IS Ecolife is ready to perform work on automation and dispatching of engineering systems for your facility. At the same time, we both design and implement intelligent solutions for objects of various purposes: residential and office buildings, cafes and restaurants, shops and supermarkets, public and administrative buildings.
In addition, IS Ecolife performs one-time and periodic maintenance of automation and dispatching systems, as well as their maintenance and, if necessary, diagnostics and troubleshooting.
You can call us, order a call or leave a request.
Our manager will contact you and answer all your questions.
OUR SERVICES
 |
 |
 |
 |
| Automation ventilation |
Boiler automation and boiler room |
Automatic fire alarm |
Security signaling |
Departure of an engineer to calculate the cost of work is free of charge
Automation and dispatching of engineering systems
Once build and literally forget about the existence of engineering systems allows automation and dispatching. Without automation, any of the subsystems would carry more problems than comfort, since it would require constant and careful attention to its work.
Has the correct temperature been reached? Will the water freeze in the heater? Is the tank full? Will the air heater burn out? Is there a water flow? Is the pressure normal? Is there tension? What sensor worked? And this is not a complete list of questions that the automation and dispatching system provides answers to.
The complexity and cost of such systems depends on the level of their intelligence and the number of functions performed. However, any automation system must perform basic functions, which, for example, ventilation and air conditioning systems, are the following:
Control and management of the operation of units that are part of the equipment of ventilation and air conditioning systems,
- control valves and dampers,
- Safety assurance: blocking the heater in the absence of air movement, frost protection of the water heater,
- Protection of equipment from overheating, short circuit, incorrect connection,
- Indication of the state of the operating equipment,
- Performance regulation,
- Centralized temperature control in all rooms,
- Implementation of a temporary control algorithm (daily/seasonal/annual) without the intervention of maintenance personnel.
In addition, automation is mandatory for heating systems, is very popular in electric lighting systems, and can also be introduced into the power supply system, security, etc.
Automation and dispatching are numbers 1 and 2 in the list of design principles and arrangements of modern engineering systems. On the one hand, technology strives to ensure that networks work with minimal human involvement - as they say, build, run and forget. On the other hand, the customer sets the task of ensuring the most reliable control of the processes occurring in the network throughout its entire length.
In the event of a change in the system parameters and various emergency situations, a signal about this should immediately go to the control center, where automation or a human operator will make an operational decision. So, when the pressure drops in the water supply, the automation should immediately turn off the emergency section. If there is a threat of melting the heating element, turn off the incoming voltage or reduce the current.
In addition, commands should be sent as quickly as possible from the control center to change the parameters of individual sections of networks or the entire network in case of changes in external conditions. For example, when the air temperature in a heated house decreases, the boiler output automatically increases. If the input voltage drops in the external electrical network, stabilizers, uninterruptible power supplies, and, if necessary, an autonomous generator or other backup line come into operation.
Automated management of building engineering systems is carried out on the basis of industrial controllers. The main advantage of controllers is their functionality and uniformity, that is, the same controller can control any engineering system.
Depending on the connection of the required sensors to any engineering system, the engineer selects a controller that is suitable for the number of digital and analog inputs and outputs.
After completing all the work on the selection of controllers, sensors, other necessary elements, laying communication lines, the programmer proceeds to visualize and program processes directly on the computer. Programming and visualization of processes are carried out in the so-called SCADA system, which is represented by various computer programs depending on the manufacturer of the equipment and data interface.
Examples of automation of domestic and industrial systems
Ecolife Engineering Systems Company has significant experience in designing, installing, commissioning and maintaining engineering systems of any complexity, length and localization. We work with a wide variety of environments:
Water (automation of water supply, heat supply and heating systems);
- air and gas-air mixtures (automation of ventilation and air conditioning systems);
- various industrial fluids and liquid fuels;
- intangible objects - electricity, light, radio waves.
Our engineers and installers perform professional installation and adjustment of auxiliary automated systems - fire extinguishing, security and fire alarms, remote access control, internal and facade lighting.
In all cases, the emphasis is on the maximum autonomy of the systems. For automatic lighting control timers are used that are configured taking into account the calendar duration of day and night, photocells that record the natural illumination of a room or area, motion sensors that are configured to move objects of a given mass and dimensions.
The control of the perimeter or internal volume is carried out by electromagnetic sensors that record the crossing of a conditional border or movement within it.
