Water purification systems in the apartment. Water filters in a private house: are they needed and how to choose? Buy water filters for an apartment

Often, tap water leaves much to be desired, it is harmful to health and negatively affects the taste of drinks and dishes.

There are 3 ways out of the situation:

1. Humble yourself.
2. Buy bottled water.
3. Put a filter.

The most common type of filter is under the sink. This is a water purification system that is installed under the kitchen sink on the floor or wall. With the help of flexible connections, the filter is connected to the water supply, a separate tap for filtered water is displayed on the countertop or sink surface.

What are sink water filters?

Flow filters

The design consists of 2-4 modules connected in series with each other. Water goes through several stages of purification, each filter has its own purpose:

• Mechanical cleaning filter. Removes solid particles from water. It is a cellular fabric or mesh material. Cell size - up to 30 microns.
• Fine filter. The carbon filter, which retains particles up to 5 microns in size, effectively fights odors.
• Ion exchange filter. Its main purpose is water softening. Calcium and magnesium ions are replaced by sodium, chloride and other soluble compounds. The cartridges contain both artificially synthesized resins and sulfonated carbons.
• Iron-free elements. The filter contains chemicals that help bind the iron and oxygen atoms. Metal oxides form a precipitate, which remains inside the filter.
• Antibacterial filter. Purifies water from bacteria and viruses, manufacturers claim that silver ions are used in the manufacture of such filters. Less commonly used ultraviolet lamps.
• Combined. They are almost never used in multistage systems, only in single-flask filters. One cartridge combines several types of filter elements.

Important! The composition of tap water must be taken into account! The harder it is and the more impurities it contains, the more often you will have to change cartridges.

Reverse osmosis systems

The design of the reverse osmosis system is similar to the flow one, the difference is in additional modules and advanced filters. Most often, membrane filters with micropores are used in such installations. Almost all organic and inorganic substances remain on the filter, pollution is removed by the flow of water into the sewer. By performance, filters are:

• 50G - this marking indicates the rate of water purification up to 200 liters per day.
• 100 G - productivity is about 400 liters per day.

Important! Reverse osmosis filters purify water longer than flow ones, so they are often equipped with tanks for storing filtered liquid (up to 10 liters).

In reverse osmosis systems, there must be a polypropylene filter (coarse cleaning), a carbon or iron-removing element, less often an ultraviolet lamp. Only then does the water pass to the membrane filter. It is very important that the water supply system has normal pressure (1.5-3 bar). If the pressure is low, you will have to additionally purchase a pressure pump.

Since the water that has passed through the reverse osmosis system is close in composition to distilled water, it will not bring benefits to the body. The necessary salts and compounds are simply removed from it. The filter-mineralizer restores its structure and saturates it with minerals. The liquid is enriched with magnesium, calcium, sodium, silver ions, sulfites, chlorides, fluorides. A high-quality filter allows you to get water in composition close to mineral.

How to choose a water filter for washing

The first thing to do is to hand over the water for analysis (to a sanitary and epidemiological station or a testing center). In the laboratory, the sample is checked for the presence of heavy metals, salts, organic impurities, and pathogens. Characteristics of color, PH, transparency, smell and others are determined. You will be given a detailed document on the basis of which you can select a cleaning system.

What problems does a water filter solve?

Most often, users encounter the following problems:

• The increased content of chemical compounds (chlorine, heavy metals and others). The cleaning system must have a polypropylene cartridge (mechanical), carbon and iron removal.
• High water hardness. It is better to give preference to a reverse osmosis system. On flow filters, you will have to change cartridges almost every month - this is extremely unprofitable. In osmotic systems, a membrane filter does an excellent job of this task.
• Increased organic content. The water may contain microbes, viruses, bacteria, which will help to cope with a disinfecting filter. This is a silver ion cartridge or an ultraviolet lamp. A reverse osmosis membrane filter is also useful.

What to look for when buying

When buying a filtration system, you should also pay attention to other criteria:

• The number of purification levels (from 2 to 6) - the more - the better quality water you get. If the water is slightly different from the norm, a 3-stage filter is enough.
• Performance. With flow filters, everything is clear, but the reverse osmosis system purifies water more slowly. The manufacturer must indicate the number of liters per hour in the passport.
• Quality. The materials from which the equipment is made must comply with environmental and sanitary standards. Do not be too lazy to ask the seller for certificates.
• Availability of accessories. On the model of well-known manufacturers, it is easier to find replacement filters and spare parts.
• Dimensions, the presence of a tank for storing water.

The best manufacturers of water filters for washing water

TOP 5 best filter manufacturers

5. Barrier (Russia). Produces filters for over 15 years. There are 4 own enterprises and a research center. Brand of CJSC "METTEM Technologies". The product line includes flow, osmosis systems for domestic and industrial purposes. Of the minuses, users note a poorly developed customer service.

4. Geyser (Russia). The first domestic manufacturer of water filters. The company was founded in 1986. They produce both flow filters and reverse osmosis systems. The produced goods are exported to 45 countries of the world. Components interchangeable with TM "Aquaphor".

3. Aquaphor (Russia). The company was founded in 1992 in St. Petersburg. Production is located in 3 more cities. Products are exported to more than 20 countries. The range includes both flow-through and reverse osmosis water purification systems. Drinking water machines are also offered - the same reverse osmosis technology, but the models take up less space and require less pressure in the system - 2 bar.

2. Aquafilter (Poland). This company has been producing water filters since 1994. Products are exported to 45 countries. The main production facilities are located in Poland and Germany. A wide range of models: from simple to industrial water purification systems. Advanced technologies are used, including micro- and nanofiltration.

1. Atoll (USA). The first filters were brought to Russia in 1994. Now production facilities are located not only in the USA, but also at the Russian plant "Comintex-Ecology" (since 2004). Production has the international NSF certificate. The range includes flow and reverse inspection, main filtration systems.

