We bring to your attention a typical example of a job description for a construction carpenter of the 5th category, a sample of 2019/2020. A person with education and work experience can be appointed to this position. Do not forget, each instruction of a construction joiner of the 5th category is issued on hand against receipt.

It provides typical information about the knowledge that a 5th grade construction carpenter should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. Construction joiner of the 5th category belongs to the category of workers.

2. A carpenter of the 5th category is accepted by a person who has: _________ (requirements for education, experience)

3. A construction joiner of the 5th category is hired and dismissed by _______ organizations on the proposal of _________. (director, leader) (position)

4. Construction joiner of the 5th category must know:

a) special (professional) knowledge:

- properties of hardwood and methods of its processing;

- methods of manufacturing, fitting and hanging complex joinery.

- instructions for the use, operation, storage of fixtures, tools, measuring instruments and other technical means used in their work.

- sketches and drawings directly used in the process of work.

— requirements for the quality of work in related construction processes.

b) general knowledge of the employee of the organization:

— rules on labor protection, industrial sanitation and fire safety;

- rules for the use of personal protective equipment;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- range and marking of materials used, consumption rates of fuels and lubricants;

- rules for the movement and warehousing of goods;

- types of marriage and ways to prevent and eliminate it;

- production signaling.

5. In his activities, the Construction Joiner of the 5th category is guided by:

- the legislation of the Russian Federation,

- Charter (regulations) of the organization,

- orders and orders of _________ organization, (general director, director, head)

- this job description,

- The internal labor regulations of the organization.

6. Construction joiner of the 5th category reports directly to __________ (a worker with a higher qualification, the head of production (section, workshop) and the director of the organization)

7. During the absence of the Construction Joiner of the 5th category (business trip, vacation, illness, etc.), his duties are performed by a person appointed by _________ of the organization (head position) on the proposal of _________ (position) in the prescribed manner, which acquires the corresponding rights, duties and is responsible for the performance of the duties assigned to him.

2. Job responsibilities of a construction carpenter of the 5th category

The labor duties of the Construction Joiner of the 5th category are:

a) Special (professional) duties:

- Performing carpentry work in the production of general construction work.

— Production and installation of handrail roundings.

— Production, assembly and installation of semi-circular bindings and boxes.

- Fitting and hanging with insert hinges of window frames and door panels.

– Marking according to sketches and making templates for plastering and molds for stucco work.

– Installation with fitting in place of complex mortise and partially mortise devices (through bolts, fanlight devices, locks with a rotary handle and automatic, etc.).

– Carpentry work during the installation of grain processing equipment.

– Manufacturing and installation of round and shaped pipes, boxes of parts for gravity pipelines, troughs for augers, trough descent and receiving tables, frames for technological grain processing equipment.

- Performance of work by workers of lower qualifications in this profession.

- Management of workers of lower ranks of the same profession.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

– Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in good condition.

- Maintaining established technical documentation.

3. The rights of a construction carpenter of the 5th category

A construction carpenter of the 5th category has the right to:

1. Submit proposals for management consideration:

- to improve the work related to the duties provided for in this instruction,

— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of a construction carpenter of the 5th category

A construction carpenter of the 5th category is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description for a construction carpenter of the 5th category - a sample of 2019/2020. The duties of a construction joiner of the 5th category, the rights of a construction joiner of the 5th category, the responsibility of a construction joiner of the 5th category.

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part No. 1 of issue No. 40 ETKS
The issue was approved by the Decree of the USSR State Committee for Labor, the Secretariat of the All-Union Central Council of Trade Unions dated 10.01.1985 N 7 / 2-13

carpenter

§ 76. Joiner of the 2nd category

Job Description. Manual planing of unlined squared parts of a simple profile. Assembly of frames on metal clips. Putting dowels on glue. Cleaning glue streaks from solid parts. Coating parts and shields with glue with rejection. Sticker for upholstery products.

Must know: technical conditions for the processing of parts; methods of work when planing, cleaning parts and spreading with glue.