A fire signal is given by devices that analyze the state of the atmosphere and the ambient temperature. The smoke analyzer, having caught particles or molecules of combustion products in the surrounding space, simultaneously sends a signal to the central control room and activates local means of fighting fire. The automation also reacts in the event of a sharp increase in the temperature of the air or surrounding objects.
As we have already indicated above, automation is needed not only for emergency response in the event of a fire, flood or intruders entering the facility, but also for resolving quite normal situations associated with a change in the degree of load on the network. For example, in industrial production, working in one or two shifts automation of power supply systems will allow, without human intervention, to increase the power supply of the facility every morning, and to reduce it every evening. Our specialists will quickly and professionally install the necessary equipment that will help optimize energy consumption and reduce current payments to resource supplying organizations.
Building and network management systems
The larger the object on which automated engineering systems are mounted, the more important is the role of their dispatching - that is, remote control and management of engineering systems and notification of all processes occurring in the system. In a large building or structure, where pipes, air ducts, power cables and SCS are tens and hundreds of kilometers long, and the availability of many nodes and sections is very difficult for technical and structural reasons, the availability of a workable end-to-end monitoring system comes to the fore.
Dispatching concerns two main parameters - the state of the environments moving through the engineering systems and the state of the engineering systems themselves.
Temperature, pressure, density, viscosity, direction and speed sensors, and chemical analyzers are used to measure the parameters of the network content. System state sensors react to the appearance of cracks, ruptures, corrosion, mechanical damage to valves and connecting elements, blockages, deposits of salts or oxides on pipe walls and other negative changes that can affect the efficient operation of the engineering structure and jeopardize the safety of the facility. In the case of power supply systems, measuring equipment records the current voltage and current, an abnormal increase in resistance in certain sections of the network, which leads to increased power consumption and overheating of cables, which in turn can cause a short circuit or fire. If we are talking about production with several sections that consume a large amount of industrial current, then competent dispatching of the system will allow rational distribution of loads, thus saving electricity and preventing excessive load on one line in comparison with others.
Automation of ventilation and air conditioning systems
Ventilation in modern buildings is represented by a supply and exhaust ventilation system with heat recovery in winter. This system provides for the installation of a number of sensors: a temperature sensor for the incoming outdoor air, a temperature sensor for the air leaving the atmosphere, a temperature sensor for the air heater discharge pipe, a temperature sensor for the outgoing air stream from the building, a room temperature sensor, a pressure and air velocity sensor in the air duct. It is also necessary to control the mode of operation of the supply (supply) and exhaust fans, the state of the heat exchanger, clogging of air duct filters and other parameters. For control and operational regulation of all these parameters of the system, automated control systems based on industrial controllers are used.
In commercial buildings (shopping, entertainment centers, restaurants, airports, etc.) there is a need for centralized control of split systems or a combination of systems with a chiller-fan coil. Management can be carried out on the basis of an industrial controller with a supervisory control system.
dispatching and automation of ventilation and air conditioning systems in a large office center will also save the cost of operating systems by taking into account such factors as temperature and humidity in the room and outside the window, the number of people working in the premises, and the insolation of the building. A modern automatic climate control program can save up to 50% of electricity compared to a typical situation when all air conditioners in a building turn on at full capacity in summer. In addition to financial benefits, optimization in terms of climate will help to avoid personnel losses - after all, it is well known that the uncontrolled operation of air conditioners and climate systems is the main cause of colds in the summer.
The engineers of our company will perform the necessary calculations of the ventilation and air conditioning system, install automation equipment and, together with the company's programmers, will set up the system in the shortest possible time.
Automation of alarm systems
Competent alarm system dispatching- a guarantee of the safety of any object. ECOLIFE professionals are ready to perform complex installation of security systems of any level of complexity. We work with perimeter alarms, protection of the internal space of open areas and enclosed spaces, protection of specific objects intended for the storage of inventory items or playing another important role (safes, vaults, pantries, archives, weapons rooms, control and communication points, etc.). d.).
Reliable scheduling is the most important when installing perimeter security systems, which can be tens of kilometers long. More than ten types of alarms have been invented in the world, but they all operate on the same principle: as a result of an attempt to penetrate the perimeter (or even when approaching a conditional line), a certain electrical circuit opens (or vice versa closes), as a result of which an alarm signal is sent to the control room . In modern security systems, penetration can also cause other forms of reaction - the inclusion of emergency lighting, video recording and photo fixation systems, warning sirens, blocking exits, etc. Turning to the specialists of the ECOLIFE Group for help, you can make your facility practically invulnerable to all forms of ill-wishers and intruders.
