How to make a fence out of plastic bottles. Fences from plastic bottles. Types of bottle fences

If you decide to build a fence from plastic bottles, then our article is for you. We will tell you the types and options for creating fences, as well as possible errors. To date, this type of construction has gained its popularity due to its unusual appearance and minimal financial costs. Almost every family has a few plastic bottles, and someone deliberately collects them just in order to make a fence or a mini flower bed. So, what to do with a large volume of plastic bottles?

Border and plastic bottle fence

Having decided to build in the garden or in the country, you should start with a simple option. For example, flowerbed fences.

When choosing plastic bottles for a flower bed, try to take them in the same color scheme so that the fence looks neat and beautiful.

Step-by-step instructions for creating a flower bed:

You can paint it with paint or leave it as is.

In any case, it will look original. As a fence decoration, you can make flowers or unusual figures of animals from plastic bottles.

To prevent the bottles from loosening and falling, place them as close as possible in the trench.

Decorative fence made of plastic bottles up to 1 m

The principle of making such fences is quite simple.

For this you need:

Under the wire and the holes on the bottle must match and be at the same level.

thread the wire through the post and bottle. And so on until the end of the row;
set the second row of bottles relative to the first in a checkerboard pattern. For better fixation, you can grease the bottoms of all bottles of the second row with glue;
with the help of bottles of various types and colors, you can create an original fence.

This is the first way to create a mini-fence. The second way is also simple. You will need to make so-called logs from several bottles, and then simply fasten them together.

Crushed stone or earth must be poured into the first row of bottles. And the bottom of the second row of bottles is cut off, and they are put on the bottles of the first row.

They also need to be covered with earth for the stability of the structure. Thus, it is possible to build a fence from plastic bottles for a garden above one meter.

To give a neat look to a log of bottles, put an inverted bottom on the neck of the last top bottle.

All logs are dug into the ground by 15 cm, and two metal wires or two cables are pulled on both sides so that the structure does not fall apart.

The third option for the middle fence will be. Bottles are attached to it with nails.

Capital fence made of plastic bottles for summer cottages

You can install this fence around the entire perimeter of your site, up to 2 meters high. To create such a grand structure, you will need a lot of plastic bottles.

The installation technology is as follows:

This completed the construction of the capital fence. To give an unusual look to the whole structure, you can pick up colored plastic bottles or create a smooth color gradient. In any case, with such a fence, all the neighbors and not only will know about your house.

Some people are interested in how to make a fence out of plastic bottles. This material is always available, because in almost every home their number is growing every day. Do not rush and throw out the garbage, you can make attractive and useful fences out of it. They have a number of advantages that can conquer the most demanding land owners.

Bottles can be handled with minimal tools and almost no effort. This feature remains an advantage that is difficult to refute. In practice, the main secret is precisely the versatility that can attract anyone.

Plastic is easy to shape and can be made into almost any shape. Accordingly, people are not in vain seriously interested in bottles. Through them, it will be possible to easily cope with your own fantasy and translate it into reality. What parts to choose for work?

Covers;
necks;
Canvas;
Bottoms.

A fence made of multi-colored plastic bottles is a godsend for lovers of brightness and extraordinary beauty. Without looking back at ready-made design projects and complex schemes, you can create a masterpiece by first reading the instructions.

Important! Ideally, you can use all the parts at the same time, but for this you will have to think over the finished project.

Lids

A fence made of covers will become an original, but time-consuming solution. Its beauty is undeniable, as manufacturers do not skimp on shades. Today, you can freely collect material in a variety of colors to recreate unsurpassed patterns.

Small fences are easily created using ordinary glue and a frame, and if you want to get a full-fledged fence, you need a reliable foundation. Separate covers are applied to it in certain places, gradually turning into details of a bright picture. Separate parts are attached to the pillars, turning into a full-fledged panel.

necks

The cork fence still remains decorative. The painstakingness of its assembly often scares people, so they should pay attention to the necks. They seem to be ordinary scraps that are cut off to make a clean sheet, but this is a mistake.

