The option of sheathing a fence with a euro fence for a private area is not uncommon. And, most likely, not only because the goal is to make it attractive. This material is affordable, and there are no particular difficulties in installation, and its light weight and variety of configurations, sizes and colors have made it popular. Moreover, manufacturers offer both a more expensive type of product, and a cheap one. I would like to choose, and draw your attention.
Price difference
The modern construction industry has proposed several options for a metal picket fence. It can be with or without a rolled edge.
The whole difference is that the manufactured pickets are processed under production conditions with several protective layers, powder paint and rolled on a rolling mill. The appearance of such products is impeccable. Products are sorted into packs, which is convenient for transportation. You can order them in any quantity and any size.
Products cut from profiled sheet remain with raw edges. Therefore, their appearance is less aesthetic, and the paint runs the risk of being peeled over time. In addition, the edges can be traumatic. But their price is much cheaper. Craftsmen, in order to save money, buy a cheaper option, and independently process products, bringing them to perfection.
The eurostudent can be coated with a polymer on one or both sides, and there is also a powder coating. With the powder method of painting, the eurostudent is uniformly covered on both sides with one color.
In addition, products with rounded edges appeared, which gives the design a more elegant look.
Material Features
In general, any type of metal fence has many more advantages than wooden products, and even profiled sheet products:
- galvanized steel does not rot;
- various configurations, colors and sizes allow you to combine with any material;
- light weight and compact packaging does not create difficulties during transportation;
- excellent material for do-it-yourself installation (small size and weight of products);
- it is possible to make a gate and a gate with gaps and without them, it all depends on the method of sheathing;
- in case of accidental deformation or damage, you do not have to change the whole section, or look for a suitable paint, just change one or more pickets, and the gate or gate will be like new;
- does not need constant care, polluted places are washed with water.
And, of course, a beautiful appearance combined with practicality and lightness of ready-made structures. Such advantages of the material make it possible to sheathe even complex types of products, such as sliding gates.
Frame manufacturing
Scheme of the wicket frame with dimensions for cladding with eurostudent
For a gate frame or gate, you will need profile pipes with a section of 60 X 40 or 40 X 20, it all depends on the size of the wings. The greater the width and length of the product, the stronger the pipes must be used.
Experts advise using a profile of just such a section, since pipes with a square section of 40 X 40 mm are less rigid, and if you choose products with a section of 60 X 60 mm, then their appearance will be more massive, which is not combined with a thin euro-picket.
The metal elements of the frame are welded, reinforced with crossbars, for which pipes with a smaller cross section can be used. The crossbars are welded in such a way that it is convenient to fix the euro picket on them.
For example, on a sash 2 m high, one cross member in the middle is sufficient. If you need more reliable structures, the number of crossbars can be increased. But, each of them will have to attach pickets.
The number of stiffeners depends on the height of the products. The higher the gate, the more jumpers are welded to their frame. This is explained by the fact that lightweight material may not withstand wind loads, as a result of which it is deformed.
Pole installation
For gates and wickets made of eurostudent, poles can be installed without resorting to concreting. Although, the arrangement of the pillars depends on the condition of the soil. On difficult soils, it is better to lay the foundation in accordance with all the rules, or use screw piles.
In places where there are no problems with the soil, it is enough to drill holes, the depth of which is half the depth of the pillars. Posts should be inserted into the holes, and hammered to the desired depth. Be sure to check the verticality of the installation with a level or plumb.
After driving, the voids of the hole should be covered with gravel, and carefully rammed. It is possible to increase stability, before filling the hole, install metal spacers on the pillars, and only then fill it with gravel and pour it with liquid cement mortar. Before fixing the frames on the supports, the solution should be allowed to harden.
Gate and gate hinges are welded on the supporting elements, respectively, other parts of the hinges are welded on the frames themselves. Everything is carefully measured to avoid distortions. After hanging the frames, the movement of the leaves is checked for free closing.
Sheathing process
All welding seams should be cleaned and treated with a primer, after the products have dried, they should be painted in the color of the euro picket fence. It is advisable to apply the paint in two layers, so the metal elements will be more durable.
