Working curriculum for vocational training and advanced training in the profession “Repairman. Locksmith-repairman training program

CURRICULUM AND THEMATIC TRAINING PLAN FOR A REPAIR WORKER

TRAINING PROGRAM FOR METER - REPAIR MANAGER

Subject: "TECHNICAL OPERATION"

Topic number 1. Boiler plant. Thermal power plants.

Boiler installation. Thermal power plants. Composition, purpose, classification.

Topic number 2. Boiler units. The device and circuit of the circulation of boilers of various types.

Boiler device. Types of problems. Boiler circuit diagram.

Topic number 3. Actions of a locksmith in case of an accident in the boiler room.

Actions of a locksmith in case of explosion of a boiler, gas mixture. Actions of a locksmith in case of gas leakage, building collapse.

Topic No. 4. Pipelines of the boiler house.

Pipelines of the boiler room. Purpose of pipelines, requirements for operation. Water hammer in pipelines and measures to prevent them.

Topic number 5. Auxiliary equipment of the boiler room.

Auxiliary equipment of boiler installations. The device and principle of operation of pumps, smoke exhausters, fans. Types of malfunctions in the operation of the pump, smoke exhauster, fan and measures to prevent them. Characteristics of pumps and smoke exhausters and fans (efficiency, power, flow, pressure, rpm).

Topic number 6. Boiler room fittings.

Stop valves in the boiler room (gate valves, valves, check valves). Distinctive features of the valve and valve. Maintenance, repair and safety measures.

Topic number 7. Water treatment.

Conditions for the formation of scale, its effect on the operation of the boiler. Methods of pre-boiler water treatment. The device of Na-cation exchange filters. Types, device and purpose of water heaters, reasons for the repair of water heaters. Features of the repair.

Topic No. 8. KIP and A.

Purpose, principle of operation of manometers. Pressure units.

Topic number 9. Requirements for metalwork tools and fixtures.

Types of locksmith tools. Hand tool. Mechanized tool. electrified tool. The purpose of the tool and fixtures and the requirements for it. Tool maintenance. Permission to work with the tool.

Subjects: "WORK HEALTH, ELECTRICAL SAFETY"

Topic number 10. Fundamentals of labor legislation.

Topic number 14. Industrial sanitation and personal hygiene.

Preparing the work area before starting and cleaning it up when the job is done. Free distribution of detergents and disinfectants. Storage of clean and used cleaning material. Laundry, dry-cleaning, drying and repair of overalls, footwear. Personal hygiene.

Topic No. 15. Organization of work on permits, orders.

Organization of work on orders, permits, orders. The concepts of "work permit", "Order". Organizational and technical measures to ensure the safety of work. The validity period of the work permit, order. Order on the organization of work on work permits, orders. Work performed according to work permits, orders. Persons responsible for the safe production of work. The procedure for issuing and issuing work permits, orders. Crew permission to work. Conduct targeted training. Supervision during work. Changes in the composition of the brigade. Making work breaks. Starting work the next day. End of work. Delivery and acceptance of the workplace. Closing the work permit. The work of contractors.

Topic number 16. Electrical safety.

The concept of electric current (direct and alternating) and voltage. Units. Effects of current on the human body. Dangerous values ​​of current and voltage for humans. Pathways for the passage of current through the human body. Rules for the release of a person from the action of electric current up to and above 1000 V. The concept of the "step voltage" zone. Equipment grounding. Lighting of industrial and household premises, workplaces. Signal night lighting. Portable lighting. Permissible voltage of portable lamps for operation in various conditions (dry, damp, basements, thermal chambers). The concept of electrical safety groups.

Topic No. 17. Means of individual and collective protection.

The procedure and norms for issuing, terms of wearing, testing of PPE. Means of individual and collective protection. .

Topic No. 18. Labor protection requirements in emergency situations.

Personnel actions in cases of power outage, equipment malfunction, fire, collapse of a building, its part or individual structures, etc.

Topic No. 19. First aid in case of accidents at work.

