The main task facing DIY flower pots- to make an unusual, beautiful, functional design for flower pots. Many often confuse these two concepts: a planter and a pot, because the main task of the pot is the high-quality growth of the plant, which is impossible without drainage, the correct volume and composition of the soil. And the main task of the cache-pot is to make the appearance of the pot unbanal, to decorate it so much that it turns into one of.
Make a flower pot with your own hands
Our article today will be devoted to various ways to create a spectacular decor that could be applied in an apartment, but also let's see a few. In any case, it is important to understand that make a flower pot with your own hands everyone can, and there is nothing complicated about it, no matter what technique or material you choose for yourself.
First DIY flower pots, photo which you see above, is intended solely to decorate the appearance of an ordinary pot or even a flower vase. The principle of its assembly is quite simple - several dozens of identical elements are used, which must first be assembled into a single panel, and then the container itself with the ground should be wrapped around it. As elements for assembly, you can use wooden skewers, ice cream sticks, or, as in our example, colored pencils of the same length. The sequence of the planter is as follows: it is necessary to lay out the pencils on the table in one row, aligning them so that they form a straight line along the lower border, and the total length of the entire row is the circumference of the desired planter. After that, you take a piece of rope, glue it and attach it to the pencils one third of the length, after which you glue the second piece of rope in the same way, stepping back about five centimeters from the first. When the glue dries, the pencils will be firmly attached to the ropes and will be able to curl around the pot. This design is reminiscent of the bamboo mat that is often used for serving. A satin ribbon will complete the work, which wraps around the bottom of the craft.
Unusual containers for succulents and other unpretentious indoor plants have long been one of the ways for designers to show their creativity. After all, such green pets can survive in the conditions of vertical gardening, and in other extreme creative conditions. After all, for begonias, violets or azaleas, the conditions for their normal growth, moisture level and nutrition must first be observed. Whereas the cactus will grow well in a pot, which is decorated with an old book or its imitation. As evidence - examples that you can see in the top photo. A hole is made in the surface of the cover or inside the book, which is covered with gravel or chips. Inside, under a layer of pebbles, there is a pot of earth, in which the plant itself is located. Since you will still need to water, although not so often, your green pet, it is best to cover the cut-out paper pages from the ends with varnish or diluted PVA glue so that a waterproof film forms on the paper surface.
DIY pots for indoor flowers
Unusual textures or the use of non-standard forms are typical for fashion options. pots with their own hands for indoor flowers. They have recently become especially popular, and, as it turned out, you can knit not only a blanket or pillowcase on a pillow, but also covers for decorating flower pots.
For knitting, you can use both knitting needles and a hook, the fabric in this case will differ in appearance. If you make weaving with knitting needles, you can decorate the knitting with braids, cones, weaves, as if weaving a real sweater, only for plants. Well, crochet products can be decorated with appliqués and embroidery, which will look very organic. Knitting is done using a circular element, which is widely used for napkins, and then, when the desired diagonal of the craft is reached, you stop adding loops, knitting only rows of the same size. In this case, the canvas will naturally grow in height, without increasing in diameter. Only at the end, when there will be a slight increase in the diameter of the container, you can also add the required number of loops. The main thing in such crafts is to make them strong enough so that, if necessary, you can hang or form vertical landscaping elements, as is the case with do-it-yourself macrame flower pots, schemes which you can find on the web. It is also important that knitted covers can be easily removed if you need to wash or clean them.
If knitting and complex varieties of needlework are not yet given to you, then planter covers can be made in a simpler way, for this you will need several knitted pullovers with a classic pattern or ornament. Several pieces will be needed because it is desirable that such covers are not single, but represent a series, then the composition will look more harmonious. In the photo you see an example of a similar craft, which is performed using a finished base. It can be any ready-made vase, which you can significantly decorate in such a simple way.
