Do-it-yourself metal workbench: drawings. How to assemble a carpentry workbench with your own hands Collapsible workbench with your own hands

Home craftsmen who saw off wooden blanks on a stool sooner or later come to the need to make their own workbench for carpentry. When performing simple tasks, you can get by with a universal desktop and a couple of three good clamps.

If you are serious about carpentry, you need the appropriate equipment. It does not matter if you are doing custom-made products, or doing something for the home. A homemade carpentry workbench will allow you to make any product at a high technical level, and save you a lot of time.

IMPORTANT! When discussing this question, it is assumed that you have free space for work. Ideally, a separate room in the form of a workshop. As a last resort - a high-quality canopy in the yard.

If you are going to do carpentry in an apartment, or on a spacious loggia, the only way out is to purchase a folding metal workbench. Of course, it will not be possible to process dimensional wooden blanks on it, but the quality of work and convenience will increase by an order of magnitude.

The main task of such a device is to securely fix the workpiece of any shape on a flat tabletop. Instead of a carpentry vice, a system of sliding halves of the working plane is used.

Fixation of the product is carried out with the help of adjustable stops. There are holes in the table for their installation. The well-thought-out design allows you to fix even a round workpiece.

The presence of a longitudinal groove in the tabletop (moreover, with an adjustable width) allows you to cut flat products without leaning on the edge, which requires the presence of an assistant holding the free side. Sawing can be done in the middle, using an electric jigsaw, controlling both halves of the workpiece.

Such tables can be supplemented with an electric planer, circular saw or milling machine, which expands the possibilities.

A similar folding workbench can be made from wood. True, stability will not be the same as that of a stationary product.

And yet, full-fledged carpentry work on such devices cannot be performed. Firstly, the apartment is not too adapted for this. Secondly, the dimensions of folding workbenches limit the dimensions of the processed products.

Therefore, most craftsmen who are responsible for their work will prefer a home-made carpentry workbench of full size to a store universal table.

In addition, the finished machine does not provide for the individual characteristics of the master:

• Height, arm length;
• Is the master left-handed or right-handed;
• Preferences in processed products - the tabletop can be square or rectangular;
• Features of the room or platform for using the workbench.

How to make a universal carpentry workbench with your own hands

Before looking for a project or drawing up a workbench of your own design, you need to understand how the system works. I would like to have at once a platform for cutting large workpieces, and a milling cutter, and a drilling machine.

IMPORTANT! Any versatility degrades the specialized capabilities of the product. Some devices are still better used as separate devices.

Carpenter's workbench device

There are a great many designs, but the main components must be present.

If you like to work with your hands, then a workbench will come in handy. From metal, such a design can be made independently. It will consist of a countertop, which is fixed on a metal frame.

Design features of the product

A metal workbench can be carpentry or metalwork. The first variety is quite simple to manufacture, but on the surface of the tabletop it will be possible to work exclusively with wooden parts. This version of the product assumes the presence of a cover made of wood or treated with linoleum. If you try to work with metal workpiece on a carpentry workbench, the coating will absorb oils, and metal chips will damage the surface. Joiner's workbenches are made of wood, therefore they are not as stable as compared to metal ones.

Locksmith structures are most often used in the garage. With the help of such equipment, you can work with metal blanks. Such a piece of furniture in the workshop is universal. It is important to determine before starting work whether the countertop will be single or multiple.

A metal workbench will include a bench, a lid, and a table. The penultimate element should be endowed with three-layer sides. Metal structures are made using MDF or a thick plywood sheet, which is additionally covered with a metal sheet. It is important to exclude the presence of sharp corners that may be at the countertop, which will prevent injury. It is important to provide the table with drawers that will be needed to store inventory. It is necessary to equip these components with guides that will prevent accidental falls. If there is a need to protect the wall near which the table will be installed, you can install a special screen on it.

The legs should have a large surface area as well as excellent strength. They are additionally reinforced with each other at the bottom. It is recommended to place a shelf for varnishes, large tools, and accessories at the interface points. Most often, steel workbenches are equipped with two discs that have stoppers. The presence of the clamping screw is important.

