Patterned rollers for decorative plaster. What are the rollers for decorative painting of walls (35 photos). The nuances of coating with a roller

It is easy and interesting to create a unique interior and comfort in the house with a patterned roller for wall decor. Artistic painting of any surface has now become available to everyone. Do you want to decorate the walls with a classic or original openwork pattern? You only need a few materials: paint in your favorite color, patterned rollers and a frame for them. This simple set will give each room its own charm. Any meager, bare walls in a couple of strokes will take on a unique look.

Most importantly, patterned rollers can be used by anyone. Even without experience in this area. A large assortment of rollers and detailed descriptions for each of them will help you make this difficult choice. In our store you can choose the goods to your taste. The cost of the rollers is justified by the quality and durability. The online store "Tsvetnoe" presents rollers only from the best time-tested manufacturers.

Pattern of new life in your hands

Patterned rollers you can buy in our online store, from the variety of patterns choose the one that will delight you every day. It is worth discarding all doubts and diversifying your life with bright colors and interesting patterns. Perhaps making this choice will be the most difficult stage in the creative process of decorating. Most likely, you will want to buy several patterned rollers for painting walls at once. The rest is a matter of technique. You will find similar information on the correct use of pattern rollers in the description of each offer. There you will find inspiration to get started. The process itself will already bring pleasure, because you do everything with your own hands. And the price of a patterned roller for wall decor will increase your desire to diversify the interior when it takes a minimum of time to work. Do not deny yourself such pleasure!

Decorative plaster is a common finishing material that allows you to get a durable, wear-resistant coating. With its help, buildings are decorated both outside and inside. The relief roller for plaster creates prints on its surface that imitate various types of surfaces. In this way, you can recreate the texture of wood, stone, "fur coat" and many other types. The resulting coating gives an aesthetic, attractive appearance to the room, emphasizes the originality of the design.

Classification of rollers according to the material of the contact surface

Nozzles for rollers for decorative plaster differ in the material from which they are made. Differences in the properties of the contact surfaces ultimately affect the final result. A detailed classification on this basis is presented in the table.

Varieties of nozzles for rollers

A large selection of decorative rollers enables a wide range of design solutions to be realized. It is quite easy to choose a tool for a specific case.

Separation of tools by the type of pattern they create

Plastering with a roller gives the surface a variety of patterns and textures. Depending on the patterns created and the clarity of the relief, the rollers are divided into textured and structural. The effect achieved will depend on the type used.

Textured plaster rollers are tools that create a design that resembles such common types of finishes as:

• fur;
• wooden;
• textile;
• marble and others.

Imitation of the required relief is achieved by using nozzles with an appropriate coating. Examples of the use of various materials for these purposes are as follows:

• to obtain a "fur coat", pile rollers with long threads are used;
• the surface under a natural stone is created by looped patterns on the contact part of the roller;
• leather and fabric rollers for textured plaster allow you to achieve a marble effect.

The most realistic patterns are obtained with uniform movements of the tool. The working solution is directly applied to the surface by the device, and at the same time the required texture is created.

When decorating with such rollers, it is necessary to consider:

• with wide nozzles, the desired effects are achieved more easily;
• bulges on the working surface are created by the depressions of the contact part of the tool, and the recesses on it are by its protruding elements;
• the plaster layer should be sufficiently plastic, but not fluid.

By width, textured products are divided into short (up to 0.3 m), medium (0.3-0.5 m) and long (more than 0.5 m).

Structural rollers for decorative plaster are distinguished by the fact that they are used after applying the finishing composition to decorate complex, repetitive structures (ornaments, patterns). The figure shows the possible appearance of such tools.

In most cases, the nozzles for such rollers are made of wood or rubber. The ornament on them has clear contours and is closed in a circle on the entire working part.

Such a tool allows you to achieve various volumetric effects. It is often used when applying a liquid composition from above to a finished surface. Because the clear relief of the nozzle entails the formation of an uneven resulting coating. This is due to the accumulation of plaster in the cells of the roller.

You can avoid this kind of trouble by using a tool with a fine relief of patterns or by working on a dried layer.

Textured and structural rollers allow you to achieve many different effects in interior design.

