Apparatus for capturing fine abrasive dust. Apparatuses apr apr Technical characteristics of dust collecting units apr, apr

Recirculation dust collectors APR, APRK are designed for suction and purification of air from dry non-coalescing fine abrasive dust. The device consists of a housing, a built-in cyclone element for separating large fractions, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage. As a filter stage, the device can be equipped with either a filter sleeve made of imported needle-punched calendered material based on polyester fibers (APR-1200, APR-1600), or a cassette made of F9 filter paper (APRK-1200, APRK-1600).

Filter bag machines have a relatively small filter surface and therefore a low dust capacity. Devices with a cassette with a developed filtration surface have a significantly higher dust capacity, which allows for long-term operation of the device without a significant decrease in performance. On devices with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m³.

The devices are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s. Ideal for equipment with a low load factor.

Several local suctions can be connected to one device.

1. Fan

2. Cyclone element

3. Cassette (APRK)

4. Filter bag (APR)

5. Electric motor

6. Dust box

7. Inlet pipe

Specifications

Productivity, m3/h

Installed power el. Engine, kW

Dust collector volume, m3

Number of suctions, pcs. max

Noise level, dBA

Overall dimensions of the device in the package, mm

Overall dimensions of the cassette in the package, mm

Recirculating dust collecting units APR, APRK designed for suction and purification of air from dry non-sticking fine abrasive dust during metalworking of products on tool-grinding, grinding and metal-cutting machines.

The dust collecting apparatus consists of a housing, a built-in cyclone element for separating large fractions of dust, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage.

The following can be installed on the dust collector as a filter stage:

  • filter bag from imported needle-punched calendered material based on polyester fibers, in this case, the models of the units are designated APR-1200 and APR-1600;
  • cassette from filter paper (cellulose) of cleaning class F9 (dust cleaning efficiency ≤ 3 microns - 99%) or a polyester cassette of cleaning class M6 (dust cleaning efficiency ≤ 5 microns - 93%), in this case, the unit models are designated APRK-1200 and APRK-1600.

Filter bag machines have a relatively small filter surface and therefore a low dust capacity.

Currently, the production of APR industrial vacuum cleaners with a filter bag is temporarily suspended and only APR devices with a filter cassette are produced.

Due to the developed filtration surface, devices with a cassette have a significantly higher dust capacity, which makes it possible to ensure long-term operation of the device without a significant decrease in productivity. On dust collectors with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m 3 .

Dust collecting units APR are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s. Ideal for equipment with a small load factor of 0.1/0.2. Several local suctions can be connected to one device.

An example of the operation of the dust collecting unit APRK-1200 with a metalworking machine at the site of one of our customers is shown in the photo on the left.

Regeneration. APRK devices are manufactured only in the version with manual regeneration (cleaning). To clean (regenerate) the cassette, it is necessary to remove it from the device, clean the inner surface with a soft long-haired brush and thoroughly shake out the cassette, then blow it with compressed air from outside to inside.

Technical characteristics of dust collecting units APR, APRK

APR-1200 / APR-1200 APR-1600 / APR-1600
Productivity, m 3 / h 1200 1600
Installed power of electric motor, kW 1,5 3
Voltage, V 380 380
Dust collector volume, m 3 0,04 0,055
Weight, kg 75 98
Number of suctions, up to pcs. 1-2 1-3
Maximum length of the air duct (hose) from the place of dust collection, m 6 6
Noise level, dBA 74 76
Maximum dust concentration at the inlet, g/m 3 5 5
Dust removal efficiency, average particle diameter d=30mk, not less than, % 99,5 99,5
Cleaning class APRK with cellulose cassette F9 F9
Cleaning class APRC with polyester cassette M6 M6
on the APRK unit withcellulose cassette, rub. 83"000 108"700
Current selling price with VAT for 2019 on the APRK unit withpolyester cassette, rub. 85"600 113"300
Production time for any APRK unit: 20-25 working days after payment.
Selling price with VAT for the APR unit with a bag filter, rub. temporarily unreleased temporarily unreleased

  1. Fan
  2. cyclone element
  3. Cassette for APR or filter bag for APR
  4. electric motor
  5. Dust box
  6. inlet pipe

Overall and connecting dimensions APR, APR

Model of dust collecting unit H B d h L
APRK-1200 2250 560 160 670 700
APRK-1600 2300 710 180 810 755
APR-1200 2300 560 160 580 700
APR-1600 2400 710 180 605 755

Questionnaire and passport

Apparatus for capturing fine dust APR. APK.

Recirculation dust collecting units APR-1200, APR-1600, APRK-1200, APRK-1600 are designed for suction and air purification from dry non-sticking fine abrasive dust.

The dust collecting apparatus consists of a housing, a built-in cyclone element for separating large fractions of dust, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage.

As a filter stage, the dust collecting apparatus can be equipped with either a filter sleeve made of imported needle-punched calendered material based on polyester fibers (APR-1200, APR-1600) or a cassette made of filter paper of cleaning class F 9 (APRK-1200, APRK-1600). Filter bag machines have a relatively small filter surface and therefore a low dust capacity.

Due to the developed filtration surface, devices with a cassette have a significantly higher dust capacity, which makes it possible to ensure long-term operation of the device without a significant decrease in productivity.

On dust collectors with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m3. The devices are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s.

Ideal for equipment with a small load factor of 0.1/0.2. Several local suctions can be connected to one device.

Model

Productivity, m3/h

1200

1600

Installed power of electric motor, kW

Dust collector volume, m3

0,04

0,055

Weight, kg

Number of suctions, up to pcs.