As for do-it-yourself hanging planters for flowers, photo with an example of the creation of which you see, then they belong to a glorious family or apartment. The beauty of such works is that, in addition to the ease of creation and availability (read, free) of source materials, they will perfectly show themselves for decorating flower beds, balconies, open spaces, because they are not afraid of snow and rain, bright sun and strong wind. As you can see, one single bottle of dark plastic is enough for you to place one flower pot, however, the bottle in the process of work changes beyond recognition. If you can’t draw a template for the faces of a bunny and a bear yourself, you can find suitable images on the Web.
DIY flower pot for the garden
The next large section is devoted to creating DIY flower pot for the garden. Increasingly, in addition to summer residents, other ways of placing flowering plants on the site are also interested, because the more such beauty around, the more you will be inspired to stay in the country.
The method of recycling old beach slippers, which is proposed above, is suitable for all lovers. In addition to the flip flops themselves, you will also need ceramic tea cups, preferably matched to the color of the shoes. Thanks to the design of the rubber bands on the flip flops, the cup will be securely fixed inside, provided that the plant, along with the soil, does not weigh too much. By the way, in this case, the cup can be turned from an integral part of the cache-pot into an independent container if, using a suitable drill, several drainage holes are made in its bottom.
can also be born on the basis of global design trends. If earlier you could simply knock down a box for seedlings with the help of boards, now a planter, which is a bar with a cut out middle, is already a fashionable designer pot for plants. Moreover, such a box is recommended to be artificially aged a little, for this it is impregnated with stain, rubbed with sandpaper or other similar materials, and then covered with protective azure, so that the decor can safely remain outside in all weather conditions.
Often in the country there is a fairly large number of old baskets, wicker coasters, which one by one have a completely unpresentable appearance. However, if you use them in combination with each other, making, for example, complex vertical gardening of the fence, then such a composition will immediately look not old, but vintage, adding a lot of advantages to the appearance of the site.
The following idea is based on exactly the same principle, only instead of boring pots and baskets, this composition uses pot-bellied ceramic teapots, some of which you can find in your household, and buy the other part at a flea market. When they make up one common row, it looks creative and certainly attracts attention.
Do-it-yourself hanging planter for flowers
In that, that is, directly that part of the site that is occupied by trees, there is also nothing complicated. You simply need hanging planter for flowers. DIY it can be made using improvised materials, as well as weaving it yourself using the macrame needlework technique.
The main task of any such suspension system is to create fixtures that would keep the entire system in balance so that the pot is in a level position and the plant can feel comfortable. There can be three or more fasteners, since it is possible to keep the system in balance with two ropes only if there are special ears exactly on the sides, and then the reliability of such crafts will be doubtful.
As you can see from the photo that adorns this section, both an old basketball and floral linen, which is used for eco-crafts, can serve as the material for the planter itself.
DIY macrame flower pots
Always look beautiful do-it-yourself macrame flower pots, this ancient needlework allows you to create reliable designs, in which, in addition, thanks to various combinations of knots and loops, you can add various decorative elements: stone and wooden beads, flowers made of plastic or clay.
For such elegant do-it-yourself flower pots schemes you can find in magazines devoted to this type of needlework, and you can either buy materials in a specialized store or order using online resources. In any case, the cost of such crafts will even allow you to spend a certain amount of materials for the period of mastering the technique; in any case, the planter will look like a fashionable designer decoration.
No more room on the windowsill? This method will be of interest to those who cannot attach their favorite flowerpots even on the floor!
I really like the idea vertical gardening. And all because this method helps to save space when there is a lack of space and frees window sills and other horizontal surfaces from green spaces, and it also looks unusual, stylish and very beautiful.
And today's edition "So simple!" invites you to learn interesting ideas on how to make beautiful hanging flower pots using simple and affordable improvised materials. Now this is not a balcony, but a real garden of Babylon!
DIY hanging planter
- And I'll probably start with macrame techniques, which, in my opinion, is most suitable for creating hanging planters.
Planters in this technique can be either very simple, which can be done literally in 10-15 minutes with your own hands, or complex - the result of many hours of work.
