Installation of double doors in the bathroom and toilet. Bathroom door: features and installation technology. Necessary tools and materials

Decided to make repairs yourself? You will find our article useful, which will tell you how to install the door to the bathroom and bathroom.

The service life and usability of the door depends on its material. When making a decision, you should be guided by such important factors as:

• the size and layout of the room;
• intensity of use of the premises;
• the presence of an exhaust system and its performance.

bathroom door

If the entrance to the room is located so that water drops constantly fall on the canvas, and the ventilation is intermittent, the room is small and more than one person uses it, then do not choose a natural wood product. It is better to stay on a product made of PVC or frosted glass. But if the bathroom boasts a large area, it has a shower or a corner bath with a partition, the hood works without interruption, you can safely buy a solid wood door. However, in this case, the door leaf should definitely be covered with an antiseptic and varnish. . Exactly the same recommendations should be followed when choosing a door leaf for the toilet.

When choosing doors, do not forget about the color scheme. So, there is one important rule that all designers use: if 2-3 doors open into a common corridor, then they must have a common design. Only the finish of the canvas may vary.

If you want to do the installation yourself, be sure to follow a few important rules, since the installation of the door leaf in the bathroom has some features. If you decide to stop at the compartment doors, while next to the bathroom there is an entrance to another room, then it is advisable to call specialists for measurement. If you do the work yourself, this may lead to improper installation, which will cause difficulties with the operation of the door in the future.

When choosing and installing doors to the toilet and bath, ventilation must be provided. There are several options here:

• you can either buy a door with a narrow grate at the bottom of the canvas;
• or you need to install the door in such a way that there is a narrow slit at its bottom and threshold.

Installing a toilet door

Any of these options will not affect the decorative component in any way, but it will help create conditions for extracting moist air from the room. The third secret is the selection of accessories. Handles and fasteners should be strong, preferably made of stainless steel. Do not save on fittings - it is better to purchase products from high-quality material from a well-known manufacturer. It is also important to make sure that the width of the canvas and the width of the wall in the opening coincide with each other.

If the door is wider than the wall, you have two options - you can either make the opening wider or shorten the door. It depends on how far you are willing to go when installing the door, since expanding the opening will require you to make serious efforts and carry out an almost complete repair. The most important rule is that the threshold of the door in the bathroom must be at least 5 cm. This is necessary so that in case of flooding of the toilet or bathroom, it does not touch other rooms.

The installation of the door begins with the dismantling of the old canvas. For this you need:

• remove the door leaf;
• make several transverse cuts in the structure;
• break out parts of the door frame using a crowbar or chisel;
• break the top of the box.

Also, do not forget to check if the wall where the platbands will be installed is even. If the surface is uneven, this area should be leveled. After that, you can put the box, fixing it with wooden wedges, which will protect the product from deflection when it is fixed with screws. The verticality of the installation should be checked using the building level.

Door frame installation

Next, we fix the box with screws and anchors, for which you need to pre-drill 6-8 holes on each side on the door block. We insert dowels into the holes obtained and fix the product, for convenience, using a screwdriver. The free space between the structure and the walls should be filled (remove the remains with a sharp knife). At the same time, there are several recommendations, following which will make the fixation with foam even more reliable.

• Foam the day before installation should be put in a warm place. If you forget about it, the foam may not set well and will lie unevenly.
• Lubricate the opening with a damp cloth, which will improve the adhesion of the material with foam.
• Shake the foam thoroughly before use.

After that, you can begin to install the hinges. We attach the loops to the end and mark their location with a pencil, then cut out the recesses for the loops. Having screwed the hinges, we install the handle and the canvas in the box. The last step remains - we put the door on the installed hinges and fasten the structure with self-tapping screws.

Installation of door structures in sanitary facilities has some features. They must be taken into account by home craftsmen who decide to perform such installation work on their own.

