The Medved KLOM series is designed for systems with closed coolant circulation. These are floor-standing cast-iron gas boilers with a capacity of 19 to 49 kW for heating and hot water preparation in an external boiler. Are established in houses, country houses and production rooms. The main advantage is that the boilers are non-volatile, they do not require connection to the electrical network. The design is simple and considered one of the safest, and displaying the temperature of the coolant and the pressure of the coolant in the system allows you to control the operation of the boiler. It is possible to install a forced fan for more efficient removal of exhaust gases and an outdoor temperature sensor, since the design provides for the possibility of weather-compensated regulation.
The boiler is easy to use due to electric ignition, built-in microprocessor, available control modes. When connecting room regulators, the boiler control system allows you to maintain a comfortable microclimate in the premises.
Features of the KLOM Bear series
- Gas boilers.
- For systems with closed coolant circulation.
- Cast iron two-way heat exchanger.
- Open combustion chamber.
- Possibility of preparation of hot water in an additional accumulative boiler.
- The number of heat exchanger sections is from 4 to 8.
- 4 power modifications from 19 to 49 kW.
- Efficiency 90-92%.
- Atmospheric stainless steel burner.
- Smooth regulation of boiler power.
- Electric ignition.
- Boiler control by built-in microprocessor.
- Control mode "WINTER-SUMMER".
- Indication of the pressure of the coolant in the heating system.
- Heat carrier temperature indication.
- Ability to work with weather-dependent automation.
- Protection of the cast-iron heat exchanger from condensate.
- Chimney draft control.
- Overheat protection.
- Flame control.
- Possibility of installing a fan for forced removal of flue gases.
- Cooling circuit (prevents the temperature of the heat carrier in the boiler from rising above 110°C).
- Resistant to complex hydraulic conditions.
- Delivery of the boiler already assembled.
- Possibility to replace middle cast iron sections.
- Easy to install, care and maintain.
- Possibility of work on the main and liquefied gas.
Description
Protherm Medved 30 KLOM is a floor standing gas boiler designed for heating and domestic hot water. This model successfully combines high performance, exceptional technical characteristics, stylish design and extremely simple operation. The boiler will ideally fit into any interior, suitable for use in apartments, cottages, country houses.
Features of the boiler Protherm Bear 30 KLOM
This model is easy to install and use. The compact dimensions allow you to place the boiler in almost any convenient place; if hot water is needed, an external storage boiler Protherm can be connected to it. The design is distinguished by thoughtfulness and exceptional reliability: a cast-iron two-way heat exchanger, an atmospheric stainless steel burner, readiness for complex hydraulic conditions guarantee long-term operation of the Protherm Medved 30 KLOM boiler.
Protherm Bear gas boiler configurations have the following differences:
- the TLO series - for systems of heating with natural circulation of the heat carrier. The simplest models with power from 18 to 48 kW;
- PLO series - for heating systems with closed coolant circulation. Models with a modernized design and piezo ignition with power from 18 to 48 kW;
- KLOM series - models with electric ignition and forced exhaust gas removal system, power from 19 to 49 kW;
- KLZ series - models with a built-in 90 l boiler, power from 18 to 49 kW;
If necessary, you can choose any other configuration of the Protherm floor standing gas boiler.
Control over all the working processes of the Protherm Medved 30 KLOM boiler is carried out by means of special indicators that display the temperature and pressure of the coolant. The unit can operate on both main and liquefied gas from a cylinder.
Also, Protherm Medved 30 KLOM has a high level of safety: the boiler has overheating protection systems, protection of the cast-iron heat exchanger from condensate, the cooling circuit prevents the temperature of the coolant in the boiler from rising above 110C.
Technical description Protherm Bear 30 KLOM
- Efficiency 90-92%;
- from 4 to 8 sections of the heat exchanger;
- electric ignition, control of all work processes using a microprocessor;
- single-stage regulation of boiler power;
- chimney draft control;
- control modes "WINTER-SUMMER".
You can find out more information about this model, as well as buy a floor-standing gas boiler Protherm Medved 30 KLOM with the possibility of delivery to any region on our website or from the sales staff. If necessary, our specialists are ready to perform a full list of works on
You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having placed an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of prompt delivery and receive products today.