Therefore, I propose to practice first on the easier ones, honing your skills, and then move on to more difficult ones.
- Hanging pots from metal baskets can be immediately covered with a substrate, but in order to prevent moisture from passing through, coconut fiber must be laid on the bottom, and this will only improve the appearance of the pots.
- Great idea for crochet lovers!
- A hanging planter made of straws will suit the interior with innovative touches. Just grab a pack of neon cocktail straws, some strong string, and get started. And even 15 minutes will be enough for this!
- An old hoop, good glue, an unnecessary bowl - and in 20 minutes you are the owner of such an unusual and very stylish planter.
To do this, half of the hoop is placed vertically, a bowl is placed horizontally inside and points of contact are marked on the hoop. Glue is applied to them, a bowl is placed and kept until the glue hardens.
- For creating hanging pots you can use a variety of materials at hand available in the house: baskets, buckets, bottles and even old balls!
- And here are some simple master classes on the technique of weaving macrame.
I love these options!
- The tree also gives a fairly wide range of actions, a variety of shapes and colors. Just choose what you like best and create!
And this is not even a planter, but a real shelf for flowers! Arm yourself with an old cutting board and strong threads, and so that the flowerpots do not fall and the board does not slip out, make small grooves along the edges of the board or secure the threads with a drop of glue.I think this is an incredibly simple and yet quite elegant idea!
This hanging planter will wonderfully complement your home interior. It is done quickly and simply, the materials also will not take a lot of money.
To see the process weaving planters in macrame technique, I suggest watching this video.
This is a great hanging orchid planter idea! A decent result, while everything is quite simple and easy, isn't it?
I also suggest that you familiarize yourself with 6 wonderful ideas
Decorating with flowers both interiors and landscapes is in demand by many people. They are successfully used by designers to implement their projects. For a more harmonious fit, they use flower pots with their own hands, which they create at master classes according to their sketches. But not only they use such techniques, ordinary people successfully come up with complex designs from what is “at hand”.
Types of pots by material
Hanging decorations should be chosen based on the location, the allowable weight per support, the amount of water consumed by the plant and the temperature regime. The materials are:
There is a large assortment on the market, but some people prefer to make outdoor hanging flower pots with their own hands and admire their creation. Hangers for pots are made from chains, ropes, metal rods and from cuts of fabric, twine and yarn using the macrame technique.
Cage, chandelier or wooden boxes
The frameless hanging planter is formed directly from coconut fibre. The roots of a plant with a lump of soil are wrapped with a piece of polyethylene, then a fiber winding is made on top of it. Everything is fixed at the base of the plant and placed with suspensions in the chosen place. For the base frame, you can take a basket of wire, metal rods or vines. To make it yourself, you can use the following materials:
- Rigid wire.
- Pieces of plastic pipe.
- Unnecessary plastic arcs from the greenhouse.
- Willow or newspaper tube vine.
- Wooden planks.
- Or whatever your fantasy tells you.
Outdoor hanging planters, placed in a summer cottage or garden plot, create bright accents. They grow low compact or ampel varieties of flowers, from which you can create contrasting or harmonious compositional groups. Making hanging planters is easy with your own hands, using a variety of household items. By organizing competent care for the plants grown in flower pots, it will be possible to provide a magnificent decor for the landscape for a long time.
- hanging containers are mobile and easily moved to the right place;
- in such devices, ampelous flowering plants look great, for which there is enough space to create spectacular waterfalls of flowers and leaves due to hanging stems;
- it becomes possible to create suitable conditions for each specific plant;
- in inclement cold weather in the autumn, you can bring flowers into the room;
- hanging planters do not take up space on the site, which is important with a small yard area.
- the price of the sample you like;
- destination pots;
- the size of the pot to be decorated;
- compliance with the style of the interior or landscape design;
- product practicality.
- increased air humidity;
- sudden changes in temperature, especially freezing and thawing.