Doors to the bathroom and toilet - choose the right one

Door products for sanitary facilities are operated in conditions of high humidity. Their choice is based on this fact. We need to purchase a design that will have sufficient resistance to water and hot steam. In addition, it is desirable to select doors with good sound and thermal insulation.

These requirements are met by products made of the following materials:

• Plastic. PVC doors do not deform under the influence of moisture, have an affordable cost, provide the proper level of noise and heat insulation, and are available in various designs. It is easy for consumers to choose a design for a bathroom or a bathroom with any decorative features.
• Glass. Ideal material for doors to sanitary rooms. Such designs are environmentally friendly, durable. Now they are made of high-strength glass, which eliminates the risk of breaking the door. Visually, these products look great.
• Wood. Wooden doors are a classic loved by many. But experts do not advise installing such structures in toilets and bathrooms. The tree is prone to destruction and deformation during temperature changes and high humidity. It is allowed to mount doors with special impregnation in the sanitary premises, which are additionally covered with several layers of antiseptic and varnish. This, of course, increases the cost of products.
• MDF, chipboard. Fibreboard and particle boards are an alternative to natural wood doors. Their price is minimal, and the appearance is quite attractive. True, the durability of structures made of MDF and chipboard leaves much to be desired.

Having chosen the required type of product according to the material, select its specific model, focusing on the dimensions of the doorway. You will need to measure the length, width and depth of the latter in advance. Based on the available dimensions, select the door leaf. Do not forget that in addition to it, you also need to purchase a door frame. In most cases, it is not included in the door kit and is made in the form of three separate elements (plates). One of them is cut during installation into two halves corresponding to the width of the doorway. And the two remaining plates are cut along the height of the latter.

We install the box - there will be no difficulties!

Do-it-yourself installation of the door frame is carried out according to an understandable scheme. First, we cut off the side racks to the required height.

Important point! The height of these elements should be 5 mm larger than the dimensions of the opening. This is due to the fact that the doors to the bathroom must be mounted with a mandatory gap between the canvas and the frame. Let's explain with an example. If the height of the loot is 2000 mm (standard size), the size of the racks is taken as 2005 mm.

1. 1. Cut off the bottom and top of the loot by 600 mm, taking into account the thickness of the box profile, multiplied by two. Don't forget to leave 5mm gaps!
2. 2. We cut the profile (we perform a cross cut) to the thickness of the loot. Nuance. Measurements should be made on the widest area.
3. 3. Remove unnecessary sections of the profile along the bottom of the box. This part serves as a vestibule for the door structure.
4. 4. At a distance of 0.2–0.25 m from the edges of the door, we cut in canopies. They can be placed on the right or left side. Instead of canopies, hinges are allowed. They don't need to be cut. Therefore, the pros advise self-taught masters to use loops.

The box is ready. We only need to assemble it into one design. This operation is more convenient to perform on a flat surface, such as the floor. And then mount the assembled product in the place intended for it.

Preparing and installing the door - step by step guide

It is required to cut the latches into the door leaf and install the handle. We take a drill, make a hole on the end side of the door structure. Its depth should correspond to the length of the latch that we will put in the door. Then we make a hole for the pen with a pen drill. Important! The operation is performed on both sides with the obligatory determination of alignment alignment. We put the latch, fix it with self-tapping screws. Then we mount the handles:

• we insert one of them into the square, fasten it with a small screw (it comes with the kit);
• we thread the mounting element into the prepared connector, fix the latter on the door leaf;
• we put the second handle on the back side of the square.

Now the installation of well-prepared doors to the bathroom and toilet will not take much time. We mount the box in the opening, blow out all the existing gaps with mounting foam. The procedure will provide the required tightness of the structure, its high heat and sound insulation characteristics. After blowing, you need to put 2-4 wooden spacers in the opening and wait 8-10 hours. The mounting material we used will expand.

You must wait until the foam is completely dry.

Then during operation there will be no problems with closing and opening the door. We just have to hang the canvas. This is a matter of one minute.