Necks can be used to fence flower beds and beds, where their low height will give additional decoration. Although some designers prefer to apply them in whole stacks, which are combined together to get long stripes. A kind of "fence" freely encloses a personal plot, while maintaining its lightness and attractiveness.

canvas

The body of the bottle is the main part. If you plan to make such a fence with your own hands, you should use it. By carefully cutting out individual parts, you can use them expanded or fix them inside the frame along the edges. The result is a solid wall that perfectly decorates the site and protects from unwanted views.

Plastic sheeting is not as reliable as polycarbonate or wood, but its cost remains zero. For this reason, families should consider choosing this option when they want to cope with complex work at minimal cost. Installation can be done with twine or pieces of wire, so even during it there will be no additional costs.

Important! Usually the canvas is used rolled up, but if desired, you can stretch it, increasing the total surface area.

bottoms

Garden bottoms are also used to fence flower beds, but this is not the only way. They are exhibited in a considerable area, which is freely assembled into a solid surface. Yes, the connection will require some effort and scrupulousness, but the result will be a kind of network that protects from other people's views. You can experiment with the length of the connecting staples and you will get amazing results. For example, one row is interconnected with paper clips 5 cm long, and the next 10 cm.

Advantages

When making such fences, you can freely choose colored containers. They remain an excellent option, which is directly related to certain benefits. What are the benefits?

Ease of operation;
Minimum weight;
No costs;
complex structures;
No need for a tool;
Weather resistance.

Who said that simple plastic bottles do not allow you to turn fantasies into reality? An interesting fence will be made in a short time and will not require powerful concrete pillars. Moreover, the installation will require little effort.

Step-by-step instructions suggest that the finished fence retains its external design for many years. That's how long it takes for the atmosphere to degrade plastic. It is not affected by the environment, so the choice remains unambiguous.

Durability and lightness are the main advantages of a simple material.

Flaws

Lids or bottoms can easily finish the surface or create a pattern on the ground. Although even small parts of plastic bottles have a number of disadvantages:

Poor wind resistance;
Mechanical fragility;
The painstaking assembly.

In the wind, the bottles quickly begin to dangle. When erecting a fence, you will have to take care of a reliable fastening that will eliminate such troubles. To achieve such an effect is difficult, but real. You will have to take care of the correct choice of design and additional reinforcement in advance.

Mechanical fragility requires accuracy. The surface easily cracks and deteriorates, so the owner will probably need a dense base or frame. Using this, it will be possible to make an attractive fence, which will remain in excellent condition over the years.

Using ordinary plastic bottles, designers create amazing fences. They are more like fabulous designs that immediately catch the eye. Choosing them, the owner of the site at the same time reduces their own costs, and also receives the necessary fence and attention.

The amount of garbage that each person "produces" is growing year by year. The problem is becoming global, as flying plastic bags and plastic bottles lying everywhere have already pricked everyone's eyes. I am burning, it turns out, you can help, and even for the benefit of yourself. In any case, this applies to plastic bottles. You will be surprised how diverse and, importantly, useful crafts from plastic bottles can be made in just a matter of minutes. Well, or hours ... Depends on the scale.

The buildings

PET (polyethylene terephthalate) is a thermoplastic from which bottles are made. It will be useful to know its physical properties:

density - 1.38-1.4 g / cm³,
softening temperature (t dim.) - 245 ° C,
melting point (t pl.) - 260 ° C,
glass transition temperature (t st.) - 70 ° C,
decomposition temperature - 350 °C.

Plastic bottles are very convenient to use, but harmful to the environment, since the polyethylene from which they are made decomposes for more than 200 years. The same property makes it possible to use practically waste raw materials as a building material. Craftsmen are already building houses from plastic bottles, as well as sheds, dachas, greenhouses, greenhouses, fences. Various technologies have been worked out - the approach is quite serious.