- many times cheaper than analogues from the store;
- created taking into account the tastes and preferences of the master;
- are unique.
- wood, including planks, bamboo, dry branches collected in the garden;
- cement mixtures that, after solidification, turn into durable, moisture-resistant structures;
- durable types of twine and rope, from which wicker planters are made;
- textiles treated with wear-resistant paint.
- fits perfectly into the interior;
- decorates any container in which an indoor flower grows;
- can be used for ordinary and ampelous plants;
- in combination with others, it forms a multi-tiered garland that saves space on the windowsill and gives the window a unique look.
Show all
Advantages of street planters
Growing flowers in hanging planters has several advantages over stationary flower beds:
It is not necessary to look for suitable models in stores, as hanging planters are easy to make with your own hands from available materials. Various containers are used in this capacity, which are additionally decorated with decorative elements.
Mounting types
Outdoor hanging planters are located on the structures of houses, balconies, verandas, arbors. They can be hung on tree branches, fences. A convenient device is a tripod or a mobile vertical stand of a different shape with several branches, which is installed anywhere in the garden. To fix the pots, various types of fastening are used.
Vertical stand
To place a planter in order to decorate the building, durable forged brackets are used. Their stylish design brings an additional decorative touch to the surrounding atmosphere.
Forged brackets
A convenient view is a retractable mount that has two carabiners - one under the ceiling, and the second holds the pots. This design greatly facilitates care, as it allows you to lower the pots down to 0.9 meters.
Retractable mount
A lightweight option for fixing containers with flowers is a forged hook. It is easy to install and move as needed.
Pots on a hook
Often, flower pots are hung with decorative chains, which can have different designs and dimensions.
Chain attachment
By tying a strong twine, cord or rope to the container, it is possible to firmly attach the planter to the selected support.
Use as anchor for ropes
Supports for a balcony. Convenient openwork drawers with a specially curved fastening securely hold them on the balcony.
balcony stand
Suspended structures, oriented to fix on fences, perfectly decorate this element of the landscape.
Attaching a planter to a fence
Reliable fasteners ensure the preservation of the composition created from hanging planters for a long time.
Planting flowers, rules of care
The choice of planting method for flower crops is determined by the shape and design of the pots. If the container has a shape identical to the pot, then a layer of gravel is laid, a soil mixture suitable for the selected variety is poured in and seedlings are planted or sowing is carried out. Openwork varieties must be filled with fibrous material or moss. A moisture-proof film is laid on top and soil is poured.
With a limited area of \u200b\u200bgrowth of flowers in a flower pot, it is necessary to practice the correct agrotechnical planting techniques and provide timely care. The soil substrate must have a loose structure. If the site is dominated by heavy loamy soil, it is mixed with compost and sand in approximately the same proportions.
Basically, the cache-pot performs a decorative function and is used as a pallet in which pots with plants are placed. Such flowers need to be watered every other day, as moisture evaporates from the soil slowly. Half an hour after watering, the pan is checked. If a lot of water has leaked into it from the pot, it should be poured out. But often the soil is poured directly into the pots. In such a situation, in order to exclude stagnation of moisture, drainage holes are provided in them.
Plant care includes weekly feeding with a special liquid complex containing the necessary mineral elements. It is bred according to the instructions.
On hot days for ampelous plants provide irrigation with warm water. Dry shoots, leaves, flowers are regularly removed. To ensure the emergence of new shoots in order to form a lush crown, you need to cut the tops of the stems.
Plant selection
In order for flower arrangements in hanging planters to look stylish and beautiful, it is necessary to think over the assortment of plants for growing. Cultures that form compact bushes and ampelous types of flowers are popular. The characteristics of each plant are taken into account, conditions suitable for them are created.
Large funnel-shaped flowers of achimenes for a long time brighten any landscape. When growing, it should be borne in mind that this culture belongs to light-loving varieties.
Growing, bacopa forms a lush ball of leaves strewn with small exquisite flowers. This plant is characterized by repeated flowering after a dormant period, which lasts about 20 days.