Also known in Russia are brand filters Praktik (Germany), Novaya Voda (Ukraine), Zepter (Germany) and others.

Rating of water filters for washing

TOP-5 flow filters

Barrier Expert Complex

The average price is 3500 rubles. The filter is recommended for hard water with a high iron content. Cartridge types: polypropylene, ionized resin and carbon with silver ions. Working pressure - up to 7 atmospheres. Average productivity - 2 liters per minute. Water temperature - from +5 to +30 degrees. The system well purifies water from heavy metals. The filter itself is compact, cartridges are easily and quickly replaced. Among the shortcomings, users note the high cost of replacement cartridges, it is not always possible to find accessories in the store.

• Performance - 4
• Water purification quality - 5
• Availability of components - 4
• Overall score: 4.5

New Water Expert M420

The average price is 5400 rubles. 5-stage cleaning, 4 filter elements. Types of filters: carbon with silver ions, ion exchange resin, coal with coconut shell, membrane. It is completed with the improved ceramic crane. There is an ultraviolet membrane. Compact device, capacity 1-2 liters per minute. The recommended water temperature is +5 - +35 degrees. High resistance to water hammer. Cleans water of medium hardness well. Of the minuses - cartridges are expensive, not suitable for very hard water.

• Performance - 4
• Water purification quality - 5
• Availability of components - 5
• Ease of installation and maintenance - 5
• Overall score: 4.75

Aquaphor Crystal Quadro

The average market price is 6500 rubles. System of 4 filter blocks, throughput - 2.5 liters per minute. It is intended for purification and softening of very hard water. Water temperature - from +5 to +40 degrees. Pressure - from 0.6 to 6 atmospheres. There are 5 options for completing the modules, including very fine cleaning. The model has small dimensions, and the cartridges are replaced along with the flask. Users note weak fastenings and the high cost of replaceable elements.

• Performance - 5
• Water purification quality - 5
• Availability of components - 5
• Overall score: 4.75

Atoll A-313E Lux

The average price is 5000 rubles. Suitable for water treatment of medium hardness. Three-stage system with a mechanical, iron-removing and carbon filter. Operating temperature from +2 to +42 degrees. Withstands water hammer, working pressure - up to 6 atmospheres. Throughput - 2 liters per minute. It cleans water well, a good resource of cartridges. Components are not cheap, but are sold in most specialized stores.

• Performance - 5
• Water purification quality - 5
• Availability of components - 5
• Ease of installation and maintenance - 5
• Overall rating: 5

Aquafilter Excito-B

Estimated cost - 7000 rubles. Seven-stage cleaning system (5 cartridges, 2 of which are double action). Working pressure 4 atmospheres. The recommended water temperature is from +2 to +42 degrees. It cleans well even very hard water, it is equipped with a membrane filter for very fine cleaning. The average throughput is 3 liters per minute. Quite compact, filters are enough for 4000-6000 liters of water. The membrane needs to be changed once a year. There are no special complaints from users, except for the high cost of components.

• Performance - 5
• Water purification quality - 5
• Availability of components - 5
• Ease of installation and maintenance - 5
• Overall rating: 5

TOP 5 reverse osmosis systems

Geyser Prestige 2

The average price is 6000 rubles. Budget version of the reverse osmosis system for water of medium hardness. Three-stage cleaning system (mechanical, iron-removing, membrane filter). Faucet and fittings included. Productivity - 300 liters a day. The recommended water temperature is from +4 to +40 degrees. Working pressure 1.5-8 atmospheres. The pre-treatment unit replaces the three-stage pre-filtration typical of reverse osmosis systems. Of the shortcomings - weak fastenings, no water tank.

• Performance - 5
• Water purification quality - 5
• Availability of components - 4
• Ease of installation and maintenance - 4
• Overall rating: 4.5

Aquaphor DWM-101S Morion

Cost - from 11,000 rubles. Six-stage cleaning system. The filter is completed with a 5-liter plastic tank and the crane. There is a pre-filter, a water treatment unit, a membrane filter, a fine filter, a mineralizer. Productivity - 190 liters a day. The recommended water temperature is from +2 to +40 degrees. Pressure from 2 to 6 bar. Of the minuses - lower productivity, a plastic water tank.

• Performance - 4
• Water purification quality - 5
• Availability of components - 5
• Ease of installation and maintenance - 5
• Overall rating: 4.75

New water Expert Osmos MO530

The average cost is 11,000 rubles. Four-stage cleaning system, equipped with a tap and a storage tank with a volume of 15 liters. Productivity - 280 liters a day. It is completed with a polypropylene, iron-free, softening filter and a membrane. There is a mineralizer. Working pressure 2-29 atmospheres. The recommended water temperature is from +5 to +35 degrees. A compact unit that does its job well. Of the minuses - a plastic tank.

• Performance - 5
• Water purification quality - 5
• Availability of components - 5
• Ease of installation and maintenance - 5
• Overall rating: 5

Aquafilter RX-RO6-75

The average price is 10,000 rubles. Six-stage cleaning system, complete with faucet and storage tank for water, with a volume of 12 liters. It is completed with filters: coarse and fine cleaning, coal, membrane, post-cleaner. There is a mineralizer. Withstands pressure up to 6 bar. Productivity - up to 300 liters per day. The recommended water temperature is +2-+40 degrees. Of the shortcomings - a plastic tank.

• Performance - 5
• Water purification quality - 5
• Availability of components - 5
• Ease of installation and maintenance - 5
• Overall rating: 5

Atoll A-550 Max

The average price is 20,000 rubles. It is completed with the crane and a tank for storage of pure water, with a volume of 12 liters. The capacity of the system is 280 liters per day. A 5-stage filtration system ensures proper water quality even with increased hardness. There is a pre-filtration cartridge, 2 coal cartridges, a membrane and a post-filter for fine cleaning, a mineralizer. Operating temperature from +5 to +40 degrees. Pressure - from 2 to 6 atmospheres. The storage tank is made of metal. No particular deficiencies were identified.

