How is the pvc decorative panel attached. Methods for attaching plastic panels to the wall. Fastening tools

The Windows operating system allows you to fine-tune the appearance of the desktop and panels so that the user is as comfortable as possible. This also applies to the taskbar you interact with all the time - the Start menu, running applications, open folders, time, running services, and more. In this article, we will figure out how to pin the taskbar to the bottom of the screen, and also consider the settings for this element in more detail.

Moving the panel

First, let's look at the case in which the taskbar is not at the bottom of the desktop. Before you fix it in one place, you need to drag it from below.

You can do this with just the mouse. You need to place the cursor on any free place on the taskbar and, with the left mouse button pressed, drag the cursor down the screen. Together with the mouse, it will change the position and the interface element - you can check this by rearranging the panel on different sides of the desktop. After changing the side, the position of the shortcuts on the desktop will move slightly.

Now the Windows 10 interface needs to be fixed so that you do not accidentally move it while working on the computer. To do this, right-click on the panel and select "Taskbar Settings" from the menu that opens.

After that, a window with detailed settings for this interface element will appear on the screen. To make it impossible to accidentally move the bottom bar when manipulating the mouse, you must enable the "Lock the taskbar" item.

There are also many other settings that allow you to pin the taskbar to the bottom of the screen. For example, in the column "Position" you can choose the side where the desktop interface will be located. You can use this function instead of moving the panel with the mouse, as described in the previous paragraph of the instruction.

What to do if the interface disappears?

The Windows operating system has an option whereby an unused interface can be hidden automatically. If you bring the cursor closer to the bottom edge of the desktop, the taskbar will automatically reappear.

If you want to pin the taskbar to the bottom of the screen on Windows 10 so that it does not disappear, follow these steps:

Open the options again as described above.
Find the item "Automatically hide the taskbar in desktop mode" and move the toggle switch to the "Off" position.
Close the settings window and check the function. Now the bottom panel is fixed and will not disappear when you switch to applications.

Additional options

In addition to the fact that you can pin the taskbar to the bottom of the screen through the GUI options, this can be done faster. Just right-click on the panel and select "Lock all taskbars" from the menu. Along with the main strip at the bottom of the screen, user panels will also be fixed.

You can pin any items (programs, folders, files) to the taskbar and create subgroups. To add any program/folder to the interface, you need to right-click on the executable file or shortcut of this utility and select the "Pin to taskbar" item in the menu. After that, the application icon will appear below. It will remain in place even after restarting the PC. You can unpin it by dragging it with the mouse or through the same menu.

We've covered all the steps to help you pin the taskbar to the bottom of the screen on Windows 10. You can also explore other options in the options window and customize the interface to your liking.

We will send the material to you by e-mail

Those who independently make repairs in the house are interested in knowing how to fix PVC panels to the wall. Useful recommendations will tell you how easy and simple it is to use this material, what are the ways to fix the panels, as well as how to do this work in stages. There are certain methods for installing plastic sheets in bathrooms and other rooms. Before starting work, you need to perform a careful calculation of materials.

With this material you can create any interior

How to fix PVC panels to the wall and ceiling surface: highlights

Polyvinyl chloride plates are used to decorate walls and ceilings, as they are characterized by a long service life and practicality. Such material is distinguished by a variety of shades, shapes and textures, which allows you to create a stylish and beautiful interior.

Plastic plates have the following advantages:

ease of installation;
moisture resistance;
long service life;
resistance to fungal infections and fire safety;
ease of cleaning and care;
acceptable price.

You can not only finish the bath with PVC panels with your own hands, but also use this material for the kitchen. It is used instead of tiles, and the price will be lower. The disadvantages include a low level of resistance to mechanical damage.

To work with plastic material, you will need tape measures, hacksaws, building levels, plastic profiles, sets of fixing parts, sealants, and skirting boards for ceilings.

Useful information! It is not recommended to use plastic plates in combination with expensive materials when decorating. It looks tasteless.

How to glue PVC panels on walls: practical recommendations

How to glue PVC decorative panels with mosaics can be seen in the video. Before you mount the plastic part, you need to prepare the base. At the same time, the old coating is removed, the cracks are removed, and the surface is leveled. The differences can be no more than 5 mm. Dirt and grease from the surface of the walls must be cleaned, as this may interfere with the adhesion of the adhesive.

Below are the options for decorating walls with PVC panels.

High-quality adhesive composition is transparent after drying, fast setting, strong fixation and resistance to sudden temperature fluctuations. Do not use hot glue for plastic fasteners.

Gluing sheet elements consists of the following steps:

cleaning the reverse side of the plate;
drying the product before applying the adhesive;
the distribution of glue is done in a dotted way;
mounting plates to the wall.

When using liquid nails, the plates must be tapped. For high-quality adhesion, the glue must be weathered. At the end of the installation, ceiling or floor plinths are attached. To do this, use self-tapping screws.

It is recommended to use plastic panels for finishing the kitchen. In this case, the assembly is carried out with small gaps. The slats should go under the wall cabinets and press tightly. The lower edges are fixed with skirting boards.

Useful information! To make the installation around the sockets, it is necessary to cut holes in the appropriate places. When carrying out work, turn off the electricity.

The nuances of mounting on the walls over the frame of the crate

Before sheathing, it is recommended not only to clean the surface, but also to use coatings based on antiseptic agents. Wooden bars are used to create the crate, but such structures should not be used for rooms with high humidity. Before use, the wood is thoroughly dried and treated with protective compounds.

