How to properly clean an acrylic bathtub. A detailed guide to cleaning an acrylic bathtub Is it possible to wash an acrylic bathtub with lemon

Acrylic bathtubs are on sale today more often than cast iron or steel products. Light weight and relatively low cost make them popular among buyers. But at the same time, acrylic is a rather capricious material that requires careful and careful care.

Standard pollution

Modern acrylic has dirt-repellent properties. But in the process of active use by households, sooner or later, the bathroom “acquires” stains, its appearance and hygiene deteriorate significantly. Therefore, many housewives are thinking about the question of how to clean an acrylic bath at home?

The most common contamination for such products are as follows:

yellowness. In principle, it is not terrible for acrylic and is not its enemy, as, for example, for a bathtub made of cast iron or steel. However, acrylic is not immune from its appearance. The most common cause of yellowness is the poor quality of tap water;
lime scale and deposits. Salts of various metals contained in tap water eventually settle on the surface of the bathroom, forming limescale;
other spots that may appear during the operation of the product. These are stains from hair dye or other dyes. The protective top layer and the smooth surface of acrylic practically do not absorb such contaminants deeply. Therefore, it is possible to wash an acrylic bath from such troubles with any special means.

Forbidden tricks

Before you start cleaning such products, it is important to understand what cannot be used in such work. The following tools and improvised materials are undesirable:

abrasive detergents are powders containing crystals. They can scratch a sensitive surface, which will not only spoil the appearance of the product, but will become a breeding ground for bacteria that can easily penetrate into microcracks. In addition, the gloss will leave the surface of the acrylic, it will become dull and ugly. Abrasives include not only purchased products, but also improvised ones. For example, baking soda or citric acid undiluted in water, tooth powder, etc.;
chlorine or products containing it. Under its influence, the acrylic surface may darken and swell, due to the destruction of the polymer structure, pores will appear on it. The same applies to substances such as ammonia, acetone and various formaldehydes;
hard brushes, sponges, washcloths. An ideal alternative to such items is a soft cloth;
very hot water. It is no less dangerous to the acrylic surface than acetone or thinner. Under the influence of high temperature, the surface of the bath can be deformed.

Methods for certain types of pollution

Before using this or that means for removing various kinds of pollution (purchased or folk), it is necessary to test it on a site hidden from prying eyes. So it will be possible to preserve the appearance of the product, in case the cleaning composition is too aggressive.

How to wash an acrylic bath if it is not possible to purchase purchased cleaners? The most common and versatile remedy is the usual menthol toothpaste. The composition is applied to dirty areas with a soft toothbrush and gently rubbed into the surface. After that, rinse off with clean water.

Rust

Rusty stains from the surface of acrylic can be removed in several folk ways. For example:

soapy water and baking soda. Dissolve one teaspoon of liquid soap or two teaspoons of laundry soap shavings in 0.5 cups of water. Add 3 tablespoons of baking soda to the resulting composition, mix well. Treat dirty places with a cloth soaked in the product and leave for 30-40 minutes. Rinse with warm clean water;
a slurry of water and baking soda will quickly clean up fresh rust stains on an acrylic bathtub. Mix soda with water and wait until the grains swell, becoming a little softer. Apply the composition to the sponge and gently rub the dirty areas. Wash off with water;
an old rusty stain will be removed with finely ground edible salt. Sprinkle the stain with salt and gently rub it with a sponge dipped in turpentine. Then rinse with warm water and liquid soap.

Important! Any abrasive applied to the surface of acrylic should be extremely careful. Otherwise, you will have to solve another problem: how to remove scratches from the surface of the bath.

Yellowness

You can clean the acrylic bath from yellow spots with products that are sold in household chemical stores. They are designed specifically for acrylic coatings. For example, "Acrilan" or "Tim-Profi". These compositions can bring even too neglected plumbing products to their original form. Among other things, such products will disinfect the surface. However, they should not be abused. Too high efficiency is associated with a high content in these products of various chemical compounds and substances that harm not only the acrylic surface, but also the health of family members. Therefore, it is enough to use them for general cleaning of the bath (1-2 times a month).

