Office partitions - functions, types and selection rules. Types of partitions for offices Design of different types of office partitions

Office owners understood one simple truth: in order to increase the efficiency of employees, it is necessary to create the most comfortable conditions. How to make the space functional so that everyone has the feeling of a personal workplace? To work comfortably, and most importantly, pleasant? Not all office owners have the opportunity to equip an office for each employee. It is for such cases that special structures have been created - office partitions. With their help, you can delimit and divide the workspace into zones. No major changes or special permissions needed. Such partitions are made of various materials, various colors and colors, they are also transparent or completely darkened.

Advantages:

• simple assembly;
• trouble-free disassembly when moving;
• easy transformation if necessary.

The main types of office partitions

There are several types of such structures:

• transformable;
• stationary;
• mobile.

Transformable structures are suitable for conference rooms and in particular for the operational division of space. Their main advantage is that with their help the office space can be used for different purposes. They look like sections. Suspended from the ceiling, the partitions are easily moved apart or aligned.

Stationary modules are the most common. They are attached to the floor, ceiling and walls. Frame partitions are among the most stable and durable. For their manufacture, a variety of materials are used (glass, plastic, chipboard, MDF, etc.), which are mounted on an aluminum frame. The main plus is the speed of installation without dust and repair debris. Another advantage is a relatively high degree of sound insulation. Quite new to this market, solid glass fixed walls are gaining more and more popularity. They are made mainly of tempered durable glass, on which, as a rule, the company logo is applied. Often we see such partitions in boutiques of shopping centers, airports, large offices. They fully replace the wall, perhaps even with a door.

Mobile partitions divide workplaces that stand next to each other. They do not carry sound insulation, they are modules attached to each other. Saving usable space due to mobile structures was appreciated by many. They are made from any materials, complemented by fabric upholstery, shelves or drawers. Variety - desktop partitions, which are placed directly on the desk. They consist mainly of chipboard, equipped with various trays and shelves.

There are also straight and curved partitions in shape, solid and non-solid in design. When using solid walls, the zones are practically isolated from one another. Not solid, most often used as functional, for dividing the working areas of employees or reception.

The subtleties of choosing office partitions

To choose office partitions, special attention should be paid to the materials used, because depending on this, finished structures can be transparent, translucent, opaque and combined. They are made of glass, plastic, polycarbonate and drywall. Sometimes glass walls are doubled for better sound insulation and horizontal blinds are used for this. Often, shop windows are replaced with such partitions, and they are also used in entertainment complexes. As part of glass partitions there can be hinged or sliding doors, roller shutter mechanisms and turntables.

If you correctly approach the zoning of the room, then the overall interior will look stylish and impressive. When it comes time to choose partitions, then with special care you need to approach the issue of their safety, strength, fire resistance and environmental friendliness. The concept of any design will be complemented by modern office modules. They will save time and money, they are not tied to any room, because when moving they can always be taken with you.

0.027218818664551

Design of different types of office partitions

Modern office premises do not always have a standard layout, offices of employees and different departments delimited by blank walls. At the same time, the actual needs of customer service require the most competent and comfortable planning of office space. Its convenience for employees depends on this, as well as the speed and functionality of service for visitors.

The designs of stationary partitions allow you to plan the office space in the way that each client needs, taking into account the characteristics of his field of activity and the needs of office planning.

This is a modern, fairly inexpensive and fast way to delimit space and accommodate the required number of personnel and working equipment in it.

Rice. 1. There are many types of office partitions

There are various types of office partitions that allow you to achieve the desired functionality and appearance. At the same time, each of the types deserves attention, being very convenient for placement in the offices of banks, trade and industrial companies, travel agencies, dental clinics, beauty salons, large shopping centers and other office premises. The most commonly used stationary systems.

The design of a stationary partition is a set of modules, each fragment of which is a canvas attached to the frame. The system is fixed to ceilings and walls by means of fasteners.

Variants of stationary partitions and features of their design are presented in the following table:

More details about the design of various stationary partitions can be found in the section .

You can get acquainted with the different types of stationary partitions for the office using the following menu. Also, using its links, you can choose and study office sliding partitions, transformable and mobile systems:

Stationary

Sliding

Transformable

Mobile

Types of filling for office partitions

Glass is used to fill transparent office partitions. In this case, it is possible to conclude any variant of the material in the frame structure:

• plain glass 6-12mm thick;
• acrylic glass;
• polycarbonate;
• triplex;
• strained glass.