The construction of the crates begins with the markup. You also need to correctly determine the lower level for mounting skirting boards. For reference, the most protruding part of the wall is taken. To control the upper and lower levels, you should use the level.

Video: wall decoration with PVC panels

Creation of suspended ceilings from PVC panels: photos of models and technologies

PVC panels are great for suspended structures. Similar material can be used for kitchens, toilets, and showers. For ceilings, panels imitating lining are often used.

PVC panels are also well suited for exterior decoration of the house. Manufacturers make them in different colors and with interesting patterns.

This will diversify the inexpressive appearance of the structure. The design is so simple that it is very easy to mount them. In order to do everything with your own hands, you should ask how to fix plastic panels to the wall from those who have already encountered such work.

What can be attached

Wall plastic parts can be attached to the base using:

Nails or self-tapping screws - in this case, the elements cannot be dismantled, they will break at the point of attachment.
A special stapler is a very convenient and fast way; the staples can be easily removed when disassembling such a finish.
Gluing liquid nails - this option is even more convenient than the previous one, but dismantling is impossible.

Each of the methods securely fastens the installed pvc panels both to the frame and to the bare wall.

Do you need a frame

Fastening of plastic panels is carried out on a wooden or metal frame, or without it. How do you know if a frame is needed? If the base is even without tubercles or depressions, without cracks that must be repaired, then you can do without a frame. Any method of fastening is suitable, the main thing is to choose according to the basis.

If the walls are wooden, wall panels can be installed using a stapler, nails or self-tapping screws, but if the base is concrete, you will have to stock up on dowels. Glue is a universal option, it can be used for any surfaces.

If the walls are completely uneven, a frame should be built before attaching the panels. As mentioned earlier, the crate can be wooden or metal. Wood is strong enough, but short-lived material. It quickly rots, especially if there is high humidity in the environment.

The wooden grate, on which the plastic panels are installed, must be treated with antiseptic and antifungal agents before installation. This will help to slightly extend the life of the material. For the construction of such a frame, an absolutely dry beam with a minimum size of 20x20 mm is used.

The metal crate will last much longer. This material does not decay and does not give in to corrosion thanks to a special covering. Also, it is not eaten by rodents or insects, which often happens with a tree.

Training

Before you start mounting the finish on the wall or constructing the frame, you must prepare the surface well. This will determine how firmly the elements will hold, and whether there will be problems with mold. For this:

Eliminate all dirty and greasy stains.
Remove traces of fungus.
If there is an old coating, it is dismantled.
Strong irregularities or cracks close up.
Treat the surface with a primer.

If the installation of plastic wall panels is carried out without a frame, then you can proceed after the primer has completely dried.

Frame installation rules

A properly installed frame will help to evenly fix the pvc panels and avoid tilting to one side or the other. It is important to consider that the crate should be placed perpendicular to the parts to be laid. That is, if the elements are mounted horizontally, then the frame strips are installed vertically on the wall, and vice versa, if the elements are vertical, then the crate is horizontal.

The first step is to make markings on the walls. This saves a lot of time. The starting line is marked at the bottom of the wall (horizontal frame) or at the corner (vertical). For the first option, be sure to use a level so that the line is perfectly even, for the second - a plumb line.

Next, a finishing mark is made on top of the wall or on the opposite corner. Additional lines are drawn between these two lines. The spacing between them must match the width of the part so that it can be attached. After the markup is completed, you can fix the elements of the crate.

To increase heat and sound insulation, you can install insulation in the cells of the crate before starting to fasten the wall panels.

How to pin elements

Considering that not everyone knows how to properly fix plastic panels, let's look at everything in great detail.

First you need to install the start, finish and corner moldings. These are special strips into which parts of the structure are inserted. They help to fix the entire installed canvas and hide the edges.
Next, install the first element and fix it with nails or glue. It must be set perfectly evenly, since subsequent parts are attached, relying on the first. In order to check whether everything is correct, you should use a plumb line or building level.
Subsequent laying of plastic panels is easy. The spike of one element is inserted into another and fixed. But you need to take into account the fact that when the temperature rises, the material can expand, so do not tighten the screws to the end and do not nail the nails too tightly. Otherwise, the plastic will crack at the attachment point.
In order for the joints to be as tight as possible, the edges of the panels are treated with a small amount of sealant.
If the panels are fastened to a metal crate, then special clips are used for fixing. They make the process easier.

Mounting with glue

Glue for pvc products is very toxic, so you need to use a respirator when working with it.

Fastening panels to a flat wall with glue is a very quick and convenient way. No additional holes need to be drilled in the wall.

moldings are also installed first;
a small amount of glue is applied to the prepared base;
fasten the first element, slightly pressing against the wall. For good fixation on the surface of the panel, you can walk with a rubber roller. For another 15 minutes, the element can be moved, leveling, but then the glue will harden;
then all the remaining parts are attached.

Before you fix the wall finishing panels with your own hands, you should carefully prepare and the facade updated in this way will last a very long time. Moreover, this surface does not require special care. Just warm soapy water will suffice.

How to fix plastic panels to the wall: installation rules

There are several ways to attach plastic panels. But you do not need to choose the simplest one, you should choose the one suitable for the material of which the wall consists.

How to fix plastic panels - step by step instructions

Thinking about the repair, we always want to get an excellent result, and at the same time do without extra costs and meet the minimum deadlines. Another important point is that the repair work does not cause a lot of trouble, does not leave behind dirt and does not greatly interfere with the neighbors.