• Performance - 5
• Water purification quality - 5
• Availability of components - 5
• Ease of installation and maintenance - 5
• Overall rating: 5

Filtration systems are a necessary purchase, because your health depends on the quality of water! A high-quality filter will allow you to get really clean and healthy water, the main thing is not to forget to change cartridges in time.

Write in the comments if you use water filters, how do you like the result?

The quality of tap water leaves much to be desired, so it is undesirable to eat it, it must be subjected to additional purification. The water coming from the tap often has an extraneous taste and smell - this can greatly spoil the dish, and it can be completely disgusting to drink it. Largely for this reason, many people install special filters under the sink that remove additional impurities from the water that spoil its quality.

They remove harmful substances from water, including heavy metals, chlorine, large impurities such as squeak. These designs are installed directly into the kitchen sink, due to which clean water will be obtained instantly, unlike pitcher-type filters.

Before deciding on the purchase of a filter element, it is necessary to find out the chemical composition of the water flowing from the tap. Due to this, it will be possible to choose products that will purify water very effectively. For example, if tap water is too hard, then a filter equipped with a membrane is best suited - the so-called reverse osmosis, which is quite expensive. It is necessary to purify hard water if people with kidney diseases live in the apartment. For less hard water, an ion exchange filter will suffice.

When purchasing a filter for washing, in addition to the cost, you should pay attention to a number of other components - the cleaning technology and whether it has a softener:

• Membrane filtration is able to completely purify tap water from bacteria and viruses. Only pure water, devoid of any impurities, will seep through such a filter. However, there is a certain minus here - along with bacteria, useful minerals are also removed, so such water will not bring any harm or benefit. To cope with this problem can install a filter with a built-in mineralizer;
• To purify hard water from heavy metals, only ion exchange is used in budget filter systems. It will purify water quite acceptable, although not as fine as reverse osmosis.

The water softener is one of the most useful features that reduces the proportion of calcium and magnesium salts, respectively, this will reduce the formation of scale in the kettle. Another important addition will be carbon filtration, which helps to absorb chlorine, phenol, benzene, toluene, various kinds of petroleum products and pesticides that may be contained in water. Such a function is quite simple and is found even in the cheapest designs.

We tried to compile the most detailed rating of flow-type water filters, and we were based not only on the recommendations of specialists, but also on popularity according to user reviews. A very important role in the formation of our top 10 rating was played by the ratio of price and quality of products. We hope that the review will be quite useful.

The best water filter models of 2019

10+. Aquaphor OSMO 50 version 5

This model effectively softens the water and removes its turbidity. During manufacture, an original semi-permeable membrane is installed in the filter, which is supplemented with special carbon modules. This allows you to remove all dangerous impurities from the water, the size of which is at least 0.0005 microns - these include chlorine compounds, rust, pesticides, nitrates, heavy metals. Purified water acquires a pleasant taste, becomes useful for the body, it can even be used for preparing baby food. The design provides for a storage tank with a capacity of about 10 liters and a carbon post-filter.

It can be used exclusively for the purification of cold water - its inlet temperature should not exceed +30 degrees. The device takes up little space, so it can easily fit under the sink. A separate tap departs from it, about 1.3 liters of water can pass through the filter per minute. The filter has four levels of purification: coarse, medium, fine and cleaning from chemical compounds.

Advantages:

• Very easy to install - you just need to connect it to the water supply system;
• High quality outlet water;
• Significant work resource;
• Compact overall dimensions.

Flaws:

• Water passes through it quite noisily;
• Not too high filtering speed;
• The crane is not very convenient, you have to reach for it.

10. Geyser Prestige PM

This model is a fairly original design with a high pressure pump. Osmosis has three stages of water purification. At the first stage, the water flow passes through a special cartridge made of expanded polypropylene with a cell size of 5 microns. It will trap any insoluble particles in the water. At the second stage, water enters the carbon block, produced from coconut activated carbon, which neutralizes chlorine compounds and organic substances harmful to the human body. It improves the taste and smell of water. In the third stage, the water passes through a CBC cartridge, also made from pressed carbon carbon, which removes chlorine and other chemicals from the water.

A storage tank with a capacity of 12 liters is provided, which allows you to always have a small supply of clean water. The design has a mineralizer that restores the most suitable chemical composition of moisture for the human body.

Advantages:

• Excellent water quality;
• The presence of a small reservoir;
• filter reliability.

Flaws:

• The filter cover is not very reliable - there is a possibility of flooding;
• Due to the small size of the filters, they become clogged within a matter of weeks;
• The body of the membrane is also not very durable.

9. Atoll A-550 STD

This model is of excellent workmanship - it has a durable and dense plastic case, equipped with several stiffening ribs, which make the design quite reliable. Immediately after connecting this filter, water can be consumed, it will not have foreign odors and tastes. Looks attractive enough. Ball valve, rotates smoothly and softly.

The first stage of cleaning is located immediately at the water inlet. The cartridge here is quite dense, hard. In the second stage, the water passes through the carbon segment, which can be replaced if necessary. Water enters here through a special distributor, which ensures its uniform seepage. One such cartridge is quite enough to completely rid about 19 tons of water from chlorine. At the third stage there is a cartridge that prevents chemical residues from entering the faucet, it is quite rigid, so there is no possibility of its deformation during use.

Advantages:

• Allows you to get a large amount of clean water per unit of time;
• Standard shape with reinforced body;
• Ceramic ball valve, durable.

Flaws:

• High price;
• Not available in all stores;
• Overall design, will not fit under every sink.