An acrylic bath from yellowness can be washed using folk methods and available components that many housewives use. These include:

1. Table salt and wine vinegar. You need to act as follows:

in a glass container, mix wine vinegar and salt in a ratio of 2: 1;
heat the resulting solution in the microwave to a temperature of 70 degrees;
moisten a soft cloth in liquid and wipe dirty places;
leave for 30 minutes.

Important! Do not overexpose the solution otherwise it will damage the surface.

2. Citric acid. Dissolve 20 grams of lemon in one glass of water. Spread the resulting composition evenly over the surface of the product with a rag and hold for 30-40 minutes. After that, rinse with warm water. The bath after such a procedure will acquire the original snow-white color.

limescale

Limescale on an acrylic bath will remove citric acid or table vinegar. The bath should be filled to the top with warm water (35-40 degrees). Pour in 0.5 liters of table vinegar or pour 50 grams of lemon. Leave for 12 hours, then drain the water and rinse the bath with clean water. It is better not to use these two remedies at the same time. Vinegar can react with baking soda and corrode the surface.

How to properly care for an acrylic bath?

Acrylic withstands shock loads. However, scratching it with careless handling is not difficult. Small cracks are favorite places for dust, bacteria, dirt, and metal impurities contained in tap water. Therefore, such scratches should be avoided and metal buckets, basins, and pans should not be placed in an acrylic bath. Also, you should not bathe pets in such a bathroom. Their claws can scratch the surface.

The more often the acrylic is cleaned, the better for the material itself. Regular care and quick removal of stains will simplify further cleaning of the product and there will be no question of how to wash off stubborn dirt.

After each bath or other use, the tub must be thoroughly rinsed with clean water and a mild detergent. It can be liquid soap or dishwashing gel. After this procedure, excess moisture must be wiped with a dry cloth or towel. General cleaning of the acrylic surface of the sanitary ware should be carried out at least once a month. To do this, you can use substances that are more aggressive than liquid soap and dish detergent. The cleaning gel is applied to the inside of the bathroom, left for a few minutes, then washed off with water.

To prevent troubles such as lime deposits and yellowness, it is necessary to regularly check the serviceability of the taps. Constantly dripping water leaves rusty yellow marks on the surface of the bathroom..

If suddenly hard-to-remove spots or microcracks have formed on the bath, they can be cleaned with sandpaper, then rubbed with liquid acrylic and polished. But without skills, this procedure will not bring success. Therefore, it is better to entrust such a task to specialists.

Acrylic is difficult to clean only at first glance. Following the above recommendations, it will be possible to keep the bath snow-white and clean for a long time.

Cast-iron heavy fonts have not been seen in the bathrooms for a long time. Their place was firmly taken by modern snow-white acrylic bathtubs. They come with hydromassage and lighting, with transparent inserts and soft headrests. But over time, lime and soap deposits spoil the flawless surface. But there are simple tools that will allow you to clean acrylic at home.

Ways to clean acrylic bathtubs at home

Lightweight acrylic bathtubs are very durable, they do not rust and do not contribute to the growth of mold and mildew. But the disadvantage of the material can be considered instability to abrasion and scratches.

Acrylic bathtubs fit perfectly into any interior, the variety of shapes will allow you to choose the option that suits each project

Household chemicals

The inner surface of the bathtub is very smooth: dirt is less absorbed into the material. Not all cleaners are suitable for cleaning.

To clean the acrylic bathtub, use microfiber cleaning cloths: they gently clean the surface and quickly absorb moisture

Here is a list of substances and devices that damage and corrode acrylic:

metal washcloths and brushes, hard-coated sponges;
cleaning powders and abrasives that create scratches and microcracks;
chlorine-containing compounds that lead to yellowing of the walls of the bath;
too hot water;
acids, acetone and gasoline, ammonia, causing the bowl to darken.