First aid for acute poisoning. Electrical injury. Injuries. Bleeding. Fractures. Burns. Frostbite. .

Topic number 20. Final lesson.

This lesson discusses exam questions, as well as questions that employees have in preparing for exams. Topics are given taking into account the specific equipment on which locksmiths work.

EXAMINATION TICKETS TO TEST THE KNOWLEDGE OF REPAIR WORKERS

TICKET No. 1 (mechanic - repairman)

2. The procedure for admitting a repairman to independent work?
3. Hydraulic test of the boiler, when is it carried out and at what pressure?
4. Pathways for the passage of electric current through the human body?

TICKET No. 2 (mechanic - repairman)

1. The device and principle of operation of the boiler?
2. Types of malfunctions in the operation of pumps and measures to prevent them?

4. Dangerous and harmful production factors in the boiler room?
5. Rules for the release of a person from the action of electric current?

TICKET No. 3 (mechanic - repairman)

1. The device and principle of operation of the water heater?
2. Types of plumbing tools, purpose and requirements for it?
3. Order. What kind of work is being done according to the order. Expiry date of the order?

5. Providing first aid in case of injury (fracture, dislocation)?

TICKET No. 4 (mechanic - repairman)

1. The device and principle of operation of a centrifugal pump?
2. Safety requirements when working in the boiler furnace?
3. The concept of electric current (direct and alternating), voltage, resistance. Units?
4. Primary fire extinguishing equipment in the boiler room?
5. Providing first aid for thermal burns?

TICKET No. 5 (mechanic - repairman)

1. The device and principle of operation of the boiler?
2. Work permit for performing hot work in the boiler room?
3. Safety requirements for the repair of rotating machinery?
4. Types of briefings on labor protection?
5. Providing first aid for chemical burns?

TICKET No. 6 (mechanic - repairman)

1. The device and principle of operation of the boiler?
2. Shutoff valves in the boiler room. What is the difference between a gate valve and a valve?
3. Starting sequence of the network pump?
4. Safety requirements when working in tanks (tanks)?

TICKET No. 7 (mechanic - repairman)

1. The device and principle of operation of the boiler?
2. Permissible voltage of portable lamps for operation in various conditions (dry, damp, boiler furnaces, tanks)?
3. Types of locksmith tools?
4. Primary fire extinguishing equipment in the boiler room?
5. Providing first aid for hypothermia, frostbite?

TICKET No. 8 (mechanic - repairman)

1. The device and principle of operation of the boiler?
2. Technological sequence of pump assembly?
3. Responsibility of employees for violation of the requirements of labor protection instructions, job and production instructions?
4. Safety requirements when working with an electrified tool?
5. Providing first aid in case of electric shock?

TICKET No. 9 (mechanic - repairman)

1. The device and principle of operation of the boiler?
2. Installations for water softening. The main problems that arise during their work. Methods for their elimination?
3. What should a locksmith do in case of an emergency in a boiler room?
4. List the types of briefings that are carried out with a repairman?
5. Providing first aid in case of poisoning?

TICKET No. 10 (mechanic - repairman)

1. The device and principle of operation of the boiler?
2. Heat-insulating and lining materials?
3. Safety requirements when working at height, from scaffolding, scaffolding and other devices?
4. The procedure for the maintenance and service of metalwork tools?
5. Providing first aid for carbon monoxide poisoning?

1. Safety rules for the operation of thermal power plants, approved. by order of the Ministry of Energy of the Russian Federation of March 24, 2003 No. 115.

2. Safety regulations for the operation of heat-consuming installations and heating networks of consumers.

3. Safety regulations for the operation of thermal mechanical equipment of power plants and heating networks (SO 34.03.201-97).

4. Regulations on the organization of work on the training and certification of specialists from organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision (RD 03-19-2007).

5. "Rules for labor protection during the operation of electrical installations", approved. Order of the Ministry of Labor and Social Protection of the Russian Federation dated July 24, 2013 No. No. 328n.

