A special feature of the low pollutant burners offered by the site is the new mixing device. Thanks to the directional supply of combustion air and combustible gas, intensive flue gas recirculation is achieved. All structural elements of the WG 20 gas burner are easily accessible, electrical plug connections are clear and cannot be mixed up. Accordingly, access to the elements during repair work is also simple. The mixing device can be adjusted to the desired power using the adjusting screw. When carrying out maintenance work on the mixing device, the burner can be easily removed back. When working on the fan wheel, the motor block can be removed by suspending it for the duration of the work. It is convenient to carry out repair and service work from the side of the front wall of the boiler. Combustion manager: The digital combustion manager automatically manages and controls all burner functions. In addition, the digital combustion manager enables the burner to communicate with other systems. Connection to the information bus allows the specialist to monitor the sequence of functions and perform diagnostics in case of malfunctions.
Purpose
They are used on various types of heat generators, for example, on warm air generators.
Peculiarities
The material, design and types of protection are designed for indoor operation. The permissible ambient temperature in this case should be from -15 to +40 degrees.
The Weishaupt WG 20 gas burner is a modern model designed for indoor use. Mounted on inflatable boilers, heat generators of various designs, hot water installations. Burners WG 20 are representatives of the premium class and, subject to safety regulations, installation and operation rules, provide long-term safe, environmentally friendly heat supply.
Technical data:
- Power is regulated within 35-200 kW;
- Regulation of several types: single-stage, smoothly-two-stage, modulating;
- Automatic start, activity control, adjustment and emergency shutdown;
- Digital combustion manager on two microprocessors;
- The fuel used is natural and liquefied gas;
- Execution: Low NOx;
- Gas fittings for connection are included in the scope of supply.
General description:
The WG 20 gas burner was developed by the German company Weishaupt for the equipment of household boiler rooms with air, steam and hot water boilers, air conditioning systems, and solving various technological problems. Not suitable for outdoor use.
Like other models with sizes 5-40, the WG 20 burner is able to work for a long time without direct human intervention. At all stages of the launch function, checking the status of system elements, shutting down and restarting are automated.
The adjustable power range from 35 to 200 kW makes it possible to successfully use the WG20 burner for servicing boiler houses in private houses, cottages, industrial premises.
Main characteristics:
- Digital multifunctional combustion manager W-FM 25 provides reliable control over the functioning of the system. Two microprocessors working simultaneously perform the functions of mutual verification, ensuring that all data is tracked clearly.
- Compact design creates conditions for convenient transportation and easy installation, requiring a minimum of space for installation. The casing made of high-strength material can be quickly removed, providing convenient access for maintenance, replacement of any of the components or mechanisms.
- Various modifications of Weishaupt WG 20 gas burners have performance variations:
LN - single stage,
Z-LN - two-stage,
ZM-LN - modulated.
- The connection of the information bus ensures the output of information about the functioning of the burner and the system as a whole to a computer and remote adjustment of settings.
- The WG 20 burner is equipped with multifunctional gas block W-, which include a gas pressure switch (with a tightness control function), a gas pressure regulator (equalizing differences in the fuel supply), 2 servo drives (opening and closing the gas supply), a gas filter.
The W-ZG 01 igniter, gas pressure switch and air pressure switch ensure the safe operation of the WG 20 burner. At any stage of operation, in the absence of a flame, insufficient gas pressure in the gas pipeline or a cessation of air supply, the burner is switched off in an emergency. After 10 minutes, the system re-checks the functions and, if the indicators comply with the standards, starts. If the indicators are insufficient, the check is performed again after 10 minutes. After five unsuccessful starts, the burner is blocked for an hour.
The option of pressure equalization when supplying gas to the burner and electronic ignition ensure even economical fuel consumption. The applied Low NOx technology guarantees a low presence of harmful substances in flue gases, which complies with current international environmental standards.
Weishaupt WG 20 gas burners are fully adapted for use in Russia, certified by Rostekhnadzor and GOST R. If necessary, components, consumables and spare parts are delivered from the warehouse in a short time, which allows for prompt adjustment even during the heating season.
Professional installation, proper use and timely maintenance of quality original WG 20 burners guarantee you a comfortable, uninterrupted heat supply for a long time.
Please note that the price does not include discounts. To find out your discount - contact us.
Burners WG 5-40
Burners WG 5-40
Weishaupt WG burners
Gas burners Weishaupt WG 5-40- household burners with power from 12.5 to 550 kW. Burners can be operated with natural gas or LPG. The burners have an aluminum body with a casing made of high-strength noise-absorbing plastic. All components and mechanisms of the burner are accessible, which makes it possible to quickly carry out the necessary service work. Various configuration options and types of burner regulation allow the use of burners Weishaupt WG 5-40 not only on heating boilers, but also on other installations. For example: ventilation and central air conditioning systems and hot air generators, drying and painting booths, as well as for industrial purposes.