Self-made roller at home

You can make a roller for decorative plaster with your own hands. Such a solution will allow you to create a truly unique design, spur creativity. An exclusive view of the interior will be provided.

Depending on which surface it is desirable to simulate, do
following:

• obtaining a wood texture for walls is ensured by a wrapped bundle (it is better to glue it) with a rubber roller, and coils of unequal thickness are laid in different directions;
• a plastic roller wrapped with a narrow tape of compacted fabric also makes it possible to achieve a “wood” look on the surface to be decorated;
• if a smooth nozzle is pasted over with a cloth, then a textile ornament corresponding to its texture will be displayed on the wall;
• recesses and patterns can be cut on the interchangeable foam parts, which will allow you to create images that depend on your personal imagination, but you will need to work carefully.

The simplest option on how to make a nozzle with your own hands: you need to randomly wrap any existing roller with polyethylene, a rag, a rope or bundles. Individual results are guaranteed.

Technique for working with decorative plaster

To apply decorative plaster with a roller, you will also need some other tools in addition to it, such as a spatula, level, paint brushes, hard sponges, graters, smoothers. Of the materials, in addition to the mixture, a resin-based primer is required.

All work is carried out in a sequential manner. Its main steps are:

• prepare the walls: clean from dirt, old coating, exfoliated fragments and primed;
• the working plane is plastered with the first layer to a leveled state and, if necessary, painted;
• the next layer (after the previous one has dried) is applied decorative plaster of the required density;
• a tool with textured or structural nozzles quickly draws up a drawing;
• after 20 minutes, flaws are removed from the surface moistened with water with a trowel;
• two days later, minor defects are removed and painting is performed.

The photo shows the process of creating a design.

It is more efficient to perform plastering together: one applies the plaster, and the other gives the desired decorative appearance to the surface.

It is necessary to apply the compositions with structural rollers without overlaps, next to the previous passes. When working with a tool with a textured coating, strong pressure is not required: the smaller it is, the greater the effect. All movements should be carried out evenly, smoothly and as continuously as possible from the ceiling to the floor.

The nuances of coating with a roller

The application of plaster with a roller must be accompanied by certain rules. Work should be done as carefully as possible. The nuances of decorating come down to the following principles:

Compliance with the simplest rules allows you to apply decor with your own hands in the shortest possible time. The main thing is to constantly monitor the drying of the plaster solution.

Textured plaster with a relief roller is created quickly. This method of decoration makes it possible to decorate large areas of walls with a pattern. To achieve a unique result in the shortest possible time, an integrated approach to the entire process is required. It consists in observing the application technology, choosing the right working tool, and using high quality finishing materials. A big plus is the ability to independently perform all the work and make tools for applying decorative plaster.

An example of working with a relief roller is presented in detail in the video.

Textured surface finishing is one of the ways to give individuality to interior design. It is performed with special painting tools - textured and textured rollers, with which you can decorate the walls with artistic painting or create interesting decorative effects on them.

The quality of this type of finish depends on how carefully the preparation of the base was carried out, the coating technology was followed, and the roller itself was chosen correctly. Consider the types of relief painting tools and how to use them.

Application features

There are two ways to use a roller to decorate surfaces.

• In the first case, it is used as a tool to stamp various patterns: from the simplest to the most complex fantasy ones, similar to how, when wallpapering, the canvases are joined to each other to continue the pattern. The roller can be pressed with different force, resulting in a more or less pronounced relief.

• In the second case, using a rough roller or a tool with a patterned coat on the wall, they imitate the texture of various materials: brick, wood, marble or stone, and also make glazing - spectacular blurry spots.

To create a designer wall finish, you can purchase a ready-made decorative roller or build it yourself. So that you can better navigate the range of textured painting tools, let's take a closer look at their varieties.

Kinds

The design of a standard roller includes a metal rod-holder with a cylinder and a handle. The bases of the cylinder can be metal, plastic, rubber. Structural patterned specimens feature a rotating cylinder that draws ink, coupled with a rubber nozzle carved into the surface to create prints. The main difference between paint rollers is the coating of the cylinder.

materials

Various materials are used for the manufacture of coatings for cylinders, depending on what it can be:

• rubber or silicone with many recesses and protrusions of various sizes, due to which various decorative effects are created that imitate brickwork or relief with a pattern.
• foam rubber, which is convenient to work with water-dispersion paints and paint small areas. Its disadvantages include poor painting of an uneven plane, the formation of splashes when pressed hard and fragility.