6. "Rules for labor protection during the operation of thermal power plants", approved. by order of the Ministry of Labor of August 17, 2015. No. 551n.

7. "Rules for labor protection when working with tools and devices", approved. by order of the Ministry of Labor of August 17, 2015. No. 552n.

9. The procedure for training in labor protection and testing knowledge of the labor protection requirements of employees of organizations, approved by the Decree of the Ministry of Labor of Russia and the Ministry of Education of the Russian Federation dated 13.01.2003 N 1/29.

10. GOST 12.0.003-74* SSBT. Dangerous and harmful production factors. Classification.

11. GOST 12.0.004-90 SSBT. Organization of labor safety training. General provisions.

12. Regulations on the peculiarities of the investigation of accidents at work in certain industries and organizations, approved by the Decree of the Ministry of Labor of Russia of October 24, 2002 N 73.

13. Rules of the fire regime in the Russian Federation
(approved by Decree of the Government of the Russian Federation of April 25, 2012 N 390).

14. Intersectoral rules for providing workers with special clothing, special footwear and other personal protective equipment, approved by order of the Ministry of Health and Social Development of the Russian Federation of June 1, 2009 N 290n.

15. Lists of harmful and (or) hazardous production factors and work, during the performance of which preliminary and periodic medical examinations (examinations) are carried out, and the procedure for conducting these examinations (examinations), approved by the Ministry of Health of the Russian Federation of April 12, 2011 N 302n.

16. Intersectoral instructions for first aid in case of accidents at work. - M .: Publishing house of NTs ENAS, 2007.

The training of a mobile compressor driver is carried out in accordance with the "List of workers' professions, positions of employees for which vocational training is carried out", approved by order of the Ministry of Education and Science No. 513 dated July 2, 2013 "On approval of the List of professions for workers, positions of employees for which vocational training is carried out" , the requirements of the Unified Tariff and Qualification Handbook of Works and Professions of Workers, the All-Russian Classifier of Workers' Professions, Positions of Employees and Wage Categories.

Any compressor is a set of devices designed to produce compressed air or other gas. The advantage of a mobile compressor over a stationary one is, first of all, that their use is possible at sites where the installation, and even more so the assembly of a stationary compressor is not possible.

These compressors are used in various industries such as mining, transportation, oil and gas, mobile maintenance, etc.

For example, typical applications for mobile compressors are truck maintenance, tire inflation, radiator blowing, etc.

Specialists who work on mobile compressors are mobile compressor operators.

The profession of a mobile compressor driver requires the following skills and abilities: maintenance of a mobile compressor unit, start and stop of a compressor, diesel engine; laying communications, connecting them to the compressor unit and the wellhead; carrying out work to increase the outflow of fluid from the well by creating a drawdown at the bottomhole, monitoring the inflow of fluid (oil); adjusting the air supply during heat treatment of the bottomhole zone of the well; participation in the work on the opening of productive layers with the use of gaseous agents and the elimination of complications in drilling; ability to adjust the operating modes of the compressor unit and diesel engine according to the readings of instrumentation; monitor the operation of all mechanisms and systems of a mobile compressor unit, establish the main parameters of the unit in accordance with the technological regulations for drilling and testing (development) of wells, etc. The driver of a mobile (mobile) compressor must know: methods of operating oil, gas and injection wells; purpose, arrangement and operating rules of various systems of compressors, power equipment, automobile, instrumentation and automatic protection of the compressor unit; types of fuel, lubricants and cooling; methods for detecting and eliminating malfunctions in the operation of a mobile compressor unit; schemes for connecting communications from the compressor unit to the well; consumption rates of operating materials for the production of compressed air; basic information on heat engineering, electrical engineering, drilling and operational equipment, drilling technology, testing (development) and overhaul of oil and gas wells; plumbing in the scope of work performed.