8. Barrier EXPERT Standard

This is one of the best household filters produced using osmosis technology. Perfect for cleaning tap water from any mechanical impurities and chemicals. It uses multi-stage filtration technology, which has proven itself in many similar designs. This system has three main modules: mechanical purification of water from various contaminants, with its help it is possible to get rid of sand, rust and other large and small particles. The second module saturates the water with useful ions, removes chlorine, lead and copper compounds from it. The third uses PostCarbon, which removes organic matter from the composition.

Such a filter can be installed both under the sink and directly on it. Everything you need to get started is included, no additional purchases required. It can be used around the clock. The connection is quite simple - anyone can handle it. In order for the filter to start working fully, the first ten liters of water must be drained, only after that it can be used for its intended purpose. All cartridges are replaceable, as they get dirty they will have to be changed.

Advantages:

• Easy to change consumables
• For a filter of this type, the cost is quite acceptable.;
• A beautiful appearance that allows you to use this design, including at the sink.

Flaws:

• The condition of the filter elements should be monitored very carefully, otherwise there will be a very high proportion of contaminants in the water passing through them;
• Sometimes it does not cope with its task, keeping the water hardness at the same level.

7. Geyser Nanotek

This is one of the best osmosis filters designed for installation under the sink. It takes up quite a lot of free usable space due to the presence of a capacious water tank with a volume of about 20 liters. This model qualitatively filters water due to a five-stage purification system, designed for direct connection to the water supply. With its help, you can significantly reduce the concentration of iron, reduce hardness and completely get rid of chlorine.

A smart system lets in useful minerals and retains those that can have a harmful effect on the human body. If you use this system correctly and change cartridges as needed, you will be able to drink absolutely clean water for a long time without any toxic impurities. The performance of the design is about one and a half liters per minute, which is quite enough for cooking.

Advantages:

• Very soft water without impurities;
• Pretty good assembly of the whole structure, reliable protection against any leaks;
• Connecting is pretty easy.

Flaws:

• Most likely you will have to purchase a pressure gauge to measure the water pressure in the water supply system (if it is below three atmospheres, the filter simply cannot function);
• High price;
• It's not easy to find replacement cartridges.

6. Aquaphor Crystal Eco

This design is very easy to install, the installation method is no different from connecting an ordinary kitchen faucet. However, you will have to be quite careful here, as the connecting pipes leading to and from the manifold block must be connected in the correct position. Be sure to remove the filter cover. After connecting all the modules, they will have to be washed with tap water for some time so that all filter elements begin to function normally. This design belongs to ionic cleaning systems, does not take up much space under the sink, copes well with both mechanical and chemical pollution.

If necessary, you can install an additional water softening module, but it will have to be purchased separately. The manufacturer recommends changing the filter cartridges about once a year, and the softening element even more often, about every seven to eight months. The design can be attributed to the universal, since there are quite a few types of filter elements.

Advantages:

• Three standard modules included, you can install additional elements;
• The body of all filters is plastic, equipped with stiffeners;
• Very easy to install and operate.

Flaws:

• As the cartridge wears out, the taste of the water may change;
• Gradually, the filters become clogged, due to which the yield of filtered water decreases;
• The locking mechanism in the faucet may leak, which can damage the sink.

5. Aquaphor Morion M

This is one of the best models of water filters for washing, which works on reverse osmosis technology. If desired, the device can be installed not only under the sink itself, but also on it or in the immediate vicinity. This filter looks very stylish. The design of the cartridges is made according to the block-modular type. Their body additionally has stiffeners. The storage tank is built-in, it has a small volume, so the dimensions of the filter are quite acceptable.

Other designs will only function with a sufficiently high water pressure in the central system, this filter is also pressure bound, but here only one and a half atmospheres is enough. In addition, this moment can significantly save water. The useful volume of the built-in tank is 5 liters of purified water. The output reaches one and a half to two liters per minute.

Advantages:

• Produces water with medium hardness;
• There are no foreign odors and unnecessary impurities;
• The kettle does not scale.

Flaws:

• High price of replacement elements;
• Quite noisy during operation;
• In general, the level of strength leaves much to be desired.

4. EXPERT Hard Barrier

This model rightfully ranks fourth in our roundup of the best water filters this year. We put it in third place largely due to the finest mechanical cleaning among other models - filters remove particles as small as 5 microns from water. In the process of manufacturing the structure, a special Smart Lock technology was used, which allows the filter to remain in place even under strong water pressure. In addition, the byPass method is used, which can significantly extend the life of the filter element - it will have to be changed less often, and besides, it will be a good prevention for softening the passing water too much. This filter is designed exclusively for central water supply.

The filter comes with everything you need for proper installation. The maximum output can reach 2 liters per minute. Moreover, due to the tap at the inlet to the filter, this figure can be reduced. The resource of one cartridge is 10 thousand liters, after which it will need to be changed. The maximum inlet pressure should be no more than 7 atmospheres.

Advantages:

• Long service life of cartridges;
• Cartridges are very easy to change;
• Very well softens and purifies water;
• Water becomes tasty and harmless to health.

Flaws:

• The resource of the cartridge is lower compared to the one declared by the manufacturer;
• The ball valve at the inlet to the filter is not reliable.

3. New Water Expert Osmos MO530

This model is one of the newest on the market today. It belongs to the premium class, which is why it is quite expensive. Its useful qualities are at a very high level - with the help of this filter, you can get rid of 99.9% of harmful impurities. The design easily eliminates particles as small as 5 microns, removes organic compounds, pesticides, herbicides and other harmful compounds.