• Styrofoam- This is a cheap analogue of a rubber roller. The disadvantage of polystyrene is susceptibility to mechanical stress, so such a tool will need to be repeatedly changed to a new one during work.
• Leather- with its help you can achieve a very beautiful effect that imitates a marble coating. Venetian plaster is best applied with a natural leather roller, as it perfectly copes with this task.
• Wooden- since wood is an environmentally friendly material, it is advisable to use such rollers for decorating children's rooms. They allow you to get a beautiful convex ornament on the surface treated with paint.

• plastic- when using it, the decorative mixture will lie as it should only on an absolutely smooth surface, so you cannot do without careful preparation of the base. In addition, plastic is prone to cracking due to prolonged use.
• Fleecy (fur)- both natural and artificial fur can be used as a coating - polyacrylic and polyamide, which have different lengths of villi. The degree of roughness and the depth of patterned inclusions on the treated surface depend on the length of the threads.

Invoices

Decorative rollers are distinguished by a variety of structures, due to which the final ornaments are obtained. The purpose of some tools is to imitate the texture of natural materials, while others are simply to create an arbitrary pattern.

According to the method of application, they are:

• Textured products. For their manufacture, hard or soft rubber is used. When a raw plastered surface is rolled with such a tool, it acquires relief. Using rollers with different patterns or just a rough cylinder, you can get the texture of a wide variety of materials from fur and wood to textiles and stone chips and even bamboo fiber. A fur coat provides the effect of multidirectional fibers, a rubber-coated roller allows to imitate a natural stone, where a special looped pattern is cut out, and traces of bubbles remain after the spongy tool.

• structural fixtures. With their help, a complex repeating ornament is applied to the plaster, for which the stencil roller is intended. A feature of use is the application of a finishing coating on an already finished surface, for example, a painted or evenly plastered wall. Decorating begins when the plane is completely dry. The most beautiful ornament is obtained if you use a figured roller with a certain pattern.

effects

Decorative surface finishes offer endless possibilities for creativity. Of course, for these purposes, the easiest way is to use ready-made textured design rollers, which will be ideal helpers for creating all kinds of complex and very beautiful decorative effects:

• "Diagonal" is an unusual abstract pattern of slanted lines.
• "Blots" are picturesque spots with arbitrary outlines resembling spreading drops of liquid.
• "Rain" - despite the name, due to the presence of chaotic lines and ramifications of the pattern on the cylinder, visually this effect looks like a fancy floral pattern.

photos

• “Frosty Morning” is an original ornament that resembles a pattern of frost that remains on glass in frosty weather in winter.
• "Rhinestones" - a symmetrical ornament of large imitations of precious stones arranged in rows.
• "Blossoming Meadow" is a spectacular fantasy floral ornament.

No less beautiful effects are obtained when using rollers in combination with other tools for decorative and finishing work. For example, to decorate a wall with a pretty polka dot pattern, a standard roller is used together with a stencil - purchased or made independently from thin plastic.

To create the “bamboo” effect, the base is covered with a white decorative mixture using a trowel. It is also used to form the background pattern. Until the main layer is dry, a pattern imitating bamboo shoots is created with a trowel or spatula. Then the wall is treated with decorative wax using a paint roller. And at the end, point accents are placed with a silvery decorative varnish to make the pattern more expressive.

Glaze - blurry spots of deep shades that differ in saturation are made by painting the wall with a base color and winding a chaotic pattern with a dry or wet cloth or cellophane. To create original textures, you can use a sponge to create a soft spotted ornament or a brush for spectacular splashes.

An interesting effect is obtained from arbitrary prints on the wall of their own palms.

How to choose?

A variety of painting tools for decorative painting can complicate the choice of roller. To avoid mistakes when buying, we suggest using the tips of masters who have been engaged in decorative and finishing work for more than one year.