How to build a house out of plastic bottles

The main idea is to pour bulk material into bottles, screw them with caps and use them like bricks. Fill the bottles with sand, soil. Sand is preferable, as there is too much plant debris in the soil that can rot. It must be sifted, dried, bottled, well compacted, topped up even to the very top. Get kind of bricks.

To build a house from plastic bottles, you will need a solution that fills the gaps between the "bricks". There are options here too. It can be an ordinary mortar, which is used when laying brick walls, or clay mortar can be made. To keep the “bricks” in the wall until the mortar sets, they are tied with twine from the side of the covers. Later, these "grids" will come in handy when you plaster the walls. They turn out uneven, so alignment is indispensable.

We make a greenhouse, barn, greenhouse

From plastic bottles you can build a greenhouse or greenhouse. In this case, only transparent plastic is used, since it is necessary that the light passes in sufficient quantities. For the construction of a barn, on the contrary, it makes sense to choose darker plastic - it will be less visible what is inside.

The first technology - one to one

The second requirement for bottles as a building material is an even shape. This, you know, without recesses. Otherwise, it will not work to fold the walls so that they retain heat - it will “siphon” into curly cutouts. Remove labels from bottles and dry. It is also necessary to prepare pins or rods - bottles are strung on them. Their diameter is small so that the neck passes freely. Now you can start building a greenhouse / barn from plastic bottles.

For the construction of a greenhouse or a barn, poles are dug in at the corners. Frames are assembled from timber according to the size of the walls. These frames will be the base for the bottle walls. We collect them (frames) on the ground and fasten them to dug-in poles in a ready-made form. When making the frames, don't forget the doorway and windows.

We build a frame, cut off the bottom of the bottles, string them on a pin. From such "columns" we assemble walls, a roof

The construction process begins with cutting the bottom. We string the cut bottles on the pins, directing the necks in one direction. We insert the bottles with force so that they become very tight. Having collected a row of the desired height, we attach it to the frame. You can fasten with clamps, strips cut from metal, nails ... In any way available to you. We press the second row to the first so that there is a slight deformation. We fasten in this position. So, row after row, we collect all the walls, then the roof.

Using the same technology, you can make a gazebo. But there is already no need for tightness, so you can collect figured and colored containers. So it will turn out even more interesting (an example is in the photo).

The second technology - we sew plastic

Bottles will also need to be smooth, transparent or yellow. The central part is cut out of them, getting a square-shaped piece of plastic. Pieces are sewn together in long strips. In the strip, the pieces are arranged so that they are twisted in one direction. Then the strips are sewn into canvases. To make the canvas even, the strips are arranged so that they are twisted in different directions. As a result, they equalize each other. Finished canvases are nailed to the frame. On this, the construction of the greenhouse of their plastic bottles is over.

Such a plan "sheathing" for greenhouses perfectly tolerates winters, it does not need to be removed. Due to the firmware (many small holes), there is no absolute tightness, which allows you to adjust the humidity. You won’t be able to heat such a greenhouse, but it will push autumn back to you, and it will speed up the arrival of spring.

You can sew plastic for the greenhouse manually, but it's not easy. It will be easier for those who have non-capricious sewing machines. The old Podolsk cars cope with this task. Others may have problems.

Fence and fence

There are many ways to make a fence out of plastic bottles. If you need a serious monolithic fence, you can use the bottles as bricks. The technology is the same as when building a house. To avoid plaster (after all, there is a high risk that it will collapse) - select the color of the plastic to obtain the necessary rust. But in this case, you will have to look for "building materials" of the same diameter or lay out patterns from different sizes. In general, the creative process, no matter how you look at it.

You can also make filling for the fence from plastic bottles. Make a frame, say, from wood, and come up with a beautiful filling from curly containers and their parts.

Furniture from improvised materials: recycle plastic bottles

From plastic bottles you can make not only a house and a fence, they are also used as the basis for upholstered furniture. The idea is to use plastic containers instead of wood for the frame. With tightly screwed lids, they have a high bearing capacity, and assembled in blocks, they are quite able to withstand loads of up to 100 kg or more.