Further, the distance between the pickets is calculated, at the discretion of the owner, but it is advisable not to make a gap of more than 5 cm. To make the distance between them the same, you can apply the required width of the board, which is applied to the fixed product. Right next to it, the next picket is applied and fixed. And so, until the end of the fastening.
Fences are fastened in four or more places with rounded self-tapping screws. In order not to damage the top layer of the picket during fastening, you can use special rubber gaskets for self-tapping screws.
Sheathing can be carried out in various ways, ranging from a gap of 2 cm to 8 cm, but such a gap is assumed only if the pickets are staggered, that is, one is attached from the inside and the other from the outside.
Eurostudent is a material that imitates wood very well, but costs much less, and this makes buying a gate or a wicket from it incredibly profitable. Aesthetic appearance and financial affordability have become the key to the fact that today the eurostudent can be seen on a huge number of sites surrounding both modest, unremarkable outwardly houses, and chic country mansions.
The popularity of gates made of eurostudent is largely due to the fact that this material is quite versatile. It fits perfectly into any architectural style, harmoniously coexists with other building materials. The European fence looks especially advantageous in the company of brick and stone - artificial or natural.
Types of gates from eurostudent
Advantages of gates and wickets from eurostudent
Variety of colors
Perhaps, not a single building material in this regard is as good as a euro picket fence. Its coating can even imitate natural stone or wood, and there is no need to even talk about the variety of color designs.
High degree of strength
This indicator depends not only on the material, but also on the type of profile. Most often, gates made of M- or U-shaped eurostaketin are purchased and installed, however, if you live in an unguarded area, it will be more profitable to buy a profile in the form of the letter “C” (it is often called anti-vandal).
Unpretentiousness in care
Often, owners of land are faced with the fact that the gate and gate need to be painted regularly. This will not happen with the European picket, since the material does not fade in the sun. The polymer coating applied to galvanized steel will reliably protect the gate from moisture and rust.
Durability
If the euro fence from which the gate or gate is made is of high quality, and all technical requirements were met during installation, then the euro fence will serve you for about 30 years.
Easy to install
By entrusting the installation of gates or wickets made of europalette to specialists with extensive experience and knowledge of all the nuances of working with the material, you can be sure that the gates and wickets will be installed in the best possible way.
The widespread use of metal picket fences can significantly expand the capabilities of manufacturers of building materials. Additional research in the field of protective coatings improves the material every year, making it more wear-resistant and at the same time, without affecting the cost of the material. Gates made of metal picket fence are one of the most inexpensive protective structures. At the same time, the gates are much lighter than from other materials.
Features of metal picket gates
As mentioned above, the use of a metal fence for gates can significantly reduce the weight of the entire structure. This significantly reduces the load on the rotary mechanism, thereby significantly increasing the service life.
Compared to the use of metal profiled sheets for gates, a metal picket fence does not carry a large wind load due to the distance between the picket fence.
Despite the one-sided opinion that only open types of fences can be made from any type of fence, this is not true. In fact, using a metal picket fence, you can successfully install both open and closed fences.
The closed version of the fence from the euro picket fence can be made using a special arrangement of individual elements. For this, the picket fence is staggered in relation to each other. In this case, the role of the separator is played by longitudinal logs. With this arrangement, a completely closed version of the fence is obtained with through holes between the pickets for free passage of air. At the same time, the wind load is much lower than when using solid material for a blind fence.
In the same way, you can install the gate from a metal picket fence.
In addition to the ability to reduce the wind load on the gate with a metal picket fence, there are a number of undeniable advantages. For example, eurostudent is a more durable material than a metal profiled sheet. In addition, illegal entry by climbing over a fence or metal picket gate is almost impossible due to the high probability of serious damage. Injury is possible due to the sharp upper edges of the picket fence.
High-quality steel is used in the manufacture of eurostudent. In addition, each workpiece is processed on a special machine, as a result of which the necessary profile is acquired. On giving a certain shape to the picket fence, processing does not end. All types of metal picket fence are subjected to hot-dip galvanizing without fail.
The next stage of processing is the application of the final external coating of the euro picket fence. The most common is the application of a polymer film, which protects well from oxidation and corrosion. This processing option is the cheapest.