Weishaupt WG burners - natural gas
| A photo | Choose a model | Power | Regulation | Ramp | Availability |
| 12.5 - 50 kW | single stage | ½" | In stock |
||
 | 40 - 110 kW | single stage | ¾" | In stock | |
| 25 - 110 kW | two stage | ¾" | In stock | ||
| 25 - 110 kW | Modulated | ¾" | In stock | ||
 | 80 - 200 kW | single stage | 1" | In stock | |
| 35 - 200 kW | two stage | 1" | In stock | ||
| 35 - 200 kW | Modulated | 1" | In stock | ||
 | 40 - 350 kW | Modulated | ¾" 1" 1½" | In stock with ramp 1" and 1½" |
|
 | 55 - 550 kW | Modulated | ¾" 1" 1½" | In stock with ramp 1½" |
Burners Weishaupt WG - LPG
| A photo | Model | Power | Regulation | Ramp | Availability |
| WG 10 F/1-D, ver. LN | 40 - 110 kW | single stage | ¾" | On order |
WG 10 F/1-D, ver. Z-LN | 25 - 110 kW | two stage | ¾" | On order | |
WG 10 F/1-D, ver. ZM-LN | 25 - 110 kW | Modulated | ¾" | On order | |
WG 10 F/0-D, vers. ZM-LN | 25 - 110 kW | Modulated | ¾" | On order | |
| WG 20 F/1-C, ver. LN | 80 - 200 kW | single stage | ¾" | On order |
WG 20 F/1-C, ver. Z-LN | 35 - 200 kW | two stage | ¾" | On order | |
WG 20 F/1-C, ver. ZM-LN | 35 - 200 kW | Modulated | ¾" 1" | On order | |
| WG 30 F/1-C, ver. ZM-LN | 40 - 350 kW | Modulated | ¾" 1" 1½" | On order |
| WG 40 N/1-A, ver. ZM-LN | 80 - 550 kW | Modulated | ¾" 1" 1½" | On order |
Parameterization.
Possibility of direct setting using function buttons (WG10-WG40 vers. ZM-LN)
operation on hot water systems with cyclic operation (forced shutdown every 24 hours)
possibility of operation on hot air generators and steam boilers of groups ll and IIl, as well as group IV (as an option with W-FM 21).
The built-in eBus connector offers the following functions:
– connection to a PC for displaying the operation process and setting function parameters
– remote monitoring and diagnostics via automatic modem
– connection to modern building automation systems
– pre-purge time set on PC via eBus
Large power range
The large power range from 12.5 to 550 kW enables individual use on various heat generators and ensures the implementation of any technical task.
Electronic ignition
The W-ZG01 electronic igniter, which is used on all Weishaupt W-series burners, is characterized by high reliability and low energy consumption.
Combustion managers W-FM10 and W-FM20 are equipped as standard with leakage control
To control the tightness of gas valves, a built-in relay for monitoring the minimum gas pressure is used. In this way, tightness control is carried out without additional parts and costs.
Gas multiblock
The new gas multiblock includes the following components and features:
servo gas pressure regulator to maintain it at a constant level
2 solenoid valves (class A)
filter
gas pressure switch
If the gas pressure is too low, the gas shortage program is started. In addition, the gas pressure switch is used for automatic tightness control.
The Weishaupt WG 40 gas burner is one of the latest technological innovations from the well-known German brand. Equipped with innovative developments, it was possible to create a burner with a high level of performance and maximum automation of the process with a significant reduction in installation and maintenance costs. In addition to reliability and ease of use, the equipment is distinguished by economical fuel consumption and reasonable energy consumption.
Technical data:
- Smooth two-stage, frequency power control in the range from 55 to 550 kW.
- Microprocessor-based combustion manager W-FM 25, which automatically controls the start-up, operation, control and emergency shutdown of the burner, the status of all connected systems.
- Work on natural gas E and LL, liquefied gas.
- LN version with reduced NOx emission, in accordance with current environmental regulations.
- Optimal scope of supply for installation and commissioning;
- Low noise and compact, easy to maintain design.
General description:
The WG 40 gas burner is Weishaupt's advanced development for the installation of heating systems and hot water in residential and industrial buildings, for use in process plants. Designed for indoor use and connection to typical heat generators, steam and hot water installations for intermittent and long-term operation (with scheduled control shutdown every 24 hours).
The digital combustion manager, based on two microprocessors that mutually control each other, automatically supports all work processes in the burner, controlling the compliance with the specified parameters of the fuel supply, air, flame presence, system tightness. If deviations are detected (insufficient gas or air pressure, leakage, absence of flame, etc.), the burner is automatically switched off and then restarted after a second check.
All information is displayed on a liquid crystal display and a computer connected via an information bus. The control is carried out by the keys on the display or remotely. Using a modem, alarms about violations of work processes can be transmitted by auto redial. The easy-to-understand interface allows day-to-day operation of the burner for users without special qualifications. It is possible to print graphs showing all characteristics to analyze the functioning of all systems. Encoded information about occurring errors allows you to quickly and clearly identify and resolve problems.
Main characteristics:
Electronic devices that control all processes of fuel supply and combustion ensure perfectly accurate compliance with the programmed indicators. Thanks to this, the Weishaupt WG 40 gas burner is characterized by increased reliability and durability, combined with maximum comfort and safety of use.
The W-MF multifunctional multiblock, which may include: RFS pressure regulator, two class A solenoid valves, gas filter, gas and air pressure switches, performs the most important functions at each start-up and during the operation of the burner:
- tightness control;
- checking the voltage level, pressure of the fuel and air supplied to the system;
- alignment of emerging minor differences to ensure uniform and high-quality fuel combustion;
- servo check.
The equipment is fully adapted for use in Russia, has all the necessary certificates. Professional installation, compliance with operating rules and timely maintenance guarantees high quality work for a long time.
Installing a gas burner WG 40 is an economical solution among models of similar power, providing high performance along with safety and comfort of use.
Please note that the price does not include discounts. To find out your discount - contact us.