An excellent solution in this case would be the installation of plastic panels. Our instructions will help you understand how to fix plastic panels. They are easily mounted on walls or ceilings and do not need to pre-level the surface.

Plastic panels are easy to care for and are ideal for rooms with high humidity (bathroom, sauna, boiler room). A variety of colors and textures will help create a unique and cozy interior. For the installation of such panels, it is enough to have several tools at hand.

Necessary tool and preliminary preparation

The tools necessary for fixing plastic panels can be found in almost every home:

electric drill;
wood saw;
scissors and a hacksaw for metal;
screwdriver or screwdriver;
tape measure, building level, pencil or marker;
hammer, stapler;
ladder.

First, use a tape measure to measure the work surface, this will allow you to correctly calculate the required amount of materials.

The surface must be freed from wallpaper. If the panels are glued, be sure to clean the walls or tiles from paint and dust.

Installation features and procedure

The panels are fastened either directly to the wall or to a crate prepared in advance. To mount on the wall, it must be perfectly flat. The crate is wooden bars or slats that are screwed to the surface at a certain distance from each other. For walls, the width between the rails should not exceed 30 - 40 cm, for the ceiling - no more than 30 cm. The rails for the crate are attached to the wall perpendicular to the direction of the panels.

If the wall to which the rails are attached is wooden or any other wall into which self-tapping screws are easily screwed, then it is best to use them to fasten the bars. If the wall is concrete or brick, then it is best to fasten the bars with dowel-nails or with ordinary dowels and self-tapping screws.

An example of fastening a crate for plastic panels.

Before you get started, you need to understand how to properly attach the plastic panels to the wall.

If you decide to fasten the panels to the crate with nails, then keep in mind that the reuse of the material will be impossible, since, most likely, the integrity of the panel will be violated during dismantling.
The best method of fastening is with clamps.
But the use of staples that are driven in with a special stapler is also a good option.
Another good option for fastening panels is self-tapping screws.

The most common ways of fastening plastic panels.

After you have decided on the method of fastening the panels, you need to do the following:

First, install the fittings: the final element, the outer or inner corner. If the panel closes the wall to the ceiling, then fix the ceiling plinth to the top beam.

Available types of fittings for plastic panels.

Insert the panel into the fixing element with a narrow fixing flange. The panel is fixed from the side of the wide mounting shelf with nails or brackets.

After making sure that the first panel is level, insert the next one with the narrow end into the groove of the previous panel. Try to mount panels closely to each other.

Installation of the necessary fittings and the first plastic panel.

The last plastic panel that completes the row must be inserted with force between the final element and the previous panel. If the panel needs to be reduced in width, then cut off the excess with a knife, moving along the panel.

Features of mounting plastic panels on walls

If the room is dry and the walls are even, then the panels can be mounted directly on the wall without using the crate.

Fastening panels with glue directly to the walls without using a crate.

In a room with high humidity, a plastic or metal mounting profile should be used as a crate. In this case, the panels are attached to the rails with special clips, which greatly facilitates the installation and dismantling of the structure.

Fastening panels using a plastic profile using special clips.

Consideration should be given to the expansion of the material with temperature changes, so when adjusting the height of the panels, leave a small gap. If a wide beam is used for the crate, then a heater or soundproofing material can be placed in the resulting space between the wall and the panels.

Features of mounting plastic panels on the ceiling

Now consider how to attach plastic panels to the ceiling. Before installation, it is necessary to determine the distance between the panels and the ceiling. This gap will depend on the type of lighting. If you plan to install recessed lights, then the distance should be at least 10-15 cm, so you can completely hide the wiring. Mark in advance with a pencil the places of the lamps, cut out the holes and install the bases of the lighting devices.

Metal crate for mounting plastic panels on the ceiling in the bathroom.

Next, you follow the same steps as when mounting the panels on the walls. In a room with a flat ceiling, you can do without crates. Install the ceiling plinth on three walls before starting work. Use a building level to evenly place the panels.

When installing plastic panels in a damp room, fill the gaps in the ceiling with silicone sealant to ensure complete watertightness.

1. Cut and drill panels face up. For cutting, use a hacksaw, a hand saw or a construction knife. Always wear goggles to protect your eyes.

2. Apply glue directly to the wall. Draw a grid with even lines, leaving no empty areas. Use only special building glue "liquid nails".

3. When driving nails into the panel during installation, be careful not to hit the surface with a hammer, otherwise dents will remain.

4. Clean plastic panels with soapy water. Do not use abrasive cleaners, scouring pads or solvent-based cleaners.

Now you know how to fix plastic panels to the wall and how to care for them. Installing plastic panels does not require much time and is within the power of any beginner. By choosing this easy-to-install material, you can create a unique interior with your own hands. Among the variety of panels that imitate stone, wood, paper of various colors, you are sure to find an option to your liking.

How to fix plastic panels to the ceiling or wall correctly and without errors

Step-by-step instructions will help you decide how to mount plastic panels on walls or ceilings, you will learn how to mount, various tips and nuances.

How to fix plastic panels to the wall with your own hands: detailed instructions

If you are thinking about decorating walls or ceilings in the bathroom, hallway, kitchen, balcony or other areas with high humidity, pay attention to PVC panels. This is the best choice for price, practicality and quality. They wash well, do not fade and do not deform from moisture. And the biggest plus is the simple installation of panels. They are ideal for leveling walls and give you the opportunity to realize many design ideas. How to fix plastic panels to the wall: all the subtleties and nuances.