Work examples

1. Details of furniture bar - planing by hand.

2. Carpentry products (stool, chair) - disassembly while maintaining the integrity of the parts.

3. Russian hockey sticks - cleaning and ovalizing with a planer.

4. Stool covers - manufacturing.

5. Overhead devices - installation.

6. Joiner's boards of all sizes - gluing into tongue and groove with adjustment of the plot bars.

§ 77. Joiner of the 3rd category

Job Description. Gluing in mechanical clamps and other devices of unlined shields, frames, etc. on frame or box spikes. Rear wall installation. Gluing plywood and softwood bars. Cutting plywood overhangs by hand. Gluing of details in an overlay, manual cleaning of uncoated bar details of a simple profile. Repair of wooden wheels. Determining the category of wheel repair.

Must know: basic requirements for the quality of work; types of glue and methods of its preparation; mechanical wym device; rules for preparing tools, templates and fixtures; the main types of wood and its defects; types and designs of manufactured joinery products; rules for the repair of wooden wheels.

Work examples

1. Bars-plots - knitting with longitudinal edges in hayme with a selection by color and texture.

2. Bars, frames and boxes - gluing in mechanical clamps and other devices.

3. Details of the bars - cutting "in the mustache", into the corner and joining with carpentry knitting on glue, followed by cleaning.

4. Ski blanks - sealing defects.

5. Two-layer and massive skis - repair, correction of wingedness.

6. Door leaves, window sashes - pre-assembly with adjustment.

7. Rectangular frames, door and window frames - production.

8. Ventilation grilles, interior equipment of freight cars, strips for fastening window and door trim in diesel locomotives - manufacturing and installation.

9. Rectangular handrails - manufacturing and cleaning for painting.

10. Tongue or quarter - planing by hand using a planer, sampling.

11. Glazing beads, layouts - gluing overlay.

12. Drawers of furniture products and upholstered furniture - installation of rear walls.

§ 78. Joiner of the 4th category

Job Description. Assembling units from unlined parts. Gluing bars in clamps with heating by high frequency currents. Bonding of veneered frames and bars made of solid hardwood in vaims and various fixtures. Planing, cleaning and grinding of sags in frames and shields made of coniferous wood and in bar details of a complex profile. Preparation of surfaces of parts of various products for veneering. Complex production of boxes, furniture products for various purposes. Preparation and installation on glue and screws of parts for unfinished units and products; installation of fasteners in unfinished units and parts. Drilling holes for dowels and screws with manual pneumatic tools, setting dowels. Repair of bent furniture products.

Must know: arrangement of mechanical wyms and wyms with HDTV heating; rules for sharpening and adjusting carpentry tools; basic physical and mechanical properties of wood; properties of the adhesive used; allowances and processing tolerances; simple drawings and sketches.

Work examples

1. Furniture details - preparation of surfaces for veneering (puttying of defective places).

2. Cabins of passenger elevators - manufacturing and assembly.

3. Legs of chairs, armchairs - cleaning, grinding and trimming.

4. Guide rails, rear walls and brackets in cabinet furniture, unfinished chair seats - preparation and installation with glue and screws.

5. Frames and shields - solid hardwood decal.

6. Frames, boards and boxes made of solid hardwood - gluing in wyms and other fixtures.

7. Lattices, strapping - assembly, planing, jointing, veneering with planed veneer.

8. Chairs - assembly of units from unlined parts.

9. Joiner's boards and others - planing, jointing of plots, assembly, preparation for facing, facing with sliced ​​veneer.

§ 79. Joiner of the 5th category

Job Description. Performance of the whole complex of works on the manufacture of furniture of a simple design according to drawings and sketches. Cleaning and grinding of lined parts and assemblies, fitting and fastening with glue and screws of parts to finished assemblies and products. Preparing and hanging doors in unfinished products. Repair of non-facial parts and assemblies or surfaces prepared for an opaque finish. Repair and restoration of assembled products of lattice furniture. Performing all types of work on the main woodworking machines.

Must know: technological process of furniture manufacturing; requirements for the surfaces of parts intended for cladding and finishing; ways of repair and restoration of furniture; types of carpentry connections; product design; requirements for the quality of furniture and materials; assembly and facing works.

Work examples

1. Passenger and isothermal doors of wooden construction cars, ceiling arcs of cars of all types - manufacturing and installation.