With original petal colors, balsam leaves a lasting impression when grown in any landscape. He needs a lot of light to form a lot of buds that favorably shade the dense foliage.
Begonia is a shade-tolerant culture that perfectly decorates a space with insufficient light. The variety of colors inherent in the varieties of this flower allows you to create original plant ensembles.
Verbena - the decoration of this plant are bright green leaves combined with small purple, pink or blue flowers.
To decorate a garden, a summer cottage, many people choose geraniums, choosing the color scheme of its flowers that is appropriate for the composition being created.
Dichondra - the decorativeness of this variety is given by long hanging shoots, strewn with green leaves of a rounded shape. Yellowish small flowers remain almost invisible.
Ampelous campanula - the stems of this flower culture reach a length of 30 cm. Gorgeous flowers resembling a bell have two shades, which led to the popular name - “bride and groom”. Abundant and long flowering allows you to create catchy composite spots.
The bell is equal-leaved - a flower strewn with an abundance of original buds, is able to delight with its splendor until the beginning of autumn, if faded inflorescences are immediately cut off. It is necessary to provide protection from the sun during the midday hours.
Delicate lavender fills the surrounding atmosphere with a piquant aroma. This plant needs sandy, alkaline soil and daily watering.
Unpretentious lobelia can be planted in the shade if it is not possible to allocate a sunny place for it. With regular watering and top dressing, it blooms throughout the summer season.
Nasturtium - this unpretentious flower is often cultivated in the local areas and looks great in pots. It attracts with its unpretentiousness and the ability to tolerate a slight shadow well.
If at the dacha petunia is grown in flowerpots or hanging planters, a magnificent color design of the site is created. She needs good lighting.
Surfinia - the plant has pronounced powerful shoots. Its flowers are painted in shades of varying degrees of saturation. There are purple, blue, white, yellow varieties.
Tumbelina - a spectacular variety of ampelous petunia, looks majestic and creates a festive atmosphere.
Magnificent fuchsia is appropriate to place under a canopy or roof to protect it from the destructive burning rays.
When creating flower arrangements, you can select other plants suitable for cultivation in hanging planters. The color solution depends on the predicted final appearance of the area to be designed. Multicolor harmony will bring different varieties of the same flower culture, differing in the color of the buds. An interesting combination is created from different types of plants, placed in a premeditated order. There are a lot of variations, and each has its own unique flavor.
Self-made pots
In an effort to make outdoor hanging planters with your own hands, you need to think over their external design, fastening methods, and prepare the material. Outdoor planters suitable for landscape design can be made of different materials. Plastic containers are popular because they are easy to handle and have an attractive appearance. Metal, wood serves as a durable material. Possessing the skills of knitting and weaving, it is possible to create unique openwork products.
Wicker varieties. Having prepared willow rods, weave shapes in the form of a rectangular or rounded basket. Having mastered the basic skills, in the future you can create original products by imitating the figures of birds, animals and other objects.
Fabric pockets. The bags sewn from dense burlap or felt will add individuality. Cut out two parts of the desired shape, grind, leaving the top open. The front side is decorated according to your own taste. Use beads, ribbons, braid. A fastening is sewn from a strip of fabric or rope, a container with a plant is placed inside and hung, for example, on a fence.
Knitted flowerpot. It will not be difficult for craftswomen who know the technique of crocheting to make an openwork base for installing a flower pot in it. The yarn is selected to be moisture resistant and durable, which will allow you to maintain the original decor throughout the entire period of operation.
Wooden product. To make a simple design, you need to saw wooden blocks of the same length of about 20 cm. They are laid in the form of a square box, maintaining a checkerboard pattern. Self-tapping screws are used for fixing. Tied to each side of the rope, hung on any tree or hook.