Necessary materials and tools

Plastic panels are quite easy to install, so it is possible to sheathe the walls or ceiling with your own hands. To make the installation yourself, you will need the following tools:

Drill or perforator depending on the walls to be paneled. For a brick and concrete wall, it is better to take a puncher; for the rest, a drill is suitable.
Metal shears will be required for cutting a metal profile, you can use a grinder.
Screwdriver. Needed to connect frame parts and fasten PVC panels to the profile.
A stapler and staples will be needed if plastic is attached to a wooden crate.
Construction knife or hacksaw - for cutting panels and moldings.
Miter box - an indispensable tool for proper cutting at the right angle.
Roulette, marker, level. For small building work.

If the desired tool is ready, you can go to purchase finishing materials. You will need:

plastic panels;
rails for fixing plastic;
metal profile and accessories for it or wooden beam 20x40 mm;
dowels, self-tapping screws.

But before making purchases, you should take measurements of the room and calculate the required amount of materials for future decoration.

Calculation of materials for installation

Plastic panels are produced in various colors and sizes. Most often, the length of the panels is 2.7, 3 or 6 m, and the width is 10, 25, 37.5 and 50 cm. The thickness of the panels is 8 or 10 mm. Therefore, having decided on the choice of plastic and the dimensions of the walls, you can make the necessary calculation of the amount of material.

To do this, it is necessary to make measurements of the length and width of each wall, determine the direction of laying plastic panels (along the wall or across) and calculate the consumption according to these dimensions.

To install the crate, it is worth purchasing a metal profile or a wooden beam.

Fixing plastic panels to walls

PVC panels can be finished in two ways:

on the frame (recommended for large uneven walls)
on glue or liquid nails.

Installation of plastic panels using a metal or wooden frame.

To finish the walls with plastic panels, a frame made of metal or wood is required. Before installation, we clean the walls of excess dirt and dust, treat them with a special antifungal agent and draw a grid of battens on the wall using a level. We set the gap between the rails to be 40 - 50 cm. We drill holes along the marking lines at a distance of 50 cm and fasten the profile to the wall with suitable fasteners.

For relatively flat walls (difference no more than 5 mm), you can make a frame from a wooden beam, and for very crooked ones, it is better to use a metal profile, since it can be fixed at some distance from the wall using special fittings. After you have made sure that the crate is securely installed, you can proceed to the fine finish.

It is better to start work from the corner farthest from the entrance, as this is the most noticeable part of the room and any pruning will be very noticeable. First, the starting strip is attached at the bottom and top of the crate, and on the side - the inner (outer) corner, depending on the installation location. These slats perform the function of fixing the plastic and hide the unaesthetic appearance of the panel cuts. After that, you can mount the plastic. We cut off the panel of the desired size (about 0.5 cm less, taking into account the deformation from temperature changes) and insert it into the guides, first at the top and bottom, and then on the side. We fix the plastic with a screwdriver or a stapler in each strip of the crate. We fasten the following strips accordingly.

The most difficult stage is the installation of the last panel. To do this, cut the panel 0.5 cm smaller than the required size. We insert it first into the corner profile, and then snap it into the groove of the previous panel. So you do not deform the guides and carefully finish mounting on the wall.

Home heating solution: electric boiler

Installation of PVC panels on special glue or liquid nails.

If your house has perfectly smooth walls, it is possible to install plastic panels without a frame. This method has many advantages and practically no disadvantages:

saving space (which is important for small rooms);
lack of dirt and dust during installation;
fast installation;
lower costs (no need to buy materials for the frame);
no special skills needed.

For this method of mounting plastic panels, careful preparation of the walls is required. Clean them of foreign objects (wallpaper, old paint, crumbling putty), repair visible irregularities and primer. Now you can attach the panels. If the wall allows, during the installation process, you need to fix the panel with one self-tapping screw to the wall approximately in the middle - this will provide a more reliable fastening. In the corners of the room, a special flexible corner is glued, the dimensions of which vary from 2 to 5 cm. It gives the room completeness, forms the inner and outer corners and hides the curvature of the corners.

This method of installation has only one drawback - you can not hide the wiring and install built-in lights. Therefore, the choice is yours.

Fixing plastic panels to the ceiling

One of the advantages of using PVC panels on the ceiling is the ability to hide wiring, exhaust pipes and other communications, as well as place built-in lighting.

For the installation of plastic panels on the ceiling, a special frame made of metal profiles is used (it gives more opportunities for embedding various communications through the use of various special fittings (suspensions, crabs, etc.), and does not deform from moisture, unlike wood). Before installing the frame, it is worth preparing the surface of the ceiling (clean it of old paint, whitewash, peeling plaster and dust, treat it with an antifungal coating to avoid the development of fungus in the room).

First, using a level, we make markings on the walls of the room at a distance of 5 - 10 cm from the ceiling. Next, we install the grid elements at an interval of 30 - 40 cm from each other. At a greater distance, the plastic may sag. Further along the perimeter we fix the starting profile or a special baguette for plastic, it is better to trim the corners with the help of a miter box or right at the installation site with a construction knife. Now install plastic panels.

How to fix plastic panels to the wall - recommendations for self-installation

How to fix plastic panels to the wall, a description of the process. Possible mounting methods. Installation of PVC panels on the ceiling. Recommendations for self

How to properly fix plastic panels to the wall: with and without crates

In skillful hands, wall cladding with plastic panels resembles assembling crafts from a children's designer: the same pleasant-to-touch details, the same principles for attaching PVC panels: either with glue on a pre-prepared surface, or with bolts on a pre-prepared frame.

