Ventilation unit compact. Ventilation units KOMPAKT REGO. Advantages of Arktos equipment

Air handling units Compact designed to work in small spaces: apartments, shops, offices, workshops, etc. In a compact sound and heat insulated housing (insulation thickness 25 mm) there are: a filter, a fan, a heater. All fans are equipped with an asynchronous external rotor motor and sealed bearings, which increases their service life. Available in three sizes air handling units with various versions in terms of fan performance and heater power. All units are equipped with EU3 class filters. To indicate the degree of filter contamination, a pressure sensor is included with each unit. Units with electric heater can be mounted in any position. Units with a water heater must be mounted in a position that ensures normal ventilation of the heat exchanger. They are easily connected to rectangular ducts. Small size Air handling units Compact allow to install them, depending on the size, in false ceilings with a depth of at least 350-400 mm. During installation, it is necessary to provide access for servicing the equipment and replacing the filter. For work management air handling units SCM and MSS control modules have been developed. They consist of an RCU-30 control panel and an automation board. The fan speed control of the Compact-1 and Compact-2 units is carried out by a three-stage transformer, Compact-3 by a frequency converter. To control the temperature of the supply air at the outlet of the unit, depending on the power of the electric heater, a triac temperature controller Pulser or TTS is provided, and for the water heater OPTIGO. The engines of the Compact-1 and Compact-2 units are protected by built-in thermal contacts with automatic restart. Motors of Compact-3 installations do not have thermal contacts; their current protection is provided in the automation board. The electrical heaters of the units are equipped with a two-stage overheating protection. The first stage is set to 55°C and restarts automatically, the second stage is set to 120°C and restarts manually. To protect the water heater from defrosting, a capillary thermostat is provided to protect the heat exchanger by the minimum temperature of the air flow. Additionally, it is necessary to install a temperature sensor to protect the heat exchanger at the return water temperature. Additional equipment includes: quick couplings, speed controllers, temperature controllers, check valve, silencer, air distribution and protective grilles, etc.

Technical characteristics of air handling units Compact

* The power of the water heater is given for air temperature -26°С, water 95/70°С

Overall dimensions of air handling units Compact

Air handling units in a frame-panel case COMPACT from a Russian manufacturer of ventilation equipment ARCTOS Designed for use in residential and public buildings. Ventilation units with capacity up to 1050 m3/h COMPACT-1 1115M complete with electric heater, filter, damper and fan. The unit is standardly equipped with filters of cleaning class G3, a pressure sensor is provided to control the degree of contamination of the filter.

Advantages of air handling units COMPACT:

• Six standard sizes of ventilation units with a maximum capacity of up to 7000 m3/h.
• Ventilation units have a monoblock, suspended design.
• Are completed with an electroheater or the 2nd, 3rd, or 4th row water heat exchanger.
• The package includes a filter with a degree of purification G3. Complete set with filters of higher purification is made on a separate request.
• The housing is made of aluminum profile and connecting elements. Steel sandwich panels filled with non-hot heat and sound insulating material 25 mm thick.
• Standard SCM…N control module (RCU-30 control panel and automation panel), which controls the operation of the air handling unit.
• it is possible to adjust the fan speed with the help of an additional device - a 3-stage transformer.
• supply air temperature control at the outlet of the unit is carried out using a triac temperature controller Pulser or TTC (electric heater), for the Aqua water heater.
• built-in motor protection with automatic restart.
• Air handling units with an electric air heater are equipped with a 2-stage overheating protection.
• Units with a water heater are equipped with a capillary thermostat to protect the heater from freezing at low air temperatures. Additionally, a temperature sensor (on the return water pipe) must be provided to protect the heat exchanger.
• The dimensions of the air handling units allow them to be installed in suspended ceilings up to 400 mm deep.
• Large selection of accessories for connection, installation and control of the air handling unit.
• The units are delivered assembled and ready for connection.

The advantage of air handling units with an electric heater (heater) is, first of all, simple installation, as well as the absence of problems associated with the possibility of defrosting the water heater. The electric heater provides fast warming up of supply air to the required temperature. Air handling units COMPACT have specially designed control devices SCM, which controls the operation of all elements (damper, heater, fan), and performs protective functions - it protects the fan motor from short circuit and overheating. In addition, the SCM control device monitors the degree of contamination of the filter.

Frame-panel air handling units from ARCTOS- this is ease of installation, a large range and high performance. The body of the unit, consisting of "sandwich" panels, performs a heat-insulating and sound-proofing function, preventing the spread of noise from the installation site of the equipment to the manned room.

Ventilation units COMPACT REGO will help create a comfortable environment in the room. ventilation units COMPACT REGO equipped with a rotary heat exchanger. Principle of operation: the rotor, covered with aluminum foil, absorbs the heat of the exhaust air and heats the air entering the ventilated room. A ventilation unit with a rotary heat exchanger can use 85% of the heat removed from the room to heat the air in the room.

Two types of rotary heat exchangers are installed in the ventilation units:

Recycler with aluminum foil;

Utilizer with hygroscopic aluminum foil.

Advantages of the KOMPAKT REGO -EC air handling unit:

Installation body COMPACT REGO consists of 2 galvanized sheets, between which sound and heat insulating material is placed. Hermetically sealed units COMPACT REGO painted with powder paint.

Manufacturing of ventilation units KOMPAKT REGO 700EC horizontal and vertical configuration allows installation in attics, basements. The design of air handling units is thought out for transportation through a doorway.

Generalization

KOMPAKT exhaust devices are controlled by a touch panel. This will allow KOMPAKT REGO to work on a “plug and play” basis, no additional effort on the part of the user is required.

Our company carries out professional installation of ventilation systems of any level of complexity.
The main advantages of cooperation with us:
installation of turnkey ventilation;
installation of ventilation systems of any type at facilities for various purposes;
use of modern innovative energy-saving technologies;
direct cooperation with the largest manufacturers of climate equipment;
providing a full package of documents;
low prices.
We perform:
installation of exhaust ventilation;
supply ventilation installation;
installation of supply and exhaust ventilation;
including installation of installations with natural and mechanical impulses;
complex development of engineering systems, including ventilation, air conditioning and heating.

Schedule

All installation work is carried out on weekdays. If there is an urgent need, in agreement with the customer, work can be carried out on weekends.

The ClimatSeason company is the official dealer of the largest manufacturers of climate equipment, including most of the well-known Japanese, Korean, Russian and European brands.
The official guarantee is presented:
for the supplied equipment (set by each manufacturer individually and ranges from 1 to 3 years);
for installation (1 year).
Warranty conditions:
correct installation and operating conditions of equipment;
integrity of the case and seals;
observance of terms and frequency of service maintenance;
preservation of purchase documents (filled out warranty card, cashier's check when paying in cash or invoice for non-cash transfer of funds)
The procedure for eliminating deficiencies during the warranty period of the equipment:
notification of the seller about the identified shortcomings no later than 5 days from the moment they were discovered (the letter is sent by e-mail or regular mail to the address: 125040, Moscow, Verkhnyaya st., 34, p. 11 or by e-mail);
departure of a specialist to the object within 5 days from the date of receipt of the message.
Please check the warranty card when purchasing and keep it for the entire warranty period. Before buying, we recommend that you carefully read the terms of warranty service and the rules for operating the equipment.