To perform work, the compressor unit operator must undergo professional training, no more than once a year and no less than once every 5 years, take short-term refresher courses of at least 72 hours in order to acquire new knowledge and skills and improve their rank, have a medical a book with no contraindications to work. It is important that persons under the age of 18 are not allowed to work as a mobile compressor operator.

Tuition fees and terms of development

ANO DPO "Comprehensive Training Center for Retraining Personnel" conducts vocational training in the following programs:

Form of study: full-time, part-time, remote with the use of "Internet" technologies.

What is included in the training program

In the process of mastering the training program developed taking into account the Order of the Ministry of Labor of Russia No. 513 dated July 2, 2013 "On approval of the List of professions for workers, positions of employees for which vocational training is carried out" for mastering the working profession of a mobile compressor operator, the following issues are studied:

• Fundamentals of Economics and Law
• Materials Science
• Reading blueprints
• electrical engineering
• Information from technical mechanics
• Labor protection and industrial safety
• Purpose, device and principle of operation of mobile compressors
• Internal combustion engines, purpose, device and operation
• Chassis device
• Drives, fittings and auxiliary equipment of mobile compressor units
• Repair of compressors, drives, fittings and auxiliary equipment
• Operation of mobile compressors
• Rules for the design and safe operation of pressure vessels
• First aid to those injured during work

Classes are held in the classroom of ANO DPO "Comprehensive Training Center for Retraining Personnel", as well as through the "Internet" portal of the site of the Training Center.

Upon completion of training issued

• A certificate for each employee who has passed certification;
• Minutes of the attestation commission with a list of employees who have passed attestation.

How to get training as a mobile compressor operator

After completing vocational training (or at a specialized school or training center), a mobile compressor operator has the right to increase the assigned rank of his specialty by taking short-term advanced training courses in the amount of at least 72 hours no more than 1 time per year and at least 1 time in 5 years, while there is a certain gradation for each of the categories, namely:

Benefits of working with ANO DPO "Integrated Training Center for Retraining Personnel"

• all training programs are developed by teachers, taking into account modern educational and methodological materials using new technologies in teaching;
• a convenient form of an electronic library for the educational material of the course has been developed for you;
• the cost of training for a mobile compressor driver is significantly lower than that of other training centers;
• training takes place at a convenient time for you and in the form that is required for your organization.

Required documents

EXPLANATORY NOTE

This program is intended for training and retraining (advanced training) of workers in the profession "Mobile compressor operator" of 5-6 categories on courses with a break from production.

The qualification characteristics are compiled in accordance with the Unified Tariff and Qualification Reference Book of Works and Professions of Workers and contain requirements for the basic knowledge, skills that workers of the specified profession and qualifications must have.

The duration of training is set at 356 hours, retraining (advanced training) - 304 hours in accordance with the requirements of the Model Regulations on the vocational training of workers in production.

By the end of the training, each worker should be able to perform work, provided for by the qualification characteristic, in accordance with the technical conditions and norms. Qualifying trial work is carried out at the expense of the time allotted for industrial training.

Mobile compressor driver 5-6 category should be able to:

1. Prepare mobile compressor equipment for well completion operations.

2. Assemble and disassemble communications and connect them to the wellhead and compressor unit.

3. Start and stop the diesel engine and compressor.

4. Monitor the operation of all mechanisms and systems of the mobile compressor unit.

5. Identify and eliminate malfunctions in the operation of the diesel engine and compressor.

6. Maintain and perform preventive maintenance of compressor unit systems, including emergency protection systems.

7. Regulate the operating mode of the compressor unit according to the indications of instrumentation.

8. Carry out work to call the flow of fluid from the well.

9. Properly organize and maintain the workplace.

10. Save materials and fuel.

11. Apply the most expedient and productive methods and modern methods of labor organization.

12. Keep a log of the operation of the compressor unit.

9. Basic information about drilling and operational equipment, technological processes of drilling, testing (development) and overhaul oil and gas wells.

10. Rules of safe movement.

11. Rules for the safe maintenance of a mobile compressor, rules, arrangements and safe operation of pressure vessels.

12. Plumbing in the amount of work performed.

Monitoring the state of labor protection and safety at drilling enterprises.