Rice. 2. Transparent types of office partitions allow you to save
visual integrity of the workspace

The choice depends on the financial possibilities and the required strength of the glass.

Triplex is a glass that provides virtually unbreakable glass partitions, but this requirement is sometimes too expensive for an office, the same applies to durable tempered glass. A more optimal choice for office space partitions is the use of polycarbonate or acrylic glass, which have good strength and reasonable price.

If you want to study in more detail the characteristics of filling for office partitions, you can familiarize yourself with other .

For blind partitions in the office, it is possible to use the following materials:

For office partitions with blinds, the following types are used:

• vertical;
• horizontal;
• roll;
• protective;
• pleated .

Rice. 3. Any office partition can be upgraded
one type of blinds

Also, blinds can be external, located inside the room - on top of the partition glass, or inter-frame - built into the double-glazed window.

Depending on the interior design, blinds materials are selected. For expensive cabinets, wood and fabric textures with artistic elements are suitable, more economical options are bamboo, linen straw, as well as synthetic varieties of fabric textures and metal.

Weight and dimensions of different types of office partitions

Transparent office partitions have an unlimited width, and the maximum height is 6m. Depending on the types of structures and the wishes of customers, various sizes can be selected. But, as a rule, individual partition walls are produced with a width of 1-1.5 m. The weight of glass partitions will depend on the thickness and type of glass chosen, as well as on the weight of the frame structure or its absence.

• Deaf office partitions in width can reach 10 meters. The width of each module is within 1-2 meters. The maximum height can reach from 3 to 6 meters. The weight of this type of office partitions depends on the weight of the frame and structure fillers, dimensions and number of sheets.
• Office partitions with blinds have dimensions depending on the width and height of the opening, the number of sections and the type of glass. The minimum dimensions of the blinds horizontally - 250mm, vertically - 100mm, and the standard width of the slats 16mm and 25mm. The weight of this design depends on the frame and fillers, the material of the blinds and other elements.

Choosing a profile for office partitions

The profile is used to create frame views of office partitions. For all-glass (frameless) structures, a profile is not required.

We offer office partitions with a profile made of the following materials:

• wood and MDF;
• PVC;
• steel;
• aluminum.

Rice. 4. Most types of office partitions are made in a metal frame

More detailed information about this material can be found in the section .

Briefly consider the advantages of the main frame materials using the table:

Fittings for stationary office partitions

• Transparent partitions

For stationary glass partitions, decorative elements and fasteners are used that fix the external filling and have a beautiful appearance - linings and clamps. Appropriate locks and handles, roller systems, synchronizers and closers, seals are selected for doors. These elements of fittings should have a discreet design, minimally standing out on the canvas of transparent partitions, and should also be combined with the overall style of the interior.

• Blind partitions

For blind partitions, the fittings are selected to match the filler. Its design features are similar to those of glass partitions. Their choice should be determined by the allowable loads, dimensions, design and content of such office systems and their additional elements.

• Partitions with shutters

In this case, the fittings are selected like glass partitions, but depending on the selected blinds, special fasteners and holders are used for their installation.

Rice. 5. All kinds of face fittings for office partitions have
discreet, strict design

More details about .

Consider the main manufacturers of fittings for stationary office partitions:

Advantages and disadvantages of different types of office partitions

Rice. 6. Variety of types of office partitions with their multifunctionality
is a merit in itself. the presence of additional sound insulation;

In our studio, it is an order of magnitude lower than that of competing organizations, while maintaining a high level of quality of service.

The minimum production time for various types of office partitions is 7 days. The duration of the order depends on the complexity and scope of work for each specific project.

Make your office comfortable and modern with our stationary partitions!

The employees of our studio will help you plan the location of the partitions in your office with high quality, conveniently place your employees and create the necessary zones and premises. They will advise which types of office partitions are better to choose, and what materials will be more appropriate in your work interior.

We will create a comfortable business atmosphere in your office, provide the proper level and style of the premises. We work for your convenience!

Office partitions are divided into stationary and mobile. This article will focus on mobile office partitions, which are so needed by many young, newly opened companies, where the issue is acute - how to arrange furniture in the office.