Plastic container. Having a voluminous plastic container with a wide neck, fasteners are prepared from thick aluminum wire. Cut off three blanks 25 cm long. Bending one end of each wire with round-nose pliers, make a ring. The other end is folded in the shape of the letter "P". In the process, you need to control that the length remains the same. With an awl, three holes are made below the cut of the neck, into which the prepared hooks are inserted. The planter is ready for planting flowers and hanging on the bracket.
Varieties
Various items that have lost their operational qualities are well designed. With little effort, old watering cans, teapots, bottles and even shoes are turned into original plant pots. There are many options.
Having saved the cage, which was previously intended for keeping birds or hamsters, they effortlessly turn it into an original garden decoration. To do this, you only need to put a flower pot in the center and hang it on the selected object.
The expired ceiling chandelier is dismantled, leaving only cups for fixing containers with plants. If necessary, the decor is updated with painting.
A beautiful vase of an unusual shape is an independent decoration, but in combination with delicate buds, a complete sophisticated ensemble is obtained.
Forged hanging planters look prestigious and noble, harmoniously fitting into any compositional group.
Even a boring and inexpressive fence will be transformed by the placement of a container fixed with a simple fastener. After the flowers grow in it, a stylish corner is formed.
A leaky old watering can is cleaned of dirt, treated with sandpaper and given a bright decor by painting it with weather-resistant paint and painting.
Metal, plastic, enameled buckets act as a cache-pot. If they have already lost their external gloss, the problem is easily solved by painting.
Ceramic and plastic pots remain the most popular hanging planters. They can have different shapes and dimensions. You just need to think about a secure mount.
By attaching hooks to one of the sides of a regular packing box, it will be possible to hang it on the fence of a veranda, gazebo or balcony.
A small wooden tub in which flowers are planted will not take up space on the site if it is securely fixed to the wall of the garden house.
No need to throw away old bags, as they can play the role of a catchy planter. Usually they do not require preparatory restoration work. You need to put flowers planted in a pot in them and hang them using a strap.
Any old wheel can be turned into a hanging base for placing flowering plants. You can even hang it on a tree.
There are many options for transforming familiar things into comfortable and attractive hanging planters. Such creative activity does not require special skills.
Creating a complete image of a summer cottage or personal plot using a variety of ideas for making hanging planters allows you to independently transform existing objects into stylish decorative designs. Placing flowering plants in them creates a unique ensemble that charges with positive energy.
The charm of the most beautiful and well-groomed plants will not be complete if they are planted in assorted pots that differ in shape, size, material from which they are made. An excellent solution to the problem is a flower pot. Purchased in a store or made by yourself, they will complete the look of the collection on and help decorate a suburban area.
Selection of ready-made planters for indoor and garden plants
The range of ready-made planters in stores is incredibly large. In order not to get confused when choosing, experts advise paying attention to several aspects. Among them:
Most often, flower growers prefer flower pots made of polymeric materials, fired ceramics or clay, glass.
Plastic flower pot
The most affordable samples are made of plastic. They are easy to clean and can be used indoors and out. Due to the presence of drainage holes and the ability to easily make new ones, the plants in the pots are protected from rotting of the root system. Another useful quality is lightness, which is important if the grower needs a hanging planter for ampelous plants or a spectacular garland of their flower pots. Despite the thin walls, the container located in the sun does not heat up to critical temperatures, does not cause overheating of the soil and the root system.
If desired, plastic planters can be easily decorated with wood fragments, textiles, beads, or simply painted using safe and bright acrylic paints.
Shop-bought plastic planters are easy to transform with a skein of rope and glue. The side surface treated by him is tightly wrapped with twine or cord.
However, with a lot of advantages, plastic planters have a couple of disadvantages. They are not too resistant when used outside the home, and the products are by no means original.
Ceramic planters
Ceramics of various types have long been used to make flower pots and planters. Clay is incredibly malleable. It can take a variety of forms, natural material stores the warmth of the hands of the master, transferring it to the interior or summer cottage.
When choosing a ceramic planter, you should pay attention to the presence of a drainage hole, as well as to the outer coating.