Administrative and criminal liability for violation of the rules and safety instructions and accidents resulting from these violations. The order of investigation and accounting of accidents.

General safety regulations in oil industry and in the field of geology and exploration of subsoil.

Topic 3.

First aid.

Means and methods of first aid. First aid for electric shock. First aid for wounds and bleeding. First aid for burns, frostbite, gas poisoning.

Topic 4.

Environmental protection.

Organization environmental protection. Protection of atmospheric air, soils, reservoirs, bowels of the earth, vegetation and animals. Characteristic environmental pollution. Measures to combat noise, pollution of the soil, atmosphere, water environment; organization of production on the principle of a closed cycle, transition to waste-free technology, improvement of waste disposal methods, integrated use of natural resources, strengthening of control over the maximum permissible concentrations of harmful components entering the natural environment, reverse water supply(and others), in relation to the industry and the underlying enterprise. Personal opportunities and responsibility of the workers of this procession in environmental protection.

Topic 5.

Fundamentals of drilling technology and operation of oil and gas wells.

Drilling rig and its elements. The main operations included in the drilling process. Well construction cycle. Well drilling technology.

Natural reservoirs of oil and gas. The concept of porosity and permeability of rocks. Physical properties of oil. Gases of oil fields and their main properties.

Types of oil fields. Reservoir pressure. Formation driving forces and resistance forces. Regimes of oil reservoirs.

General concepts about the technology of drilling oil and gas wells.

Casing columns. Well cementing. Column leak test. Production string perforation.

Oil field and its structure. The structure of the earth's crust. General information about rocks. Occurrence of oil and gas in the earth's crust. Oil collectors. A reservoir is like a porous reservoir filled with gas, oil and water under pressure. Acting forces in the reservoir: formation water pressure, compressed gas pressure, elastic forces of oil, water and gas.

Reservoir pressure. General information about oil wells.

Static and dynamic levels. Downhole pressure. Well interaction. Conditions of inflow to the bottom. Regimes of oil fields. Placement of wells in the area.

Permissible withdrawal of fluid from the formation. Oil field development systems. Geological, technical and economic factors influencing the choice of well development and placement system. The concept of well development. Preparation of wells for development.

Ways to prevent open flowing of wells.

Operation of oil wells. Oil well equipment.

Underground well repair. Types of well repair. Well workover technology.

Disciplines of specialization

Topic 6.

Technique and technology for drilling wells and penetrating productive formations using air, aerated fluid and foam systems.

General ideas about the technology of drilling wells using air and aerated fluid. Features of the application of the advantages and disadvantages of these methods.

Scheme of wellhead piping when drilling with air and aerated fluid. Special equipment.

Scheme of installation of ground equipment. Arrangement of compressors and auxiliary equipment.

Selection of the mode and control of the main parameters of the operation of the compressor unit when drilling with air purge and aerated liquids.

Basic technologies for drilling in productive formations using foam systems. Applied equipment.

Safety rules for drilling wells and stripping productive formations using air, aerated liquids and foam systems.

Topic 7.

Device, main systems and procedure for maintenance of power drives of mobile compressor units.

Power engine as a source of mechanical energy. Classification of internal combustion engines according to the type of fuel used and the method of ignition of the working mixture.

General arrangement of internal combustion engines.

Purpose and classification of connecting rod and crank mechanisms Care of the connecting rod and crank mechanism. Identification and elimination of basic faults.

Purpose and arrangement of parts of the gas distribution mechanism.

Purpose and classification cooling systems. The influence of the thermal regime on its power, efficiency and wear. Normal coolant temperature. Devices of the cooling system and their purpose. Radiators device. Water pumps. Fans. Drive belt adjustment fans. Thermostats, their device and work.

The principle of operation of the cooling system.

Diesel power system. General arrangement of the power system, instruments, fuel priming pump, fuel filter.