Bed made of plastic bottles… you need a good mattress, and the base is not too difficult to make

Although the furniture is made differently, the general algorithm of actions is the same:

Select "building material" of the same height, tighten the covers well.
Assemble the blocks of the desired size by fastening them with tape.
Having collected the base of the required shape, sew the cover. For softness, adding furniture foam rubber.

The whole trick is that the bottles fit one to the other very tightly and do not move. The slightest play can lead to the destruction of the structure. Therefore, collect the blocks slowly, carefully fixing. You can fold the bottles in layers, securing each layer in several places. For the inner layers, it is better to use double-sided tape - the fixation will be more reliable.

Ottomans / banquettes

The easiest way is to make an ottoman or a bench out of plastic bottles. We act in the order described above. It is necessary to find bottles of the same height. It is better if they are of the same shape - it is easier to collect. From plastic containers with tightly screwed lids, we assemble the base in the form of a cylinder. It is desirable that the radius of the base be greater than the height of the bottles - so the bench will not turn over.

Next, you need to cut out two circles from fiberboard, which will be slightly larger than the resulting base radius - this is the “bottom” and the base of the seat. We fix them with tape. We take furniture foam rubber and, according to the dimensions obtained, cut out the necessary spare parts. We sew a cover from furniture fabric, a color that matches the interior.

Such a bench can be not only round. It is quite possible to make a square. And so that this furniture is not too light, it can be weighted by pouring water. But water is not a very reliable business. It is better to pour sand. Heavier and more reliable.

Sofas, chairs, armchairs

If you need furniture of greater height than one bottle, proceed as when creating walls for a house. Find "material" of the same shape and height. The first bottle is left intact, the cork is screwed tightly (you can pour sand so that it does not turn over). The bottom of the other is cut off, put one on top of the other. The bottle goes a certain distance and does not move any further, no matter how hard you try. If the resulting height is enough - great, if not - put on the next one. In this way, collect the rows of the desired height, then fasten them into blocks.

There is another way. It is more reliable in the sense that the bottles are held not by compressed air, but by a mechanical stop. And the walls in them are double, which is also important. Minus - more work, more raw materials needed. The whole process in a step by step illustration.

We take a bottle, cut it approximately in the middle of the height (the upper part with the neck is smaller).
The upper part of the neck (the lid is screwed on) is inserted all the way into the bottom.
We take a whole one, of the same size and shape, insert it upside down into the prepared structure.
We cut the third one in about half and put the lower part on top (with a lid).

From such modules we assemble blocks of the desired configuration, fastening them with adhesive tape. Don't feel sorry for the scotch. You can first fasten two bottles, then assemble large blocks from double ones.

As you understand, with this technology, there are a lot of tops from bottles (half of the third bottle). They can be used to make other crafts from plastic bottles: flowers, more practical household items.

Flower making methods

The most common plastic bottle crafts are garden figurines and flowers. Read about garden figurines There are other interesting ideas, but a lot of interesting animals and insects are collected. And we will tell about flowers from plastic bottles below - these are probably those crafts from plastic bottles that give the most pleasure. The process is simple, the possibilities are many, the result is amazing.

You have probably noticed that the bottom of a PET bottle looks like a flower. All you need to do is find a bottle of a beautiful color, cut off the bottom of it. Now you already have a pretty flower. In the middle, you can add petals cut from the central part, a core from a plastic strip cut with noodles, or glue beads inside, but a little more about everything.

Using the power of fire

To work, you will need a marker, a lighter or a candle (it is more convenient with a candle). If available, take pliers, tweezers or pliers - hold the workpiece during processing. You will also need acrylic paints, you may need glue and beads. The whole manufacturing process comes down to several steps:

There are a lot of options here. Just start doing. Right away, it may not work out perfectly, but you will understand what and how can be corrected. See a few more pictures with step-by-step photos of the process of making flowers from plastic bottles.

The simplest

For beginner needleworkers, you can try making flowers from plastic bottles of simple shapes to decorate the garden. In this case, milk containers can also be used. In order not to paint plastic, look for colored ones. It doesn't matter if they are transparent or not. They can be combined, getting flowers of different shapes.

