Hydroline repair. Repair of hydraulics at a modern repair base. Repair procedure

Hydraulic equipment is the basis for the working mechanisms of many machine tools, presses, agricultural, construction, lifting and other machines. It is distinguished by high efficiency with low energy consumption. Hydraulics are quite reliable in operation and rarely fail. However, even the most durable mechanisms are subject to wear and tear. And then the question arises of repairing and replacing broken parts. Today, it is not difficult to purchase spare parts for a hydraulic motor and other hydraulic equipment in Moscow. But is it worth contacting unverified suppliers and buying the first components that come across? The hydraulic system is a complex device, and only the balanced operation of all components will provide it with optimal operation and a long service life.

Repair of hydraulic equipment

The main cause of breakdowns in hydraulic equipment are violations of operating rules, untimely prevention, installation of non-original components, use of low-quality working fluids and oils. Timely replacement of filters and the use of proven lubricants are guaranteed to extend the life of the equipment. In case of any manifestations of a malfunction of the device, even minor ones, you should stop working and contact the service center. Overhaul of hydraulic equipment is always expensive, so it is much easier and cheaper to conduct regular diagnostic checks. This is an affordable service that will save the owner of the equipment from many troubles, save him time and money.

Choosing a service center

Today in Moscow, offers for the maintenance and repair of hydraulic equipment come from many companies. Which one to trust your technique? Not every company is able to carry out inspections and perform repairs with the highest quality. When choosing a contractor, you should pay attention to the experience of his work and the availability of original spare parts. Don't go for cheap deals. Poor repair of hydraulic pumps and motors will negatively affect the operation of the entire hydraulic system and quickly lead to a new breakdown. Trust your equipment only to highly qualified professionals.

Our offers

Our company makes diagnostics and repair of hydraulic motors, hydraulic pumps, hydraulic distributors and hydraulic cylinders of all types. When replacing, only original parts are used.

• Professional repair of hydraulic motors includes its disassembly, cleaning, flaw detection of parts. After identifying worn parts and replacing them with new ones, grinding and fine-tuning of the nodes is carried out.
• Repair of hydraulic pumps involves the replacement of worn parts: piston groups, rubber parts, thrust bearings, pumping unit.
• When repairing hydraulic distributors, special attention is paid to the alignment of the holes. If necessary, the spools and other shut-off and control elements are replaced with their grinding under the holes.
• During the repair of hydraulic cylinders, the rubber parts of the rod, piston, sleeve are replaced.

All diagnostic and repair work is performed by experienced highly qualified specialists. Our company has a license to perform these types of work and conducts them in accordance with all requirements.

You have the opportunity to perform diagnostics of hydraulic equipment, order preventive or overhaul repairs, purchase original spare parts for any hydraulic devices. We provide a guarantee for all types of work carried out by us and for all components purchased from us.

Repair of hydraulic equipment is carried out in a specialized workshop, less often at the place of operation.

Car services use various power equipment, which is based on hydraulics, or rather a hydraulic cylinder and a hydraulic pump. Hydraulic cylinders come in direct and reverse acting. In direct-acting cylinders, the stem under the action of hydraulic fluid exits the cylinder, while in reverse-acting, on the contrary, it is drawn into the cylinder. Pumps are most often found in three types: manual, pneumatic-hydraulic, electro-hydraulic. In hand pumps, pressure is generated by the force applied to the handle and transmitted to the plunger.

In pneumohydraulic pumps, the force on the plunger is transmitted due to the reciprocating motion of the air motor. Electro-hydraulic pumps are most often used in car lifts, sometimes in presses and tire changers. and are more efficient than those listed above. As a rule, they consist of an electric motor with a power of 2-3 kW, a valve block, and a gear pump, which creates pressure in the hydraulic system. An integral part of any hydraulic system are high pressure hoses through which oil flows from the pump to the cylinder.

The main types of malfunctions of hydraulic equipment.

1 Failure of the hydraulic cylinder hose. This is the simplest malfunction that occurs due to the aging of the mouth of the hose, or increased pressure in the system, or due to mechanical stress. Eliminated by replacing the hose with a new one.

2 Malfunction of the hydraulic cylinder. Most often it manifests itself in the form of a hydraulic cylinder leak through seals (rubber and polyurethane rings or cuffs). Leakage can be caused by various reasons: wear of seals, wear or mechanical damage to the rod, wear or damage to the piston, corrosion of the hydraulic cylinder.

3 Hand pumps are mainly used in presses, body hydraulics, traverses of four-post lifts. The most common among the malfunctions are: leakage of a plunger pair, leakage, malfunction of the bypass valve.