In the store you can buy detergents suitable for acrylic surfaces. They carefully and effectively clean the bath from salt and lime deposits. These products come in the form of a thick gel or spray that dissolves dirt.

Some of the popular cleaners are:

Acrylan. The cleaning foam gently disinfects the surface of the bathtub and creates a protective film on it, which prevents the settling and accumulation of limescale. Do not wait for the product to dry completely: the time of its exposure to the walls of the bath should not exceed 10 minutes. Wash off the foam with running water. Acrylan should not be mixed with other cleaning compounds.
Acrylic can also be used to clean showers, sinks, pools
Cream Cif does not contain abrasives, which means it does not scratch the surface of the bath. The product easily dissolves dirt, suitable for frequent cleaning, but has little effect on difficult stains.
Cream Cif with a whitening effect is perfect for cleaning plumbing and white surfaces
Mr Chister. It acts gently and quickly, kills harmful bacteria and gives plumbing shine thanks to the acrylic polymer in the composition.
The composition of Mr. Chister is safe for the human body, the fragrance does not irritate the nasal mucosa
Team Pro. Defeats old and complex stains, eliminates yellowness and unpleasant odors in the bathroom.
Tim-Profi, like Acrylan, creates a protective shell on the surface of plumbing
Mr Muscle for the bathroom. Available in the form of a spray and when sprayed, it dissolves particles of dirt and plaque. After application, wait 2-3 minutes and rinse with warm running water.
Mister Muscle is suitable for cleaning all sanitary ware in the bathroom

It is acceptable to use dishwashing gels and washing powders diluted in a small amount of water. Domestos acrylic will not spoil if you spread it on the surface for no more than a minute, and then rinse it with a large stream of water.

A more budget alternative to Domestos is Sanoks. It is available in the form of a gel, foam and spray.

If the bath has not been cleaned for a long time and a water stone and hard deposits have formed on it, then you can use kitchen powder, for example, Pemolux, to remove them:

Dilute it with water to the consistency of gruel.
Add a spoonful of vinegar and 2 tablespoons of whiteness.
Apply to the surface and leave for 20 minutes.
Wipe the plumbing with a rag and rinse off the remnants of the product with running water.

Folk remedies

Thrifty housewives often use folk remedies that cost a penny and are on the shelf in the kitchen cabinet in every home.

Baking soda

Regular baking soda is great for removing any dirt on acrylic. Using it for cleaning is easy:

Dilute with water to the consistency of gruel.
Apply the mixture to the stained areas.
After 15 minutes, wipe the surface with a microfiber cloth and rinse off the remaining product with running water.

Often in cleaning, baking soda is mixed with coarse salt, but when cleaning acrylic bathtubs, this is strictly prohibited in order to avoid scratches on the surface.

Lemon acid

Citric acid is often used to remove plaque:

Dial two-thirds bath of warm water.
Pour one packet of citric acid.
After two hours, drain the water and rinse the bath with warm water.
Wipe the surface with a soft dry sponge.

50 grams of citric acid will replace expensive plumbing cleaners

Acid can be replaced with lemon:

Cut a citrus in half.
Grate the walls of plumbing with juice and pulp.
Wash off with warm water after half an hour.

Toothpaste

A non-abrasive toothpaste successfully fights stains and yellowness on the surface of acrylic:

Apply the product to a soft sponge or cloth.
Wipe contaminated areas of the bath.
Wash off the remaining toothpaste with warm water.

The most suitable option for cleaning sanitary ware is a white bleaching paste without particles

ammonia and hydrogen peroxide

Ammonia combined with hydrogen peroxide perfectly fights yellow spots on plumbing:

Mix the funds in equal proportions, add a little water.
Moisten a cloth or sponge with the resulting liquid.
Wipe contaminated areas.
Wash off with warm water.
Wipe off any remaining product with a dry cloth.

Hydrogen peroxide can be used not only for treating wounds, together with ammonia, they give an excellent result when cleaning acrylic sanitary ware.