To create such flowers, use the part near the neck. It is cut to form petals. Next - warm up a little, giving the desired bend to the petals, a little paint, a core of a melted piece with a thread (a bottle of a smaller diameter, a pharmacy will do). Here is the buttercup.

Another option is to cut from the neck into strips of equal width - 1-1.5 cm, bend them (warming up a little at the base). Make the middle whisk from the side of a milk bottle or paint the transparent plastic with acrylic paint.

The middle is any bright. Here is a piece of cork, but you can cut it into thin noodles, twist it into a roll and then heat it. Get a fluffy core.

It's all about the shape ... Despite the imperfection, they decorate the site

The topic is really inexhaustible. Flowers from plastic bottles are made in a variety of ways. From simple and uncomplicated to very realistic. It's not so much about skill, but about different tastes and desires.

Useful ideas for the home

PET containers turned out to be such a good material that a lot of useful things are made from them. In this section, we have collected useful crafts from plastic bottles that can be used on the farm.

For the kitchen and beyond

If you cut off the bottom of a bottle with a capacity of 2-3 liters, you get a bowl or a bowl, and so that its edges are even, they can be melted on a heated iron. But so that the sole does not have to be cleaned later, use a special silicone pad. If not, you can do it through a sheet of parchment for baking.

Product container. Plastic is food grade...

From the same bottle we cut off the threaded part. 1-2 cm of plastic should remain around the thread (the edges are melted using already known technology). Now it will not be difficult to hermetically close any package: we pass it through the cut off neck, wrap it outward, twist the lid.

From the bottom of the bottles attached to the bar, you get a great newspaper shelf (photo on the right). You can also store umbrellas.

From plastic cut into strips, you can weave different shapes of containers. Bottles need an even shape, with thick walls. They are cut into strips of a certain thickness. It is necessary to cut in a spiral - as a result, rather long strips are obtained. If their length is not enough, they sew perfectly.

Lampshades

You can even make a lampshade, but on one condition: you will use similar crafts from plastic bottles in co lamps - only they almost do not heat up. Plastic is incompatible with other lamps. We will describe three ways to make a lampshade from a plastic bottle.

The first. You need a large bottle. We draw it into strips of the same width. At the beginning and at the end of each strip, we make holes with a heated soldering iron or a nail heated on fire. We insert scissors into this hole, cut. Get even stripes.

When the strips are cut, we also make a hole in the bottom, pass a thick fishing line through the neck, bring it out through the hole in the bottom, and fasten the decor on the reverse side. You can - a button, you can - a pebble of a suitable color. Now, pulling the fishing line, we get an interesting shape of a lampshade. You can put a light bulb in it.

Another lampshade was made using a similar technology. But then they cut a part of the bottle with a neck into strips, wrapped the strips and fixed them on the neck. To give the desired shape, the place of the fold can be warmed up a little over the flame of a candle or lighter. The resulting "flowers" are attached to the base. Here we get an unusual design.

They also make lampshades from bottoms. You need to find a sufficient number of identical bottles, cut off their bottom, glue them together using universal glue (choose transparent). The main thing is that it glues plastic and quickly hardens.

flower vases

Making a vase from a plastic bottle - what could be easier ... Just cut off the neck and you're done. But there is a technique that allows you to get patterned walls. You will need a soldering iron with the thinnest tip. Its power should not be too high. Then everything is simple: with the help of a heated sting, you burn out the patterns.

Magically! To make the picture appear brighter, we take acrylic paint and paint the resulting beauty. The paint can be in an ordinary can, but it is faster and more convenient to work with a spray can.

Here are the options...

Photo Ideas

Crafts from plastic bottles are such a vast topic that it is impossible to talk about everything. What is nice, knowing a few tricks, you can easily find out how and what to do by looking only at the photos. So here we put together a few ideas that we found interesting.

You can even make a boat ....

And it's just a decoration ....