Types of nozzles, their purpose, device. Fuel pipeline, its device. Types of fuel. Diesel automatic stop valve in case of oil pressure drop in the lubrication system, its purpose, device and principle of operation.

Purpose and classification of the lubrication system. Oil requirements. Diesel lubrication system. Oil pumps, their device, drive and operation. Oil filters, their arrangement, inclusion in the system and operation. Oil coolers. Heat exchangers. Pressure regulation in the lubrication system. Control and safety devices in the lubrication system.

Diesel starting systems.

Electrical equipment of internal combustion engines. Diesel electrical equipment. Rechargeable batteries. ICE instrumentation and their purpose. Diesel and diesel compressor instrumentation. Remote pressure gauges, thermometers, electric total station, voltammeter, hour meter. Purpose and their principle of operation.

Care, operation, maintenance, possible malfunctions of the internal combustion engine and diesel engine, their causes and methods of elimination.

Topic 8.

Device, main systems, maintenance procedure

compressors and compressor units.

The concept of compressors. Thermodynamic compressor cycle. Classification of compressor machines according to the developed pressure, the characteristics of the compressed gas, the principle of operation, the installation method and the location of the working bodies, the drive, the developed productivity.

Reciprocating compressors - a schematic diagram and principle of operation. Classification of piston compressors. Operating cycle in a reciprocating compressor. Details of piston compressors, purpose and device.

Reciprocating compressor design. Auxiliary equipment for reciprocating compressors

Run-in and adjustment of compressors. Break-in periods. Compressor preparation for start-up. Starting and stopping compressors. Determination of malfunction of compressors. Compressor emergency stop. The main faults and ways to detect them. Supervision of the compressor during operation. Operation of compressors. Air cleaning. Installing an air cleaner. Compressor cooling.

Mobile compressor units. Mounting base and equipment included in the installation. Schematic diagram of the installation. Main technical characteristics: design of compressor cooling and lubrication systems.

General provisions on the equipment maintenance system. The purpose of the maintenance system. Maintenance system and repair of mobile compressor units for well development. Types of maintenance and repair provided by the maintenance system. Current and capital repairs. Information about the procedure for performing operations and the methods used in the current and major repairs of mobile compressor units. A set of tools, fixtures and instrumentation used in the maintenance of mobile compressor units for well development.

Topic 9.

Instrumentation and auxiliary mechanisms.

Electrical measuring devices of mobile compressor units: remote electric tachometer, air-thermometers for water and oil, tachometer, pressure gauge, voltammeter others, their purpose, design and principle of operation.

Instrumentation and their purpose in mobile compressor units.

The division of instrumentation into groups, depending on their purpose.

Indicating, self-recording, summing and signaling devices. Devices for measuring pressure, flow of liquids and gases, measuring temperature, liquid level.

Devices for monitoring the operation parameters of mobile compressor units.

Schematic diagram of the inclusion of control devices in the installation system. Technical characteristics of devices. The device and operation of the instrumentation system of mobile compressor units.

Automation system for mobile compressor units. The main functions of the automation system of installations and the devices used in it (electrocontact pressure gauges, time relays, pressure switches, signal lights, etc.).

Design and operation of the automation system for mobile compressor units. Setting up automation devices. Rules for the operation of the automation system of mobile compressor units. Possible malfunctions of the automation system and ways to eliminate them.

Topic 10.

Locksmith basics.

Markup. Drawing risks. Punching marking lines. Markup methods.

Cutting. Cutting sheet steel according to the level of the vise jaws, about marking risks. Cutting straight and curved grooves on a wide surface of cast-iron parts with a crosscut.

Edit. Straightening of strip steel on a plate. Straightening of a round steel bar on a plate and using prisms. Straightening of pipes and section steel (angle).

THEMATIC PLAN OF INDUSTRIAL TRAINING.

INDUSTRIAL TRAINING PROGRAM.

Topic 1.

Introductory lesson.