But if you look closely, each method of their installation will have its own nuances that must be taken into account.

Do-it-yourself frame method for mounting plastic panels

The essence of this method is to fix the panels with your own hands on a special frame, called a crate. Its main difficulty is to correctly calculate the upper and lower levels of the crate, which must run strictly parallel to each other: the uniform distribution of the guides on which the PVC panels will subsequently be attached depends on this.

However, this does not mean that additional preparation is not needed for such installation. The latter directly depends on the purpose of the room.

In rooms with stable temperature and humidity - such, as a rule, are living rooms - it is enough to simply remove the old peeling coating from the walls with a spatula, carefully inspect for cracks, crevices and chips and, if necessary, seal them with putty or plaster.

If temperature fluctuations and humidity are common in the room (remember, for example, bathrooms, kitchens, balconies), additional waterproofing of the walls will be required.

The waterproofing layer is applied with a roller or a paint brush on pre-moistened walls. And after it dries, the walls are treated with an agent against mold and fungus.

Most often, the crate is made either of wood or metal.

Wooden blocks of at least 20x20mm in thickness are cheaper, but they are less durable and not suitable for rooms with a high level of humidity. Therefore, before use, they must be properly dried (the permissible moisture content of the tree should not exceed 12-15%) and be sure to treat with an antiseptic to protect against decay and insects.

The metal profile is more expensive, but suitable for any premises, stronger and more durable. At the same time, a UD profile is distinguished, with the help of which the crate contour is formed, and a CD profile inserted into it, which serves as intermediate elements (guides).

But regardless of the material before its installation, you need to stock up:

building level and plumb - to determine the position of the main elements of the crate;
dowels - for attaching it to the wall;
screws - for fastening its elements to each other;
tape measure - to measure the distance between the guides;
material for substrates under the guides - wood or thick plywood;
screwdriver and drill - to facilitate the work.

To cut a metal profile, you will need metal scissors. For additional work with wooden blocks - a saw with medium teeth, a chisel, a mallet.

Mounting the batten to the wall

The installation of the crate can be divided into several stages

Marking the frame for wall panels

It begins with the definition of the lower level, which runs along the floor in such a way that later a plinth can be screwed onto it. In this case, the “reference point” is the most protruding part of the wall: focusing on it, they determine the distance by which the crate will subsequently recede from the wall.

Then comes the determination of the upper level, passing along the intended height of the ceiling, and then the side levels. When setting the upper and lower levels, it is necessary to use the building level, and when setting the side levels - a plumb line.

Bringing the frame to the proper level

In general, all levels are not attached to the walls closely, but on direct suspensions, observing the necessary indentation. The outer edges of the batten should be at the same level, which can be adjusted either by grinding the battens of the batten or by substrates.

The distance between the screws on which the profile is attached should be 20-25 cm for a wooden profile and 15-25 cm for a metal profile.

Fastening rails inside the frame frame

To begin with, they cover all the protruding elements of the wall, as well as window and door openings.

The purpose of this action is to securely fasten the edges of the skin elements along their boundaries. Then intermediate profiles are mounted.

When installing them, it is necessary to take into account how the PVC panels will be attached - horizontally or vertically: they are fixed perpendicular to the guides.

Wooden bars (for wooden crates) and CD profiles (for metal) are inserted into the frame frame and fixed with screws along the edges. To give the metal profile additional rigidity, it is recommended to use U-shaped profiles - they are screwed to its guides after the profile is installed and fixed.

Naturally, when carrying out this type of work, do not forget to use the building level. But here the crate is ready. And it's time to start installing PVC panels.

How to fix?

To do this, stock up:

plastic panels, which, before starting work, must “acclimatize” by staying in the room intended for decoration for at least a day;
moldings, that is, special corner profiles that ensure smooth joining;
clamps - special brackets for fastening;
a building level that helps to determine the location of the first PVC panel on the crate as accurately as possible, serving as a guide for further installation;
with a special knife or saw for metal for cutting panels.

The installation of PVC panels does not begin with the installation of moldings - internal and external: it is from them that you will have to build on in the future.

The first panel is installed with a spike in the profile, attaching it to the crate with the help of clamps. The second panel is installed in the groove of the previous one and fastened in the same way. Thus, they reach the end of the wall.

The latter is cut in such a way that it can be installed all the way to the finishing corner, while the distance between its spike and the groove of the previous panel should be 2-3 mm.

The cut edge is inserted into the profile, then the panel is pulled out and connected to the previous panel.

If it is necessary to hide the moldings, the installation technology of plastic wall panels becomes more complicated. The first panel is attached strictly in the very corner, the next - close to it. A spike is removed on one of the corner panels, as a result, a groove appears on the end.

This panel is pushed onto the hook brackets installed on the second profile. The next corner panel is inserted into the starting profile.

Installation of PVC panels without crates

The essence of mounting panels without crates is to glue the panels directly to the wall. And its main difficulty is in the preparation of the walls, which require careful alignment, and the correct selection of the adhesive composition.

The initial preparation of the walls is the same as with the frame method: the old coating is removed and the cracks are sealed. Of course, it is difficult to perfectly align the wall, however, the allowable size of drops, bumps and pits should not exceed 5 mm, otherwise the plastic may peel off or be damaged.