Vinegar

Finally, apple cider vinegar is suitable for cleaning acrylic bathtubs:

Take a full bath of warm water.
Pour a bottle of 6% vinegar.
Wait 12 hours, then drain the water.
Rinse the surface with warm water, wipe with a napkin.

When working with vinegar or ammonia, remember to take precautions. Wear rubber gloves and long sleeves. If you have a sensitive nasal mucosa, complete your “protective suit” with a mask or respirator.

Can I use a steam cleaner

The steam cleaner is able to remove the most old dirt and yellow stains. Hot air disinfects the surface and makes it shiny.

Stubborn stains can be removed with a steam cleaner

How to avoid plaque and stains

The quality and composition of water in many regions leave much to be desired. But still, there are several preventive measures that will help extend the life of plumbing and protect it from stains and ugly deposits:

put an additional filter on the water pipe to reduce the content of impurities;
bath treatment with furniture polish, which forms a protective shell on the walls and prevents darkening;
cleaning the surface after each use and thorough cleaning once every two weeks.

Acrylic is a durable but rather capricious material that needs careful maintenance.

If you follow simple recommendations for care and carefully use household chemicals, acrylic plumbing will not cause trouble and will look perfect. To keep the bath in excellent condition, it is enough to allocate only an hour a week for cleaning.

Acrylic bathtubs have won the love of hostesses all over the world with their smooth surface, glossy sheen and flawless whiteness. Lighter, plastic models of various shapes and sizes have successfully replaced clumsy cast-iron washing containers.

Happy owners of acrylic sanitary ware often wonder how to wash the font in order to preserve the original appearance of the product for a long time. In fact, care should be taken in this matter, since not every detergent is suitable for mechanically fragile plastic. In this article, we will tell you how to care for an acrylic bathtub so as not to spoil it.

Advantages of acrylic

Many homeowners are concerned about how to clean an acrylic bathtub, as they have heard about the capriciousness of plumbing fixtures made from this material. In fact, acrylic products are much easier to care for than steel or cast iron wash basins.

Ease of cleaning is due to the following properties of the polymer:

Low porosity. There are practically no pores on the acrylic surface, so it does not absorb dirt, but repels them, so that daily cleaning of the acrylic bath can be done simply with warm water and a soft cloth.
High smoothness. The smooth surface of acrylic does not allow dirt and harmful microorganisms to clog into the structure of the material, so it is easy to clean the bowl even without the use of abrasive detergents.

Note! Manufacturers often talk about the "self-cleaning effect" that high-quality acrylic products have. This term means that their ugly surface repels dirt, so you have to clean the bath less often. In most cases, you can wash the acrylic bath with warm water or soapy water.

Typical pollution

Since polymer plumbing fixtures have replaced cast-iron and steel ones relatively recently, the question of how to clean an acrylic bathtub at home is relevant for many responsible housewives. Acrylic products repel dirt, however, intensive use of the device leaves its mark, which worsens the appearance and hygiene of the wash container. Most often in the process of using the bath, the following pollution occurs:

Important! Properly caring for plumbing so that old stains do not appear on it is much easier than washing an acrylic bathtub. Therefore, it is important to regularly rinse the inside of the bowl with running warm water, and then wipe it dry with a soft cloth after each use.

Many housewives do not know how to clean an acrylic bathtub, so they use completely inappropriate products that corrode, scratch or otherwise damage the product. Improper care is the most common cause of premature wear of acrylic sanitary ware. Manufacturers recommend that you refrain from using powders for cleaning such bathtubs, instead it is better to use a delicate, gentle washing gel or cream. To care for acrylic sanitary ware, 4 categories of cleaning products are used:

Please note that if you are not sure how to wash an acrylic bathtub, it is better not to risk it in vain. It is better to try what effect the composition will have on a small area of \u200b\u200bthe surface, and only after that continue cleaning the product.