What should be done:

• Check the quality of the working part of the roller and its resistance to deformation. To do this, you need to significantly crumple the coat, and then assess the condition. Strong dents on a fur coat are a reason to refuse to purchase such a roller.

• When choosing a long pile roller, it is necessary to visually inspect the fur coat for falling out fibers that will definitely stick to the painted wall, which looks unattractive.
• Make sure the clasp is reliable - the bracket that acts as the basis of the tool. Soft clasps deform faster, which not only reduces the life of the roller, but also negatively affects the quality of the finish.

For painting walls, a product with a standard short handle is quite suitable, while for finishing the ceiling you should already purchase a tool with a special telescopic handle.

What to look for when buying:

• Structural rubber roller - in this case, it is important to evaluate the quality of the rubber and the operation of the cylinder. A good tool has a resilient coating and an easily scrolling, non-vibrating roller. The optimal solution for creating the perfect pattern is a tool that has a lubricating cylinder and a hopper, which allows you to stretch the entire pattern without having to interrupt to saturate the coat with paint;
• Textured tool with a foam coat - here you need to make sure that the selected sponge coating has pores of the required diameter to obtain a decorative effect of bursting bubbles or lunar craters;

• Leather embossed roller - since it is mainly used to work with Venetian plaster, then try to consider only those products that have a natural leather coating. It is impossible to make prints on a plastered base with devices from synthetic analogues - once, and they are able to dissolve - two;
• Pile roller - here you need to be guided by the length of the villi, which is from 0.2 cm to 2.5 cm. The effect of a strong "shaggy" wall is created with a long-pile roller;
• Pattern tool - the pattern of a figured stamp is of great importance: the most beautiful ornaments are obtained through a combination of thin lines and jumpers present in the pattern.

You can buy a stencil or texture roller or do it yourself. The usual tool for painting is supplied with a home-made cloth, suede, paper or sponge coat, securely fixing it with threads. This device is good for applying chaotic spotted ornaments.

Surface preparation

Wall painting is the type of finishing work that everyone can master, the main thing is to prepare the surface with high quality. If you neglect the pre-treatment of the walls, then you can not count on the quality and durability of the finish.

Work order:

• Clean the surface of the old coating, for example, wallpaper.
• Smooth out irregularities on the plaster or concrete base with a grinder.
• Prime the wall and seal the cracks, sinks, chips with a plaster mixture.

• Align the base with finishing putty and sand.
• Dust the surface with a vacuum cleaner or herbal brush.
• Re-treat the base with a primer to increase adhesion to the decorative coating and reduce its consumption.

When the wall is completely dry, you can start decorating.

Paint application

For many beginners just entering the world of repair, it seems that using a paint roller, given its elementary design, is as easy as shelling pears. Nevertheless, working with paintwork materials (LKM) requires some knowledge, without which a perfect finish, alas, is impossible.

So, first, the corners are painted with a brush or a corner roller. LKM is thoroughly mixed with a construction mixer at low power. Fill the cuvette with paint and roll the roller in it with back and forth movements so that the fur coat properly picks up paintwork. At the end, a tool is passed along the inclined corrugated base of the cuvette to remove excess coloring composition and distribute it evenly over the working part of the roller - a fur coat.

To determine the coverage area of ​​the working surface with the amount of paint that the roller absorbed at a time, you need to roll out the paintwork on the wall to make a square. In your mind, you need to break it into several strips, focusing on the width of the fur coat. Suppose we are dealing with five stripes.

When creating an original interior in a room, especially when it comes to decorating a wall covering, experts use various kinds of tools in their work. Among this variety, special attention should be paid to textured rollers, which are far from the last place in the list of popular painting tools.

What is it needed for?

Decorative rollers are used for applying various patterns and reliefs. A similar result is achieved thanks to various textures embossed on their nozzles. Due to the ease of use, the implementation of interior solutions in the design of the premises will be within the power of anyone and without the additional help of specialists. The main positive feature of the rollers is the fact that the cost of their purchase pays off due to the long service life, as well as versatility.

To work with a textured roller, any paint is suitable. In some cases, it is used for plaster. Therefore, before buying a particular model, you should study all the varieties of this tool.