Here, four types of cartridges are used for cleaning at once - a standard one designed for mechanical cleaning, which rids water of suspensions of various substances. Next is the charcoal filter, which is made from activated coconut charcoal. At the next stage, a reverse osmosis membrane made in Japan is located, it is much more effective than similar parts in the models presented above. After it, there is another carbon filter, which contains activated carbon in granules, as well as minerals that enrich the water with useful microelements and minerals. Filter elements are durable - they can last about 2-3 years without the need for replacement.

Advantages:

• For a reverse osmosis system, it takes up really little space;
• High build quality;
• Durability;
• Long cartridge life.

Flaws:

• Price.

2. Geyser ECO

This is the most productive filter among all the models presented in our review, besides, it does not take up too much space under the sink and does not need complex installation and frequent replacement of the cartridge. With all its positive qualities, it is not too expensive. With its help, you can completely rid the water of chlorine, various oil derivatives and a number of other toxic and simply harmful impurities.

Despite the high performance in terms of water filtration, it is not too expensive. It has the latest modification of the Aragon 3 ECO cartridge. With its help, mechanical and sorption purification of water is provided, it is also enriched with ions. Filter replacement is rarely required.

Advantages:

• Compact overall dimensions - can even fit under a small sink;
• Perfectly purifies water;
• The cartridge is enough for 4-5 tons of water;
• Easy to install.

Flaws:

• Not detected.

1. IKAR

The IKAR filter is today recognized as the best filter for water purification. It produces top quality water. This filter not only purifies water in the best way, but also improves its performance. The output is mineralized "living" water with a negative ORP. The IKAR filter consists of two main components: a reverse osmosis filter (premium - 5 stages of filtration), an IKAR module (ionizer and water mineralizer). It is possible to additionally connect the IKAR ph-reactor to the installation, which increases the pH. The operation of the installation is automated and has a microprocessor-based control and monitoring unit for water parameters and the quality of its purification.

The IKAR filter is installed under the sink in the kitchen. Despite the high cost of the installation compared to other filters, the cost of water, which is comparable to water from Lake Baikal in terms of its characteristics, is 2 r. per litre. The filters have been mass-produced for sale since 1997. The unit has received several prestigious international awards. The largest official dealer of IKAR water treatment plants - home-spring.rf(delivery in Russia is free, installation service, discount system).

Advantages:

• The highest degree of water purification;
• Large installation resource - 1000,000 liters;
• Replacement cartridges are sold in any store;
• Electronic control of all parameters of purification, salinity and ionization of water.

Flaws:

• Not detected.

In conclusion, a useful video

As can be seen from the review, most stationary water filters are very similar in their design and functions, however, some are better cleaned from mechanical impurities, while others eliminate chloride compounds. To purchase the most suitable products, it is advisable to pre-analyze tap water. As to whether you liked our review and whether it turned out to be useful for you, you can comment on this article.

In our age of innovative technologies, everything is improving, except for the environment. Not too good is the case with water. Despite the fact that it is purified several times before entering our homes, drinking it from the tap is quite dangerous for health. That is why it is imperative to have a water filter in your kitchen.

We have selected the top 10 best cleaning devices, which, according to buyers, are the most reliable, and according to ratings in the sales market - the highest quality. The best filters in 2018 - 2019 have an excellent price-quality ratio and good performance.

10 Aquaphor Ultra

Filter jug, in which up to three liters of cold water can be purified at a time. It is compact and beautiful, perfect for the interior of even the smallest kitchen. Made of durable plastic, the filter can be moved around the house, taken on trips.

Aquaphor Ultra has a built-in universal cartridge with a resource of 300 liters. It qualitatively purifies water from active chlorine, bacteria and other harmful substances. In order not to miss the time to replace the cleaning module, you can set the desired date on the counter located on the jug body.

Pros:

• Clears water quickly.
• There is no need to change filters frequently.
• In the manufacture of durable and harmless material was used.
• The presence of a counter.
• Stylish design.
• Convenient design and ergonomic shape of the handle.
• Acceptable cost of the device and cartridges for it.
• Easy care.

Minuses:

• For a large family, 3 liters is a small volume.

9 Barrier Grand

A jug with a convenient design, the lid of which is opened by pressing the hand, then firmly fixed without releasing excess water. The transparent body is made of durable plastic.

The filter is designed for cold water. Its cleaning module contains coal, which does not allow bacteria and harmful microelements to pass through. Cartridge resource - 350 liters of water. You do not have to set a reminder on your gadgets that you need to replace the filter, because the Grand Barrier has a built-in calendar that marks the dates of the last replacement and the date when a new module will need to be installed again.

This jug will clean a liter of water in 10 minutes.

Pros:

• Inexpensive model and consumables.
• High performance.
• There is a cartridge replacement calendar.
• Volume 3.5 l.
• Compact device.
• Available in multiple colors.
• The presence of a tank for the accumulation of water with a volume of 1.8 liters.

Minuses:

• Designed to clean only cold water.

8 Brita Marella XL

The bright compact filter purifies up to 3.5 liters of water at a time. The German manufacturer put a cleaning cartridge with a resource of 150 liters in this jug. Water, passing through it, gets rid of harmful substances, including hard salts, which are the cause of scale formation on the kettle.

The filter is easy to use - it has a practical design and an ergonomic handle shape. There is a customizable calendar on the body of the jug. The volume of the container for untreated water is 2 liters.

Pros:

• German build quality.
• There is a mechanical calendar.
• The lid is securely fastened, water does not flow out.
• Sufficient volume of the compartment for the accumulation of water.
• Easy replacement of the cleaning module.
• The filter comes with 3 cartridges.
• Fast cleaning.

Minuses:

• The price is higher than previous models.
• A small resource of the cleaning module.

7 Barrier Comfort

Shower filter that purifies water and removes its unpleasant odor. Perfect for people with sensitive skin and if there is a child in the house. Thanks to the practical, durable clips, it can be easily installed at the point where the faucet is attached to the shower hose.