Last tip. If you want the toilet or bathroom to have a normal microclimate, you need to cut a ventilation grille into the door leaf. Such a device costs a penny, and there are many benefits from it. The grate will ensure the flow of fresh air into the sanitary room and its high-quality ventilation. Due to this, the bathroom finish will retain its original appearance for a long time, and the door itself will be used for a really long time.

And the toilet requires special care and responsibility. There are two main rules that should be considered before you begin to decide on the installation of a door in the bathroom. First, at the bottom, between the floor and the door to the bathroom, there must be a gap for sufficient ventilation. Secondly, in these premises it is necessary to equip the threshold, which would prevent the outflow of water in the event of a flood.

Doors in the bathroom should have a gap for ventilation of the room.

Door selection

First you need to decide on the choice of the door to the bathroom and toilet. To do this, measure the width and height of the door frame. The height of all interior doors is standard - 2050 mm, and the width is as follows: 600 mm, 700 mm, 800 mm or 900 mm.

Door material plays an important role:

• glass;
• plastic with a moisture-proof film;
• wood coated with varnish or paint;
• chipboard and MDF laminated on top.

Glass is resistant to deformation, moisture and high temperature, it is an environmentally friendly material that does not transmit sound and retains heat.

Glass is the most suitable material for a bathroom door. This material is resistant to deformation, water and high temperature. In addition, glass is an environmentally friendly material, does not transmit sound and retains heat well in the room.

Glass for doors can be frosted, tinted, embossed, mirrored, decorated with plastic or metal inserts. Glass doors have gained great popularity due not only to their excellent characteristics, but also to their fashionable design.

PVC doors are not exposed to chemical attack, fire, deformation under high temperatures, and are also well resistant to high humidity. Plastic retains heat well and has excellent sound insulation. PVC doors are quite diverse in shape and color. Special surface coatings imitate various materials: wood, marble, glass. In terms of its merits, plastic is slightly inferior to glass, and the low price makes them affordable for a wide range of consumers.

Wooden doors are the most expensive and reliable option. But this classic design absorbs water very easily, which is not suitable for a bathroom.

Chipboard and MDF doors are the most popular option for modern renovations. These structures withstand high humidity well, do not deform and have a low cost. But for the bathroom, it is still better to choose plastic or glass doors.

If the door to the bathroom is located close to the doors of the kitchen or another room, then it is better to install sliding doors. Such a design will be convenient to use and interesting.

To install doors, you need tools and materials such as:

• perforator;
• screwdriver;
• hacksaw;
• miter box;
• chisel;
• building level;
• mounting knife;
• pen drill;
• self-tapping screws;
• mounting foam;
• colored and transparent silicone;
• wooden and plastic substrates;
• carnations for cash.

Back to index

Installation

The door installation process consists of the following steps:

1. Box assembly.
2. Installing the box in the doorway.
3. Fixing the door leaf.
4. Foaming the box.
5. Insertion of handles and locks.
6. Platband installation

First you need to assemble the entire structure on a horizontal surface in order to avoid further distortions and irregularities.

The assembly process includes the following steps:

1. Lay out the components of the door frame on the floor.
2. Make the required dimensions of the box in terms of the width and height of the opening.
3. Make a marking under the canopies and fix them. To do this, you need to cut grooves on the box and the door with a chisel.
4. Assemble the box by fastening all the parts with self-tapping screws.
5. Install the box in the doorway. Plastic wedges are used to fix the box in the opening.
6. Check the evenness of the structure using a plumb or level and make adjustments.

When the box is correctly assembled and installed, the main task is completed!

Now you can hang a door on it. Wedges are inserted into the gap between the door and the box so that the box is well wedged from the inside. Now you need to securely fix the box in the doorway. To do this, use mounting foam, the cylinder of which is equipped with a gun. This solution will evenly fill all the voids between the surfaces.