Types of mobile office partitions

Mobile office partitions are diverse: low and high, with and without wheels, with attachment to the floor, ceiling, walls, or without attachment (portable) free-standing, attached to the tabletop, with blinds, transparent and solid, folding, portable; light, all-glass partitions, etc.

Mobile office partitions can be thin (26 mm), the so-called office screens, and thick (up to 60 mm), which allows you to place cables, electrical wiring, blinds and even doors in them.

Low mobile office partitions allow you to visually highlight each individual employee. Such mobile partitions for Blitz-type office are easy to quickly assemble and disassemble. They are deaf and combined, as well as completely transparent. Suitable for mobile, temporary offices, banks, small offices, showrooms, dispatch services.

The office can be divided into zones not only with the help of special mobile office partitions, but also with the help of other furniture: a chest of drawers, shelving, cabinets and cabinets, and arrange the furniture in the office in the most optimal way.

Advantages of mobile office partitions

• Such partitions are mobile, as they are not attached to the floor or ceiling, walls (attached to the tabletop or to each other);
• They can be arranged in various configurations;
• Does not require an assembly specialist;
• Many models are foldable;
• No need to purchase tables (tabletops are included in the module of most mobile office partitions);
• Portable mobile partitions are attached only to each other;
• You can change the configuration and position;
• It is easy to install in a rented room, as there is no need to drill walls or floor, ceiling;
• When moving to another office, they are easy to take with you.

The choice of mobile office partitions, what you need to know

• The optimal height for the greatest comfort of an employee of a mobile office partition is 130-160 cm. (If you need to constantly transfer papers, 90-130 cm is better);
• A partition with a height of 130 cm allows you to see a person sitting next to you, and at 160 a colleague is not visible, but you can safely place hinged modules, shelves to put documents for colleagues there;
• The height of the partitions at 220 cm is suitable for a department that needs to be separated from others (middle managers, accounting, small meeting rooms);
• If you already have tables, the most economical option is to buy mobile screens for polycarbonate tables;
• There are free-standing screen-type office partitions;
• Fixed partitions are cheaper than mobile or sliding ones;
• The minimum distance for comfortable work between employees is a meter;
• If you are installing office partitions for your boss's office, choose one with blinds and double glazing.
• If there is no communication between employees, it is better not to use glass partitions;
• Glass partitions are good where there is little or no light or poor lighting, and if employees must constantly communicate with each other at work;
• The most durable aluminum office partitions;
• The fabric finish of the panels increases the sound insulation coefficient, and also allows the employee to pin a note on the fabric;
• The height of the structure greatly affects the price of office mobile partitions;
• Deaf plasterboard partitions are afraid of water (gypsum vinyl is not afraid of water);
• Near elevators, flights of stairs and in halls, only special fire-resistant tempered glass partitions can be installed.

What is the difference between mobile office partitions and stationary ones?

First of all, the fact that portable partitions do not have the same soundproofing properties as stationary ones.

How to figure out what partitions are needed for the office?

It is necessary to analyze the degree and frequency of contacts between employees (voice and visual contacts), the ways of moving around the office, the volume of workflow, determine the noise level within the department, and only after that, understanding how to arrange furniture in the office, choose the type of partition.

Which partitions are more practical - the choice of partitions in the office

To date, an excellent solution for planning office space are office partitions. They are quickly installed without unnecessary noise and dust. On the modern market there is a solid range of partitions for offices with different characteristics in a wide price range, aimed at a variety of customers.

To select the optimal type of partitions, it is necessary to clearly define the planned number of zones and their purpose. It may be worth using different types of partitions for the most efficient distribution of space.

Types of office partitions - which office partitions to choose?

Depending on the characteristics and purpose, office partitions are divided into three main types:

And now let's talk in more detail about each type and reveal the advantages and disadvantages.

This type of partitions is an excellent alternative to walls. They are fastened with screws and dowels to the floor, walls and ceiling. Partitions cannot be moved, so they are used when planning separate rooms on the territory of the office. They have excellent soundproofing characteristics.

In turn, stationary partitions are divided into two subspecies: assembled once or collapsible systems. One-time assembled partitions are puttied and painted after installation, so they cannot be reused after dismantling. Collapsible systems are mounted quickly without additional "wet" work, so they can be reused at a new location.