Kinds

Previously, in order to give the surface the necessary relief, they used all kinds of improvised items - a stiff brush, comb, sponge, knitting needles. To date, the existing range of construction tools makes it possible to pick up a roller with a ready-made pattern for decoration. With its help, a real relief pattern is created on the wall, ceiling or interior items and furniture.

All types of rollers are united by their simple design.

It consists of four components:

• pens;
• rod;
• roller;
• nozzles.

Textured rollers can be worked in several ways. The first option - stencil - is to use a decor tool by stamping an image. The second method involves processing a wall or ceiling with a rough roller to obtain a pronounced result.

Depending on the type of nozzle surface, several types of tools are distinguished.

The nozzle can be made from the following materials:

• silicone;
• rubber;
• foam rubber;
• plastic;

• the cloth;
• leather;
• wood;
• Styrofoam

Rollers with a silicone or rubber nozzle with a pattern will create a “wallpaper-like” pattern on the wall. There are rubber nozzles with a relief on the surface, when working with which you can get the effect of "rain" or "peas".

Foam rollers for high-quality and beautiful painting should be with deep pores of different sizes, due to this, traces are formed on the wall in the form of peculiar craters or bursting bubbles. A tool with a plastic cylinder leaves non-trivial drawings on the walls, forming various kinds of bulges.

The soft texture of the nozzle when plastering sets the effect of a "fur coat". Decorative fabric rollers with a crinkled texture imitate marbled finish, to imitate natural stone, use a tool with a leather nozzle.

Fleecy rollers create a "fur" effect. The size of the pile and the material of such a tool compares favorably with its diversity. The raw material for the manufacture of the nozzle can be both natural fur and polyamide threads.

Wooden rollers will serve perfectly for a pronounced figured decor. A hard coated tool would be the best option. The cost of such a painting device is higher, but this is easily offset by the possibility of its reusable use, as well as environmental friendliness.

The “brick-like” effect on the wall will be obtained when working with a foam tool, the surface of which is divided into rectangles in a checkerboard pattern. The pattern in the form of bamboo stalks is obtained from rollers with corresponding cut grooves.

All types of rollers - rubber, leather, sponge and others are applicable for work with a flat surface. However, rollers with rollers made of wood and metal are considered the most suitable for plastering. They are not recommended for use with oil paints, as they are not able to maintain a sufficient layer of paint on the surface.

To upgrade ordinary foam rollers, you can use twine or pieces of foam rubber, placing them diagonally or in any other direction. This method will help create a natural pattern, for example, repeating the structure of the bark of a tree. To create a frosty morning ornament, you should use some textured crumpled fabric (cotton, linen). The roller is wrapped with the selected material, and then such a texture tool is used in surface decoration.

When purchasing a roller, always take into account the amount of future work. For large areas to be painted, a tool with a long handle and a large roller is ideal. The stencils are rolled and the corners are processed with a smaller roller.

Dimensions

Due to their simple design and good functionality, rollers are an almost indispensable attribute used in the process of decorating interiors.

By size, they are divided into the following types:

• mini - with their help, work is carried out in small areas, the rollers are convenient for applying stencils, have a width of up to 150 mm;
• midi - the most popular type of instrument, versatile in use, its width is 150-200 mm, with a diameter of 50 to 90 mm;
• maxi - the tool is used to work on uneven areas, with aggressive materials and structural types of paints. Designed for painting large areas, so it is also called a facade roller. Its minimum width is 250 mm, diameter - from 80 mm.

As practice shows, the greater the width of the tool, the faster the process of applying the coloring composition will take place. But, armed with a narrower tool, it becomes possible to obtain a clearer structure of the pattern as a result of the work.

The result of the work done largely depends on the quality of the purchased goods. Until recently, tools in this category were mandatory tested for compliance with GOSTs. Textured rollers by manufacturers of construction tools are now offered in large quantities and assortment.

Features of the work

It is not enough just to acquire a good quality tool to implement the plan. The main thing is to understand all the intricacies of painting walls or ceilings with your own hands.

How to work with a textured roller is a question that may seem strange, since the simplicity of the design of the tool speaks for itself about the impossibility of making any mistake in the process of applying paint. However, during use it will become clear that there are several important rules, the observance of which guarantees an ideal result.