Delivery to the entrance (check with the manager about the possibility of raising to the floor)
Delivery is made daily from 9 am to 9 pm including weekends and holidays.
Specify exact terms of delivery at the manager!
Pickup points
Delivery cost in Moscow and the Moscow region:
- Within the Moscow Ring Road - from 0 to 500 rubles, (Individual shipping cost is indicated in the product card)
- Outside the Moscow Ring Road up to 10 km - 700 rubles,
- Outside the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
- In the regions, delivery by a transport company (calculated individually).
Shipping cost for
km from MKAD
700 rub.
Unloading of bulky goods is carried out by the forces and means of the customer.
Money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and ease of calculation.
Payment by bank card to the courier upon receipt
Couriers have a portable bank terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).
Payment by credit card on the site
To select payment by bank card on the "Cart" page, select the item "Payment by bank card on the site".
Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:
After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.
Please prepare your plastic card in advance. Additionally, you need to enter the full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.
If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making Internet payments at the bank that issued the card.
This site supports 256-bit encryption. The confidentiality of the reported personal information is provided by Sberbank of Russia OJSC. The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.
When paying by credit card, interest is not charged.
Payment is a transfer of funds from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after the receipt of funds to the account of the company "Teplovod-Service". This method is used in the calculations of legal entities.
Our details
Limited Liability Company "Teplovod-Service"
OGRN: 1105003006162
TIN: 5003088884
Checkpoint: 500301001
BIC: 044525225
Bank: PJSC Sberbank of Russia
R/s: 40702810838060011732
K/s: 30101810400000000225
Jur. address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoye highway, 21 km., office B-6
Special conditions
- For any goods sent by a transport company, 100% payment is required.
For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.
For goods with the status "On order" over 100,000 rubles. a 30% deposit is required.
Reviews about the product «Floor standing boiler Protherm Bear 30 KLOM 26 kW»
There are no reviews for this product yet. Your review will be the first!
Please note that the manufacturer's warranty is valid only if the installation and commissioning were carried out by an employee of a specialized organization certified by the Protherm factory. At the same time, the presence of a Protherm certificate does not exclude the need for additional certification of the personnel of a specialized organization in accordance with the laws and regulations in force on the territory of the Russian Federation relating to the scope of activity of this organization.
The fulfillment of the warranty obligations stipulated by the current legislation in the region where the Protherm equipment was installed is carried out by the seller of your device or an organization associated with it, authorized by a special agreement to perform warranty and non-warranty repairs of Protherm products. Repairs may also be carried out by an authorized Protherm service center.
The company that performs warranty or non-warranty repairs of Protherm equipment during the warranty period will eliminate free of charge all the defects identified by it that have arisen through the fault of the manufacturer. The specific conditions of the warranty and the duration of the warranty period are established and documented at the time of sale and commissioning of the machine. Pay attention to the need to fill in the "Sales Information" section, which contains the serial number of the device, sales marks and corresponding seals, sales dates and seller's signatures in the warranty cards located on the back of the product passport.
The manufacturer's warranty does not apply to products whose malfunctions are caused by transport damage, violation of the rules of transportation and storage, the use of non-freezing coolants, contamination of any kind, including hardness salts, water freezing, unqualified installation and / or commissioning, non-compliance with the instructions for installation and operation of the equipment and accessories to it and other reasons beyond the control of the manufacturer, as well as work on the installation and maintenance of the device.
The established service life is calculated from the moment of commissioning and is specified in the documentation attached to a specific product.
The Protherm factory guarantees the availability of any spare parts for this product for a minimum of 8 years after it has been discontinued.
For Protherm equipment and accessories, the manufacturer sets a warranty period of 2 years from the date of commissioning, but not more than 2.5 years from the date of sale to the end user.
Spare parts are warranted for 6 months from retail date when spare parts are installed by a Protherm certified technician.
In case of partial or complete absence of information about the sale and / or commissioning, documented, the warranty period is calculated from the date of manufacture of the device. The serial number of the product contains information about the date of issue: numbers 3 and 4 - the year of manufacture, numbers 5 and 6 - the week of the year of manufacture.
An organization that is an authorized Protherm service center has the right to refuse the end user warranty repair of equipment commissioned by a third party if the authorized service center specialist finds the above reasons that exclude the manufacturer's warranty.