Preparation before starting work

A metal workbench can have completely different dimensions, however, the width of 60 cm can be used as the most optimal. While the length can be equivalent to 1.5 meters. The frame is recommended to be made from a profile pipe or sockets and light sources should be located near the table. For cutting metal, it is best to use a grinder. Prepare metal corners, the thickness of which is 3 cm. Their size should be 40 x 40 mm. Steel profiles with a cross section of 30 x 50 millimeters are also suitable. You will need a metal strip to secure the desktop to the frame.

When a metal workbench is made, the worktop is usually made of dry boards, the thickness of which is 50 millimeters, while the width of this element can vary from 100 to 150 millimeters. In the process of work, you will need galvanized metal with a thickness of 2 millimeters. Strips of the same material will be needed to form the sides, which will protect against sparks. The length of one such strip should be equivalent to the length of the working surface.

Work on the manufacture of a workbench

If you decide to make metal drawings, it is recommended to prepare in advance. Parts are cut to size, and you need to connect them together by welding. If there is no need to install additional shelves, then the structure must be reinforced with stiffeners, which must be made from the same corner. They should be installed, stepping back from the floor surface 10 cm. The same distance steps down from the edge of the countertop. The same manipulation is carried out with the central part of the table. In order to provide a higher leg, square steel plates are welded on.

Features of the assembly

The drawing of a metal workbench, which is presented in the article (see photo above), will allow you to carry out the work correctly. After the main structure is assembled, you can start working on the frame. Using square steel corners with a side of 50 millimeters, you need to form a frame. Its length should be 20 cm longer than the dimensions of the structure. This is required to secure the vise. Then, in the place where the desktop will be strengthened on the main structure, steel strips should be welded, while the structure from the corners is installed on them. Among other things, it will be necessary to strengthen the protective screens.

If you decide to make a metal workbench with your own hands, in the corner that is used for rigidity, as well as in the countertop, you should drill holes to which the boards will be fixed. Most often, self-tapping screws with countersunk washers are used for this. At the next stage, the countertop can be covered with sheet metal, which is reinforced with self-tapping screws into pre-drilled holes. Shelves can be painted or treated using a fire retardant. To ensure more comfortable work, the part can be rigidly fixed. For this, a vice is used, which has parallel jaws. All processed elements can be fixed.

Finally

As you know, a metal workbench is very afraid of moisture and corrosion. In order to extend the life of the product, it is possible to process it with a special paint intended for working on metal. This will make the design even more attractive in appearance.

Any welder or turner needs a workplace where they can work with metal: processing, sharpening, cutting, grinding. For these purposes, you need a locksmith workbench. The main difference between a locksmith's workbench and a carpenter's workbench is the metal surface, while the carpenter's surface is made mainly of wood.

Main nuances

Most home craftsmen prefer not to buy a workbench, but to make it with their own hands. Firstly, a do-it-yourself metal workbench will cost much less than a purchased one. Secondly, when making a structure, it is possible to realize your ideas, and finally, if everything is done correctly, then the quality of a home-made workbench will be several times better than that of a purchased one. With some simple metal manipulation, a small amount of tools, and welding and cutting skills, you can get a pretty decent table.

When manufacturing, you should divide the workbench into components (for more convenient assembly) and take into account important nuances:

DIY workbench

First you need to decide where the workbench will be located and what you can fix it to. If the structure is angular, then the best option in this case is to start building from the walls themselves, while they must be strong.

This option is good because Design modifications can be made along the way., but if the master is inexperienced, then it is better to use another option. The optimal solution is the manufacture of a workbench according to ready-made drawings. Of course, the cost of this option is several times higher, but the dimensions and material have already been selected and indicated in the drawing, which greatly facilitates the work.

The base is made of the 35th corner with a wall thickness of 5 mm. From such material the steady design turns out. A 3 mm thick sheet is used as a working surface, there are boards 60 mm thick under the sheet, which provides even greater structural rigidity. The binding of the table can be made from a thinner corner, since the load on it is minimal, and boards can be used from 20 mm. As for the remaining shelves, plywood is used as a pallet, the thickness of which ranges from 10 to 20 mm. Drawers are made of 2 mm steel. For the manufacture of a locksmith's workbench, the dimensions are shown below.

The height and width of the vise table can be changed and adjusted to suit your needs. You will also need the following materials:

• Corner 35 mm, wall thickness not less than 5 mm.
• Corner 20 mm for the frame.
• For the support legs, it is necessary to make plates from pieces of steel sheet to fasten the workbench to the floor.
• Plywood.
• Beam 60 to 40.