2. Cabinet doors, unfinished cabinets - fitting and hanging.

3. Multi-layer skis - manual finishing to the specified dimensions, processing of the sliding and upper surfaces.

4. Alpine and slalom skis - cleaning the side surfaces with a planer, cycles and sandpaper, bringing them to the final dimensions.

5. Alpine and slalom skis - determination of dynamic properties on a special machine and bringing to the required degree of rigidity and flexibility.

6. Sports bows - bringing to the final size.

7. Unfinished furniture - complex production of new samples.

8. Panels of counters, lined radiator boxes - production and assembly.

9. Guide rails, shelves and brackets for cabinet furniture in finished form - adjustment and installation with glue and screws.

10. Luggage shelves for lying - production with preparation for finishing.

§ 80. Joiner of the 6th category

Job Description. Performance of the whole complex of works on the manufacture of artistic furniture and furniture of complex design according to the drawings. Assembly of cabinet and lattice furniture from polished units and parts. Selection, adjustment and fastening of front fittings, mirrors, glass doors and shelves in finished furniture, cleaning of parts and assemblies lined with sliced ​​veneer of valuable wood species or shaped surfaces. Repair of facing parts and assemblies intended for transparent finishing. Repair and restoration of assembled and finished cabinet furniture with the replacement of individual components and parts.

Must know: technological process of manufacturing artistic furniture; requirements for the quality of sliced ​​and peeled veneer, plywood, raw materials and other materials used; methods of setting and fastening fittings, mirrors, glass doors; rules for assembling cabinet and lattice furniture; reading drawings.

Work examples

1. Mirrors, glass doors and shelves - installation and fastening.

2. Finished cabinet furniture - installation of front fittings.

3. Finished furniture - complex production of new samples.

5th category

§ 79. Joiner 5th category

Characteristics of works. Performance of the whole complex of works on the manufacture of furniture of a simple design according to drawings and sketches. Cleaning and grinding of lined parts and assemblies, fitting and fastening with glue and screws of parts to finished assemblies and products. Preparing and hanging doors in unfinished products. Repair of non-facial parts and assemblies or surfaces prepared for an opaque finish. Repair and restoration of assembled products of lattice furniture. Performing all types of work on the main woodworking machines.
Must know: technological process of furniture manufacturing; requirements for the surfaces of parts intended for cladding and finishing; ways of repair and restoration of furniture; types of carpentry connections; product design; requirements for the quality of furniture and materials; assembly and facing works.
Work examples
1. Passenger and isothermal doors of wooden construction cars, ceiling arcs of cars of all types - manufacturing and installation.
2. Cabinet doors, unfinished cabinets - fitting and hanging.
3. Multi-layer skis - manual finishing to the specified dimensions, processing of the sliding and upper surfaces.
4. Alpine and slalom skis - cleaning the side surfaces with a planer, cycles and sandpaper, bringing them to the final dimensions.
5. Alpine and slalom skis - determination of dynamic properties on a special machine and bringing to the required degree of rigidity and flexibility.
6. Sports bows - bringing to the final size.
7. Unfinished furniture - complex production of new samples.
8. Panels of counters, lined radiator boxes - production and assembly.
9. Guide rails, shelves and brackets for cabinet furniture in finished form - adjustment and installation with glue and screws.
10. Luggage shelves for lying - production with preparation for finishing.

From July 1, 2016, employers are required to apply professional standards if the qualification requirements that an employee needs to perform a certain job function are established by the Labor Code, federal laws or other regulatory legal acts (Federal Law of May 2, 2015 No. 122-FZ).
To search for approved professional standards of the Ministry of Labor of the Russian Federation, use

Characteristics of works.

Performance of the whole complex of works on the manufacture of furniture of a simple design according to drawings and sketches. Cleaning and grinding of lined parts and assemblies, fitting and fastening with glue and screws of parts to finished assemblies and products. Preparing and hanging doors in unfinished products. Repair of non-facial parts and assemblies or surfaces prepared for an opaque finish. Repair and restoration of assembled products of lattice furniture. Performing all types of work on the main woodworking machines.