"Forbidden" tricks

High quality acrylic plumbing is just a godsend for modern housewives who save time on everything they can. With proper use, it retains whiteness and shine even without the use of special tools. However, washing an acrylic bathtub with the wrong household chemicals can ruin the product. Manufacturers recommend not to use for care:

Prevention

An important measure to combat contamination on the surface of acrylic hot tubs is proper care in compliance with the manufacturer's recommendations. Properly using the product is much easier than washing an acrylic bath at home. Compliance with these 4 simple rules will significantly shed the life of plumbing:

Remember that using a low-quality or inappropriate acrylic bath cleaner, you are not getting rid of pollution, but of expensive plumbing!

Video instruction

In the plumbing market and have already occupied their niche. Acrylic models attract with their variety of shapes, technical characteristics. The antibacterial qualities of the material make acrylic bathtubs even more in demand. But since acrylic does not react well to all detergents, it is recommended to find out in advance how to wash an acrylic bath so as not to damage its surface.

The frequency of hygienic care of the acrylic structure depends on the hardness of the water. The harder the water in the tap, the more often the bath is washed.

Acrylic is sensitive to abrasives. After them, scratches appear on the material. Preparations containing acids, alkalis and solvents are also contraindicated for use. They make the walls and bottom of the bowl porous, which contributes to the rapid accumulation of dirt on the surface of the font. In addition, the original luster of acrylic is lost.

So that the acrylic bath does not suffer from the effects of detergents, it is better to study the general recommendations in advance than to wash it at home:

The use of abrasives will cause scratches. Therefore, a ban has been imposed on the cleaner in powder form. Only liquid products are used.
All material used to wipe the acrylic bath should be soft. Do not use washcloths with increased rigidity, brushes. After them, scratches remain, which then have to be fought and
Cleaners containing acids, alkalis, gasoline are contraindicated. All of them destroy the structure of acrylic.
To reduce the degree of pollution of the bathing place, it is recommended to wipe it every day with soapy water (laundry soap is used). After that, the soap is washed off with running water from the shower and the walls and bottom are wiped with a dry soft cloth.
There is a deformation of the material from a temperature of more than 100 ° C.
The new cleaner is tested on a small piece of the font, and hidden from view. If half an hour after the product is washed off, no changes are visible in this place, then you can use it without fear.
To restore the shine of the font, a napkin soaked in furniture polish will help.
In addition to treating the bowl with detergents, it is recommended to disinfect it with special preparations once every 6 months.
Tightening the faucets will save the font from rusty spots.
To prevent scratches from the claws of animals when they are bathed, it is recommended to lay a rubber mat on the bottom. In addition, it will be more convenient for them to stand, it will not be slippery.
It is not recommended to put metal objects on the bottom.
Do not use an acrylic tank for washing clothes.

All work is carried out with rubber gloves.

Using Acrylic Bath Care Products

On sale you can find special cleaners for processing acrylic plumbing. There is an inscription on the label that allows them to be used.

Industrial cleaners

Caring for an acrylic bath at home is greatly facilitated by preparations developed by well-known manufacturers:

To remove mold, rust, salt stains, "Acrilan" is used. The drug works quickly and efficiently. It covers the font with a protective film, which gives it a glossy look.
The brand line of cleaners from the Revak company performs 3 functions at once: cleaning, disinfection and restoration of the protective layer.
Koipa produces Acryl Polish preparations. These are cleaning gels, tools for restoring the surface of the bowl and polishing it.
Eco-product "Team Profi" - for those who prefer to use an eco-product. It is recognized as environmentally friendly, does not contain harmful elements. With its help, oily stains, plaque from salts are removed, an unpleasant odor is removed, the bathing place is disinfected.
You can remove the yellowness of the bathing place, rust in stains, greasy deposits, lime marks with the help of the universal preparation "Cif". It is used to clean any plumbing, including acrylic. Abrasive particles are absent in its composition.
Liquid "Bass" is used for everyday surface treatment.
Spray "Cinderella" in its action refers to effective cleaners. It is not recommended to work with it without a respirator, because it emits a pungent odor.
The ability to prevent the appearance of fungus and the accumulation of dirt makes the Cleaner line in demand. These are universal products that are used both for fonts and for other plumbing. With their help, stains of grease and rust are removed on acrylic material.