After the frame is ready, it is necessary to clean the metal. Then, in order to avoid metal corrosion, the structure must be coated with a metal primer in 2 layers and then proceed to painting. Wooden elements must also be primed and, if possible, varnished. Wood treated in this way will last a long time and will not absorb moisture and rot.

Once the boards are dry, they can be laid on the finished structure. It is advisable to drill holes at the beginning and at the end of each board and attach them to the base using metal screws. The sheet, which will serve as a kind of shield from hammer blows, must be laid on the boards and fixed with bolts or self-tapping screws to the boards. On all shelves you need to lay sheets of plywood and fix them in any way. The next step is to make the boxes themselves out of sheet metal.

After the sheet of metal has been made according to the drawing, its side parts should be bent and scalded. It should look like this:

Weld a handle to pull the drawer to the front. Before installation, you need to prime and paint in the same way as the frame itself. Insert the finished boxes into the workbench.

It should be noted that this workbench does not have room for legs. This, of course, is not very convenient, but on the other hand, you can put much more tools and workpieces. You can immediately attach a vice, drilling machine and other equipment to such a workbench.

locksmith table

Those who have little space at their disposal for a workbench, an option that combines a small metalwork table with workbench elements is suitable. On such a table you can place the most necessary plumbing equipment. The design looks like this:

You can make such a table in the workshop from a corner of 60 x 60 or 70 x 70. The corners need to be welded together to make a kind of rectangle. You can put boards or plywood on the bottom of the table, but before that, you need to drill holes in the lower parts of the corner to fasten the table to the floor.

The structure should be primed and painted. If the table will stand in a dry, heated room, then to save money, you can not process the surface. For the countertop, a sheet with a thickness of 6-7 mm is required, under which boards should be laid to dampen vibration from hammer blows and work with power tools. The sheet is fastened with bolts or screws for metal.

All sizes are purely individual and are selected by the master independently.

This design is good because it takes up little space, and even a novice locksmith can make it.

This option is made from a square pipe and a corner. The frame is made of a square pipe, and the corner will give the structure the necessary rigidity and is used for edging.

Tools for making a workbench:

• Welding machine.
• Bulgarian with sharpening cutting discs.
• Squares.
• Roulette.
• Plywood, corner and square pipes.
• Screws and drawer guides.
• Self-tapping screws for metal and anchors.
• Paint for wood and metal.
• Steel sheet.

The structure must be welded in such a way that the second part of the corners can be welded onto its upper surface, in which the boards under the countertop will be located.

Now you can start making a frame from the corners for the tabletop. The corners must be cut into two parts, 2000 mm long. You will also need two corners of 750 mm. All this must be welded so that the boards under the countertop lie in the grooves of the corner.

In order to weld the crate for the tool, you will need two corners of 2000 mm and 4 corners of 950 mm each. To strengthen the frame, fix the corners 950 mm long in the middle and two on the sides. The panel can be welded to the worktop as follows:

The next step is to strengthen the structure with the help of corners. This must be done as shown in the figure:

It's time to make plywood boxes. The process itself is simple: plywood should be cut into blanks with a jigsaw, and then twisted with self-tapping screws. Drawers can be placed on both sides of the table, and their number can be from two to three. It is necessary to attach guides to the boxes, but before that, two metal strips should be attached from each side, to which the guides will be attached.

After all the components are ready, you can proceed to laying the boards on the workbench. The board must be no thinner than 50 mm and 2190 mm long. If you can’t find long boards on the farm, then you can get by with short pieces of 74 cm each. Before laying, you should treat the boards with an “anti-bark beetle” to extend their service life. The metal structure needs to be primed and painted. On top of the boards you need to fix the steel sheet.

At the very end, boxes are installed, and the tool stand is sheathed with plywood.

The last step is to ground the workbench to avoid electric shock. You can immediately attach a vise, grinder and various devices to the countertop. Optionally, it is allowed to run cables for sockets and additional lighting, which will make the work even more comfortable.

As practice has shown, the manufacture of a locksmith's workbench is a rather painstaking task that carries financial costs, but the master will receive only positive emotions from working on such a table. Work will become much easier due to the fact that all the tools will be at hand.