What should know:

• furniture manufacturing process
• requirements for the surfaces of parts intended for cladding and finishing
• furniture repair and restoration
• types of carpentry connections
• product design
• requirements for the quality of furniture and materials
• assembly and facing works.

Work examples

1. Passenger and isothermal doors of wooden construction cars, ceiling arches of cars of all types - manufacturing and installation.
2. Cabinet doors, unfinished cabinets - fitting and hanging.
3. Multi-layer skis - manual finishing to the specified dimensions, processing of the sliding and upper surface.
4. Alpine and slalom skis - cleaning the side surfaces with a planer, cycles and sandpaper, bringing them to the final dimensions.
5. Alpine and slalom skis - determination of dynamic properties on a special machine and bringing to the required degree of rigidity and flexibility.
6. Sports bows - bringing to the final size.
7. Unfinished furniture - complex production of new samples.
8. Counter panels, lined radiator boxes - production and assembly.
9. Finished railings, shelves and brackets for cabinet furniture - adjustment and installation with glue and screws.
10. Luggage shelves for lying down - production with preparation for finishing.

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Instructions for the position " Carpenter-machinist of the 5th category", presented on the website, complies with the requirements of the document - "DIRECTORY of qualification characteristics of workers' professions. Issue 64. Construction, installation and repair and construction work. (Including additions approved by: order of the State Committee for Construction and Architecture N 25 of 08.08.2002, N 218 of 12.22.2003, N 149 of 08.29.2003, letter of the State Committee for Construction and Architecture N 8 / 7-1216 of December 15, 2004, by order of the Ministry of Construction, Architecture and Housing and Communal Services N 9 of December 2, 2005, N 163 of May 10, 2006 N 399 of December 5, 2006, by order of the Ministry of Regional Development , construction and housing and communal services of Ukraine N 558, 12/28/2010)", which was approved by order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on 10/13/1999 N 249. Agreed by the Ministry of Labor and Social Policy of Ukraine. Entered into force from 1 January 2000 The status of the document is "valid".

Qualifications
Vocational education. Advanced training and work experience as a carpenter-machine operator of the 4th category - at least 1 year.

Knows and applies: properties of hardwood and valuable species, methods and rules for its processing; methods of manufacturing, assembling, fitting, mounting, installation of complex joinery, furniture, built-in furniture; methods and rules for making joints, assembling elements of joinery, furniture and built-in furniture of complex design; rules for compliance with the sequence of work in accordance with the technology; requirements for the quality of work; construction, operating rules, adjustment of woodworking machines; rules for preparing the cutting tool for work; theory of wood cutting; rules for reading technical drawings; technological schemes for cutting materials; device and rules for the use of control and measuring instruments and tools; standards for raw materials and finished products; causes of marriage and ways to eliminate it; rules for compliance with fire and electrical safety; rules and regulations on labor protection during the performance of work.

Description of work, tasks and job responsibilities
Performs complex carpentry work, woodworking by hand, mechanical and electric tools, woodworking machines. Fabricates and installs complex carpentry, furniture, built-in furniture.

Work examples
Production on woodworking machines and the establishment of rounding of handrails, semi-circular frames and boxes, their assembly and installation. Production of complex parts, furniture elements and built-in furniture using manual, mechanized and electric tools, on woodworking machines. Drilling holes on multi-spindle drilling and filler machines with mechanical feed of parts. Planing veneer from wood of various species on veneer planers. Copy turning, other complex turning works according to samples or drawings. Milling recesses, grooves for fittings on facade surfaces. Cutting curved blanks on single-spindle and multi-spindle machines. Cutting openings, windows in cladding panels, wood-laminated materials with round saws and press dies. Jointing of edges, transverse cutting of peeled, sliced ​​veneer. Fittings and hangings with cutting curtains of window frames, door panels, complex details, furniture elements, built-in furniture. Marking according to sketches and making templates for plaster work, molds for stucco work. Installations with fittings to the place of complex mortise and partially mortise accessories (through latches, fanlight accessories, automatic locks, with a rotary handle, etc.). Production of architectural details on turning, milling machines. Production of auxiliary devices, templates according to drawings. Establishment of woodworking machines, participation in their scheduled preventive maintenance.