Unglazed clay retains porosity, which improves the microclimate inside the pot, but reduces the durability of flower pots. When watering with tap water, sloppy stains may appear on the walls. Outside the house, the tank threatens with destruction:
Painted or glazed ceramics look very impressive and much stronger, but they warm up slowly and poorly remove excess moisture.
Due to the heavy weight of ceramic products, especially when making hanging flower pots with your own hands, you need a reliable fastening. It is easy to make with strong twine and macrame techniques.
Glass pot for flowers
Transparent or colored glass is a fragile, but spectacular material that will help decorate the interior, make the house unique.
At the same time, having shown imagination, making such a planter with your own hands for indoor flowers is not difficult at all.
As a base, you can take glass jars of a suitable size, glasses, vases, or even a small, rounded aquarium. By connecting the vessels with a rope, fixing them on a wooden stand, you can build a garland for flowers, make a planter for several pots at once.
How and from what to make a flower pot with your own hands
The decoration of the window sill and the garden will be flower pots, not found in the store, but made by the florist with his own hands. These samples are usually:
But, relying on his imagination, the grower needs to remember about the reliability of the future planters, safety and practicality. It is especially important to take into account the changeability of the weather and the influence of external factors if you have to assemble a planter for the garden with your own hands.
The most popular materials suitable for such work:
It is not necessary to go to the store for the original planter or materials for its manufacture.
One has only to look around to notice things that have gone out of use, but can turn into a unique interior or landscape object.
Do-it-yourself hanging planter for flowers
Man-made planters for the home are a great opportunity to show your imagination and demonstrate the ability to create practical and absolutely unique things.
The simplest option is a hanging macrame planter. Woven to the size of the pot, it:
In addition, the planter allows you to significantly improve the lighting of plants and simplifies care with a large number of flowers in the house.
When choosing a rope for weaving, it is better to give preference to samples made of wear-resistant fiber that does not stretch under load, does not fade in the sun and is not afraid of moisture. The same requirements apply to wicker planters for the street.
Floor and table flower pots
Large plants, such as indoor lemon, monstera, ficus or lush fern, are a great decoration for the house. To make them look even more spectacular, the pot can be placed in the original planter.
It is not always possible to choose a variant of a suitable design and size, and everyone can make a high floor planter for flowers on their own.
One option is cement pots. As a basis, a quickly solidifying mixture is taken, which is poured into the prepared form and after some time a strong casting-pot is obtained. Another way to use the material is to drink a textile flap with it and give it a suitable look, wait for the composition to dry. This planter can be used in the house and in the garden. For a greater decorative effect, the casting is painted and even covered with mosaics.
A box of a suitable shape will serve as an excellent planter for a large flower. It is pre-sanded, treated with a moisture-proof varnish or painted. To protect the floor and other surfaces, for example, a table under a wooden flower pot, a tray is placed on the bottom to collect excess moisture. The free space between the pot and the planter can be filled with coconut fiber.
To simplify the care of a large green pet, to protect the plant from moisture deficiency and drying out, a planter with a built-in watering system will help. You can buy it or make it yourself from auxiliary materials.
In addition to the container for the pot, there is a cavity for water and a tube for filling it, as well as a system of holes that supply moisture to the roots and remove its excess. A similar design for flowers of any size can be assembled at home. It will be useful both on the windowsill and in the garden, especially when the plants are deprived of the grower's daily attention.
The simplest self-watering planter can be made from an ordinary plastic pot. The main thing is that it should be the right size, and its bottom should have many large drainage holes. The shipping container in which the flowers arrive at the store is perfect. Under the drainage, a plastic mosquito net is laid at the bottom. It will not let the soil wash out. Several nylon cords are threaded through the holes so that their ends remain free to hang.
By placing such pots with home or garden flowers on gravel in a tray filled with water, you can be sure that the plant will not suffer from drying out. The liquid will rise to the ground along the rope, but will not cause root rot.
We make a hanging planter with our own hands - video