Automation of heating and heat supply systems. Boiler room dispatching
Our interests extend not only to large industrial facilities that provide large volumes of design, installation, commissioning and service work. With the same responsibility, we are ready to perform automation and dispatching of engineering systems at low-rise construction sites.
Many owners of cottages and dachas seek to equip their homes with the latest technology, without initially thinking about the cost of operating systems. Meanwhile, our experience shows that the correct placement and configuration of networks will make their operation not only convenient, but also cost-effective.
In a small country house, this applies primarily dispatching of a boiler house and a heat substation, which will allow you to effectively spend natural gas or other fuels and maintain an optimal energy balance at home using an autonomous heating system.
IS Ecolife specializes in the automation of all types of heating of residential buildings and other premises.
Temperature sensors are used to automate the process of space heating. At the request of the client, a choice of temperature control method is made, taking into account the optimality criterion. To set the necessary parameters of the system operation, control panels are used, which, together with sensors and servo drives, are connected to the controller.
Optimization of heat in residential buildings has been a trend in developed countries for a decade and a half. Gradually, it begins to gain popularity in Russia, although our climatic conditions are objectively more difficult than in Europe, where the philosophy of internal energy efficiency was originally born. It is curious that in English such a house is called a passive house.
In Russia, with its sharply continental climate, it is hardly possible to do without heating and build a completely “passive house”. But by setting up a competent accounting of heat consumption, using effective insulating materials and controlled heating systems, it is possible to minimize fuel consumption, and hence material costs and harm to the environment.
Boiler room dispatching with the help of IS ECOLIFE specialists - the most important part of the device for autonomous heat supply at home. Often, boilers are installed directly in basements and plinths, however, from the point of view of fire safety and environmental protection, it is better to do this in a separate building. Heat losses during the supply of hot water from the boiler house to the house with high-quality insulation are insignificant.
Having established remote control over the operation of the boiler house, the owner of the house can directly control fuel consumption, steam pressure in the heat exchanger, water temperature in the circuits, the percentage of combustion of the mixture and other parameters directly from the office. Information comes both from a variety of sensors and visually, using video cameras. Broadcasting of telemetry information can go by wire and wireless communication channels (bluetooth, Wi-Fi, radio). Dispatching can also be organized at remote sites, controlling, for example, the operation of the boiler house of a country house from a city apartment, office, or simply from a mobile phone, being on the other side of the globe. Modern mobile and information technologies provide unlimited opportunities for organizing both control room at the facility, and a virtual control room on the World Wide Web.
Five advantages of working with IS ECOLIFE
By ordering automation and dispatching services for engineering systems from ECOLIFE, you can safely count on the following competitive advantages:
- The highest professionalism and many years of experience of our specialists, always focused on results and accustomed to unconventional ways to solve the most complex technical problems.
- Equipment with innovative equipment, modern tools, materials of the latest generation.
- Focus on digital technologies and achievements of the global IT industry.
- Rationality and the ability to adapt to any situation. If we see that the good old relay can successfully replace the expensive electronic control module of the heat exchange system at the current stage, we will never insist on excessive spending and will offer our client all options for completing the system. The well-being of our customers is ultimately our well-being.
- A universal approach to the design, implementation and implementation of projects. Our specialists are ready to carry out equally high-quality automation project for a small cottage, and dispatching of heat points apartment building, and complex automation of engineering networks of a shopping center or industrial building. The amount of work never frightens us, on the contrary, they serve as an incentive for our specialists to reveal all the facets of their knowledge and talents.
- INTELVISION offers services for the design, installation, programming and commissioning of automation and dispatching systems for engineering systems and buildings (BMS) in Moscow, St. Petersburg, Kazakhstan and the CIS.
We are also software developers.
INTELVISION has created the first in St. Petersburg, which was recognized as the best in Russia according to the results of the Hi-Tech Building Awards.
Our portfolio includes objects for such customers as: Gazprom, YIT, Global, CMI-Development, Russian Railways, Hyatt, Marriott, Yota.
Smart Building Benefits:
- reduction in electricity costs - up to 60% for various subsystems;
- possibility ;
- downsizing of service personnel;
- increased comfort and safety;
- reducing the risk of accidents, reducing the insurance premium;
- increasing the attractiveness of the object for tenants;
- transparent operating processes;
- detailed information about the functioning of the building in a visual form.