The garage is a multifunctional space. In it, you can install and repair cars, design and make various things and mechanisms with your own hands.

If a person likes to spend time in the garage, doing repair work, you need to properly equip your workplace. A workbench is a multifunctional desktop that can handle various materials, carry out locksmith, electromechanical and assembly work. Also in the design of the workbench, you can think of shelves and drawers to store tools and other items.

Types of workbenches

Workbenches are made for processing metal (locksmith) and wood (carpentry). The designs differ in the material of the countertops. For locksmith models, the countertop must necessarily be metal, since working with metal involves the use of engine oil and other liquids that can leave marks on a wooden surface.

Also, when processing metal parts, effort is often required, the use of a sharp tool, so it is best to equip the workbench with a metal worktop.

Carpentry workbenches are designed to work with wood, so they are not as durable and functional as locksmith models.

Workbench design

If the design of the desktop in the garage is made by hand, then first of all you need to carefully consider every detail, figure out where the tools will be placed, what work will be carried out on the workbench. The model of the table in the garage depends on this.

Standard models are often equipped with drawers, which can be made of wood or metal. Also, the design of the table can be supplemented with shelves, a power shield for hanging tools, which will always be at hand. But most importantly, the workbench must be stable, durable and reliable.

Tool

Bulgarian with a circle for cutting metal and a grinding disc.

Welding machine and electrodes. Overalls and protective devices for welding.

2. Screwdriver.

   Jigsaw for cutting plywood.

materials

Corner 50 mm by 50 mm, thickness 4 mm, length 6.4 m.

Square pipe 60 mm by 40 mm, thickness 2 mm, length 24 m.

Corner 40 mm by 40 mm, thickness 4 mm, length 6.75 m.

Steel strip 40 mm wide, 4 mm thick, 8 m long.

Steel sheet for countertop 2200 mm by 750 mm. Thickness 2 mm.

Steel sheet for making drawer holders. Thickness 2 mm.

Wooden boards for countertops. Thickness 50 mm.

Plywood for the manufacture of drawers and for the side and back walls of the table. Thickness 15mm

Guides for drawers.

Screws for assembling plywood boxes.

Self-tapping screws for metal.

Anchor bolts.

Paint for wood and metal.

The workbench, which will be made from these materials, has quite impressive dimensions: the length of the table is 220 cm, the width is 75 cm.

The first step in the manufacture of a workbench is cutting the available material into elements. The profile pipe is intended for the manufacture of the frame. The steel corner is designed to create stiffeners. It is cut into pieces and a power frame is formed from it. Also, a steel corner is needed for edging the tabletop on which the boards will be laid.

The steel strip is intended for the manufacture of guides on which the side panels will be attached. Also, this material will go to the brackets for attaching boxes and plywood.

Table drawers are made of plywood.

The second step is welding the power frame of the workbench. The elements of the countertop are welded first - 2 pipes 2200 mm long and 2 pipes 750 mm each. The frame must be welded so that another frame of corners can be welded on top of it, into which the tabletop boards will be laid. To reinforce the countertop, it is required to weld a few more steel pipes after 40 cm, which will act as stiffeners.

Then 4 side legs are welded along the edges of the workbench. Their length is 900 mm. Power jumpers are welded between the legs, strengthening the structure.

After the base frame is ready, you can start welding the structure for the boxes. To do this, square frames are formed from steel pipes, which are welded to the tabletop on both sides of the table. Frames are reinforced with longitudinal stiffeners.

The third step is to make a frame for the countertop. Two steel corners, 2200 mm long and two more corners 750 mm long, are needed to make the frame. The structure is welded so that wooden boards lie inside it.

The frame from the corner is laid on the frame of pipes and welded. It turns out a reinforced tabletop, 8 cm high with internal stiffeners.

The metal frame of the workbench is almost ready, it remains to weld the crate of the panel for attaching the tool. This requires one metal corner with a length of 2200 mm and 4 corners with a length of 950 mm. Two elements are attached to the sides of the structure and two in the middle, for reinforcement. The toolbar is welded to the worktop.

The frame of the corners and pipes is ready. You can start strengthening the structure. Brackets are welded to the sidewalls of the table, which are cut from a steel strip. A total of 24 parts are needed. A hole is drilled in the middle of each bracket. Using these holes, the side and back walls of the plywood table will be attached to the metal frame of the workbench.