A distinctive feature of the Comfort Barrier is its high cleaning speed. He passes a liter of water in just 6 seconds. The filter modules located inside the device have a long service life - from two to four months with daily use. The maximum period of operation of one such cartridge is a year.

Pros:

• Very high performance.
• Easy installation process.
• Small dimensions.
• Purifies water from chlorine and smells.
• Acceptable price of the device.
• Suitable for cold and hot water (up to 50 °C).
• Made from safe materials.

Minuses:

• Can limit the flow of water in the shower - a maximum of a liter in 6 seconds.
• Relatively high price for cartridges.

6 Geyser 1UZH Euro

A flow-through water filter that connects directly to the faucet and is installed next to it. Installation is very simple, does not require special skills. Such a connection is one of the safest, as it does not create additional pressure in the water supply.

The resource of the cleaning module is 700 l. In a minute, the Geyser 1UZH Euro produces up to 1.5 liters of water. It is possible to regenerate the cartridge, which saves money.

Pros:

• Excellent value for money.
• Compact dimensions.
• Qualitatively purifies water.
• Easy installation.
• You can clean the cartridge to extend its life.
• Not only purifies water, but also softens it.

Minuses:

• Slightly overpriced replacement module for cleaning.
• Suitable for cold water only.

5 Aquaphor Crystal N

The filter is very easy to install under the sink. The manufacturer has made the system such that no additional tools or skills are needed for this process. Water goes through 3 degrees of purification, falling sequentially into three interconnected filters. The system is connected directly to the water supply.

The performance of Aquaphor Crystal N is quite high - 2 l / min. The resource of cartridges is 6,000 l, it is possible to clean the module. Suitable only for cold water, cleans it of bacteria and harmful trace elements, removes odor and softens.

Pros:

• Easy installation process.
• Possibility of cartridge regeneration.
• Fast and thorough cleaning in three steps.
• Convenient connection.
• Does not take up free space.
• The kit comes with a crane and the necessary fasteners.

Minuses:

• Relatively high price of the device and consumables.
• The resource of cartridges is slightly less than that of other models of the series.

4 EXPERT Hard Barrier

The main advantage of this filter is a very thorough and high-quality cleaning. Water, getting into it, goes through three stages of treatment.

The EXPERT Hard barrier is connected to the water supply, usually installed under the sink in the kitchen. To use it, you need to install another crane, which is included in the kit. The process is very simple, you do not need to use additional tools, all parts are easily screwed.

The filter has a huge resource of cleaning modules - 10,000 liters. It also has high productivity - in a minute you can get 2 liters of thoroughly purified water.

Pros:

• Very good and fast cleaning.
• Made of high quality and harmless plastic.
• Easy installation.
• Installed under the sink without taking up much space in the kitchen.
• Large resource of cartridges.
• Low cost compared to other devices in the range.

Minuses:

• There is no calendar for the last filter change.

3 Geyser ECO

The main advantage of this filter is high performance. It delivers 3.6 liters of purified water per minute. Powerful cartridges, which are located inside the filter, remove all hard salts, iron and harmful microelements from the water.

The ECO geyser is very small, installed under the sink, connected to the water supply. You can do the installation process yourself. The filter is made of durable and safe materials. It does not leak because it is reinforced with a special lock.

The resource of the cleaning module is 12,000 liters.

Pros:

• High cleaning speed.
• Small dimensions.
• Perfectly cleans and softens water.
• Easy installation.
• Inexpensive cartridges with a long resource.
• Durable material guarantees leakage protection.

Minuses:

• Overpriced filter.
• Suitable for cold water only.

2 Geyser Nanotek

This filter must be installed under the sink, connected directly to the water supply system. The installation process is simple and comes with detailed instructions.

The main advantage is ultrafiltration. The whole filter consists of five elements, getting into each of them, the water is purified from all harmful substances and bacteria, softens, loses bad smell and unpleasant taste.

Geyser Nanotek reproduces a liter of water in 7 minutes. Suitable for cold water only. The maximum service life of one cartridge is one year.

Pros:

• Takes up little space.
• Purification of water in five stages.
• Convenient and easy connection.
• Made from safe materials.
• Improves the taste of water.
• There is an extra cartridge included.

Minuses:

• A bit pricey.
• Low performance.

1 Atoll A-550 STD

The filter works on the principle of reverse suction. Installed under the sink, directly connected to the water supply pipes. The installation process is best left to professionals.

Water, before getting into use, goes through 5 stages of purification. During this time, it gets rid of harmful metals, bacteria and elements, softens. The water purification rate is not too high - only 0.159 liters per minute. There is a storage capacity of 8 liters.

All necessary fasteners and parts of the cleaning system are included. The resource of cartridges allows you to change them less than once every one and a half to two years.

Pros:

• Complete water treatment, the output is soft, healthy and tasty.
• Doesn't take up a lot of free space.
• Connects to the water supply.
• Long cartridge life.
• Convenient design.
• There is a compartment for the accumulation of water.

Minuses:

• High price.
• Slow water purification.

(function(w, d, n, s, t) ( w[n] = w[n] || ; w[n].push(function() ( Ya.Context.AdvManager.render(( blockId: "R-A -345261-6", renderTo: "yandex_rtb_R-A-345261-6", async: true )); )); t = d.getElementsByTagName("script"); s = d.createElement("script"); s .type = "text/javascript"; s.src = "//an.yandex.ru/system/context.js"; s.async = true; t.parentNode.insertBefore(s, t); ))(this , this.document, "yandexContextAsyncCallbacks");

In the conditions of pollution of the modern environment in each house, it is recommended to install a special water filter under the sink. Depending on the type of purification, it will help rid the water of sand, lime, soda deposits, and also filter it from metals.