Work technology:

• Before painting, you need to decide on a plan for its implementation. It is recommended to start work from the corner of the room, located by the window.
• The paint must be poured into a special container of a suitable size so that it is convenient to dip the tool into it.
• Each bath is provided with corrugations designed to roll the paint roller over them to evenly distribute the composition over the surface of the nozzle.
• You don't need to press hard on the tool.

• The technology of using a textured roller involves applying the second layer of the coloring composition only after the first has completely dried.
• With full painting, special attention must be paid to the absence of poorly painted areas.
• Apply paint with a roller to paint the entire wall should be from the bottom up and in the opposite direction.
• It is best that the movement of the tool be directed slightly diagonally away from you.

Painting the ceiling should be approached with extreme care, since such an area is much more difficult to work with. Almost everyone is interested in what kind of tool should be used when working with the ceiling.

When buying a roller for these purposes, it is worth emphasizing the following points:

• for a rough ceiling surface, it is worth purchasing a tool with a maximum pile length;
• the tool stem for greater convenience should be from 30 to 40 cm;
• if the nozzle has a seam, stripes will definitely remain on the surface to be painted, as a result, the surface cannot be made perfectly smooth and even.

Compliance with simple rules when painting walls and ceilings using a textured roller will help to avoid uneven painting and paint overspending. Before starting work, you need to be sure that all the necessary accessories are available. In some cases, for example, handle extensions or mini rollers may be needed.

Texture rollers require strict adherence to technology and the time allotted for the paint to dry.

Instructions for independent work:

• the working surface must be carefully leveled with putty, cleaned of dust and other contaminants, and also primed;
• the working area is separated along the borders with masking tape, the floor and furniture are covered with film, newspapers or other materials;
• work is done from top to bottom, the adjacent strip should not overlap;

• having reached the ceiling, the roller is pressed to the top, then the wall is processed with a standard pressing on the tool;
• corner areas are brushed;
• too convex pattern is easily corrected with a grinding grid.

Painting walls with a roller requires care, slow and smooth movements. The use of textured rollers in the work reduces the time for repair work, improves their quality, but, most importantly, allows you to transform the interior of the room and realize any ideas.

In the old days, plaster was used only as a base for paint. The walls were decorated with paint. But progress does not stand still, and today it is fashionable to cover the walls with decorative plaster. The process of creating a surface using such plaster is not difficult.

If you strictly follow the technology and use structural rollers, then you can do decorative plaster with your own hands. If earlier only fur rollers were used as a tool for painting, today there are rollers for decorative plaster, with which you can get walls with different textures.

Textured rollers, which are now used for decorative plaster, appeared with us thanks to Europe. Namely, they began to use them there to create three-dimensional images on plaster, reminiscent of gypsum stucco. With their help, various textures are created that have volume and depth.

The roller is a tool that consists of a handle on which a coated cylinder is attached. The cylinder can be with a plastic, silicone, metal or rubber base. Fabric or foam rubber can be used as a covering.

There are leather textured rollers and wooden piecework. Rollers for decorative plaster can have different widths and are used depending on the tasks that need to be solved.

On a textured rubber roller, the pattern is closed on the surface of the cylinder. At one time, these rollers were used for applying prints for painting on wallpaper.

In the future, they began to produce wallpapers with ready-made drawings, so the need for this tool disappeared. With the advent of decorative plaster, the demand for them reappeared.

True, they cannot be used to apply a textured pattern due to uneven application, since the pattern on them is not pronounced.

But they are good to use for drawing a picture on the finished surface, when the plaster dries a little, about 20 minutes after coating.

In order for the drawing to print well, some rules must be observed. Movements should be uniform and directed from top to bottom.

Each next strip must be started from the place where the previous one ended, so that the drawing does not interrupt.