The dosage of the remedy, how to use it - all this is done strictly according to the instructions. Often all conditions can be found on the label. There are rules on how to care for the bathroom and general recommendations for the use of household chemicals on an acrylic surface:

Chemistry in liquid form is applied with a soft sponge for 5-20 minutes. At the end of time, the bowl under pressure is thoroughly washed with water.
Sprays after spraying are left on the surface in time strictly with the instructions. Once the time is up, the product is washed off with water.
The cleaned bath is wiped dry with a soft cloth.

Folk remedies

Folk remedies are no less effective in combating pollution on the surface of acrylic. The choice of means is determined by the nature of the pollution:

Limescale: A non-concentrated citric acid solution is used. Vinegar in a volume of 1.5 liters can replace it.

50 grams of acid is poured into a full bowl of water at 50 ° C (hot). A full bath is left for 2 hours so that the salts on the surface begin to soften. After 2 hours, the tank is freed from the liquid with acid, the surface is rinsed under pressure, everything is wiped dry with a soft cloth.

Yellowness: for whitening, a mixture of apple cider vinegar, lemon juice is prepared. You can replace lemon juice with lemon, based on 20 grams per glass of liquid.

The yellowed places on the acrylic surface are wiped with the finished mixture. The bath is left in this state for several minutes, washed with a strong stream of water, wiped dry.

Traces of rust: effectively cleaned with soda. Liquid is added to the soda to make a slurry. It gently covers places with traces of rust, without trying to rub the problem area. After 15 minutes, everything is washed off with a strong pressure of water.
Dirt that has entered deep: a small dose of toothpaste is applied to a cloth. It rubs the problem area.

Cleaning an Acrylic Whirlpool Bathtub

At the hydromassage, it is important to clean the spray nozzles through which water flows out under pressure in the specified directions. The nozzles are connected to the circulation pump. He creates this pressure. Drops of water remain on the nozzles, which provokes the appearance of mold, salt deposits.

The hot tub is cleaned once every 30 days. In parallel, the surface is disinfected.

The tank is filled with warm liquid so that its level exceeds the location of the nozzles by 7 cm.
The air supply function is turned off.
Dishwasher detergent (50 ml) is added to the water.
One glass of vinegar acts as a disinfectant, which is also added to a container of water.
The hydromassage mode is activated for 15 minutes. During this time, dirt should be removed from the small holes of the nozzles.
The hydromassage is turned off and the drain hole of the bath is opened. All dirty liquid will come out.
When the bowl is empty, the drain hole closes again and water is drawn into the font again.
The hydromassage function is activated. At this point, the nozzles are washed out of the detergent.
After 10 minutes, the liquid descends into the sewer.
The walls of the tank are wiped dry.

Means and methods for disinfecting an acrylic bath

The surface of the acrylic font is periodically cleaned and disinfected. It is not difficult to perform this procedure, since you can buy special materials for this on sale.

The reservoir is filled with 20°C liquid.
Special developments are used for these purposes: "RAVAK Desinfectant" or "Tim Profi". Are added to water.
After 10 minutes, the bath is completely emptied.
To avoid irritation on the skin, the surface of the bowl is well washed with a shower jet.
The surface is wiped with a dry cloth.

What does not "love" acrylic

Summing up, information about products harmful to acrylic is summarized:

abrasives - scratches appear on the surface. Soda is no exception. It is used only in the form of gruel, not rubbed, but applied to spots;
products containing chlorine - gloss is lost, the material tarnishes. For a hydromassage installation, this is the deformation of the gaskets;
solvents, including acetone - the structure of acrylic is destroyed, which leads to deformation of the material;
ammonia liquids and ammonia - like solvents, deform the acrylic bowl, but to a lesser extent;
alcohol, alkali, acid - cause cracks on the surface.

Too hot water deforms the acrylic font.