Teaching and educational tasks of industrial training in advanced training. The content of labor in accordance with the requirements of the qualification characteristics. Stages of professional growth. Familiarization with the work experience of production leaders.

Acquaintance with the program of industrial training for a mobile compressor driver of 5-6 categories.

Topic 2

Labor safety, fire safety, electrical safety.

Labor safety briefing.

Familiarization with the workplace of an advanced mobile compressor operator during well development, the use of gaseous agents when opening productive formations and eliminating complications in drilling.

Workplace safety training.

Acquaintance with the basic safety instructions for construction and installation, repair work and fire regulations.

Topic 3.

Training in basic and auxiliary types of work.

Monitoring the progress of the process and regulating the parameters of the regime during the development of wells after drilling and workover.

Control and regulation of the parameters of the compressed air supply mode during the opening of productive formations and the elimination of complications in drilling with the help of gaseous agents.

Control and regulation of compressed air supply parameters during thermal treatment of the bottomhole zone of a well.

Study of the procedure for monitoring and regulating the operation of the main systems of mobile compressors. Training in maintenance techniques for the main systems of mobile compressors in the process of its operation. Training in basic troubleshooting techniques for mobile compressors.

Preparation of a working tool for maintenance and repair of mobile compressor units. Checking and preparing the starting engine for operation. Removing, checking and installing the clutch on the starting engine. Maintenance of the starting motor. Disassembly, inspection, repair and assembly of the starting motor. Disassembly, inspection, repair and assembly of the starting compressor.

Preparation of heating devices for work. Maintenance of heating devices. Heater repair.

Maintenance, care and troubleshooting in the crank mechanism of a diesel engine, gas distribution mechanism, diesel lubrication system, diesel cooling system, diesel power system, gearbox.

Compressor conservation. Compressor depreservation. Compressor preparation for start-up.

Maintenance, care and repair of the compressor. Maintenance, care and troubleshooting of compressor auxiliary equipment (filters, coolers, radiators, sumps, pumps, etc.).

Maintenance, care and troubleshooting of the mounting base of mobile compressor units.

Repair and adjustment of brakes, lighting, change of instrumentation and instrumentation, etc.

Topic 4.

Independent performance of work as

mobile compressor driver 5-6 categories.

Independent performance of the entire range of works provided for by the requirements of the qualification characteristics of a mobile compressor operator of 5-6 categories under the supervision of a master (instructor) of industrial training with the obligatory observance of safety instructions and technological regime.

Mastering advanced techniques and methods of work. Consolidation of acquired work skills. Achievement of established production standards.

Qualification (trial) work.

BIBLIOGRAPHY:

Main:

1. Vadetsky oil and gas wells. Textbook - M .: Academy, 2010. - 352 p.

2. Shchurov and oil production technology. Textbook for high schools. – M.: Alliance, 2009. – 510 p.

Additional:

1., Pokrepin for the repair of oil and gas wells. Tutorial. - Volgograd: In-Folio, 2009 - 288 p.

3. Nikishenko equipment. Tutorial. - Volgograd: In-Folio, 2008. - 416 p.

4. Molchanov well repair. Textbook - M.: Nedra, 1986. - 208 p.

5., Ilsky machines and mechanisms - M., Nedra, 1980.

6. Vadetsky oil and gas wells. - M., Nedra, 1985.

7. Safety rules in the oil and gas industry. - Moscow, 1998.

8. Rules for the installation of electrical installations.

9. Rules for the design and safe operation of stationary compressor units, air ducts and gas pipelines.

The training of a locksmith for the repair of technological installations is carried out in accordance with the Order of the Ministry of Labor and Social Protection of the Russian Federation dated November 27, 2014 No. 944n “On approval of the professional standard “Locksmith of technological installations”, “List of professions of workers, positions of employees for which vocational training is carried out”, approved by order of the Ministry of Education and Science No. 513 dated July 2, 2013, the requirements of the Unified Tariff and Qualification Handbook of Works and Professions of Workers, the All-Russian Classifier of Workers' Professions, Positions of Employees and Wage Categories.