4 Pneumohydraulic pumps are used in power body hydraulics, traverses, presses. Among the malfunctions, there are problems with both the pneumatic and hydraulic parts. Among the pumps of this system, most often there are cases of non-repairability, or unprofitable repair.

5 Electro-hydraulic pumps are widely used. Relatively often, the electric motor, pump coupling, gear pump, and bleed valve fail in them.

Our company carries out repair of the hydraulic equipment for car service. We are bringing back:

Hydraulic transmission racks;

Jacks;

Traverses;

Lift hydraulic cylinders;

Hydraulic pumps of all types, including pneumatic pedals and pneumatic hydraulic pumps;

Hydraulic cranes;

Call us - our prices will suit you!

We offer repair of hydraulics of the following brands:

[email protected]. Stankoimport

AMGO. Atis. AGM. Armada

Beissbarth. Bendpack. Brann. Hofmann

Gruber&Stein. Kraftwell. launch. MAHA

nordberg. Nussbaum. OMA. OMAS

Orlandini. PEAK. ProTech. Ravaglioli (RAV)

Red Line Premium. Remax. Rotary. Safe

SIVIK. silverline. SLIFT. Space Stenhoj

Stertil Koni. Titan. Torin. Trommelberg

Velyen. Werther. ASO Pskov. INCOST

Techno Union. Storm. Sorokin. RST

Other hydraulics from unknown manufacturers

Repair of hydraulic cylinders additionally includes the possibility of worn surfaces of the sleeves and rods of hydraulic cylinders.

Repair of hydraulics of special equipment and other hydraulic equipment is carried out at a repair base in the Moscow region, we repair hydraulics with the possibility of restoring worn parts or replacing them with new components. Test benches allow you to check the repaired equipment and provide the customer with a guaranteed working product for long-term and successful operation.

Please note that we do not repair:

• inflated housings for hydraulic pumps and hydraulic motors;
• broken geometry of sleeves and rods of hydraulic cylinders (rupture, swelling, crack).

Repair procedure:

Before starting work, our manager makes a full consultation by phone and helps the client determine the approximate cost and timing of the work, as well as the feasibility of the repair. The exact prices are announced immediately after troubleshooting at our enterprise, troubleshooting time:

• hydraulic cylinders - from 1 to 4 days;
• hydraulic motors/hydraulic pumps/distributors - from 3 to 7 days;

The company "HYDROTEMA" specializes in the repair of hydraulic cylinders in Moscow and the Moscow region. Products of such manufacturers as:,.

Urgent repair of hydraulic cylinders is an urgent need for those industries that use hydraulic drives. Such equipment is used in special equipment operating in the construction, road construction industries, mining, processing and transport enterprises. Among the mechanisms that need to be restored are car carriers, asphalt pavers and truck cranes, forklifts and concrete pumps, bunker trucks and tail lifts, loader cranes and garbage trucks, tractors, excavators and various types of agricultural machinery.

The company "HYDROTEMA" carries out the restoration of telescopic devices with the following parameters: diameter - up to 2000 mm, rod length - up to 16000 mm.

The procedure for the repair of hydraulic cylinders in Moscow and the region

Professionals from Hydrothema with extensive experience are able to perform accurate diagnostics, select the necessary spare parts and bring to mind a failed mechanism. At the same time, the customer receives not only high-quality work, but also a reasoned cost calculation, post-repair testing on a test bench and advice on the further operation of hydraulic equipment.

The accuracy of price calculation is due to professionally performed diagnostics and equipment troubleshooting. Depending on the degree of wear of parts and assemblies, the complexity of damage, the following operations are included in the set of measures for the repair of hydraulic cylinders:

• dismantling of hydraulic equipment and detailed disassembly;
• inspection, diagnostics and defect detection;
• cleaning surfaces from lubricants and dirt of a different nature;
• replacement of defective, obsolete and unusable pistons, rods, sleeves;
• checking and replacing seals;
• surface restoration;
• production of turning and welding works;
• assembly and installation of a hydraulic cylinder;
• checking the performance and technical characteristics on the test bench.

As spare parts, assemblies and blocks, only imported products and blanks are used: delivery is carried out from Romania and Italy.

Repair deadlines:

• Fault detection - 1-2 days from the date of receipt of the order;
• execution of an order-order and preparation of a cost estimate taking into account the cost of work and replaceable parts - 4 hours;
• the total time to restore the product - from 1 day.

The cost of repairing hydraulic cylinders

The warranty period for the work performed is from 3 months.