Before use, the mounting foam must be put in a warm place for 24 hours, but the mixture should not reach a temperature above 30 ° C. It is advisable to moisten the mating surfaces with water so that the foam grabs well. The adhesive composition is thoroughly shaken in a cylinder and applied to the joints. The adhesive mixture should be blown in a thin layer, as it increases in size when solidified. The treated opening should be left to dry for a day.

The next day, you can safely open the doors and start inserting handles and latches. The process should be done like this:

After installing the door, the handle and lock are installed.

1. Mark the place of the future mechanism.
2. Make the hole using a drill bit of the correct size, usually 16 or 18.
3. To install the lock on the end of the door leaf, use a chisel to make a groove.
4. Drill a hole for the handle on the front side.
5. Insert the handle mechanism with a latch into the holes formed and fix it with self-tapping screws.

Platbands are installed with self-tapping screws around the perimeter of the door frame. All joints are treated with silicone. At the end, the finished structure can be varnished or painted.

Despite the apparent simplicity, the installation of doors to the bathroom and toilet requires the master to have special skills and understand the principles of operation of the entire structure.

Many homeowners install bathroom doors with their own hands. This not only allows them to save money, but also makes it possible to do everything in accordance with the standards, ensuring the high quality of the work performed.

Having decided to do everything with his own hands, the master chooses the option:

• purchase of a ready-made door block;
• purchase of materials and subsequent manufacture of the product.

In order to independently process blanks and assemble the structure as a whole from parts, you need not only experience in carpentry work, but also a workshop with equipment. Most residents of apartment buildings do not have utility rooms or access to special equipment. Therefore, experts recommend buying a ready-made entrance group.

Thanks to this, installing a door to the bathroom will become a simple and easily solved task.

Experts pay attention to the fact that the design must meet a number of mandatory requirements:

1. be resistant to moisture;
2. do not miss odors;
3. aesthetically match the design of the room.

Going in search of a replacement for existing doors, the owners of the apartment must decide in advance on the type of opening: hinged or sliding.

In a small apartment, the most successful solution would be plastic sliding structures. And where the area allows you not to save on space, you can install traditional swing doors.

Selection and purchase of materials

Today, manufacturers offer a large selection of types and models of interior groups. For their manufacture, materials such as:

• wood;
• plastic;
• metal;
• glass.

For metal doors, aluminum and alloys based on it are used. They are light, not subject to corrosion, do not require special care. Metal-plastic options with a double-glazed window are popular.

Wood for products of this kind is prepared and treated with special compounds. They prevent the penetration of moisture into the structure of the material, do not allow the tree to swell and deform.

From plastic, polystyrene, acrylic, and other varieties are chosen, including combined combinations.

According to the type of construction, doors can be solid (with a solid leaf) and with window openings. The presence of openings serves as an additional source of light, which makes it possible to save energy by not turning on the lamps every time you visit the bathroom and toilet room.

Understanding what material the construction will be made of, it is easier to calculate how to install the door to the bathroom. Wooden parts require one set of tools, metal parts another.

Experienced craftsmen advise buying a finished structure and fasteners in one place. Thanks to this, all the elements will match, you will not have to redo anything or adapt existing fasteners.

Dismantling

Before the installation of doors to the bathroom begins, it is necessary to carefully remove the old structure. Previously, handles and locks are removed from the sashes so that they do not interfere with work. The process consists of three steps:

1. dismantling the canvas;
2. cash withdrawals;
3. dismantling the box.

To perform the first operation, you can use any lever, even the handle of a hammer. Slipping it under the lower edge of the door, they lift it, removing it from the hinges. It is advisable to have an assistant who will hold the canvas.

If the hinges are one-piece, then you need to unscrew the clamps from the jamb (self-tapping screws, bolts, screws) and remove the sash.

Then trims are carefully separated from the door frame in the bathroom. If they are fastened with self-tapping screws, then the parts are unscrewed with an appropriate screwdriver or screwdriver. Nailed nails are carefully pry off with a nail puller and removed.