INTELVISION specializes in creating complex building management systems and integrating building subsystems into a single top-level management system. The following subsystems can be combined into a single building management system (RMS - room management system, BMS / BMS, building management system):
- power supply;
- HVAC (heating, ventilation and air conditioning);
- technology-based lighting, DMX;
- water supply and sanitation;
- motorized blinds;
- automated fire extinguishing.
Energy efficiency of buildings
INTELVISION specialists have been trained under the certification program of the largest international green building assessment system LEED and are ready to provide comprehensive consulting support in the development of projects. We have not only the necessary knowledge, but also real experience in creating energy efficient buildings. During the construction of the Alpiysky mixed-use complex, we applied a number of modern energy-saving technologies, thanks to which the complex can qualify for a LEED silver certificate. We will help you develop optimal solutions in terms of resource saving and energy efficiency in the field of- integrated building management systems;
- engineering systems;
building management system
Automation of buildings and automation of engineering systems of buildings begins already at the design stage of any modern complex. When developing projects for building automation systems, the tasks of managing heating systems, electricity supply, water supply and sewerage, lighting, ICT, etc. are solved. The higher the functional load, the more difficult it is to automate building engineering systems: for example, in large shopping, industrial and office complexes to traditional tasks building automation, such specific ones as air conditioning, security and fire fighting, telecommunications, etc. are added. Building automation assumes that all elements of engineering systems, having their own local control points, are combined into a common BMS intelligent building dispatching system.
INTELVISION offers design of building automation systems, supply of equipment, installation, commissioning and technical support of building automation systems and automation of engineering equipment, SMIS and SMIK systems based on equipment from Schneider Electric, Siemens, Wago, Phoenix Contact, at the request of the customer.
We are certified specialists in KNX, Lonworks, DALI, Bacnet, Modbus, PLC technologies, which we actively use in building automation projects.
Building Automation Examples
The INTELVISION company implements projects of Smart Buildings and Residential Complexes based on the equipment of the world's leading brands. Let's highlight the following projects:Any modern buildings (public, residential, administrative, industrial, etc.) are equipped with a large number of engineering structures that ensure the safety and comfort of people. The growth in the volume of construction of buildings with an increase in their number of storeys, saturation with complex equipment requires the widespread introduction of Automated Control Systems (ACS) in housing and communal services.
In modern buildings, the work of the following engineering systems is automated:
- ventilation.
- Power supply.
- Electric lighting.
- Water supply.
- Central heating.
- Fire fighting system.
- Air conditioning systems.
- Video surveillance and access control systems.
Automation of engineering equipment of buildings is necessary for constant monitoring of its work. Automatic systems themselves observe, fix, record, the set of states of the building equipment. In accordance with the given programs, automation systems can respond to changes in sensor readings, and change the modes or parameters of the functioning of building engineering systems. They notify the personnel about critical and close to emergency states of engineering equipment. Allow dispatchers to make quick decisions in non-standard and emergency situations.
Building automation systems consist of numerous sensors, controllers, control subsystems, united under one common control system. This control system allows you to set the operation programs for both the entire engineering system of the building as a whole and its parts, as well as monitor the controlled subsystems of the building from dispatch terminals, and through them carry out general control or programming of the operation of automation systems.
Automation of engineering systems of buildings can significantly reduce the operating costs of their maintenance due to constant automatic control, increase the service life and performance of engineering equipment and economical use of resources.
Power supply automation
Automation of power supply of engineering equipment of buildings should provide anti-emergency operation. Control the parameters of electrical equipment and the power grid. Thanks to the automation of the power supply of buildings, the reliability of electrical installations is significantly increased, the number of maintenance personnel is reduced, and operating costs are reduced.Power supply automation promptly detects malfunctions in the operation of electrical equipment that can pose a threat to life for people, cause enormous damage to the economy or cause mass rejection of the company's products. This is especially true for buildings and structures with a massive crowd of people, such as: metro, stadiums, urban transport, large department stores, maternity hospitals, high-rise buildings, large enterprises.
Also, a significant benefit of introducing a power supply automation system is expressed in a sharp decrease in the downtime of equipment consuming electricity and the associated economic costs.
