performed in one stage, which significantly saves time and effort.
You can order our services on the website or by phone. We will cut laminated chipboard quickly, providing you with carefully processed materials that will be used in the production of durable and beautiful-looking furniture.
If necessary, we will quickly answer all your questions regarding the services and all aspects of their provision. Contact information is presented to your attention on the website.
Advantages of cutting laminated chipboard at KSPROF
There are many specialized companies in Moscow that provide services for processing materials used in furniture production. One of these is the KSPROF company, where you can order cutting of laminated chipboards. In this case, we have significant advantages, including:
- significant experience;
- adequate pricing policy;
- performing work with high quality result;
- experienced, responsible and careful specialists;
- prompt execution of processes;
- taking into account all features and aspects of services;
- convenient ways payment.
Examples of work
HOW TO ORDER LDSP
Do you need to cut laminated chipboard? We will do it efficiently and quickly!
Our company provides the following services:
- cutting, dissolving, cutting
- chipboard milling;
- drilling parts;
- production of grooves and bevels.
Equipment for cutting laminated chipboards
The equipment used by the HOMAG GROUP company is high-precision, high-performance and has modern software control.
Advantages of this equipment: high performance, the manufactured parts are not chipped, their dimensions and angles are made with exact dimensions (minimum cutting error).
Additional functions of the equipment: gluing quick-release labels on each part.
Dimensions of initial sheets and final parts of laminated chipboard
- thickness of the original sheets: 0.5-100 mm.
- cutting error: ±0.5-2 mm(depending on equipment).
- maximum size of manufactured part: 2770x2040 mm.
- Minimum size of manufactured part: 50x50 mm.
Minimum radii for edging:
- laminated chipboard16 mm:
- external not less than 50 mm;
- internal no less 80-100 mm.
- laminated chipboard25 mm:
- external no less 100 mm;
- internal no less 80-150 mm.
Price for cutting laminated chipboard
Minimum cost cutting services - 3000 rubles + cost of material.
Chipboard thickness, mm | Price, rub/pm* |
8-18 | 35 |
22-25 | 42 |
32-50 | 85 |
*prices are indicative for a volume of more than 1200 rm, prices for cutting depending on the complexity of the order can be changed
Order cost (calculation of chipboard production according to customer dimensions)
Pay attention! We cut laminated chipboards only from the Egger, Kronostar and Kronospan brands.
To receive an offer from us regarding the possibility and cost of an order, follow these steps:
![](https://i0.wp.com/stroyprovider.ru/img/raspil_blank.png)
Order execution time
Pay attention! We calculate cuts only in weekdays! The period for calculating the cost of an order is from 1 to 3 working days.
The production time for laminated chipboard parts is 3-8 working days from the moment the client makes payment.
Due to the seasonal workload of production, the lead time may be extended. Please check with your manager for current order execution times.
Expedited order execution is possible. In this case, the surcharge on the cost of the order for urgency is 10-30% ( but not less than 3000 rubles)
Where is custom-made chipboard made?
The production of orders is carried out in our workshops on the territory of warehouses located.
We cut laminated chipboards into parts according to customer dimensions. In stock large selection decors of laminated chipboard EGGER and Kronospan.
Attention!
The Egger company announced the launch of a large part of laminated chipboard decors in 2020! Order any decors now, don’t put it off until tomorrow!
Price of Egger chipboard parts with cut to size
laminated chipboard Egger 8 mm | from 740 rub. / sq. m |
laminated chipboard Egger 10 mm | from 740 rub. / sq. m |
laminated chipboard Egger 16 mm | from 740 rub. / sq. m |
laminated chipboard Egger 25 mm | from 1050 rub. / sq. m |
Colors and prices of EGGER chipboards |
Price of Kronospan laminated chipboard parts with cut to size
Radius cut
Nesting is not only radius cutting of curved parts into milling machine CNC, but also the production of parts from laminated chipboard and MDF with holes for assembly at a time, i.e. without moving from machine to machine.
The main advantages of manufacturing curved parts and parts with additives using NESTING technology:
- Possibility of saving laminated chipboard sheets due to a denser arrangement of curved parts on the laminated chipboard sheet
- High productivity – cutting speed up to 20 meters per minute.
- Fundamentally more high precision manufacturing compared to traditional technologies.
- Possibility of producing internal cutouts with high quality.
- Finish cutting both on the front and on back side details, which improves the quality of edge application.
- Ability to work with vector files created in the programs Basis Furniture Maker, Corel Draw and their analogues.
The above advantages allow you to save on both material and the cost of work on curved cutting and additives, which is fully noticeable on large orders.
The cost of cutting services on a CNC milling machine for laminated chipboard and MDF with a thickness of 8-19 mm is 30 rubles per 1 m.p.
Radial cutting of chipboard parts
Chipboard edge processing
Applying 0.45 mm PVC edges to laminated chipboard parts
Applying 2 mm PVC edges to laminated chipboard parts
Hardboard (fibreboard)
Sawing hardboard and holes for fiberboard
MDF
Cutting MDF Kronostar to size
Furniture additive
Drilling holes in chipboard for fittings
Hole for furniture hinges, Ø35 mm | 55 rub. / piece |
Hole for shelf holders, Ø5 mm | 25 rub. / piece |
Through hole for confirmat, Ø8 mm | 25 rub. / piece |
End hole for confirmation, Ø5 mm | 25 rub. / piece |
![]() You can receive details faster by registering and paying urgent cutting. The DSP Komplekt company reserves the right to refuse to provide services without giving reasons. Payment for servicesYou can pay for cutting services:
|