It is important not to damage the walls, as a frame of a different design will be attached to them.

Training

After removing the old structure, the replacement of doors in the bathroom and toilet begins. For quality work, you need to stock up on all the necessary tools. If the process involves dismantling the walls, you need to prepare a mixture for sealing holes and crevices.

Replacing a door is a laborious task, so it is recommended to invite one or two assistants. The number of participants in the operation depends on the material from which the canvas is made. Two people can handle light plastic. And it is better to mount the structure made of a solid wood array by the three of us, insuring each other.

If a power tool is used during work, carrying is necessary, the length of which will ensure comfortable work.

You should also pay attention to the quality of lighting. It is often dark in the vestibule where the entrance to the bathroom is located. Therefore, you will need a good directional light source, the position of which can be changed at different stages of work.

Medical supplies in case of injury will also be useful: a bandage, iodine or brilliant green, hydrogen peroxide and a band-aid.

Necessary materials and tools

In order to independently install the door to the bathroom, the master will need a set of tools:

• hammer simple and with a rubber head;
• pliers;
• universal screwdriver with a set of nibs;
• screwdriver;
• chisel;
• hacksaw (for wood or metal);
• construction knife.

To measure and align the structure, you will need:

1. roulette;
2. level;
3. plumb;
4. simple pencil.

It is better not to use a marker, it is difficult to remove it.

To change the doors at the bathroom, the master also needs mounting foam, a ready-made mortar and a silicone sealant. Rubber inserts are also useful, with which you can provide waterproofing of the room. To align the structure, plastic or wooden wedges are needed. It is recommended to prepare enough fasteners, screws and anchors. It is better to buy them with a margin.

Preparing the opening of the box and canvas

The installation of toilet and bathroom doors begins with cleaning and leveling the sections of the wall to which the frame is attached. Its dimensions are selected according to the dimensions of the opening, so it is important not to damage anything when dismantling the old structure.

Preparing a doorway involves cleaning the remnants of wallpaper, paint, and other finishing materials from the walls. If the installation is carried out after repair, then it is recommended to glue a self-adhesive paper tape (painting tape) along the edges of the finish along the opening.

Old fasteners are removed from the walls, the holes are sealed with cement. Voids are places where moisture accumulates. To prevent fungus or mold from starting in them, a layer of waterproofing tape is fixed on top of concrete or brick.

This completes the preparation for installation work. You can move on to the next phase to place the door group.

Assembly and installation

On how to properly install the door to the bathroom, you can watch a special training video, instructions with a photo. It will help you understand the entire sequence of operations, which will speed up the process and avoid common mistakes.

First you need to check all the parts of the box so that they are securely attached to each other. After all, the installation of doors in the bathroom begins with the installation of the box.

Mounting the box in the opening and fastening the canvas

If a ready-made door block is ordered, the leaf must be removed from the hinges and separated from the frame. After that, the box is inserted into the opening and its alignment begins. With the help of a level and a plumb line, correspondence is achieved with respect to the coordinate axes of the building. Fixing a given position is achieved with the help of wedges. Then the parameters are checked again horizontally and vertically. Depending on the thickness of the box profile, spaces and cracks are smeared.

After that, the doors to the bath and toilet are installed. Together with the assistant, the canvas is hung on the box. It is checked whether opening and closing is normal, whether there are distortions and whether the locks work. If necessary, the door is allowed to stand for a while so that it settles. After that, the functionality is checked again.

To avoid distortion, the door hinges should be tightly put on each other. Before fastening inside, they are lubricated with plastic waterproof lubricants (solidol, graphite grease), which will ensure long-term operation.

How to install wood and glass doors

The process has a number of features related to the weight of the structure and safety measures. The frame is given some time to stand, and the sealant (mounting foam) hardens. Only after that the canvas is hung in the toilet and bathroom.

The glass door to the bathroom, despite the fact that it is made of impact-resistant glass, needs protection. Therefore, it must be kept aside while the box is being assembled. It is advisable to cover the plane from bumps and scratches with cardboard.