The fourth stage is the manufacture of drawers for the table. Plywood is cut into blanks, which are twisted with screws. The number of drawers depends on what will be stored in the table. If the details are small, then 3 boxes can be built, if large - then 2. It all depends on personal preference.

You can place drawers on two sides of the table, you can mount pull-out structures on one half, and ordinary open shelves on the second.

After the drawers are assembled, metal strips with holes need to be welded between the sides of the drawer compartments. Slides for drawer guides will be attached to these holes on the inside.

The fifth stage is laying the boards in the tabletop frame. Boards with a thickness of 50 mm are cut into blanks of a certain length. If a long board is available, then you need three blanks 245 mm wide and 2190 mm long. If there are no long boards available, then you can lay the blanks across the table. For this purpose, wood 205 mm wide is cut into 10 blanks 740 mm long.

Before laying the wood in the table frame, it must be treated with an antiseptic solution. This will protect the material from rotting and damage by beetles.

Then it is mandatory to paint the entire metal structure of the workbench. This will protect the metal from corrosion. It is best to use a weatherproof and anti-corrosive coating option. Be especially careful when painting welding seams. Drops of metal and irregularities are recommended to be thoroughly cleaned before painting. This can be done using an angle grinder with a metal grinding disc.

After the structure is dry, you can start laying the boards on the countertop. They should not be driven too tightly into the frame. This is due to the fact that the tree tends to expand and shrink with a change in temperature and humidity. It is better to leave a small gap of a few millimeters between the boards. The surface of the wood needs to be sanded, this will make it easier to lay the metal sheet on top of the wood. Boards around the entire perimeter of the table are screwed to the frame with self-tapping screws.

The sixth stage is the fastening of the upper steel sheet. It can be welded to the countertop, but there is wood inside the structure, which can ignite during the welding process. Therefore, it is best to attach the steel sheet with hidden self-tapping screws to the wooden planks. Previously, the metal must be painted on both sides with a rust converter. This covering material looks like a transparent paint coating, is easily restored and reliably protects the metal from rust. You can also paint the metal countertop with the same paint that covered the frame. It will be beautiful, but over time, the paint may scratch and the table will not look too new.

The last step is to install the boxes on the rails and fasten the plywood to the side walls, shelves and power shield in front of the table. This work can be called the finishing of the workbench. After work with plywood is over, it must be coated with a composition that will protect the material from environmental influences. Also, do not forget about the design of the power shield for tools. You can attach special hooks or screws to it, to which the necessary things will be hung.

In order to make it convenient to work at the workbench, you can attach a special lamp with a bending stand to the power shield. In this case, you can optionally direct the flow of light to the right place.

Video - The process of making a workbench

Installing a vice on a locksmith's workbench

A vice is an indispensable attribute of a locksmith's workbench. It is not recommended to attach a clamping tool weighing several tens of kilograms to the tabletop itself. It is best to place a metal gasket between the metal of the table and the tool, 1 cm thick. It is required to drill holes for the anchor bolts in the gasket. Then, in the same places, drill holes in the countertop of the same size. The whole structure is fastened with anchor bolts.

Safety requirements for a homemade workbench design

1. If the area of ​​\u200b\u200bthe garage is not too large, then you can make a smaller table for plumbing work with your own hands. But, it is worth knowing that the whole structure must be stable, not sway or budge with little effort.
2. The workplace should be organized in such a way that nothing interferes with a person. When working with a vise, all unnecessary tools should be removed from the countertop.
3. The corners and protruding parts of the table should not be too sharp and have cutting edges.
4. After repair work behind the workbench, you need to clean the workplace from metal chips, oil drops and other materials.
5. If a homemade workbench is made correctly, then it can easily withstand a load of 200 kg.

Shield plywood

Video - Do-it-yourself workbench in the garage

The garage is a multifunctional room in which they put a car for repair or storage, construct various mechanisms with their own hands. Many jobs require a benchtop. It is represented by a fairly simple and reliable design. It is possible to assemble a workbench with your own hands, thereby reducing the cost of construction. Let us consider in more detail how to do it, what features such a design has and many other points.