Plastic bottles, which were considered recycled materials, have become a decorative element. Ideas to use the material - a lot. Large-scale projects are attractive. An example is a do-it-yourself fence made of plastic bottles. Given the practicality, low cost, it turns out that a plastic bottle is an ideal building material available on the farm. A lid is attached to the container. The number of options for the productive use of raw materials is increasing. In the article, the reader is offered a modest master class "using plastic bottles for summer cottages."

Fence of plastic container lids

We stock up on a sufficient number of covers, prepare a sketch, think over a color scheme, a scheme. A decorative fence will turn out to be the envy of advanced designers. When there are not enough caps, we turn to relatives, friends, neighbors with a request to help. Soon the desired amount of parts will be available.
The workflow is conditionally divided into stages that are performed in a certain sequence. It is easy to understand the procedure. A fence made of plastic bottle caps will turn into a local landmark and become a source of pride for the owners.

The first stage is preparation

We prepare the material, sort the covers by color. Old buckets or flower pots will do as storage containers. We work individually with the lid, we make 4 holes on the walls, clearly located opposite each other. Markup will help - draw perpendicular lines through the center of the circle. The size of the hole corresponds to the thickness of the wire, which fastens the span. We select the wire in accordance with the dominant color.

The second stage - calculations

Calculations are carried out after the preparatory stage. Experienced summer residents recommend making a fence made of caps from plastic bottles low, starting work from a small area (gate, short opening). For the accuracy of the calculation, we lay out the covers strictly according to the scheme. The drawing must correspond to the size of the span, it is repeated, alternated with a different version of the ornament.

The third stage - decorating according to the mosaic principle

The process of creating a cork fence is a creative activity, reminiscent of working with a mosaic. Mosaic art has been used since ancient times to decorate an old, unprepossessing fence. At this stage, the corks are fastened according to the pattern using pieces of wire. When fastening the parts, you should regularly check the finished canvas with the pattern. The slightest discrepancy will spoil the work.

The final stage - installation

The finished canvas is attached to the supporting bases. Wire is suitable as a fastener, but special fasteners in the form of clamps will make the fence more reliable. Each decorative canvas is attached separately, trying not to disturb the overall pattern. The finished cork structure can be mounted on the old fence without dismantling it.
Much can be said about the advantages of a decorative fence made of plastic bottle caps. Its main advantages: low cost and ease of execution are captivating.

original idea

It's time to pay attention to containers. How to make a fence from plastic bottles is described below. The owner can come up with a design scheme on his own, taking into account the characteristics of the surface of the earth, the zone to be decorated, and personal preferences. Details are attached in various positions: vertically, horizontally, depending on the conceived scheme.

Advantages and disadvantages

Any material for construction has advantages and disadvantages. Before you create a fence of plastic bottles with your own hands, let's get acquainted with the nuances.
Advantages:

The cost of raw materials. Plastic is not specifically purchased, money is saved. This is a free building material. Shipping costs will not be required. The raw material is profitable.
Waterproof qualities. Initially, the container is designed to store liquids, has excellent moisture-retaining and moisture-repellent properties. Plastic structures do not get wet, do not rot, do not lose color.
Light weight, easy to use. Designs made of plastic parts are light in weight. The material is plastic, easy to cut and process.
Product durability. It is known that plastic retains its qualities for 180 years.

This distinguishes it favorably from other materials.

Disadvantages of plastic products:

Unstable to the effects of physical force, break easily, lose their neat appearance;
A fence made of plastic bottles for a garden is a beautiful fence, but it does not provide reliable protection against thieves and intruders.

What is required for work

To create a masterpiece on a personal site will help:

Bottles in large quantities, preferably uniform in color and size;
Cutting tools - scissors with a knife;
Wire about 6 mm thick;
Drill, drills for metal and wood, the thickness of the drill corresponds to the diameter of the wire.

The first stage is preparation

Rinse containers and dry. Cut off the bottom. One vertical column consists of five units, the bottom of the bottle remains with the bottom. The cut off bottoms will come in handy later, they will serve as a structural element, you do not need to throw them away.
Bottles are put on one another, forming a column. The trick is this: bottle reliefs must match. The strength of the future fence, the accuracy of the facade depends on this.