It is also necessary to protect the tree, which is problematic to restore.

Do it yourself

Having an idea of ​​​​the sequence of processes, the master knows how to install the door to the bathroom with his own hands, almost everything. The main thing is to stock up on the right tool and the required number of fasteners.

To firmly fix the frame, holes are first drilled in it. Putting it in the opening, mark the places for holes in the wall. The box is taken out and holes are made into which plastic plugs are inserted. Then the operation is repeated, screws or anchors are screwed in to securely fasten the doors to the bathroom.

After checking the performance of the structure, they proceed to the fittings. You can put the handle on a protruding square, which will protect the technological holes in the material from moisture.

Foaming technology

At the fixing stage, the bathroom block is processed with mounting foam. This is necessary to fill all possible voids and reliably isolate the room from moisture.

The polymer mass is applied along the height of the door, starting from the bottom and moving up. It is recommended to fill the voids by a third of the volume. The rest of the foam will fill itself, gradually expanding. And the master will have to mess around less, cutting off the frozen excess.

Experts note that bathroom doors should be hung only after the foam has completely dried. It lasts up to 10 hours, depending on the composition. The manufacturer reports the curing time on the packaging with foam.

Only after that are the platbands or decorative panels attached, completing the process of installing the interior group.

Do-it-yourself installation of doors to the bathroom and toilet does not require additional experience in construction from a person. In order for the installation to be successful, and the design to please the owner with durability, it is necessary to follow the procedure, prepare consumable materials and tools in advance.

Before you put the door to the bathroom with your own hands, you need to plan the work in stages, prepare the tools, choose a door with a box and buy it.

It is important to remember that the toilet and bathroom are rooms with a high level of humidity. Choose the material and the opening mechanism, you need to take into account this feature. Ideal options in terms of materials for the manufacture of canvas are plastic, glass and wood. But wood fibers are destroyed by prolonged exposure to moisture. Because of this, it is required to choose a canvas with a protective film (lamination). Veneered models are also suitable.

You can install the door to the bathroom with your own hands with different opening mechanisms. The most popular options are sliding and swing structures (for joint and separate bathrooms).

Important! Fittings installed on the canvas must have a coating that protects against moisture. Otherwise, the mechanism will rust and fail.

Required Tools

Before you start dismantling the old canvas, prepare the doorway and install a new box with a door, you should think about what tools you will need to carry out the work and prepare them. Sample list:

1. Hammer, mount, sledgehammer, pliers, hacksaw for wood and metal.
2. Construction level, plumb line, pencil, tape measure 3 meters.
3. Screwdriver, puncher, large grinder (when expanding the opening).

Consumables include plastic, wood and metal substrates, fasteners (anchor bolts, self-tapping screws, polyurethane foam, nails for platbands) and equipment for power tools (diamond blades for a grinder, drills, drills, bits).

Dismantling the old canvas

Before installing a new canvas with a box, you need to remove the old structure. This requires proper dismantling so as not to damage the doorway. You need to prepare a chisel, an ax, a hammer, pliers, a mount, a hacksaw for wood (you can use a hand circular saw or a chainsaw).

Procedure:

1. We need to remove the old structure. To do this, open the door. Insert a mount under its base so that you get a lever. Press on the other end of the tool. If the belt does not rise, the hinges must be lubricated with engine oil or WD-40. If the opening mechanism is attached to bolts or self-tapping screws, it is enough to unscrew them to remove the canvas.
2. It is required to dismantle the platbands, extensions and the box. Platbands and extensions are removed with an ax, chisel, pliers, hammer. It is enough to pick up one edge of the wooden plank and tear it off the box. Wooden architraves are best replaced, not reused.
3. You need to start disassembling the box by removing the fasteners, if any (bolts, self-tapping screws). The box is cut with a wood saw, chainsaw or hand circular saw in the middle along the right or left slope. With the help of a mount, the box is carefully torn off the wall around the perimeter.