Automation of ventilation systems
Ventilation systems are divided into supply and exhaust. Supply systems provide fresh air to the premises. Exhaust, on the contrary, remove polluted air and create an air balance. Automation of ventilation systems maintains an acceptable eco-balance of industrial, administrative and residential premises. The work of many industrial productions would be impossible without the operation of automated ventilation control systems to maintain the required standards of life safety.Air conditioning automation
Automation of air conditioning systems allows maintaining the stability of temperature, humidity and air freshness with a given accuracy, protects premises from the undesirable influence of outdoor polluted air, and ensures the constancy and trouble-free operation of air conditioning equipment. Automation of engineering equipment of buildings in the field of air conditioning allows you to efficiently use heat and cold, and therefore save electricity.Lighting control automation
Lighting control automation sets the optimal operating mode for room lighting systems. This saves energy and reduces the operating costs of buildings.Automation of engineering equipment of buildings in the field of electric lighting provides, in particular, remote control of lighting using modern gadgets.
Our company specializes in the design, production and installation of building automation systems. In addition, we integrate reliable automated control systems into the existing systems of engineering equipment of buildings, which increases the efficiency of the operation of these engineering systems.
System Structure
The system has a two-level structure:Upper level:
DispSky cloud SCADA system is a platform for remote control of industrial equipment via a web browser.The DispSky system will make it possible to organize a control room for a complex for monitoring the operation of refrigeration units, only by equipping the dispatcher with a computer, tablet, smartphone with Internet access. All information about the object is sent to the server in the Data Processing Center (DPC). The data is stored and processed directly on the server.
Lower level:
Automation of engineering systems is provided by the following devices:- temperature sensors;
- Pressure Sensors;
- motion sensors;
- ACS controllers;
- fire and security sensors;
- PLC controllers;
- executive mechanisms.
- PLC controllers for refrigeration equipment;
- communication module (iRz ATM21 or HF-2211);
- discrete input/output modules;
- actuator control contactors;
- cabinet uninterruptible power supply system;
- terminals for connecting external cables.
- keep records of consumed electricity;
- control the quality of electricity;
- promptly receive messages about increased power consumption.
Automated workplace of the dispatcher:
Functions and services:- Visualization of the control process in the form of mnemonic diagrams.
- The function of sending emergency sms-messages.
- Ability to view archived and online videos.
- Service for viewing operator actions.
- Service of free layout of mnemonic diagrams.
- Service for editing mnemonic diagrams and project structure.
- Report generation service.
- Chart viewing service.
- Alarm archive viewing service.
- Distribution function for systematic reports.
- Ability to display the status of systems on the map.
- It is possible to draw up individual mnemonic diagrams at the request of the customer. Transfer to the customer of the designer allowing to make mnemonic diagrams.
Benefits of our system
- Remote control of objects.
- Management of multiple objects from one point.
- Fast integration into the process.
- Visualization of the technological process.
- Data backup.
- Accurate distribution of access rights for personnel.
- Data protection.
Any structure without communication systems looks lifeless and is of little value. Only connecting electricity, water and gas, heating and sewer systems to it allows you to use the building for its intended purpose. The totality of all communication systems that provide life b in buildings or structures, commonly called life support systems or engineering systems. In industrial premises, where communications are required not only to maintain the microclimate, but also to ensure production about the process, the volume of consumed resources increases many times over. Along with this, there is an increasing need for accounting and control of the use of water, gas, electricity and the need to coordinate the work of all engineering systems. These tasks are solved by partial or full automation of engineering systems. TORELS LLC offers services for the design, implementation and debugging of automated th systems of dispatching and management of engineering systems.
LLC TORELS - ready-made solutions for automation of production and engineering systems
The specialists of our company offer a full range of work on the development of automation and dispatching of engineering systems. In each specific case, individual solutions are offered for a specific production: monitoring the operation of the system, preventing emergencies, accounting for consumption, the mode of operation and shutdown of devices, maintaining the optimal microclimate and the level of illumination of the premises. We offer rational cost-effective solutions for the automation of engineering systems:
plumbing and sanitation;
ventilation and air cooling;
power supply;
lighting;
heating;
gas supply;
warning systems (fire and burglar alarms);
special systems (intercom, dispatching, etc.).
Automation of engineering systems is a cost-effective project
Implementation of systems of complex or local automation and control of engineering networks helps to avoid waste of resources, maintains a comfortable indoor climate, systematizes consumption accounting.The implementation of programs for automation of management and control has a huge economic potential and a quick payback due to energy savings. Automation and dispatching of engineering systems ensures the safe operation of industrial premises, shopping and entertainment facilities, sports facilities, medical and preventive institutions. The level of automation of engineering systems can be different: the organization of an automatic dispatch network, the installation of sensors, meters and switchboards or complex intelligent systems with software and the ability to control from individual mobile units. Practice shows that automation systems for managing engineering systems significantly reduce the operating costs of maintaining an object.