To help you choose a device for your home, we have prepared a rating of the most popular models that will provide your family with high-quality and tasty water. Each sink water filter has features that are suitable for a particular type of tap water.

Are you using a water filter?

YesNo, the water is clear

The question of which water filter is better for washing often arises in families where children live. From an early age, a small organism needs to receive clean and healthy water, and the quality of tap water leaves much to be desired. In order not to get confused in the store in front of a large assortment, we suggest considering several basic selection criteria:

1. incoming pressure. When choosing a filter, you should pay attention to the type of water connection. When connected to a centralized water supply, the pressure must be at least 2.5 atm - this will ensure the normal functioning of the device. If the connection is made to an autonomous water supply and the pressure does not exceed 2.5 atm, you should take a closer look at the models with reverse osmosis - they are equipped with a pump.
2. Performance. It is calculated based on the number of people in the house and the amount of water consumed during peak loads. When choosing a filtration system for an apartment, you should independently calculate the amount of water consumed during busy hours.
3. Dimensions. The top filter faucet will be installed on the sink, so it is important to consider its size and shape before purchasing. Most often, filters for round and oval sinks are offered for sale.
4. Cartridge types. When buying a filter, several different cartridges already come with it, however, with gradual cleaning, they must be replaced. Today, the range is represented by such cartridges: antibacterial, from metal impurities, from mechanical impurities, universal and for hard water.

Having dealt with the main selection criteria, you can safely proceed to the study of our rating of household filters for washing.

The best water filters

Our top six models are opened by a model from the Aquaphor brand. The rating of manufacturers indicates that this company has long established itself in the market of water purification devices on the positive side. Trio Fe is a high-speed drinking water filter designed for under-sink installation. The model comes with 3 cartridges: they purify water from metals, chlorine impurities, pesticides.

Externally, the model has standard dimensions - 33.2x10.5x29.6 cm, so it is easily mounted under the sink. The filtration rate is 2.5 liters per minute, which is just right for a family of 3-4 people. The resource of this filter is 7 thousand liters, while changing the cartridges is necessary once a year. The temperature of the water with which Trio Fe works is from +5 to +38 degrees.

• Good price-quality ratio;
• Easy installation;
• Easy replacement of modules;
• Changing the taste of water for the better.

• Inconvenient faucet for water supply.

Alla, 38 years old

I live in an industrial region and our water is heavily polluted with heavy metals. Previously, they were saved by a jug filter, but then they bought Trio Fe, it has three degrees of purification. The water immediately became pleasant to the taste, after brewing tea, no traces remain on the mug - I like everything.

On the fifth line of our top filters for cleaning water for washing is the company Novaya Voda. This is a manufacturer from Russia, characterized by the manufacture of reverse osmosis plants. A special water tank is supplied with the model, it is mounted under the sink. You can use a reverse osmosis filter only for cold water, its working pressure is from 0.2 to 0.8 MPa.

Reference! During reverse osmosis filtration, water passes through the membrane, and the substances in it dissolve and become less concentrated.

The filtration rate reaches up to 270 liters per day. The device has the function of water mineralization, the system has 4 stages of purification: mechanical, activated carbon, highly selective membrane and a mixture of partially soluble minerals.

• Compactness;
• Stylish design;
• Easy to install;
• Transparency.

• High price.

Elena, 52 years old

My husband independently installed a reverse osmosis filter from Novaya Voda in just half an hour. The device is thought out to the smallest detail, and most importantly, it is compact and fits perfectly under the sink. The tank draws water in 30-40 minutes, after filtering the water becomes so tasty that you want to drink it all the time.

Another option for cleaning with reverse osmosis is Atoll. The model called A-550m is a combination of high performance with 5 stages of water purification. The liquid passes through several filtration phases before reaching the consumer: free chlorine removal, iron removal, reverse osmosis, softening and mineralization.

This product occupies the fourth place in the rating of water filters for washing due to the storage tank of 12 liters, a convenient separate faucet, and good performance. The inlet pressure is 2.8 - 6 atm, while the filter can work with water at temperatures from +4 to + 38 degrees, which means that hot water can be filtered.

• Components from foreign manufacturers;
• Carrying out filter tests before sale;
• High-strength propylene flasks made in Japan;
• Smooth unscrewing of flasks;
• Resistant to pressure surges in the water supply.

• A large number of connections in the system;
• High cost of replacement modules.

Denis, 33 years old

I lead a healthy lifestyle and go to the gym. Drinking for me is one of the mandatory items on the way to proper nutrition and a beautiful body. In order not to buy bottled water, I put this filter. I didn’t understand before why people install a reverse osmosis system if you can buy a regular filter cheaper. Now I feel the difference - water, as from a source.

(function(w, d, n, s, t) ( w[n] = w[n] || ; w[n].push(function() ( Ya.Context.AdvManager.render(( blockId: "R-A -345261-7", renderTo: "yandex_rtb_R-A-345261-7", async: true )); )); t = d.getElementsByTagName("script"); s = d.createElement("script"); s .type = "text/javascript"; s.src = "//an.yandex.ru/system/context.js"; s.async = true; t.parentNode.insertBefore(s, t); ))(this , this.document, "yandexContextAsyncCallbacks");

Ecosoft's five-stage reverse osmosis treatment system is in third place in our rating. What is special about it and why exactly this model took the third line? Firstly, the cost of this system is 2 times lower than the price of the reverse osmosis filters considered earlier. Secondly, there are all the necessary functions for water filtration.

Advice! The essence of reverse osmosis purification is the passage of water through the membrane. At the same time, it passes only liquid molecules and dissolved oxygen.

The popular rating put the ECOSOFT MO 5-50 model in third position due to its high productivity - 190 liters per day, good storage tank volume - 7 liters, and compactness of the installation. The weight of the system is 6 kg, and there will be no problems with installation - everything can be done according to the instructions. The model is equipped with 5 cartridges: removal of sand and mechanical impurities, removal of chlorine, fine water purification, membrane element and post-carbon.