Plastic platbands are fixed to the wall with silicone or sealant. They need to be cut off with a sharp knife, and the remnants of the adhesive must be cleaned off the wall with sandpaper or a blade.

Preparing the doorway

Before starting the main installation work, it is required to prepare a doorway. To do this, the working surfaces are checked by a level and a tape measure. If there are differences in size, depressions or bumps, they need to be leveled. At the stage of preparing the doorway, you can change its width.

Important! When expanding the opening, you need to use a large grinder. Builders recommend not to use percussion power tools (jackhammer, perforator). It creates a powerful vibration that can destroy a wall.

After determining the dimensions of the opening and leveling the working surfaces, it is required to apply waterproofing. It will protect the box from the destructive effects of moisture and will not allow the fungus to develop. For this, a waterproofing tape is used, which has a self-adhesive side. It must be glued around the perimeter of the opening.

Door frame installation

When the waterproofing is applied, the surfaces are leveled, the opening is prepared, the installation of the box can begin. The sequence of actions will depend on the material. When installing a plastic box, it is enough to level the finished structure, put plastic gaskets. It is necessary to fix it on anchor bolts to the walls and foam the empty space between the wall and the box. It is important not to forget about the direction of opening the canvas, so as not to do unnecessary work.

The wooden box is measured initially. After that, its height and width are reduced in such a way that a technological gap remains between the box and the wall. Also, do not forget about the ventilation hole, which should be located between the door leaf and the threshold. A rail is stuffed along the contour of the opening or a profile is fixed. This is the base on which you need to fix the box. To do this, use anchor bolts and mounting foam.

Door leaf installation

The canvas that separates the bathroom or bathroom from other rooms is installed in different ways. Installation features depend on the type of opening mechanism.

Swing models are equipped with loops that are fixed on the canvas and the box with self-tapping screws.

With plastic models, the situation is identical. The door is put on hinges. Metal elements are closed with plastic caps (in PVC models).

Installation of platbands

Platbands are decorative wooden, metal or plastic strips that should cover the junction of the wall and the box. You can fix them on the box with finishing nails. At the stage of exterior finishing, you need to carefully nail the trim to the box so that the bare wall and foamed areas are covered.

Door foaming technology: step by step instructions

To improve thermal insulation and better fixation in the passage, it is required to foam the empty space between the box and the entrance. The composition is applied as follows:

1. Before applying the foam, it is necessary to moisten the work surface. In this way, a better bond between the two materials can be achieved.
2. Before opening the can and applying the foam, you need to shake the container.
3. After filling the free spaces, you need to wait for the mounting foam to dry. Wait 3-4 hours.

Advice! Builders recommend leaving the foam to dry for 24 hours before further work.

Features of the operation of doors in the bathroom

During the installation and subsequent operation of the door unit, you need to know the features that will help increase the durability of the structure and help avoid various problems:

1. A ventilation hole is required (between the floor and the canvas). Size - 10 cm wide and 5 mm high.
2. The bathroom should have good air circulation. It will help to avoid the formation of fungus and mold, preserve the appearance of decorative coatings and increase the durability of building materials.
3. If the bathroom or bathroom is small, lamination is required. The natural wood coating will not withstand prolonged exposure to moisture and will quickly collapse.
4. Builders recommend installing compartment doors if the bathroom or toilet is located next to the kitchen or in a narrow corridor. This way you can save space.
5. To increase the life of the structure, you need to purchase high-quality fittings. Complex mechanisms (folding and sliding) need to be lubricated with engine oil once a month. Rusted places are treated with WD-40.

Additionally, a rubber seal can be installed around the perimeter of the door. It will improve sound insulation. It is necessary to leave a ventilation hole under the door leaf.

You can install the doors to the bathroom or bathroom without the help of finishers. It is important to follow the sequence of actions, carefully choose the design of the opening mechanism, the materials from which the canvas is made, and the tools.