Noise level, dBA

Dust removal efficiency, average particle diameter d=30mk, not less than, %

99,5

99,5

Fan

5. Dust box

2.Cyclone element

6. Inlet pipe

3. Cassette for APR or filter bag for APR

4. Electric motor

Model

H

B

d

h

L

APRK-1200

2200

APRK-1600

2270

APR-1200

2300

APR-1600

2400

Attention!

Our company supplies products from several manufacturing plants with a similar range. The manufacturer reserves the right to make changes to the design and model range of the supplied equipment. If necessary, you can ask our managers for more detailed information on a specific model.


Buy Buy in one click Find out the price of a product

Price from 55,000 rubles. (depending on unit size, configuration)

The use of APR-1200 and 1600 dust collectors allows air suction and purification from dry, non-coalescing fine dust and abrasives. MiroVent sells such equipment on favorable terms.

Design of recirculating dust collecting units APR-1200 and 1600:

  • frame;
  • built-in cyclonic element;
  • dust collector;
  • centrifugal fan with profiled blades;
  • built-in silencer;
  • filter stage.

Filter bags are installed as filters on the dust collecting units APR-1600 and 1200. For their manufacture, imported needle-punched calendered material based on polyester fabrics is used.

Models equipped with a filter bag have a relatively small filter surface, and therefore have a low dust capacity. Cassette analogues are characterized by a large indicator due to the developed filtration surface.

The proposed suction units are located directly at the machines and allow the connection of several local suctions. These models provide suction speeds up to 22 m/s. They are a suitable solution for production equipment with a load factor of 0.1/0.2.

Productivity, m³/h

Installed power of electric motor, kW

Dust collector volume, m³

Number of suctions, up to pcs.

Recirculating dust collecting units APR-1200, APR-1600, APR-1200, APR-1600 are designed for suction and purification of air from dry non-sticking fine abrasive dust. The dust collecting apparatus consists of a housing, a built-in cyclone element for separating large fractions of dust, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage. As a filter stage, the dust collector can be equipped with either a filter sleeve made of imported needle-punched calendered material based on polyester fibers(APR-1200, APR-1600), or filter paper cassette cleaning class F9 (APRK-1200, APRK-1600).

Filter bag machines have a relatively small filter surface and therefore a low dust capacity.

Due to the developed filtration surface, devices with a cassette have a significantly higher dust capacity, which makes it possible to ensure long-term operation of the device without a significant decrease in productivity. On dust collectors with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m3.

The devices are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s. Ideal for equipment with a small load factor of 0.1/0.2. Several local suctions can be connected to one device.

Specifications

Name Productivity, m3/h Cleaning class Dust collector volume, m3 Price, rub
APR 1200 160 1200 2,2 F9(EU9) 0,04 56 625
APK 1200 160 1200 2,2 F9(EU9) 0,04 60 875
APR 1600 180 1600 3 F9(EU9) 0,055 72 875
APK 1600 1600 3 F9(EU9) 0,055 81 375
1 000
1 225


CULTURE

How to germinate soybeans at home and how it is useful

How to germinate soybeans at home and how it is useful

12/10/2016 Vladimir Zuykov Save: Hello friends! Vladimir Zuykov is in touch. Today we will continue the topic. And in this article I will share with you how to sprout and use sprouts, in which ...
Garlic arrows - recipes

Garlic arrows - recipes

Garlic arrows are not deservedly ignored by gardeners and are almost always sent to the trash. This happens due to the fact that summer residents are not well aware of what vitamins and ...
Cottage cheese casserole with semolina and sour cream in the oven Delicious and fluffy cottage cheese casserole in the oven

Cottage cheese casserole with semolina and sour cream in the oven Delicious and fluffy cottage cheese casserole in the oven

Cottage cheese casserole is a very delicate dish. It is often served for breakfast and afternoon tea in kindergartens. At home, we are used to enjoying it with tea at any time of the day. Let's take a look at three of the best...
How to find out if a boy likes you: by what signs can this be determined?

How to find out if a boy likes you: by what signs can this be determined?

Reading time: 3 minutes How to please a boy? With age, we understand how relationships between people are built, but in adolescence, when the first love comes, it’s not at all ...
Recipes with garlic arrows

Recipes with garlic arrows

Irina Kamshilina Cooking for someone is much more pleasant than for yourself)) Contents The beneficial properties of garlic and its shoots have long been known. Eating the arrowheads of this plant improves...
Blue cheese - names, benefits and harms

Blue cheese - names, benefits and harms

An infrequent product on the table is blue cheese, about the benefits and dangers of which few people know. Those who wish to try the delicacy should familiarize themselves with its features, with how to use it correctly ...
Painful lump under the arm

Painful lump under the arm

A lump under the arm indicates damage to the sweat or sebaceous glands, damage to the lymph nodes. It is important to identify the nature of neoplasms, the cause of their appearance, to choose the right methods of elimination ...
Aloe injections: medicinal properties and contraindications Aloe vitamin in ampoules

Aloe injections: medicinal properties and contraindications Aloe vitamin in ampoules

Aloe Extract is a drug that regulates metabolic processes in the body. The drug stimulates metabolism, increases the body's resistance to extreme irritations,...
A bump appeared under the arm - what could it be, how to treat

A bump appeared under the arm - what could it be, how to treat

A bump under the arm is a fairly common occurrence that every person has met at least once. A bump is a small lump that can occur for a variety of reasons. The bumps can...
Flaxseed oil capsules: benefits and harms Flaxseed oil capsules benefits and harms

Flaxseed oil capsules: benefits and harms Flaxseed oil capsules benefits and harms

If you want to normalize the functioning of the body, lower cholesterol, then pay attention to the treatment with linseed oil. This product is known for its beneficial qualities and rich in vitamin...