• Compactness;
• Quality assembly;
• Faucet based on ceramics;
• Fittings made in England

• High cost of consumables.

Anton, 27 years old

I assembled and installed the filter myself, it was not difficult. I like the fact that the hoses of the system are flexible, all gaskets are of high quality, I have not found a single leak in 2 years. As for the water, it's amazing. Delicious, full of benefits, you can drink for days.

This model would be on the first line in the ranking of flow filters for water under the sink. This filter is not afraid of leaks due to an increase in water pressure in the system, because each flask is equipped with high-quality silicone gaskets. You can connect the filter in a matter of minutes, and it will take very little time to change cartridges. The body of the product is equipped with a special button that resets the level of pressure in the system in case of emergency.

The body of the model is transparent - this allows you to know exactly when it is necessary to change the filter cartridges. The device includes a separate faucet, bracket, flasks, and a set of cartridges. It consists of such cleaners: mechanical cleaning, disinfection and conditioning, as well as a carbon cartridge to eliminate small particles.

Tap water almost never meets the requirements for purity - impurities appear in it one way or another, as a result of which taste characteristics, smell and even transparency change. It is clear that drinking water straight from the tap is not worth it. You can solve the problem by installing a main filter for water purification in the apartment. This device is mounted directly into the pipeline and allows you to clean the entire volume of passing water.

Main filters for cold or hot water are used for such needs:

1. Water purification. This is very important, because not everyone can live above a deep well, and drinking water comes to houses, most likely from the nearest reservoir, river or lake. At the same time, urban treatment plants often do not remove carcinogens and heavy metals from the water, but only chlorinate, while a number of chlorine-resistant bacteria can remain in the liquid.
2. Improving the taste of water. Chlorine, rusty metal, hydrogen sulfide - water with completely unexpected tastes can flow from a tap. Naturally, it also changes the quality of the food. And purified water allows you to cook really delicious dishes.
3. Water softening to reduce exposure to skin and hair. After all, polluted water spoils hair and skin, leads to the appearance of wrinkles, rashes, and destruction of the hair structure. And purified water will not allow all these manifestations to form.
4. Maintaining the performance of appliances and plumbing fixtures. If you do not remove solid particles and dirt, then scale appears on boilers, dishwashers and washing machines, electric kettles.

Different types of devices and how they work

Main filters for water purification in an apartment and in a country house are classified into:

The main filter for water purification most often works in combination with additional devices. Thus, a softener is installed complete with a coarse filter, which allows you to normalize the chemical composition of the liquid and prevent the formation of scale in equipment. Chemical-free filters with permanent magnets can act as softeners, the action of which causes the salts dissolved in water to precipitate without causing harm to plumbing and other appliances.

AND only after the coarse cleaning system, fine cleaning devices are installed- in this case, they will be less susceptible to contamination and cartridges will have to be changed less often.

Information about that is in a separate article on the site. In it you will find a video example.

Read about the room in another article. Troubleshooting is described.

Also can be purchased grain loading equipment. It is a main filter for complex cleaning, which eliminates both chemical and biological contaminants. Outwardly, this is a large cylinder, the performance of which is in the range of 16-400 liters per minute. Such main water filters for an apartment or a private house are at the same time water softeners and deep cleaning filters. Of the minuses, it is worth noting their large size.

Rules for choosing a suitable filter model

So, the main water filter - how to choose for cleaning? Keep in mind that in ordinary apartments, as a rule, passes two lines - with cold and hot water. If we are talking about individual heating systems, then they need devices for purifying cold water.

Important: The main hot water filter is made of materials that are resistant to prolonged exposure to high temperatures. It can also be used on highways with cold water, but not vice versa.

To choose main filters for cold or hot water, you must consider:

The mesh filters used are multi-layered and fixed in a metal pipe. With its help, water is purified from all large particles (sand or scale), the size of which exceeds 50 microns. It is better to choose a main water filter with flushing - it is able to catch more contaminants. When choosing a mesh filter, you must check pipe diameter, on which the mount will be made, and in accordance with this value, purchase the device.

As for cartridge devices, the main mechanical water filter is a design of a flask, a cap and a replaceable cartridge. They are able to catch any small particles - accordingly, the thinner the degree of filtration, the more transparent and tastier the water at the outlet.

Cartridge for main filters for water treatment should be regularly change and purchase depending on the needs:

1. BA - to normalize the amount of iron.
2. BS - for water softening.
3. With activated carbon - for cleaning from chlorine.
4. With polyphosphate loading - eliminates lime deposits, protects appliances from scale.

The main filter is mounted directly into the water main. It is also advisable to install shut-off ball valves and a bypass at the site for supplying and discharging water from the filtering device. The installation site of the cartridge filter must be freely accessible, since the cartridges will have to be replaced regularly.. We eliminate the most common malfunctions.

Brief overview of filter manufacturers

Among the popular companies producing high-quality main filters, it is worth noting Honeywell and Aquaphor, New Water and Geyser.

Thus, the Aquaphor company produces a wide range of cartridge main filters - for drinking water, for household appliances (for washing machines or dishwashers), for showers. You can choose devices designed for operation with cold and hot water, eliminating chemical compounds or only insoluble impurities such as sand or rust.

The German brand Honeywell offers devices of unique quality, designed for ten times the operating pressure in the network. Here you can choose elements for coarse or fine cleaning, and the filter element is a metal mesh enclosed in an ultra-reliable flask.

New Water products are characterized by availability and high quality. The range offers main filters with a separate tap, and the degree of purification can be adjusted by installing certain cartridges.

And Geyser filters are high-tech scientific developments, thanks to which filter elements based on an ion-exchange polymer were created.