Advantages of stationary partitions:

• fast installation,
• strength and stability of structures,
• an alternative to walls that does not require approval from the BTI,
• good soundproofing,
• modern fashion design,
• glass partitions perfectly let in daylight, which helps to save energy,
• the ability to hide communications in an aluminum profile,
• the possibility of using blinds,
• the ability to install switches and sockets,
• the possibility of mounting doors with an electromechanical lock,
• the possibility of decoration.

Disadvantages of stationary partitions:

• impossibility of reuse after dismantling,
• the need for additional finishing work,
• massiveness of structures, coupled with additional load on the floors.

Mobile partitions can be easily moved in space, since they are not attached to the floor, walls and ceiling. Some of them are even equipped with wheels for convenience. They are great for visual separation of the work area. As a rule, in height they are not higher than human height, but not lower than a person in a sitting position. Mobile partitions are represented by three types: screens, panels, screens. Screens are installed directly on the table.

Advantages of mobile partitions:

• simplicity and ease of changing the layout,
• a wide choice of materials allows you to create an ensemble with office furniture,
• fast installation,
• the possibility of installing blinds (with double glazing),
• light weight,
• the possibility of mounting doors,
• affordable price.

Disadvantages of mobile partitions:

• poor sound insulation
• stability is lower than that of stationary partitions.

Sliding partitions allow you to transform the space in a matter of seconds. For example, with their help from a large conference room, if necessary, you can make a small meeting room, separating part of the room. To the guide rail, mounted in the space behind the ceiling, the required number of panels is suspended in the height of the room.

Office partitions have entered our lives so much that it is even hard to imagine: did they really not exist once? Today, when planning the interior of an office, there is a unique opportunity to avoid long repairs using modern office partition systems. And their diversity will allow you not to limit your imagination and desires by choosing the necessary planning solution.

On the floor and on the table

By appointment, all partitions can be divided into four types: stationary, mobile, desktop, transformable.

Let's look at the first type. Stationary partitions are attached to walls, floors and ceilings and assembled on site. Their task is to divide all premises into functional zones and create separate spaces (receptions, offices, etc.).

Often such partitions are also called "frame": the fact is that the structure is based on a frame. In turn, the frame consists of a profile on which panels of various materials are attached.

Leading foreign and Russian companies are constantly working on improving the systems of office partitions they offer. For example, the design bureau of the studio of office systems and technologies "Astarta prestige" developed a stationary office partition on a frame made of aluminum profile "Triasta".

The so-called "solid" aluminum is used as a raw material for its manufacture. In composition, it is identical to the material used in the defense industry.

When developing the system of office partitions "Triasta", the specifics of Russian buildings were taken into account, associated with the inaccuracy of the geometry of the premises - the partition is assembled on site, which makes it possible to adjust the structural elements to the mounting surfaces (floor, walls, ceiling) during installation.

So, the racks of the system are capable, if necessary, of being located not directly, but with the repetition of wall irregularities. The padding also takes these features into account. In this case, its shape is not rectangular.

High strength and rigidity of the entire structure is ensured by the use of reinforced mounting angles connecting the vertical and horizontal racks. In addition, the bearing elements of the system are equipped with additional stiffening ribs.

The second type is mobile partitions. They are also designed to divide the space, but, in addition, make it possible to frequently change the interior. Mobile partitions can be attached to furniture (usually tables) or walls without attachment to the floor and ceiling. Due to this, literally in one day, without additional costs, you can create new jobs or entire premises, changing the configuration of the space.

Unlike stationary structures, which are on average 3 meters high, mobile partitions are lower: usually about 2 meters, sometimes 2.1 - 2.2 meters.

The next type of partitions - desktop. They are also called "table screens". They are mounted on desktops in order to improve the ergonomics of staff workplaces. Their average height is 50 cm. It is possible to choose the color of the desktop screens, which will match, for example, the color of the furniture.

Moreover, for example, when developing the Russian series of camera furniture "Spektr", special attention was paid to solutions for open spaces: for this, ergonomically shaped tables are complemented by desktop partitions and shelves.