Imitation of various surfaces

With the help of textured rollers, you can create a marbled texture, brickwork, various floral ornaments, abstraction, etc., for this you just need to choose the right tool. Therefore, it is necessary to figure out how the appearance of the surface of decorative plaster will change from the selected relief roller:

• a roller covered with pile creates a surface with imitation of fur. The shorter the pile, the smoother the surface will be. If the plaster is applied to brick or concrete, it is better to use a roller with a pile of at least 1.8 cm;
• if it is necessary to obtain a three-dimensional pattern that will protrude above the surface, then the pattern on the cylinder should be pressed in, applied in the form of recesses;
• if you need to get an extruded pattern on the wall, then the working surface of the cylinder should have a convex image;
• to create a longitudinal texture, patterns in the form of waves are applied to the cylinders, there is a wide variety of such patterns;
• an imitation of natural stone is created by a roller with loops in the form of ears applied to it.

To get an imitation of brickwork, it is necessary to apply channels on a rubber roller that has a flat surface, which will divide the surface of the cylinder into three equal parts. Then, to obtain an imitation of one brick, transverse notches are made in a checkerboard pattern.

If you take a roller with a nozzle made of crushed fabric or leather, then the plaster will have an imitation of a marble surface. When drawing a picture, you should move evenly over the surface, trying not to break away from it for as long as possible.

You can get an imitation of wood fibers by winding a rubber cord around a rubber roller, winding the turns in different directions. By changing the direction of the turns, you can get different patterns.

Implementation of textured cladding

Currently, building stores offer a wide selection of different tools for applying decorative plaster, they differ in the material of execution and a clearly applied pattern.

Applying a certain pattern to the plaster is a creative process, so it's always nice to do something yourself and embody your fantasies in the form of unique patterns.

To implement this idea, you need to prepare a rubber roller, a piece of rubber centimeter thick. You can use ordinary erasers, but this is in case there is no rubber. In addition, you will need a special glue for gluing rubber products.

From the prepared rubber or erasers, various figures and patterns are cut out. For example, you can cut out a figure in the form of a leaf of a plant.

These figures are glued to the roller, taking into account the fact that there will be a continuation of the pattern. As a continuation, you can cut out a flower and glue it next to the leaf, so you can create any ornament by adding stems. It is important that the pattern is applied continuously over the entire surface from edge to edge. Machines, which consist of a roller and a metal rod, are available in different sizes:

• short up to 30 cm;
• medium from 30 to 50 cm;
• long over 50 cm.

For the convenience of work, tools are made with long handles from 70 cm to 4 meters.

In order for the drawing to turn out to be of high quality, it is better to round the edges of the rubber figures. In this case, the glued figures will sink into the plaster smoothly and will not spoil the applied pattern with sharp edges.

You should not apply a pattern to a surface that has just been covered with plaster, as the grout will clog into narrow cracks and remain on the roller. Therefore, it is better to wait 10 minutes (depending on the decorative plaster used) so that the solution dries out a little.

You can cut any patterns on a foam rubber roller, this is a rather laborious process, but the result is impressive.

An interesting texture is obtained by wrapping the roller with an overlap with a rope or a thin cord. You can get a unique pattern on the plaster if you wrap the cylinder with a plastic bag or an ordinary vegetable net.

Watch a video selection of wall decoration:

Technique for applying cladding and drawing

To apply the finishing material, the surface must be prepared. Clean it from the previous coating. Then it should be primed, preferably with a deep penetration primer.

If it is supposed to apply two layers of plaster of the same shade of different saturation, then first the surface is leveled and the first layer of the desired color is applied.

Next, a decorative layer is applied. If there is a need to emphasize the exact boundaries between the layers, you can use masking tape. Before applying a layer of decorative plaster, it is necessary to tint the composition well and bring it to the required consistency.

Technique for applying plaster

Apply layers with smooth movements from top to bottom.

When working with a roller, in order for the drawing to be applied with high quality, the following rules must be observed:

• it is impossible to press hard on the roller during operation, as this will interfere with the creation of a textured and three-dimensional pattern;
• movements should be smooth and sliding;
• if desired, the protruding parts can be coated with acrylic paint. Depending on the color scheme used in the interior, you can cover the depressions or protruding parts with golden or silver paint. Application of acrylic paint is best done when the plaster is completely dry after about 48 hours.

The process of obtaining various patterns can be a lot of fun, because thanks to this you can decorate the walls so that the room will have its own individual style. The whole family can be involved in this process so that everyone can show their imagination and contribute to the design of the room.