And taking into account the fact that a dusty, dirty and greasy surface is not able to provide sufficient adhesion to any glue, there is a need for high-quality cleaning of the walls: washing off the whitewash, removing grease with detergents, priming.

The range of glue on the modern market is great. For do-it-yourself installation of plastic panels, universal tools such as Kleiberit 636, Emfikol 34012A or Crystal Moment are perfect, but it is best to use glue designed specifically for gluing plastic. Good glue:

after drying, it becomes transparent and forms a film layer;
not afraid of moisture, frost and temperature changes;
bonds surfaces for a long period and sets quickly.

It provides too rigid fixation and, "interacting" with plastic, which has a considerable coefficient of thermal expansion, deprives the panels made of it of free play, thereby contributing to their separation from the walls.

More reliable non-expanding polyurethane sealant and liquid nails - their sufficient plasticity does not allow the panel to come off the wall during temperature fluctuations.

PVC panels are glued to the wall as follows:

the panel is taken and the back side is wiped with a damp cloth to remove dust;
glue is applied on the back side in a dotted way, the distance between the drops of which varies from 25 cm to 35 cm;
then the panel is applied to the wall.

If liquid nails were used when trying to glue it, it is better to tap it and tear it off: this type of glue requires weathering for 5-7 minutes - only then it will acquire additional rigidity and will not allow the panel to lag behind the wall after pressing it again until it is completely dry.

They simply stick on transparent silicone, wiping with a damp cloth to remove excess silicone. The size of such inserts ranges from 20 mm to 50 mm, depending on the curvature of the corners. If it is required to glue PVC panels around the outlet, the place for the outlet is pre-cut out, and the electricity is turned off.

At the last stage of installation, floor and ceiling plinths are installed, which are fastened with self-tapping screws. The joints between the panels are processed with mounting foam or transparent silicone sealant (the latter is preferable in rooms with high humidity).

Latest materials

When repairing the balcony, I decided to finish the walls with plastic panels. And although I have never worked with this material, I ventured to try. It turned out that there is nothing complicated in working with PVC panels. I used a metal crate, the main thing is to mount it correctly, observing all levels. And then further work is not difficult. The panels are mounted quickly, without any experience I did all the work in one day.

After the granny, the apartment was inherited, naturally not in the best condition, so we decided to make a small repair. The husband offered to finish the toilet with pvc panels, not expensive and neat. We found a master on the ad, in the end, we got a very nice toilet, but what was our surprise when we saw that on one wall, the panels were attached upside down)) This “jamb” did not immediately catch my eye, but then it became insulting, after all, we gave normal money for work, and hoped to accept quality work. After all that has happened, dear friends, I can advise you to hire craftsmen only on the recommendations of friends or from decent repair companies!

How to fix plastic panels to the wall: basic do-it-yourself mounting methods

Correctly fixing PVC panels at first glance is quite simple. However, this work has its own nuances, depending on the condition of the walls, on the method used and on the availability of certain knowledge on working with plastic as such.

Savings often become the main factor when choosing finishing materials for repairs. This explains the popularity of pvc panels. Manufacturers managed to combine seemingly incompatible things. Such as external attractiveness and democratic price. And add to this the ease of installation and we get an almost perfect finishing material.

In this article, we will talk about how to fix pvc panels to the wall, and we will talk about three ways how to do it yourself.

The choice of how to attach pvc panels to the wall depends on many factors. Here is the humidity of the wall and the room and communications, and even the need to save space, which is especially important when it comes to finishing the toilet or bathroom, which are traditionally small.

It is not necessary to start from considerations of economy. The cheapest way is not always the best.

Below we will talk in detail about which mounting of pvc panels on the wall is best suited for a particular situation, but for now let's find out what difficulties we may encounter during the repair process:

Humidity of walls and bridges of cold. Plastic is not at all afraid of water and can be in constant contact with it, but it does not have vapor permeability at all, which means that over time, the moisture accumulating under the finish will begin to grow into a fungus or mold.
Availability of communications. Electrical wiring can still be hidden in the wall or, on the contrary, moved away, but water pipes (see How to ditch walls under pipes in several ways) or heating systems are much more difficult to hide, and sometimes even impossible.

Space saving. Below we will talk about fixing pvc panels to the wall through a bar. And this method can significantly reduce the area of \u200b\u200bthe room. Before you get started, consider whether you are ready to sacrifice a few cherished centimeters or not.
Curvature of the walls. Often there are so curved walls that it is very difficult to finish them. Here you have to either level the surface, or sacrifice centimeters and choose a mount through a beam.

Now that the main difficulties have been identified, inspect your room in which you are going to make repairs, and carefully read the article to the end in order to know exactly which pvc panel attachment to the wall is best for you.

Method 1: Liquid nails

The simplest and cheapest way to mount pvc panels to the wall, but only on the condition that you have perfectly even walls. Liquid nails are the unofficial name for a special silicone adhesive that dries very quickly and securely holds not only plastic, but also glass and wood.

Liquid nails are applied to the panels in even stripes, after which it is applied to the wall. The curing time of the glue is only a few minutes, so the entire repair will not take much time.

Despite the fact that the adhesive mounting method is the most economical and fastest, it is not always suitable, and experts advise using it with caution. The thing is that the panels are in direct contact with the wall, and as we said above, condensate will constantly accumulate on them, which simply has nowhere to evaporate from under the plastic.

Communication can also be a significant barrier. In the case of mounting on a beam, they may remain under the finish. Here, they will either have to be removed inside the wall, or silently pushed aside and let over the surface of the panels, which does not always look nice.