Types of workbenches

The workbench is created in order to be able to manufacture or assemble various mechanisms. There are a fairly large number of different types of workbenches, each with its own specific features.

To begin with, we note that there are two types of workbench:

1. locksmith;
2. carpentry.

Joinery is represented by metal or wooden frames, and wood is used in the manufacture of countertops. A universal version of the execution is considered to be a locksmith workbench. In the manufacture of countertops in this case, metal is used that can withstand a variety of actions: turning, cutting, sawing, grinding and others. A metal workbench can be made with your own hands using a variety of materials at hand.

A wooden workbench is characterized by a relatively short service life and resistance to the load. It is quite easy to assemble such a workbench in a garage with your own hands, but the materials used are exposed to the environment, for example, high humidity or temperature changes. You can make a workbench out of wood quite quickly, the schemes are downloaded on the Internet.

Design features of the workbench

Many experts compare a workbench with a desk, since both designs are designed to carry out a wide variety of jobs. Homemade workbench can be represented by a variety of designs. The drawings define the presence of the following elements:

1. Most of the load is transferred to the supporting structure, represented by a combination of frame with legs. It is made mostly of metal.
2. The tabletop of the workbench is represented by a massive material with a large thickness, due to which the surface can withstand strong blows with a hammer. In the manufacture of used steel or wood of great thickness.
3. Cabinet. A variety of things are stored in the garage. The design of the workbench provides for the presence of bedside tables, which are placed on the sides. They can be represented by shelves or drawers. Spare parts and tools can be stored in them.
4. Additional shelf. The dimensions of the workbench can be very different. As a rule, a shelf is located in the lower part, on which various parts and large-sized mechanisms can be stored.

The height of the locksmith's workbench is selected taking into account the growth of the master and what kind of work will be carried out. In addition, do not forget that the workplace should be well lit. For this, a stationary lighting lamp is installed. It is best to choose a design that can change its position, since the device should not dazzle or create reflections during operation.

Materials and tools

As previously noted, if desired, you can make a workbench with your own hands. The workbench can be made from a corner or from a profile pipe, it all depends on the specific drawing.

Necessary tools for assembly and processing of materials used:

1. Level. In order for the work to be carried out to be accurate, the device must be located horizontally.
2. Metal processing is performed by a standard grinder. This tool is also required for grinding the surface, for which it is enough to replace the disc.
3. The connection of all elements is carried out using a welding machine. The welding seam is characterized by high rigidity and reliability. Today, welding is used extremely often, as many can purchase a compact welding machine.
4. A tape measure or a rigid ruler can be used to measure. It is important to observe all dimensions, since its stability and other operational qualities depend on the accuracy of the structure.
5. Some elements can be connected using a screwdriver. For connections, self-tapping screws for metal are used.
6. In some cases, several sheets of plywood are required to create a workbench. You can change the shape when using an electric jigsaw.
7. A drill is also required to work with materials. It allows you to get the required holes in metal and wood.

The required materials are the following:

1. Steel is used as the main material. The wall thickness should be 4 mm, due to which the structure is highly resistant to mechanical stress.
2. Pipe square 60 mm by 40 mm. The thickness of the metal used is 2 mm.
3. Corner, which has dimensions of 40 mm by 40 mm.
4. Steel strip with a thickness of 4 mm and the required size to create a tabletop.
5. Steel sheet of small thickness, which is required to create the sides of the structure.
6. Wooden boards for shelving.
7. Plywood, which is used to create boxes.
8. Screws for fixing detachable elements.
9. Guides, high strength for drawers.
10. Paint that is used to protect wood and metal.

After finding everything you need, you can proceed to the direct work. It should be borne in mind that the materials in question are suitable for creating a rather impressive design in size. Due to the large dimensions, a vice can be placed on one side of the locksmith table, and tools on the other.

Preparatory work

The work carried out is quite simple to perform. A do-it-yourself workbench for a garage can be made with basic locksmith skills. The preparatory work is as follows:

1. Procurement of all required materials.
2. Metal elements are cleaned of rust. It should be borne in mind that in many cases welding work on rusty metal is not permissible.
3. A workbench for a garage requires quite a lot of free space.
4. Welding work must be carried out in compliance with safety regulations.

You can make a table for the garage during the day if you have everything you need. Compliance with some recommendations allows you to avoid quite a lot of problems.