Another, more expensive protective option for processing a metal picket fence is powder coating. This type of protection is the most durable, but it costs much more than the first.
Installation of gates from eurostudent
Gates made of metal picket fence are carried out with preliminary measurements and determination of the future installation site. In order to install any gate, it is necessary to complete the installation work on the fence device.
To install the gate, it is necessary to carefully install the support pillars on which the gate will be installed. In contrast to the support poles, which are used for mounting the fence, and which are installed to a depth of 1/3 of the height of the fence, the installation of the underground part of the support poles for the gate is carried out with an additional margin of safety. The depth of the underground part of the support post for the gate must be at least? from the height of the fence.
Directly the installation of the gate itself is carried out on a flat horizontal surface. First you need to make the installation of the frame for the gate of rolled metal. Usually, steel pipes of rectangular section are used for this. The frame is made using a welding machine. In order to strengthen the structure of the frame, it is necessary to additionally weld two pipes of the same size in the middle of the frame crosswise from one corner to the other diagonally. In this case, one pipe remains solid, and the second will have to be cut first.
Swivel mechanisms are also attached to the support pillars by welding separately from the gate. When fixing the rotary mechanisms, it is necessary to accurately calculate the location of the mechanisms. In addition, there is some nuance - the rotary mechanisms are not attached immediately to the support pillars, but with the help of metal bars about 5 - 10 mm from the support pillar.
A metal picket fence is attached to ready-made frames. The picket fence can be fixed on the ground, and then the gate can be hung. You can also vice versa, first hang the gate on the hinges, and then mount the metal picket fence on the frame.
“Metal picket fence gates,” an experienced installer explained, “are mounted exactly according to the same principle as the gate.”
To ensure the finished look of the house or cottage, a variety of turnkey fences are erected. The fence is primarily intended to describe the outer border of the territory. And it has practical significance, for example, it serves as protection against the penetration of unwanted guests, provides peace. And when choosing installation methods, the turnkey fence is considered the most profitable, its price includes all the hassle associated with the installation of the finished structure.
What can be turnkey fences and their features
Today, the buyer has a huge selection of fencing, which differs in appearance, pricing policy. The company that offers its assistance at the moment when you decide to buy a turnkey fence in Moscow provides different options:
- fences to order from a welded mesh with a polymer coating;
- metal fence;
- denser fence - blinds made from a metal profile;
- gabion structures (they are a metal mesh that is filled with material, in this case stones);
- construction of temporary fences.
The rating of popular fences is headed by metal fences. Their main advantages are durability, endurance to various damages. This is exactly the option when you can spend money once on the installation and purchase of the fence itself and not deal with this issue for 20 years.
When choosing a fence, and installing it on your site, you should pay attention to nearby objects. It is worth ordering a high and deaf fence if it is installed near roads or directly opposite the facade. But, if there is a personal plot of neighbors nearby, then you should think about choosing another fence so that it does not obscure and interfere with the growth of plants. Also, a significant role is played by the correspondence of the style of the fence with the main view of the house.
Who to entrust the manufacture of a turnkey fence
You can entrust this task only to a proven large company. And we offer to order fences inexpensively without loss of quality.
Professional staff will help you choose the appropriate option, taking into account the individual wishes of the client and the features of the area. Because the fence is not only the right to feel protected, confident, but also an opportunity to show your wealth. Ordering a turnkey fence from us is simple and profitable, since our company works directly with material manufacturers, and the structures are manufactured using modern equipment.
Even on a good fence, the gate and the gate should stand out - to meet guests with their friendly appearance. And how to do it yourself?
Gate of eurostudent with brick pillars
The simplest option - to highlight with color - does not always “work”. It is best to use another material for this. Then it will be possible to experiment with color, and with the form, and with the design.
The choice of material for the gate
We will not look for options for expensive fences made of wrought iron bars and brick walls: those who have the opportunity to build such a fence will also find money for a designer.
For fences made of other materials, a gate and a gate made of eurostudent would be a good choice. Since its appearance on the market, it has been in constant demand, because it has many advantages over both wood and profiled sheets:
- Unlike wood, the European fence does not rot, because it is made of galvanized steel and coated with two layers of polymer paint. Service life - up to 50 years.