Important! fixing a pvc pipe to a wall can also be done using liquid nails, but you need to choose a special, heat-resistant glue that does not liquefy when the temperature changes.

The evenness of the walls can also become an obstacle for this method of fastening. The difference should be no more than two centimeters, or the surface of the walls will have to be leveled with plaster, and these are additional financial costs.

Method 2: Nails, stapler, screws

Each pvc panel has a small tongue under the groove. It is in it that the fastening is made. You can use any convenient fastener, whether it be small shoe nails or a construction stapler. By the way, working with a stapler is much faster and more convenient.

A significant difficulty is the need to build a frame to which the panels are attached. Of course, if you are the owner of a wooden house and your walls are well protected from condensation, then you can do without it.

The frame is usually made from wooden blocks. It is easier to attach to them in any convenient way, but as an alternative, you can use a profile for drywall, but here you already have to work only with self-tapping screws, since neither nails nor staples will simply hold on to the metal.

So, the first thing we need is to fix the bars to the wall. This can be done using dowels with plastic sleeves. Just lay the beam horizontally against the wall and drill a hole through it into the wall. Hammer the dowel and repeat the operation in increments of about 30-50 centimeters.

Important! Before you begin to fasten the bar, be sure to treat it with protective impregnations that will protect the tree from moisture, rotting and bugs. The better the wood is impregnated, the longer it will last.

The distance between the bars should also be no more than 50 centimeters, so that a deflection does not form on the panels, and they firmly support the weight if someone leans on the wall.

When the crate is ready, you can proceed to fixing the panels. They usually start from the right corner of the room. The first panel is fastened with a comb to the corner, and fasteners are hammered into the groove. The second side is fixed in the same way. Now we insert the next panel, and fasten it, but only in the groove, since it is already fixed on the side of the ridge.

Method 3: Kleimers

Kleimers are special brackets that are used to fasten any tongue-and-groove finishing materials. As you can see in the photo, the kleimer has a special fixing tongue, and a hole for a screw or nail. Working with them is very fast and convenient. Moreover, this is the only available way of fixing in a new house.

Walls built less than a year ago will shrink. It is imperceptible to the eye, and the finish can be reflected very strongly. Kleimers do not fix the panel, as they say, tightly, and allow for a slight curvature. As a result, the walls may sag while the panels remain in place.

If you do not quite understand how to attach pvc panels to the wall, then we suggest you watch the video in this article, which clearly shows the whole process. So, we figured out the three methods, but in order to make a high-quality fastening to the wall of a pvc panel, this knowledge is not enough. There are many nuances and subtleties of the process, which we will tell you about further.

So:

If you decide to treat the bar for the crate with impregnation, first cut it into the desired size. This way you can cover all parts, and even those that appear after cutting.
Before attaching PVC panels to the wall with liquid nails, make sure that the surface is thoroughly cleaned of dust. And most importantly, remove all grease or oil stains.
When choosing pvc panels in the store, be sure to pay attention to their smell. If the panels smell like chemicals, look for another manufacturer. It will be impossible to get rid of such amber.

If you use self-tapping screws for fastening, take only those that have a clamping cap. They do not tear the plastic and securely fix it to the base.
Plastic has slight thermal expansion, so when installing panels, leave small gaps near the floor and ceiling. To compensate for the deformation, 3 millimeters is enough, which will completely overlap with a decorative corner.

Using these simple rules, you can easily make repairs in your home that will delight you for many years.

And finally, I would like to add: in this article we only superficially described the mounting methods, but if you need detailed instructions on how to attach a pvc panel to a wall, then it is probably already on our website.

The taskbar is one of the main mechanisms for managing and interacting with the system in Windows. Therefore, the comfort of your work with the OS and the computer as a whole will directly depend on its settings and the settings of those important elements that are located on it.

Task bar

To go to settings Taskbars and start menu you need to right-click on start button in the lower left corner of the screen and in the context menu that opens, select the item Properties. After that, a window will open in front of you Taskbar and Start Menu Properties, whose component settings we will consider.

By the way, access to the taskbar settings can also be obtained from Control panels by clicking on the item with the talking name Taskbar and Start Menu.

The Taskbar and Start Menu window contains three tabs: Task bar, Start menu and Toolbars, which are responsible for setting the parameters of the corresponding Windows components.

Customizing the Taskbar and Notification Area

At the top of the tab are settings that are responsible for the design and display of the taskbar.

Pin the taskbar . By checking the box in this item, you can fix the taskbar on the monitor screen in the place where it is located at the moment. In this case, it will be impossible to stretch, move or collapse. As a rule, this item is checked by default. If you want to increase the height of the taskbar (when located at the top or bottom of the screen) or its width (when located on the left or right of the screen), as well as resize the notification area and toolbar, then you need to uncheck this item. After that, you can do all the above operations by dragging the borders of the desired areas with the mouse.

Automatically hide the taskbar. Activating this option will allow you to use the maximum area of the desktop when working, since the control panel will be hidden and will no longer be displayed on the screen on top of all windows. To open the panel in this mode, move the mouse cursor to the edge of the screen along which it is located.

Use small icons. This option allows you to reduce the icons of programs and open applications located on the taskbar. Thus, it is possible to achieve an expansion of the workspace and an increase in the number of displayed elements on the panel itself.

Position of the taskbar on the screen. Allows you to select from the drop-down menu the place where the panel will be placed on the screen. You have four options: Bottom, Top, Right or Left.