Assembling a workbench for a garage with your own hands

You can make a table in the garage with your own hands, subject to the basic recommendations. The whole process can be divided into just a few steps:

1. Existing material is being cut. Pipe and steel angle can be used to obtain a supporting structure. A metal-framed garage workbench can withstand significant impact.
2. In order for the locksmith's desktop to have the required dimensions, it is necessary to resize according to the drawings.
3. You can start work with the manufacture of a power frame. To begin with, the creation of a carrier element is carried out, which is installed on top of another carrier element, on which a steel sheet is fixed. You can weld the workbench yourself when using a welding preparation.
4. The bearing element is additionally reinforced with steel pipes. They act as stiffeners.
5. The table for metalwork works is established on legs. This structural element is also welded to the base. The recommended length of the applied elements is about 900 mm. Power jumpers are welded between the legs. They can significantly increase the rigidity and stability of the mechanism.
6. After creating the supporting element, you can begin to create boxes in which tools and parts will be stored. A do-it-yourself garage table is made for specific tasks. The number of boxes and their sizes can vary significantly. To create this element, a steel pipe is used. The frame of the boxes is reinforced with a metal channel, which becomes stiffeners.
7. The next step is to make a supporting frame that is suitable for creating a countertop. The frame must be very strong, as it will have a high load. Due to the use of a pipe made of thick metal, the workbench is durable and reliable.
8. After the creation of the supporting structure, its additional strengthening is carried out. To do this, the brackets are welded to the sides. Holes are drilled in the middle of each bracket, which are used to fasten the rear and other walls.
9. The boxes may have plywood walls. Due to this, the workbench becomes lighter. The sides are fastened with self-tapping screws. It is recommended to create boxes of various sizes, due to which the functionality of the device is significantly expanded. On the Internet there are various options for the location of boxes, the most suitable option is selected depending on preferences.
10. On the inside of the structure, holes are created to fix the guides along which the boxes will move.
11. In this case, a board is used in the manufacture of the table. It is laid on a previously prepared frame, where it is then fixed. Often, a metal plate is laid on top of wooden boards, designed to protect the tree from environmental influences.
12. All seams should be carefully cleaned. For this, a grinder and a file can be used. In the presence of raw seams, there is a high probability of injury. When processing seams, problems associated with the appearance of cracks and other defects may be detected.
13. The surface of the wood used must be well sanded. This creates a flat surface that is ideal for placing the steel sheet. Wooden sheets must be fastened securely, otherwise, when a load is applied, the sheet will walk or sag.
14. Fastening of a metal sheet should be carried out using hidden self-tapping screws. This is due to the fact that welding work can cause ignition of the previously used wood. The sheet used must be painted on both sides, thereby significantly increasing the service life of the workbench.

The last stage is represented by painting works. The paint is used to protect metal and used wood from exposure to high humidity. If you do not carry out painting, then the workbench will not last long.

Homemade workbench for the workshop

Recently, schemes that allow you to change the height of a certain part of the structure have been very popular. The height of the workbench in the garage is selected taking into account what kind of work will be carried out.

Folding carpenter's workbench

A table in the workshop with your own hands can be made in a variety of designs. The previously presented step-by-step instructions allow you to get a rather massive structure, the installation of which will require a lot of free space. If desired, you can also create a structure that will fold and unfold if necessary.

Carpentry for the workshop is characterized as follows:

1. When connecting all elements, bolts and other detachable elements are used. Due to this, you can quickly disassemble the structure. Welding in this case is practically not used. The use of bolts and screws significantly reduces the rigidity of the structure. Therefore, folding workbenches are used when performing minor work.
2. As a rule, lightweight materials are used to increase the mobility of the workbench. An example is a different thin-walled profile. It is best to choose a metal that does not react to exposure to high humidity. That is why the workbench will last quite a long time.
3. Some schemes provide for the creation of movable elements that significantly increase the functionality of the device. An example is the case when a countertop should be placed at a certain angle to the supporting element. Due to this, a fairly large number of guides are placed.

These points should be considered when creating a homemade folding workbench.

In conclusion, we note that the purchased workbench has a fairly high cost. That is why many decide to make a design with their own hands. Of course, this will require metal and other elements that can only be purchased.