- A variety of colors and textures, combined with different profiles and sizes, allows the use of a metal fence in various fences and structures: from flower beds and front gardens to the manufacture of gates, gates, and even as a fence on the site. The width of the bar is from 70 to 128 and the length is from 0.5 to 3 - this is enough to "enclose" whatever your heart desires.
- Transportation even with your own hands is not difficult: picket fence packs do not take up much space.
- You can make a gate, a gate and a fence made of a euro picket fence with your own hands. You can align light planks along the cord and attach them with self-tapping screws alone.
- The best part is that the design of the fence and the gate from the euro picket fence can be anything. Choose profile, color, plank shape. You change the height and width of the “fence”, mount it with a different gap, in one or two rows. Can you imagine how many options for decorating the entrance to the site?
Fence design options - And all this beauty does not require maintenance and regular staining. In case of damage, it is enough to replace a couple of strips.
Some production features
Features lie in the processing method.
The galvanized and painted metal strip is passed through rollers that gradually form a profile, then cut into a predetermined size. Such processing does not deform the metal coating.
There is another production - "garage". Sometimes the strips are cut from the finished profiled sheet, in another case, the profile is bent with a home-made stamp-press, breaking the polymer coating. To ennoble the incised edges, they are bent by 180 °, the paint in this case may peel off altogether.
Therefore, when buying a European fence, you need to pay attention to the quality of workmanship. Do not buy from dubious manufacturers.
How to make a gate from a metal fence
Now that the agony of choosing the material and design of the wicket and gate is over, you can begin to translate ideas into practice.
The first step is to prepare the tool and materials:
- Roulette, screwdriver, grinder, almost everyone now has a level.
- To install the pillars, you will need a drill, sand, crushed stone, cement.
- It is impossible to mount the wicket and gate frame without a welding machine. It’s good if you are a welder and you can make a gate yourself, otherwise you will have to look for a master.
- Self-tapping screws in the color of a metal fence, primer, paint, circles for grinders are consumables.
We note right away that the gate posts and gates must stand firmly: they are not connected into a single “chain” like fence posts. That is why, when laying a strip foundation for a fence with brick posts, the foundation is not interrupted under the entrance to the site. If the strip foundation is not required, then the "input" pillars are installed especially carefully.
- Regardless of the soil, we drill a well deeper than the freezing level.
- At the bottom we pour a layer of sand and ram.
- Ready for the poles. For them, we use a pipe Ø100 mm or a profile pipe 80 by 80 with a wall thickness of at least 2-3 mm. We take the length with a small margin. At the bottom of the pipes, we weld 2 transverse struts, they will not allow the soil to squeeze the pillars out of the ground. After that, the columns are primed and painted.
- We install the poles in the wells, align with the cord and level.
- We fill it with concrete a quarter of the height, check the correct installation. It is not necessary to fill the pit with concrete completely: this increases the surface of adhesion of concrete to the ground and the pushing force increases.
- After a day or two, when the concrete sets, we fill the hole to the top with a mixture of sand and gravel. We ram in layers.
Do-it-yourself poles stand firmly and are not subject to extrusion. Around the metal base, you can lay out a brick column, make a formwork and pour a column of cobblestones, assemble a fake column from plastic blocks.
Having installed the pillars, we measure the distance between them and make frames for the gate and gate. If you do not have a welding machine, and you do not have the opportunity to make them yourself, contact your friends, neighbors - now many have welding at home. Frames must necessarily have braces-reinforcements, especially gate leaves.
After all welding work, the gate frames and gates are cleaned and primed. After drying, paint in two layers.
It is not difficult to mount the eurostudent with your own hands, which we will do now. For this:
- First, mark the position of the slats so that the gaps between them are the same. We take into account that during installation, the gaps will be closed with second-row slats. So you can adjust the "transparency" of the gate.
- We stretch the cord at the desired height and begin to mount the picket fence. Have you already stocked self-tapping screws to match the color of the gate?
- It will not be difficult to install the gate: it's just two more gates, but larger in size.
When making a gate from a European fence, do not take the time to try on, mark, install according to the level of each plank, do not save on installing poles. The entrance to the site is its face and it should be beautifully decorated.