The second stage - bottoms

A hole is drilled in the center of each bottom. They put on the wire so that the bottom is adjacent to the bottom, and the sections are in opposite directions. A column of five bottles is drilled through three times, the holes are made at the same distance, a wire will pass through them connecting the vertical picket columns. Two bottoms on the wire - the distance between the fences.
The number of columns depends on the span length and is calculated individually at the initial stage.

The third stage - installation

Iron supports are dug into the ground along the border line in advance, assembled spans are attached to them in such a way that the wire plays the role of a tightening element. The parts fit snugly together. A fence of colorless bottles looks like a crystal structure, delights and delights. The upper parts are screwed with lids, the product will acquire a finished appearance.

Conclusion

The use of plastic containers as a building material is not a new idea that has gained popularity among the population. Home-made fences decorate flower beds, highlight a zone or a specific territory, decorate beds, paths, garden paths, and perform crafts.

It will not be difficult to make an unusual fence, deep knowledge is not required here, it is enough to show patience, accumulate details, connect your imagination, get down to business.

The use of plastic bottles in the country to create various decorative elements today reaches the level of art. If we also take into account their incredibly high practicality and low cost, then we will get the ideal material for building a fence. Such structures will be discussed in this article.

General provisions

Why did PET bottles get such an unusual use for them?

Let's take a look at their features:

Low price . However, they are rarely bought on purpose, and usually they are a waste of buying a drink. Therefore, such material can be considered generally free.

Ease of Access. It also follows from the previous point: the purchase of soda, beer and even plain water along the way will provide you with an empty plastic bottle. If you do not throw it away, but put it aside, then after a while you will accumulate a sufficient number of products suitable for construction.
Water resistance. The initial task of the PET container is to store liquids in itself, so that it is not afraid of any atmospheric precipitation.

Ease of DIY use. Light weight, elasticity and ease of cutting with a conventional knife or scissors provide a lot of engineering possibilities.

Durability . To understand how long plastic bottle products can last you, let's look at a comparative table of the decomposition times of various materials in the open air:

Types of fences

mini fence

This type of fencing is used to separate different areas of your site.

Its installation instructions are very simple:

We fill the bottles with earth, sand, broken glass or other colored filler.

Tip: you can use the alternation of products of different shapes and combinations of different fillers.
So you can achieve greater aesthetics and diversity.

Bury them along the pre-applied markings.

wire fence

This design is most often used for fencing flower beds and beds with tall plants. Its installation requires a little more diligence, but it is also not very difficult and consists in stringing empty bottles on a wire.

Tip: if you want to make this type of fence more stable, it is recommended to fasten the containers in several rows.

Fence made of plastic sheet

A very interesting option is the use of the walls of large PET containers. Of these, you can build not only a fence, but also a canopy or even walls.

It looks like this:

We take the required number of bottles with a volume of two to ten liters.
Cut off the cones leading to the neck and bottom.
The resulting original bracelets are cut for convenience into two parts.
We fasten them to each other with a stapler, creating a solid plastic sheet.
We install it on metal posts or in window frames.

fence rack

Such a fence can already be safely installed from the street side of the site. First of all, we bury the pillars, mount the cross bars, but then you can go in two ways:

Cover fence

“Beauty requires sacrifice” - this phrase is ideal for the design in question. When creating it, only bottle caps are used, which may require from ten to fifteen thousand. Then you need to think over a suitable ornament and, in accordance with it, fasten the products with wire.

capital fence

This method is also characterized by a high level of labor intensity and the use of additional materials. But at the exit you, on the other hand, will get a solid wall of stone and plastic. In this case, the sand-filled containers play the role of bricks and are fixed with cement mortar.

Conclusion

We looked at how to use plastic bottles in the country when arranging fences. There are several ways, and they all differ in their complexity, installation method and end result. But in any case, you will get a cheap and unique design.