Technological installations - a production complex of structures and equipment located in a building or on a separate site of an enterprise and intended for the implementation of a technological process.

The profession of a mechanic for the repair of technological installations requires the following skills: disassembly, repair, assembly and testing of components and mechanisms of machines, apparatus, pipelines, fittings of varying complexity; repair of installations, units and machines of varying complexity; locksmith processing of parts according to qualifications; washing, cleaning and lubricating parts; marking and drilling holes on flanges; straightening, filing and cutting threads on pipes; production of simple fixtures for assembly and installation of repaired equipment, etc.

A mechanic for the repair of technological installations must know: the device, purpose and principle of operation of individual devices and components of the equipment being repaired; operating conditions of the serviced equipment; basic locksmithing techniques; general rules for welding and soldering; rules for testing pipelines of small diameters; basic concepts of tolerances and landings, qualifications, classes of accuracy and cleanliness of processing; purpose and rules for the use of devices and tools; pipe marking techniques; drawing elements; rules for the use of oils, detergents and lubricants, etc.

To perform work, a mechanic for the repair of technological installations must undergo professional training, no more than once a year and at least once every 5 years, take short-term refresher courses in the amount of at least 72 hours in order to acquire new knowledge and skills and improve their rank, have a medical book with no contraindications. It is important that persons under the age of 18 are not allowed to work as a mechanic for the repair of technological installations.

Tuition fees and terms of development

ANO DPO "Comprehensive Training Center for Retraining Personnel" conducts vocational training in the following programs:

Form of study: full-time, part-time, remote with the use of "Internet" technologies.

What is included in the training program

In the process of mastering the training program, developed taking into account the Order of the Ministry of Labor and Social Protection of the Russian Federation of November 27, 2014 No. 944n “On approval of the professional standard “Mechanic of technological installations”, Order of the Ministry of Labor of Russia No. 513 of July 2, 2013 “On approval of the List of professions of workers, positions of employees for which vocational training” for mastering working profession of a mechanic for the repair of technological installations the following questions are being studied:

• Industry economics
• Materials Science
• Fundamentals of electrical engineering and electrical equipment of the NPS
• Fundamentals of technical mechanics
• Reading drawings and process flow diagrams
• Tolerances and landings. Technical measurements
• plumbing
• Instrumentation
• Industrial, fire safety and labor protection
• environmental protection
• Composition and properties of oil
• Equipment of main oil pipelines
• Pumps, fans and their device
• Maintenance and repair of pumps and fans
• Pressure regulators, dirt filters. Maintenance and repair
• NPS tanks and their device
• Maintenance and repair of tanks and main tank equipment
• Pipelines, their maintenance and repair
• Pipeline fittings: gate valves, valves, taps, safety lever valves, electric drive gearboxes. Maintenance and repair
• Auxiliary equipment of the PS: oil system, cooling system, leakage pumping system, ventilation, sewerage, water supply. Maintenance and repair
• Repair and restoration of equipment parts
• Emergency stop analysis

Classes are held in the classroom of ANO DPO "Comprehensive Training Center for Retraining Personnel", as well as through the "Internet" portal of the site of the Training Center.

Upon completion of training issued

• A certificate for each employee who has passed certification;
• Minutes of the attestation commission with a list of employees who have passed attestation.

How to get trained as a mechanic for the repair of technological installations

After completing vocational training (either in a specialized school or training center), a mechanic for the repair of technological installations needs to take annual short-term refresher courses in the amount of at least 72 hours, no more than 1 time per year and no less than 1 time in 5 years.

Benefits of working with ANO DPO "Integrated Training Center for Retraining Personnel"

• all training programs are developed by teachers, taking into account modern educational and methodological materials using new technologies in teaching;
• a convenient form of an electronic library for the educational material of the course has been developed for you;
• the cost of training as a mechanic for the repair of technological installations is significantly lower than that of other training centers;
• training takes place at a convenient time for you and in the form that is required for your organization.

Required documents