Taskbar buttons. At this point, you can choose how the icons of running programs and open windows will be displayed on the taskbar:

Always group, hide labels. This mode is activated by default and allows you to expand the free space on the taskbar due to the fact that the icons of similar open applications are grouped, and the icons themselves do not have signatures of their names. For example, if you have several Explorer windows open at once, they will be grouped into one icon on the taskbar, which will be displayed as several rectangles superimposed on each other.
Group when filling the taskbar. Unlike the previous version, this mode is more informative for the user. All icons of open applications are located on the taskbar separately and have signatures of the names of the windows in which they are running. Icon grouping occurs only when the taskbar is full and there is no free space to place new icons.
Do not group. Grouping icons of open programs does not occur, under any circumstances.

In the middle of the Taskbar tab is the item notification area , which is responsible for setting the display of system icons and background program icons, as well as their messages in the notification area (tray).

After clicking on the Settings button, you will see a window with a list of all background and system application icons, next to which you can select their behavior in the tray from three available options:

Show badge and notifications
Hide icon and notifications
Show only notifications

Below the general list of all icons are items Turning system icons on and off(Clock, Volume, Network, Power and Action Center), as well as Restoring Default Icon Behavior. You can also enable the option Always show icons and notifications on the taskbar.

And finally, in the lower area of the tab we are considering, there is an option setting Desktop PreviewusingAeroPeek. Activating this function allows, when you hover the mouse cursor over the button, Minimize all windows, produce a quick temporary view of the content desktop. At the same time, open windows are not minimized, as happens when this button is pressed, but become transparent.

Customizing the Start Menu

Let's move on to studying the next tab of the window with a telling name Start menu. As you probably already guessed, options are located here that are responsible for setting the parameters of one of the key components of Windows system management, which is called using the button of the same name located at the very beginning of the taskbar.

The appearance of the Start menu and the elements of which it consists, as well as the behavior of objects and icons in it, is affected by a lot of options that simply would not fit on this tab. This is probably why the developers put them in a separate window that opens after pressing the button Tune. We will talk about this a little later, but for now let's return to our bookmark and consider those few parameters that are nevertheless located on it.

Power button action . Using this item, you can configure the system action that will occur after you press the physical power button located on the computer case. To do this, select any of the six options from the drop-down menu:

Shutdown- leads to the complete closure of all programs, exiting the system and turning off the computer. This action is set by default.
User change- causes the user to log out of the system to the account selection screen without closing running programs.
Ending a session- causes the user to log out of the system to the account selection screen, closing all running applications.
Computer lock- leads to blocking the system without closing running programs. The user will need to enter a password to resume work.
Dream- puts the computer into a low power state. At the same time, all parameters of the current session of work are saved, which allows you to quickly resume work in the future.

Confidentiality . This option contains two options that allow you to show or hide recently opened programs, files, or documents on the left side of the Start menu. Everything is simple here - if the checkboxes are checked, then the display is allowed, if unchecked, it is prohibited.

Now let's look at the parameters that are contained in the window Start menu customization called by the above button Tune.

This window contains quite a few settings, but there is no point in considering all of them in detail. Many items have self-explanatory names and do not need any additional comments, but we will still make a little clarification about some of them.

Most of the Start menu settings are related to the display of thematic user folders and menus in it, including: Videos, Music, Documents, Homegroup, Games, Pictures, Personal Folder, Favorites, Recent Documents, TV Recordings and Downloads, as well as basic elements management group: Administrative group, Run command, Computer, Control Panel, Network, Connection to, Default Programs, Help, Devices and Printers.

Depending on the menu item, several display options can be applied to it:

Do not display this item
Display as menu- the group will be displayed on the right side of the Start menu as a folder with an arrow that opens automatically when you hover the mouse cursor.
Display as link- the element will be displayed on the right side of the Start menu as a regular link, after clicking on which, a new window will open with the contents of the folder of the same name.

Highlight recently installed programs . If this option is checked, then the system in the Start menu and the All Programs group will highlight in dark yellow new (recently installed) applications and the folders that contain them.

Search other files and libraries . An item that allows you to expand the search locations for the necessary information or speed up the search process itself by disabling scanning of shared folders.

Search Control Panel Programs and Features . When this option is activated, you will be able to search for the desired objects in Control panels systems.

Large icons . Unchecking this item will reduce the icons of the most frequently launched programs, the list of which is located on the left side of the Start menu. This will increase the number of displayed applications in this list.

Allow context menu and object dragging . Activating this option allows you to call the context menu of Start menu items, as well as drag them with the mouse to various work areas of the system. For example, you can drag the program icon from the Start Menu to the Desktop, or vice versa, add a link to the application to the Start menu by dragging the icon from any open window there.

In addition to the above options, at the bottom of the settings window there are two more elements with which you can adjust the size, or rather the height of the Start menu. They regulate the display of the number of positions in the lists of recently used programs and items.

Customizing Toolbars

As in previous versions of operating systems, Windows7 implements the ability to work with toolbars that serve to quickly launch program components and access resources.

Initially, the system includes only a few standard toolbars: Address, Links, Tablet PC Input Panel and Desktop. But as new applications are installed, the list of these panels will expand. For example, in our case, you see the appearance of an additional iTunes panel.

You can also create your own toolbars. To do this, right-click on an empty space on Taskbars and in the context menu that opens, select Panels and then the command Create Dashboard in.

Controlling the display of toolbars is carried out at an intuitive level. To do this, just uncheck or check the box next to the desired panel and click the button Apply.