Transformable structures simultaneously play the role of partitions and doors. They are retractable or foldable. Sliding office partition consists of a fixed panel and a movable part moving along a suspended guide profile. Depending on the location of the rollers, partitions are suspended (above) and supporting (below). In the latter case, the guides are made in the depth of the floor (about 5 cm deep).

You can use them, for example, in restaurants: during the day you have separate rooms, and in the evening, "pulling the walls apart", you get a large room for a banquet.

Our intentions are transparent

The second sign by which all partitions can be qualified is the way their frame is filled. Filling can be transparent, deaf or combined.

According to the management of the Meat Land meat processing company, in whose office the vast majority of office partitions are glass walls, this solution makes the office space light and airy.

In a transparent partition, glass is used as a filling. Particularly popular in recent years all-glass partitions. The division of space while maintaining visual volume and maximum natural light is a requirement of modern design. It is easiest to achieve it with the help of this type of partitions.

Of course, ordinary glass in this case cannot be used, at least for safety reasons; tempered glass is widely used in such constructions.

It is about 6 times stronger than usual, and when destroyed, it crumbles into very small fragments with blunt ends, which cannot be hurt. In addition, tempered glass is not only a beautiful light-transmitting material, but also a self-supporting element of the entire partition. In other words, such glass does not require additional framing, which means that a unique integrity and beauty of the entire structure is created.

In the domestic market, the Dzerzhinsky Plant of Organic Glass from Nizhny Novgorod has a leading position in the production of sheets of organic glass for partitions. Among foreign manufacturers, we note such brands as "DEGUSSA", "ROHM".

Partitions can have single or double glazing. Apply different types of glass, including tinted, mirror, textured. Partitions with both double and single glazing allow the installation of inter-frame blinds in them.

If there is a need to create glass railings that exclude direct visibility through them, blind double-glazed windows are used, in the space between the glasses of which fiberglass, kaolin wool, matte, including synthetic, films are placed.

In the previously mentioned company "Astarta prestige", citing examples from this area, they also call the technology "Magic screen glass". Using the remote control at any time, you can make the partition either completely transparent or, on the contrary, matte.

The second type of sections - "deaf". In this role, a variety of materials are used: MDF, plastics, aluminum lining, chipboard, drywall. The partition wall using "deaf" materials has the highest soundproofing characteristics, often exceeding those of the main wall.

The third type, combined, will allow you to take advantage of all the advantages of glass and opaque material. The upper part of such a partition is transparent, the lower part is made of the materials listed above. They keep the lower part of the partition from possible damage and scratches.

Partitions around us

Finally, you can try to qualify all partitions depending on the application. Obviously, so far they are mainly used in offices, hence the stable combination of "office partitions", but the matter is not limited to working premises.

Recently, a new variety has been distinguished - "trade partitions". They are designed to create or separate commercial premises and include showcases, counters, retail windows and other items for trade (consumer panels, shelves for bags, etc.) in their design.

They use the so-called "stained glass". They are characterized by a large area, allowing you to create all-glass partitions up to 3 meters high and 2 meters wide.

Stained glass options are also diverse: transparent, frosted, tinted, mirrored, corrugated, patterned.

Sanitary partitions, as their name implies, are designed to create toilet and shower cabins in common areas. Given that such partitions are subject to frequent wet cleaning, they are usually filled with laminated chipboard and MDF.

Designer from Moscow Larisa Velikanova notes that "the fashion for open space has gone further: in addition to simple partitions, the main advantages of which are mobility and instant installation, a whole direction of designer partitions has appeared. They are distinguished by unusual legs, frames covered with fabrics, combinations of expensive materials. Instead blinds can be sprayed in the form of a variety of patterns.

Designer partitions can be used in reception rooms, meeting rooms, in general, where it is required to make a proper impression on visitors.

Very close to designer partitions and designs that can be called "representative". They are used in the offices of management and top managers. A distinctive feature is a rich finish, for example, under a tree; coloring of a partition profile under bronze or gold.

Plasma screens and other elements can be installed in such partitions at the request of the customer.

Let's add that practically any doors are easily mounted in modern partitions, not only traditional office equipment, but also non-standard equipment is built in, up to aquariums.

And if your office or other premises do not yet have office partitions, we are sure that you will have them in the very near future, and you will personally see all their advantages.

Alexander Mayorov, according to the press service of the company "Astarta Prestige"